Evolution-X-Tensor/device_google_gs101
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
device_google_gs101/device.mk
SaiChand Duppala 8796579a5f Disable dumpstate strict-run flag in gs101 
The change disables the dumpstate strict-run flag in gs101 devices, which is enabled by default. Disabling this flag increases the timeout for capturing incident report to 120 seconds, from the default 20 seconds. This is done because 20s isn't enough to capture incident report proto in some cases, especially when device is throttling.

Bug: 330400782

Test: Booted a gs101 device with the change. Then manually thermal throttled the device and captured bugreports. In some tests Incident report took a lot more more than 20s, and in all these cases it was succesfully captured.
Change-Id: I8c4ee4e4412c517822776a9b10bbdad7da1c1213
2024-04-25 01:11:50 +00:00

1137 lines
42 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2011 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
include device/google/gs-common/device.mk
include device/google/gs-common/gs_watchdogd/watchdog.mk
include device/google/gs-common/ramdump_and_coredump/ramdump_and_coredump.mk
include device/google/gs-common/soc/soc.mk
include device/google/gs-common/soc/freq.mk
include device/google/gs-common/modem/modem.mk
include device/google/gs-common/aoc/aoc.mk
include device/google/gs-common/thermal/dump/thermal.mk
include device/google/gs-common/thermal/thermal_hal/device.mk
include device/google/gs-common/pixel_metrics/pixel_metrics.mk
include device/google/gs-common/performance/perf.mk
include device/google/gs-common/display/dump.mk
include device/google/gs101/dumpstate/item.mk
include device/google/gs-common/radio/dump.mk
include device/google/gs-common/gear/dumpstate/aidl.mk
include device/google/gs-common/camera/dump.mk
include device/google/gs-common/gps/dump/log.mk
include device/google/gs-common/widevine/widevine.mk
include device/google/gs-common/sota_app/factoryota.mk
include device/google/gs-common/misc_writer/misc_writer.mk
include device/google/gs-common/gyotaku_app/gyotaku.mk
include device/google/gs-common/bootctrl/bootctrl_aidl.mk
include device/google/gs-common/betterbug/betterbug.mk
ifneq ($(filter oriole raven bluejay, $(TARGET_PRODUCT)),)
include device/google/gs-common/bcmbt/dump/dumplog.mk
endif
TARGET_BOARD_PLATFORM := gs101
DEVICE_IS_64BIT_ONLY ?= $(if $(filter %_64,$(TARGET_PRODUCT)),true,false)
ifeq ($(DEVICE_IS_64BIT_ONLY),true)
LOCAL_64ONLY := _64
endif
AB_OTA_POSTINSTALL_CONFIG += \
RUN_POSTINSTALL_system=true \
POSTINSTALL_PATH_system=system/bin/otapreopt_script \
FILESYSTEM_TYPE_system=ext4 \
POSTINSTALL_OPTIONAL_system=true
# Set Vendor SPL to match platform
VENDOR_SECURITY_PATCH = $(PLATFORM_SECURITY_PATCH)
# Set boot SPL
BOOT_SECURITY_PATCH = $(PLATFORM_SECURITY_PATCH)
PRODUCT_SOONG_NAMESPACES += \
hardware/google/av \
hardware/google/gchips \
hardware/google/graphics/common \
hardware/google/gchips/gralloc4 \
hardware/google/graphics/gs101 \
hardware/google/interfaces \
hardware/google/pixel \
device/google/gs101 \
device/google/gs101/powerstats \
vendor/google_devices/common/chre/host/hal \
vendor/google/whitechapel/tools \
vendor/google/camera \
vendor/google/interfaces \
vendor/google_devices/common/proprietary/confirmatioui_hal \
vendor/google_nos/host/android \
vendor/google_nos/test/system-test-harness
LOCAL_KERNEL := $(TARGET_KERNEL_DIR)/Image.lz4
# OEM Unlock reporting
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
ro.oem_unlock_supported=1
ifneq ($(BOARD_WITHOUT_RADIO),true)
# Include vendor telephony soong namespace
PRODUCT_SOONG_NAMESPACES += \
vendor/samsung_slsi/telephony/$(BOARD_USES_SHARED_VENDOR_TELEPHONY)
endif
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
#Set IKE logs to verbose for WFC
PRODUCT_PROPERTY_OVERRIDES += log.tag.IKE=VERBOSE
#Set Shannon IMS logs to debug
PRODUCT_PROPERTY_OVERRIDES += log.tag.SHANNON_IMS=DEBUG
#Set Shannon QNS logs to debug
PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS=DEBUG
PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS-ims=DEBUG
PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS-emergency=DEBUG
PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS-mms=DEBUG
PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS-xcap=DEBUG
PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS-HC=DEBUG
# Modem userdebug
include device/google/gs101/modem/userdebug.mk
endif
include device/google/gs101/modem/user.mk
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
# b/36703476: Set default log size to 1M
PRODUCT_PROPERTY_OVERRIDES += \
ro.logd.size=1M
# b/114766334: persist all logs by default rotating on 30 files of 1MiB
PRODUCT_PROPERTY_OVERRIDES += \
logd.logpersistd=logcatd \
logd.logpersistd.size=30
endif
# From system.property
PRODUCT_PROPERTY_OVERRIDES += \
ro.telephony.default_network=27 \
persist.vendor.ril.db_ecc.use.iccid_to_plmn=1 \
persist.vendor.ril.db_ecc.id.type=5
#rild.libpath=/system/lib64/libsec-ril.so \
#rild.libargs=-d /dev/umts_ipc0
# SIT-RIL Logging setting
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.ril.log_mask=3 \
persist.vendor.ril.log.base_dir=/data/vendor/radio/sit-ril \
persist.vendor.ril.log.chunk_size=5242880 \
persist.vendor.ril.log.num_file=3
# Enable reboot free DSDS
PRODUCT_PRODUCT_PROPERTIES += \
persist.radio.reboot_on_modem_change=false
# Enable Early Camping
PRODUCT_PRODUCT_PROPERTIES += \
persist.vendor.ril.camp_on_earlier=1
# Carrier configuration default location
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.radio.config.carrier_config_dir=/vendor/firmware/carrierconfig
