Evolution-X-Tensor/device_google_gs101
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
device_google_gs101/BoardConfig-common.mk
Vince Leung 58180f0c16 gs101: add haptics actuator model config 
Actuator models can vary across devices. Actuator models can have
different characteristics that need to be handled appropriately. Add
support to define the actuator model used in Soong makefiles.

Bug: 195894512
Test: verified that different actuator model configs are used on
different targets

Change-Id: Ic7fd5f52c3bfed252fa3956f3e926c90c1632013
2021-09-03 23:44:04 +00:00

416 lines
13 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2019 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
include build/make/target/board/BoardConfigMainlineCommon.mk
include build/make/target/board/BoardConfigPixelCommon.mk
# Should be uncommented after fixing vndk-sp violation is fixed.
PRODUCT_FULL_TREBLE_OVERRIDE := true
# This prop, when set to 1, will prevent OTA tooling from generating a VABC OTA,
# even if device actually supports it.
# Remove this once P21 decides to use VABC OTA
BOARD_DONT_USE_VABC_OTA := true
# HACK : To fix up after bring up multimedia devices.
TARGET_SOC := gs101
TARGET_SOC_NAME := google
USES_DEVICE_GOOGLE_GS101 := true
TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-2a
TARGET_CPU_ABI := arm64-v8a
TARGET_CPU_VARIANT := cortex-a55
TARGET_CPU_VARIANT_RUNTIME := cortex-a55
ifeq (,$(filter %_64,$(TARGET_PRODUCT)))
TARGET_2ND_ARCH := arm
TARGET_2ND_ARCH_VARIANT := armv8-a
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi
TARGET_2ND_CPU_VARIANT := generic
TARGET_2ND_CPU_VARIANT_RUNTIME := cortex-a53
endif
BOARD_KERNEL_CMDLINE += dyndbg=\"func alloc_contig_dump_pages +p\"
BOARD_KERNEL_CMDLINE += earlycon=exynos4210,0x10A00000 console=ttySAC0,115200 androidboot.console=ttySAC0 printk.devkmsg=on
BOARD_KERNEL_CMDLINE += cma_sysfs.experimental=Y
BOARD_KERNEL_CMDLINE += stack_depot_disable=off page_pinner=on
BOARD_BOOTCONFIG += androidboot.boot_devices=14700000.ufs
TARGET_NO_BOOTLOADER := true
TARGET_NO_KERNEL := false
TARGET_NO_RADIOIMAGE := true
BOARD_USES_GENERIC_KERNEL_IMAGE := true
BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT := true
BOARD_MOVE_GSI_AVB_KEYS_TO_VENDOR_BOOT := true
TARGET_RECOVERY_WIPE := device/google/gs101/conf/recovery.wipe
# This is the fstab file that will be included in the recovery image. Note that
# recovery doesn't care about the encryption settings, so it doesn't matter
# whether we use the normal or the fips fstab here.
#
# Since this is a generated file, it's necessary to use intermediates-dir-for in
# order to refer to it correctly. And since intermediates-dir-for isn't defined
# yet when this file is included, it's necessary to use a deferred variable
# assignment ( = ) rather than an immediate variable assignment ( := ).
TARGET_RECOVERY_FSTAB = $(call intermediates-dir-for,ETC,fstab.gs101)/fstab.gs101
TARGET_RECOVERY_PIXEL_FORMAT := ABGR_8888
TARGET_RECOVERY_UI_MARGIN_HEIGHT := 165
TARGET_RECOVERY_UI_LIB := \
librecovery_ui_pixel \
libfstab
AB_OTA_UPDATER := true
AB_OTA_PARTITIONS += \
system \
system_ext \
product \
vbmeta_system
ifneq ($(PRODUCT_BUILD_BOOT_IMAGE),false)
AB_OTA_PARTITIONS += boot
endif
ifneq ($(PRODUCT_BUILD_VENDOR_BOOT_IMAGE),false)
AB_OTA_PARTITIONS += vendor_boot
