add mic gain on path "speaker-mic" from 0 to 22
Bug: 228224014
Test: audio record
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: Idafad36fdfb5c5f54e2ad3c1718b814b956ac17c
Add Audio Capture Eraser Enable to switch
Eraser for recording path.
For gain of this path, we shouldn't apply
software gain, because the input source is
from hotword pipeline.
Test: build pass
Bug: 172266161
Change-Id: Iabe372e7fe91e557ba9125af14bfb61606c09ea0
Telephony downlink ASRC should be enabled for USB. See b/173577733.
Otherwise the downlink ring buffer will underflow or overflow
Bug: 199230403
Test: Local build + Telephony test for five minutes: No glitch observed.
Signed-off-by: Roger Fang <rogerfang@google.com>
Change-Id: Ifbcd9252c97a7f794e0b142e69faf1b0f3041098
Apply the entry point of raw path which writes data through
pcm mmap from user space to DRAM ring buffer.
Bug: 190775545
Test: OboeTester
Change-Id: I3f61126f323fcebc0a2b53c06d564b9e9e64f823
Let USB HiFi BE as a standalone bind/src command to AoC.
And fix that USB HiFi Rx no audio after the other touch
sound's UC and BE is closed.
On top of the change of pa/1959717
(pa/Ib82ff06986ebe97d472f4518aa136f32da30da66)
Test: Local test
Bug: 191222376
Change-Id: I1017aab232bd2e929dc4caa9939f0613ba937f86
<Change List>
For mixer_paths.xml to both O6 & R4,
1. Add default value for "MIC Record Soft Gain (dB)" control to accommodate with b/189498328.
2. Update below path name to move compensation gain from "MIC HW Gain At High Power Mode (cB)" to "MIC Record Soft Gain (dB)" to fix recording concurrency issue(b/189294476).
- <path name="handset-mic">
- <path name="speaker-mic">
- <path name="camcorder-mic">
- <path name="voice-recog-mic">
- <path name="unprocessed-mic">
- <path name="unprocessed-dual-mic">
- <path name="unprocessed-triple-mic">
<Validation Results>
All the regression are positive, which is validated based on SD1A.210614.001 build.
1. Built-in mic capturing with expected gain setup and active mic numbers in different mic source(mic/VR/unprocessed/camcorder).
2. Built-in speaker playout with expected gain setup in speaker & speaker-safe mode.
3. Both uplink & downlink for telephony works in HA/HH mode.
Bug: 174448901
Test: basic record pass
Change-Id: I3f7759e6998f419a3d7d87b032d8088f5bc7dac0
Test: Test: local build test. If use highspeed usb + capture. AOC crash. otherwise, everything is normal
Bug: 182996456
Change-Id: I48958acf8dfc77fa90096fc72cd6912c460e1db2
Bug: 178431048
Test: manually verify audio-coupled-haptics is working for Pixel
ringtones on P21 devices
Change-Id: I54a7dbe713e03af031036534f2dba388903ea81e
In AOC, ULL support requires the sink to be ULL
Speaker, Analog HP and USB are ULL Sinks,
Modem and BT are LL
Bug: 165737390
Test: OboeTester --> TEST OUTPUT
Change-Id: I23da02a52586e2f5d017142b5947dd082cdc2c62
<Change List>
For mixer_paths.xml to both O6 & R4,
1. Update path name "voice-speaker" to choose VMON of bottom speaker AMP as EC reference under telephony HH mode.
2. Add the "boost peak current limit" control of cirrus speaker amps for initial value(3.50A) and below paths name.
- "speaker" for stereo speaker playback, top amp with 1.70A, bottom amp with 1.90A
- "speaker-safe" for mono speaker playback(ringtone, alarm, notification), bottom amp with 3.50A
- "voice-handset" for telephony HA mode, top amp with 3.50A
- "voice-speaker" for telephone HH mode, bottom amp with 3.50A
Bug: 174448901
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I8bb847fbf1fc8632edf7a4f27b22184a4dd828d4
AudioRecord not support PCM_FLOAT on FAST path yet.(b/77913243)
Use 16-bit format for low-latency-record.
Bug: 175673727
Test: OboeTester
Change-Id: I450d161cd1b236717ad01287b95f56a284443040
Turn on "LVM Enable" when the offload playback path is applied.
Bug: 180984363
Bug: 165719427
Test: make -j128
Test: test LVM effects and visualizer on offload playback on oriole
Change-Id: I5e64575ce39fe0e8d9f54913ccab9cc47da8763e
Request From HW Darren and only modify on o6/r4
Test: verify by HW Darren
Bug: 182761985
Signed-off-by: yixuanjiang <yixuanjiang@google.com>
Change-Id: I5461ed54078dce1a532b345a923530fa00ddd97f
