1. Reduce the polling time to 60s to reduce the lantancy when ThermalHAL
miss the trigger sensor's notification.
2. Adjust the trigger sensor's threshold to lower temperature.
Bug: 191971470
Bug: 191795038
Test: adb shell lshal debug android.hardware.thermal@2.0::IThermal/default
Change-Id: I2559944dfdef684ee93867a15dea257ee5f435b9
This reduces the brightening and darkening light debounce
configuration to match R3 and earlier Pixel devices.
Bug: 185770517
Test: Verified "dumpsys display" shows correct config values.
Verified brightness transitions are similar to R3 now.
Change-Id: I6bd47cb52c28c63ece6b5247344a6cf062eb31ea
1. Update charging throttling policy according to the new kernel change
2. Adjust the virtual sensor formula for 5G cases.
Bug: 182970733
Bug: 183559513
Bug: 190449889
Bug: 190450703
Test: Verified by emul temp
adb shell lshal debug android.hardware.thermal@2.0::IThermal/default
Change-Id: Ieb859c93cdfa7486ad199af21b57db0732c24006
Update the Default brightenss to 0.17429718 for mapping to 140 nits
Bug: 187917731
Test: Dump the display log and check mScreenBrightness
Change-Id: I9836a2dd0127c881b0eceb4d2c908bb52ea709e7
For raven, set the set vendor.powerhal.adpf.rate to 8.3ms
For oriole, set the set vendor.powerhal.adpf.rate to 11.1ms
Bug: 177493042
Test: build
Change-Id: I1f535105f66d6bf34025f3c11d94c83d69c730da
<Change List>
For mixer_paths.xml to both O6 & R4,
1. Add default value for "MIC Record Soft Gain (dB)" control to accommodate with b/189498328.
2. Update below path name to move compensation gain from "MIC HW Gain At High Power Mode (cB)" to "MIC Record Soft Gain (dB)" to fix recording concurrency issue(b/189294476).
- <path name="handset-mic">
- <path name="speaker-mic">
- <path name="camcorder-mic">
- <path name="voice-recog-mic">
- <path name="unprocessed-mic">
- <path name="unprocessed-dual-mic">
- <path name="unprocessed-triple-mic">
<Validation Results>
All the regression are positive, which is validated based on SD1A.210614.001 build.
1. Built-in mic capturing with expected gain setup and active mic numbers in different mic source(mic/VR/unprocessed/camcorder).
2. Built-in speaker playout with expected gain setup in speaker & speaker-safe mode.
3. Both uplink & downlink for telephony works in HA/HH mode.
Bug: 174448901
Test: basic record pass
Change-Id: I3f7759e6998f419a3d7d87b032d8088f5bc7dac0
Previously, we defined a list of kernel modules that should be
excluded from the vendor_boot image. (Those modules are loaded
from the vendor_dlkm partition during second stage init.)
Going forward, we import a list distributed by the kernel build that
explicitly defines the kernel modules to included in the vendor_boot
image.
Bug: 190652328
Change-Id: I8d67bfdaa121ddd82dc9e493c9b18cebdc05233c
1. Support more camcorder tuning with different channels
2. Update the latest params on WNR, SUR, Linear gain, MBDRC module.
Bug: 181869495
Bug: 186721091
Bug: 174448901
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I969b9bbb6a3fd74206dfc0bf385d9ebc1fddf194
Oriole WHI A updated.
Bug: 188365095
Test: Confirm throttling based on criteria matched
Signed-off-by: George Lee <geolee@google.com>
Change-Id: Ic3dcb7ed7af8aa40f56087fa72603e21c5c6b1ec
Set Zone 2: < 30 Lux and UI brightness 45%. Lock 90Hz
Set Zone 3: > 50,000 Lux and UI normal brightness 100%. Lock 60Hz
Bug: 187929149
Bug: 190018500
Test: no refresh rate chagne in the blocking zone
Change-Id: Iffe10c76cfff1c8eac9361e68a10377d26b48d10
//O6
1. HA NB/WB/SWB/FB : Mic blocked paramter temp disable
2. HH NB/WB/SWB/FB: Mic blocked parameter temp disable
3. HA FB EVT modification
4. HH FB EVT modification
=> Mic design change : FB TX pre-FdEQ
=> RX Distortion : FB RX TdDRC, FdEQ
=> Volume curve : FB SPK_VOL
5. HE TTY VCO: sync the latest of HH TX
6. HE TTY HCO: sync the latest of HH RX
7. HE Headphone : sync the latest of HH TX
8 HAC TX: sync the latest of HA TX
9. HE blackbird: Modify TX operation mode, low-delay and Handfree
10. HE Condor: Modify TX operation mode, low-delay and Handfree
11. HE Condor-Certification1: Modify TX operation mode, low-delay and Handfree
//R4
1. HA NB/WB/SWB/FB : Mic blocked paramter temp disable
2. HH NB/WB/SWB/FB: Mic blocked parameter temp disable
3. HE TTY VCO: sync the latest of HH TX
4. HE Headphone : sync the latest of HH TX
5. HAC TX: sync the latest of HA TX
6. HE blackbird: Modify TX operation mode, low-delay and Handfree
7. HE Condor: Modify TX operation mode, low-delay and Handfree
8. HE Condor-Certification1: Modify TX operation mode, low-delay and Handfree
Bug: 174635995
Test: manual test
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: I55824022f4e15c9f62b8624d390febf1195499da
