Tuning changes:
- Tuning for f0 limit samples for both top and bottom speakers
- HPF is now cutoff @ 120Hz (used to be 150Hz) for both top and bottom speakers
Firmware changes:
- Upgrade to v6.47 firmware for protection, cal, and diag firmware
Bug: 181874512
Test: manual audio tests
Signed-off-by: juyuchen <juyuchen@google.com>
Change-Id: I2ed80d2397a2f0fde4a8591e0986e3a3abf8e1b0
- Tweaked rounded corners to have different top and bottom assets
- Adjusted the holepunch based on the pixel mapping
- Adjusted status bar height and top padding
- Configured the estimated display cutout area for a 118px box
- Adjust landscape status bar padding
Test: visual, manual
Bug: 179171394
Change-Id: If37587f60245d71c795a55bb8adead5029d1d41a
1.Correct the file path.
2.Should put into corresponding device folder for Oriole and Raven.
Bug: 167996145
Test: manual test
Change-Id: I040077cc1c5a3a2e89f6aa12299c6ef2f1b7ca0f
Enable cellular mitigation on critical battery condition.
Bug: 181572536
Test: Local Test
Signed-off-by: George Lee <geolee@google.com>
Change-Id: I310c3b67bc6a7f83a724005665eeda50b29469f7
Change list:
update the parameters on each module on Camcorder(enable module: IIR1,
linear gain, Surround, IIR2, AGC, MBDRC)
Bug: 181869495
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I9afc4cf202f65138d78040421a10148e2b5097b7
Turn on "LVM Enable" when the offload playback path is applied.
Bug: 180984363
Bug: 165719427
Test: make -j128
Test: test LVM effects and visualizer on offload playback on oriole
Change-Id: I5e64575ce39fe0e8d9f54913ccab9cc47da8763e
1. HA TX/RX FB tuning - TdDRC/FdEQ/PreEQ/PGA, and sync to HAC-TX
2. HH TX/RX FB tuning - TdDRC/FdEQ/PreEQ/PGA
3. HE no mic heaset NB/WB/SWB/FB - sync HH TX
4. TTY HCO/VCO NB/WB/SWB/FB - sync HH RX/TX
5. BT
- BT HAC TX NB/WB/SWB/FB- sync HH TX
- Downlink
* Set RX PGA Gain to be 0.
For all bandwidth NB, WB, SWB and FB.
For all BT scenarios: BTNB-NREC-off, BTNB-NREC-on, BTWB-NREC-off, BTWB-NREC-On, BT-HAC.
* Merge RX BT setting to BT-HAC for NB, WB, SWB and FB.
* Set volume to be 0dB for all volume step. For all bandwidth NB, WB, SWB and FB.
For all BT scenarios: BTNB-NREC-off, BTNB-NREC-on, BTWB-NREC-off, BTWB-NREC-On, BT-HAC.
Bug: 174635995
Test: build pass
Signed-off-by: Carter Hsu <carterhsu@google.com>
Change-Id: I0b9fd9e8421577c1bb07913e2740c60ed5a51b05
- improving the tonal balance in the treble region
Bug:179089765 #comment13
Test: mute on/off, L/R mixed, L/R swap
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Change-Id: Ife791670350dbfddceb420d583c487dc6ce72a68
major changes:
1. Include and build LUT binary
prebuilt files.
Bug: 182729023
Test: Forrest build and run CTS tests.
Change-Id: Ifaac732f241ab42651521fa59f9c5b94aac097cc
Request From HW Darren and only modify on o6/r4
Test: verify by HW Darren
Bug: 182761985
Signed-off-by: yixuanjiang <yixuanjiang@google.com>
Change-Id: I5461ed54078dce1a532b345a923530fa00ddd97f
This config_screenBrightnessNits/config_screenBrightnessBacklight are not used
when we have the displaydeviceconfig (ddc) exist in screenBrightnessMap.
Bug: 177140883
test: check brightness table
Change-Id: I7855602652a39288965e7510084d98d4d040312d
Bug: 173330899
Test: twoshay is launched
Signed-off-by: Steve Pfetsch <spfetsch@google.com>
Change-Id: I189f32e0fcb6b5880bc188971cc847603aafa4dc
Signed-off-by: Tai Kuo <taikuo@google.com>
