From f406f92da470a5c4d5c4b58b167b0a981448a7a6 Mon Sep 17 00:00:00 2001 From: Michael Bestas Date: Thu, 19 Jun 2025 01:45:29 +0300 Subject: [PATCH] lynx: Remove all boards except lynx Change-Id: Ib34dd38d55f39e9a61c0f61d9c659e07494177a1 --- AndroidProducts.mk | 5 - aosp_lynx_hwasan.mk | 23 -- audio/lynx/config/mixer_paths_factory.xml | 389 ---------------------- audio/lynx/factory-audio-tables.mk | 22 -- device-lynx.mk | 4 - factory_lynx.mk | 40 --- nfc/libnfc-hal-st-disable.conf | 152 --------- nfc/libnfc-nci-cheetah.conf | 121 ------- nfc/libnfc-nci.conf | 121 ------- 9 files changed, 877 deletions(-) delete mode 100644 aosp_lynx_hwasan.mk delete mode 100644 audio/lynx/config/mixer_paths_factory.xml delete mode 100644 audio/lynx/factory-audio-tables.mk delete mode 100644 factory_lynx.mk delete mode 100644 nfc/libnfc-hal-st-disable.conf delete mode 100644 nfc/libnfc-nci-cheetah.conf delete mode 100644 nfc/libnfc-nci.conf diff --git a/AndroidProducts.mk b/AndroidProducts.mk index 8289588..d037c20 100644 --- a/AndroidProducts.mk +++ b/AndroidProducts.mk @@ -16,9 +16,4 @@ PRODUCT_MAKEFILES := \ $(LOCAL_DIR)/aosp_lynx.mk \ - $(LOCAL_DIR)/aosp_lynx_hwasan.mk \ - $(LOCAL_DIR)/factory_lynx.mk \ $(LOCAL_DIR)/lineage_lynx.mk - -COMMON_LUNCH_CHOICES := \ - aosp_lynx-trunk_staging-userdebug diff --git a/aosp_lynx_hwasan.mk b/aosp_lynx_hwasan.mk deleted file mode 100644 index d0845b6..0000000 --- a/aosp_lynx_hwasan.mk +++ /dev/null @@ -1,23 +0,0 @@ -# -# Copyright 2023 The Android Open Source Project -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -$(call inherit-product, device/google/lynx/aosp_lynx.mk) -PRODUCT_NAME := aosp_lynx_hwasan - -# Add "hwaddress" as a global sanitizer if it's missing. -ifeq ($(filter hwaddress,$(SANITIZE_TARGET)),) - SANITIZE_TARGET := $(strip $(SANITIZE_TARGET) hwaddress) -endif diff --git a/audio/lynx/config/mixer_paths_factory.xml b/audio/lynx/config/mixer_paths_factory.xml deleted file mode 100644 index 47c247b..0000000 --- a/audio/lynx/config/mixer_paths_factory.xml +++ /dev/null @@ -1,389 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/audio/lynx/factory-audio-tables.mk b/audio/lynx/factory-audio-tables.mk deleted file mode 100644 index 24732a6..0000000 --- a/audio/lynx/factory-audio-tables.mk +++ /dev/null @@ -1,22 +0,0 @@ -# -# Copyright (C) 2021 The Android Open-Source Project -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -AUDIO_FACTORY_TABLE_FOLDER := lynx - -# Mixer Path Configuration for Audio Factory -PRODUCT_COPY_FILES += \ - device/google/lynx/audio/$(AUDIO_FACTORY_TABLE_FOLDER)/config/mixer_paths_factory.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths_factory.xml - diff --git a/device-lynx.mk b/device-lynx.mk index 4b74b5f..cea449a 100644 --- a/device-lynx.mk +++ b/device-lynx.mk @@ -160,11 +160,7 @@ include device/google/lynx/bluetooth/qti_default.mk # Fingerprint HAL GOODIX_CONFIG_BUILD_VERSION := g7_trusty $(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_common.mk) -ifeq ($(filter factory%, $(TARGET_PRODUCT)),) $(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_shipping.mk) -else -$(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_factory.mk) -endif # Vibrator HAL $(call soong_config_set,haptics,kernel_ver,v$(subst .,_,$(TARGET_LINUX_KERNEL_VERSION))) diff --git a/factory_lynx.mk b/factory_lynx.mk deleted file mode 100644 index 0a13c17..0000000 --- a/factory_lynx.mk +++ /dev/null @@ -1,40 +0,0 @@ -# -# Copyright 2021 The Android Open-Source Project -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -TARGET_LINUX_KERNEL_VERSION := 5.10 - -$(call inherit-product, device/google/gs201/factory_common.mk) -$(call inherit-product, device/google/lynx/device-lynx.mk) -include device/google/lynx/audio/lynx/factory-audio-tables.mk - -PRODUCT_NAME := factory_lynx -PRODUCT_DEVICE := lynx -PRODUCT_MODEL := Factory build on Lynx -PRODUCT_BRAND := Android -PRODUCT_MANUFACTURER := Google - -# default BDADDR for EVB only -PRODUCT_PROPERTY_OVERRIDES += \ - ro.vendor.bluetooth.evb_bdaddr="22:22:22:33:44:55" - -# Factory binaries of camera -PRODUCT_PACKAGES += fatp_imx787_hat_tool - -# Factory binaries of wifi -PRODUCT_PACKAGES += athdiag -PRODUCT_PACKAGES += libdiag -PRODUCT_PACKAGES += libtime_genoff -PRODUCT_PACKAGES += cnss_diag diff --git a/nfc/libnfc-hal-st-disable.conf b/nfc/libnfc-hal-st-disable.conf deleted file mode 100644 index 2b455df..0000000 --- a/nfc/libnfc-hal-st-disable.conf +++ /dev/null @@ -1,152 +0,0 @@ -########################### Start of libnf-hal-st_aosp.conf ########################### - -############################################################################### -############################################################################### -# ST HAL trace log level -STNFC_HAL_LOGLEVEL=4 -NFC_DEBUG_ENABLED=1 - -############################################################################### -# Vendor specific mode to enable FW (RF & SWP) traces. -STNFC_FW_DEBUG_ENABLED=0 - -############################################################################### -# File used for NFA storage -NFA_STORAGE="/data/nfc" - -############################################################################### -# Dev Node used for ST HAL -ST_NFC_DEV_NODE="/dev/st_no_such_device" - -############################################################################### -# Keep the nfa storage file. -PRESERVE_STORAGE=1 - -############################################################################### -# In Switch OFF mode (phone switched-off), specify the desired CE mode to -# the controller. -# 0: No card-emulation; DEFAULT -# 1: Switch-off card-emulation enabled -CE_ON_SWITCH_OFF_STATE=1 - -############################################################################### -# Vendor specific mode to support the USB charging mode if VPSIO=1 in switch off. -STNFC_USB_CHARGING_MODE=1 - -############################################################################### -# Vendor Specific Proprietary Protocol & Discovery Configuration -# Set to 0xFF if unsupported -# byte[0] NCI_PROTOCOL_18092_ACTIVE -# byte[1] NCI_PROTOCOL_B_PRIME -# byte[2] NCI_PROTOCOL_DUAL -# byte[3] NCI_PROTOCOL_15693 -# byte[4] NCI_PROTOCOL_KOVIO -# byte[5] NCI_PROTOCOL_MIFARE -# byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO -# byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME -# byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME -NFA_PROPRIETARY_CFG={05:FF:FF:06:8A:90:77:FF:FF} - -############################################################################### -# Choose the presence-check algorithm for type-4 tag. If not defined, -# the default value is 1. -# 0 NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm -# 1 NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block -# 2 NFA_RW_PRES_CHK_RESET; Deactivate to Sleep, then re-activate -# 3 NFA_RW_PRES_CHK_RB_CH0; Type-4 tag protocol's ReadBinary command on channel 0 -# 4 NFA_RW_PRES_CHK_RB_CH3; Type-4 tag protocol's ReadBinary command on channel 3 -# 5 NFA_RW_PRES_CHK_ISO_DEP_NAK; presence check command ISO-DEP NAK as per NCI2.0 -PRESENCE_CHECK_ALGORITHM=5 - -############################################################################### -# Name of the NCI HAL module to use -# If unset, falls back to nfc_nci.bcm2079x -NCI_HAL_MODULE="nfc_nci.st21nfc" - -############################################################################### -# White list to be set at startup. -DEVICE_HOST_WHITE_LIST={02:C0} - -############################################################################### -# BAIL OUT value for P2P -# Implements algorithm for NFC-DEP protocol priority over ISO-DEP protocol. -POLL_BAIL_OUT_MODE=1 - -############################################################################### -# Extended APDU length for ISO_DEP -ISO_DEP_MAX_TRANSCEIVE=0xFEFF - -############################################################################### -# Configure the NFC Extras to open and use a static pipe. If the value is -# not set or set to 0, then the default is use a dynamic pipe based on a -# destination gate (see NFA_HCI_DEFAULT_DEST_GATE). Note there is a value -# for each EE (ESE/SIM) -OFF_HOST_ESE_PIPE_ID=0x5E -OFF_HOST_SIM_PIPE_ID=0x3E - -############################################################################### -#Set the default Felica T3T System Code OffHost route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE) -# UICC 0x81 (UICC_1), 0x85 (UICC_2) -DEFAULT_SYS_CODE_ROUTE=0x86 - -############################################################################### -#Set the Felica T3T System Code supported power state: -DEFAULT_SYS_CODE_PWR_STATE=0x3B - -############################################################################### -# Path and Files used for FW update binaries storage -STNFC_FW_PATH_STORAGE="/vendor/firmware" -STNFC_FW_BIN_NAME="/st54j_fw.bin" -STNFC_FW_CONF_NAME="/st54j_conf.bin" - -############################################################################### -# Default off-host route for Felica. -# This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE) -# UICC 0x81 (UICC_1), 0x85 (UICC_2) -DEFAULT_NFCF_ROUTE=0x86 - -############################################################################### -# Configure the default off-host route. -# used for technology A and B routing -# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE) -# UICC 0x81 (UICC_1), 0x85 (UICC_2) -DEFAULT_OFFHOST_ROUTE=0x81 - -############################################################################### -# Configure the default AID route. -# host 0x00 -# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE) -# UICC 0x81 (UICC_1), 0x85 (UICC_2) -DEFAULT_ROUTE=0x00 - -############################################################################### -# Configure the NFCEEIDs of offhost UICC. -# UICC 0x81 (UICC_1), 0x85 (UICC_2) -OFFHOST_ROUTE_UICC={81} - -############################################################################### -# Configure the NFCEEIDs of offhost eSEs. -# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE) -OFFHOST_ROUTE_ESE={86} - -############################################################################### -# Configure the list of NFCEE for the ISO-DEP routing. -# host 0x00 -# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE) -# UICC 0x81 (UICC_1), 0x85 (UICC_2) -DEFAULT_ISODEP_ROUTE=0x81 - -############################################################################### -# Core configuration settings -CORE_CONF_PROP={ 20, 02, 0a, 03, - a1, 01, 1e, - a2, 01, 19, - 80, 01, 01 -} - - diff --git a/nfc/libnfc-nci-cheetah.conf b/nfc/libnfc-nci-cheetah.conf deleted file mode 100644 index e3635f0..0000000 --- a/nfc/libnfc-nci-cheetah.conf +++ /dev/null @@ -1,121 +0,0 @@ -############################################################################### -# Application options -NFC_DEBUG_ENABLED=0 - -############################################################################### -# File used for NFA storage -NFA_STORAGE="/data/nfc" - -############################################################################### -# Force UICC to only listen to the following technology(s). -# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. -# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F -UICC_LISTEN_TECH_MASK=0x00 - -############################################################################### -# Set HOST default listen to the following technology(s). -# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. -# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F -# 0x07 = A + B + F -HOST_LISTEN_TECH_MASK=0x07 - -############################################################################### -# AID for Empty Select command -# If specified, this AID will be substituted when an Empty SELECT command is -# detected. The first byte is the length of the AID. Maximum length is 16. -AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00} - -############################################################################### -# When screen is turned off, specify the desired power state of the controller. -# 0: power-off-sleep state; DEFAULT -# 1: full-power state -# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used) -SCREEN_OFF_POWER_STATE=1 - -############################################################################### -# Force tag polling for the following technology(s). -# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. -# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | -# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 | -# NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO | -# NFA_TECHNOLOGY_MASK_ACTIVE -# -# Notable bits: -# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ -# NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */ -# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ -# NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */ -# NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */ -# NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */ -POLLING_TECH_MASK=0x2F - -############################################################################### -# Force P2P to only listen for the following technology(s). -# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. -# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F | -# NFA_TECHNOLOGY_MASK_ACTIVE -# -# Notable bits: -# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ -# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ -# NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */ -P2P_LISTEN_TECH_MASK=0x00 - -PRESERVE_STORAGE=0x01 - -############################################################################### -# Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h. -# The value is set to 3 by default as it assumes we will discover 0xF2, -# 0xF3, and 0xF4. If a platform will exclude and SE, this value can be reduced -# so that the stack will not wait any longer than necessary. -# Maximum EE supported number -# NXP PN547C2 0x02 -# NXP PN65T 0x03 -# NXP PN548C2 0x02 -# NXP PN66T 0x03 -NFA_MAX_EE_SUPPORTED=0x01 - -############################################################################### -# AID_MATCHING constants -# AID_MATCHING_EXACT_ONLY 0x00 -# AID_MATCHING_EXACT_OR_PREFIX 0x01 -# AID_MATCHING_PREFIX_ONLY 0x02 -# AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03 -AID_MATCHING_MODE=0x03 - -############################################################################### -#Set the default Felica T3T System Code : -#This settings will be used when application does not set this parameter -DEFAULT_SYS_CODE={FE:FE} - -############################################################################### -# Value of NIC parameter NFCC_COFNIG_CONTROL -# 0x00 NFCC is not allowed to manage RF configuration -# 0x01 NFCC is allowed to manage RF configuration -NFCC_CONFIG_CONTROL=0x01 - -############################################################################### -#Set if the AID routing should be blocked for the power modes not supported. -NFA_AID_BLOCK_ROUTE=1 - -############################################################################### -#Set the OffHost AID supported power state: -OFFHOST_AID_ROUTE_PWR_STATE=0x3B - -############################################################################### -# Mifare Tag implementation -# 0: General implementation -# 1: Legacy implementation -LEGACY_MIFARE_READER=0 - -############################################################################### -# Nfc recovery implementation -# 0: Crash Nfc Service -# 1: Toggle Nfc state -RECOVERY_OPTION=1 - -############################################################################### -# NFCEE Power Supply and Communication Link Control Configuration -# Set when SetAlwaysOn enabled -# Default 0x00 when SetAlways on disabled -ALWAYS_ON_SET_EE_POWER_AND_LINK_CONF=0x03 