The correct path should be under /data,
or it is not writable.
wpa_supplicant now support p2p overlay configuration, a unified
wpa_supplicant init entry can be used.
Bug: 238601241
Test: create a group and check this group is persisted
after reboot
Change-Id: I6f471aed60b56862ba9a8b0bb12d50ef6305faba
Allow these devices to send CPU hints to PowerHAL from SF to reduce
drops and save power.
Bug: 195990840
Test: manual
Change-Id: Idb7dad41852c71bff9b3c63d2d75849128288080
(cherry picked from commit 2dd1a62ca4)
The correct path should be under /data,
or it is not writable.
wpa_supplicant now support p2p overlay configuration, a unified
wpa_supplicant init entry can be used.
Bug: 238601241
Test: create a group and check this group is persisted
after reboot
Change-Id: I803badb16c67aba741b0804485a714bd5b179223
- Separate thermal config for charger mode and remove the unused thermal
throttling.
- Move charger pixel-thermal-symlink from common to project folder
to prevent the GKI version dependencies from blocking init.
Bug: 240897207
Test: usbc overheating protection and charging throttling worked
properly in charger.
Change-Id: I0ba3dabcc8c0c74e7e9334bc04a6fac875ac6b6c
Wait for other modules to complete init, postpone thermal.symlinks init.
And also add symlinks in charger.
Bug: 200615564
Test: thermal symlinks can be created in dev folder
Change-Id: I64a46d299da6bef738f998bb65b26403b6515ed5
Set it to "reset" in order to reset ST54K eSE at NFC hal init.
Bug: 232204531
Test: check eSE reset process starts at boot
Change-Id: I9f5863f963716ddceabbd540fbde32abec0a38b4
New version of thermal engine (Powerlink v2) uses ODPM data for
thermal mitigation. But proto devices does not support ODPM.
Currently we have disabled thermal mitigation for all A0 based
devices through a separate config, thermal_info_config_A0.json.
This change restricts using separate thermal config only for the
proto devices and uses thermal_info_config.json for the rest.
Fix a format issue with qi-quiet sensor definition.
Bug: 196478280
Test: Build and boot on device. Check thermal config
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I0922e935cafe118f3437335e2a72b87aae6f6009
This patch change owner of Bluetooth Timesync node to be Bluetooth to
allow Bluetooth HAL to read controller timestamp data via this node.
Bug: 226659256
Test: make
Change-Id: I70010daf45186235a48633355b5641b38597b2d6
- Create separate powerhint json files for a0 soc
- Add control/switchon powerhints for all IPs
- Change thermal severity level to LIGHT
- Update trip temps as per policy
Bug: 194509203
Test: Build and boot on device. Check change of trip temperatures
after the thermal severity of LIGHT
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: Ibd19ea16d0fee25dec801b287e1eab05699a8d7f
Bug: 225351394
Test: Verified twoshay not running in charger mode using cereal (P31701277).
Signed-off-by: Mark Chang <changmark@google.com>
Change-Id: Iad139a8340f5a8e6ee53ba434edc3b98379f68e2
Write the sysfs node to set touch sensitivity mode when the property
changes.
Bug: 199104397
Test: toggle the touch sensitivity button in Settings and check log.
Signed-off-by: davidycchen <davidycchen@google.com>
Change-Id: I1bd9258dcfa6897ee6febc5387c9504bcca1bb24
Route a debug system property to a persist system property to control
the touch driver attribute file glove_mode.
0: default sensitivity mode (default)
1: high sensitivity mode
Bug: 199105017
Test: manual test
Signed-off-by: Mason Wang <masonwang@google.com>
Change-Id: I30f91ebaf4ea2bb2d2db6090f035e0ba7ea37056
Loads old cfg for proto and some of the evt.
The others loads default cfg.
Bug: 210755812
Test: manual
Change-Id: Ie892fed0d3e50ed2e1efb7f8ebc9d65bc5c5a63d
Update init.cheetah.rc to make device able to check ro.boot.hardware.revision
Bug: 210755812
Test: Test with C10 proto, pass
Change-Id: Ibdbd43d2c8718d3fe6161f2bf190255daff350ae
Update init.panther.rc to make device able to check ro.boot.hardware.revision
Add libnfc-hal-st-proto1.conf to load st54j_conf_PROTO1.bin for proto1
BYPASS_INCLUSIVE_LANGUAGE_REASON=Keep the legacy name
Bug: 209525702
Test: Manually update .rc file, .conf file and st54j_conf_PROTO1.bin
to P10 proto1, then check the CFG version which is loaded
Change-Id: I33dd4d0dacb01bb544997913800a2c2ecc92b34e