# Set the Bluetooth Class of Device
# Service Field: 0x5A -> 90
# Bit 17: Networking
# Bit 19: Capturing
# Bit 20: Object Transfer
# Bit 22: Telephony
# MAJOR_CLASS: 0x02 -> 2 (Phone)
# MINOR_CLASS: 0x0C -> 12 (Smart Phone)
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.device.class_of_device=90,2,12
# Set supported Bluetooth profiles to enabled
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.profile.asha.central.enabled?=true \
bluetooth.profile.a2dp.source.enabled?=true \
bluetooth.profile.avrcp.target.enabled?=true \
bluetooth.profile.bas.client.enabled?=true \
bluetooth.profile.gatt.enabled?=true \
bluetooth.profile.hfp.ag.enabled?=true \
bluetooth.profile.hid.device.enabled?=true \
bluetooth.profile.hid.host.enabled?=true \
bluetooth.profile.map.server.enabled?=true \
bluetooth.profile.opp.enabled?=true \
bluetooth.profile.pan.nap.enabled?=true \
bluetooth.profile.pan.panu.enabled?=true \
bluetooth.profile.pbap.server.enabled?=true \
bluetooth.profile.sap.server.enabled?=true \
PRODUCT_PROPERTY_OVERRIDES += \
telephony.active_modems.max_count=2
USE_LASSEN_OEMHOOK := true
# The "power-anomaly-sitril" is added into PRODUCT_SOONG_NAMESPACES when
# $(USE_LASSEN_OEMHOOK) is true and $(BOARD_WITHOUT_RADIO) is not true.
ifneq ($(BOARD_WITHOUT_RADIO),true)
PRODUCT_SOONG_NAMESPACES += vendor/google/tools/power-anomaly-sitril
endif
# Use for GRIL
USES_LASSEN_MODEM := true
ifeq ($(USES_GOOGLE_DIALER_CARRIER_SETTINGS),true)
USE_GOOGLE_DIALER := true
USE_GOOGLE_CARRIER_SETTINGS := true
endif
# Audio client implementation for RIL
USES_GAUDIO := true
# ######################
# GRAPHICS - GPU (begin)
# Must match BOARD_USES_SWIFTSHADER in BoardConfig.mk
USE_SWIFTSHADER := false
# HWUI
TARGET_USES_VULKAN = true
PRODUCT_SOONG_NAMESPACES += \
vendor/arm/mali/valhall
$(call soong_config_set,pixel_mali,soc,$(TARGET_BOARD_PLATFORM))
include device/google/gs-common/gpu/gpu.mk
PRODUCT_PACKAGES += \
libGLES_mali \
vulkan.mali \
libOpenCL \
libgpudataproducer
PRODUCT_VENDOR_PROPERTIES += \
ro.hardware.vulkan=mali
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
debug.mali.disable_backend_affinity=true
# Mali Configuration Properties
PRODUCT_VENDOR_PROPERTIES += \
vendor.mali.platform.config=/vendor/etc/mali/platform.config \
vendor.mali.debug.config=/vendor/etc/mali/debug.config \
vendor.mali.base_protected_max_core_count=3 \
vendor.mali.base_protected_tls_max=67108864 \
vendor.mali.platform_agt_frequency_khz=24576
ifeq ($(USE_SWIFTSHADER),true)
PRODUCT_PACKAGES += \
libGLESv1_CM_swiftshader \
libEGL_swiftshader \
libGLESv2_swiftshader
endif
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.opengles.aep.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.opengles.aep.xml \
frameworks/native/data/etc/android.hardware.vulkan.version-1_3.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.version.xml \
frameworks/native/data/etc/android.hardware.vulkan.level-1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.level.xml \
frameworks/native/data/etc/android.hardware.vulkan.compute-0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.compute.xml \
frameworks/native/data/etc/android.software.vulkan.deqp.level-2023-03-01.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.vulkan.deqp.level.xml \
frameworks/native/data/etc/android.software.opengles.deqp.level-2023-03-01.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.opengles.deqp.level.xml
ifeq ($(USE_SWIFTSHADER),true)
PRODUCT_VENDOR_PROPERTIES += \
ro.hardware.egl = swiftshader
else
PRODUCT_VENDOR_PROPERTIES += \
ro.hardware.egl = mali
endif
# Configure EGL blobcache
PRODUCT_VENDOR_PROPERTIES += \
ro.egl.blobcache.multifile=true \
ro.egl.blobcache.multifile_limit=33554432 \
PRODUCT_VENDOR_PROPERTIES += \
ro.opengles.version=196610 \
graphics.gpu.profiler.support=true
# b/295257834 Add HDR shaders to SurfaceFlinger's pre-warming cache
PRODUCT_VENDOR_PROPERTIES += ro.surface_flinger.prime_shader_cache.ultrahdr=1
# GRAPHICS - GPU (end)
# ####################
# Device Manifest, Device Compatibility Matrix for Treble
DEVICE_MANIFEST_FILE := \
device/google/gs101/manifest$(LOCAL_64ONLY).xml
ifneq (,$(filter aosp_%,$(TARGET_PRODUCT)))
DEVICE_MANIFEST_FILE += \
device/google/gs101/manifest_media_aosp.xml
PRODUCT_COPY_FILES += \
device/google/gs101/media_codecs_aosp_c2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_c2.xml
else
DEVICE_MANIFEST_FILE += \
device/google/gs101/manifest_media.xml
PRODUCT_COPY_FILES += \
device/google/gs101/media_codecs_bo_c2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_c2.xml \
device/google/gs101/media_codecs_aosp_c2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_aosp_c2.xml
endif
DEVICE_MATRIX_FILE := \
device/google/gs101/compatibility_matrix.xml
DEVICE_PACKAGE_OVERLAYS += device/google/gs101/overlay
# Enforce the Product interface
PRODUCT_PRODUCT_VNDK_VERSION := current
PRODUCT_ENFORCE_PRODUCT_PARTITION_INTERFACE := true
# Init files
PRODUCT_COPY_FILES += \
$(LOCAL_KERNEL):kernel \
device/google/gs101/conf/init.gs101.usb.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.gs101.usb.rc \
device/google/gs101/conf/ueventd.gs101.rc:$(TARGET_COPY_OUT_VENDOR)/etc/ueventd.rc
PRODUCT_COPY_FILES += \
device/google/gs101/conf/init.gs101.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.gs101.rc
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_COPY_FILES += \
device/google/gs101/conf/init.debug.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.debug.rc
endif
# Recovery files
PRODUCT_COPY_FILES += \
device/google/gs101/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.gs101.rc