diff --git a/nfc/libnfc-nci.conf b/nfc/libnfc-nci.conf deleted file mode 100644 index 3940b1f..0000000 --- a/nfc/libnfc-nci.conf +++ /dev/null @@ -1,121 +0,0 @@ -############################################################################### -# Application options -NFC_DEBUG_ENABLED=0 - -############################################################################### -# File used for NFA storage -NFA_STORAGE="/data/nfc" - -############################################################################### -# Force UICC to only listen to the following technology(s). -# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. -# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F -UICC_LISTEN_TECH_MASK=0x07 - -############################################################################### -# Set HOST default listen to the following technology(s). -# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. -# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F -# 0x07 = A + B + F -HOST_LISTEN_TECH_MASK=0x07 - -############################################################################### -# AID for Empty Select command -# If specified, this AID will be substituted when an Empty SELECT command is -# detected. The first byte is the length of the AID. Maximum length is 16. -AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00} - -############################################################################### -# When screen is turned off, specify the desired power state of the controller. -# 0: power-off-sleep state; DEFAULT -# 1: full-power state -# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used) -SCREEN_OFF_POWER_STATE=1 - -############################################################################### -# Force tag polling for the following technology(s). -# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. -# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | -# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 | -# NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO | -# NFA_TECHNOLOGY_MASK_ACTIVE -# -# Notable bits: -# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ -# NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */ -# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ -# NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */ -# NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */ -# NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */ -POLLING_TECH_MASK=0x2F - -############################################################################### -# Force P2P to only listen for the following technology(s). -# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. -# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F | -# NFA_TECHNOLOGY_MASK_ACTIVE -# -# Notable bits: -# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ -# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ -# NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */ -P2P_LISTEN_TECH_MASK=0x00 - -PRESERVE_STORAGE=0x01 - -############################################################################### -# Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h. -# The value is set to 3 by default as it assumes we will discover 0xF2, -# 0xF3, and 0xF4. If a platform will exclude and SE, this value can be reduced -# so that the stack will not wait any longer than necessary. -# Maximum EE supported number -# NXP PN547C2 0x02 -# NXP PN65T 0x03 -# NXP PN548C2 0x02 -# NXP PN66T 0x03 -NFA_MAX_EE_SUPPORTED=0x02 - -############################################################################### -# AID_MATCHING constants -# AID_MATCHING_EXACT_ONLY 0x00 -# AID_MATCHING_EXACT_OR_PREFIX 0x01 -# AID_MATCHING_PREFIX_ONLY 0x02 -# AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03 -AID_MATCHING_MODE=0x03 - -############################################################################### -#Set the default Felica T3T System Code : -#This settings will be used when application does not set this parameter -DEFAULT_SYS_CODE={FE:FE} - -############################################################################### -# Value of NIC parameter NFCC_COFNIG_CONTROL -# 0x00 NFCC is not allowed to manage RF configuration -# 0x01 NFCC is allowed to manage RF configuration -NFCC_CONFIG_CONTROL=0x01 - -############################################################################### -#Set if the AID routing should be blocked for the power modes not supported. -NFA_AID_BLOCK_ROUTE=1 - -############################################################################### -#Set the OffHost AID supported power state: -OFFHOST_AID_ROUTE_PWR_STATE=0x3B - -############################################################################### -# Mifare Tag implementation -# 0: General implementation -# 1: Legacy implementation -LEGACY_MIFARE_READER=0 - -############################################################################### -# Nfc recovery implementation -# 0: Crash Nfc Service -# 1: Toggle Nfc state -RECOVERY_OPTION=1 - -############################################################################### -# NFCEE Power Supply and Communication Link Control Configuration -# Set when SetAlwaysOn enabled -# Default 0x00 when SetAlways on disabled -ALWAYS_ON_SET_EE_POWER_AND_LINK_CONF=0x03