High throttling was observed on BIG cores resulting in device
sluggishness when the skin temperature hit LIGHT severity.
Current Tj control temp is set to 75 degC when LIGHT severity
is set for A0 based devices. This change is to increase the
Tj control temperature to 80 degC, same as B0 soc.
Bug: 229682004
Test: Build and boot on device. Check Tj control temperature
setting at LIGHT severity
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I67219937f89a9edec6fcf6083f4814d29ef600f2
Bug: 229727068
Test: Manual. Flash the device with the binary including this change and check adb logs. ERR_AUTO_PROVISIONING_DISABLED should not be printed.
Change-Id: I826f86c9943573d25ffeb1ac9761a29c03bf4cc9
This patch change owner of Bluetooth Timesync node to be Bluetooth to
allow Bluetooth HAL to read controller timestamp data via this node.
Bug: 226659256
Test: make
Change-Id: I70010daf45186235a48633355b5641b38597b2d6
Add a virtual sensor for USBC overheat protection and messaging to
UI. Bind overheat protection sensor with USBC cooling device.
Bug: 222577017
Test: Build and boot on device
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I6f3cdc01fedfd152382a2d5370e22e0acf6cb3ba
Bring back old usage of status_bar_height, status_bar_height_portrait,
and status_bar_height_landscape by set the size containing cutout size.
Bug: 216782082
Test: make
Change-Id: Iff388639497a7955e363c3372d79ead35831bea5
Bug: 228808192
Test: Local test to verify no polling
Signed-off-by: George Lee <geolee@google.com>
Change-Id: I6a0a0fa240e199a3ccf47138b3204679fd3f6eed
This property prevents display high brightness mode from being triggered
due to HDR layers produced by camera.
Bug: 218728138
Change-Id: I772d6c73e877661a2296a448725e9a0ca247ed07
Change list:
1.Enable Top/Bot speaker FIR module on voice call
Bug: 198765357
Test: Builds
Change-Id: Ia51415f64b429cd79afaee709a8b16bc33d1edcc
Signed-off-by: Robert Lee <lerobert@google.com>
fast_swtich1.txt => Enable FIR of top amp
fast_swtich2.txt => Enable FIR of bot amp
fast_switch3.txt => Disable FIR of top amp
fast_switch4.txt => Disable FIR of bot amp
Bug: 214487028
Test: Build pass
Change-Id: Id7c9eae52d9e59250cbc7e79705d86d0268a7a79
Signed-off-by: Robert Lee <lerobert@google.com>
Changelist:
1.Enable Top/Bot speaker FIR module on voice call
Bug: 199029784
Test: Builds
Change-Id: I8e54a63830a32a4d41f257a5187d722ec199a368
Signed-off-by: Robert Lee <lerobert@google.com>
paths are changed when we enable parallel module loading and
reorder the initializtaion of devices.
Test: without avc denial on P10 when booting
Bug: 227541760
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: Ia94bccdf479262e96210c2eda4794c2708e56861
Modified the outdoor range mapping in
the outdoor auto-brightness curve.
Bug: 213251504
Test: check the default curve
Change-Id: I387e87f343ffe7af72fb965f2c7ea05eb85dfda1
FM table Changelist:
C10P10
1. Parameter version update from 1.2.0 to 1.2.1
2. Headset BB
Disable FFP for NB/WB to avoid low RLR issue (ST solution)
3. Headset TTY Full and HCO
Set AEC_NUM_CH to be 0x0001 (Original is 0x0000) to make TX work properly.
4. BT
Disable low latency mode on BTNB-NB and BTNB_NREC-NB to avoid TX clipping/distortion issue (ST solution)
5. HHNB/WB/SWB NS parameter update for v603
6. HHNB/WB/SWB RX fune tuing for power consuming
7. Align same parameter
(1) Handsfree TX to VCO TX/ BT-HAC TX/ Headphone TX
(2) Handsfree RX to HCO RX
Bug: 216258666
Test: b/216258666#comment19
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I583bda3772be7a667aed2b0c8fb34249b3223c9e
Modify name from sysfs_vendor_sched to proc_vendor_sched
Test: without avc denial
Bug: 216207007
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: Ie8fdb9e6634fb160f5cea64883bead93be13d93e
Add touch module into the init.insmod.xxx.cfg, it will be loaded after
all common modules in late-init. So the touch module won't be loaded in
off-mode-charge.
Bug: 227269826
Bug: 226881266
Test: Verify pass that the touch module is not loaded in off-mode-charge.
Change-Id: I3f3153afb75355020e17534838410050f20f02b2
FM table Changelist:
C10P10
1. Table form 20220309 version
2. HE disable FFP on Blackbrid NB WB
3. BT disable low latency mode on NB
Bug: 216258666
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: Ib1641bfd0c42cfcf3636c69c81f8bf5d55202199
