Evolution-X-Tensor/device_google_shusky
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
device_google_shusky/device-husky.mk
Pawan Wagh b91082483f Use husky specific flag for dev options 
Husky and shiba might use different kernels moving forward and
dev options should be controlled by separate flags on husky and
shiba.

Test: Build husky-trunk_staging-userdebug
Bug: 342011434
Change-Id: I8c855c95d99e4e4b3f2233179f368bcbb63a9720
2024-05-23 20:25:17 +00:00

474 lines
18 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2021 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# Restrict the visibility of Android.bp files to improve build analysis time
$(call inherit-product-if-exists, vendor/google/products/sources_pixel.mk)
TARGET_LINUX_KERNEL_VERSION := $(RELEASE_KERNEL_HUSKY_VERSION)
# Keeps flexibility for kasan and ufs builds
TARGET_KERNEL_DIR ?= $(RELEASE_KERNEL_HUSKY_DIR)
TARGET_BOARD_KERNEL_HEADERS ?= $(RELEASE_KERNEL_HUSKY_DIR)/kernel-headers
LOCAL_PATH := device/google/shusky
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
USE_UWBFIELDTESTQM := true
endif
ifeq ($(filter factory_husky, $(TARGET_PRODUCT)),)
include device/google/shusky/uwb/uwb_calibration.mk
endif
DEVICE_PAGE_AGNOSTIC ?= $(if $(filter %_pgagnostic,$(TARGET_PRODUCT)),true,false)
ifeq ($(DEVICE_PAGE_AGNOSTIC),true)
TARGET_USERDATAIMAGE_FILE_SYSTEM_TYPE := ext4
TARGET_KERNEL_DIR := $(RELEASE_KERNEL_HUSKY_DIR)/16kb
TARGET_RW_FILE_SYSTEM_TYPE := ext4
else
PRODUCT_16K_DEVELOPER_OPTION := $(RELEASE_GOOGLE_HUSKY_16K_DEVELOPER_OPTION)
endif
$(call inherit-product-if-exists, vendor/google_devices/shusky/prebuilts/device-vendor-husky.mk)
$(call inherit-product-if-exists, vendor/google_devices/zuma/prebuilts/device-vendor.mk)
$(call inherit-product-if-exists, vendor/google_devices/zuma/proprietary/device-vendor.mk)
$(call inherit-product-if-exists, vendor/google_devices/shusky/proprietary/husky/device-vendor-husky.mk)
$(call inherit-product-if-exists, vendor/google_devices/husky/proprietary/device-vendor.mk)
$(call inherit-product-if-exists, vendor/qorvo/uwb/qm35-hal/Device.mk)
$(call inherit-product-if-exists, vendor/google_devices/shusky/proprietary/WallpapersHusky.mk)
# display
DEVICE_PACKAGE_OVERLAYS += device/google/shusky/husky/overlay
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.ignore_hdr_camera_layers=true
PRODUCT_COPY_FILES += \
device/google/shusky/husky/display_colordata_dev_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_dev_cal0.pb \
device/google/shusky/husky/display_golden_google-hk3_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_google-hk3_cal0.pb \
device/google/shusky/display_golden_external_display_cal2.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_external_display_cal2.pb
CAMERA_PRODUCT ?= husky
ifeq ($(RELEASE_PIXEL_AIDL_AUDIO_HAL_ZUMA),true)
USE_AUDIO_HAL_AIDL := true
endif
include device/google/shusky/camera/camera.mk
include device/google/shusky/audio/husky/audio-tables.mk
include device/google/zuma/device-shipping-common.mk
include hardware/google/pixel/vibrator/cs40l26/device.mk
include device/google/gs-common/bcmbt/bluetooth.mk
include device/google/gs-common/touch/stm/stm20.mk
include device/google/gs-common/touch/gti/gti.mk
include device/google/gs-common/touch/touchinspector/touchinspector.mk
# Init files
PRODUCT_COPY_FILES += \
device/google/shusky/conf/init.husky.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.husky.rc
# Recovery files
PRODUCT_COPY_FILES += \
device/google/shusky/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.husky.rc
# MIPI Coex Configs
PRODUCT_COPY_FILES += \
device/google/shusky/husky/radio/husky_camera_front_dbr_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_front_dbr_coex_table.csv \
device/google/shusky/husky/radio/husky_camera_front_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_front_mipi_coex_table.csv \
device/google/shusky/husky/radio/husky_camera_rear_tele_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_rear_tele_mipi_coex_table.csv \
device/google/shusky/husky/radio/husky_display_primary_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/display_primary_mipi_coex_table.csv
# NFC
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
