Evolution-X-Tensor/device_google_pantah
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
device_google_pantah/device-cheetah.mk
AnierinB e4d057221e pantah: Initialize for Evolution X 11.x 
Signed-off-by: AnierinB <anierin@evolution-x.org>

panthah: Fix status bar padding
Signed-off-by: AnierinB <anierin@evolution-x.org>
2025-07-24 05:19:08 +00:00

423 lines
17 KiB
Makefile
Raw Permalink Blame History

#
# Copyright (C) 2021 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
ifdef RELEASE_GOOGLE_CHEETAH_RADIO_DIR
RELEASE_GOOGLE_PRODUCT_RADIO_DIR := $(RELEASE_GOOGLE_CHEETAH_RADIO_DIR)
endif
RELEASE_GOOGLE_BOOTLOADER_CHEETAH_DIR ?= pdk# Keep this for pdk TODO: b/327119000
RELEASE_GOOGLE_PRODUCT_BOOTLOADER_DIR := bootloader/$(RELEASE_GOOGLE_BOOTLOADER_CHEETAH_DIR)
$(call soong_config_set,pantah_bootloader,prebuilt_dir,$(RELEASE_GOOGLE_BOOTLOADER_CHEETAH_DIR))
ifneq ($(filter trunk%, $(RELEASE_GOOGLE_BOOTLOADER_CHEETAH_DIR)),)
$(call soong_config_set,pantah_fingerprint,prebuilt_dir,trunk)
else
$(call soong_config_set,pantah_fingerprint,prebuilt_dir,$(RELEASE_GOOGLE_BOOTLOADER_CHEETAH_DIR))
endif
TARGET_LINUX_KERNEL_VERSION := $(RELEASE_KERNEL_CHEETAH_VERSION)
TARGET_KERNEL_DIR := device/google/pantah-kernels/evolution
TARGET_BOARD_KERNEL_HEADERS := $(TARGET_KERNEL_DIR)/kernel-headers
$(call inherit-product, device/google/pantah/uwb/uwb_calibration_country.mk)
DEVICE_PACKAGE_OVERLAYS += device/google/pantah/cheetah/overlay
include device/google/pantah/audio/cheetah/audio-tables.mk
include device/google/gs201/device-shipping-common.mk
include device/google/gs-common/bcmbt/bluetooth.mk
include device/google/gs-common/touch/syna/syna0.mk
include device/google/pantah/uwb/uwb_calibration.mk
# go/lyric-soong-variables
$(call soong_config_set,lyric,camera_hardware,cheetah)
$(call soong_config_set,lyric,tuning_product,cheetah)
$(call soong_config_set,google3a_config,target_device,cheetah)
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.support_kernel_idle_timer=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.ignore_hdr_camera_layers=true
# Init files
PRODUCT_COPY_FILES += \
device/google/pantah/conf/init.pantah.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.pantah.rc \
device/google/pantah/conf/init.cheetah.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.cheetah.rc
# Recovery files
PRODUCT_COPY_FILES += \
device/google/pantah/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.cheetah.rc
# MIPI Coex Configs
PRODUCT_COPY_FILES += \
device/google/pantah/cheetah/radio/cheetah_display_primary_osc_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/display_primary_osc_coex_table.csv \
device/google/pantah/cheetah/radio/cheetah_camera_rear_tele_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_rear_tele_mipi_coex_table.csv \
device/google/pantah/cheetah/radio/cheetah_camera_front_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_front_mipi_coex_table.csv \
device/google/pantah/cheetah/radio/cheetah_camera_front_dbr_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_front_dbr_coex_table.csv
# Camera
PRODUCT_COPY_FILES += \
device/google/pantah/media_profiles_cheetah.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml
# Media Performance Class 13
PRODUCT_PROPERTY_OVERRIDES += ro.odm.build.media_performance_class=33
# Display Config
PRODUCT_COPY_FILES += \
device/google/pantah/cheetah/display_colordata_dev_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_dev_cal0.pb \
device/google/pantah/cheetah/display_colordata_boe-nt37290_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_boe-nt37290_cal0.pb \
device/google/pantah/cheetah/display_colordata_sdc-s6e3hc3-c10_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_sdc-s6e3hc3-c10_cal0.pb \
device/google/pantah/cheetah/display_colordata_sdc-s6e3hc4_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_sdc-s6e3hc4_cal0.pb \
device/google/pantah/cheetah/display_golden_boe-nt37290_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_boe-nt37290_cal0.pb \
device/google/pantah/cheetah/display_golden_sdc-s6e3hc4_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_sdc-s6e3hc4_cal0.pb
