[O6/R4]
Phasing out config_roundedCornerMultipleRadius config from device
overlay package.
Bug: 224688507
Test: Build ROM and pass presubmit tes
Change-Id: Ie0b0c7b9e3591f11e4a481440943cf0a8b328340
Bring back old usage of status_bar_height, status_bar_height_portrait,
and status_bar_height_landscape by set the size containing cutout size.
Bug: 216782082
Test: make
Change-Id: I05142c120f05bdb5fa0543e61a6f50f46f6b0d82
This reverts commit 25c80c8cca.
Reason for revert: This frequency range is still unstable, needs to be validated before it can be used.
Bug: 223739586
Change-Id: Id3853b1041d441f80b19965f5875040f2aabb8ab
Make pattern vibrate on a higher frequency range to increase the overall
vibration intensity and make the notification vibration more noisy when
the phone is on a solid surface, to address user feedback.
Bug: 210535717
Test: manual
Change-Id: Ic7d97d35e271b23e34dde8afb92dfcee29e7563a
This CL updates resource overlay of
rounded_corner_content_padding
for raven/oriole so that the same device-specific value can be seen
from both the Framework code and the SysUI.
With my previous CL [1], the SysUI continues to see the same value
even after this migration.
[1]: I0c3717c0bdfc928167c6eba06247b37caabf33b9
24d6b891f572f7be419d3acc9793ca68d062cf35
Bug: 215554582
Test: presubmit
Change-Id: Id95b8c063ece7eb43d91f96afe21b4fb01e8b489
Add the PWLE vibration pattern to the config.xml overlays for Pixel 2021
devices that support frequency control.
The patterns use the amplitude and frequency hand-designed for both
raven and oriole devices. The amplitude is using the maximum supported
value of 0.4, to allow scaling based on user settings.
Bug: 212366218
Test: manual
Change-Id: I73a2f3e50901b80aef299f4c8e9807a551170bbc
Merged-In: I73a2f3e50901b80aef299f4c8e9807a551170bbc
Add the PWLE vibration pattern to the config.xml overlays for Pixel 2021
devices that support frequency control.
The patterns use the amplitude and frequency hand-designed for both
raven and oriole devices. The amplitude is using the maximum supported
value of 0.4, to allow scaling based on user settings.
Bug: 212366218
Test: manual
Change-Id: I73a2f3e50901b80aef299f4c8e9807a551170bbc
Bug: 211649038
Test: Manual. Modify the enable_ons_auto_provisioning flag to true in config.xml, build, flash and adb log should not have ERR_AUTO_PROVISIONING_DISABLED
Change-Id: Ia684e5b55fd69cbb15cfbcc0f511d01baa955c5a
With the new added APIs, we don't need to overlay status_bar_height that
contains cutout size and quick_qs_offset_height anymore.
Bug: 186604541
Test: make
Change-Id: Ib2ebacbc3250a1c2a2ad2b26f92eda6651fec37a
Moving forward, binned brightness will not
use prox. Let's get rid of this unnecessary config.
Test: manual
Bug: 194151347
Change-Id: I3352a3007138232c32aeb43ce4ec3ce97dad239d
There's still 2px offset when transitioning from
KeyguardStatusBarView to PhoneStatusBarView.
To make the visual perfect, we can adjust more 0.5dp.
Test: Visual
Test: atest SystemUITests
Bug: 195670442
Change-Id: I84d10f2dad665fcbdb01665f5056d08b3c20e0d7
Adjust the system_icons_keyguard_padding_end for O6/R4
Consider below scenario:
1. Enable/Disable multi-user: This case must have x-asix shift due to
home StatusBar did not designed to show avator icon
2. Keyguard/Home StatusBar alignment
3. w/ & w/o privacy dot
4. w/ & w/o plug-in USB cable
5. w/ & w/o show battery percentage
Test: build and check the visual
Bug: 195670442
Change-Id: I783c026e46d7cc01839a4e56fed9fdb89ca6b194
This should not scale with density size increases b/c the
sensor size is fixed.
Test: manual
Change-Id: I84cd73992b657ee292873fd7ba4bf6e73fc6b349
Fixes: 195564809
Update customization for O6/R4
1. Put status_bar_header_height_kegyuard in correct folder
2. Refine system_icons_super_container_avatarless_margin_end
3. Refine the config_mainBuiltInDisplayCutoutRectApproximation xPos
4. Remove unused system_icons_keyguard_padding_end
5. Adjust window rounded corner radius to match H/W corners
Test: manual build and check visual
Test: In keyguard, launch camera and exit, check provacy dot position
Test: In Keyguard, check keyguard status bar height algin home statusbar
Test: atest SystemUITests
Bug: 194324044
Change-Id: I8856b0ae9d5124b44a3aab89b0de8d8ddbe5a4c8
zone condition(15% brightness, 5 Lux) for 120Hz
Bug: 193087466
Test: no refresh rate change in the blocking zone
Change-Id: I4e5918ff5d829a6ad656db1c7f4993e1e8e9c23d
This config indicate whether to allow the device to suspend
when the screen is off due to the proximity sensor. This
resource should only be set to true if the sensor HAL correctly
handles the proximity sensor as a wake-up source. Otherwise,
the device may fail to wake out of suspend reliably.
Bug: 192324731
Test: 1. Unplug USB. 2. make a phone call.
Test: 3. Cover p-sensor, the screen turns off for 10 seconds
Test: 4. Uncover p-sensor. 5. Plug USB.
Test: 6. 'adb shell dmesg | grep suspend' to check if AP ever suspend in calls.
Change-Id: I90c0ef56211908b5a211d9f887bbfc6693a3be40
This reduces the brightening and darkening light debounce
configuration to match R3 and earlier Pixel devices.
Bug: 185770517
Test: Verified "dumpsys display" shows correct config values.
Verified brightness transitions are similar to R3 now.
Change-Id: I6bd47cb52c28c63ece6b5247344a6cf062eb31ea
Update the Default brightenss to 0.17429718 for mapping to 140 nits
Bug: 187917731
Test: Dump the display log and check mScreenBrightness
Change-Id: I9836a2dd0127c881b0eceb4d2c908bb52ea709e7
Set night/low as 2 nits, sun/high as 50 nits
Bug: 184728677
Test: Boot test and check AOD brightness
Change-Id: I0e6f5fda297f3e57f21a1d45e2f70b0dcccf04d1
This CL transitions the regular build to the AIDL fingerprint HAL, while
keeping the factory build on HIDL.
AuthService reports "Registering HIDL ID: 0 Modality: 2 Strength: 15"
only for the factory build.
Bug: 188193467
Test: build raven-userdebug
Test: build factory_raven-userdebug
Test: adb logcat | grep AuthService
Change-Id: I3d02e560e5e624aa85f1c3d14d52d7bb5070ee4d
com.google.android.as is the attention detection package and does not
need the extra light leakage protection.
Test: manual
Fixes: 187917679
Change-Id: I9f8092c278c4799e9c1db52e64592bfa9494062d