AB_OTA_PARTITIONS += dtbo
endif
ifneq ($(PRODUCT_BUILD_VBMETA_IMAGE),false)
AB_OTA_PARTITIONS += vbmeta
endif
# EMULATOR common modules
BOARD_EMULATOR_COMMON_MODULES := liblight
OVERRIDE_RS_DRIVER := libRSDriverArm.so
BOARD_EGL_CFG := device/google/gs101/conf/egl.cfg
#BOARD_USES_HGL := true
USE_OPENGL_RENDERER := true
NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
BOARD_USES_EXYNOS5_COMMON_GRALLOC := true
BOARD_USES_ALIGN_RESTRICTION := false
BOARD_USES_GRALLOC_ION_SYNC := true
# This should be the same value as USE_SWIFTSHADER in device.mk
BOARD_USES_SWIFTSHADER := false
# Gralloc4
SOONG_CONFIG_NAMESPACES += arm_gralloc
SOONG_CONFIG_arm_gralloc := \
gralloc_arm_no_external_afbc \
mali_gpu_support_afbc_basic \
mali_gpu_support_afbc_wideblk \
gralloc_init_afbc \
gralloc_ion_sync_on_lock \
dpu_support_1010102_afbc
ifeq ($(BOARD_USES_SWIFTSHADER),true)
SOONG_CONFIG_arm_gralloc_gralloc_arm_no_external_afbc := true
SOONG_CONFIG_arm_gralloc_mali_gpu_support_afbc_basic := false
SOONG_CONFIG_arm_gralloc_mali_gpu_support_afbc_wideblk := false
SOONG_CONFIG_arm_gralloc_gralloc_init_afbc := false
SOONG_CONFIG_arm_gralloc_dpu_support_1010102_afbc := false
else
SOONG_CONFIG_arm_gralloc_gralloc_arm_no_external_afbc := false
SOONG_CONFIG_arm_gralloc_mali_gpu_support_afbc_basic := true
SOONG_CONFIG_arm_gralloc_mali_gpu_support_afbc_wideblk := true
SOONG_CONFIG_arm_gralloc_gralloc_init_afbc := true
SOONG_CONFIG_arm_gralloc_dpu_support_1010102_afbc := true
endif # ifeq ($(BOARD_USES_SWIFTSHADER),true)
SOONG_CONFIG_arm_gralloc_gralloc_ion_sync_on_lock := $(BOARD_USES_GRALLOC_ION_SYNC)
# Graphics
#BOARD_USES_EXYNOS_DATASPACE_FEATURE := true
# Enable chain partition for system.
BOARD_AVB_VBMETA_SYSTEM := system system_ext product
BOARD_AVB_VBMETA_SYSTEM_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem
BOARD_AVB_VBMETA_SYSTEM_ALGORITHM := SHA256_RSA2048
BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX := $(PLATFORM_SECURITY_PATCH_TIMESTAMP)
BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX_LOCATION := 1
# Enable chained vbmeta for boot images
BOARD_AVB_BOOT_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem
BOARD_AVB_BOOT_ALGORITHM := SHA256_RSA2048
BOARD_AVB_BOOT_ROLLBACK_INDEX := $(PLATFORM_SECURITY_PATCH_TIMESTAMP)
BOARD_AVB_BOOT_ROLLBACK_INDEX_LOCATION := 2
TARGET_USERIMAGES_USE_EXT4 := true
TARGET_USERIMAGES_USE_F2FS := true
BOARD_USERDATAIMAGE_PARTITION_SIZE := 11796480000
BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE := f2fs
PRODUCT_FS_COMPRESSION := 1
BOARD_FLASH_BLOCK_SIZE := 4096
BOARD_MOUNT_SDCARD_RW := true
# product.img
BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE := ext4
TARGET_COPY_OUT_PRODUCT := product
# system_ext.img
BOARD_SYSTEM_EXTIMAGE_FILE_SYSTEM_TYPE := ext4
TARGET_COPY_OUT_SYSTEM_EXT := system_ext
########################
# Video Codec
########################
# 1. Exynos C2
BOARD_USE_CSC_FILTER := false
BOARD_USE_DEC_SW_CSC := true
BOARD_USE_ENC_SW_CSC := true
BOARD_SUPPORT_MFC_ENC_RGB := true
BOARD_USE_BLOB_ALLOCATOR := false
########################
BOARD_SUPER_PARTITION_SIZE := 8531214336
BOARD_SUPER_PARTITION_GROUPS := google_dynamic_partitions
# Set size to BOARD_SUPER_PARTITION_SIZE - overhead (4MiB) (b/182237294)
BOARD_GOOGLE_DYNAMIC_PARTITIONS_SIZE := 8527020032
