Add a file "fstab.gs201-fips" alongside the existing "fstab.gs201" in
order to specify different encryption settings in FIPS mode.
"androidboot.fstab_suffix=gs201-fips" on the kernel command line will be
used to select the FIPS fstab when needed.
As the two fstabs should be otherwise identical, generate them from a
template file so that they will stay in sync.
Note that generating the fstabs requires that they be installed as build
system modules rather than via PRODUCT_COPY_FILES, which results in the
vendor_ramdisk copy of the fstabs being installed to system/etc rather
than /. This shouldn't cause any problem, now that Android has been
updated to look for the fstab in this location too.
(cherry-pick from device/google/gs101)
Test: Boot to home screen with/without fips mode
Bug: 202417706
Signed-off-by: Konstantin Vyshetsky <vkon@google.com>
Change-Id: I8fdc1c9a91399816fa2d4c53f282d63e988ce7d5
high-group is running on CPU 6-7.
mid-group is running on CPU 4-5.
mid-high-gropu is running on CPU 4-7.
Move camera tasks to CPU 4-7 for 1 seconds when AP launch.
(cherry-pick from device/google/gs101)
Bug: 205010238
Bug: 194271751
Test: GCA
Change-Id: I8e13e9ad0057b8f42f8ed3958bf0c6d58a5a02bc
Prefer high cap will choose the mid / high cores when possible with
consideration of energy efficiency.
Running task on high cores with low clock is more efficient than running
at little core with high clock.
This hint also addresses CTS issues with keeping latency_sensitive = 1.
(equivalent to prefer idle)
This hint adds:
1) Enable prefer_high_cap of camera vendor group
2) Set high_capacity_start_cpu to 4
4) Set MemFreq floor
5) Change camera-daemon/cpu.uclamp.latency_sensitive owner to root
(cherry-pick from device/google/gs101)
Bug: 205010238
Bug: 186564130
Test:
android.hardware.camera2.cts.RobustnessTest#testAeAndAfCausality (5/5)
android.hardware.cts.CameraTest#testPreviewCallback (5/5)
android.hardware.camera2.cts.CameraDeviceTest#testCameraDeviceRepeatingBurst (5/5)
android.hardware.cts.CameraTest#testFocusDistances (3/6). (3/6) without CL.
*****************************************************************
raven Camera CTS Test Results
*****************************************************************
Tests Passed: 217, Failed: 0, Not found: 0, Status unknown: 0
Change-Id: Ia2abb0eb9c57fa05c4db7bf1d02053e303301781
This is not needed in device-specific init.rc file, because it's
is superseded by commit https://r.android.com/1866693.
Bug: 203720638
Test: presubmit
Change-Id: I74cfa6f3aa0c9125559f3241ed8e23f8a8510616
On userdebug & eng builds, change the owner/group of SJTAG sysfs files
that need to be written to 'system', so that BetterBug is able to write
these files.
Bug: 204381544
Test: Ensure that the writable files in the following directories have
'system' as their owner & group:
/sys/devices/platform/sjtag_ap/interface/
/sys/devices/platform/sjtag_gsa/interface/
Signed-off-by: Peter Csaszar <pcsaszar@google.com>
Change-Id: I1fd61f702960a266bc8a2f84d1a1358ccefe3c9c
Changed the ownership of gc segment info sysfs nodes for Pixelstats
to access these values.
Test: check the ownership of
/dev/sys/fs/by-name/userdata/<gc_segment_mode|gc_reclaimed_segments>
Bug: 201503046
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Ocean Chen <oceanchen@google.com>
Change-Id: I827538be0801cd8abc26b095df56849fd2ff141a
Currently the persist partition is formatted as ext4. In order to
convert the partition to f2fs without losing data, add a script which
will copy the partition contents out, format the partition as f2fs and
then copy the contents back.
Bug: 202511062
Signed-off-by: Konstantin Vyshetsky <vkon@google.com>
Change-Id: I89502694d1e02261902525c11ac875dd7756721b
A cherry pick from 49a13bf for gs101
Bug: 199252036
Test: Boot to home and usb hal bring up normally
Change-Id: Ia4e344aa9cf7762b71cbfe35ff9cbcccb4474b11
Bug: 197026498
Test: make dist and check [vbmeta_vendor.img + img.zip + ota.zip]
Test: flash [fastboot update + remote_local_flashstation] and boot to home
Change-Id: I0f7c69218d296451da2cef6e47adf3a910ea1cb0
Fix the error log:
init : Unable to read config file 'init.gs201.usb.rc'
Bug: 196523163
Test: USB works well in Android, bootloader fastboot and
flash station
Signed-off-by: Albert Wang <albertccwang@google.com>
Change-Id: I7a30ab93477bb3a95cb44fa6f265b5e1d432b69c
This reverts commit 5294123ac1.
We can revert this workaround since USB driver and HAL get ready
Test: USB works well in Android, bootloader, fastbootd and
flash station
Change-Id: Icfec04d22c604937b92cd892f5d429aee35e8ce9
This is to expose a common path to runtime. This is the gs201 version of the WCH change ag/15100070. It alias /dev/janeiro to /dev/edgetpu. This is a temporary measure to make /dev/edgetpu work. Once the TPU kernel driver is refactored to produce /dev/edgetpu by default, we'll remove this symlink.
Test: Manual. Verified edgetpu_logging works with modified path
Bug: 191193044
Change-Id: Icc70264c0c7d20ea7b6aa43903e109d9180dd022
This partially reverts commit 28140b7240.
USB will hold a wakelock preventing suspend to happen
Bug: 188796118
Signed-off-by: Thierry Strudel <tstrudel@google.com>
Change-Id: Idc583a025e429a5b5f13a94b732717e9491e4e55
Give TPU device path (/dev/janeiro) the same access permission as /dev/abrolhos. This change is similar
to what we did for WCH, but for PRO.
Bug: 191185522
Test: run_tflite_test_odc passes.
https://paste.googleplex.com/5466657955774464
Change-Id: If735e699c0c9ec842f915ebc7b59d0896f4c776c
This is a workaround to get adb working while USB is being brought up.
(cherry-pick from device/google/cloudripper)
Bug: 188672439
Signed-off-by: Pat Tjin <pattjin@google.com>
Change-Id: Ie114c1f67198a10a6c0dda49d1ed2ee85c8b2bf5
Hold wakelock on boot to mitigate b/188796118
(cherry-pick from device/google/cloudripper)
Bug: 188796118
Signed-off-by: Pat Tjin <pattjin@google.com>
Change-Id: Ia75d355eaed0d469f791f126aaed1c0059df0abd