ifneq ($(BOARD_WITHOUT_RADIO),true)
PRODUCT_SOONG_NAMESPACES += device/google/gs101/conf
else
PRODUCT_SOONG_NAMESPACES += device/google/gs101/conf/nomodem
endif
# Fstab files
PRODUCT_PACKAGES += \
fstab.gs101 \
fstab.gs101.vendor_ramdisk \
fstab.gs101-fips \
fstab.gs101-fips.vendor_ramdisk
PRODUCT_COPY_FILES += \
device/google/gs101/conf/fstab.persist:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.persist
# Shell scripts
PRODUCT_COPY_FILES += \
device/google/gs101/init.display.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.display.sh \
device/google/gs101/disable_contaminant_detection.sh:$(TARGET_COPY_OUT_VENDOR)/bin/hw/disable_contaminant_detection.sh
include device/google/gs-common/insmod/insmod.mk
# For creating dtbo image
PRODUCT_HOST_PACKAGES += \
mkdtimg
PRODUCT_PACKAGES += \
messaging
# CHRE
## tools
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += \
chre_power_test_client \
chre_test_client \
chre_aidl_hal_client
endif
## HAL
include device/google/gs-common/chre/hal.mk
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.context_hub.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.context_hub.xml
PRODUCT_PACKAGES += \
preloaded_nanoapps.json
# Filesystem management tools
PRODUCT_PACKAGES += \
linker.vendor_ramdisk \
tune2fs.vendor_ramdisk \
resize2fs.vendor_ramdisk
# Userdata Checkpointing OTA GC
PRODUCT_PACKAGES += \
checkpoint_gc
# Vendor verbose logging default property
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.verbose_logging_enabled=true
else
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.verbose_logging_enabled=false
endif
# CP Logging properties
PRODUCT_PROPERTY_OVERRIDES += \
ro.vendor.sys.modem.logging.loc = /data/vendor/slog \
persist.vendor.sys.silentlog.tcp = "On" \
ro.vendor.cbd.modem_removable = "1" \
ro.vendor.cbd.modem_type = "s5100sit" \
persist.vendor.sys.modem.logging.br_num=5 \
persist.vendor.sys.modem.logging.enable=true
# Enable silent CP crash handling
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.ril.crash_handling_mode=1
else
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.ril.crash_handling_mode=2
endif
# Add support dual SIM mode
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.radio.multisim_switch_support=true
# RPMB TA
PRODUCT_PACKAGES += \
tlrpmb
# Touch firmware
#PRODUCT_COPY_FILES += \
device/google/gs101/firmware/touch/s6sy761.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/s6sy761.fw
# Touch
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml
# Sensors
ifneq (,$(findstring tangor, $(TARGET_PRODUCT)))
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.sensor.accelerometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.accelerometer.xml \
frameworks/native/data/etc/android.hardware.sensor.compass.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.compass.xml \
frameworks/native/data/etc/android.hardware.sensor.dynamic.head_tracker.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.dynamic.head_tracker.xml \
frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.gyroscope.xml \
frameworks/native/data/etc/android.hardware.sensor.light.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.light.xml\
frameworks/native/data/etc/android.hardware.sensor.stepcounter.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepcounter.xml \
frameworks/native/data/etc/android.hardware.sensor.stepdetector.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepdetector.xml
else
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.sensor.accelerometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.accelerometer.xml \
frameworks/native/data/etc/android.hardware.sensor.barometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.barometer.xml \
frameworks/native/data/etc/android.hardware.sensor.compass.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.compass.xml \
frameworks/native/data/etc/android.hardware.sensor.dynamic.head_tracker.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.dynamic.head_tracker.xml \
frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.gyroscope.xml \
frameworks/native/data/etc/android.hardware.sensor.hifi_sensors.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.hifi_sensors.xml \
frameworks/native/data/etc/android.hardware.sensor.light.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.light.xml\
frameworks/native/data/etc/android.hardware.sensor.proximity.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.proximity.xml \
frameworks/native/data/etc/android.hardware.sensor.stepcounter.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepcounter.xml \
frameworks/native/data/etc/android.hardware.sensor.stepdetector.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepdetector.xml
endif
# Add sensor HAL AIDL product packages
PRODUCT_PACKAGES += android.hardware.sensors-service.multihal
# USB HAL
PRODUCT_PACKAGES += \
android.hardware.usb-service.gs101
PRODUCT_PACKAGES += \
android.hardware.usb.gadget-service.gs101
# MIDI feature
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.software.midi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.midi.xml
# default usb debug functions
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.usb.usbradio.config=dm
endif
# Power HAL
PRODUCT_COPY_FILES += \
device/google/gs101/task_profiles.json:$(TARGET_COPY_OUT_VENDOR)/etc/task_profiles.json
# Legacy HW
PRODUCT_COPY_FILES += \
device/google/gs101/powerhint_a0.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint_a0.json
PRODUCT_COPY_FILES += \
device/google/gs101/powerhint_a1.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint_a1.json
