shusky: Remove userdebug/eng configuration

Change-Id: I3739e6e099681c667c80723f0f6e3197923ff762
This commit is contained in:
Michael Bestas 2025-06-19 02:02:32 +03:00 committed by Michael Bestas
parent a70d9a3510
commit 4809279a81
No known key found for this signature in database
30 changed files with 12 additions and 549011 deletions

View file

@ -60,29 +60,6 @@ PRODUCT_COPY_FILES += \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/tuning/waves/waves_config.ini:$(TARGET_COPY_OUT_VENDOR)/etc/waves_config.ini \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/tuning/waves/waves_preset.mps:$(TARGET_COPY_OUT_VENDOR)/etc/waves_preset.mps
# userdebug specific
ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_COPY_FILES += \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/tuning/fortemedia/BLUETOOTH.mods:$(TARGET_COPY_OUT_VENDOR)/etc/aoc/BLUETOOTH.mods \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/tuning/fortemedia/HANDSFREE.mods:$(TARGET_COPY_OUT_VENDOR)/etc/aoc/HANDSFREE.mods \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/tuning/fortemedia/HANDSET.mods:$(TARGET_COPY_OUT_VENDOR)/etc/aoc/HANDSET.mods \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/tuning/fortemedia/HEADSET.mods:$(TARGET_COPY_OUT_VENDOR)/etc/aoc/HEADSET.mods
#Bluenote files
PRODUCT_COPY_FILES += \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/tuning/bluenote/template.xml:$(TARGET_COPY_OUT_VENDOR)/etc/aoc/template.xml \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/tuning/bluenote/tuning_constraints_combination.xml:$(TARGET_COPY_OUT_VENDOR)/etc/aoc/tuning_constraints_combination.xml
# Mixer Path Configuration for Audio Speaker Calibration Tool crus_sp_cal
PRODUCT_COPY_FILES += \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/cs35l41/crus_sp_cal_mixer_paths.xml:$(TARGET_COPY_OUT_VENDOR)/etc/crus_sp_cal_mixer_paths.xml
PRODUCT_COPY_FILES += \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/tuning/waves/tests/test_config.ini:$(TARGET_COPY_OUT_VENDOR)/etc/test_config.ini \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/tuning/waves/tests/test_preset.mps:$(TARGET_COPY_OUT_VENDOR)/etc/test_preset.mps
endif
ifeq ($(USE_AUDIO_HAL_AIDL),true)
# Offload spatializer config
PRODUCT_COPY_FILES += \

View file

@ -1,315 +0,0 @@
<?xml version="1.0" encoding="ISO-8859-1"?>
<!-- Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. -->
<!-- -->
<!-- Redistribution and use in source and binary forms, with or without -->
<!-- modification, are permitted provided that the following conditions are -->
<!-- met: -->
<!-- * Redistributions of source code must retain the above copyright -->
<!-- notice, this list of conditions and the following disclaimer. -->
<!-- * Redistributions in binary form must reproduce the above -->
<!-- copyright notice, this list of conditions and the following -->
<!-- disclaimer in the documentation and/or other materials provided -->
<!-- with the distribution. -->
<!-- * Neither the name of The Linux Foundation nor the names of its -->
<!-- contributors may be used to endorse or promote products derived -->
<!-- from this software without specific prior written permission. -->
<!-- -->
<!-- THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -->
<!-- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
<!-- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -->
<!-- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -->
<!-- BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -->
<!-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -->
<!-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -->
<!-- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -->
<!-- OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -->
<!-- IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -->
<mixer>
<!-- Initial Values -->
<!-- Preload Stage -->
<ctl name="Main AMP Enable Switch" value="0" />
<ctl name="DSP1 Preload Switch" value="0" />
<ctl name="R Main AMP Enable Switch" value="0" />
<ctl name="R DSP1 Preload Switch" value="0" />
<!-- Clock-trigger Stage -->
<ctl name="SINK_IDS" id="0" value="-1"/>
<ctl name="SINK_IDS" id="1" value="-1"/>
<ctl name="PCM Playback Volume" value="10"/>
<ctl name="TDM_0_RX Mixer EP6" value="0"/>
<!-- Preparation Stage -->
<path name="crus-switch-fw-prepare">
<ctl name="DRE DRE Switch" value="1" />
<ctl name="VBSTMON Output Switch" value="1" />
<ctl name="DSP Booted" value="0" />
<ctl name="DSP1 Preload Switch" value="0" />
<ctl name="R DRE DRE Switch" value="1" />
<ctl name="R VBSTMON Output Switch" value="1" />
<ctl name="R DSP Booted" value="0" />
<ctl name="R DSP1 Preload Switch" value="0" />
</path>
<!-- Preload Stage -->
<path name="crus-fw-preload">
<ctl name="DSP1 Preload Switch" value="1" />
<ctl name="R DSP1 Preload Switch" value="1" />
</path>
<path name="crus-fw-preload-amp1">
<ctl name="DSP1 Preload Switch" value="1" />
</path>
<path name="crus-fw-preload-amp2">
<ctl name="R DSP1 Preload Switch" value="1" />
</path>
<!-- Firmware-switching Stage -->
<path name="crus-switch-fw-Calibration">
<ctl name="AMP PCM Gain" value="17" />
<ctl name="Digital PCM Volume" value="817" />
<ctl name="PCM Source" value="DSP" />
<ctl name="DSP1 Firmware" value="Calibration" />
<ctl name="R AMP PCM Gain" value="17" />
<ctl name="R Digital PCM Volume" value="817" />
<ctl name="R PCM Source" value="DSP" />
<ctl name="R DSP1 Firmware" value="Calibration" />
</path>
<path name="crus-switch-fw-Diagnostic">
<ctl name="AMP PCM Gain" value="17" />
<ctl name="Digital PCM Volume" value="817" />
<ctl name="PCM Source" value="DSP" />
<ctl name="DSP1 Firmware" value="Diagnostic" />
<ctl name="R AMP PCM Gain" value="17" />
<ctl name="R Digital PCM Volume" value="817" />
<ctl name="R PCM Source" value="DSP" />
<ctl name="R DSP1 Firmware" value="Diagnostic" />
</path>
<path name="crus-switch-fw-Protection">
<ctl name="PCM Source" value="DSP" />
<ctl name="DSP1 Firmware" value="Protection" />
<ctl name="R PCM Source" value="DSP" />
<ctl name="R DSP1 Firmware" value="Protection" />
</path>
<!-- DSP-initialization Stage -->
<path name="crus-dsp-pre-calibration-amp1">
<ctl name="Main AMP Enable Switch" value="1" />
</path>
<path name="crus-dsp-pre-calibration-amp2">
<ctl name="R Main AMP Enable Switch" value="1" />
</path>
<path name="crus-dsp-pre-calibration">
<path name="crus-dsp-pre-calibration-amp1" />
<path name="crus-dsp-pre-calibration-amp2" />
</path>
<path name="crus-dsp-pre-diagnostic-amp1">
<ctl name="Main AMP Enable Switch" value="1" />
</path>
<path name="crus-dsp-pre-diagnostic-amp2">
<ctl name="R Main AMP Enable Switch" value="1" />
</path>
<path name="crus-dsp-pre-diagnostic">
<path name="crus-dsp-pre-diagnostic-amp1" />
<path name="crus-dsp-pre-diagnostic-amp2" />
</path>
<path name="crus-dsp-pre-protection">
<ctl name="Main AMP Enable Switch" value="1" />
<ctl name="R Main AMP Enable Switch" value="1" />
</path>
<!-- Clock-trigger Stage -->
<path name="platform-controls">
<ctl name="PCM Playback Volume" value="1000"/>
<ctl name="SINK_IDS" id="0" value="0"/>
<ctl name="SINK_IDS" id="1" value="-1"/>
<ctl name="TDM_0_RX Mixer EP6" value="1"/>
</path>
<!-- Post loaded firmware -->
<path name="crus-dsp-post-loading-fw">
<ctl name="Main AMP Enable Switch" value="0" />
<ctl name="R Main AMP Enable Switch" value="0" />
</path>
<!-- Value & Information Fetch Stage -->
<path name="platform-values">
<ctl name="TDM_0_RX Format" />
<ctl name="TDM_0_RX Chan" />
<ctl name="TDM_0_RX Sample Rate" />
<ctl name="PCM Playback Volume" />
<ctl name="TDM_0_RX Mixer EP6" />
</path>
<path name="cs35l41-values">
<ctl name="DRE DRE Switch" />
<ctl name="R DRE DRE Switch" />
<ctl name="VBSTMON Output Switch" />
<ctl name="R VBSTMON Output Switch" />
<ctl name="AMP PCM Gain" />
<ctl name="R AMP PCM Gain" />
<ctl name="Digital PCM Volume" />
<ctl name="R Digital PCM Volume" />
<ctl name="PCM Source" />
<ctl name="R PCM Source" />
<ctl name="DSP Booted" />
<ctl name="R DSP Booted" />
<ctl name="Main AMP Enable Switch" />
<ctl name="R Main AMP Enable Switch" />
<ctl name="DSP1 Preload Switch" />
<ctl name="R DSP1 Preload Switch" />
<ctl name="DSP1 Firmware" />
<ctl name="R DSP1 Firmware" />
</path>
<!-- Note that the order of controls does matter because
it should be matched to the structure defined in
sp_cal_common.h -->
<!--
struct calibration_data {
unsigned int cal_r;
unsigned int cal_status;
unsigned int cal_checksum;
unsigned int cal_ambient;
unsigned int amp_pcm_gain;
unsigned int digital_pcm_gain;
};
-->
<path name="cs35l41-dsp-amp1-calibration-values">
<ctl name="DSP1 Calibration cd CAL_R" />
<ctl name="DSP1 Calibration cd CAL_STATUS" />
<ctl name="DSP1 Calibration cd CAL_CHECKSUM" />
<ctl name="DSP1 Calibration cd CAL_AMBIENT" />
<ctl name="AMP PCM Gain" />
<ctl name="Digital PCM Volume" />
<!-- Only for debug print -->
<ctl name="DSP1 Calibration cd CAL_SET_STATUS" />
</path>
<path name="cs35l41-dsp-amp2-calibration-values">
<ctl name="R DSP1 Calibration cd CAL_R" />
<ctl name="R DSP1 Calibration cd CAL_STATUS" />
<ctl name="R DSP1 Calibration cd CAL_CHECKSUM" />
<ctl name="R DSP1 Calibration cd CAL_AMBIENT" />
<ctl name="R AMP PCM Gain" />
<ctl name="R Digital PCM Volume" />
<!-- Only for debug print -->
<ctl name="R DSP1 Calibration cd CAL_SET_STATUS" />
</path>
<!--
struct diagnostic_data {
struct calibration_data calibration_data;
unsigned int z_low_diff;
unsigned int diag_f0;
unsigned int diag_f0_status;
};
-->
<path name="cs35l41-dsp-amp1-diagnostic-values">
<!-- struct calibration_data START -->
<ctl name="DSP1 Diagnostic cd CAL_R" />
<ctl name="DSP1 Diagnostic cd CAL_STATUS" />
<ctl name="DSP1 Diagnostic cd CAL_CHECKSUM" />
<ctl name="DSP1 Diagnostic cd CAL_AMBIENT" />
<ctl name="AMP PCM Gain" />
<ctl name="Digital PCM Volume" />
<!-- struct calibration_data END -->
<ctl name="DSP1 Diagnostic cd DIAG_Z_LOW_DIFF" />
<ctl name="DSP1 Diagnostic cd DIAG_F0" />
<ctl name="DSP1 Diagnostic cd DIAG_F0_STATUS" />
<!-- Only for debug print -->
<ctl name="DSP1 Diagnostic cd CAL_SET_STATUS" />
</path>
<path name="cs35l41-dsp-amp2-diagnostic-values">
<!-- struct calibration_data START -->
<ctl name="R DSP1 Diagnostic cd CAL_R" />
<ctl name="R DSP1 Diagnostic cd CAL_STATUS" />
<ctl name="R DSP1 Diagnostic cd CAL_CHECKSUM" />
<ctl name="R DSP1 Diagnostic cd CAL_AMBIENT" />
<ctl name="R AMP PCM Gain" />
<ctl name="R Digital PCM Volume" />
<!-- struct calibration_data END -->
<ctl name="R DSP1 Diagnostic cd DIAG_Z_LOW_DIFF" />
<ctl name="R DSP1 Diagnostic cd DIAG_F0" />
<ctl name="R DSP1 Diagnostic cd DIAG_F0_STATUS" />
<!-- Only for debug print -->
<ctl name="R DSP1 Diagnostic cd CAL_SET_STATUS" />
</path>
<path name="cs35l41-dsp-amp1-protection-values">
<!-- struct calibration_data START -->
<ctl name="DSP1 Protection cd CAL_R" />
<ctl name="DSP1 Protection cd CAL_STATUS" />
<ctl name="DSP1 Protection cd CAL_CHECKSUM" />
<ctl name="DSP1 Protection cd CAL_AMBIENT" />
<!-- These controls are unrelated so we can simply
skip them
<ctl name="AMP PCM Gain" />
<ctl name="Digital PCM Volume" />
-->
<!-- struct calibration_data END -->
</path>
<path name="cs35l41-dsp-amp2-protection-values">
<!-- struct calibration_data START -->
<ctl name="R DSP1 Protection cd CAL_R" />
<ctl name="R DSP1 Protection cd CAL_STATUS" />
<ctl name="R DSP1 Protection cd CAL_CHECKSUM" />
<ctl name="R DSP1 Protection cd CAL_AMBIENT" />
<!-- These controls are unrelated so we can simply
skip them
<ctl name="R AMP PCM Gain" />
<ctl name="R Digital PCM Volume" />
-->
<!-- struct calibration_data END -->
</path>
<path name="cs35l41-dsp-amp1-calibration-completion">
<ctl name="DSP1 Calibration cd CAL_STATUS" />
</path>
<path name="cs35l41-dsp-amp2-calibration-completion">
<ctl name="R DSP1 Calibration cd CAL_STATUS" />
</path>
<path name="cs35l41-dsp-amp1-protection-completion">
<ctl name="DSP1 Protection cd CAL_SET_STATUS" />
</path>
<path name="cs35l41-dsp-amp2-protection-completion">
<ctl name="R DSP1 Protection cd CAL_SET_STATUS" />
</path>
<path name="cs35l41-dsp-amp1-diagnostic-completion">
<ctl name="DSP1 Diagnostic cd CAL_STATUS" />
<ctl name="DSP1 Diagnostic cd DIAG_F0_STATUS" />
</path>
<path name="cs35l41-dsp-amp2-diagnostic-completion">
<ctl name="R DSP1 Diagnostic cd CAL_STATUS" />
<ctl name="R DSP1 Diagnostic cd DIAG_F0_STATUS" />
</path>
<path name="cs35l41-dsp-amp1-enable-status">
<ctl name="Main AMP Enable Switch" />
</path>
<path name="cs35l41-dsp-amp2-enable-status">
<ctl name="R Main AMP Enable Switch" />
</path>
</mixer>

