Telephony downlink ASRC should be enabled for USB. See b/173577733.
Otherwise the downlink ring buffer will underflow or overflow
Bug: 199230403
Test: Local build + Telephony test for five minutes: No glitch observed.
Signed-off-by: Roger Fang <rogerfang@google.com>
Change-Id: Ifbcd9252c97a7f794e0b142e69faf1b0f3041098
- changes volume 1,2,3,4,5 (due to a sound quality noise floor issue)
Bug: 198224217
Test: manual power test (b/198224217#comment21)
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ied7e88ad941e8a13e2080da6e2897b9541966dd0
R4O6
Update camcorder tunings files for FRC
Reason:
- The SA-lite pipeline is used for 3rd party camcorder/recorder and
need to be updated tuning for audio quality (b/185293492)
- There is e-Noise issue could be noticed when using 3rd party
camcorder/recorder
Change list:
Update audio_platform_configuration.xml file so that parameters in
SA-lite pipeline can be loaded correctly
Update template.xml file to enable feature swapping microphone
assessment in SA-lite pipeline
Update recording.gatf file for modifing tuning parameters
Validation:
3rd party camcorder/recorder function are good and validation was
used SD1A.210817.007 (7665414)
Bug: 197492283
Test: forrest build passed
Change-Id: Ifc66519c92935dc4bd14d68a85a491f96429272a
Release Notes (R4):
- Retune top volumes for more balanced sound, less harsh
- Heavy emphasis on vocals, both depth and clarity
- DTMF volume curve reduced to better align w/ O6, F2, C2, B9
- SYSTEM volume curve reduced to better align touch sounds
- SYSTEM volume curve copied into AUDIBLE volume curve
Release notes (O6):
- Camera shutter (system sound) decreased volume curve to better align w/ R4/B9 and F2/C2
- Slight adjustment at min vol point for DTMF
- SYSTEM volume curve reduced to mitigate loud camera shutter
- SYSTEM volume curve copied into AUDIBLE volume curve
Bug:190960105
Test: High level tuning validation (b/190960105#comment15)
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Icf0c9e921017b5e06ec950452a78a9d89acf86f2
Update below stream's volume curves to refine system sound output
from speaker too loud in the lowest volume.
<volume stream="AUDIO_STREAM_SYSTEM" deviceCategory="DEVICE_CATEGORY_SPEAKER">
<volume stream="AUDIO_STREAM_RING" deviceCategory="DEVICE_CATEGORY_SPEAKER">
<volume stream="AUDIO_STREAM_ALARM" deviceCategory="DEVICE_CATEGORY_SPEAKER">
<volume stream="AUDIO_STREAM_NOTIFICATION" deviceCategory="DEVICE_CATEGORY_SPEAKER">
<volume stream="AUDIO_STREAM_DTMF" deviceCategory="DEVICE_CATEGORY_SPEAKER">
Refine audio-tables.mk location to make sure the xml is updated.
Bug: 195387287
Test: QMC verified
Test: Local built and verified vendor/etc/audio_policy_volumes.xml is correct one
Signed-off-by: Robert Lee <lerobert@google.com>
Change-Id: I13188d7470092448a2660f89d43cf13a56c22edc
HAL can get the device latency from bluetooth headset.
We just to set the latency of the device side.
Bug: 195166550
Test: av sync
Change-Id: Id64b7ea796ddc4de996817d0553f1855b4d9485a
Bug: 194169487
Test: Test Diagnostic Tools microphone test
Signed-off-by: Robert Lee <lerobert@google.com>
Change-Id: Ice468e91591f5e552e733d187ade86e76896c5b5
For raw playback, the buffer size needs to equal to the
ring buffer size. AoC changes the buffer size to 16384 bytes,
but it cannot be divisible by 48(1ms frames with 48000 sample rate).
Use the period size(frame couts) from configuration file.
Bug: 194398677
Test: OboeTester->TEST OUTPUT
Change-Id: I07f0cb7d5904e4e3ef78b9a15d31590fdd5a9087
Adjust the latency for OUT_USB_HEADSET_BE_CFG
Bug: 174992590
Test: Test av sync for video playback
Change-Id: Idc1dedbbc21290106d417905832810b1ebd1c576
Apply the entry point of raw path which writes data through
pcm mmap from user space to DRAM ring buffer.