-include hardware/google/pixel/power-libperfmgr/aidl/device.mk
# IRQ rebalancing.
include hardware/google/pixel/rebalance_interrupts/rebalance_interrupts.mk
# PowerStats HAL
PRODUCT_PACKAGES += \
android.hardware.power.stats-service.pixel
#
# Audio HALs
#
# Audio Configurations
USE_LEGACY_LOCAL_AUDIO_HAL := false
USE_XML_AUDIO_POLICY_CONF := 1
# Enable AAudio MMAP/NOIRQ data path.
PRODUCT_PROPERTY_OVERRIDES += aaudio.mmap_policy=2
PRODUCT_PROPERTY_OVERRIDES += aaudio.mmap_exclusive_policy=2
PRODUCT_PROPERTY_OVERRIDES += aaudio.hw_burst_min_usec=2000
# Calliope firmware overwrite
#PRODUCT_COPY_FILES += \
device/google/gs101/firmware/calliope_dram.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/calliope_dram.bin \
device/google/gs101/firmware/calliope_sram.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/calliope_sram.bin \
device/google/gs101/firmware/calliope_dram_2.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/calliope_dram_2.bin \
device/google/gs101/firmware/calliope_sram_2.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/calliope_sram_2.bin \
device/google/gs101/firmware/calliope2.dt:$(TARGET_COPY_OUT_VENDOR)/firmware/calliope2.dt \
# Cannot reference variables defined in BoardConfig.mk, uncomment this if
# BOARD_USE_OFFLOAD_AUDIO and BOARD_USE_OFFLOAD_EFFECT are true
## AudioEffectHAL library
#PRODUCT_PACKAGES += \
# libexynospostprocbundle
# Cannot reference variables defined in BoardConfig.mk, uncomment this if
# BOARD_USE_SOUNDTRIGGER_HAL is true
#PRODUCT_PACKAGES += \
# sound_trigger.primary.maran9820
# A-Box Service Daemon
#PRODUCT_PACKAGES += main_abox
# Libs
PRODUCT_PACKAGES += \
com.android.future.usb.accessory
# for now include gralloc here. should come from hardware/google_devices/exynos5
PRODUCT_PACKAGES += \
android.hardware.memtrack-service.pixel \
libion_exynos \
libion
PRODUCT_PACKAGES += \
libhwjpeg
# Video Editor
PRODUCT_PACKAGES += \
VideoEditorGoogle
# WideVine modules
PRODUCT_PACKAGES += \
liboemcrypto
# Lyric Camera HAL settings
include device/google/gs-common/camera/lyric.mk
$(call soong_config_set,lyric,soc,gs101)
$(call soong_config_set,google3a_config,soc,gs101)
# WiFi
PRODUCT_PACKAGES += \
android.hardware.wifi-service \
wificond \
libwpa_client \
WifiOverlay \
# Connectivity
PRODUCT_PACKAGES += \
ConnectivityOverlay
PRODUCT_PACKAGES_DEBUG += \
f2fs_io \
check_f2fs \
f2fs.fibmap \
dump.f2fs
# Storage dump
include device/google/gs-common/storage/storage.mk
# Storage health HAL
PRODUCT_PACKAGES += \
android.hardware.health.storage-service.default
# storage pixelstats
-include hardware/google/pixel/pixelstats/device.mk
# Enable project quotas and casefolding for emulated storage without sdcardfs
$(call inherit-product, $(SRC_TARGET_DIR)/product/emulated_storage.mk)
$(call inherit-product, $(SRC_TARGET_DIR)/product/virtual_ab_ota/compression_with_xor.mk)
# Enable usage of io_uring in fastbootd
PRODUCT_VENDOR_PROPERTIES += sys.usb.ffs.io_uring_enabled=true
# Enforce generic ramdisk allow list
$(call inherit-product, $(SRC_TARGET_DIR)/product/generic_ramdisk.mk)
# Titan-M
ifeq (,$(filter true, $(BOARD_WITHOUT_DTLS)))
include device/google/gs-common/dauntless/gsc.mk
else
# include dauntless sepolicy to avoid compile error on devices without dauntless
BOARD_VENDOR_SEPOLICY_DIRS += device/google/gs-common/dauntless/sepolicy
endif
# Copy Camera HFD Setfiles
#PRODUCT_COPY_FILES += \
device/google/gs101/firmware/camera/libhfd/default_configuration.hfd.cfg.json:$(TARGET_COPY_OUT_VENDOR)/firmware/default_configuration.hfd.cfg.json \
device/google/gs101/firmware/camera/libhfd/pp_cfg.json:$(TARGET_COPY_OUT_VENDOR)/firmware/pp_cfg.json \
device/google/gs101/firmware/camera/libhfd/tracker_cfg.json:$(TARGET_COPY_OUT_VENDOR)/firmware/tracker_cfg.json \
device/google/gs101/firmware/camera/libhfd/WithLightFixNoBN.SDNNmodel:$(TARGET_COPY_OUT_VENDOR)/firmware/WithLightFixNoBN.SDNNmodel
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.wifi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.xml \
frameworks/native/data/etc/android.hardware.wifi.direct.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.direct.xml \
frameworks/native/data/etc/android.hardware.wifi.aware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.aware.xml \
frameworks/native/data/etc/android.hardware.wifi.passpoint.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.passpoint.xml \
frameworks/native/data/etc/android.hardware.wifi.rtt.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.rtt.xml \
frameworks/native/data/etc/android.hardware.usb.host.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.host.xml \
frameworks/native/data/etc/android.hardware.usb.accessory.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.accessory.xml
# (See b/211840489)
ifneq ($(DISABLE_CAMERA_FS_AF),true)
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.flash-autofocus.xml
else
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.camera.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.xml
endif
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.camera.front.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.front.xml \
frameworks/native/data/etc/android.hardware.camera.concurrent.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.concurrent.xml \
frameworks/native/data/etc/android.hardware.camera.full.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.full.xml\
frameworks/native/data/etc/android.hardware.camera.raw.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.raw.xml\
#PRODUCT_COPY_FILES += \
frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml \
frameworks/native/data/etc/android.hardware.wifi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.xml \
frameworks/native/data/etc/android.hardware.wifi.direct.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.direct.xml \