BOARD_GOOGLE_DYNAMIC_PARTITIONS_PARTITION_LIST := \
system \
system_ext \
product \
vendor \
vendor_dlkm
# Set error limit to BOARD_SUPER_PARTITON_SIZE - 500MB
BOARD_SUPER_PARTITION_ERROR_LIMIT := 8006926336
#
# AUDIO & VOICE
#
BOARD_USES_GENERIC_AUDIO := true
SOONG_CONFIG_NAMESPACES += aoc_audio_func
SOONG_CONFIG_aoc_audio_func += \
ext_hidl
SOONG_CONFIG_aoc_audio_func_ext_hidl := true
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
SOONG_CONFIG_aoc_audio_func += \
dump_usecase_data \
hal_socket_control \
record_tunning_keys
SOONG_CONFIG_aoc_audio_func_dump_usecase_data := true
SOONG_CONFIG_aoc_audio_func_hal_socket_control := true
SOONG_CONFIG_aoc_audio_func_record_tunning_keys := true
endif
ifneq (,$(filter aosp_%,$(TARGET_PRODUCT)))
SOONG_CONFIG_aoc_audio_func += aosp_build
SOONG_CONFIG_aoc_audio_func_aosp_build := true
endif
SOONG_CONFIG_NAMESPACES += haptics
SOONG_CONFIG_haptics += \
actuator_model
SOONG_CONFIG_haptics_actuator_model := $(ACTUATOR_MODEL)
# Primary AudioHAL Configuration
#BOARD_USE_COMMON_AUDIOHAL := true
#BOARD_USE_CALLIOPE_AUDIOHAL := false
#BOARD_USE_AUDIOHAL := true
# Compress Offload Configuration
#BOARD_USE_OFFLOAD_AUDIO := true
#BOARD_USE_OFFLOAD_EFFECT := false
# SoundTriggerHAL Configuration
#BOARD_USE_SOUNDTRIGGER_HAL := false
# HWComposer
BOARD_HWC_VERSION := libhwc2.1
TARGET_RUNNING_WITHOUT_SYNC_FRAMEWORK := false
BOARD_HDMI_INCAPABLE := true
TARGET_USES_HWC2 := true
HWC_SKIP_VALIDATE := true
HWC_SUPPORT_RENDER_INTENT := true
HWC_SUPPORT_COLOR_TRANSFORM := true
#BOARD_USES_DISPLAYPORT := true
# if AFBC is enabled, must set ro.vendor.ddk.set.afbc=1
BOARD_USES_EXYNOS_AFBC_FEATURE := true
#BOARD_USES_HDRUI_GLES_CONVERSION := true
BOARD_LIBACRYL_DEFAULT_COMPOSITOR := fimg2d_gs101
BOARD_LIBACRYL_G2D_HDR_PLUGIN := libacryl_hdr_plugin
# HWCServices
BOARD_USES_HWC_SERVICES := true
# WiFiDisplay
# BOARD_USES_VIRTUAL_DISPLAY := true
# BOARD_USES_VDS_EXYNOS_HWC := true
# BOARD_USES_WIFI_DISPLAY:= true
# BOARD_USES_EGL_SURFACE_FOR_COMPOSITION_MIXED := true
# BOARD_USES_VDS_YUV420SPM := true
# BOARD_USES_VDS_OTHERFORMAT := true
# BOARD_USES_VDS_DEBUG_FLAG := true
# BOARD_USES_DISABLE_COMPOSITIONTYPE_GLES := true
# BOARD_USES_SECURE_ENCODER_ONLY := true
# BOARD_USES_TSMUX := true
# SCALER
BOARD_USES_DEFAULT_CSC_HW_SCALER := true
BOARD_DEFAULT_CSC_HW_SCALER := 4
BOARD_USES_SCALER_M2M1SHOT := true
# Device Tree
BOARD_USES_DT := true
BOARD_INCLUDE_DTB_IN_BOOTIMG := true
BOARD_PREBUILT_DTBIMAGE_DIR := $(TARGET_KERNEL_DIR)
BOARD_PREBUILT_DTBOIMAGE := $(BOARD_PREBUILT_DTBIMAGE_DIR)/dtbo.img
# PLATFORM LOG
TARGET_USES_LOGD := true
# LIBHWJPEG
#TARGET_USES_UNIVERSAL_LIBHWJPEG := true
#LIBHWJPEG_HWSCALER_ID := 0
#Keymaster
#BOARD_USES_KEYMASTER_VER1 := true
#FMP
#BOARD_USES_FMP_DM_CRYPT := true
#BOARD_USES_FMP_FSCRYPTO := true
BOARD_USES_METADATA_PARTITION := true
# SKIA
#BOARD_USES_SKIA_MULTITHREADING := true
#BOARD_USES_FIMGAPI_V5X := true
# SECCOMP Policy
BOARD_SECCOMP_POLICY = device/google/gs101/seccomp_policy
#CURL
BOARD_USES_CURL := true
# Sensor HAL
BOARD_USES_EXYNOS_SENSORS_DUMMY := true
# VISION
# Exynos vision framework (EVF)
#TARGET_USES_EVF := true
# HW acceleration
#TARGET_USES_VPU_KERNEL := true
#TARGET_USES_SCORE_KERNEL := true
#TARGET_USES_CL_KERNEL := false
# exynos RIL
TARGET_EXYNOS_RIL_SOURCE := true
