Change to use pcm id 30 for immersive output,
which is using raw path in AoC to get lower
roundtrip latency.
Bug: 237677573
Test: spatial audio playback
Change-Id: I6519f75daf2f65dc8f1e2a4a3827f8956f563c35
FM table change list:
1. HA
1) Fine tune P10C10 TMOUS tuning for DVT stage
2) Fine tune P10C10 NB NS performance
2. HE
1) Align the same setting between Rx1 to Rx2
2) Align the same setting between HEADSET-USB_BLACKBIRD-VOICE_GENERIC-SWB
and HEADSET-USB_BLACKBIRD-VOICE_RESERVE2-SWB
3. BT
Enable RX low latency mode
Bug: 236210273
Test: Acoustic team verified
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I3c347bb740a447cb1fb78b3391acaa3247107220
change list :
1) mic_path : IIR fine tune on both mono and stereo mode
2) mic_path : mic swap in stereo mode, top mic in ch1,
bot mic in ch2
3) camcorder_path : zoom gain set as "1" in surround
module in selfie mode
Bug: 236236611
Test: Audio tuning team verified
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I079d57cb16337482994ae5ba2b2a00a143d22f26
Enable gapless support on compressed_offload w/o trimming delay and padding.
Bug: 230305456
Test: test with AOSP Music and MediaMonkey
Change-Id: Ie1129a5323a2225c895cb3f1b332065bc5924075
Signed-off-by: Robert Lee <lerobert@google.com>
Compress-offload also needs to adjust the latency
to meet the av sync result.
Bug: 234104918
Test: Play AV sync video in YTMusic test apk
Change-Id: I45e4b2d2c477ae2eae14d7342e3a81c38ec61cb4
For C10_LL_Pt_Ls_mix3500M_volCurve_allModes_Speaker_Safe_ONEAL_V2.mps:
- Non media, update the speaker-safe preset for
Ringtone/Notification/Alarm stream
- sha1sum: b813efb994561b71715c075c0d34ad8c1a009ade
/vendor/etc/waves_preset.mps
For P10_LL_Pt_Ls_mix2000_volCurve_allModes_Speaker_Safe_ONEAL.mps:
- Non media, update the speaker-safe preset for
Ringtone/Notification/Alarm stream
- sha1sum: 32a42b5ad6f2c2b3b79b2a33d3f53329edf61047
/vendor/etc/waves_preset.mps
For audio_policy_volumes_C10_Update.xml:
- Revision for low volume to be compatible with the speaker-safe
preset mentioned above.
- Revision of full volume curve to be compatible with MIX3500M preset
for below stream type DTMF, System Sound, Enforced Audible.
- sha1sum: 918ebfef1da80f8caca117cc1da00f0a7eade6c1
/vendor/etc/audio_policy_volumes.xml
For audio_policy_volumes_P10_Update_V2.xml:
- Revision for low volume to be compatible with the speaker-safe
preset mentioned above
- Revision of full volume curve to be compatible with MIX2000 preset for
below stream type DTMF, System Sound, Enforced Audible
- sha1sum: 9333ef3a4359b6c5e5b29a3beb40c677f8961c5d
/vendor/etc/audio_policy_volumes.xml
Bug: 234590302
Bug: 234464916
Test: manual test
b/234464916#comment4
b/234590302#comment8
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I9fcaa0ac6f50af7f0728eb5a686b9866317a49d8
FM table change list:
1. HE
a) Fine tune HE BB SWB FFP, BVE, NS, ECDT
b) Fine tune HE BB NB/WB/SWB RX volume curve
2. HA
1) fine-tune C10 TMOUS tuning for DVT stage
2) fine-tune P10/C10 NB robustness tuning
3) fine-tune P10/C10 NB acoustic shock for generic
3. HH
a) P10/C10 fine tune NS performance
4. AMS : P10/C10 HA/HH/HE all enable AMS.
Bug: 234676284
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I9328b8c72c9b4799634bf3d6b63db6a4102fe571
AoC can support mmap on BT both playback and recording
after gpar/322484.
Bug: 232205959
Test: Play MMAP games and OboeTester
Change-Id: Id696b578f4a2e3f94d6193e714b6d9f1ace6977a
FM table change list:
1. HE
a) Enble BVE for BB on NB,WB, SWB
b) Fine tune BB RX EQ on NB, WB.