frameworks/native/data/etc/android.hardware.wifi.passpoint.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.passpoint.xml \
frameworks/native/data/etc/android.hardware.usb.host.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.host.xml \
frameworks/native/data/etc/android.hardware.usb.accessory.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.accessory.xml \
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.audio.low_latency.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.low_latency.xml \
frameworks/native/data/etc/android.hardware.audio.pro.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.pro.xml \
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.software.ipsec_tunnels.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.ipsec_tunnels.xml \
PRODUCT_PROPERTY_OVERRIDES += \
debug.slsi_platform=1 \
debug.hwc.winupdate=1
# hw composer HAL
$(call soong_config_set,google_displaycolor,displaycolor_platform,gs101)
PRODUCT_PACKAGES += \
libdisplaycolor \
hwcomposer.$(TARGET_BOARD_PLATFORM)
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += displaycolor_service
endif
PRODUCT_PROPERTY_OVERRIDES += \
debug.sf.disable_backpressure=0 \
debug.sf.enable_gl_backpressure=1
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.use_phase_offsets_as_durations=1
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.late.sf.duration=10500000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.late.app.duration=16600000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.early.sf.duration=16600000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.early.app.duration=16600000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.earlyGl.sf.duration=16600000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.earlyGl.app.duration=16600000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.frame_rate_multiple_threshold=120
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.layer_caching_active_layer_timeout_ms=1000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.treat_170m_as_sRGB=1
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.enable_layer_caching=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.set_idle_timer_ms?=80
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.set_touch_timer_ms=200
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.set_display_power_timer_ms=1000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.use_content_detection_for_refresh_rate=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.max_frame_buffer_acquired_buffers=3
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.supports_background_blur=1
PRODUCT_SYSTEM_PROPERTIES += ro.launcher.blur.appLaunch=0
# Must align with HAL types Dataspace
# The data space of wide color gamut composition preference is Dataspace::DISPLAY_P3
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.wcg_composition_dataspace=143261696
# Display
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.has_wide_color_display=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.has_HDR_display=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.use_color_management=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.protected_contents=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.display_update_imminent_timeout_ms=50
PRODUCT_PROPERTY_OVERRIDES += \
persist.sys.sf.native_mode=2
PRODUCT_COPY_FILES += \
device/google/gs101/display/display_colordata_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_cal0.pb
# limit DPP downscale ratio
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.hwc.dpp.downscale=2
# Cannot reference variables defined in BoardConfig.mk, uncomment this if
# BOARD_USES_EXYNOS_DSS_FEATURE is true
## set the dss enable status setup
#PRODUCT_PROPERTY_OVERRIDES += \
# ro.exynos.dss=1
# Cannot reference variables defined in BoardConfig.mk, uncomment this if
# BOARD_USES_EXYNOS_AFBC_FEATURE is true
# set the dss enable status setup
PRODUCT_PROPERTY_OVERRIDES += \
ro.vendor.ddk.set.afbc=1
PRODUCT_CHARACTERISTICS := nosdcard
# WPA SUPPLICANT
PRODUCT_COPY_FILES += \
device/google/gs101/wifi/p2p_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant_overlay.conf \
device/google/gs101/wifi/wpa_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant_overlay.conf
# WIFI COEX
PRODUCT_COPY_FILES += \
device/google/gs101/wifi/coex_table.xml:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/coex_table.xml
PRODUCT_PACKAGES += hostapd
PRODUCT_PACKAGES += wpa_supplicant
PRODUCT_PACKAGES += wpa_supplicant.conf
WIFI_PRIV_CMD_UPDATE_MBO_CELL_STATUS := enabled
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += wpa_cli
PRODUCT_PACKAGES += hostapd_cli
endif
####################################
## VIDEO
####################################
$(call soong_config_set,bigo,soc,gs101)
# 1. Codec 2.0
# for settings used by different C2 hal
include device/google/gs-common/mediacodec/common/mediacodec_common.mk
# for Exynos C2 Hal
include device/google/gs-common/mediacodec/samsung/mediacodec_samsung.mk
PRODUCT_COPY_FILES += \
device/google/gs101/media_codecs_performance_c2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_performance_c2.xml \
PRODUCT_PROPERTY_OVERRIDES += \
debug.stagefright.c2-poolmask=458752 \
debug.c2.use_dmabufheaps=1 \
media.c2.dmabuf.padding=512 \
debug.stagefright.ccodec_delayed_params=1 \
ro.vendor.gpu.dataspace=1
# Create input surface on the framework side
PRODUCT_PROPERTY_OVERRIDES += \
debug.stagefright.c2inputsurface=-1 \
PRODUCT_PROPERTY_OVERRIDES += media.c2.hal.selection=aidl
# 2. OpenMAX IL
PRODUCT_COPY_FILES += \
device/google/gs101/media_codecs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs.xml \
device/google/gs101/media_codecs_performance.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_performance.xml
