From d48ff14ae9b70676badf738da06ddbdbf04c9af5 Mon Sep 17 00:00:00 2001 From: George Chang Date: Wed, 10 Mar 2021 20:35:15 +0800 Subject: [PATCH] Update nfc configurations Bug: 182243379 Test: atest NfcNciInstrumentationTests Change-Id: I5499e1a26c21920f2945121c0a04f4c519619049 --- device-oriole.mk | 5 +- device-raven.mk | 4 +- device-slider.mk | 4 +- nfc/libnfc-hal-st-disable.conf | 152 +++++++++++++++++++++++++++++++++ nfc/libnfc-hal-st.conf | 148 ++++++++++++++++++++++++++++++++ nfc/libnfc-nci-raven.conf | 114 +++++++++++++++++++++++++ nfc/libnfc-nci.conf | 108 +++++++++++++++++++++++ 7 files changed, 532 insertions(+), 3 deletions(-) create mode 100644 nfc/libnfc-hal-st-disable.conf create mode 100644 nfc/libnfc-hal-st.conf create mode 100644 nfc/libnfc-nci-raven.conf create mode 100644 nfc/libnfc-nci.conf diff --git a/device-oriole.mk b/device-oriole.mk index 6daf9f2..4b3308a 100644 --- a/device-oriole.mk +++ b/device-oriole.mk @@ -52,7 +52,10 @@ PRODUCT_COPY_FILES += \ # NFC PRODUCT_COPY_FILES += \ - device/google/gs101/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf + device/google/raviole/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \ + device/google/raviole/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf + + DEVICE_MANIFEST_FILE += \ device/google/gs101/nfc/manifest_se_gs101.xml diff --git a/device-raven.mk b/device-raven.mk index 5f1bf36..b59211a 100644 --- a/device-raven.mk +++ b/device-raven.mk @@ -57,7 +57,9 @@ PRODUCT_COPY_FILES += \ # NFC PRODUCT_COPY_FILES += \ - device/google/gs101/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf + device/google/raviole/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \ + device/google/raviole/nfc/libnfc-nci-raven.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf + DEVICE_MANIFEST_FILE += \ device/google/gs101/nfc/manifest_se_gs101.xml diff --git a/device-slider.mk b/device-slider.mk index 4443ab4..dd76dc3 100644 --- a/device-slider.mk +++ b/device-slider.mk @@ -67,6 +67,8 @@ PRODUCT_PROPERTY_OVERRIDES += \ # NFC PRODUCT_COPY_FILES += \ - device/google/gs101/nfc/libnfc-hal-st-gs101.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf + device/google/raviole/nfc/libnfc-hal-st-disable.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \ + device/google/raviole/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf + DEVICE_MANIFEST_FILE += \ device/google/gs101/nfc/manifest_se_gs101.xml diff --git a/nfc/libnfc-hal-st-disable.conf b/nfc/libnfc-hal-st-disable.conf new file mode 100644 index 0000000..2b455df --- /dev/null +++ b/nfc/libnfc-hal-st-disable.conf @@ -0,0 +1,152 @@ +########################### Start of libnf-hal-st_aosp.conf ########################### + +############################################################################### +############################################################################### +# ST HAL trace log level +STNFC_HAL_LOGLEVEL=4 +NFC_DEBUG_ENABLED=1 + +############################################################################### +# Vendor specific mode to enable FW (RF & SWP) traces. +STNFC_FW_DEBUG_ENABLED=0 + +############################################################################### +# File used for NFA storage +NFA_STORAGE="/data/nfc" + +############################################################################### +# Dev Node used for ST HAL +ST_NFC_DEV_NODE="/dev/st_no_such_device" + +############################################################################### +# Keep the nfa storage file. +PRESERVE_STORAGE=1 + +############################################################################### +# In Switch OFF mode (phone switched-off), specify the desired CE mode to +# the controller. +# 0: No card-emulation; DEFAULT +# 1: Switch-off card-emulation enabled +CE_ON_SWITCH_OFF_STATE=1 + +############################################################################### +# Vendor specific mode to support the USB charging mode if VPSIO=1 in switch off. +STNFC_USB_CHARGING_MODE=1 + +############################################################################### +# Vendor Specific Proprietary Protocol & Discovery Configuration +# Set to 0xFF if unsupported +# byte[0] NCI_PROTOCOL_18092_ACTIVE +# byte[1] NCI_PROTOCOL_B_PRIME +# byte[2] NCI_PROTOCOL_DUAL +# byte[3] NCI_PROTOCOL_15693 +# byte[4] NCI_PROTOCOL_KOVIO +# byte[5] NCI_PROTOCOL_MIFARE +# byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO +# byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME +# byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME +NFA_PROPRIETARY_CFG={05:FF:FF:06:8A:90:77:FF:FF} + +############################################################################### +# Choose the presence-check algorithm for type-4 tag. If not defined, +# the default value is 1. +# 0 NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm +# 1 NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block +# 2 NFA_RW_PRES_CHK_RESET; Deactivate to