AoC can support mmap on BT both playback and recording
after gpar/322484.
Bug: 232205959
Test: OboeTester
Signed-off-by: millerliang <millerliang@google.com>
Change-Id: I53d70625acb4629954f2bd3041d9d52f4b5c61d1
Some 3rd party app may use one or three microhpne(s)
to do the camera recording.
Add these two configurations to UC_AUDIO_RECORD to sync
the audio and video of the recoreded video.
Bug: 260824124
Test: Reporter verified
Change-Id: Ide731ef55457a4aee47a1cbfd7badd2ba31704dc
Remove spatial audio configuration in speaker path
to match the rule.
Bug: 247415765
Test: spatial audio playback
Change-Id: I3df0cdf6c47ecbc633ac2ddcba026084b682b17e
extend this to prevent alsa trigger stop playback
and causing pop
Bug: 238056484
Signed-off-by: vincenttew <vincenttew@google.com>
Change-Id: I3f422169a8bccbeece0c97b3ba515d99f7dab2e2
To meet the av sync, we need to adjust the uc latency
for immersive playback.
Bug: 243645548
Test: Test with av sync video
Change-Id: I5980c8833e168f859b541eeab7d093c206857233
Enable gapless support on compressed_offload w/o trimming delay and padding.
Bug: 236351705
Test: test with AOSP Music and MediaMonkey
Change-Id: Ie23f10d612ee98d6926236de9174aa90e75de415
Signed-off-by: Robert Lee <lerobert@google.com>
Change to use pcm id 30 for immersive output,
which is using raw path in AoC to get lower
roundtrip latency.
Bug: 237677573
Test: spatial audio playback
Change-Id: Ibbd3e70df5f35503673c2834fda7a22cbeaae557
Update audio policy and effect configuration files to
support spatial audio feature
Bug: 237677573
Test: make
Merged-In: I4a7e2eb3c44192954b7bcf804d14097e94e90eb0
Change-Id: I4a7e2eb3c44192954b7bcf804d14097e94e90eb0
- redefine mute duration of primary output from 160ms to 40ms to avoid
cutting of preview notification.
Bug: 233176336
Test: preview notification/voice end call tone
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ib696638eca99b1f58300533cca586cab209b188d
add mic gain on path "speaker-mic" from 0 to 22
Bug: 228224014
Test: audio record
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: Idafad36fdfb5c5f54e2ad3c1718b814b956ac17c
Revert "DO NOT MERGE Audio configuration for spatial audio"
Bug: 223736548
Test: make
This reverts commit edfc5e86bd.
Change-Id: Ie693f24b76d00469ad71a36989e481023946c3bb
Update audio policy and effect configuration files to
support spatial audio feature
Bug: 189423448
Test: make
Change-Id: I2274fb4784eef5e28cadd9f33c38fdbbe60f6b40
If ro.bluetooth.a2dp_offload.supported == true AND persist.bluetooth.a2dp_offload.disabled == true
use audio_policy_configuration_a2dp_offload_disabled.xml (a2dp X LE X)
If ro.bluetooth.a2dp_offload.supported == true AND persist.bluetooth.a2dp_offload.disabled == false AND
(ro.bluetooth.leaudio_offload.supported == false OR persist.bluetooth.leaudio_offload.disabled == true)
use audio_policy_configuration_le_offload_disabled.xml (a2dp O LE X)
If ro.bluetooth.a2dp_offload.supported == true AND persist.bluetooth.a2dp_offload.disabled == false AND
ro.bluetooth.leaudio_offload.supported == true AND persist.bluetooth.leaudio_offload.disabled == false
use default audio_policy_configuration.xml (a2dp O LE O)
Note:
The above settings are based on ro.bluetooth.a2dp_offload.supported == true condition
If ro.bluetooth.a2dp_offload.supported == false, the content of the default audio_policy_configuration.xml file must be replaced by audio_policy_configuration_a2dp_offload_disabled.xml on the target
Test: manual
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: Ibea329bb5b7d24b18ed3e915c9e7306729b17dfd
currently mfg audio tool using audio-recordC usb-headset-mic
in mixer_paths.xml, add a new path for mfg usb recording to
switching the usb mic source
modify the usb alsa control to v2 since the latest alsa control
already changed
Bug: 213027646
Test: verify pass with mfg tool usb-record
Signed-off-by: vincenttew <vincenttew@google.com>
Change-Id: If3af632ed2bddcdd1329f17fc89ea82162d810ae
Add Audio Capture Eraser Enable to switch
Eraser for recording path.
For gain of this path, we shouldn't apply
software gain, because the input source is
from hotword pipeline.
Test: build pass
Bug: 172266161
Change-Id: Iabe372e7fe91e557ba9125af14bfb61606c09ea0
The ALARM volume curve on SPEAKER device must have a lowest
point with abscisse 0 instead of 1 to prevent the stream from
being muted when lowest UI index is selected.
Bug: 201069348
Test: set alarm volume to min and play alarm
Change-Id: I29dda66002562e9ce889bd4f8b0154c2837f7be5
Change the period size of VoIP Record to 20ms.
Otherwise it will apply fast capture.
Fast capture timestamps are not supported yet.