####################################
# Telephony
#PRODUCT_COPY_FILES += \
frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_telephony.xml
# CBD (CP booting deamon)
CBD_USE_V2 := true
CBD_PROTOCOL_SIT := true
# setup dalvik vm configs.
$(call inherit-product, frameworks/native/build/phone-xhdpi-6144-dalvik-heap.mk)
PRODUCT_TAGS += dalvik.gc.type-precise
# Exynos OpenVX framework
PRODUCT_PACKAGES += \
libexynosvision
ifeq ($(TARGET_USES_CL_KERNEL),true)
PRODUCT_PACKAGES += \
libopenvx-opencl
endif
# Location
ifeq (,$(filter tangor citron,$(subst _, ,$(TARGET_PRODUCT))))
include device/google/gs-common/gps/brcm/device.mk
PRODUCT_COPY_FILES += \
device/google/gs101/location/gps.cer:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.cer
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_COPY_FILES += \
device/google/gs101/location/lhd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
device/google/gs101/location/scd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
else
PRODUCT_COPY_FILES += \
device/google/gs101/location/lhd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
device/google/gs101/location/scd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
endif
endif
# Trusty (KM, GK, Storage)
$(call inherit-product, system/core/trusty/trusty-storage.mk)
$(call inherit-product, system/core/trusty/trusty-base.mk)
# Trusty dump
include device/google/gs-common/trusty/trusty.mk
# Trusty unit test tool
PRODUCT_PACKAGES_DEBUG += \
trusty-ut-ctrl \
tipc-test
include device/google/gs101/confirmationui/confirmationui.mk
include device/google/gs101/trusty_metricsd/trusty_metricsd.mk
PRODUCT_PACKAGES += \
android.hardware.graphics.composer@2.4-impl \
android.hardware.graphics.composer@2.4-service
# Storage: for factory reset protection feature
PRODUCT_PROPERTY_OVERRIDES += \
ro.frp.pst=/dev/block/by-name/frp
# System props to enable Bluetooth Quality Report (BQR) feature
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.bqr.event_mask=262174 \
persist.bluetooth.bqr.min_interval_ms=500
else
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.bqr.event_mask=30 \
persist.bluetooth.bqr.min_interval_ms=500
endif
# Enable Bluetooth AutoOn feature
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.server.automatic_turn_on=false
#VNDK
PRODUCT_PACKAGES += \
vndk-libs
PRODUCT_ENFORCE_RRO_TARGETS := \
framework-res
# Dynamic Partitions
PRODUCT_USE_DYNAMIC_PARTITIONS := true
# Use FUSE passthrough
PRODUCT_PRODUCT_PROPERTIES += \
persist.sys.fuse.passthrough.enable=true
# Use /product/etc/fstab.postinstall to mount system_other
PRODUCT_PRODUCT_PROPERTIES += \
ro.postinstall.fstab.prefix=/product
PRODUCT_COPY_FILES += \
device/google/gs101/conf/fstab.postinstall:$(TARGET_COPY_OUT_PRODUCT)/etc/fstab.postinstall
# fastbootd
PRODUCT_PACKAGES += \
android.hardware.fastboot@1.1-impl.pixel \
fastbootd
#google iwlan
PRODUCT_PACKAGES += \
Iwlan
#Iwlan test app for userdebug/eng builds
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += \
IwlanTestApp
endif
PRODUCT_PACKAGES += \
whitelist \
libstagefright_hdcp \
libskia_opt
#PRODUCT_PACKAGES += \
mfc_fw.bin \
calliope_sram.bin \
calliope_dram.bin \
calliope_iva.bin \
vts.bin
ifneq ($(BOARD_WITHOUT_RADIO),true)