# Display LBE
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.lbe.supported=1
# config of display brightness dimming
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.0.brightness.dimming.usage=1
# config of primary display frames to reach LHBM peak brightness
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.primarydisplay.lhbm.frames_to_reach_peak_brightness=2
# Display RRS default Config
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += persist.vendor.display.primary.boot_config=1080x2340@120
# TODO: b/250788756 - the property will be phased out after HWC loads user-preferred mode
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.preferred_mode=1080x2340@120
# NFC
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
device/google/pantah/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
device/google/pantah/nfc/libnfc-hal-st-proto1.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st-proto1.conf \
device/google/pantah/nfc/libnfc-nci-cheetah.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf
PRODUCT_PACKAGES += \
$(RELEASE_PACKAGE_NFC_STACK) \
Tag \
android.hardware.nfc-service.st \
NfcOverlayCheetah
# Shared Modem Platform
SHARED_MODEM_PLATFORM_VENDOR := lassen
# Shared Modem Platform
include device/google/gs-common/modem/modem_svc_sit/shared_modem_platform.mk
# SecureElement
PRODUCT_PACKAGES += \
android.hardware.secure_element@1.2-service-gto \
android.hardware.secure_element@1.2-service-gto-ese2
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \
device/google/pantah/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf \
device/google/pantah/nfc/libse-gto-hal2.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal2.conf
DEVICE_MANIFEST_FILE += \
device/google/pantah/nfc/manifest_se.xml
# Thermal Config
PRODUCT_COPY_FILES += \
device/google/pantah/thermal_info_config_cheetah.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json \
device/google/pantah/thermal_info_config_charge_cheetah.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_charge.json \
device/google/pantah/thermal_info_config_proto.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_proto.json
# Power HAL config
PRODUCT_COPY_FILES += \
device/google/pantah/powerhint-cheetah.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json
PRODUCT_COPY_FILES += \
device/google/pantah/powerhint-cheetah-a0.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint-a0.json
# Bluetooth HAL
PRODUCT_COPY_FILES += \
device/google/pantah/bluetooth/bt_vendor_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth/bt_vendor_overlay.conf
PRODUCT_PROPERTY_OVERRIDES += \
ro.bluetooth.a2dp_offload.supported=true \
persist.bluetooth.a2dp_offload.disabled=false \
persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac-opus
# Enable Bluetooth AutoOn feature
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.server.automatic_turn_on=true
# Bluetooth OPUS codec
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.opus.enabled=true
# Bluetooth Tx power caps
PRODUCT_COPY_FILES += \
device/google/pantah/bluetooth/bluetooth_power_limits_cheetah.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits.csv \
device/google/pantah/bluetooth/bluetooth_power_limits_cheetah_GFE4J_JP.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GFE4J_JP.csv \
device/google/pantah/bluetooth/bluetooth_power_limits_cheetah_GP4BC_CA.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GP4BC_CA.csv \
device/google/pantah/bluetooth/bluetooth_power_limits_cheetah_GE2AE_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GE2AE_EU.csv \
device/google/pantah/bluetooth/bluetooth_power_limits_cheetah_GP4BC_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GP4BC_EU.csv \
device/google/pantah/bluetooth/bluetooth_power_limits_cheetah_GE2AE_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GE2AE_US.csv \
device/google/pantah/bluetooth/bluetooth_power_limits_cheetah_GP4BC_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GP4BC_US.csv
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.firmware.selection=BCM.hcd
# Bluetooth AAC VBR
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.a2dp_aac.vbr_supported=true