View file

@ -1,302 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<template>
<modules>
<module id="2" name="Waves">
<param id="0" max="3" name="opMode_" type="uint32"/>
</module>
<module id="3" name="Forte">
<param id="0" max="3" name="opMode_" type="uint32"/>
</module>
<module id="5" name="Auto Gain Control">
<param default="0" id="0" max="3" name="opMode_" type="uint32"/>
<param default="48000" id="1" name="fs_" type="uint32"/>
<param default="1" id="2" name="numCh_" type="uint32"/>
<param default="1" id="3" name="chMask_" type="uint32"/>
<param id="16" name="GainApplied" type="float"/>
<param id="17" name="idealRMS" type="float"/>
<param id="18" name="noiseGate" type="float"/>
<param id="19" name="minGain" type="float"/>
<param id="20" name="maxGain" type="float"/>
<param id="21" name="longGainAtRt" type="uint32"/>
<param id="22" name="GainAtRt" type="uint32"/>
<param id="23" name="rmsTav" type="uint32"/>
</module>
<module id="6" name="Surround Record">
<param default="0" id="0" max="3" name="opMode_" type="uint32"/>
<param default="48000" id="1" name="fs_" type="uint32"/>
<param default="3" id="2" name="numCh_" type="uint32"/>
<param default="7" id="3" name="chMask_" type="uint32"/>
<param id="16" max="1" min="0" name="alpha" type="float"/>
<param complex="true" id="17" name="ch0_profileL" size="1024" type="float"/>
<param complex="true" id="18" name="ch1_profileL" size="1024" type="float"/>
<param complex="true" id="19" name="ch2_profileL" size="1024" type="float"/>
<param complex="true" id="20" name="ch0_profileR" size="1024" type="float"/>
<param complex="true" id="21" name="ch1_profileR" size="1024" type="float"/>
<param complex="true" id="22" name="ch2_profileR" size="1024" type="float"/>
<param complex="true" id="23" name="ch0_profileAZ" size="1024" type="float"/>
<param complex="true" id="24" name="ch1_profileAZ" size="1024" type="float"/>
<param complex="true" id="25" name="ch2_profileAZ" size="1024" type="float"/>
<struct id="26">
<param default="1" name="ch_gain" type="float"/>
<param default="1" name="zoom_gain" type="float"/>
</struct>
<param default="0" id="27" name="ch0_assignFrom" type="int32"/>
<param default="1" id="28" name="ch1_assignFrom" type="int32"/>
<param default="2" id="29" name="ch2_assignFrom" type="int32"/>
<param default="0.333" id="30" max="1" min="0.01" name="alphaEnhancedRate" type="float"/>
</module>
<module id="7" name="Multi Channel IIR 2">
<param default="0" id="0" max="3" name="opMode_" type="uint32"/>
<param default="48000" id="1" name="fs_" type="uint32"/>
<param default="3" id="2" name="numCh_" type="uint32"/>
<param default="1" id="3" name="chMask_" type="uint32"/>
<param default="3" id="16" max="3" min="1" name="numOfChannel" type="uint32"/>
<param id="17" name="coeff" size="300" type="float"/>
<struct id="18">
<param max="18" min="-96" name="gain" size="60" type="float"/>
<param max="24000" min="0" name="frequency" size="60" type="uint32"/>
<param max="200" min="0" name="qfactor" size="60" type="float"/>
<param default="4" name="type" size="60" type="int32"/>
</struct>
</module>
<module id="8" name="Multi Band DRC">
<param default="0" id="0" max="3" name="opMode_" type="uint32"/>
<param default="48000" id="1" name="fs_" type="uint32"/>
<param default="2" id="2" name="numCh_" type="uint32"/>
<param default="3" id="3" name="chMask_" type="uint32"/>
<struct id="16">
<param default="1" max="3" min="1" name="numBand" type="uint32"/>
<param name="IIR_LowPass1" size="5" type="float"/>
<param name="IIR_HighPass1" size="5" type="float"/>
<param name="IIR_LowPass2" size="5" type="float"/>
<param name="IIR_HighPass2" size="5" type="float"/>
</struct>
<struct id="17">
<param max="20" min="0" name="band0_delay_ms" type="float"/>
<param default="5" max="20" min="0" minInclusive="false" name="band0_rms_ms" type="float"/>
<param max="30" min="0" name="band0_gain_dB" type="float"/>
<param max="30" min="-30" name="band0_Min_Gain_dB" type="float"/>
<param default="1" max="3" min="1" name="band0_numOfKnee" type="uint32"/>
<param name="band0_threadhold_dB" size="3" type="float"/>
<param name="band0_compressRatio" size="4" type="float"/>
<param name="band0_kneeWidth" size="3" type="float"/>
<param name="band0_attackTime_ms" size="4" type="float"/>
<param name="band0_releaseTime_ms" size="4" type="float"/>
<param name="band0_hysteresis" size="4" type="float"/>
<param max="20" min="0" name="band1_delay_ms" type="float"/>
<param default="5" max="20" min="0" minInclusive="false" name="band1_rms_ms" type="float"/>
<param max="30" min="0" name="band1_gain_dB" type="float"/>
<param max="30" min="-30" name="band1_Min_Gain_dB" type="float"/>
<param default="1" max="3" min="1" name="band1_numOfKnee" type="uint32"/>
<param name="band1_threadhold_dB" size="3" type="float"/>
<param name="band1_compressRatio" size="4" type="float"/>
<param name="band1_kneeWidth" size="3" type="float"/>
<param name="band1_attackTime_ms" size="4" type="float"/>
<param name="band1_releaseTime_ms" size="4" type="float"/>
<param name="band1_hysteresis" size="4" type="float"/>
<param max="20" min="0" name="band2_delay_ms" type="float"/>
<param default="5" max="20" min="0" minInclusive="false" name="band2_rms_ms" type="float"/>
<param max="30" min="0" name="band2_gain_dB" type="float"/>
<param max="30" min="-30" name="band2_Min_Gain_dB" type="float"/>
<param default="1" max="3" min="1" name="band2_numOfKnee" type="uint32"/>
<param name="band2_threadhold_dB" size="3" type="float"/>
<param name="band2_compressRatio" size="4" type="float"/>
<param name="band2_kneeWidth" size="3" type="float"/>
<param name="band2_attackTime_ms" size="4" type="float"/>
<param name="band2_releaseTime_ms" size="4" type="float"/>
<param name="band2_hysteresis" size="4" type="float"/>
</struct>
<struct id="18">
<param max="30" min="-30" name="limiter_gain_dB" type="float"/>
<param max="0" min="-30" name="limiter_threadhold_dB" type="float"/>
<param max="100" min="0" name="limiter_attackTime_ms" type="float"/>
<param max="100" min="0" name="limiter_releaseTime_ms" type="float"/>
</struct>
<struct id="19">
<param name="frequency0" type="uint32"/>
<param name="frequency1" type="uint32"/>
</struct>
</module>
<module id="11" name="Stationary Noise Suppression">
<param default="0" id="0" max="3" name="opMode_" type="uint32"/>
<param default="48000" id="1" name="fs_" type="uint32"/>
<param default="2" id="2" name="numCh_" type="uint32"/>
<param default="3" id="3" name="chMask_" type="uint32"/>
<param default="1" id="16" name="strength level" type="uint32"/>
<param id="17" name="POWER_TIME_SMOOTH" type="float"/>
<param id="18" name="RMS_TIME_SMOOTH" type="float"/>
<param id="19" name="LOWER_BAND_THRESHOLD" size="257" type="float"/>
<param id="20" name="UPPER_BAND_THRESHOLD" size="3" type="float"/>
<param id="21" name="ATTACK_TIME" type="float"/>
<param id="22" name="RELEASE_TIME" type="float"/>
<param id="23" name="BIN_THRESHOLD" size="5" type="uint32"/>
</module>
<module id="14" name="Linear Gain">
<param default="0" id="0" max="3" name="opMode_" type="uint32"/>
<param default="48000" id="1" name="fs_" type="uint32"/>
<param default="1" id="2" name="numCh_" type="uint32"/>
<param default="1" id="3" name="chMask_" type="uint32"/>
<param id="16" name="Simple_gain" type="float"/>
<param default="0" id="17" name="ch0_assignFrom" type="int32"/>
<param default="1" id="18" name="ch1_assignFrom" type="int32"/>
<param default="2" id="19" name="ch2_assignFrom" type="int32"/>
</module>
<module id="17" name="Wind Noise Reduction">
<param default="0" id="0" max="3" name="opMode_" type="uint32"/>
<param default="48000" id="1" name="fs_" type="uint32"/>
<param default="2" id="2" name="numCh_" type="uint32"/>
<param default="3" id="3" name="chMask_" type="uint32"/>
<param default="450" id="16" name="DECISION_SMOOTHING_FACTOR" type="int32"/>
<param default="50" id="17" name="DECISION_ATTACK_SMOOTHING_FACTOR" type="int32"/>
<param default="50" id="18" name="DECISION_RELEASE_HIGH_SMOOTHING_FACTOR" type="int32"/>
<param default="50" id="19" name="DECISION_RELEASE_LOW_SMOOTHING_FACTOR" type="int32"/>
<param default="700" id="20" name="DECISION_RELEASE_THRESHOLD" type="int32"/>
<param default="0" id="21" name="DECISION_RANGE_OFFSET_FACTOR" type="int32"/>
<param default="1000" id="22" name="DECISION_RANGE_SLOPE_FACTOR" type="int32"/>
<param default="450" id="23" name="DECISION_GAIN_SMOOTHING_FACTOR" type="int32"/>
<param default="27" id="24" name="DECISION_DB_RANGE" type="int32"/>
<param default="1000" id="25" name="MASTER_REDUCTION_FACTOR" type="int32"/>
<param default="15" id="26" name="KEEP_NUM_OF_PREV_DECISIONS" type="int32"/>
<param default="1000" id="27" name="DEC_PRE_GAIN" type="int32"/>
<param default="16000" id="28" name="SUP_PRE_GAIN" type="int32"/>
<param default="2" id="29" name="COHERENCE_ENABLE" type="int32"/>
<param default="1" id="30" name="COHERENCE_START_BIN" type="int32"/>
<param default="10" id="31" name="COHERENCE_END_BIN" type="int32"/>
<param default="300" id="32" name="COHERENCE_THRESHOLD" type="int32"/>
<param default="990" id="33" name="COHERENCE_FORGETTING_FACTOR" type="int32"/>
<param default="0" id="34" name="DB_SCALING_FACTOR" type="int32"/>
<param default="9" id="35" name="SEP_LAYER" type="int32"/>
<param default="1" id="36" name="SP_GAIN_ENABLE" type="int32"/>
<param default="15" id="37" name="SP_GAIN_MAX_BIN" type="int32"/>
<param default="500" id="38" name="SP_GAIN_MIN" type="int32"/>
<param default="200" id="39" name="SP_GAIN_TH_MIN" type="int32"/>
<param default="450" id="40" name="SP_GAIN_TH_MAX" type="int32"/>
<param default="800" id="41" name="SP_GAIN_SMOOTH" type="int32"/>
<param default="3" id="42" name="SP_GAIN_FREQ_SMOOTH" type="int32"/>
<param default="300" id="43" name="MASTER_MAX_SUP_SMOOTHING_FACTOR" type="int32"/>
<param default="1" id="44" name="GAIN_FREQ_SMOOTH" type="int32"/>
<param default="2" id="45" name="GMIN_CURVE_TYPE" type="int32"/>
<param default="55" id="46" name="GMIN_LINEAR_SPLIT_MID_POINT_BINR" type="int32"/>
<param default="330" id="47" name="GMIN_LINEAR_SPLIT_MID_POINT_VAL" type="int32"/>
<param default="1000" id="48" name="SP_OVERSUB_RATIO" type="int32"/>
<param default="16" id="49" name="WIND_ENERGY_EST_COMPENSATION_GAIN" type="int32"/>
<param default="2000" id="50" name="WIND_ENERGY_CURVE_SLOPE" type="int32"/>
<param default="300" id="51" name="WIND_ENERGY_CURVE_OFFSET" type="int32"/>
<param default="16000" id="52" name="WIND_ENERGY_CURVE_MIN" type="int32"/>
<param default="16000" id="53" name="WIND_ENERGY_CURVE_MAX" type="int32"/>
<param default="900" id="54" name="WIND_ENERGY_SMOOTHING" type="int32"/>
<param default="144" id="55" name="WIND_ENERGY_NORM_DENOM" type="int32"/>
<param default="600" id="56" name="WIND_ENERGY_CURVE_SCALED_TH_MIN" type="int32"/>
<param default="900" id="57" name="WIND_ENERGY_CURVE_SCALED_TH_MAX" type="int32"/>
<param default="1" id="58" name="ENABLE_ML_COMBI_WIND_ENERGY" type="int32"/>
<param default="1" id="59" name="ENABLE_SP_COMBI_WIND_ENERGY" type="int32"/>
<param default="1" id="60" name="ENALBE_SP_COMBI_OVERSUBTRACTION" type="int32"/>
<param default="1" id="61" name="ENABLE_PRIORI_SNR" type="int32"/>
<param default="1000" id="62" name="PRIORI_SNR_ML_TUNING" type="int32"/>
<param default="15" id="63" name="DEC_PREV_NUM" type="int32"/>
<param default="1" id="64" name="SSC_ENABLE" type="int32"/>
<param default="930" id="65" name="SSC_SOFT_SMOOTHING_FACTOR" type="int32"/>
<param default="1600" id="66" name="SSC_OVERDRIVE" type="int32"/>
<param default="3" id="67" name="SSC_MIN_FREQ" type="int32"/>
<param default="130" id="68" name="SSC_MAX_FREQ" type="int32"/>
<param default="700" id="69" name="SSC_PSD_SMOOTHING_FACTOR" type="int32"/>
<param default="12" id="70" name="SSC_SOFT_DECISION_MIN_FREQ" type="int32"/>
<param default="450" id="71" name="SSC_SOFT_DECISION_MAX_FREQ" type="int32"/>
<param default="5" id="72" name="SSC_KEEP_SAVED_PROB_SMOOTH_SIZE" type="int32"/>
<param default="1000" id="73" name="GAIN_BOOSTING_COST" type="int32"/>
<param default="450" id="74" name="GAIN_SMOOTHING_FACTOR" type="int32"/>
<param default="150" id="75" name="FINAL_GAIN_SMOOTHING_OFFSET_FACTOR" type="int32"/>
<param default="1" id="76" name="MUL_CH_SPEC_DIFF_ENABLE" type="int32"/>
<param default="4" id="77" name="MUL_CH_SPEC_DIFF_CENTER_SPEC_SEL" type="int32"/>
<param default="1000" id="78" name="MUL_CH_SPEC_DIFF_WIENER_OVERDRIVE" type="int32"/>
<param default="2" id="79" name="MUL_CH_SPEC_DIFF_GAIN_COMB" type="int32"/>
<param default="900" id="80" name="MUL_CH_SPEC_DIFF_TIME_SMOOTH" type="int32"/>
</module>
<module id="18" name="Multi Channel IIR 1">
<param default="0" id="0" max="3" name="opMode_" type="uint32"/>
<param default="48000" id="1" name="fs_" type="uint32"/>
<param default="2" id="2" name="numCh_" type="uint32"/>
<param default="3" id="3" name="chMask_" type="uint32"/>
<param default="3" id="16" max="3" min="1" name="numOfChannel" type="uint32"/>
<param id="17" name="coeff" size="300" type="float"/>
<struct id="18">
<param max="18" min="-96" name="gain" size="60" type="float"/>
<param max="24000" min="0" name="frequency" size="60" type="uint32"/>
<param max="200" min="0" name="qfactor" size="60" type="float"/>
<param default="4" name="type" size="60" type="int32"/>
</struct>
</module>
<module id="32" name="Single Band DRC">
<param default="1" id="0" max="3" name="opMode_" type="uint32"/>
<param default="48000" id="1" name="fs_" type="uint32"/>
<param default="2" id="2" name="numCh_" type="uint32"/>
<param default="3" id="3" name="chMask_" type="uint32"/>
<struct id="16">
<param max="20" min="0" name="delay_ms" type="float"/>
<param default="5" max="20" min="0" minInclusive="false" name="rms_ms" type="float"/>
<param max="30" min="0" name="gain_dB" type="float"/>
<param max="30" min="-30" name="Min_Gain_dB" type="float"/>
<param default="1" max="3" min="1" name="numOfKnee" type="uint32"/>
<param name="threadhold_dB" size="3" type="float"/>
<param name="compressRatio" size="4" type="float"/>
<param name="kneeWidth" size="3" type="float"/>
<param name="attackTime_ms" size="4" type="float"/>
<param name="releaseTime_ms" size="4" type="float"/>
<param name="hysteresis" size="4" type="float"/>
<param default="0" max="1" min="0" name="rms_manual_enable" type="uint32"/>
<param default="0" max="2" min="0" name="rms_channel" type="uint32"/>
</struct>
<struct id="17">
<param max="30" min="-30" name="limiter_gain_dB" type="float"/>
<param max="0" min="-30" name="limiter_threadhold_dB" type="float"/>
<param max="100" min="0" name="limiter_attackTime_ms" type="uint32"/>
<param max="100" min="0" name="limiter_releaseTime_ms" type="uint32"/>
</struct>
</module>
<module id="10000" name="Eraser">
<param id="275" name="eraser_pre_gain" type="uint32"/>
<param id="277" name="eraser_post_gain" type="uint32"/>
<param id="279" name="non_eraser_gain" type="uint32"/>
</module>
<module id="10001" name="Cleaner">
<param id="299" name="cleaner_post_gain" type="uint32"/>
</module>
<module id="10002" name="CHRE">
<param id="297" name="chre_gain" type="uint32"/>
<param id="345" name="chre_aec_timeout" type="uint32"/>
<param id="346" name="chre_pdm_gain" type="int32"/>
<param id="347" name="chre_aec_gain" type="int32"/>
</module>
</modules>
<signalflows>
<signalflow id="1" name="Spatial Audio">
<block id="128">
<moduleRef id="18"/>
<moduleRef id="17"/>
</block>
<block id="134">
<moduleRef id="14"/>
<moduleRef id="11"/>
<moduleRef id="6"/>
<moduleRef id="7"/>
<moduleRef id="5"/>
<moduleRef id="8"/>
</block>
</signalflow>
<signalflow id="2" name="General Mic Recording">
<block id="137">
<moduleRef id="14"/>
<moduleRef id="7"/>
<moduleRef id="5"/>
<moduleRef id="8"/>
</block>
</signalflow>
<signalflow id="1000" name="Smart Feature">
<block id="0">
<moduleRef id="10000"/>
<moduleRef id="10001"/>
<moduleRef id="10002"/>
</block>
</signalflow>
</signalflows>
</template>

