# Cheetah/Panther specific init.rc

on init
    # NFC streset tool name
    setprop persist.vendor.nfc.streset libstreset21
    setprop persist.vendor.se.streset libstreset21

on init && property:ro.vendor.factory=1
    import /vendor/etc/init/hw/init.factory.rc

on early-boot
    # Wait for insmod_sh to finish all common modules
    wait_for_prop vendor.common.modules.ready 1
    start insmod_sh_pantah

service insmod_sh_pantah /vendor/bin/init.insmod.sh /vendor/etc/init.insmod.${ro.hardware}.cfg
    class main
    user root
    group root system
    disabled
    oneshot

on property:vendor.mfgapi.touchpanel.permission=1
    chmod 0600 /sys/devices/virtual/sec/tsp/cmd
    chown system system /sys/devices/virtual/sec/tsp/cmd

# Fingerprint
on post-fs-data
    chown system system /dev/goodix_fp
    exec_background - system shell -- /vendor/bin/trusty_apploader /vendor/firmware/g7.app

# Overrides fingerprint antispoof if following persist sysprops are set
on boot && property:ro.build.type=userdebug && \
           property:persist.vendor.fingerprint.disable.fake.override=0
    setprop vendor.fingerprint.disable.fake ${persist.vendor.fingerprint.disable.fake.override}

on boot && property:ro.build.type=userdebug && \
           property:persist.vendor.fingerprint.disable.fake.override=1
    setprop vendor.fingerprint.disable.fake ${persist.vendor.fingerprint.disable.fake.override}

on boot && property:ro.build.type=userdebug && \
           property:persist.vendor.fingerprint.disable.fake.override=100
    setprop vendor.fingerprint.disable.fake ${persist.vendor.fingerprint.disable.fake.override}

# WiFi
on post-fs-data
    setprop wifi.direct.interface p2p-dev-wlan0
    setprop wifi.aware.interface aware_nmi0

    # Speaker amp permission
    chmod 644 /mnt/vendor/persist/audio/speaker.cal

    # Allow secure_element group to read / write ST33 SPI state
    chown secure_element secure_element  /sys/class/st33spi/st33spi/st33spi_state
    chmod 0660  /sys/class/st33spi/st33spi/st33spi_state

# Persist
on post-fs-data
    chmod 770 /mnt/vendor/persist/display/hdr_cal_v1
    chmod 770 /mnt/vendor/persist/display/hdr_cal_v2
    chmod 770 /mnt/vendor/persist/display/sdr_cal_v1
    chmod 770 /mnt/vendor/persist/display/sdr_cal_v2
    chown system system /mnt/vendor/persist/sensors/registry/vd6282_spectral_fac_cal.reg
    chmod 600 /mnt/vendor/persist/sensors/registry/vd6282_spectral_fac_cal.reg

# NFC
on property:ro.boot.hardware.revision=PROTO1.0
    setprop persist.vendor.nfc.config_file_name libnfc-hal-st-proto1.conf

on property:ro.boot.hardware.revision=PROTO1.1
    setprop persist.vendor.nfc.config_file_name libnfc-hal-st-proto1.conf

# Bluetooth
on post-fs-data
    chown bluetooth system /proc/bluetooth/timesync

# SecureElement eSE2 cts mode
on property:persist.vendor.se.ese2.mode=ctsmode
    write /sys/class/st33spi/st33spi/st33spi_state 33

on init && property:ro.boot.hw.soc.rev=0
    setprop vendor.powerhal.config powerhint-a0.json

on property:ro.boot.hardware.revision=PROTO1.0
    setprop vendor.thermal.config "thermal_info_config_proto.json"

on property:ro.boot.hardware.revision=PROTO1.1
    setprop vendor.thermal.config "thermal_info_config_proto.json"

# Touch
on property:vendor.device.modules.ready=1
    chown system system /proc/focaltech_touch/Channel_Num
    chown system system /proc/focaltech_touch/FW_Version
    chown system system /proc/focaltech_touch/INT_PIN
    chown system system /proc/focaltech_touch/force_active
    chown system system /proc/focaltech_touch/Reset_Pin
    chown system system /proc/focaltech_touch/fw_grip
    chown system system /proc/focaltech_touch/fw_palm
    chown system system /proc/focaltech_touch/heatmap_onoff
    chown system system /proc/focaltech_touch/mf_mode
    chown system system /proc/focaltech_touch/selftest/Baseline
    chown system system /proc/focaltech_touch/selftest/Noise
    chown system system /proc/focaltech_touch/selftest/Panel_Differ
    chown system system /proc/focaltech_touch/selftest/Rawdata
    chown system system /proc/focaltech_touch/selftest/Rawdata_Uniformity
    chown system system /proc/focaltech_touch/selftest/Scap_CB
    chown system system /proc/focaltech_touch/selftest/Scap_Rawdata
    chown system system /proc/focaltech_touch/selftest/Short
    chown system system /proc/focaltech_touch/selftest/Strength

# Override SF and RE uclamps to 0 on boot after being set elsewhere, for adpf cpu hints
on property:sys.boot_completed=1
    trigger override-sf-uclamp

on override-sf-uclamp
    write /proc/vendor_sched/rt_uclamp_min 0
    write /proc/vendor_sched/sf_uclamp_min 0