Bug: 190775545
Test: OboeTester
Change-Id: I3f61126f323fcebc0a2b53c06d564b9e9e64f823
Let USB HiFi BE as a standalone bind/src command to AoC.
And fix that USB HiFi Rx no audio after the other touch
sound's UC and BE is closed.
On top of the change of pa/1959717
(pa/Ib82ff06986ebe97d472f4518aa136f32da30da66)
Test: Local test
Bug: 191222376
Change-Id: I1017aab232bd2e929dc4caa9939f0613ba937f86
Change the period size to 20 for audio record.
Otherwise it will apply fast capture.
Fast capture timestamps are not supported yet.
Bug: 190453606
Bug: 189793417
Test: Test av sync for camera recording
Test: Test av sync for video playback
Change-Id: Ic7225979a411f6fdef1e5869df7f816bd49003b1
<Change List>
For audio_platform_configuration.xml to both O6 & R4,
1. Add below devices for input_backend_cfg_mic_mapping to fix b/188696633.
- <backend_cfg in_cfg="IN_CAMCORDER_INVERT_LANDSCAPE_BE_CFG">
- <backend_cfg in_cfg="IN_CAMCORDER_PORTRAIT_BE_CFG">
- <backend_cfg in_cfg="IN_CAMCORDER_SELFIE_LANDSCAPE_BE_CFG">
- <backend_cfg in_cfg="IN_CAMCORDER_SELFIE_INVERT_LANDSCAPE_BE_CFG">
- <backend_cfg in_cfg="IN_CAMCORDER_SELFIE_PORTRAIT_BE_CFG">
- <backend_cfg in_cfg="IN_VOICE_RECOGN_MIC_BE_CFG">
- <backend_cfg in_cfg="IN_UNPROCESSED_MIC_BE_CFG">
- <backend_cfg in_cfg="IN_UNPROCESSED_DUAL_MIC_BE_CFG">
- <backend_cfg in_cfg="IN_UNPROCESSED_TRIPLE_MIC_BE_CFG">
<Validation Results>
All the regression are positive, which is validated based on SD1A.210614.001 build.
1. Fix freeze issue when running Diagnostic Tool for microphone test.
2. Built-in mic capturing with expected gain setup and active mic numbers in different mic source(mic/VR/unprocessed/camcorder).
3. Built-in speaker playout with expected gain setup in speaker & speaker-safe mode.
4. Both uplink & downlink for telephony works in HA/HH mode.
Bug: 174448901
Test: Builds pass and verified by hardware
Change-Id: Ifb14911eb25ef2b0f42d29b609ae6f9b74ddaa44
Signed-off-by: Robert Lee <lerobert@google.com>
<Change List>
For mixer_paths.xml to both O6 & R4,
1. Add default value for "MIC Record Soft Gain (dB)" control to accommodate with b/189498328.
2. Update below path name to move compensation gain from "MIC HW Gain At High Power Mode (cB)" to "MIC Record Soft Gain (dB)" to fix recording concurrency issue(b/189294476).
- <path name="handset-mic">
- <path name="speaker-mic">
- <path name="camcorder-mic">
- <path name="voice-recog-mic">
- <path name="unprocessed-mic">
- <path name="unprocessed-dual-mic">
- <path name="unprocessed-triple-mic">
<Validation Results>
All the regression are positive, which is validated based on SD1A.210614.001 build.
1. Built-in mic capturing with expected gain setup and active mic numbers in different mic source(mic/VR/unprocessed/camcorder).
