diff --git a/audio/raven/cs35l41/fw/R-cs35l41-dsp1-spk-prot.bin b/audio/raven/cs35l41/fw/R-cs35l41-dsp1-spk-prot.bin index 20a3ca3..81154a1 100644 Binary files a/audio/raven/cs35l41/fw/R-cs35l41-dsp1-spk-prot.bin and b/audio/raven/cs35l41/fw/R-cs35l41-dsp1-spk-prot.bin differ diff --git a/audio/raven/cs35l41/fw/cs35l41-dsp1-spk-prot.bin b/audio/raven/cs35l41/fw/cs35l41-dsp1-spk-prot.bin index 0e725b4..a2e0cd6 100644 Binary files a/audio/raven/cs35l41/fw/cs35l41-dsp1-spk-prot.bin and b/audio/raven/cs35l41/fw/cs35l41-dsp1-spk-prot.bin differ diff --git a/audio/raven/cs35l41/fw/readme.md b/audio/raven/cs35l41/fw/readme.md index 125daf9..cda3a13 100644 --- a/audio/raven/cs35l41/fw/readme.md +++ b/audio/raven/cs35l41/fw/readme.md @@ -1,8 +1,8 @@ -# R4 Protect Tune - Top And Bottom Speakers Build 21.4.0 +# R4 Protect Tune - Top And Bottom Speakers Build 21.6.0 ## Tune Details -- **File name**: r4_21.4.0 +- **File name**: r4_21.6.0 - _Device_: CS35L41 revB2 - _Firmware Version_ - _Protect_: Playback 6.47.0 @@ -16,11 +16,42 @@ ### Changelog -#### 21.2.4.0 +#### 21.6.0 + +- Top Speaker protect tune 21.5.0 → 21.6.0 + - Recharacterized and retuned to include new limit samples + - Wael retuned XMAX gain to -24.3 (from -24.5) for slightly safer XMAX + +#### 21.5.1 + +- Bottom speaker protect tune uprev 21.5.0 → 21.5.1 + - Recharacterized and retuned to include new limit samples +- All top speaker tunes remain the same as in 21.5.0 + +#### 21.5.0 + +- Updated 21.4.0_withWaelTuning with redc fallback values per customer request. + - **Top**: 5.402 ohms + - **Bottom**: 5.445 ohms +- This change in in the protect bins only. Cal and CalAndDiag bins remain the same as in 21.2.4.0_withWaelTuning + +#### 21.4.0_withWaelTuning + +Updated Top Tuning xmax parameters by Wael +No changes to bottom + +#### 21.4.0 Retune using R4 EVT samples. Firmware moved to 6.47.0 for protect, calibration, and diagnostics signal chains. +Changes in firmware between 6.45.0 and 6.47.0: + +- Implemented a timeout feature that allows a maximum delay between the start of the BCLK and the start of the LRCLK. + If the timeout is exceeded, an error notification is sent to the driver and the command is ignored. This addresses a + host-side timing issue for these signals that could lead to a no-audio situation. +- Fixed an issue where repeated pause/resume commands could cause pops on the output. + #### 21.2.3_ENG Based on 21.2.2_ENG with HPF cutoff frequencies set to 150Hz for both top and bottom protect tunes @@ -53,41 +84,35 @@ Based on 21.2.2_ENG with HPF cutoff frequencies set to 150Hz for both top and bo **Protect, Calibration, and Diag bins with R Trace** _For use in actual phone_ -- Top Speaker +- #### Top Speaker - Top\r4Top_calAndDiag_21.4.0_pb6.47.0_17.5dB_withRTrace.bin - Top\r4Top_cal_21.4.0_pb6.47.0_17.5dB_withRTrace.bin - - Top\21.4.0_100hpf\r4Top_protect_21.4.0_pb6.47.0_17.5dB_100hpf_withRTrace.bin - - Top\21.4.0_120hpf\r4Top_protect_21.4.0_pb6.47.0_17.5dB_120hpf_withRTrace.bin -- Bottom Speaker + - Top\21.6.0_100hpf\r4Top_protect_21.6.0_pb6.47.0_17.5dB_100hpf_withRTrace.bin +- #### Bottom Speaker - Bottom\r4Bottom_calAndDiag_21.4.0_pb6.47.0_17.5dB_withRTrace.bin - Bottom\r4Bottom_cal_21.4.0_pb6.47.0_17.5dB_withRTrace.bin - - Bottom\21.4.0_100hpf\r4Bottom_protect_21.4.0_pb6.47.0_17.5dB_100hpf_withRTrace.bin - - Bottom\21.4.0_120hpf\r4Bottom_protect_21.4.0_pb6.47.0_17.5dB_120hpf_withRTrace.bin + - Bottom\21.5.1_100hpf\r4Bottom_protect_21.5.1_pb6.47.0_17.5dB_100hpf_withRTrace.bin -**Protect & Calibration files without R trace** +**Protect & Calibration jsons without R trace** _For use on Lochnagar 2 development platform_ -- Top Speaker - - Top\21.4.0_100hpf\r4Top_21.4.0_pb6.47.0_17.5dB_100hpf_noRTrace.json - - Top\21.4.0_120hpf\r4Top_21.4.0_pb6.47.0_17.5dB_120hpf_noRTrace.json -- Bottom Speaker - - Bottom\21.4.0_100hpf\r4Bottom_21.4.0_pb6.47.0_17.5dB_100hpf_noRTrace.json - - Bottom\21.4.0_120hpf\r4Bottom_21.4.0_pb6.47.0_17.5dB_120hpf_noRTrace.json +- #### Top Speaker + - Top\21.6.0_100hpf\r4Top_21.6.0_pb6.47.0_17.5dB_100hpf_noRTrace.json +- #### Bottom Speaker + - Bottom\21.5.1_100hpf\r4Bottom_21.5.1_pb6.47.0_17.5dB_100hpf_noRTrace.json _JSON files contains both protect and calibration deploy groups_ **Labsuite Files** -- Top Speaker - - 21.4.0_100hpf\r4Top_21.4.0_pb6.47.0_17.5dB_100hpf_noRTrace.exported_tuning - - 21.4.0_100hpf\r4Top_21.4.0_pb6.47.0_17.5dB_100hpf_withRTrace.exported_tuning - - 21.4.0_120hpf\r4Top_21.4.0_pb6.47.0_17.5dB_120hpf_noRTrace.exported_tuning - - 21.4.0_120hpf\r4Top_21.4.0_pb6.47.0_17.5dB_120hpf_withRTrace.exported_tuning -- Bottom Speaker - - 21.4.0_100hpf\r4Bottom_21.4.0_pb6.47.0_17.5dB_100hpf_noRTrace.exported_tuning - - 21.4.0_100hpf\r4Bottom_21.4.0_pb6.47.0_17.5dB_100hpf_withRTrace.exported_tuning - - 21.4.0_120hpf\r4Bottom_21.4.0_pb6.47.0_17.5dB_120hpf_noRTrace.exported_tuning - - 21.4.0_120hpf\r4Bottom_21.4.0_pb6.47.0_17.5dB_120hpf_withRTrace.exported_tuning +- #### Top Speaker + - Top\21.6.0_100hpf\r4Top_21.6.0_pb6.47.0_17.5dB_100hpf_noRTrace.exported_tuning + - Top\21.6.0_100hpf\r4Top_21.6.0_pb6.47.0_17.5dB_100hpf_withRTrace.exported_tuning +- #### Bottom Speaker + - Bottom\21.5.1_100hpf\r4Bottom_21.5.1_pb6.47.0_17.5dB_100hpf_noRTrace.parameters + - Bottom\21.5.1_100hpf\r4Bottom_21.5.1_pb6.47.0_17.5dB_100hpf_withRTrace.parameters + - Bottom\21.5.1_100hpf\r4Bottom_protect_21.5.1_pb6.47.0_17.5dB_100hpf_noRTrace.exported_tuning + - Bottom\21.5.1_100hpf\r4Bottom_protect_21.5.1_pb6.47.0_17.5dB_100hpf_withRTrace.exported_tuning **Firmware Files** _Each firmware wmfw is in a folder respective for which type of bin file it is for_ @@ -96,6 +121,12 @@ _Each firmware wmfw is in a folder respective for which type of bin file it is f - Firmware\Diag\halo_cspl_RAM_diag_revB2_29.49.0.wmfw - Firmware\Protect\halo_cspl_RAM_revB2_29.49.0.wmfw +**Additional data** + +- r4EvtSpeakerCalAndDiagResults.xlsx +- CustomerTuneReports\R4_21.5.1_Bottom_CustomerTuneReport.pdf +- CustomerTuneReports\R4_21.6.0_Top_CustomerTuneReport.pdf + --- ## Speaker Parameters @@ -110,6 +141,7 @@ _Each firmware wmfw is in a folder respective for which type of bin file it is f | **Coil co-efficiency (Tk)** | 0.00393 | | **DC Resistance** | 6 [Ohms] | | **Resonance Frequency** | 820 [Hz] +/-7.5% | +| **ReDC Fallback** | 5.402 ohms | ### Bottom Speaker @@ -121,3 +153,4 @@ _Each firmware wmfw is in a folder respective for which type of bin file it is f | **Coil co-efficiency (Tk)** | 0.00393 | | **DC Resistance** | 6.1[Ohm] | | **Resonance Frequency** | 720 [Hz] +/- 10% [Hz] | +| **ReDC Fallback** | 5.445 ohms |