Remove DEVICE_USES_NO_TRUSTY.
Can't find this referenced anywhere, might just
be confusion-causing.
Bug: 215592080
Change-Id: I0ff62461fd2e7cd6436cdf1f17b9ffefd1afb9c9
Change list:
1.Update the firmware to v6.63(comment#6)
2.Re-Characterize speaker model with EVT samples.
Bug: 198765357
Test: Builds
Change-Id: I2b0462c56361b5841893118d0e45871a27783817
Signed-off-by: Robert Lee <lerobert@google.com>
Bug: 197028142
Test: Boot and confirm temperature reading
Signed-off-by: George Lee <geolee@google.com>
Change-Id: If63882cd7335e002a6df51cd6bd1d37f5d8d24e3
Change list:
1.Update the firmware to v6.63(comment#5)
2.Update the EVT SP model-Version3
Bug: 199029784
Test: Builds
Change-Id: I9c62f761aefb7dfe172399849cfc14b4f3223cbd
Signed-off-by: Robert Lee <lerobert@google.com>
- The audio-tables.mk is a project specific makefile, the installed
file should able to override the common makefile's setting.
Bug: 214374267
Test: Make sure the file added in audio-tables.mk can override the common one.
Change-Id: I875be3d5840aa0ebc108e15160adce305b805040
This reverts commit d5d0e9f343.
Reason for revert: <AOC FW that supports Spatial audio capture has been reverted>
Change-Id: I18286694da289215193c3e39ad71ea4a50392a69
- specific top speaker control doesn't merge becuase of pop sound issue
during turning on/off a speaker.
Bug: 207431993
Test: manual test (b/207431993#comment16)
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ieca51d1f0ca238ff0d9112e8ede9d2eaad28ce98
Enable default 96k sample rate to fix the noise issue when enabling
96k speaker protection with 48k sample rate setting.
Bug: 206060532
Test: audio normal after device boot with speaker protection enabled
Change-Id: I28e58731b49b18ee14b9a1195c549e71a231d0ee
Signed-off-by: Robert Lee <lerobert@google.com>
Write the sysfs node to set touch sensitivity mode when the property
changes.
Bug: 199104397
Test: toggle the touch sensitivity button in Settings and check log.
Signed-off-by: davidycchen <davidycchen@google.com>
Change-Id: I1bd9258dcfa6897ee6febc5387c9504bcca1bb24
Route a debug system property to a persist system property to control
the touch driver attribute file glove_mode.
0: default sensitivity mode (default)
1: high sensitivity mode
Bug: 199105017
Test: manual test
Signed-off-by: Mason Wang <masonwang@google.com>
Change-Id: I30f91ebaf4ea2bb2d2db6090f035e0ba7ea37056
Create config.xml to support device suspend when screen off due to
p-sensor and enable adaptive brightness. A follow up patch may be
needed after tuning the auto brightness table.
Bug: 208528546
Test: brightness and adaptive brightness manual test
Change-Id: Ie559cbb2d656d4c5d46d28e200f44d27d2e037a6
Loads old cfg for proto and some of the evt.
The others loads default cfg.
Bug: 210755812
Test: manual
Change-Id: Ie892fed0d3e50ed2e1efb7f8ebc9d65bc5c5a63d
Update init.cheetah.rc to make device able to check ro.boot.hardware.revision
Bug: 210755812
Test: Test with C10 proto, pass
Change-Id: Ibdbd43d2c8718d3fe6161f2bf190255daff350ae
Update init.panther.rc to make device able to check ro.boot.hardware.revision
Add libnfc-hal-st-proto1.conf to load st54j_conf_PROTO1.bin for proto1
BYPASS_INCLUSIVE_LANGUAGE_REASON=Keep the legacy name
Bug: 209525702
Test: Manually update .rc file, .conf file and st54j_conf_PROTO1.bin
to P10 proto1, then check the CFG version which is loaded
Change-Id: I33dd4d0dacb01bb544997913800a2c2ecc92b34e
Create config.xml to support device suspend when screen off due to
p-sensor and enable adapative brightness. Modify auto brightness
table to support 1000 nits in HBM mode.
Bug: 208358826
Bug: 199469930
Test: brightness and adaptive brightness manual test
Change-Id: I0831a7783f7a383fa86ddea180d76d9ef4ba9f97
Bug: 205055813
Test: Manually update bin files and run
adb shell crus_sp_cal -d -s -a --device 5 --ambient 25 --num-speaker 2 --verbosity 7
result: Everything is good
Change-Id: Iba25fcb3cc0252baf87df0b4424a73d3790ed379
Signed-off-by: Robert Lee <lerobert@google.com>
