Enable the masterclear.allow_retain_esim_profiles_after_fdr for
checkbox is visible
Bug: 188093779
Test: build pass
Change-Id: I5745d152642d14c9a28d1831a59f64fb65d95394
Bug: 171947164
Test: manually, no read fail found
Change-Id: I35bbca1aec39e6fb6133386b96efd727a9f74099
Signed-off-by: Denny cy Lee <dennycylee@google.com>
Previously, we ran modprobe command for every .ko file listed in
init.insmod.*.cfg. Let's move to a different approach where we call
modprobe with the following command line.
modprobe -b --all=/vendor/lib/modules/modules.load
This will insmod all modules listed in modules.load except for those
that are mentioned in the blocklist at
/vendor/lib/modules/modules.blocklist
A common reason for a module to be on the blocklist is that it must only
be loaded under a certain condition like when a specific service is
launched.
Bug: 190652328
Change-Id: I37dfc83cbc90534243765f6985bc53f3fa83aef0
In this commit, we update the interface combination
for P21.
Bug: 191020902
Test: local test on PP23935602 build.
Check STA+STA, STA+SAP, STA+P2P and STA+NAN are workable.
Change-Id: I424c4ea854f3a4f7b615038db8d63729fd32adda
In b/183180525, vendor mentioned they won't provide
fw symbol table (logstrs.bin) in terms of their internal
concern. Hence, remove wifi fw symbol table from dumpstate.
Bug: 191429306
Test: build pass, device can connect to AP.
Change-Id: I54a012f619f113a2567a93707731b5c4802b1da8
-. RECEIVE_SMS and READ_PHONE_NUMBERS permissions are no longer used.
-. Add the ACCESS_FINE_LOCATION permission for iOS WiFi D2D which was approved in b/188150877.
Bug: 188150877
Fix: 162937804
Test: Manual tested on Barbet.
Change-Id: I518275717ebd2b81bb888eaddc58222fe92b92c1
Since all the WHI phones have 6GB+ RAM, we should be using at least a
6GB dalvik-heap config, as being done in pixel5 and older devices.
Test: build and boot
Bug: 189738006
Change-Id: I5a232d2901dec819b225812d023d2e5a43d3e0a6
This CL also removes wait_for_strongbox, which is broken because it
looks only for keymaster implementations, not keymint. But it's also
unnecessary due to reorganization of the way keystore and vold start
up.
Bug: 177729159
Test: boot & VtsAidlKeyMintTargetTest
Change-Id: I6c5210356396b2079e036e94bb909f3a1a31e6c6
Add ML_ACC parameters agreed in ag/14877105 as a powerhint
Test: pushed powerhint.json to device, sent ML_ACC powerhint, observed a
change to /sys/kernel/vendor_sched/nnapi_uclamp_min
Bug: 191241561
Change-Id: Ic974cd0b3bbcb98532940520cfd2684d156b9330
The property should be based on device max refresh rate.
Move to raviole config files.
Bug: 177493042
Test: build
Change-Id: I34c42c87e92208e9f8140197e00f713aafaa63ba
Bug: 176195960
Test: no Permission denied while accessing the file node
Signed-off-by: Jack Wu <wjack@google.com>
Change-Id: Ia70c110de8bc1b6166c57e9c3df3d4f43f23a428
Kernel modules on the blocklist are not automatically loaded during
second stage init. Modules are often put on the blocklist if we want
them to get loaded only under certain circumstances.
Bug: 190652328
Change-Id: Ib67463555f498f4dc85d5d175e0bf9e4150771dd
The cancelling behavior in MTP has two behaviors.
1. cancel requests one by one
2. batch cancel all requests
This patch will set the property to true to enable
batch cancel all requests.
Bug: 181729410
Test: build pass
Change-Id: I8d92cc676ff7be8fd22a574b32653bafc028b801
Now HWUI app is using ADPF already, for those non-HWUI app (probably
mostly games), let us try to just use FPS based boosting only.