# This will be called only if IMSService is building with source code for dev branches.
$(call inherit-product-if-exists, vendor/samsung_slsi/telephony/$(BOARD_USES_SHARED_VENDOR_TELEPHONY)/shannon-ims/device-vendor.mk)
PRODUCT_PACKAGES += ShannonIms
$(call inherit-product-if-exists, vendor/samsung_slsi/telephony/$(BOARD_USES_SHARED_VENDOR_TELEPHONY)/shannon-iwlan/device-vendor.mk)
PRODUCT_PACKAGES_DEBUG += \
preinstalled-packages-product-gs101-device-debug.xml
PRODUCT_PACKAGES += ShannonRcs
endif
# Exynos RIL and telephony
# Multi SIM(DSDS)
SIM_COUNT := 2
SUPPORT_MULTI_SIM := true
# Support NR
SUPPORT_NR := true
# Using IRadio 1.6
USE_RADIO_HAL_1_6 := true
# Support SecureElement HAL for HIDL
USE_SE_HIDL := true
#$(call inherit-product, vendor/google_devices/telephony/common/device-vendor.mk)
#$(call inherit-product, vendor/google_devices/gs101/proprietary/device-vendor.mk)
ifneq ($(BOARD_WITHOUT_RADIO),true)
$(call inherit-product-if-exists, vendor/samsung_slsi/telephony/$(BOARD_USES_SHARED_VENDOR_TELEPHONY)/common/device-vendor.mk)
endif
ifeq ($(DEVICE_IS_64BIT_ONLY),true)
$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit_only.mk)
else
$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
endif
#$(call inherit-product, hardware/google_devices/exynos5/exynos5.mk)
#$(call inherit-product-if-exists, hardware/google_devices/gs101/gs101.mk)
#$(call inherit-product-if-exists, vendor/google_devices/common/exynos-vendor.mk)
#$(call inherit-product-if-exists, hardware/broadcom/wlan/bcmdhd/firmware/bcm4375/device-bcm.mk)
include device/google/gs-common/sensors/sensors.mk
$(call soong_config_set,usf,target_soc,gs101)
PRODUCT_COPY_FILES += \
device/google/gs101/default-permissions.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/default-permissions/default-permissions.xml \
device/google/gs101/component-overrides.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sysconfig/component-overrides.xml
# modem_svc_sit daemon
PRODUCT_PACKAGES += modem_svc_sit
# modem logging binary/configs
PRODUCT_PACKAGES += modem_logging_control
# modem logging configs
PRODUCT_COPY_FILES += \
device/google/gs101/radio/config/logging.conf:$(TARGET_COPY_OUT_VENDOR)/etc/modem/logging.conf \
device/google/gs101/radio/config/default.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/modem/default.cfg \
device/google/gs101/radio/config/default.nprf:$(TARGET_COPY_OUT_VENDOR)/etc/modem/default.nprf \
device/google/gs101/radio/config/default_metrics.xml:$(TARGET_COPY_OUT_VENDOR)/etc/modem/default_metrics.xml \
device/google/gs101/radio/config/teamfood_default.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/modem/teamfood_default.cfg \
device/google/gs101/radio/config/teamfood_default.nprf:$(TARGET_COPY_OUT_VENDOR)/etc/modem/teamfood_default.nprf \
device/google/gs101/radio/config/teamfood_default_metrics.xml:$(TARGET_COPY_OUT_VENDOR)/etc/modem/teamfood_default_metrics.xml \
device/google/gs101/radio/config/default_stability.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/modem/default_stability.cfg \
device/google/gs101/radio/config/default_stability.nprf:$(TARGET_COPY_OUT_VENDOR)/etc/modem/default_stability.nprf \
device/google/gs101/radio/config/default_NAS_RRC.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/modem/default_NAS_RRC.cfg \
device/google/gs101/radio/config/default_NAS_RRC.nprf:$(TARGET_COPY_OUT_VENDOR)/etc/modem/default_NAS_RRC.nprf \
device/google/gs101/radio/config/default_network.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/modem/default_network.cfg \
device/google/gs101/radio/config/default_network.nprf:$(TARGET_COPY_OUT_VENDOR)/etc/modem/default_network.nprf \
device/google/gs101/radio/config/Pixel_Default.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/modem/Pixel_Default.cfg \
device/google/gs101/radio/config/Pixel_Default.nprf:$(TARGET_COPY_OUT_VENDOR)/etc/modem/Pixel_Default.nprf \
device/google/gs101/radio/config/Pixel_Default_metrics.xml:$(TARGET_COPY_OUT_VENDOR)/etc/modem/Pixel_Default_metrics.xml \
device/google/gs101/radio/config/Pixel_stability.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/modem/Pixel_stability.cfg \
device/google/gs101/radio/config/Pixel_stability.nprf:$(TARGET_COPY_OUT_VENDOR)/etc/modem/Pixel_stability.nprf
PRODUCT_COPY_FILES += \
device/google/gs101/radio/gnss_blanking.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/gnss_blanking.csv
# Vibrator Diag
PRODUCT_PACKAGES_DEBUG += \
diag-vibrator \
diag-vibrator-cs40l25a \
diag-vibrator-drv2624 \
$(NULL)
PRODUCT_PACKAGES += \
android.hardware.health-service.gs101 \
android.hardware.health-service.gs101_recovery \
# Audio
# Audio HAL Server & Default Implementations
include device/google/gs-common/audio/hidl_gs101.mk
## AoC soong
PRODUCT_SOONG_NAMESPACES += \
vendor/google/whitechapel/aoc
$(call soong_config_set,aoc,target_soc,$(TARGET_BOARD_PLATFORM))
$(call soong_config_set,aoc,target_product,$(TARGET_PRODUCT))
$(call soong_config_set,android_hardware_audio,run_64bit,true)