# Override BQR mask to enable LE Audio Choppy report, remove BTRT logging
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.bqr.event_mask=295006 \
persist.bluetooth.bqr.vnd_quality_mask=16 \
persist.bluetooth.bqr.vnd_trace_mask=0 \
persist.bluetooth.vendor.btsnoop=false
# Bluetooth LE Audio
PRODUCT_PRODUCT_PROPERTIES += \
ro.bluetooth.leaudio_offload.supported=true \
persist.bluetooth.leaudio_offload.disabled=false \
ro.bluetooth.leaudio_switcher.supported=true \
bluetooth.profile.bap.unicast.client.enabled?=true \
bluetooth.profile.csip.set_coordinator.enabled?=true \
bluetooth.profile.hap.client.enabled?=true \
bluetooth.profile.mcp.server.enabled?=true \
bluetooth.profile.ccp.server.enabled?=true \
bluetooth.profile.vcp.controller.enabled?=true \
# Bluetooth LE Audio CIS handover to SCO
# Set the property only if the controller doesn't support CIS and SCO
# simultaneously. More details in b/242908683.
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.leaudio.notify.idle.during.call=true
# BT controller not able to support LE Audio dual mic SWB call
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.leaudio.dual_bidirection_swb.supported=false
# LE Auido Offload Capabilities setting
PRODUCT_COPY_FILES += \
device/google/pantah/bluetooth/le_audio_codec_capabilities.xml:$(TARGET_COPY_OUT_VENDOR)/etc/le_audio_codec_capabilities.xml
# LE Audio Unicast Allowlist
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.leaudio.allow_list=SM-R510,WF-1000XM5,SM-R630
# Disable Bluetooth HAP by default
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.profile.hap.enabled_by_default=false
# Disable Bluetooth LE Audio toggle for ASHA device
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.leaudio.toggle_visible_for_asha=false
# Support LE & Classic concurrent encryption (b/330704060)
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.ble.allow_enc_with_bredr=true
# default BDADDR for EVB only
PRODUCT_PROPERTY_OVERRIDES += \
ro.vendor.bluetooth.evb_bdaddr="22:22:22:33:44:55"
# Spatial Audio
PRODUCT_PACKAGES += \
libspatialaudio
# declare use of spatial audio
PRODUCT_PROPERTY_OVERRIDES += \
ro.audio.spatializer_enabled=true
# optimize spatializer effect
PRODUCT_PROPERTY_OVERRIDES += \
audio.spatializer.effect.util_clamp_min=300
# Keymaster HAL
#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service
# Gatekeeper HAL
#LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= android.hardware.gatekeeper@1.0-service.software
# Gatekeeper
# PRODUCT_PACKAGES += \
# android.hardware.gatekeeper@1.0-service.software
# Keymint replaces Keymaster
# PRODUCT_PACKAGES += \
# android.hardware.security.keymint-service
# Keymaster
#PRODUCT_PACKAGES += \
# android.hardware.keymaster@4.0-impl \
# android.hardware.keymaster@4.0-service
#PRODUCT_PACKAGES += android.hardware.keymaster@4.0-service.remote
#PRODUCT_PACKAGES += android.hardware.keymaster@4.1-service.remote
#LOCAL_KEYMASTER_PRODUCT_PACKAGE := android.hardware.keymaster@4.1-service
#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service
# PRODUCT_PROPERTY_OVERRIDES += \
# ro.hardware.keystore_desede=true \
# ro.hardware.keystore=software \
# ro.hardware.gatekeeper=software
# PowerStats HAL
PRODUCT_SOONG_NAMESPACES += \
device/google/pantah/powerstats/cheetah \
device/google/pantah
PRODUCT_PACKAGES += \
UwbOverlayC10 \
WifiOverlay2022_C10
PRODUCT_SOONG_NAMESPACES += device/google/pantah/cheetah/
# Location
PRODUCT_COPY_FILES += \
device/google/pantah/location/lhd_user.conf.c10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
device/google/pantah/location/scd_user.conf.c10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
ifneq (,$(filter 6.1, $(TARGET_LINUX_KERNEL_VERSION)))
PRODUCT_COPY_FILES += \
device/google/pantah/location/gps_user.6.1.xml.c10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