File diff suppressed because it is too large Load diff

File diff suppressed because it is too large Load diff

File diff suppressed because it is too large Load diff

File diff suppressed because it is too large Load diff

File diff suppressed because it is too large Load diff

View file

@ -1,58 +0,0 @@
########################################################################################################
# (Optional) The supported features list for platform vendors to query from.
# Platform vendors should call maxxaudio_qdsp_is_feature_supported with a string to query from the list.
# This config has no effect in the MaxxAudioQdspHalController. It's only meaningful for platform vendors.
# Putting any value other than 1 would be equivalent to not supported.
########################################################################################################
[HAL_SUPPORTED_FEATURES]
CUSTOM_ACTION_256=1
########################################################################################################
# This defined the options of supported sample rates.
# This can be configured by Waves or platform vendor.
########################################################################################################
[HAL_SUPPORTED_SAMPLE_RATES]
SR_COMMON = 48000
########################################################################################################
# (Optional) The subtypes that applies to different angles(0, 90, 180, 270). Can be empty if not applicable.
# This can be configured by Waves or platform vendor.
########################################################################################################
[HAL_ORIENTATION_SUBTYPES]
OST_SPEAKER = 0:12,90:13,180:12,270:0|13
########################################################################################################
# This defines available preset configurations.
# This should be configured by Waves only unless platform vendor is familiar with MPS structure.
########################################################################################################
[HAL_SUPPORTED_PRESETS]
SPEAKER_MUSIC = OM:1,SM:2,OST:OST_SPEAKER
SPEAKER_SAFE_MUSIC = OM:10,SM:2,OST:OST_SPEAKER
SPEAKER_SAFE_CALL = OM:10,SM:2,OST:OST_SPEAKER
HEADSET_MUSIC = OM:2,SM:2
########################################################################################################
# This defines available CONTROL configurations. Only define the CONTROL if you need it.
# The numbers could vary from device to device.
# This can be configured by Waves or platform vendor.
########################################################################################################
[HAL_SUPPORTED_CONTROLS]
SPEAKER_INSTANCE = INSTANCE:1,DEV:0,SR:SR_COMMON,PRESET:SPEAKER_MUSIC|SPEAKER_SAFE_MUSIC|SPEAKER_SAFE_CALL
A2DP_INSTANCE = INSTANCE:2,DEV:0,SR:SR_COMMON,PRESET:HEADSET_MUSIC
USB_HEADPHONE_INSTANCE = INSTANCE:4,DEV:0,SR:SR_COMMON,PRESET:HEADSET_MUSIC
[COEFS_CONVERTER_SETTING]
AlgFxPath=/vendor/lib/libAlgFx_HiFi3z.so
AlgFxPath64=/vendor/lib64/libAlgFx_HiFi3z.so
# do not modify the following if not necessary
#AudioFormatType=0
#AudioFormatChannels=2
#AudioFormatSampleRate=48000
#AudioFormatBitsPerSample=32
#AudioFormatSampleSize=4
#AudioFormatIncrement=8
[CUSTOM_ACTION_256]
CASE_1=PRIORITY:0,NUMBERS:2:0|1,PRESET:SPEAKER_MUSIC
CASE_2=PRIORITY:1,NUMBERS:1|2|4194304:2|3|4,PRESET:SPEAKER_SAFE_CALL
CASE_3=PRIORITY:2,NUMBERS:1|4194304:0|1,PRESET:SPEAKER_SAFE_MUSIC

