# Shiba specific init.rc
import /vendor/etc/init/hw/init.zuma.rc

on init && property:ro.vendor.factory=1
    import /vendor/etc/init/hw/init.factory.rc

on early-boot
    # Wait for insmod_sh to finish all common modules
    wait_for_prop vendor.common.modules.ready 1
    start insmod_sh_shiba

service insmod_sh_shiba /vendor/bin/insmod.sh /vendor/etc/init.insmod.${ro.hardware}.cfg
    class main
    user root
    group root system
    disabled
    oneshot

on property:vendor.mfgapi.touchpanel.permission=1
    chmod 0600 /sys/devices/virtual/sec/tsp/cmd
    chown system system /sys/devices/virtual/sec/tsp/cmd

# Fingerprint
on post-fs-data
    chown system system /dev/goodix_fp
    exec_background - system shell -- /vendor/bin/trusty_apploader /vendor/firmware/g7.app

# Overrides fingerprint antispoof if following persist sysprops are set
on boot && property:ro.build.type=userdebug && \
           property:persist.vendor.fingerprint.disable.fake.override=0
    setprop vendor.fingerprint.disable.fake ${persist.vendor.fingerprint.disable.fake.override}

on boot && property:ro.build.type=userdebug && \
           property:persist.vendor.fingerprint.disable.fake.override=1
    setprop vendor.fingerprint.disable.fake ${persist.vendor.fingerprint.disable.fake.override}

on boot && property:ro.build.type=userdebug && \
           property:persist.vendor.fingerprint.disable.fake.override=100
    setprop vendor.fingerprint.disable.fake ${persist.vendor.fingerprint.disable.fake.override}

# WiFi
on post-fs-data
    setprop wifi.direct.interface p2p-dev-wlan0
    setprop wifi.aware.interface aware_nmi0

    # Speaker amp permission
    chmod 644 /mnt/vendor/persist/audio/speaker.cal

    # Allow secure_element group to read / write ST33 SPI state
    chown secure_element secure_element  /sys/class/st33spi/st33spi/st33spi_state
    chmod 0660  /sys/class/st33spi/st33spi/st33spi_state

# NFC
on property:ro.boot.hardware.revision=PROTO1.0
    setprop persist.vendor.nfc.config_file_name libnfc-hal-st-proto1.conf

on property:ro.boot.hardware.revision=PROTO1.1
    setprop persist.vendor.nfc.config_file_name libnfc-hal-st-proto1.conf

# Bluetooth
on post-fs-data
    chown bluetooth system /proc/bluetooth/timesync

# Touch
on property:vendor.device.modules.ready=1
    chown system system /proc/focaltech_touch/Channel_Num
    chown system system /proc/focaltech_touch/FW_Version
    chown system system /proc/focaltech_touch/INT_PIN
    chown system system /proc/focaltech_touch/force_active
    chown system system /proc/focaltech_touch/Reset_Pin
    chown system system /proc/focaltech_touch/fw_grip
    chown system system /proc/focaltech_touch/fw_palm
    chown system system /proc/focaltech_touch/heatmap_onoff
    chown system system /proc/focaltech_touch/mf_mode
    chown system system /proc/focaltech_touch/selftest/Baseline
    chown system system /proc/focaltech_touch/selftest/Noise
    chown system system /proc/focaltech_touch/selftest/Panel_Differ
    chown system system /proc/focaltech_touch/selftest/Rawdata
    chown system system /proc/focaltech_touch/selftest/Rawdata_Uniformity
    chown system system /proc/focaltech_touch/selftest/Scap_CB
    chown system system /proc/focaltech_touch/selftest/Scap_Rawdata
    chown system system /proc/focaltech_touch/selftest/Short
    chown system system /proc/focaltech_touch/selftest/Strength