device/google/shusky/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
device/google/shusky/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf
PRODUCT_PACKAGES += \
$(RELEASE_PACKAGE_NFC_STACK) \
Tag \
android.hardware.nfc-service.st
# SecureElement
PRODUCT_PACKAGES += \
android.hardware.secure_element-service.thales
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \
device/google/shusky/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf
# Bluetooth HAL
PRODUCT_COPY_FILES += \
device/google/shusky/bluetooth/bt_vendor_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth/bt_vendor_overlay.conf
PRODUCT_PROPERTY_OVERRIDES += \
ro.bluetooth.a2dp_offload.supported=true \
persist.bluetooth.a2dp_offload.disabled=false \
persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac-opus
# Enable Bluetooth AutoOn feature
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.server.automatic_turn_on=true
# Bluetooth Tx power caps
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits.csv \
$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky_CA.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_CA.csv \
$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_EU.csv \
$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky_JP.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_JP.csv \
$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_US.csv \
$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky_GC3VE_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GC3VE_EU.csv
# POF
PRODUCT_PRODUCT_PROPERTIES += \
ro.bluetooth.finder.supported=true
# Spatial Audio
PRODUCT_PACKAGES += \
libspatialaudio
# declare use of spatial audio
PRODUCT_PROPERTY_OVERRIDES += \
ro.audio.spatializer_enabled=true
# Sound Dose
PRODUCT_PACKAGES += \
android.hardware.audio.sounddose-vendor-impl \
audio_sounddose_aoc
# Audio CCA property
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.audio.cca.enabled=false
# DCK properties based on target
PRODUCT_PROPERTY_OVERRIDES += \
ro.gms.dck.eligible_wcc=3 \
ro.gms.dck.se_capability=1
# Bluetooth hci_inject test tool
PRODUCT_PACKAGES_DEBUG += \
hci_inject
# Bluetooth OPUS codec
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.opus.enabled=true
# Bluetooth SAR test tool
PRODUCT_PACKAGES_DEBUG += \
sar_test
# Bluetooth EWP test tool
PRODUCT_PACKAGES_DEBUG += \
ewp_tool
# Bluetooth AAC VBR
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.a2dp_aac.vbr_supported=true
# Override BQR mask to enable LE Audio Choppy report, remove BTRT logging
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.bqr.event_mask=295006 \
persist.bluetooth.bqr.vnd_quality_mask=29 \
persist.bluetooth.bqr.vnd_trace_mask=0 \
persist.bluetooth.vendor.btsnoop=true
else
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.bqr.event_mask=295006 \
persist.bluetooth.bqr.vnd_quality_mask=16 \
persist.bluetooth.bqr.vnd_trace_mask=0 \
persist.bluetooth.vendor.btsnoop=false
endif
# Spatial Audio
PRODUCT_PACKAGES += \
libspatialaudio \
librondo
# Bluetooth Super Wide Band
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.hfp.swb.supported=true
# Bluetooth LE Audio
PRODUCT_PRODUCT_PROPERTIES += \
ro.bluetooth.leaudio_switcher.supported?=true \
bluetooth.profile.bap.unicast.client.enabled?=true \
bluetooth.profile.csip.set_coordinator.enabled?=true \
bluetooth.profile.hap.client.enabled?=true \
bluetooth.profile.mcp.server.enabled?=true \
bluetooth.profile.ccp.server.enabled?=true \
bluetooth.profile.vcp.controller.enabled?=true
ifeq ($(RELEASE_PIXEL_BROADCAST_ENABLED), true)
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.profile.bap.broadcast.assist.enabled=true \
bluetooth.profile.bap.broadcast.source.enabled=true
endif
# Bluetooth LE Audio enable hardware offloading
PRODUCT_PRODUCT_PROPERTIES += \
ro.bluetooth.leaudio_offload.supported=true \
persist.bluetooth.leaudio_offload.disabled=false
# Bluetooth LE Auido offload capabilities setting
PRODUCT_COPY_FILES += \
device/google/shusky/bluetooth/le_audio_codec_capabilities.xml:$(TARGET_COPY_OUT_VENDOR)/etc/le_audio_codec_capabilities.xml
# LE Audio Unicast Allowlist
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.leaudio.allow_list=SM-R510,WF-1000XM5