2. Built-in speaker playout with expected gain setup in speaker & speaker-safe mode.
3. Both uplink & downlink for telephony works in HA/HH mode.
Bug: 174448901
Test: basic record pass
Change-Id: I3f7759e6998f419a3d7d87b032d8088f5bc7dac0
1. Support more camcorder tuning with different channels
2. Update the latest params on WNR, SUR, Linear gain, MBDRC module.
Bug: 181869495
Bug: 186721091
Bug: 174448901
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I969b9bbb6a3fd74206dfc0bf385d9ebc1fddf194
Bug: 187912470
Test: make -j128
Test: deep buffer and compress offload via speaker, USB headset, BT
earphone
Test: phone call via handset
Test: hotword detection
Change-Id: I80ec553797ff7955de0464b98046f879424d0fc5
Need to add a new control "USB Config To AoC" in mixer table
Bug: 190002718
Test: verify it with a new mixer table, and it works on O6
Change-Id: Ibcb43d50d0185d8b5249aa2a5620c69871b97de5
Test: Test: local build test. If use highspeed usb + capture. AOC crash. otherwise, everything is normal
Bug: 182996456
Change-Id: I48958acf8dfc77fa90096fc72cd6912c460e1db2
This reverts commit fd3f417352.
Reason for revert: functional implementation of audio coupled haptics feature working again
Bug: 178431048
Test: manually verify audio-coupled-haptics is working for Pixel
ringtones on P21 devices
Change-Id: Ibda582e6b4f95dcf9bd5497dbc3580eb1569f9a2
Bug: 178431048
Test: manually verify audio-coupled-haptics is working for Pixel
ringtones on P21 devices
Change-Id: I54a7dbe713e03af031036534f2dba388903ea81e
In AOC, ULL support requires the sink to be ULL
Speaker, Analog HP and USB are ULL Sinks,
Modem and BT are LL
Bug: 165737390
Test: OboeTester --> TEST OUTPUT
Change-Id: I23da02a52586e2f5d017142b5947dd082cdc2c62
<Change List>
For mixer_paths.xml to both O6 & R4,
1. Update path name "voice-speaker" to choose VMON of bottom speaker AMP as EC reference under telephony HH mode.
2. Add the "boost peak current limit" control of cirrus speaker amps for initial value(3.50A) and below paths name.
- "speaker" for stereo speaker playback, top amp with 1.70A, bottom amp with 1.90A
- "speaker-safe" for mono speaker playback(ringtone, alarm, notification), bottom amp with 3.50A
- "voice-handset" for telephony HA mode, top amp with 3.50A
- "voice-speaker" for telephone HH mode, bottom amp with 3.50A
Bug: 174448901
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I8bb847fbf1fc8632edf7a4f27b22184a4dd828d4
AudioRecord not support PCM_FLOAT on FAST path yet.(b/77913243)
Use 16-bit format for low-latency-record.
Bug: 175673727
Test: OboeTester
Change-Id: I450d161cd1b236717ad01287b95f56a284443040
Move AEC and NS to the liboffloadeffect
Bug: 187153996
Test: make -j128
Test: run cts --include-filter "CtsMediaTestCases android.media.cts.AudioPreProcessingTest"
Change-Id: Ic4b7260b483b776ca917dc3694b7d66ba7eefde7
Temporarily remove haptics support so that Telecom fallback mechanism of
default vibration will play whenever audio coupled haptics is not
supported.
Bug: 186720581
Test: manually verify on raviole that default vibration plays for
ringtone
Change-Id: I77e4a4a7ff19e6665434d9318271d20cd64e6c1d
Signed-off-by: Vince Leung <leungv@google.com>
For Cirrus amp, ASP means Audio Serial Port.
For AoC, ASP means Audio Signal Processing.
Bug: 184238845
Test: manual test factory test command
Change-Id: I8d62535056ef680e14ccc708c8f722a3dfab12ab
Signed-off-by: Robert Lee <lerobert@google.com>
Increase period size to avoid using Fastmixer in the deep buffer
playback.
Bug: 185096280
Test: manual audio tests
Signed-off-by: juyuchen <juyuchen@google.com>
Change-Id: I8ce12f151eaa9b711e1dacaf12e2f70c0555bf30
Turn on "LVM Enable" when the offload playback path is applied.
Bug: 180984363
Bug: 165719427
Test: make -j128
Test: test LVM effects and visualizer on offload playback on oriole
Change-Id: I5e64575ce39fe0e8d9f54913ccab9cc47da8763e
