This reverts commit 0952694db7.
Added cooling devices for TPU/GPU and hence can bring back
the dependency
Bug: 218541675
Test: build and boot on device
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: Idd664160d5f9c30ad9c44221a7f0129315f1e415
Bug: 218541675
Test: Boot and confirm state change on device
Signed-off-by: George Lee <geolee@google.com>
Change-Id: I17bef07a9d6414617b5fd44c75661da146ac67ff
We will have a 'vendor' project containing proprietary blobs
to be able to build and flash Pixel device when vendor source is not
available.
The project names are
platform/vendor/aosp/google_devices/cheetah
platform/vendor/aosp/google_devices/panther
and the paths are
vendor/google_devices/cheetah
vendor/google_devices/panther
TEST:make and flash a panther device
BUG: 217478568
Change-Id: Ibddebeab3cca4b4dfab12be519a099ca60ddd0c7
This CL updates resource overlay of
rounded_corner_content_padding
so that the same device-specific value can be seen from both the
Framework code and the SysUI.
With my previous CL [1], the SysUI continues to see the same value
even after this migration.
[1]: I0c3717c0bdfc928167c6eba06247b37caabf33b9
24d6b891f572f7be419d3acc9793ca68d062cf35
Bug: 215554582
Test: presubmit
Change-Id: I373b59068959d96f46f8d2d48e4923fbe8c961c8
Bug: 204271308
Test: Boot and confirm temperature reading
Signed-off-by: George Lee <geolee@google.com>
Change-Id: I10b15a4863dbbc11b9d2149b3fda73f860717a3f
Remove DEVICE_USES_NO_TRUSTY.
Can't find this referenced anywhere, might just
be confusion-causing.
Bug: 215592080
Change-Id: I0ff62461fd2e7cd6436cdf1f17b9ffefd1afb9c9
Change list:
1.Update the firmware to v6.63(comment#6)
2.Re-Characterize speaker model with EVT samples.
Bug: 198765357
Test: Builds
Change-Id: I2b0462c56361b5841893118d0e45871a27783817
Signed-off-by: Robert Lee <lerobert@google.com>
Bug: 197028142
Test: Boot and confirm temperature reading
Signed-off-by: George Lee <geolee@google.com>
Change-Id: If63882cd7335e002a6df51cd6bd1d37f5d8d24e3
Change list:
1.Update the firmware to v6.63(comment#5)
2.Update the EVT SP model-Version3
Bug: 199029784
Test: Builds
Change-Id: I9c62f761aefb7dfe172399849cfc14b4f3223cbd
Signed-off-by: Robert Lee <lerobert@google.com>
- The audio-tables.mk is a project specific makefile, the installed
file should able to override the common makefile's setting.
Bug: 214374267
Test: Make sure the file added in audio-tables.mk can override the common one.
Change-Id: I875be3d5840aa0ebc108e15160adce305b805040
This reverts commit d5d0e9f343.
Reason for revert: <AOC FW that supports Spatial audio capture has been reverted>
Change-Id: I18286694da289215193c3e39ad71ea4a50392a69
- specific top speaker control doesn't merge becuase of pop sound issue
during turning on/off a speaker.
Bug: 207431993
Test: manual test (b/207431993#comment16)
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ieca51d1f0ca238ff0d9112e8ede9d2eaad28ce98
Enable default 96k sample rate to fix the noise issue when enabling
96k speaker protection with 48k sample rate setting.
Bug: 206060532
Test: audio normal after device boot with speaker protection enabled
Change-Id: I28e58731b49b18ee14b9a1195c549e71a231d0ee
Signed-off-by: Robert Lee <lerobert@google.com>
Write the sysfs node to set touch sensitivity mode when the property
changes.
Bug: 199104397
Test: toggle the touch sensitivity button in Settings and check log.
Signed-off-by: davidycchen <davidycchen@google.com>
Change-Id: I1bd9258dcfa6897ee6febc5387c9504bcca1bb24
Route a debug system property to a persist system property to control
the touch driver attribute file glove_mode.
0: default sensitivity mode (default)
1: high sensitivity mode
Bug: 199105017
Test: manual test
Signed-off-by: Mason Wang <masonwang@google.com>
Change-Id: I30f91ebaf4ea2bb2d2db6090f035e0ba7ea37056