Bug: 196912510
Test: Build pass
Change-Id: I6434a7596880712efa7cbfa03b3480efb5e2c2aa
Telephony downlink ASRC should be enabled for USB. See b/173577733.
Otherwise the downlink ring buffer will underflow or overflow
Bug: 199230403
Test: Local build + Telephony test for five minutes: No glitch observed.
Signed-off-by: Roger Fang <rogerfang@google.com>
Change-Id: Ifbcd9252c97a7f794e0b142e69faf1b0f3041098
- changes volume 1,2,3,4,5 (due to a sound quality noise floor issue)
Bug: 198224217
Test: manual power test (b/198224217#comment21)
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ied7e88ad941e8a13e2080da6e2897b9541966dd0
R4O6
Update camcorder tunings files for FRC
Reason:
- The SA-lite pipeline is used for 3rd party camcorder/recorder and
need to be updated tuning for audio quality (b/185293492)
- There is e-Noise issue could be noticed when using 3rd party
camcorder/recorder
Change list:
Update audio_platform_configuration.xml file so that parameters in
SA-lite pipeline can be loaded correctly
Update template.xml file to enable feature swapping microphone
assessment in SA-lite pipeline
Update recording.gatf file for modifing tuning parameters
Validation:
3rd party camcorder/recorder function are good and validation was
used SD1A.210817.007 (7665414)
Bug: 197492283
Test: forrest build passed
Change-Id: Ifc66519c92935dc4bd14d68a85a491f96429272a
Release Notes (R4):
- Retune top volumes for more balanced sound, less harsh
- Heavy emphasis on vocals, both depth and clarity
- DTMF volume curve reduced to better align w/ O6, F2, C2, B9
- SYSTEM volume curve reduced to better align touch sounds
- SYSTEM volume curve copied into AUDIBLE volume curve
Release notes (O6):
- Camera shutter (system sound) decreased volume curve to better align w/ R4/B9 and F2/C2
- Slight adjustment at min vol point for DTMF
- SYSTEM volume curve reduced to mitigate loud camera shutter
- SYSTEM volume curve copied into AUDIBLE volume curve
Bug:190960105
Test: High level tuning validation (b/190960105#comment15)
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Icf0c9e921017b5e06ec950452a78a9d89acf86f2
Update below stream's volume curves to refine system sound output
from speaker too loud in the lowest volume.
<volume stream="AUDIO_STREAM_SYSTEM" deviceCategory="DEVICE_CATEGORY_SPEAKER">
<volume stream="AUDIO_STREAM_RING" deviceCategory="DEVICE_CATEGORY_SPEAKER">
<volume stream="AUDIO_STREAM_ALARM" deviceCategory="DEVICE_CATEGORY_SPEAKER">
<volume stream="AUDIO_STREAM_NOTIFICATION" deviceCategory="DEVICE_CATEGORY_SPEAKER">
<volume stream="AUDIO_STREAM_DTMF" deviceCategory="DEVICE_CATEGORY_SPEAKER">
Refine audio-tables.mk location to make sure the xml is updated.
Bug: 195387287
Test: QMC verified
Test: Local built and verified vendor/etc/audio_policy_volumes.xml is correct one
Signed-off-by: Robert Lee <lerobert@google.com>
Change-Id: I13188d7470092448a2660f89d43cf13a56c22edc
HAL can get the device latency from bluetooth headset.
We just to set the latency of the device side.
Bug: 195166550
Test: av sync
Change-Id: Id64b7ea796ddc4de996817d0553f1855b4d9485a
Bug: 194169487
Test: Test Diagnostic Tools microphone test
Signed-off-by: Robert Lee <lerobert@google.com>
Change-Id: Ice468e91591f5e552e733d187ade86e76896c5b5
For raw playback, the buffer size needs to equal to the
ring buffer size. AoC changes the buffer size to 16384 bytes,
but it cannot be divisible by 48(1ms frames with 48000 sample rate).
Use the period size(frame couts) from configuration file.
Bug: 194398677
Test: OboeTester->TEST OUTPUT
Change-Id: I07f0cb7d5904e4e3ef78b9a15d31590fdd5a9087
Adjust the latency for OUT_USB_HEADSET_BE_CFG
Bug: 174992590
Test: Test av sync for video playback
Change-Id: Idc1dedbbc21290106d417905832810b1ebd1c576
Apply the entry point of raw path which writes data through
pcm mmap from user space to DRAM ring buffer.
Bug: 190775545
Test: OboeTester
Change-Id: I3f61126f323fcebc0a2b53c06d564b9e9e64f823
Let USB HiFi BE as a standalone bind/src command to AoC.
And fix that USB HiFi Rx no audio after the other touch
sound's UC and BE is closed.
On top of the change of pa/1959717
(pa/Ib82ff06986ebe97d472f4518aa136f32da30da66)
Test: Local test
Bug: 191222376
Change-Id: I1017aab232bd2e929dc4caa9939f0613ba937f86
Change the period size to 20 for audio record.
Otherwise it will apply fast capture.
Fast capture timestamps are not supported yet.
Bug: 190453606
Bug: 189793417
Test: Test av sync for camera recording
Test: Test av sync for video playback
Change-Id: Ic7225979a411f6fdef1e5869df7f816bd49003b1