ENABLE_VENDOR_RIL_SERVICE := true
# GNSS
# BOARD_USES_EXYNOS_GNSS_DUMMY := true
# Bluetooth defines
# TODO(b/123695868): Remove the need for this
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := \
build/make/target/board/mainline_arm64/bluetooth
#VNDK
BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED := true
BOARD_VNDK_VERSION := current
# H/W align restriction of MM IPs
BOARD_EXYNOS_S10B_FORMAT_ALIGN := 64
# WiFi
BOARD_WLAN_DEVICE := bcmdhd
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_bcmdhd
BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_bcmdhd
WPA_SUPPLICANT_VERSION := VER_0_8_X
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
BOARD_HOSTAPD_DRIVER := NL80211
# Wifi interface combination - {1 STA + 1 AP (bridged or single)} or {1 STA + 1 P2P}
# or {1 STA + 1 NAN} or {2 STA}
WIFI_HAL_INTERFACE_COMBINATIONS := {{{STA}, 1}, {{P2P, NAN, AP}, 1}}, {{{STA}, 2}}
WIFI_FEATURE_WIFI_EXT_HAL := true
WIFI_FEATURE_IMU_DETECTION := true
# Avoid Wifi reset on MAC Address change
WIFI_AVOID_IFACE_RESET_MAC_CHANGE := true
WIFI_FEATURE_HOSTAPD_11AX := true
# NeuralNetworks
GPU_SOURCE_PRESENT := $(wildcard vendor/arm/mali/valhall)
GPU_PREBUILD_PRESENT := $(wildcard vendor/google_devices/gs101/prebuilts/gpu/libs)
ifneq "$(or $(GPU_SOURCE_PRESENT),$(GPU_PREBUILD_PRESENT))" ""
ARMNN_COMPUTE_CL_ENABLE := 1
else
ARMNN_COMPUTE_CL_ENABLE := 0
endif
ARMNN_COMPUTE_NEON_ENABLE := 1
# Boot.img
BOARD_RAMDISK_USE_LZ4 := true
#BOARD_KERNEL_BASE := 0x80000000
#BOARD_KERNEL_PAGESIZE := 2048
#BOARD_KERNEL_OFFSET := 0x80000
#BOARD_RAMDISK_OFFSET := 0x4000000
BOARD_BOOT_HEADER_VERSION := 4
BOARD_MKBOOTIMG_ARGS += --header_version $(BOARD_BOOT_HEADER_VERSION)
BOARD_VENDOR_RAMDISK_FRAGMENTS := dlkm
BOARD_VENDOR_RAMDISK_FRAGMENT.dlkm.KERNEL_MODULE_DIRS := top
# Enable AVB2.0
BOARD_AVB_ENABLE := true
BOARD_BOOTIMAGE_PARTITION_SIZE := 0x04000000
BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE := 0x04000000
BOARD_DTBOIMG_PARTITION_SIZE := 0x01000000
# System As Root
BOARD_BUILD_SYSTEM_ROOT_IMAGE := false
# Vendor ramdisk image for kernel development
BOARD_BUILD_VENDOR_RAMDISK_IMAGE := true
BOARD_VENDOR_KERNEL_MODULES_BLOCKLIST_FILE := device/google/gs101/vendor_dlkm.blocklist
KERNEL_MODULE_DIR := $(TARGET_KERNEL_DIR)
KERNEL_MODULES := $(wildcard $(KERNEL_MODULE_DIR)/*.ko)
BOARD_VENDOR_RAMDISK_KERNEL_MODULES_LOAD := $(strip $(shell cat $(KERNEL_MODULE_DIR)/vendor_boot.modules.load))
ifndef BOARD_VENDOR_RAMDISK_KERNEL_MODULES_LOAD
$(error vendor_boot.modules.load not found or empty)
endif
BOARD_VENDOR_RAMDISK_KERNEL_MODULES := $(addprefix $(KERNEL_MODULE_DIR)/, $(notdir $(BOARD_VENDOR_RAMDISK_KERNEL_MODULES_LOAD)))
BOARD_VENDOR_KERNEL_MODULES_LOAD := $(strip $(shell cat $(KERNEL_MODULE_DIR)/vendor_dlkm.modules.load))
ifndef BOARD_VENDOR_KERNEL_MODULES_LOAD
$(error vendor_dlkm.modules.load not found or empty)
endif
BOARD_VENDOR_KERNEL_MODULES := $(KERNEL_MODULES)
# Using BUILD_COPY_HEADERS
BUILD_BROKEN_USES_BUILD_COPY_HEADERS := true
include device/google/gs101-sepolicy/gs101-sepolicy.mk
# Battery options
BOARD_KERNEL_CMDLINE += at24.write_timeout=100
# Enable larger logbuf
BOARD_KERNEL_CMDLINE += log_buf_len=1024K
-include vendor/google_devices/gs101/proprietary/BoardConfigVendor.mk
Reference in a new issue View git blame Copy permalink