Evolution-X-Tensor/device_google_shusky
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
device_google_shusky/device-ripcurrent.mk
Patty Huang f5c46e3aa7 [P23] Enable LE Audio broadcast offload 
1. Set the LE Audio broadcast switcher property
2. Enable LE Audio broadcast profile
3. Add support for BLE Broadcast output in audio policy file
4. Add broadcast offload capability

Test: Manual
Tag: #feature
Bug: 268170293
Change-Id: I423d08442a99cf73535f5664f81c722c62b60996
2023-02-24 06:32:43 +00:00

243 lines
9 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2021 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
TARGET_KERNEL_DIR ?= device/google/shusky-kernel
TARGET_BOARD_KERNEL_HEADERS := device/google/shusky-kernel/kernel-headers
$(call inherit-product-if-exists, vendor/google_devices/shusky/prebuilts/device-vendor-ripcurrent.mk)
$(call inherit-product-if-exists, vendor/google_devices/zuma/prebuilts/device-vendor.mk)
$(call inherit-product-if-exists, vendor/google_devices/zuma/proprietary/device-vendor.mk)
$(call inherit-product-if-exists, vendor/google_devices/shusky/proprietary/ripcurrent/device-vendor-ripcurrent.mk)
$(call inherit-product-if-exists, vendor/qorvo/uwb/qm35-hal/Device.mk)
include device/google/shusky/audio/ripcurrent/audio-tables.mk
include device/google/zuma/device-shipping-common.mk
include hardware/google/pixel/vibrator/cs40l26/device-stereo.mk
include device/google/gs-common/bcmbt/bluetooth.mk
include device/google/gs-common/touch/stm/stm20.mk
# go/lyric-soong-variables
$(call soong_config_set,lyric,camera_hardware,ripcurrent)
$(call soong_config_set,lyric,tuning_product,ripcurrent)
$(call soong_config_set,google3a_config,target_device,ripcurrent)
# display
DEVICE_PACKAGE_OVERLAYS += device/google/shusky/ripcurrent/overlay
# Init files
PRODUCT_COPY_FILES += \
device/google/shusky/conf/init.ripcurrent.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.ripcurrent.rc
# Recovery files
PRODUCT_COPY_FILES += \
device/google/shusky/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.ripcurrent.rc
# insmod files
PRODUCT_COPY_FILES += \
device/google/shusky/init.insmod.ripcurrent.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.ripcurrent.cfg
# Camera
PRODUCT_COPY_FILES += \
device/google/shusky/media_profiles_ripcurrent.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml
# NFC
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
device/google/shusky/nfc/libnfc-hal-st-disable.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
device/google/shusky/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st-enable.conf \
device/google/shusky/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf
PRODUCT_PACKAGES += \
NfcNci \
Tag \
android.hardware.nfc-service.st
# SecureElement
PRODUCT_PACKAGES += \
android.hardware.secure_element@1.2-service-gto
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \
device/google/shusky/nfc/libse-gto-hal-disable.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf
DEVICE_MANIFEST_FILE += \
device/google/shusky/nfc/manifest_se.xml
# Thermal Config
PRODUCT_COPY_FILES += \
device/google/shusky/thermal_info_config_ripcurrent.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json
# Power HAL config
PRODUCT_COPY_FILES += \
device/google/shusky/powerhint-ripcurrent.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json
# Bluetooth HAL
PRODUCT_COPY_FILES += \
device/google/shusky/bluetooth/bt_vendor_overlay_ripcurrent.conf:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth/bt_vendor_overlay.conf
PRODUCT_PROPERTY_OVERRIDES += \
ro.bluetooth.a2dp_offload.supported=true \
persist.bluetooth.a2dp_offload.disabled=false \
persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac-opus
# Spatial Audio
PRODUCT_PACKAGES += \
libspatialaudio
# declare use of spatial audio
PRODUCT_PROPERTY_OVERRIDES += \
ro.audio.spatializer_enabled=true
# Bluetooth hci_inject test tool
PRODUCT_PACKAGES_DEBUG += \
hci_inject
# Bluetooth OPUS codec
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.opus.enabled=true
# Bluetooth SAR test tool
PRODUCT_PACKAGES_DEBUG += \
