Evolution-X-Tensor/device_google_pantah
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
device_google_pantah/device-ravenclaw.mk
Sayanna Chandula 1f98950323 thermal: enable thermal engine for evt1.0 devices 
New version of thermal engine (Powerlink v2) uses ODPM data for
thermal mitigation. But proto devices does not support ODPM.
Currently we have disabled thermal mitigation for all A0 based
devices through a separate config, thermal_info_config_A0.json.
This change restricts using separate thermal config  only for the
proto devices and uses thermal_info_config.json for the rest.
Fix a format issue with qi-quiet sensor definition.

Bug: 196478280
Test: Build and boot on device. Check thermal config
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Change-Id: I0922e935cafe118f3437335e2a72b87aae6f6009
2022-04-25 18:20:58 +00:00

177 lines
6.9 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2021 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
TARGET_KERNEL_DIR ?= device/google/pantah-kernel
TARGET_BOARD_KERNEL_HEADERS := device/google/pantah-kernel/kernel-headers
$(call inherit-product-if-exists, vendor/google_devices/pantah/prebuilts/device-vendor-ravenclaw.mk)
$(call inherit-product-if-exists, vendor/google_devices/gs201/prebuilts/device-vendor.mk)
$(call inherit-product-if-exists, vendor/google_devices/gs201/proprietary/device-vendor.mk)
$(call inherit-product-if-exists, vendor/google_devices/pantah/proprietary/ravenclaw/device-vendor-ravenclaw.mk)
include device/google/gs201/device-shipping-common.mk
include device/google/pantah/audio/ravenclaw/audio-tables.mk
include hardware/google/pixel/vibrator/cs40l26/device.mk
include device/google/gs101/bluetooth/bluetooth.mk
ifeq ($(filter factory_ravenclaw, $(TARGET_PRODUCT)),)
include device/google/gs101/uwb/uwb.mk
include device/google/pantah/uwb/uwb_calibration.mk
endif
$(call soong_config_set,lyric,tuning_product,cloudripper)
$(call soong_config_set,google3a_config,target_device,cloudripper)
# Init files
PRODUCT_COPY_FILES += \
device/google/pantah/conf/init.ravenclaw.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.ravenclaw.rc
# Recovery files
PRODUCT_COPY_FILES += \
device/google/pantah/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.ravenclaw.rc
# insmod files
PRODUCT_COPY_FILES += \
device/google/pantah/init.insmod.ravenclaw.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.ravenclaw.cfg
# Camera
PRODUCT_COPY_FILES += \
device/google/pantah/media_profiles_ravenclaw.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml
# NFC
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
frameworks/native/data/etc/android.hardware.nfc.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.uicc.xml \
frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
device/google/pantah/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
device/google/pantah/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf
PRODUCT_PACKAGES += \
NfcNci \
Tag \
android.hardware.nfc@1.2-service.st
# SecureElement
PRODUCT_PACKAGES += \
android.hardware.secure_element@1.2-service-gto \
android.hardware.secure_element@1.2-service-gto-ese2
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \
device/google/pantah/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf \
device/google/pantah/nfc/libse-gto-hal2.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal2.conf
DEVICE_MANIFEST_FILE += \
device/google/pantah/nfc/manifest_nfc.xml \
device/google/pantah/nfc/manifest_se.xml
# Thermal Config
PRODUCT_COPY_FILES += \
device/google/pantah/thermal_info_config_ravenclaw.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json \
device/google/pantah/thermal_info_config_proto.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_proto.json
# Power HAL config
PRODUCT_COPY_FILES += \
device/google/pantah/powerhint-ravenclaw.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json
# Bluetooth HAL
DEVICE_MANIFEST_FILE += \
device/google/pantah/bluetooth/manifest_bluetooth.xml
PRODUCT_SOONG_NAMESPACES += \
vendor/broadcom/bluetooth
PRODUCT_PACKAGES += \
android.hardware.bluetooth@1.1-service.bcmbtlinux \
bt_vendor.conf
PRODUCT_COPY_FILES += \
device/google/pantah/bluetooth/bt_vendor_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth/bt_vendor_overlay.conf
PRODUCT_PROPERTY_OVERRIDES += \
ro.bluetooth.a2dp_offload.supported=true \
persist.bluetooth.a2dp_offload.disabled=false \
persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac
# Keymaster HAL
#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service
# Gatekeeper HAL
#LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= android.hardware.gatekeeper@1.0-service.software
# Gatekeeper
# PRODUCT_PACKAGES += \
# android.hardware.gatekeeper@1.0-service.software
# Keymint replaces Keymaster
# PRODUCT_PACKAGES += \
# android.hardware.security.keymint-service
# Keymaster
#PRODUCT_PACKAGES += \
# android.hardware.keymaster@4.0-impl \
# android.hardware.keymaster@4.0-service
#PRODUCT_PACKAGES += android.hardware.keymaster@4.0-service.remote
#PRODUCT_PACKAGES += android.hardware.keymaster@4.1-service.remote
#LOCAL_KEYMASTER_PRODUCT_PACKAGE := android.hardware.keymaster@4.1-service
#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service
# PRODUCT_PROPERTY_OVERRIDES += \
# ro.hardware.keystore_desede=true \
# ro.hardware.keystore=software \
# ro.hardware.gatekeeper=software
# default BDADDR for EVB only
PRODUCT_PROPERTY_OVERRIDES += \
ro.vendor.bluetooth.evb_bdaddr="22:22:22:33:44:55"
# PowerStats HAL
PRODUCT_SOONG_NAMESPACES += \
device/google/pantah/powerstats/ravenclaw
# Fingerprint HAL
GOODIX_CONFIG_BUILD_VERSION := g6_trusty
include device/google/gs101/fingerprint/udfps_common.mk
ifeq ($(filter factory%, $(TARGET_PRODUCT)),)
include device/google/gs101/fingerprint/udfps_shipping.mk
else
include device/google/gs101/fingerprint/udfps_factory.mk
endif
# WiFi Overlay
PRODUCT_PACKAGES += \
WifiOverlay2022_C10 \
PixelWifiOverlay2022_C10
PRODUCT_SOONG_NAMESPACES += device/google/pantah/cheetah/
# Trusty liboemcrypto.so
PRODUCT_SOONG_NAMESPACES += vendor/google_devices/pantah/prebuilts
# Location
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_COPY_FILES += \
device/google/pantah/location/gps.xml:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
else
PRODUCT_COPY_FILES += \
device/google/pantah/location/gps_user.xml:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
endif
# Set zram size
PRODUCT_VENDOR_PROPERTIES += \
vendor.zram.size=3g
Reference in a new issue View git blame Copy permalink