View file

@ -60,29 +60,6 @@ PRODUCT_COPY_FILES += \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/tuning/waves/waves_config.ini:$(TARGET_COPY_OUT_VENDOR)/etc/waves_config.ini \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/tuning/waves/waves_preset.mps:$(TARGET_COPY_OUT_VENDOR)/etc/waves_preset.mps
# userdebug specific
ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_COPY_FILES += \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/tuning/fortemedia/BLUETOOTH.mods:$(TARGET_COPY_OUT_VENDOR)/etc/aoc/BLUETOOTH.mods \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/tuning/fortemedia/HANDSFREE.mods:$(TARGET_COPY_OUT_VENDOR)/etc/aoc/HANDSFREE.mods \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/tuning/fortemedia/HANDSET.mods:$(TARGET_COPY_OUT_VENDOR)/etc/aoc/HANDSET.mods \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/tuning/fortemedia/HEADSET.mods:$(TARGET_COPY_OUT_VENDOR)/etc/aoc/HEADSET.mods
#Bluenote files
PRODUCT_COPY_FILES += \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/tuning/bluenote/template.xml:$(TARGET_COPY_OUT_VENDOR)/etc/aoc/template.xml \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/tuning/bluenote/tuning_constraints_combination.xml:$(TARGET_COPY_OUT_VENDOR)/etc/aoc/tuning_constraints_combination.xml
# Mixer Path Configuration for Audio Speaker Calibration Tool crus_sp_cal
PRODUCT_COPY_FILES += \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/cs35l41/crus_sp_cal_mixer_paths.xml:$(TARGET_COPY_OUT_VENDOR)/etc/crus_sp_cal_mixer_paths.xml
PRODUCT_COPY_FILES += \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/tuning/waves/tests/test_config.ini:$(TARGET_COPY_OUT_VENDOR)/etc/test_config.ini \
device/google/shusky/audio/$(AUDIO_TABLE_FOLDER)/tuning/waves/tests/test_preset.mps:$(TARGET_COPY_OUT_VENDOR)/etc/test_preset.mps
endif
ifeq ($(USE_AUDIO_HAL_AIDL),true)
# Offload spatializer config
PRODUCT_COPY_FILES += \

View file

@ -1,315 +0,0 @@
<?xml version="1.0" encoding="ISO-8859-1"?>
<!-- Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. -->
<!-- -->
<!-- Redistribution and use in source and binary forms, with or without -->
<!-- modification, are permitted provided that the following conditions are -->
<!-- met: -->
<!-- * Redistributions of source code must retain the above copyright -->
<!-- notice, this list of conditions and the following disclaimer. -->
<!-- * Redistributions in binary form must reproduce the above -->
<!-- copyright notice, this list of conditions and the following -->
<!-- disclaimer in the documentation and/or other materials provided -->
<!-- with the distribution. -->
<!-- * Neither the name of The Linux Foundation nor the names of its -->
<!-- contributors may be used to endorse or promote products derived -->
<!-- from this software without specific prior written permission. -->
<!-- -->
<!-- THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -->
<!-- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
<!-- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -->
<!-- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -->
<!-- BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -->
<!-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -->
<!-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -->
<!-- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -->
<!-- OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -->
<!-- IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -->
<mixer>
<!-- Initial Values -->
<!-- Preload Stage -->
<ctl name="Main AMP Enable Switch" value="0" />
<ctl name="DSP1 Preload Switch" value="0" />
<ctl name="R Main AMP Enable Switch" value="0" />
<ctl name="R DSP1 Preload Switch" value="0" />
<!-- Clock-trigger Stage -->
<ctl name="SINK_IDS" id="0" value="-1"/>
<ctl name="SINK_IDS" id="1" value="-1"/>
<ctl name="PCM Playback Volume" value="10"/>
<ctl name="TDM_0_RX Mixer EP6" value="0"/>
<!-- Preparation Stage -->
<path name="crus-switch-fw-prepare">
<ctl name="DRE DRE Switch" value="1" />
<ctl name="VBSTMON Output Switch" value="1" />
<ctl name="DSP Booted" value="0" />
<ctl name="DSP1 Preload Switch" value="0" />
<ctl name="R DRE DRE Switch" value="1" />
<ctl name="R VBSTMON Output Switch" value="1" />
<ctl name="R DSP Booted" value="0" />
<ctl name="R DSP1 Preload Switch" value="0" />
</path>
<!-- Preload Stage -->
<path name="crus-fw-preload">
<ctl name="DSP1 Preload Switch" value="1" />
<ctl name="R DSP1 Preload Switch" value="1" />
</path>
<path name="crus-fw-preload-amp1">
<ctl name="DSP1 Preload Switch" value="1" />
</path>
<path name="crus-fw-preload-amp2">
<ctl name="R DSP1 Preload Switch" value="1" />
</path>
<!-- Firmware-switching Stage -->
<path name="crus-switch-fw-Calibration">
<ctl name="AMP PCM Gain" value="17" />
<ctl name="Digital PCM Volume" value="817" />
<ctl name="PCM Source" value="DSP" />
<ctl name="DSP1 Firmware" value="Calibration" />
<ctl name="R AMP PCM Gain" value="17" />
<ctl name="R Digital PCM Volume" value="817" />
<ctl name="R PCM Source" value="DSP" />
<ctl name="R DSP1 Firmware" value="Calibration" />
</path>
<path name="crus-switch-fw-Diagnostic">
<ctl name="AMP PCM Gain" value="17" />
<ctl name="Digital PCM Volume" value="817" />
<ctl name="PCM Source" value="DSP" />
<ctl name="DSP1 Firmware" value="Diagnostic" />
<ctl name="R AMP PCM Gain" value="17" />
<ctl name="R Digital PCM Volume" value="817" />
<ctl name="R PCM Source" value="DSP" />
<ctl name="R DSP1 Firmware" value="Diagnostic" />
</path>
<path name="crus-switch-fw-Protection">
<ctl name="PCM Source" value="DSP" />
<ctl name="DSP1 Firmware" value="Protection" />
<ctl name="R PCM Source" value="DSP" />
<ctl name="R DSP1 Firmware" value="Protection" />
</path>
<!-- DSP-initialization Stage -->
<path name="crus-dsp-pre-calibration-amp1">
<ctl name="Main AMP Enable Switch" value="1" />
</path>
<path name="crus-dsp-pre-calibration-amp2">
<ctl name="R Main AMP Enable Switch" value="1" />
</path>
<path name="crus-dsp-pre-calibration">
<path name="crus-dsp-pre-calibration-amp1" />
<path name="crus-dsp-pre-calibration-amp2" />
</path>
<path name="crus-dsp-pre-diagnostic-amp1">
<ctl name="Main AMP Enable Switch" value="1" />
</path>
<path name="crus-dsp-pre-diagnostic-amp2">
<ctl name="R Main AMP Enable Switch" value="1" />
</path>
<path name="crus-dsp-pre-diagnostic">
<path name="crus-dsp-pre-diagnostic-amp1" />
<path name="crus-dsp-pre-diagnostic-amp2" />
</path>
<path name="crus-dsp-pre-protection">
<ctl name="Main AMP Enable Switch" value="1" />
<ctl name="R Main AMP Enable Switch" value="1" />
</path>
<!-- Clock-trigger Stage -->
<path name="platform-controls">
<ctl name="PCM Playback Volume" value="1000"/>
<ctl name="SINK_IDS" id="0" value="0"/>
<ctl name="SINK_IDS" id="1" value="-1"/>
<ctl name="TDM_0_RX Mixer EP6" value="1"/>
</path>
<!-- Post loaded firmware -->
<path name="crus-dsp-post-loading-fw">
<ctl name="Main AMP Enable Switch" value="0" />
<ctl name="R Main AMP Enable Switch" value="0" />
</path>
<!-- Value & Information Fetch Stage -->
<path name="platform-values">
<ctl name="TDM_0_RX Format" />
<ctl name="TDM_0_RX Chan" />
<ctl name="TDM_0_RX Sample Rate" />
<ctl name="PCM Playback Volume" />
<ctl name="TDM_0_RX Mixer EP6" />
</path>
<path name="cs35l41-values">
<ctl name="DRE DRE Switch" />
<ctl name="R DRE DRE Switch" />
<ctl name="VBSTMON Output Switch" />
<ctl name="R VBSTMON Output Switch" />
<ctl name="AMP PCM Gain" />
<ctl name="R AMP PCM Gain" />
<ctl name="Digital PCM Volume" />
<ctl name="R Digital PCM Volume" />
<ctl name="PCM Source" />
<ctl name="R PCM Source" />
<ctl name="DSP Booted" />
<ctl name="R DSP Booted" />
<ctl name="Main AMP Enable Switch" />
<ctl name="R Main AMP Enable Switch" />
<ctl name="DSP1 Preload Switch" />
<ctl name="R DSP1 Preload Switch" />
<ctl name="DSP1 Firmware" />
<ctl name="R DSP1 Firmware" />
</path>
<!-- Note that the order of controls does matter because
it should be matched to the structure defined in
sp_cal_common.h -->
<!--
struct calibration_data {
unsigned int cal_r;
unsigned int cal_status;
unsigned int cal_checksum;
unsigned int cal_ambient;
unsigned int amp_pcm_gain;
unsigned int digital_pcm_gain;
};
-->
<path name="cs35l41-dsp-amp1-calibration-values">
<ctl name="DSP1 Calibration cd CAL_R" />
<ctl name="DSP1 Calibration cd CAL_STATUS" />
<ctl name="DSP1 Calibration cd CAL_CHECKSUM" />
<ctl name="DSP1 Calibration cd CAL_AMBIENT" />
<ctl name="AMP PCM Gain" />
<ctl name="Digital PCM Volume" />
<!-- Only for debug print -->
<ctl name="DSP1 Calibration cd CAL_SET_STATUS" />
</path>
<path name="cs35l41-dsp-amp2-calibration-values">
<ctl name="R DSP1 Calibration cd CAL_R" />
<ctl name="R DSP1 Calibration cd CAL_STATUS" />
<ctl name="R DSP1 Calibration cd CAL_CHECKSUM" />
<ctl name="R DSP1 Calibration cd CAL_AMBIENT" />
<ctl name="R AMP PCM Gain" />
<ctl name="R Digital PCM Volume" />
<!-- Only for debug print -->
<ctl name="R DSP1 Calibration cd CAL_SET_STATUS" />
</path>
<!--
struct diagnostic_data {
struct calibration_data calibration_data;
unsigned int z_low_diff;
unsigned int diag_f0;
unsigned int diag_f0_status;
};
-->
<path name="cs35l41-dsp-amp1-diagnostic-values">
<!-- struct calibration_data START -->
<ctl name="DSP1 Diagnostic cd CAL_R" />
<ctl name="DSP1 Diagnostic cd CAL_STATUS" />
<ctl name="DSP1 Diagnostic cd CAL_CHECKSUM" />
<ctl name="DSP1 Diagnostic cd CAL_AMBIENT" />
<ctl name="AMP PCM Gain" />
<ctl name="Digital PCM Volume" />
<!-- struct calibration_data END -->
<ctl name="DSP1 Diagnostic cd DIAG_Z_LOW_DIFF" />
<ctl name="DSP1 Diagnostic cd DIAG_F0" />
<ctl name="DSP1 Diagnostic cd DIAG_F0_STATUS" />
<!-- Only for debug print -->
<ctl name="DSP1 Diagnostic cd CAL_SET_STATUS" />
</path>
<path name="cs35l41-dsp-amp2-diagnostic-values">
<!-- struct calibration_data START -->
<ctl name="R DSP1 Diagnostic cd CAL_R" />
<ctl name="R DSP1 Diagnostic cd CAL_STATUS" />
<ctl name="R DSP1 Diagnostic cd CAL_CHECKSUM" />
<ctl name="R DSP1 Diagnostic cd CAL_AMBIENT" />
<ctl name="R AMP PCM Gain" />
<ctl name="R Digital PCM Volume" />
<!-- struct calibration_data END -->
<ctl name="R DSP1 Diagnostic cd DIAG_Z_LOW_DIFF" />
<ctl name="R DSP1 Diagnostic cd DIAG_F0" />
<ctl name="R DSP1 Diagnostic cd DIAG_F0_STATUS" />
<!-- Only for debug print -->
<ctl name="R DSP1 Diagnostic cd CAL_SET_STATUS" />
</path>
<path name="cs35l41-dsp-amp1-protection-values">
<!-- struct calibration_data START -->
<ctl name="DSP1 Protection cd CAL_R" />
<ctl name="DSP1 Protection cd CAL_STATUS" />
<ctl name="DSP1 Protection cd CAL_CHECKSUM" />
<ctl name="DSP1 Protection cd CAL_AMBIENT" />
<!-- These controls are unrelated so we can simply
skip them
<ctl name="AMP PCM Gain" />
<ctl name="Digital PCM Volume" />
-->
<!-- struct calibration_data END -->
</path>
<path name="cs35l41-dsp-amp2-protection-values">
<!-- struct calibration_data START -->
<ctl name="R DSP1 Protection cd CAL_R" />
<ctl name="R DSP1 Protection cd CAL_STATUS" />
<ctl name="R DSP1 Protection cd CAL_CHECKSUM" />
<ctl name="R DSP1 Protection cd CAL_AMBIENT" />
<!-- These controls are unrelated so we can simply
skip them
<ctl name="R AMP PCM Gain" />
<ctl name="R Digital PCM Volume" />
-->
<!-- struct calibration_data END -->
</path>
<path name="cs35l41-dsp-amp1-calibration-completion">
<ctl name="DSP1 Calibration cd CAL_STATUS" />
</path>
<path name="cs35l41-dsp-amp2-calibration-completion">
<ctl name="R DSP1 Calibration cd CAL_STATUS" />
</path>
<path name="cs35l41-dsp-amp1-protection-completion">
<ctl name="DSP1 Protection cd CAL_SET_STATUS" />
</path>
<path name="cs35l41-dsp-amp2-protection-completion">
<ctl name="R DSP1 Protection cd CAL_SET_STATUS" />
</path>
<path name="cs35l41-dsp-amp1-diagnostic-completion">
<ctl name="DSP1 Diagnostic cd CAL_STATUS" />
<ctl name="DSP1 Diagnostic cd DIAG_F0_STATUS" />
</path>
<path name="cs35l41-dsp-amp2-diagnostic-completion">
<ctl name="R DSP1 Diagnostic cd CAL_STATUS" />
<ctl name="R DSP1 Diagnostic cd DIAG_F0_STATUS" />
</path>
<path name="cs35l41-dsp-amp1-enable-status">
<ctl name="Main AMP Enable Switch" />
</path>
<path name="cs35l41-dsp-amp2-enable-status">
<ctl name="R Main AMP Enable Switch" />
</path>
</mixer>