Sleep, then re-activate +# 3 NFA_RW_PRES_CHK_RB_CH0; Type-4 tag protocol's ReadBinary command on channel 0 +# 4 NFA_RW_PRES_CHK_RB_CH3; Type-4 tag protocol's ReadBinary command on channel 3 +# 5 NFA_RW_PRES_CHK_ISO_DEP_NAK; presence check command ISO-DEP NAK as per NCI2.0 +PRESENCE_CHECK_ALGORITHM=5 + +############################################################################### +# Name of the NCI HAL module to use +# If unset, falls back to nfc_nci.bcm2079x +NCI_HAL_MODULE="nfc_nci.st21nfc" + +############################################################################### +# White list to be set at startup. +DEVICE_HOST_WHITE_LIST={02:C0} + +############################################################################### +# BAIL OUT value for P2P +# Implements algorithm for NFC-DEP protocol priority over ISO-DEP protocol. +POLL_BAIL_OUT_MODE=1 + +############################################################################### +# Extended APDU length for ISO_DEP +ISO_DEP_MAX_TRANSCEIVE=0xFEFF + +############################################################################### +# Configure the NFC Extras to open and use a static pipe. If the value is +# not set or set to 0, then the default is use a dynamic pipe based on a +# destination gate (see NFA_HCI_DEFAULT_DEST_GATE). Note there is a value +# for each EE (ESE/SIM) +OFF_HOST_ESE_PIPE_ID=0x5E +OFF_HOST_SIM_PIPE_ID=0x3E + +############################################################################### +#Set the default Felica T3T System Code OffHost route Location : +#This settings will be used when application does not set this parameter +# host 0x00 +# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE) +# UICC 0x81 (UICC_1), 0x85 (UICC_2) +DEFAULT_SYS_CODE_ROUTE=0x86 + +############################################################################### +#Set the Felica T3T System Code supported power state: +DEFAULT_SYS_CODE_PWR_STATE=0x3B + +############################################################################### +# Path and Files used for FW update binaries storage +STNFC_FW_PATH_STORAGE="/vendor/firmware" +STNFC_FW_BIN_NAME="/st54j_fw.bin" +STNFC_FW_CONF_NAME="/st54j_conf.bin" + +############################################################################### +# Default off-host route for Felica. +# This settings will be used when application does not set this parameter +# host 0x00 +# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE) +# UICC 0x81 (UICC_1), 0x85 (UICC_2) +DEFAULT_NFCF_ROUTE=0x86 + +############################################################################### +# Configure the default off-host route. +# used for technology A and B routing +# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE) +# UICC 0x81 (UICC_1), 0x85 (UICC_2) +DEFAULT_OFFHOST_ROUTE=0x81 + +############################################################################### +# Configure the default AID route. +# host 0x00 +# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE) +# UICC 0x81 (UICC_1), 0x85 (UICC_2) +DEFAULT_ROUTE=0x00 + +############################################################################### +# Configure the NFCEEIDs of offhost UICC. +# UICC 0x81 (UICC_1), 0x85 (UICC_2) +OFFHOST_ROUTE_UICC={81} + +############################################################################### +# Configure the NFCEEIDs of offhost eSEs. +# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE) +OFFHOST_ROUTE_ESE={86} + +############################################################################### +# Configure the list of NFCEE for the ISO-DEP routing. +# host 0x00 +# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE) +# UICC 0x81 (UICC_1), 0x85 (UICC_2) +DEFAULT_ISODEP_ROUTE=0x81 + +############################################################################### +# Core configuration settings +CORE_CONF_PROP={ 20, 02, 0a, 03, + a1, 01, 1e, + a2, 01, 19, + 80, 01, 01 +} + + diff --git a/nfc/libnfc-hal-st.conf b/nfc/libnfc-hal-st.conf new file mode 100644 index 0000000..47153d9 --- /dev/null +++ b/nfc/libnfc-hal-st.conf @@ -0,0 +1,148 @@ +########################### Start of libnf-hal-st_aosp.conf ########################### + +############################################################################### +############################################################################### +# ST HAL trace log level +STNFC_HAL_LOGLEVEL=1 +NFC_DEBUG_ENABLED=0 + +############################################################################### +# Vendor specific mode to enable FW (RF & SWP) traces. +STNFC_FW_DEBUG_ENABLED=0 + +############################################################################### +# File used for NFA storage +NFA_STORAGE="/data/nfc" + +############################################################################### +# Keep the nfa storage file. +PRESERVE_STORAGE=1 + +############################################################################### +# In Switch OFF mode (phone