The change item are template.xml and recording.gatf which could be found in the ZIP file.
1. For template.xml: add ID73~ID80 in the new WNR library
2. For recording.gatf: update MBDRC
MIC path :
MBDRC Threadhold_dB[1] 44/44/44 (Band1/Band2/Band3)
MBDRC gain_dB 27
Limiter gain -2
Camcorder path :
MBDRC Threadhold_dB[1] 44/38/38 (Band1/Band2/Band3)
MBDRC gain_dB 24
Limiter gain 0
KneeWidth[2] 6 -> 0
Limiter_gain_dB -2 -> -0.2
Bug: 265891489
Test: HW Darren verified
Change-Id: I53ab11ab3be2180a0fef6e231890bd0c815d239f
Signed-off-by: yixuanjiang <yixuanjiang@google.com>
Copied from R4 display config file with disabling auto brightness
because ambient light sensor on ripcurrent dev board might not be
working.
Bug: 243634950
Test: check display brightness after fastboot -w
Change-Id: I45c4084d94330a3cd0fa147c6cbc10b430d44906
Signed-off-by: Shiyong Li <shiyongli@google.com>
enable load kernel modules in parallel but load some
specific modules in sequential
Test: Shiba Booted to home 1000 times without issue
Bug: 229794277
Change-Id: Idac2ae0765058a0eab718c976c1108292bd36669
Signed-off-by: Chungkai Mei <chungkai@google.com>
The change item are template.xml and recording.gatf which could be found in the ZIP file.
For template.xml: add ID73~ID80 in the new WNR library
For recording.gatf: update MBDRC MIC path : MBDRC Threadhold_dB[1] 44/44/44 (Band1/Band2/Band3) MBDRC gain_dB 27 Limiter gain -2
Camcorder path : MBDRC Threadhold_dB[1] 44/38/38 (Band1/Band2/Band3) MBDRC gain_dB 24 Limiter gain 0 KneeWidth[2] 6 -> 0 Limiter_gain_dB -2 -> -0.2
Bug: 265884472
Test: verified by HW jacky
Change-Id: I8e01794556437fa6b74e0ca6e972778272741717
Signed-off-by: yixuanjiang <yixuanjiang@google.com>
Modify the bt_vendor.conf to enable CHRE Bluetooth Feature
Bug: 265244111
Test: Enable Bluetooth, make sure it will go the AOC path.
Change-Id: I017971d2eb95fefac152bbb466c38a7830672f02
Memory reclaim can be supported now that P23 devices run on
android14-5.15 kernel.
Bug: 264994862
Test: atest MicrodroidBenchmarks
Change-Id: Ibf7d11c48dfdbf90d966b3a7402afe34b682d7f2
The change item is recording.gatf which could be found in the ZIP file.
for recording.gatf
change parameter for MBDRC in all scenarios
Mackup_gain_dB 24 -> 27.0
Min_Gain_dB -25 -> -29.0
Threadhold_dB[1] -44 -> -38
CompressRatio [1]0.8 -> 1.0
CompressRatio [2]0.2 -> 0.0
KneeWidth[2] 0 -> 6
Limiter_gain_dB -0.2 -> -2
Change IIR2 8kHz to 2dB
Test: verified by HW wjacky@
Bug: 264746360
Change-Id: Icb53d0429fe8adab43a1743bedb71ee81eafd947
Signed-off-by: yixuanjiang <yixuanjiang@google.com>
Bug: 243078049
Bug: 243079260
Test: long press gesture is registered when UDFPS is enabled.
Change-Id: Iaf5553978cdb79a92a24b674f837ae694e187d48
Signed-off-by: davidycchen <davidycchen@google.com>
No cooling device is added yet. The limits will be determined and added
once validation completes.
Bug: 244348786
Test: Confirm boot and IRQ triggered mitigation logger
Change-Id: I46c86d09d5b69620bc6c2f25bd6820507b168ca3
Signed-off-by: George Lee <geolee@google.com>
//SB3
Handset: Duncan
1: Modify NB/WB/SWB gain setting and IIR setting to meet 3GPP requirements
HAC: Owen/Duncan
1. Modify NB/WB/SWB DL FDEQ slightly to meet Y-axis magnetic FR reqs of HAC v2019
2. Copy DL settings above to Handset_HAC TMOUS / RESERVE2
Handsfree: Ricky
1. All band first tuning release for Proto stage
BT: Gene
1. Fine tune BT EL for NB WB SLR
2. BT HE table version from 1.3.1 to 1.3.3
3. Make HK BT LE EASSA to be same with SB (SB is correct originally)
Files from the latest attachment on b/264499596
Bug: 264499596
Test: verified by rickycheng@
Change-Id: I09730d343f27cec4ae4a285373f2b05daa6b2423
//HK3
Handset: Owen
1. Modify NB/WB/SWB DL FDEQ, TDDRC Gain, and SPK_Vol Gain(NB only) for 3GPP regs.
2. Modify NB/WB/SWB UL PreEQ MIC1 based on HK3 MIC Acoustic performance to match MIC0 FR
3. Modify MIC distance DIST2REF1 to 166mm based on HK3 MIC placement
4. Set NB/WB/SWB UL PGA_0/_1 gain as 20dB(from 6dB) to cover codec gain issue as a short term
5. Copy the settings above to Handset TMOUS / RESERVE2
6. Modify NB/WB/SWB Tx NS para from FM simulation to improve S-MOS(Handset Generic only)
HAC: Owen
1. Modify NB/WB/SWB DL FDEQ slightly to meet Y-axis magnetic FR reqs of HAC v2019
2. Copy DL settings above to Handset_HAC TMOUS / RESERVE2
Handsfree: Ricky
1. All band first tuning release for Proto stage
BT: Gene
1. Fine tune BT EL for NB WB SLR
2. BT HE table version from 1.3.1 to 1.3.3
3. Make HK BT LE EASSA to be same with SB (SB is correct originally)
Files from the latest attachment on b/264499619
Bug: 264499619
Test: verified by rickycheng@
Change-Id: I709998c8aa108ef21211176b6e8c50b983b2e5a0