View file

@ -1,302 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<template>
<modules>
<module id="2" name="Waves">
<param id="0" max="3" name="opMode_" type="uint32"/>
</module>
<module id="3" name="Forte">
<param id="0" max="3" name="opMode_" type="uint32"/>
</module>
<module id="5" name="Auto Gain Control">
<param default="0" id="0" max="3" name="opMode_" type="uint32"/>
<param default="48000" id="1" name="fs_" type="uint32"/>
<param default="1" id="2" name="numCh_" type="uint32"/>
<param default="1" id="3" name="chMask_" type="uint32"/>
<param id="16" name="GainApplied" type="float"/>
<param id="17" name="idealRMS" type="float"/>
<param id="18" name="noiseGate" type="float"/>
<param id="19" name="minGain" type="float"/>
<param id="20" name="maxGain" type="float"/>
<param id="21" name="longGainAtRt" type="uint32"/>
<param id="22" name="GainAtRt" type="uint32"/>
<param id="23" name="rmsTav" type="uint32"/>
</module>
<module id="6" name="Surround Record">
<param default="0" id="0" max="3" name="opMode_" type="uint32"/>
<param default="48000" id="1" name="fs_" type="uint32"/>
<param default="3" id="2" name="numCh_" type="uint32"/>
<param default="7" id="3" name="chMask_" type="uint32"/>
<param id="16" max="1" min="0" name="alpha" type="float"/>
<param complex="true" id="17" name="ch0_profileL" size="1024" type="float"/>
<param complex="true" id="18" name="ch1_profileL" size="1024" type="float"/>
<param complex="true" id="19" name="ch2_profileL" size="1024" type="float"/>
<param complex="true" id="20" name="ch0_profileR" size="1024" type="float"/>
<param complex="true" id="21" name="ch1_profileR" size="1024" type="float"/>
<param complex="true" id="22" name="ch2_profileR" size="1024" type="float"/>
<param complex="true" id="23" name="ch0_profileAZ" size="1024" type="float"/>
<param complex="true" id="24" name="ch1_profileAZ" size="1024" type="float"/>
<param complex="true" id="25" name="ch2_profileAZ" size="1024" type="float"/>
<struct id="26">
<param default="1" name="ch_gain" type="float"/>
<param default="1" name="zoom_gain" type="float"/>
</struct>
<param default="0" id="27" name="ch0_assignFrom" type="int32"/>
<param default="1" id="28" name="ch1_assignFrom" type="int32"/>
<param default="2" id="29" name="ch2_assignFrom" type="int32"/>
<param default="0.333" id="30" max="1" min="0.01" name="alphaEnhancedRate" type="float"/>
</module>
<module id="7" name="Multi Channel IIR 2">
<param default="0" id="0" max="3" name="opMode_" type="uint32"/>
<param default="48000" id="1" name="fs_" type="uint32"/>
<param default="3" id="2" name="numCh_" type="uint32"/>
<param default="1" id="3" name="chMask_" type="uint32"/>
<param default="3" id="16" max="3" min="1" name="numOfChannel" type="uint32"/>
<param id="17" name="coeff" size="300" type="float"/>
<struct id="18">
<param max="18" min="-96" name="gain" size="60" type="float"/>
<param max="24000" min="0" name="frequency" size="60" type="uint32"/>
<param max="200" min="0" name="qfactor" size="60" type="float"/>
<param default="4" name="type" size="60" type="int32"/>
</struct>
</module>
<module id="8" name="Multi Band DRC">
<param default="0" id="0" max="3" name="opMode_" type="uint32"/>
<param default="48000" id="1" name="fs_" type="uint32"/>
<param default="2" id="2" name="numCh_" type="uint32"/>
<param default="3" id="3" name="chMask_" type="uint32"/>
<struct id="16">
<param default="1" max="3" min="1" name="numBand" type="uint32"/>
<param name="IIR_LowPass1" size="5" type="float"/>
<param name="IIR_HighPass1" size="5" type="float"/>
<param name="IIR_LowPass2" size="5" type="float"/>
<param name="IIR_HighPass2" size="5" type="float"/>
</struct>
<struct id="17">
<param max="20" min="0" name="band0_delay_ms" type="float"/>
<param default="5" max="20" min="0" minInclusive="false" name="band0_rms_ms" type="float"/>
<param max="30" min="0" name="band0_gain_dB" type="float"/>
<param max="30" min="-30" name="band0_Min_Gain_dB" type="float"/>
<param default="1" max="3" min="1" name="band0_numOfKnee" type="uint32"/>
<param name="band0_threadhold_dB" size="3" type="float"/>
<param name="band0_compressRatio" size="4" type="float"/>
<param name="band0_kneeWidth" size="3" type="float"/>
<param name="band0_attackTime_ms" size="4" type="float"/>
<param name="band0_releaseTime_ms" size="4" type="float"/>
<param name="band0_hysteresis" size="4" type="float"/>
<param max="20" min="0" name="band1_delay_ms" type="float"/>
<param default="5" max="20" min="0" minInclusive="false" name="band1_rms_ms" type="float"/>
<param max="30" min="0" name="band1_gain_dB" type="float"/>
<param max="30" min="-30" name="band1_Min_Gain_dB" type="float"/>
<param default="1" max="3" min="1" name="band1_numOfKnee" type="uint32"/>
<param name="band1_threadhold_dB" size="3" type="float"/>
<param name="band1_compressRatio" size="4" type="float"/>
<param name="band1_kneeWidth" size="3" type="float"/>
<param name="band1_attackTime_ms" size="4" type="float"/>
<param name="band1_releaseTime_ms" size="4" type="float"/>
<param name="band1_hysteresis" size="4" type="float"/>
<param max="20" min="0" name="band2_delay_ms" type="float"/>
<param default="5" max="20" min="0" minInclusive="false" name="band2_rms_ms" type="float"/>
<param max="30" min="0" name="band2_gain_dB" type="float"/>
<param max="30" min="-30" name="band2_Min_Gain_dB" type="float"/>
<param default="1" max="3" min="1" name="band2_numOfKnee" type="uint32"/>
<param name="band2_threadhold_dB" size="3" type="float"/>
<param name="band2_compressRatio" size="4" type="float"/>
<param name="band2_kneeWidth" size="3" type="float"/>
<param name="band2_attackTime_ms" size="4" type="float"/>
<param name="band2_releaseTime_ms" size="4" type="float"/>
<param name="band2_hysteresis" size="4" type="float"/>
</struct>
<struct id="18">
<param max="30" min="-30" name="limiter_gain_dB" type="float"/>
<param max="0" min="-30" name="limiter_threadhold_dB" type="float"/>
<param max="100" min="0" name="limiter_attackTime_ms" type="float"/>
<param max="100" min="0" name="limiter_releaseTime_ms" type="float"/>
</struct>
<struct id="19">
<param name="frequency0" type="uint32"/>
<param name="frequency1" type="uint32"/>
</struct>
</module>
<module id="11" name="Stationary Noise Suppression">
<param default="0" id="0" max="3" name="opMode_" type="uint32"/>
<param default="48000" id="1" name="fs_" type="uint32"/>
<param default="2" id="2" name="numCh_" type="uint32"/>
<param default="3" id="3" name="chMask_" type="uint32"/>
<param default="1" id="16" name="strength level" type="uint32"/>
<param id="17" name="POWER_TIME_SMOOTH" type="float"/>
<param id="18" name="RMS_TIME_SMOOTH" type="float"/>
<param id="19" name="LOWER_BAND_THRESHOLD" size="257" type="float"/>
<param id="20" name="UPPER_BAND_THRESHOLD" size="3" type="float"/>
<param id="21" name="ATTACK_TIME" type="float"/>
<param id="22" name="RELEASE_TIME" type="float"/>
<param id="23" name="BIN_THRESHOLD" size="5" type="uint32"/>
</module>
<module id="14" name="Linear Gain">
<param default="0" id="0" max="3" name="opMode_" type="uint32"/>
<param default="48000" id="1" name="fs_" type="uint32"/>
<param default="1" id="2" name="numCh_" type="uint32"/>
<param default="1" id="3" name="chMask_" type="uint32"/>
<param id="16" name="Simple_gain" type="float"/>
<param default="0" id="17" name="ch0_assignFrom" type="int32"/>
<param default="1" id="18" name="ch1_assignFrom" type="int32"/>
<param default="2" id="19" name="ch2_assignFrom" type="int32"/>
</module>
<module id="17" name="Wind Noise Reduction">
<param default="0" id="0" max="3" name="opMode_" type="uint32"/>
<param default="48000" id="1" name="fs_" type="uint32"/>
<param default="2" id="2" name="numCh_" type="uint32"/>
<param default="3" id="3" name="chMask_" type="uint32"/>
<param default="450" id="16" name="DECISION_SMOOTHING_FACTOR" type="int32"/>
<param default="50" id="17" name="DECISION_ATTACK_SMOOTHING_FACTOR" type="int32"/>
<param default="50" id="18" name="DECISION_RELEASE_HIGH_SMOOTHING_FACTOR" type="int32"/>
<param default="50" id="19" name="DECISION_RELEASE_LOW_SMOOTHING_FACTOR" type="int32"/>
<param default="700" id="20" name="DECISION_RELEASE_THRESHOLD" type="int32"/>
<param default="0" id="21" name="DECISION_RANGE_OFFSET_FACTOR" type="int32"/>
<param default="1000" id="22" name="DECISION_RANGE_SLOPE_FACTOR" type="int32"/>
<param default="450" id="23" name="DECISION_GAIN_SMOOTHING_FACTOR" type="int32"/>
<param default="27" id="24" name="DECISION_DB_RANGE" type="int32"/>
<param default="1000" id="25" name="MASTER_REDUCTION_FACTOR" type="int32"/>
<param default="15" id="26" name="KEEP_NUM_OF_PREV_DECISIONS" type="int32"/>
<param default="1000" id="27" name="DEC_PRE_GAIN" type="int32"/>
<param default="16000" id="28" name="SUP_PRE_GAIN" type="int32"/>
<param default="2" id="29" name="COHERENCE_ENABLE" type="int32"/>
<param default="1" id="30" name="COHERENCE_START_BIN" type="int32"/>
<param default="10" id="31" name="COHERENCE_END_BIN" type="int32"/>
<param default="300" id="32" name="COHERENCE_THRESHOLD" type="int32"/>
<param default="990" id="33" name="COHERENCE_FORGETTING_FACTOR" type="int32"/>
<param default="0" id="34" name="DB_SCALING_FACTOR" type="int32"/>
<param default="9" id="35" name="SEP_LAYER" type="int32"/>
<param default="1" id="36" name="SP_GAIN_ENABLE" type="int32"/>
<param default="15" id="37" name="SP_GAIN_MAX_BIN" type="int32"/>
<param default="500" id="38" name="SP_GAIN_MIN" type="int32"/>
<param default="200" id="39" name="SP_GAIN_TH_MIN" type="int32"/>
<param default="450" id="40" name="SP_GAIN_TH_MAX" type="int32"/>
<param default="800" id="41" name="SP_GAIN_SMOOTH" type="int32"/>
<param default="3" id="42" name="SP_GAIN_FREQ_SMOOTH" type="int32"/>
<param default="300" id="43" name="MASTER_MAX_SUP_SMOOTHING_FACTOR" type="int32"/>
<param default="1" id="44" name="GAIN_FREQ_SMOOTH" type="int32"/>
<param default="2" id="45" name="GMIN_CURVE_TYPE" type="int32"/>
<param default="55" id="46" name="GMIN_LINEAR_SPLIT_MID_POINT_BINR" type="int32"/>
<param default="330" id="47" name="GMIN_LINEAR_SPLIT_MID_POINT_VAL" type="int32"/>
<param default="1000" id="48" name="SP_OVERSUB_RATIO" type="int32"/>
<param default="16" id="49" name="WIND_ENERGY_EST_COMPENSATION_GAIN" type="int32"/>
<param default="2000" id="50" name="WIND_ENERGY_CURVE_SLOPE" type="int32"/>
<param default="300" id="51" name="WIND_ENERGY_CURVE_OFFSET" type="int32"/>
<param default="16000" id="52" name="WIND_ENERGY_CURVE_MIN" type="int32"/>
<param default="16000" id="53" name="WIND_ENERGY_CURVE_MAX" type="int32"/>
<param default="900" id="54" name="WIND_ENERGY_SMOOTHING" type="int32"/>
<param default="144" id="55" name="WIND_ENERGY_NORM_DENOM" type="int32"/>
<param default="600" id="56" name="WIND_ENERGY_CURVE_SCALED_TH_MIN" type="int32"/>
<param default="900" id="57" name="WIND_ENERGY_CURVE_SCALED_TH_MAX" type="int32"/>
<param default="1" id="58" name="ENABLE_ML_COMBI_WIND_ENERGY" type="int32"/>
<param default="1" id="59" name="ENABLE_SP_COMBI_WIND_ENERGY" type="int32"/>
<param default="1" id="60" name="ENALBE_SP_COMBI_OVERSUBTRACTION" type="int32"/>
<param default="1" id="61" name="ENABLE_PRIORI_SNR" type="int32"/>
<param default="1000" id="62" name="PRIORI_SNR_ML_TUNING" type="int32"/>
<param default="15" id="63" name="DEC_PREV_NUM" type="int32"/>
<param default="1" id="64" name="SSC_ENABLE" type="int32"/>
<param default="930" id="65" name="SSC_SOFT_SMOOTHING_FACTOR" type="int32"/>
<param default="1600" id="66" name="SSC_OVERDRIVE" type="int32"/>
<param default="3" id="67" name="SSC_MIN_FREQ" type="int32"/>
<param default="130" id="68" name="SSC_MAX_FREQ" type="int32"/>
<param default="700" id="69" name="SSC_PSD_SMOOTHING_FACTOR" type="int32"/>
<param default="12" id="70" name="SSC_SOFT_DECISION_MIN_FREQ" type="int32"/>
<param default="450" id="71" name="SSC_SOFT_DECISION_MAX_FREQ" type="int32"/>
<param default="5" id="72" name="SSC_KEEP_SAVED_PROB_SMOOTH_SIZE" type="int32"/>
<param default="1000" id="73" name="GAIN_BOOSTING_COST" type="int32"/>
<param default="450" id="74" name="GAIN_SMOOTHING_FACTOR" type="int32"/>
<param default="150" id="75" name="FINAL_GAIN_SMOOTHING_OFFSET_FACTOR" type="int32"/>
<param default="1" id="76" name="MUL_CH_SPEC_DIFF_ENABLE" type="int32"/>
<param default="4" id="77" name="MUL_CH_SPEC_DIFF_CENTER_SPEC_SEL" type="int32"/>
<param default="1000" id="78" name="MUL_CH_SPEC_DIFF_WIENER_OVERDRIVE" type="int32"/>
<param default="2" id="79" name="MUL_CH_SPEC_DIFF_GAIN_COMB" type="int32"/>
<param default="900" id="80" name="MUL_CH_SPEC_DIFF_TIME_SMOOTH" type="int32"/>
</module>
<module id="18" name="Multi Channel IIR 1">
<param default="0" id="0" max="3" name="opMode_" type="uint32"/>
<param default="48000" id="1" name="fs_" type="uint32"/>
<param default="2" id="2" name="numCh_" type="uint32"/>
<param default="3" id="3" name="chMask_" type="uint32"/>
<param default="3" id="16" max="3" min="1" name="numOfChannel" type="uint32"/>
<param id="17" name="coeff" size="300" type="float"/>
<struct id="18">
<param max="18" min="-96" name="gain" size="60" type="float"/>
<param max="24000" min="0" name="frequency" size="60" type="uint32"/>
<param max="200" min="0" name="qfactor" size="60" type="float"/>
<param default="4" name="type" size="60" type="int32"/>
</struct>
</module>
<module id="32" name="Single Band DRC">
<param default="1" id="0" max="3" name="opMode_" type="uint32"/>
<param default="48000" id="1" name="fs_" type="uint32"/>
<param default="2" id="2" name="numCh_" type="uint32"/>
<param default="3" id="3" name="chMask_" type="uint32"/>
<struct id="16">
<param max="20" min="0" name="delay_ms" type="float"/>
<param default="5" max="20" min="0" minInclusive="false" name="rms_ms" type="float"/>
<param max="30" min="0" name="gain_dB" type="float"/>
<param max="30" min="-30" name="Min_Gain_dB" type="float"/>
<param default="1" max="3" min="1" name="numOfKnee" type="uint32"/>
<param name="threadhold_dB" size="3" type="float"/>
<param name="compressRatio" size="4" type="float"/>
<param name="kneeWidth" size="3" type="float"/>
<param name="attackTime_ms" size="4" type="float"/>
<param name="releaseTime_ms" size="4" type="float"/>
<param name="hysteresis" size="4" type="float"/>
<param default="0" max="1" min="0" name="rms_manual_enable" type="uint32"/>
<param default="0" max="2" min="0" name="rms_channel" type="uint32"/>
</struct>
<struct id="17">
<param max="30" min="-30" name="limiter_gain_dB" type="float"/>
<param max="0" min="-30" name="limiter_threadhold_dB" type="float"/>
<param max="100" min="0" name="limiter_attackTime_ms" type="uint32"/>
<param max="100" min="0" name="limiter_releaseTime_ms" type="uint32"/>
</struct>
</module>
<module id="10000" name="Eraser">
<param id="275" name="eraser_pre_gain" type="uint32"/>
<param id="277" name="eraser_post_gain" type="uint32"/>
<param id="279" name="non_eraser_gain" type="uint32"/>
</module>
<module id="10001" name="Cleaner">
<param id="299" name="cleaner_post_gain" type="uint32"/>
</module>
<module id="10002" name="CHRE">
<param id="297" name="chre_gain" type="uint32"/>
<param id="345" name="chre_aec_timeout" type="uint32"/>
<param id="346" name="chre_pdm_gain" type="int32"/>
<param id="347" name="chre_aec_gain" type="int32"/>
</module>
</modules>
<signalflows>
<signalflow id="1" name="Spatial Audio">
<block id="128">
<moduleRef id="18"/>
<moduleRef id="17"/>
</block>
<block id="134">
<moduleRef id="14"/>
<moduleRef id="11"/>
<moduleRef id="6"/>
<moduleRef id="7"/>
<moduleRef id="5"/>
<moduleRef id="8"/>
</block>
</signalflow>
<signalflow id="2" name="General Mic Recording">
<block id="137">
<moduleRef id="14"/>
<moduleRef id="7"/>
<moduleRef id="5"/>
<moduleRef id="8"/>
</block>
</signalflow>
<signalflow id="1000" name="Smart Feature">
<block id="0">
<moduleRef id="10000"/>
<moduleRef id="10001"/>
<moduleRef id="10002"/>
</block>
</signalflow>
</signalflows>
</template>