# Bluetooth LE Audio CIS handover to SCO
# Set the property only for the controller couldn't support CIS/SCO simultaneously. More detailed in b/242908683.
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.leaudio.notify.idle.during.call=true
# Support LE Audio dual mic SWB call
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.leaudio.dual_bidirection_swb.supported=true
# Support LE & Classic concurrent encryption (b/330704060)
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.ble.allow_enc_with_bredr=true
# Support One-Handed mode
PRODUCT_PRODUCT_PROPERTIES += \
ro.support_one_handed_mode=true
# Keymaster HAL
#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service
# Gatekeeper HAL
#LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= android.hardware.gatekeeper@1.0-service.software
# Gatekeeper
# PRODUCT_PACKAGES += \
# android.hardware.gatekeeper@1.0-service.software
# Keymint replaces Keymaster
# PRODUCT_PACKAGES += \
# android.hardware.security.keymint-service
# Keymaster
#PRODUCT_PACKAGES += \
# android.hardware.keymaster@4.0-impl \
# android.hardware.keymaster@4.0-service
#PRODUCT_PACKAGES += android.hardware.keymaster@4.0-service.remote
#PRODUCT_PACKAGES += android.hardware.keymaster@4.1-service.remote
#LOCAL_KEYMASTER_PRODUCT_PACKAGE := android.hardware.keymaster@4.1-service
#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service
# PRODUCT_PROPERTY_OVERRIDES += \
# ro.hardware.keystore_desede=true \
# ro.hardware.keystore=software \
# ro.hardware.gatekeeper=software
# PowerStats HAL
PRODUCT_SOONG_NAMESPACES += \
device/google/shusky/powerstats/husky \
device/google/shusky
# WiFi Overlay
PRODUCT_PACKAGES += \
UwbOverlayHK3 \
WifiOverlay2023 \
PixelWifiOverlay2023
# Trusty liboemcrypto.so
PRODUCT_SOONG_NAMESPACES += vendor/google_devices/shusky/prebuilts
# UWB
PRODUCT_SOONG_NAMESPACES += \
device/google/shusky/uwb
# Location
# SDK build system
include device/google/gs-common/gps/brcm/device.mk
PRODUCT_COPY_FILES += \
device/google/shusky/location/gps.cer:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.cer
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_COPY_FILES += \
device/google/shusky/location/lhd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
device/google/shusky/location/scd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf \
device/google/shusky/location/gps.xml.hk3:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
else
PRODUCT_COPY_FILES += \
device/google/shusky/location/lhd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
device/google/shusky/location/scd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf \
device/google/shusky/location/gps_user.xml.hk3:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
endif
# Set zram size
PRODUCT_VENDOR_PROPERTIES += \
vendor.zram.size=50p \
persist.device_config.configuration.disable_rescue_party=true
# Fingerprint HAL
GOODIX_CONFIG_BUILD_VERSION := g7_trusty
APEX_FPS_TA_DIR := //vendor/google_devices/shusky/prebuilts
$(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_common.mk)
ifeq ($(filter factory%, $(TARGET_PRODUCT)),)
$(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_shipping.mk)
else
$(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_factory.mk)
endif
PRODUCT_VENDOR_PROPERTIES += \
persist.vendor.udfps.als_feed_forward_supported=true \
persist.vendor.udfps.lhbm_controlled_in_hal_supported=true
# Fingerprint exposure compensation
PRODUCT_VENDOR_PROPERTIES += \
persist.vendor.udfps.auto_exposure_compensation_supported=true
# Camera Vendor property
PRODUCT_VENDOR_PROPERTIES += \
persist.vendor.camera.front_720P_always_binning=true
# Media Performance Class 14
PRODUCT_PRODUCT_PROPERTIES += ro.odm.build.media_performance_class=34
# config of display brightness dimming
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.0.brightness.dimming.usage?=1
PRODUCT_VENDOR_PROPERTIES += \
vendor.primarydisplay.op.hs_hz=120 \
vendor.primarydisplay.op.ns_hz=60 \
vendor.primarydisplay.op.ns_min_dbv=1172