# Audio properties
PRODUCT_PROPERTY_OVERRIDES += \
ro.config.vc_call_vol_steps=7 \
ro.config.media_vol_steps=25 \
ro.audio.monitorRotation = true \
ro.audio.offload_wakelock=false
# declare use of spatial audio
# PRODUCT_PROPERTY_OVERRIDES += \
# ro.audio.spatializer_enabled=true
# vndservicemanager and vndservice no longer included in API 30+, however needed by vendor code.
# See b/148807371 for reference
PRODUCT_PACKAGES += vndservicemanager
PRODUCT_PACKAGES += vndservice
# TinyTools, debug tool and cs35l41 speaker calibration tool for Audio
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += \
tinyplay \
tinycap \
tinymix \
tinypcminfo \
tinyhostless \
cplay \
aoc_hal \
aoc_tuning_inft \
crus_sp_cal \
mahal_test \
ma_aoc_tuning_test
endif
PRODUCT_PACKAGES += \
google.hardware.media.c2@1.0-service \
libgc2_store \
libgc2_base \
libgc2_av1_dec \
libbo_av1 \
libgc2_cwl \
libgc2_utils
# Thermal HAL
PRODUCT_PROPERTY_OVERRIDES += persist.vendor.enable.thermal.genl=true
# EdgeTPU
include device/google/gs-common/edgetpu/edgetpu.mk
# Config variables for TPU chip on device.
$(call soong_config_set,edgetpu_config,chip,abrolhos)
# Include the edgetpu targets defined the namespaces below into the final image.
PRODUCT_SOONG_NAMESPACES += \
vendor/google_devices/gs101/proprietary/gchips/tpu/metrics \
vendor/google_devices/gs101/proprietary/gchips/tpu/tflite_delegate \
vendor/google_devices/gs101/proprietary/gchips/tpu/darwinn_logging_service \
vendor/google_devices/gs101/proprietary/gchips/tpu/nnapi_stable_aidl \
vendor/google_devices/gs101/proprietary/gchips/tpu/aidl \
vendor/google_devices/gs101/proprietary/gchips/tpu/hal \
vendor/google_devices/gs101/proprietary/gchips/tpu/tachyon/api \
vendor/google_devices/gs101/proprietary/gchips/tpu/tachyon/service
# TPU firmware
PRODUCT_PACKAGES += edgetpu-abrolhos.fw
# Connectivity Thermal Power Manager
PRODUCT_PACKAGES += \
ConnectivityThermalPowerManager
# A/B support
PRODUCT_PACKAGES += \
otapreopt_script \
cppreopts.sh \
update_engine \
update_engine_sideload \
update_verifier
# pKVM
$(call inherit-product, packages/modules/Virtualization/apex/product_packages.mk)
PRODUCT_BUILD_PVMFW_IMAGE := true
ifeq ($(TARGET_PKVM_ENABLED),true)
PRODUCT_PACKAGES += pkvm_enabler
else
PRODUCT_COPY_FILES += \
device/google/gs101/pkvm/pkvm_experiment.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/pkvm_experiment.rc
endif
# Enable watchdog timeout loop breaker.
PRODUCT_PROPERTY_OVERRIDES += \
framework_watchdog.fatal_window.second=600 \
framework_watchdog.fatal_count=3
# Enable zygote critical window.
PRODUCT_PROPERTY_OVERRIDES += \
zygote.critical_window.minute=10
# Suspend properties
# (b/171433995): Enable short suspend backoffs and reduce max backoff time
PRODUCT_PROPERTY_OVERRIDES += \
suspend.short_suspend_threshold_millis=2000 \
suspend.short_suspend_backoff_enabled=true \
suspend.max_sleep_time_millis=40000
# Enable Incremental on the device
PRODUCT_PROPERTY_OVERRIDES += \
ro.incremental.enable=true
# Project
include hardware/google/pixel/common/pixel-common-device.mk
# Pixel Logger
include hardware/google/pixel/PixelLogger/PixelLogger.mk
ifneq ($(BOARD_WITHOUT_RADIO),true)
# Telephony
include device/google/gs101/telephony/user.mk
endif
# Wifi ext
include hardware/google/pixel/wifi_ext/device.mk
# Battery Stats Viewer
PRODUCT_PACKAGES_DEBUG += BatteryStatsViewer
# Install product specific framework compatibility matrix
# (TODO: b/169535506) This includes the FCM for system_ext and product partition.
# It must be split into the FCM of each partition.
DEVICE_PRODUCT_COMPATIBILITY_MATRIX_FILE += device/google/gs101/device_framework_matrix_product.xml
# Preopt SystemUI
PRODUCT_DEXPREOPT_SPEED_APPS += SystemUIGoogle # For internal
PRODUCT_DEXPREOPT_SPEED_APPS += SystemUI # For AOSP
# Compile SystemUI on device with `speed`.
PRODUCT_PROPERTY_OVERRIDES += \
dalvik.vm.systemuicompilerfilter=speed
# Keymaster configuration
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.software.device_id_attestation.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.device_id_attestation.xml \
frameworks/native/data/etc/android.hardware.device_unique_attestation.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.device_unique_attestation.xml
# Use 64-bit dex2oat for better dexopt time.
PRODUCT_PROPERTY_OVERRIDES += \
dalvik.vm.dex2oat64.enabled=true
# Call deleteAllKeys if vold detects a factory reset
PRODUCT_VENDOR_PROPERTIES += ro.crypto.metadata_init_delete_all_keys.enabled=true
# Hardware Info Collection
include hardware/google/pixel/HardwareInfo/HardwareInfo.mk
# Touch service
include device/google/gs-common/touch/twoshay/aidl_gs101.mk
include device/google/gs-common/touch/twoshay/twoshay.mk
# Allow longer timeout for incident report generation in bugreport
# Overriding in /product partition instead of /vendor intentionally,
# since it can't be overridden from /vendor.
PRODUCT_PRODUCT_PROPERTIES += \
dumpstate.strict_run=false
Reference in a new issue View git blame Copy permalink