File diff suppressed because it is too large Load diff

File diff suppressed because it is too large Load diff

File diff suppressed because it is too large Load diff

File diff suppressed because it is too large Load diff

File diff suppressed because it is too large Load diff

View file

@ -1,58 +0,0 @@
########################################################################################################
# (Optional) The supported features list for platform vendors to query from.
# Platform vendors should call maxxaudio_qdsp_is_feature_supported with a string to query from the list.
# This config has no effect in the MaxxAudioQdspHalController. It's only meaningful for platform vendors.
# Putting any value other than 1 would be equivalent to not supported.
########################################################################################################
[HAL_SUPPORTED_FEATURES]
CUSTOM_ACTION_256=1
########################################################################################################
# This defined the options of supported sample rates.
# This can be configured by Waves or platform vendor.
########################################################################################################
[HAL_SUPPORTED_SAMPLE_RATES]
SR_COMMON = 48000
########################################################################################################
# (Optional) The subtypes that applies to different angles(0, 90, 180, 270). Can be empty if not applicable.
# This can be configured by Waves or platform vendor.
########################################################################################################
[HAL_ORIENTATION_SUBTYPES]
OST_SPEAKER = 0:12,90:13,180:12,270:0|13
########################################################################################################
# This defines available preset configurations.
# This should be configured by Waves only unless platform vendor is familiar with MPS structure.
########################################################################################################
[HAL_SUPPORTED_PRESETS]
SPEAKER_MUSIC = OM:1,SM:2,OST:OST_SPEAKER
SPEAKER_SAFE_MUSIC = OM:10,SM:2,OST:OST_SPEAKER
SPEAKER_SAFE_CALL = OM:10,SM:2,OST:OST_SPEAKER
HEADSET_MUSIC = OM:2,SM:2
########################################################################################################
# This defines available CONTROL configurations. Only define the CONTROL if you need it.
# The numbers could vary from device to device.
# This can be configured by Waves or platform vendor.
########################################################################################################
[HAL_SUPPORTED_CONTROLS]
SPEAKER_INSTANCE = INSTANCE:1,DEV:0,SR:SR_COMMON,PRESET:SPEAKER_MUSIC|SPEAKER_SAFE_MUSIC|SPEAKER_SAFE_CALL
A2DP_INSTANCE = INSTANCE:2,DEV:0,SR:SR_COMMON,PRESET:HEADSET_MUSIC
USB_HEADPHONE_INSTANCE = INSTANCE:4,DEV:0,SR:SR_COMMON,PRESET:HEADSET_MUSIC
[COEFS_CONVERTER_SETTING]
AlgFxPath=/vendor/lib/libAlgFx_HiFi3z.so
AlgFxPath64=/vendor/lib64/libAlgFx_HiFi3z.so
# do not modify the following if not necessary
#AudioFormatType=0
#AudioFormatChannels=2
#AudioFormatSampleRate=48000
#AudioFormatBitsPerSample=32
#AudioFormatSampleSize=4
#AudioFormatIncrement=8
[CUSTOM_ACTION_256]
CASE_1=PRIORITY:0,NUMBERS:2:0|1,PRESET:SPEAKER_MUSIC
CASE_2=PRIORITY:1,NUMBERS:1|2|4194304:2|3|4,PRESET:SPEAKER_SAFE_CALL
CASE_3=PRIORITY:2,NUMBERS:1|4194304:0|1,PRESET:SPEAKER_SAFE_MUSIC