2. HH
a) Fine Tune RX for dual speaker
b) Polishing SWB NS performance
3. HA
a) Update TMOUS tuning for P10/C10 on NB/WB/SWB
b) Fine tune C10 tuning setting for Generic on NB/WB/SWB
c) Fine tune P10 tuning setting for Generic on NB
d) Fine tune NS tuning for P10/C10 on SWB
Bug: 234079372
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: If380495da1e94fff33a2bdc9980f0e546d167e7f
- preview of notification will be cut off slightly becuase of mute
duration in framework is 160ms (40*40)
- set mute duration of primary output from 160 ms to 40 ms.
Bug: 233176336
Test: preview notification/end call sound on voice/VoIP(Line)
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I7f5225372c265cb22e74311b0805d16b1c68fd3d
Change list:
1.Set fallback value for repair center(not impact tuning)
Bug: 199029784
Test: Builds
Change-Id: Ia58aec716eb697d483a25f00e5244a3ea8ee8e70
Signed-off-by: Robert Lee <lerobert@google.com>
Change list:
1.Set fallback value for repair center(not impact tuning)
Bug: 198765357
Test: Builds
Change-Id: I9c68a737ea1854e458e3b57b47a1c227a4f4a4bd
Signed-off-by: Robert Lee <lerobert@google.com>
Refine AZ and Surround recording parameters and related IIR2 tuning
Bug: 232162570
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I2cc34f9fd106578a4e2693b5183aa8879cf70465
add mic gain on path "speaker-mic" from 0 to 22
Bug: 231909998
Test: mmap record
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I66de7c52c29ec3434a5cbed1799029fa5be05f71
- Changes
New iteration of C10 MIX 103 for DF Merge
Full volume curve is integrated with LinkLaw for stereo playback
Reduced Sharpness of speech
CTS Validated
MPS validated w/ all stream paths, concurrencies, configurations w/ Waves Console on build:
TD1A.220406.001 (8410366)
Bug: 203817007
Test: 203817007#comment13, 203817007#comment20
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ib95ccb669c8fd5369599bd530aeeb64197d18119
FM table Changelist:
1. C10 HA NB/WB/SWB: fine tuning for EVT1.1
2. C10 HA NB/WB/SWB: FFP parameter update (enable)
Bug: 216258666
Test: Acoustic team verified
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: Ia4dcb8dd19d4aaf7fa4150a3cdacb9d455994ac6
Change list:
1.Enable Top/Bot speaker FIR module on voice call
Bug: 198765357
Test: Builds
Change-Id: Ia51415f64b429cd79afaee709a8b16bc33d1edcc
Signed-off-by: Robert Lee <lerobert@google.com>
fast_swtich1.txt => Enable FIR of top amp
fast_swtich2.txt => Enable FIR of bot amp
fast_switch3.txt => Disable FIR of top amp
fast_switch4.txt => Disable FIR of bot amp
Bug: 214487028
Test: Build pass
Change-Id: Id7c9eae52d9e59250cbc7e79705d86d0268a7a79
Signed-off-by: Robert Lee <lerobert@google.com>
Changelist:
1.Enable Top/Bot speaker FIR module on voice call
Bug: 199029784
Test: Builds
Change-Id: I8e54a63830a32a4d41f257a5187d722ec199a368
Signed-off-by: Robert Lee <lerobert@google.com>
FM table Changelist:
C10P10
1. Parameter version update from 1.2.0 to 1.2.1
2. Headset BB
Disable FFP for NB/WB to avoid low RLR issue (ST solution)
3. Headset TTY Full and HCO
Set AEC_NUM_CH to be 0x0001 (Original is 0x0000) to make TX work properly.
4. BT
Disable low latency mode on BTNB-NB and BTNB_NREC-NB to avoid TX clipping/distortion issue (ST solution)
5. HHNB/WB/SWB NS parameter update for v603
6. HHNB/WB/SWB RX fune tuing for power consuming
7. Align same parameter
(1) Handsfree TX to VCO TX/ BT-HAC TX/ Headphone TX
(2) Handsfree RX to HCO RX
Bug: 216258666
Test: b/216258666#comment19
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I583bda3772be7a667aed2b0c8fb34249b3223c9e
FM table Changelist:
C10P10
1. Table form 20220309 version
2. HE disable FFP on Blackbrid NB WB
3. BT disable low latency mode on NB
Bug: 216258666
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: Ib1641bfd0c42cfcf3636c69c81f8bf5d55202199