switched-off), specify the desired CE mode to +# the controller. +# 0: No card-emulation; DEFAULT +# 1: Switch-off card-emulation enabled +CE_ON_SWITCH_OFF_STATE=1 + +############################################################################### +# Vendor specific mode to support the USB charging mode if VPSIO=1 in switch off. +STNFC_USB_CHARGING_MODE=1 + +############################################################################### +# Vendor Specific Proprietary Protocol & Discovery Configuration +# Set to 0xFF if unsupported +# byte[0] NCI_PROTOCOL_18092_ACTIVE +# byte[1] NCI_PROTOCOL_B_PRIME +# byte[2] NCI_PROTOCOL_DUAL +# byte[3] NCI_PROTOCOL_15693 +# byte[4] NCI_PROTOCOL_KOVIO +# byte[5] NCI_PROTOCOL_MIFARE +# byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO +# byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME +# byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME +NFA_PROPRIETARY_CFG={05:FF:FF:06:8A:90:77:FF:FF} + +############################################################################### +# Choose the presence-check algorithm for type-4 tag. If not defined, +# the default value is 1. +# 0 NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm +# 1 NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block +# 2 NFA_RW_PRES_CHK_RESET; Deactivate to Sleep, then re-activate +# 3 NFA_RW_PRES_CHK_RB_CH0; Type-4 tag protocol's ReadBinary command on channel 0 +# 4 NFA_RW_PRES_CHK_RB_CH3; Type-4 tag protocol's ReadBinary command on channel 3 +# 5 NFA_RW_PRES_CHK_ISO_DEP_NAK; presence check command ISO-DEP NAK as per NCI2.0 +PRESENCE_CHECK_ALGORITHM=5 + +############################################################################### +# Name of the NCI HAL module to use +# If unset, falls back to nfc_nci.bcm2079x +NCI_HAL_MODULE="nfc_nci.st21nfc" + +############################################################################### +# White list to be set at startup. +DEVICE_HOST_WHITE_LIST={02:C0} + +############################################################################### +# BAIL OUT value for P2P +# Implements algorithm for NFC-DEP protocol priority over ISO-DEP protocol. +POLL_BAIL_OUT_MODE=1 + +############################################################################### +# Extended APDU length for ISO_DEP +ISO_DEP_MAX_TRANSCEIVE=0xFEFF + +############################################################################### +# Configure the NFC Extras to open and use a static pipe. If the value is +# not set or set to 0, then the default is use a dynamic pipe based on a +# destination gate (see NFA_HCI_DEFAULT_DEST_GATE). Note there is a value +# for each EE (ESE/SIM) +OFF_HOST_ESE_PIPE_ID=0x5E +OFF_HOST_SIM_PIPE_ID=0x3E + +############################################################################### +#Set the default Felica T3T System Code OffHost route Location : +#This settings will be used when application does not set this parameter +# host 0x00 +# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE) +# UICC 0x81 (UICC_1), 0x85 (UICC_2) +DEFAULT_SYS_CODE_ROUTE=0x86 + +############################################################################### +#Set the Felica T3T System Code supported power state: +DEFAULT_SYS_CODE_PWR_STATE=0x3B + +############################################################################### +# Path and Files used for FW update binaries storage +STNFC_FW_PATH_STORAGE="/vendor/firmware" +STNFC_FW_BIN_NAME="/st54j_fw.bin" +STNFC_FW_CONF_NAME="/st54j_conf.bin" + +############################################################################### +# Default off-host route for Felica. +# This settings will be used when application does not set this parameter +# host 0x00 +# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE) +# UICC 0x81 (UICC_1), 0x85 (UICC_2) +DEFAULT_NFCF_ROUTE=0x86 + +############################################################################### +# Configure the default off-host route. +# used for technology A and B routing +# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE) +# UICC 0x81 (UICC_1), 0x85 (UICC_2) +DEFAULT_OFFHOST_ROUTE=0x81 + +############################################################################### +# Configure the default AID route. +# host 0x00 +# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE) +# UICC 0x81 (UICC_1), 0x85 (UICC_2) +DEFAULT_ROUTE=0x00 + +############################################################################### +# Configure the NFCEEIDs of offhost UICC. +# UICC 0x81 (UICC_1), 0x85 (UICC_2) +OFFHOST_ROUTE_UICC={81} + +############################################################################### +# Configure the NFCEEIDs of offhost eSEs. +# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE) +OFFHOST_ROUTE_ESE={86} + +############################################################################### +# Configure the list of NFCEE for the ISO-DEP routing. +# host 0x00 +# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE) +# UICC 