View file

@ -35,10 +35,6 @@ TARGET_BOARD_KERNEL_HEADERS ?= $(RELEASE_KERNEL_HUSKY_DIR)/kernel-headers
LOCAL_PATH := device/google/shusky
ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
USE_UWBFIELDTESTQM := true
endif
include device/google/shusky/uwb/uwb_calibration.mk
ifneq ($(TARGET_BOOTS_16K),true)
@ -174,40 +170,20 @@ PRODUCT_PROPERTY_OVERRIDES += \
ro.gms.dck.eligible_wcc=3 \
ro.gms.dck.se_capability=1
# Bluetooth hci_inject test tool
PRODUCT_PACKAGES_ENG += \
hci_inject
# Bluetooth OPUS codec
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.opus.enabled=true
# Bluetooth SAR test tool
PRODUCT_PACKAGES_ENG += \
sar_test
# Bluetooth EWP test tool
PRODUCT_PACKAGES_ENG += \
ewp_tool
# Bluetooth AAC VBR
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.a2dp_aac.vbr_supported=true
# Override BQR mask to enable LE Audio Choppy report, remove BTRT logging
ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.bqr.event_mask=295262 \
persist.bluetooth.bqr.vnd_quality_mask=29 \
persist.bluetooth.bqr.vnd_trace_mask=0 \
persist.bluetooth.vendor.btsnoop=true
else
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.bqr.event_mask=295262 \
persist.bluetooth.bqr.vnd_quality_mask=16 \
persist.bluetooth.bqr.vnd_trace_mask=0 \
persist.bluetooth.vendor.btsnoop=false
endif
# Spatial Audio
PRODUCT_PACKAGES += \
@ -324,18 +300,6 @@ PRODUCT_COPY_FILES += \
device/google/shusky/location/gps.cer:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.cer
# Location
ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_COPY_FILES += \
device/google/shusky/location/lhd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
device/google/shusky/location/scd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
ifneq (,$(filter 6.1, $(TARGET_LINUX_KERNEL_VERSION)))
PRODUCT_COPY_FILES += \
device/google/shusky/location/gps.6.1.xml.hk3:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
else
PRODUCT_COPY_FILES += \
device/google/shusky/location/gps.xml.hk3:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
endif
else
PRODUCT_COPY_FILES += \
device/google/shusky/location/lhd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
device/google/shusky/location/scd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
@ -346,7 +310,6 @@ else
PRODUCT_COPY_FILES += \
device/google/shusky/location/gps_user.xml.hk3:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
endif
endif
# Set zram size
PRODUCT_VENDOR_PROPERTIES += \
@ -448,11 +411,6 @@ ifeq ($(RELEASE_IS_EMR), true)
ro.build.version.emergency_base_os=$(RELEASE_BASE_OS_HUSKY)
endif
endif
# WLC userdebug specific
ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_COPY_FILES += \
device/google/zuma/init.hardware.wlc.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.wlc.rc
endif
# Setup Wizard device-specific settings
PRODUCT_PRODUCT_PROPERTIES += \
@ -513,11 +471,6 @@ PRODUCT_PACKAGES += \
NoCutoutOverlay \
AvoidAppsInCutoutOverlay
# ETM
ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
$(call inherit-product-if-exists, device/google/common/etm/device-userdebug-modules.mk)
endif
PRODUCT_NO_BIONIC_PAGE_SIZE_MACRO := true
ifneq ($(wildcard vendor/arm/mali/valhall),)

View file

@ -163,40 +163,20 @@ PRODUCT_PROPERTY_OVERRIDES += \
ro.gms.dck.eligible_wcc=2 \
ro.gms.dck.se_capability=1
# Bluetooth hci_inject test tool
PRODUCT_PACKAGES_ENG += \
hci_inject
# Bluetooth OPUS codec
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.opus.enabled=true
# Bluetooth SAR test tool
PRODUCT_PACKAGES_ENG += \
sar_test
# Bluetooth EWP test tool
PRODUCT_PACKAGES_ENG += \
ewp_tool
# Bluetooth AAC VBR
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.a2dp_aac.vbr_supported=true
# Override BQR mask to enable LE Audio Choppy report, remove BTRT logging
ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.bqr.event_mask=295262 \
persist.bluetooth.bqr.vnd_quality_mask=29 \
persist.bluetooth.bqr.vnd_trace_mask=0 \
persist.bluetooth.vendor.btsnoop=true
else
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.bqr.event_mask=295262 \
persist.bluetooth.bqr.vnd_quality_mask=16 \
persist.bluetooth.bqr.vnd_trace_mask=0 \
persist.bluetooth.vendor.btsnoop=false
endif
# Spatial Audio
PRODUCT_PACKAGES += \
@ -307,18 +287,6 @@ PRODUCT_COPY_FILES += \
device/google/shusky/location/gps.cer:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.cer
# Location
ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_COPY_FILES += \
device/google/shusky/location/lhd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
device/google/shusky/location/scd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
ifneq (,$(filter 6.1, $(TARGET_LINUX_KERNEL_VERSION)))
PRODUCT_COPY_FILES += \
device/google/shusky/location/gps.6.1.xml.sb3:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
else
PRODUCT_COPY_FILES += \
device/google/shusky/location/gps.xml.sb3:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
endif
else
PRODUCT_COPY_FILES += \
device/google/shusky/location/lhd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
device/google/shusky/location/scd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
@ -329,7 +297,6 @@ else
PRODUCT_COPY_FILES += \
device/google/shusky/location/gps_user.xml.sb3:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
endif
endif
# Set zram size
PRODUCT_VENDOR_PROPERTIES += \
@ -429,12 +396,6 @@ endif
PRODUCT_VENDOR_PROPERTIES += \
persist.vendor.camera.rls_supported=false
# WLC userdebug specific
ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_COPY_FILES += \
device/google/zuma/init.hardware.wlc.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.wlc.rc
endif
# Setup Wizard device-specific settings
PRODUCT_PRODUCT_PROPERTIES += \
setupwizard.feature.enable_quick_start_flow=true \
@ -482,11 +443,6 @@ PRODUCT_PACKAGES += \
NoCutoutOverlay \
AvoidAppsInCutoutOverlay
# ETM
ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
$(call inherit-product-if-exists, device/google/common/etm/device-userdebug-modules.mk)
endif
PRODUCT_NO_BIONIC_PAGE_SIZE_MACRO := true
ifneq ($(wildcard vendor/arm/mali/valhall),)

View file

@ -50,10 +50,6 @@ include device/google/gs-common/check_current_prebuilt/check_current_prebuilt.mk
include device/google/shusky/sepolicy/husky-sepolicy.mk
include device/google/shusky/wifi/BoardConfig-wifi.mk
ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
-include device/google/common/etm/5_15/BoardUserdebugModules.mk
endif
DEVICE_PATH := device/google/shusky
VENDOR_PATH := vendor/google/husky
include $(DEVICE_PATH)/$(TARGET_BOOTLOADER_BOARD_NAME)/BoardConfigLineage.mk

View file

@ -1,112 +0,0 @@
<?xml version="1.0" encoding="utf-8"?>
<glgps xmlns="http://www.glpals.com/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.glpals.com/ glconfig.xsd" >
<hal
PortName="/dev/ttyBCM"
BaudRate="921600"
GpioNStdbyPath="/sys/devices/platform/111e0000.spi/spi_master/spi21/spi21.0/nstandby"
CustGpioDelayMs="250"
LogEnabled="true"
Log="JAVA"
SecondaryConfigPath="/data/vendor/gps/overlay/gps_overlay.xml"
LogDirectory="/sdcard/gps/broadcom/storage/"
CtrlPipe="/data/vendor/gps/glgpsctrl"
NmeaOutName="/data/vendor/gps/nmea_out"
acSuplServer="supl.google.com"
SuplPort="7275"
SuplLogEnable="true"
SuplLogFullName="/data/vendor/gps/suplflow.txt"
tlsEnable="true"
SuplSslMethod="SSLv23"
SuplEnable="true"
SuplUseApn="false"
SuplUseApnNI="true"
SuplUseFwCellInfo="false"
SuplDummyCellInfo ="true"
SuplTlsCertDirPath="/etc/security/cacerts"
SuplTlsCertPath="/vendor/etc/gnss/gps.cer"
SuplUT1Seconds="20"
SuplUT2Seconds="20"
SuplUT3Seconds="20"
TcpConnectionTimeout="20"
SuplLppCapable="true"
SuplEcidCapable="true"
SuplVersion="2"
SuplMinorVersion="0"
SuplOtdoaCapable="true"
SuplOtdoaCapable2="true"
SuplGlonassCapable = "true"
SuplGalileoCapable = "true"
SuplBdsCapable = "true"
SuplMgpsCapable = "true"
RtoEnable="true"
RtiEnable="true"
HttpSyncLto="true"
LtoFileName="lto2.dat"
LtoDir="/data/vendor/gps/"
LtoSyncThresholdDays="1"
GnssYearOfHardware="2020"
CpEarlyFixGuardTimeSec="1"
CpGuardTimeSec="2"
CpLppGuardTimeSec="2"
IgnoreInjectedSystemTime="true"
AttributionAppPkgName="com.google.android.carrierlocation"
AssertEnabled="true"
ExitOnComFailure="true"
CpLppeCancelDbhOnAgnssProvideLoc="true"
CpLppeUseAgnssLocForEmptyDbh="true"
CpLppHighAccuracyShapeMode="1"
ReAidingOnHotStart="false"
ReAidingIntervalSec="3600"
RuntimeSwLteFilterEnable="true"
PpsDevice="/sys/devices/platform/bbd_pps/pps_assert"
MaxThreadNum="13"
SensorsMask="0x244"
/>
<gll
PpsEnable="true"
LogPriMask="LOG_INFO"
LogFacMask="LOG_NMEA | LOG_GLLIOS | LOG_GLLAPI"
FrqPlan="FRQ_PLAN_26MHZ_2PPM_49_152MHZ_300PPB"
MultiCarrRFMode="GL_MULTI_CARR_RF_MODE_L1_L5"
MultiCarrLnaMask="L1_EXT_ON|L5_EXT_ON"
RfType="GL_RF_4776_BRCM"
ExtL5Bias="10.5"
WarmStandbyTimeout1Seconds="10"
WarmStandbyTimeout2Seconds="15"
EnableGnssPropagateInStandby="true"
RfPathLossDb_Ap="3.51"
RfPathLossDb_Cp="3.51"
RfPathLossDb_Ap_L5="4.01"
RfPathLossDb_Cp_L5="4.01"
OnChipGpsCarrierType="3,2,3,3,2,3,2,3,3,3,1,2,1,3,2,1,2,3,1,1,1,1,3,3,3,3,3,1,2,3,2,3"
EnableOnChipStopNotification="2"
PowerMode="3"
MinGpsWeekNumber="2216"
OnChipAccMask="50"
EnableB1C="false"
EnableCoex="true"
RTICacheTimeoutSec="3600"
/>
<gll_features
EnableQzsAutoSwitch="false"
EnableGloAutoSwitch="false"
EnableNicAutoSwitch="true"
EnableNavic="true"
/>
</glgps>

View file

@ -1,112 +0,0 @@
<?xml version="1.0" encoding="utf-8"?>
<glgps xmlns="http://www.glpals.com/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.glpals.com/ glconfig.xsd" >
<hal
PortName="/dev/ttyBCM"
BaudRate="921600"
GpioNStdbyPath="/sys/devices/platform/111e0000.spi/spi_master/spi21/spi21.0/nstandby"
CustGpioDelayMs="250"
LogEnabled="true"
Log="JAVA"
SecondaryConfigPath="/data/vendor/gps/overlay/gps_overlay.xml"
LogDirectory="/sdcard/gps/broadcom/storage/"
CtrlPipe="/data/vendor/gps/glgpsctrl"
NmeaOutName="/data/vendor/gps/nmea_out"
acSuplServer="supl.google.com"
SuplPort="7275"
SuplLogEnable="true"
SuplLogFullName="/data/vendor/gps/suplflow.txt"
tlsEnable="true"
SuplSslMethod="SSLv23"
SuplEnable="true"
SuplUseApn="false"
SuplUseApnNI="true"
SuplUseFwCellInfo="false"
SuplDummyCellInfo ="true"
SuplTlsCertDirPath="/etc/security/cacerts"
SuplTlsCertPath="/vendor/etc/gnss/gps.cer"
SuplUT1Seconds="20"
SuplUT2Seconds="20"
SuplUT3Seconds="20"
TcpConnectionTimeout="20"
SuplLppCapable="true"
SuplEcidCapable="true"
SuplVersion="2"
SuplMinorVersion="0"
SuplOtdoaCapable="true"
SuplOtdoaCapable2="true"
SuplGlonassCapable = "true"
SuplGalileoCapable = "true"
SuplBdsCapable = "true"
SuplMgpsCapable = "true"
RtoEnable="true"
RtiEnable="true"
HttpSyncLto="true"
LtoFileName="lto2.dat"
LtoDir="/data/vendor/gps/"
LtoSyncThresholdDays="1"
GnssYearOfHardware="2020"
CpEarlyFixGuardTimeSec="1"
CpGuardTimeSec="2"
CpLppGuardTimeSec="2"
IgnoreInjectedSystemTime="true"
AttributionAppPkgName="com.google.android.carrierlocation"
AssertEnabled="true"
ExitOnComFailure="true"
CpLppeCancelDbhOnAgnssProvideLoc="true"
CpLppeUseAgnssLocForEmptyDbh="true"
CpLppHighAccuracyShapeMode="1"
ReAidingOnHotStart="false"
ReAidingIntervalSec="3600"
RuntimeSwLteFilterEnable="true"
PpsDevice="/sys/devices/platform/bbd_pps/pps_assert"
MaxThreadNum="13"
SensorsMask="0x244"
/>
<gll
PpsEnable="true"
LogPriMask="LOG_INFO"
LogFacMask="LOG_NMEA | LOG_GLLIOS | LOG_GLLAPI"
FrqPlan="FRQ_PLAN_26MHZ_2PPM_49_152MHZ_300PPB"
MultiCarrRFMode="GL_MULTI_CARR_RF_MODE_L1_L5"
MultiCarrLnaMask="L1_EXT_ON|L5_EXT_ON"
RfType="GL_RF_4776_BRCM"
ExtL5Bias="11.3"
WarmStandbyTimeout1Seconds="10"
WarmStandbyTimeout2Seconds="15"
EnableGnssPropagateInStandby="true"
RfPathLossDb_Ap="3.4"
RfPathLossDb_Cp="3.4"
RfPathLossDb_Ap_L5="4"
RfPathLossDb_Cp_L5="4"
OnChipGpsCarrierType="3,2,3,3,2,3,2,3,3,3,1,2,1,3,2,1,2,3,1,1,1,1,3,3,3,3,3,1,2,3,2,3"
EnableOnChipStopNotification="2"
PowerMode="3"
MinGpsWeekNumber="2216"
OnChipAccMask="50"
EnableB1C="false"
EnableCoex="true"
RTICacheTimeoutSec="3600"
/>
<gll_features
EnableQzsAutoSwitch="false"
EnableGloAutoSwitch="false"
EnableNicAutoSwitch="true"
EnableNavic="true"
/>
</glgps>