else
PRODUCT_COPY_FILES += \
device/google/pantah/location/gps_user.xml.c10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
endif
# Set support one-handed mode
PRODUCT_PRODUCT_PROPERTIES += \
ro.support_one_handed_mode=true
# Set zram size
PRODUCT_VENDOR_PROPERTIES += \
vendor.zram.size=3g
# Increment the SVN for any official public releases
ifdef RELEASE_SVN_CHEETAH
TARGET_SVN ?= $(RELEASE_SVN_CHEETAH)
else
# Set this for older releases that don't use build flag
TARGET_SVN ?= 61
endif
PRODUCT_VENDOR_PROPERTIES += \
ro.vendor.build.svn=$(TARGET_SVN)
# Set device family property for SMR
PRODUCT_PROPERTY_OVERRIDES += \
ro.build.device_family=P10C10L10
# Set build properties for SMR builds
ifeq ($(RELEASE_IS_SMR), true)
ifneq (,$(RELEASE_BASE_OS_CHEETAH))
PRODUCT_BASE_OS := $(RELEASE_BASE_OS_CHEETAH)
endif
endif
# Set build properties for EMR builds
ifeq ($(RELEASE_IS_EMR), true)
ifneq (,$(RELEASE_BASE_OS_CHEETAH))
PRODUCT_PROPERTY_OVERRIDES += \
ro.build.version.emergency_base_os=$(RELEASE_BASE_OS_CHEETAH)
endif
endif
# DCK properties based on target
PRODUCT_PROPERTY_OVERRIDES += \
ro.gms.dck.eligible_wcc=3 \
ro.gms.dck.se_capability=1
# Set support hide display cutout feature
PRODUCT_PRODUCT_PROPERTIES += \
ro.support_hide_display_cutout=true
PRODUCT_PACKAGES += \
NoCutoutOverlay \
AvoidAppsInCutoutOverlay
# SKU specific RROs
PRODUCT_PACKAGES += \
SettingsOverlayGFE4J \
SettingsOverlayGE2AE \
SettingsOverlayGP4BC
# Fingerprint HAL
PRODUCT_VENDOR_PROPERTIES += \
persist.vendor.udfps.als_feed_forward_supported=true \
persist.vendor.udfps.lhbm_controlled_in_hal_supported=true
# Vibrator HAL
$(call soong_config_set,haptics,kernel_ver,v$(subst .,_,$(TARGET_LINUX_KERNEL_VERSION)))
ACTUATOR_MODEL := luxshare_ict_081545
ADAPTIVE_HAPTICS_FEATURE := adaptive_haptics_v1
PRODUCT_VENDOR_PROPERTIES += \
persist.vendor.vibrator.hal.chirp.enabled=0 \
ro.vendor.vibrator.hal.device.mass=0.214 \
ro.vendor.vibrator.hal.loc.coeff=2.7 \
persist.vendor.vibrator.hal.context.enable=false \
persist.vendor.vibrator.hal.context.scale=60 \
persist.vendor.vibrator.hal.context.fade=true \
persist.vendor.vibrator.hal.context.cooldowntime=1600 \
persist.vendor.vibrator.hal.context.settlingtime=5000
# Override Output Distortion Gain
PRODUCT_VENDOR_PROPERTIES += \
vendor.audio.hapticgenerator.distortion.output.gain=0.38
# Keyboard bottom and side padding in dp for portrait mode and height ratio
PRODUCT_PRODUCT_PROPERTIES += \
ro.com.google.ime.kb_pad_port_b=8 \
ro.com.google.ime.kb_pad_port_l=11 \
ro.com.google.ime.kb_pad_port_r=11 \
ro.com.google.ime.height_ratio=1.025
# Enable camera exif model/make reporting
PRODUCT_VENDOR_PROPERTIES += \
persist.vendor.camera.exif_reveal_make_model=true \
persist.vendor.camera.front_720P_always_binning=true
# RKPD
PRODUCT_PRODUCT_PROPERTIES += \
remote_provisioning.hostname=remoteprovisioning.googleapis.com \
##Audio Vendor property
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.audio.cca.enabled=false
# The default value of this variable is false and should only be set to true when
# the device allows users to enable the seamless transfer feature.
PRODUCT_PRODUCT_PROPERTIES += \
euicc.seamless_transfer_enabled_in_non_qs=true
# Device features
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml
# Disable Settings large-screen optimization enabled by Window Extensions
PRODUCT_SYSTEM_PROPERTIES += \
persist.settings.large_screen_opt.enabled=false
# Enable DeviceAsWebcam support
PRODUCT_VENDOR_PROPERTIES += \
ro.usb.uvc.enabled=true
# Quick Start device-specific settings
PRODUCT_PRODUCT_PROPERTIES += \
ro.quick_start.oem_id=00e0 \
ro.quick_start.device_id=cheetah
# Bluetooth device id
# Cheetah: 0x410A
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.device_id.product_id=16650
Reference in a new issue View git blame Copy permalink