0x81 (UICC_1), 0x85 (UICC_2) +DEFAULT_ISODEP_ROUTE=0x81 + +############################################################################### +# Core configuration settings +CORE_CONF_PROP={ 20, 02, 0a, 03, + a1, 01, 1e, + a2, 01, 19, + 80, 01, 01 +} + + diff --git a/nfc/libnfc-nci-raven.conf b/nfc/libnfc-nci-raven.conf new file mode 100644 index 0000000..789c5eb --- /dev/null +++ b/nfc/libnfc-nci-raven.conf @@ -0,0 +1,114 @@ +############################################################################### +# Application options +NFC_DEBUG_ENABLED=0 + +############################################################################### +# File used for NFA storage +NFA_STORAGE="/data/nfc" + +############################################################################### +# Force UICC to only listen to the following technology(s). +# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. +# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F +UICC_LISTEN_TECH_MASK=0x07 + +############################################################################### +# AID for Empty Select command +# If specified, this AID will be substituted when an Empty SELECT command is +# detected. The first byte is the length of the AID. Maximum length is 16. +AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00} + +############################################################################### +# When screen is turned off, specify the desired power state of the controller. +# 0: power-off-sleep state; DEFAULT +# 1: full-power state +# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used) +SCREEN_OFF_POWER_STATE=1 + +############################################################################### +# Force tag polling for the following technology(s). +# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. +# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | +# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 | +# NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO | +# NFA_TECHNOLOGY_MASK_ACTIVE +# +# Notable bits: +# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ +# NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */ +# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ +# NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */ +# NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */ +# NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */ +POLLING_TECH_MASK=0x2F + +############################################################################### +# Force P2P to only listen for the following technology(s). +# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. +# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F | +# NFA_TECHNOLOGY_MASK_ACTIVE +# +# Notable bits: +# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ +# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ +# NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */ +P2P_LISTEN_TECH_MASK=0x00 + +PRESERVE_STORAGE=0x01 + +############################################################################### +# Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h. +# The value is set to 3 by default as it assumes we will discover 0xF2, +# 0xF3, and 0xF4. If a platform will exclude and SE, this value can be reduced +# so that the stack will not wait any longer than necessary. +# Maximum EE supported number +# NXP PN547C2 0x02 +# NXP PN65T 0x03 +# NXP PN548C2 0x02 +# NXP PN66T 0x03 +NFA_MAX_EE_SUPPORTED=0x02 + +############################################################################### +# AID_MATCHING constants +# AID_MATCHING_EXACT_ONLY 0x00 +# AID_MATCHING_EXACT_OR_PREFIX 0x01 +# AID_MATCHING_PREFIX_ONLY 0x02 +# AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03 +AID_MATCHING_MODE=0x03 + +############################################################################### +#Set the default Felica T3T System Code : +#This settings will be used when application does not set this parameter +DEFAULT_SYS_CODE={FE:FE} + +############################################################################### +# Value of NIC parameter NFCC_COFNIG_CONTROL +# 0x00 NFCC is not allowed to manage RF configuration +# 0x01 NFCC is allowed to manage RF configuration +NFCC_CONFIG_CONTROL=0x01 + +############################################################################### +#Set if the AID routing should be blocked for the power modes not supported. +NFA_AID_BLOCK_ROUTE=1 + +############################################################################### +#Set the OffHost AID supported power state: +OFFHOST_AID_ROUTE_PWR_STATE=0x3B + +############################################################################### +# Mifare Tag implementation +# 0: General implementation +# 1: Legacy implementation +LEGACY_MIFARE_READER=0 + +############################################################################### +# Nfc recovery implementation +# 0: Crash Nfc Service +# 1: Toggle Nfc state +RECOVERY_OPTION=1 + +############################################################################### +# NFCEE Power Supply and Communication Link Control Configuration +# Set when SetAlwaysOn enabled +# Default 0x00 when SetAlways on disabled +ALWAYS_ON_SET_EE_POWER_AND_LINK_CONF=0x03 diff --git a/nfc/libnfc-nci.conf b/nfc/libnfc-nci.conf new file mode 100644 index 0000000..c475161 --- /dev/null +++ b/nfc/libnfc-nci.conf @@ -0,0 +1,108 @@ +############################################################################### +# Application options +NFC_DEBUG_ENABLED=0 + +############################################################################### +# File used for NFA storage +NFA_STORAGE="/data/nfc" + +############################################################################### +# Force UICC to only listen to the following technology(s). +# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. +# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F +UICC_LISTEN_TECH_MASK=0x07 + +############################################################################### +# AID for Empty Select command +# If specified, this AID will be substituted when an Empty SELECT command is +# detected. The first byte is the length of the AID. Maximum length is 16. +AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00} + +############################################################################### +# When screen is turned off, specify the desired power state of the controller. +# 0: power-off-sleep state; DEFAULT +# 1: full-power state +# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used) +SCREEN_OFF_POWER_STATE=1 + +############################################################################### +# Force tag polling for the following technology(s). +# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. +# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | +# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 | +# NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO | +# NFA_TECHNOLOGY_MASK_ACTIVE +# +# Notable bits: +# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ +# NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */ +# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ +# NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */ +# NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */ +# NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */ +POLLING_TECH_MASK=0x2F + +############################################################################### +# Force P2P to only listen for the following technology(s). +# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. +# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F | +# NFA_TECHNOLOGY_MASK_ACTIVE +# +# Notable bits: +# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ +# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ +# NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */ +P2P_LISTEN_TECH_MASK=0x00 + +PRESERVE_STORAGE=0x01 + +############################################################################### +# Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h. +# The value is set to 3 by default as it assumes we will discover 0xF2, +# 0xF3, and 0xF4. If a platform will exclude and SE, this value can be reduced +# so that the stack will not wait any longer than necessary. +# Maximum EE supported number +# NXP PN547C2 0x02 +# NXP PN65T 0x03 +# NXP PN548C2 0x02 +# NXP PN66T 0x03 +NFA_MAX_EE_SUPPORTED=0x02 + +############################################################################### +# AID_MATCHING constants +# AID_MATCHING_EXACT_ONLY 0x00 +# AID_MATCHING_EXACT_OR_PREFIX 0x01 +# AID_MATCHING_PREFIX_ONLY 0x02 +# AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03 +AID_MATCHING_MODE=0x03 + +############################################################################### +#Set the default Felica T3T System Code : +#This settings will be used when application does not set this parameter +DEFAULT_SYS_CODE={FE:FE} + +############################################################################### +# Value of NIC parameter NFCC_COFNIG_CONTROL +# 0x00 NFCC is not allowed to manage RF configuration +# 0x01 NFCC is allowed to manage RF configuration +NFCC_CONFIG_CONTROL=0x01 + +############################################################################### +#Set if the AID routing should be blocked for the power modes not supported. +NFA_AID_BLOCK_ROUTE=1 + +############################################################################### +#Set the OffHost AID supported power state: +OFFHOST_AID_ROUTE_PWR_STATE=0x3B + +############################################################################### +# Mifare Tag implementation +# 0: General implementation +# 1: Legacy implementation +LEGACY_MIFARE_READER=0 + +############################################################################### +# Nfc recovery implementation +# 0: Crash Nfc Service +# 1: Toggle Nfc state +RECOVERY_OPTION=1