View file

@ -1,113 +0,0 @@
<?xml version="1.0" encoding="utf-8"?>
<glgps xmlns="http://www.glpals.com/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.glpals.com/ glconfig.xsd" >
<hal
PortName="/dev/ttyBCM"
BaudRate="921600"
GpioNStdbyPath="/sys/devices/platform/111e0000.spi/spi_master/spi21/spi21.0/nstandby"
CustGpioDelayMs="250"
LogEnabled="true"
Log="JAVA"
SecondaryConfigPath="/data/vendor/gps/overlay/gps_overlay.xml"
LogDirectory="/sdcard/gps/broadcom/storage/"
CtrlPipe="/data/vendor/gps/glgpsctrl"
NmeaOutName="/data/vendor/gps/nmea_out"
acSuplServer="supl.google.com"
SuplPort="7275"
SuplLogEnable="true"
SuplLogFullName="/data/vendor/gps/suplflow.txt"
tlsEnable="true"
SuplSslMethod="SSLv23"
SuplEnable="true"
SuplUseApn="false"
SuplUseApnNI="true"
SuplUseFwCellInfo="false"
SuplDummyCellInfo ="true"
SuplTlsCertDirPath="/etc/security/cacerts"
SuplTlsCertPath="/vendor/etc/gnss/gps.cer"
SuplUT1Seconds="20"
SuplUT2Seconds="20"
SuplUT3Seconds="20"
TcpConnectionTimeout="20"
SuplLppCapable="true"
SuplEcidCapable="true"
SuplVersion="2"
SuplMinorVersion="0"
SuplOtdoaCapable="true"
SuplOtdoaCapable2="true"
SuplGlonassCapable = "true"
SuplGalileoCapable = "true"
SuplBdsCapable = "true"
SuplMgpsCapable = "true"
RtoEnable="true"
RtiEnable="true"
HttpSyncLto="true"
LtoFileName="lto2.dat"
LtoDir="/data/vendor/gps/"
LtoSyncThresholdDays="1"
GnssYearOfHardware="2020"
CpEarlyFixGuardTimeSec="1"
CpGuardTimeSec="2"
CpLppGuardTimeSec="2"
IgnoreInjectedSystemTime="true"
AttributionAppPkgName="com.google.android.carrierlocation"
AssertEnabled="true"
ExitOnComFailure="true"
CpLppeCancelDbhOnAgnssProvideLoc="true"
CpLppeUseAgnssLocForEmptyDbh="true"
CpLppHighAccuracyShapeMode="1"
ReAidingOnHotStart="false"
ReAidingIntervalSec="3600"
RuntimeSwLteFilterEnable="true"
PpsDevice="/sys/devices/platform/bbd_pps/pps_assert"
MaxThreadNum="13"
SensorsMask="0x244"
/>
<gll
PpsEnable="true"
LogPriMask="LOG_INFO"
LogFacMask="LOG_NMEA | LOG_GLLIOS | LOG_GLLAPI"
FrqPlan="FRQ_PLAN_26MHZ_2PPM_49_152MHZ_300PPB"
MultiCarrRFMode="GL_MULTI_CARR_RF_MODE_L1_L5"
MultiCarrLnaMask="L1_EXT_ON|L5_EXT_ON"
RfType="GL_RF_4776_BRCM"
ExtL5Bias="10.5"
WarmStandbyTimeout1Seconds="10"
WarmStandbyTimeout2Seconds="15"
EnableGnssPropagateInStandby="true"
RfPathLossDb_Ap="3.51"
RfPathLossDb_Cp="3.51"
RfPathLossDb_Ap_L5="4.01"
RfPathLossDb_Cp_L5="4.01"
OnChipGpsCarrierType="3,2,3,3,2,3,2,3,3,3,1,2,1,3,2,1,2,3,1,1,1,1,3,3,3,3,3,1,2,3,2,3"
EnableOnChipStopNotification="2"
PowerMode="3"
MinGpsWeekNumber="2216"
OnChipAccMask="50"
EnableB1C="false"
EnableCoex="true"
RTICacheTimeoutSec="3600"
/>
<gll_features
EnableQzsAutoSwitch="false"
EnableGloAutoSwitch="false"
EnableNicAutoSwitch="true"
EnableNavic="true"
ConstellationAutoSwitchOffNavOnly="true"
/>
</glgps>

View file

@ -1,113 +0,0 @@
<?xml version="1.0" encoding="utf-8"?>
<glgps xmlns="http://www.glpals.com/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.glpals.com/ glconfig.xsd" >
<hal
PortName="/dev/ttyBCM"
BaudRate="921600"
GpioNStdbyPath="/sys/devices/platform/111e0000.spi/spi_master/spi21/spi21.0/nstandby"
CustGpioDelayMs="250"
LogEnabled="true"
Log="JAVA"
SecondaryConfigPath="/data/vendor/gps/overlay/gps_overlay.xml"
LogDirectory="/sdcard/gps/broadcom/storage/"
CtrlPipe="/data/vendor/gps/glgpsctrl"
NmeaOutName="/data/vendor/gps/nmea_out"
acSuplServer="supl.google.com"
SuplPort="7275"
SuplLogEnable="true"
SuplLogFullName="/data/vendor/gps/suplflow.txt"
tlsEnable="true"
SuplSslMethod="SSLv23"
SuplEnable="true"
SuplUseApn="false"
SuplUseApnNI="true"
SuplUseFwCellInfo="false"
SuplDummyCellInfo ="true"
SuplTlsCertDirPath="/etc/security/cacerts"
SuplTlsCertPath="/vendor/etc/gnss/gps.cer"
SuplUT1Seconds="20"
SuplUT2Seconds="20"
SuplUT3Seconds="20"
TcpConnectionTimeout="20"
SuplLppCapable="true"
SuplEcidCapable="true"
SuplVersion="2"
SuplMinorVersion="0"
SuplOtdoaCapable="true"
SuplOtdoaCapable2="true"
SuplGlonassCapable = "true"
SuplGalileoCapable = "true"
SuplBdsCapable = "true"
SuplMgpsCapable = "true"
RtoEnable="true"
RtiEnable="true"
HttpSyncLto="true"
LtoFileName="lto2.dat"
LtoDir="/data/vendor/gps/"
LtoSyncThresholdDays="1"
GnssYearOfHardware="2020"
CpEarlyFixGuardTimeSec="1"
CpGuardTimeSec="2"
CpLppGuardTimeSec="2"
IgnoreInjectedSystemTime="true"
AttributionAppPkgName="com.google.android.carrierlocation"
AssertEnabled="true"
ExitOnComFailure="true"
CpLppeCancelDbhOnAgnssProvideLoc="true"
CpLppeUseAgnssLocForEmptyDbh="true"
CpLppHighAccuracyShapeMode="1"
ReAidingOnHotStart="false"
ReAidingIntervalSec="3600"
RuntimeSwLteFilterEnable="true"
PpsDevice="/sys/devices/platform/bbd_pps/pps_assert"
MaxThreadNum="13"
SensorsMask="0x244"
/>
<gll
PpsEnable="true"
LogPriMask="LOG_INFO"
LogFacMask="LOG_NMEA | LOG_GLLIOS | LOG_GLLAPI"
FrqPlan="FRQ_PLAN_26MHZ_2PPM_49_152MHZ_300PPB"
MultiCarrRFMode="GL_MULTI_CARR_RF_MODE_L1_L5"
MultiCarrLnaMask="L1_EXT_ON|L5_EXT_ON"
RfType="GL_RF_4776_BRCM"
ExtL5Bias="11.3"
WarmStandbyTimeout1Seconds="10"
WarmStandbyTimeout2Seconds="15"
EnableGnssPropagateInStandby="true"
RfPathLossDb_Ap="3.4"
RfPathLossDb_Cp="3.4"
RfPathLossDb_Ap_L5="4"
RfPathLossDb_Cp_L5="4"
OnChipGpsCarrierType="3,2,3,3,2,3,2,3,3,3,1,2,1,3,2,1,2,3,1,1,1,1,3,3,3,3,3,1,2,3,2,3"
EnableOnChipStopNotification="2"
PowerMode="3"
MinGpsWeekNumber="2216"
OnChipAccMask="50"
EnableB1C="false"
EnableCoex="true"
RTICacheTimeoutSec="3600"
/>
<gll_features
EnableQzsAutoSwitch="false"
EnableGloAutoSwitch="false"
EnableNicAutoSwitch="true"
EnableNavic="true"
ConstellationAutoSwitchOffNavOnly="true"
/>
</glgps>

View file

@ -1,34 +0,0 @@
LheName=bbd
LheRsmResetTimeoutMS=10000
GpioNStdbyPath=/sys/devices/platform/111e0000.spi/spi_master/spi21/spi21.0/nstandby
LhePatch=/vendor/firmware/SensorHub.patch
Lhe477xDebugFlags=RPC:FACILITY=65535-dKP+CUST+LHE:STDOUT_PUTS:STDOUT_LOG
LheConsole=/data/vendor/gps/LheConsole
LogEnabled=true
Log=JAVA
LogDirectory=/sdcard/gps/broadcom/storage
LheBbdPacket=/dev/ttyBCM
LheBbdControl=/dev/bbd_control
# LheBbdSensor=/dev/bbd_sensor
LheFailSafe=/data/vendor/gps/logs/esw-crash-dump.txt
LogLevel=*:I
NvStorageDir=/data/vendor/gps/
# Enable BBD debugging at these stages:
# LheDriverDebugFlags=PATCH_BBD:LHE_BBD:FSC_BBD
LheAutoBaudDelayMS=10
TrafficLogEnabled=false
SecondaryConfigPath=/data/vendor/gps/overlay/lhd_overlay.conf
SkipSensorWakeLock=true
LoggerWakeLockEnable=false
PpsEnable=true

View file

@ -1,6 +0,0 @@
LogEnabled=true
Log=JAVA
LogDirectory=/sdcard/gps/broadcom/storage
NvStorageDir=/data/vendor/gps/
TcpConnectionTimeout=20
SecondaryConfigPath=/data/vendor/gps/overlay/scd_overlay.conf

View file

@ -46,10 +46,6 @@ include device/google/gs-common/check_current_prebuilt/check_current_prebuilt.mk
include device/google/shusky/sepolicy/shiba-sepolicy.mk
include device/google/shusky/wifi/BoardConfig-wifi.mk
ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
-include device/google/common/etm/5_15/BoardUserdebugModules.mk
endif
DEVICE_PATH := device/google/shusky
VENDOR_PATH := vendor/google/shiba
include $(DEVICE_PATH)/$(TARGET_BOOTLOADER_BOARD_NAME)/BoardConfigLineage.mk