sar_test
# Bluetooth EWP test tool
PRODUCT_PACKAGES_DEBUG += \
ewp_tool
# Bluetooth AAC VBR
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.a2dp_aac.vbr_supported=true
# Override BQR mask to enable LE Audio Choppy report, remove BTRT logging
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.bqr.event_mask=262238
else
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.bqr.event_mask=94
endif
# default BDADDR for EVB only
PRODUCT_PROPERTY_OVERRIDES += \
ro.vendor.bluetooth.evb_bdaddr="22:22:22:33:44:55"
# Spatial Audio
PRODUCT_PACKAGES += \
libspatialaudio \
librondo
# Bluetooth LE Audio
PRODUCT_PRODUCT_PROPERTIES += \
ro.bluetooth.leaudio_switcher.supported=true \
bluetooth.profile.bap.unicast.client.enabled=true \
bluetooth.profile.csip.set_coordinator.enabled=true \
bluetooth.profile.hap.client.enabled=true \
bluetooth.profile.mcp.server.enabled=true \
bluetooth.profile.ccp.server.enabled=true \
bluetooth.profile.vcp.controller.enabled=true \
bluetooth.profile.bap.broadcast.assist.enabled=true \
bluetooth.profile.bap.broadcast.source.enabled=true
# Bluetooth LE Audio enable hardware offloading
PRODUCT_PRODUCT_PROPERTIES += \
ro.bluetooth.leaudio_offload.supported=true \
persist.bluetooth.leaudio_offload.disabled=false \
ro.bluetooth.leaudio_broadcast_switcher.supported=true
# Bluetooth LE Auido offload capabilities setting
PRODUCT_COPY_FILES += \
device/google/shusky/bluetooth/le_audio_codec_capabilities.xml:$(TARGET_COPY_OUT_VENDOR)/etc/le_audio_codec_capabilities.xml
# Keymaster HAL
#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service
# Gatekeeper HAL
#LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= android.hardware.gatekeeper@1.0-service.software
# Gatekeeper
# PRODUCT_PACKAGES += \
# android.hardware.gatekeeper@1.0-service.software
# Keymint replaces Keymaster
# PRODUCT_PACKAGES += \
# android.hardware.security.keymint-service
# Keymaster
#PRODUCT_PACKAGES += \
# android.hardware.keymaster@4.0-impl \
# android.hardware.keymaster@4.0-service
#PRODUCT_PACKAGES += android.hardware.keymaster@4.0-service.remote
#PRODUCT_PACKAGES += android.hardware.keymaster@4.1-service.remote
#LOCAL_KEYMASTER_PRODUCT_PACKAGE := android.hardware.keymaster@4.1-service
#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service
# PRODUCT_PROPERTY_OVERRIDES += \
# ro.hardware.keystore_desede=true \
# ro.hardware.keystore=software \
# ro.hardware.gatekeeper=software
# PowerStats HAL
PRODUCT_SOONG_NAMESPACES += \
device/google/shusky/powerstats/ripcurrent
# WiFi Overlay
PRODUCT_PACKAGES += \
WifiOverlay2023
# Trusty liboemcrypto.so
PRODUCT_SOONG_NAMESPACES += vendor/google_devices/shusky/prebuilts
# Location
PRODUCT_COPY_FILES += \
device/google/shusky/location/gps.cer:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.cer
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_COPY_FILES += \
device/google/shusky/location/lhd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
device/google/shusky/location/scd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf \
device/google/shusky/location/gps.xml:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
else
PRODUCT_COPY_FILES += \
device/google/shusky/location/lhd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
device/google/shusky/location/scd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf \
device/google/shusky/location/gps_user.xml:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
endif
# Set zram size
PRODUCT_VENDOR_PROPERTIES += \
vendor.zram.size=3g \
persist.device_config.configuration.disable_rescue_party=true
PRODUCT_VENDOR_PROPERTIES += \
persist.vendor.udfps.als_feed_forward_supported=true \
persist.vendor.udfps.lhbm_controlled_in_hal_supported=true
# Vibrator HAL
ACTUATOR_MODEL := luxshare_ict_081545
PRODUCT_VENDOR_PROPERTIES += \
ro.vendor.vibrator.hal.chirp.enabled=1 \
ro.vendor.vibrator.hal.device.mass=0.222 \
ro.vendor.vibrator.hal.loc.coeff=2.8
# PKVM Memory Reclaim
PRODUCT_VENDOR_PROPERTIES += \
hypervisor.memory_reclaim.supported=1
Reference in a new issue View git blame Copy permalink