# kernel idle timer for display driver
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.support_kernel_idle_timer=true
# lhbm peak brightness delay: decided by kernel
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.primarydisplay.lhbm.frames_to_reach_peak_brightness=0
# Display LBE
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.lbe.supported=1
# blocking zone for min idle refresh rate
PRODUCT_VENDOR_PROPERTIES += \
ro.vendor.primarydisplay.blocking_zone.min_refresh_rate_by_nits=15:10,:1
# Display ACL
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.0.brightness.acl.default=0
# display color data
PRODUCT_COPY_FILES += \
device/google/shusky/husky/panel_config_google-hk3_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/panel_config_google-hk3_cal0.pb
# Vibrator HAL
$(call soong_config_set,haptics,kernel_ver,v$(subst .,_,$(TARGET_LINUX_KERNEL_VERSION)))
ACTUATOR_MODEL := luxshare_ict_081545
ADAPTIVE_HAPTICS_FEATURE := adaptive_haptics_v1
PRODUCT_VENDOR_PROPERTIES += \
persist.vendor.vibrator.hal.chirp.enabled=0 \
ro.vendor.vibrator.hal.device.mass=0.222 \
ro.vendor.vibrator.hal.loc.coeff=2.8 \
persist.vendor.vibrator.hal.context.enable=false \
persist.vendor.vibrator.hal.context.scale=60 \
persist.vendor.vibrator.hal.context.fade=true \
persist.vendor.vibrator.hal.context.cooldowntime=1600 \
persist.vendor.vibrator.hal.context.settlingtime=5000 \
ro.vendor.vibrator.hal.dbc.enable=true \
ro.vendor.vibrator.hal.dbc.envrelcoef=8353728 \
ro.vendor.vibrator.hal.dbc.riseheadroom=1909602 \
ro.vendor.vibrator.hal.dbc.fallheadroom=1909602 \
ro.vendor.vibrator.hal.dbc.txlvlthreshfs=2516583 \
ro.vendor.vibrator.hal.dbc.txlvlholdoffms=0 \
ro.vendor.vibrator.hal.pm.activetimeout=5
# Increment the SVN for any official public releases
PRODUCT_VENDOR_PROPERTIES += \
ro.vendor.build.svn=27
# WLC userdebug specific
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_COPY_FILES += \
device/google/zuma/init.hardware.wlc.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.wlc.rc
endif
# Setup Wizard device-specific settings
PRODUCT_PRODUCT_PROPERTIES += \
setupwizard.feature.enable_quick_start_flow=true \
# Quick Start device-specific settings
PRODUCT_PRODUCT_PROPERTIES += \
ro.quick_start.oem_id=00e0 \
ro.quick_start.device_id=husky
# PKVM Memory Reclaim
PRODUCT_VENDOR_PROPERTIES += \
hypervisor.memory_reclaim.supported=1
# P23 Devices no longer need rlsservice
PRODUCT_VENDOR_PROPERTIES += \
persist.vendor.camera.rls_supported=false
# Settings Overlay
PRODUCT_PACKAGES += \
SettingsHuskyOverlay
# Display RRS default Config
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += persist.vendor.display.primary.boot_config=1008x2244@120
# TODO: b/250788756 - the property will be phased out after HWC loads user-preferred mode
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.preferred_mode=1008x2244@120
# Window Extensions
$(call inherit-product, $(SRC_TARGET_DIR)/product/window_extensions.mk)
# Disable Settings large-screen optimization enabled by Window Extensions
PRODUCT_SYSTEM_PROPERTIES += \
persist.settings.large_screen_opt.enabled=false
# Keyboard height ratio and bottom padding in dp for portrait mode
PRODUCT_PRODUCT_PROPERTIES += \
ro.com.google.ime.kb_pad_port_b=10.4
PRODUCT_PRODUCT_PROPERTIES ?= \
ro.com.google.ime.height_ratio=1.0
# Enable camera exif model/make reporting
PRODUCT_VENDOR_PROPERTIES += \
persist.vendor.camera.exif_reveal_make_model=true
# AVF assignable devices xml
PRODUCT_PACKAGES += shusky_assignable_devices.xml
# Enable DeviceAsWebcam support
PRODUCT_VENDOR_PROPERTIES += \
ro.usb.uvc.enabled=true
PRODUCT_PACKAGES += \
NfcOverlayHusky \
# Set support hide display cutout feature
PRODUCT_PRODUCT_PROPERTIES += \
ro.support_hide_display_cutout=true
PRODUCT_PACKAGES += \
NoCutoutOverlay \
AvoidAppsInCutoutOverlay
# ETM
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
$(call inherit-product-if-exists, device/google/common/etm/device-userdebug-modules.mk)
endif
PRODUCT_NO_BIONIC_PAGE_SIZE_MACRO := true
Reference in a new issue View git blame Copy permalink