Bug: 177493042
Test: build
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: I63fe7ff6edcb57819461a8c0ed5f3f43c26e0137
When display and SF falls out of sync, there is a possibility that while
display holds on to a buffer, a composed buffer could be waiting in the
decon thread. Since maxFrameBufferAcquiredBuffers is 2, GPU will have to
wait for display to swap out the buffer it is currently presenting to be
able to compose for the next frame, which leads to SF missing its
timeline for subsequent frames.
Bug: 190842189
Test: perfetto
Signed-off-by: Devika Krishnadas <kdevika@google.com>
Change-Id: I434e8644cff2538589c1c9b2bf731afae0aa8980
Previously, we copied all available kernel modules into the vendor_boot
ramdisk except for approx. 14 modules that we explicitly excluded.
Going forward, the kernel build will distribute the two additional files
vendor_boot.modules.load and vendor_dlkm.modules.load which define,
respectively, the lists of modules that should be loaded from
vendor_boot and vendor_dlkm.
The contents of the two *.modules.load files will be copied almost
verbatim into modules.load files in the respective images except for the
fact that the directory names of the .ko files are stripped. So, for
example, kernel/net/core/pktgen.ko becomes just pktgen.ko.
Additionally, we only copy those .ko files into the vendor_boot image
that are listed in vendor_boot.modules.load. On the other hand, the
vendor_dlkm partition image will contain all .ko files regardless of
whether they are listed in vendor_dlkm.modules.load.
Bug: 190652328
Change-Id: Ibda5b9368547ad089575333e2566697ec0e8465f
android.software.verified_boot.xml should be copied to TARGET_COPY_OUT_VENDOR instead of TARGET_COPY_OUT_PRODUCT
Bug: 190401885
Test: run cts-on-gsi -m CtsSecurityTestCases -t android.security.cts.VerifiedBootTest#testVerifiedBootSupport
Change-Id: Id17176f07e6ae8843f71b10ad9d01b18640fe675
Integrated CHPP- chpp-20210524-39bf8f5.zip
Adjust the noise table for GPS
False L5 SNR removed by adding valid peak check to L5 CN0
Fixed for SyncIn request to time out within 3 seconds
Support multiple measurement requests
Estimated better accuracy uncertainty in GLNS Only fix
Request UTC time from framework even if the request type is BREADCRUMB
Fixed Reset checking timer for default value of CpResetInvalidateSec to properly work
Bug: 188843280
Bug: 189793458
Bug: 188857474
Bug: 188127870
Bug: 188737899
Bug: 185200717
Bug: 184770261
Bug: 185884684
Sanity test: 190960119
Test: build pass
Change-Id: I969b3ce240583d726f28e93da76c74f1c369a505
SurfaceFlinger IPC improved with mid and big cores, relaxing cpuset will
help improve its efficiency. For render engine, we set uclamp.min to
skip scheduling on little cores.
FWIW, we let the RT scheduler figure out what is good for perf/power.
Bug: 170507315
Bug: 191054286
Test: Build and boot
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: I880cf549e33a3a2f629e8260366c4ce8c34c3ae6
Specify ownership to system and r/w permissions to user/group.
Allows dumpstate to access /dev/trusty-log0.
Bug: 188285071
Test: lshal debug android.hardware.dumpstate@1.1::IDumpstateDevice/default trusty
Change-Id: I935cb9dd11d1e0968ab0e2c9d7349de336502e7c
The cancelling behavior in MTP has two behaviors.
1. cancel requests one by one
2. batch cancel all requests
This patch will set the property to true to enable
batch cancel all requests.
Bug: 181729410
Test: build pass
Change-Id: Iad744e27e6f843ae22fc499efbb803be51e1b820
Bug: 174189876
Test: check bugreport for #19 data.
Signed-off-by: Super Liu <supercjliu@google.com>
Change-Id: I288d8079528f99834a1867ab973535d4e7b383b6
Add ADPF_DISABLE_TA_BOOST hint for masking TA boost when ADPF is active
Test: build, boot to home
Test: adb shell cat /sys/kernel/vendor_sched/ta_uclamp_min
Bug: 177493042
Change-Id: I6bbeebf80fe4ba7b1e957cde5ed0d4202a2da818
