FM table Changelist:
C10P10
1. Parameter version update from 1.2.0 to 1.2.1
2. Headset BB
Disable FFP for NB/WB to avoid low RLR issue (ST solution)
3. Headset TTY Full and HCO
Set AEC_NUM_CH to be 0x0001 (Original is 0x0000) to make TX work properly.
4. BT
Disable low latency mode on BTNB-NB and BTNB_NREC-NB to avoid TX clipping/distortion issue (ST solution)
5. HHNB/WB/SWB NS parameter update for v603
6. HHNB/WB/SWB RX fune tuing for power consuming
7. Align same parameter
(1) Handsfree TX to VCO TX/ BT-HAC TX/ Headphone TX
(2) Handsfree RX to HCO RX
Bug: 216258666
Test: b/216258666#comment19
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I583bda3772be7a667aed2b0c8fb34249b3223c9e
FM table Changelist:
C10P10
1. Table form 20220309 version
2. HE disable FFP on Blackbrid NB WB
3. BT disable low latency mode on NB
Bug: 216258666
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: Ib1641bfd0c42cfcf3636c69c81f8bf5d55202199
If ro.bluetooth.a2dp_offload.supported == true AND persist.bluetooth.a2dp_offload.disabled == true
use audio_policy_configuration_a2dp_offload_disabled.xml (a2dp X LE X)
If ro.bluetooth.a2dp_offload.supported == true AND persist.bluetooth.a2dp_offload.disabled == false AND
(ro.bluetooth.leaudio_offload.supported == false OR persist.bluetooth.leaudio_offload.disabled == true)
use audio_policy_configuration_le_offload_disabled.xml (a2dp O LE X)
If ro.bluetooth.a2dp_offload.supported == true AND persist.bluetooth.a2dp_offload.disabled == false AND
ro.bluetooth.leaudio_offload.supported == true AND persist.bluetooth.leaudio_offload.disabled == false
use default audio_policy_configuration.xml (a2dp O LE O)
Note:
The above settings are based on ro.bluetooth.a2dp_offload.supported == true condition
If ro.bluetooth.a2dp_offload.supported == false, the content of the default audio_policy_configuration.xml
file must be replaced by audio_policy_configuration_a2dp_offload_disabled.xml on the target
Test: manual
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: I4a9bd45c1341100217ab32fd81f7421af00e059d
Revert submission 16996078-voip_speaker_separation-master-table-tm-dev
Reason for revert: <AoC is reverted by b/222138584>
Reverted Changes:
I85c654319:audio: voip downlink to stereo
Iac83ae74c:audio: iS900 table release of Fortemedia
Change-Id: Ib741e38913ab39af916f3dbb60bd08159c0d6cf2
Revert submission 16996078-voip_speaker_separation-master-table-tm-dev
Reason for revert: <AoC is reverted by b/222138584>
Reverted Changes:
I85c654319:audio: voip downlink to stereo
Iac83ae74c:audio: iS900 table release of Fortemedia
Change-Id: I5bb1d1a0ba11b130f2ff56e8babf5402a135e8f4
Change list:
1.Enable PICL model on top speaker
Bug: 199029784
Test: builds
Change-Id: I2a330b4624eef8e8cbb6ad980f6fbcd18ac9c6f7
Signed-off-by: Robert Lee <lerobert@google.com>
FM table Changelist:
1. P10/C10 Based on iS900 : HA / HH / HE tuning setting for EVT1.1
Mixer changelist:
1. P10/C10 Change PCM Gain for Handset mode
Bug: 216258666
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I5bfd1334f949540b2c87ea5b3aaed4c47eb6fb93
Change list:
1. tuned down top speaker Xmax to 0.37mm to meet reliability requirement.
Bug: 198765357
Test: builds
Change-Id: I6aa35972846805c583b45d0a0c71df99be436156
Signed-off-by: Robert Lee <lerobert@google.com>
Change list:
1. set Top speaker Tmax to 105 degC for Waves tuning
Bug: 199029784
Test: Builds
Change-Id: Ie7274f01f831a1b3e17c929472ebffe9d0f1d2a1
Merged-In: Ie7274f01f831a1b3e17c929472ebffe9d0f1d2a1
Signed-off-by: Robert Lee <lerobert@google.com>
(cherry picked from commit e6bf777674)
Change list:
1. Re-characterized speaker model on top speaker due to a design change
2. set Tmax to 105 degC for Waves tuning
Bug: 198765357
Test: builds
Change-Id: Ib1793b25c58aed5f7e4df2ff07b11f0cebf876da
Merged-In: Ib1793b25c58aed5f7e4df2ff07b11f0cebf876da
Signed-off-by: Robert Lee <lerobert@google.com>
(cherry picked from commit 52798a52d71d972415dc4964ec18591f177cc620)
Bug: 204271052
Test: voip with speaker mode
atest dual_speakers_test
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I3bb59bf5444a537230c1dc3a4f74bd68ec209f4e
Change list:
1.Update the firmware to v6.63(comment#6)
2.Re-Characterize speaker model with EVT samples.
Bug: 198765357
Test: Builds
Change-Id: I2b0462c56361b5841893118d0e45871a27783817
Signed-off-by: Robert Lee <lerobert@google.com>
Change list:
1.Update the firmware to v6.63(comment#5)
2.Update the EVT SP model-Version3
Bug: 199029784
Test: Builds
Change-Id: I9c62f761aefb7dfe172399849cfc14b4f3223cbd
Signed-off-by: Robert Lee <lerobert@google.com>
This reverts commit d5d0e9f343.
Reason for revert: <AOC FW that supports Spatial audio capture has been reverted>
Change-Id: I18286694da289215193c3e39ad71ea4a50392a69
- specific top speaker control doesn't merge becuase of pop sound issue
during turning on/off a speaker.
Bug: 207431993
Test: manual test (b/207431993#comment16)
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ieca51d1f0ca238ff0d9112e8ede9d2eaad28ce98
Enable default 96k sample rate to fix the noise issue when enabling
96k speaker protection with 48k sample rate setting.
Bug: 206060532
Test: audio normal after device boot with speaker protection enabled
Change-Id: I28e58731b49b18ee14b9a1195c549e71a231d0ee
Signed-off-by: Robert Lee <lerobert@google.com>
