These overlays seem to be left over from barbet. With these values
adjusted, the padding on left and right sides of the status bar is
more symmetrical and the landscape top padding is correct.
Co-authored-by: Michael Bestas <mkbestas@lineageos.org>
Change-Id: I10c3f495b7627200b05a24f5b259f789e62ada13
Fix status bar height not being scaled properly after switching
screen resolution to 1080p.
DP = PX * (160 / DPI)
Change-Id: I7eba09b6da2eae6bd4274d3ad6acc85311d32db1
Use runtime resource overlay instead of build time
config overlay so that P21 and later devices are covered
automatically
Bug: 274172776
Test: Manual testing with Messenger app video call
Change-Id: I56f1ab98c09120460af68a5c44c6a243d8d70690
Test: Manually, on a raven or oriole, inspect the output of
`dumpsys batterystats --wakeups`
Bug: 267717665
Change-Id: I92fce56d81a5915184b2c83d3b9c93af54d10af4
Turn off the large JPEG stream on camera1 apps
that experience high power consumption during
video call
Bug: 254350466
Test: Manual testing with Messenger app video call
Change-Id: Ic695299a03fe442e36a35b0770b855ac989c0923
This mapping is used by the framework for attributing wakeups. Each
hardware device that can cause wakeups can be mapped to a list of
subsystems that rely on that device for functioning properly.
Adding the mapping of rtc clock in these devices to the "Alarm"
subsystem, which is the only subsystem currently defined by the
framework for wakeup attribution. More mappings can be added as more
subsystems are defined.
Test: Manually: Build and flash a raven/oriole target and run:
adb shell dumpsys batterystats --wakeups
The map output should match the xml file.
Bug: 249370357
Bug: 195684213
Change-Id: I11b8297ac07dee2bba3715e6047271026093c5c8
Revert "DO NOT MERGE Remove unintended face config am: 875235afbf"
Revert submission 18799414-am-e98f52416a40436ba0044e72d6feed21
Reason for revert: The merge path was only meant for tm-dev.
Reverted Changes:
I6ace51cab:DO NOT MERGE Remove faceauth from raven am: 783e56...
I049a9c205:DO NOT MERGE Remove unintended face config am: 875...
I50ae185c6:DO NOT MERGE Remove unintended faceauth configs am...
Change-Id: I26f6409b50769dac5509313a32517cb270edc779
[O6/R4]
Phasing out config_roundedCornerMultipleRadius config from device
overlay package.
Bug: 224688507
Test: Build ROM and pass presubmit tes
Change-Id: Ie0b0c7b9e3591f11e4a481440943cf0a8b328340
Bring back old usage of status_bar_height, status_bar_height_portrait,
and status_bar_height_landscape by set the size containing cutout size.
Bug: 216782082
Test: make
Change-Id: I05142c120f05bdb5fa0543e61a6f50f46f6b0d82
This reverts commit 25c80c8cca.
Reason for revert: This frequency range is still unstable, needs to be validated before it can be used.
Bug: 223739586
Change-Id: Id3853b1041d441f80b19965f5875040f2aabb8ab
Make pattern vibrate on a higher frequency range to increase the overall
vibration intensity and make the notification vibration more noisy when
the phone is on a solid surface, to address user feedback.
Bug: 210535717
Test: manual
Change-Id: Ic7d97d35e271b23e34dde8afb92dfcee29e7563a
This CL updates resource overlay of
rounded_corner_content_padding
for raven/oriole so that the same device-specific value can be seen
from both the Framework code and the SysUI.
With my previous CL [1], the SysUI continues to see the same value
even after this migration.
[1]: I0c3717c0bdfc928167c6eba06247b37caabf33b9
24d6b891f572f7be419d3acc9793ca68d062cf35
Bug: 215554582
Test: presubmit
Change-Id: Id95b8c063ece7eb43d91f96afe21b4fb01e8b489
Add the PWLE vibration pattern to the config.xml overlays for Pixel 2021
devices that support frequency control.
The patterns use the amplitude and frequency hand-designed for both
raven and oriole devices. The amplitude is using the maximum supported
value of 0.4, to allow scaling based on user settings.
Bug: 212366218
Test: manual
Change-Id: I73a2f3e50901b80aef299f4c8e9807a551170bbc
Merged-In: I73a2f3e50901b80aef299f4c8e9807a551170bbc
Add the PWLE vibration pattern to the config.xml overlays for Pixel 2021
devices that support frequency control.
The patterns use the amplitude and frequency hand-designed for both
raven and oriole devices. The amplitude is using the maximum supported
value of 0.4, to allow scaling based on user settings.
Bug: 212366218
Test: manual
Change-Id: I73a2f3e50901b80aef299f4c8e9807a551170bbc
Bug: 211649038
Test: Manual. Modify the enable_ons_auto_provisioning flag to true in config.xml, build, flash and adb log should not have ERR_AUTO_PROVISIONING_DISABLED
Change-Id: Ia684e5b55fd69cbb15cfbcc0f511d01baa955c5a
With the new added APIs, we don't need to overlay status_bar_height that
contains cutout size and quick_qs_offset_height anymore.
Bug: 186604541
Test: make
Change-Id: Ib2ebacbc3250a1c2a2ad2b26f92eda6651fec37a
Moving forward, binned brightness will not
use prox. Let's get rid of this unnecessary config.
Test: manual
Bug: 194151347
Change-Id: I3352a3007138232c32aeb43ce4ec3ce97dad239d
