device_google_shusky/device-ripcurrent.mk
shihchienc fb1be101b0 Enable superwide band system property
As the change of init feature flag on swb is ready, we will open
swb on those devices that supports this feature with more flexibility
since wiping sys property could be done at android regular releases
as enabling feature flag on server make it more flexible on schedule.

Test: manual
Bug: 283722412
Change-Id: If015fd92b5c75a07bb0820f54dc413a32031f6ea
2023-05-22 06:27:52 +00:00

246 lines
9 KiB
Makefile

#
# Copyright (C) 2021 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
TARGET_KERNEL_DIR ?= device/google/shusky-kernel
TARGET_BOARD_KERNEL_HEADERS := device/google/shusky-kernel/kernel-headers
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
USE_UWBFIELDTESTQM := true
endif
$(call inherit-product-if-exists, vendor/google_devices/shusky/prebuilts/device-vendor-ripcurrent.mk)
$(call inherit-product-if-exists, vendor/google_devices/zuma/prebuilts/device-vendor.mk)
$(call inherit-product-if-exists, vendor/google_devices/zuma/proprietary/device-vendor.mk)
$(call inherit-product-if-exists, vendor/google_devices/shusky/proprietary/ripcurrent/device-vendor-ripcurrent.mk)
$(call inherit-product-if-exists, vendor/qorvo/uwb/qm35-hal/Device.mk)
include device/google/shusky/audio/ripcurrent/audio-tables.mk
include device/google/zuma/device-shipping-common.mk
include hardware/google/pixel/vibrator/cs40l26/device-stereo.mk
include device/google/gs-common/bcmbt/bluetooth.mk
include device/google/gs-common/gps/brcm/cbd_gps.mk
include device/google/gs-common/touch/stm/stm20.mk
# go/lyric-soong-variables
$(call soong_config_set,lyric,camera_hardware,ripcurrent)
$(call soong_config_set,lyric,tuning_product,ripcurrent)
$(call soong_config_set,google3a_config,target_device,ripcurrent)
# display
DEVICE_PACKAGE_OVERLAYS += device/google/shusky/ripcurrent/overlay
# Init files
PRODUCT_COPY_FILES += \
device/google/shusky/conf/init.ripcurrent.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.ripcurrent.rc
# Recovery files
PRODUCT_COPY_FILES += \
device/google/shusky/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.ripcurrent.rc
# Camera
PRODUCT_COPY_FILES += \
device/google/shusky/media_profiles_ripcurrent.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml
# NFC
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
device/google/shusky/nfc/libnfc-hal-st-disable.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
device/google/shusky/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st-enable.conf \
device/google/shusky/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf
PRODUCT_PACKAGES += \
NfcNci \
Tag \
android.hardware.nfc-service.st
# SecureElement
PRODUCT_PACKAGES += \
android.hardware.secure_element-service.thales
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \
device/google/shusky/nfc/libse-gto-hal-disable.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf
# Bluetooth HAL
PRODUCT_COPY_FILES += \
device/google/shusky/bluetooth/bt_vendor_overlay_ripcurrent.conf:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth/bt_vendor_overlay.conf
PRODUCT_PROPERTY_OVERRIDES += \
ro.bluetooth.a2dp_offload.supported=true \
persist.bluetooth.a2dp_offload.disabled=false \
persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac-opus
# Spatial Audio
PRODUCT_PACKAGES += \
libspatialaudio
# declare use of spatial audio
PRODUCT_PROPERTY_OVERRIDES += \
ro.audio.spatializer_enabled=true
# Bluetooth hci_inject test tool
PRODUCT_PACKAGES_DEBUG += \
hci_inject
# Bluetooth OPUS codec
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.opus.enabled=true
# Bluetooth SAR test tool
PRODUCT_PACKAGES_DEBUG += \
sar_test
# Bluetooth EWP test tool
PRODUCT_PACKAGES_DEBUG += \
ewp_tool
# Bluetooth AAC VBR
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.a2dp_aac.vbr_supported=true
# Override BQR mask to enable LE Audio Choppy report, remove BTRT logging
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.bqr.event_mask=295006 \
persist.bluetooth.bqr.vnd_quality_mask=29 \
persist.bluetooth.bqr.vnd_trace_mask=0
else
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.bqr.event_mask=295006 \
persist.bluetooth.bqr.vnd_quality_mask=16 \
persist.bluetooth.bqr.vnd_trace_mask=0
endif
# default BDADDR for EVB only
PRODUCT_PROPERTY_OVERRIDES += \
ro.vendor.bluetooth.evb_bdaddr="22:22:22:33:44:55"
# Spatial Audio
PRODUCT_PACKAGES += \
libspatialaudio \
librondo
# Bluetooth Super Wide Band
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.hfp.swb.supported=true
# Bluetooth LE Audio
PRODUCT_PRODUCT_PROPERTIES += \
ro.bluetooth.leaudio_switcher.supported=true \
bluetooth.profile.bap.unicast.client.enabled=true \
bluetooth.profile.csip.set_coordinator.enabled=true \
bluetooth.profile.hap.client.enabled=true \
bluetooth.profile.mcp.server.enabled=true \
bluetooth.profile.ccp.server.enabled=true \
bluetooth.profile.vcp.controller.enabled=true \
bluetooth.profile.bap.broadcast.assist.enabled=true \
bluetooth.profile.bap.broadcast.source.enabled=true
# Bluetooth LE Audio enable hardware offloading
PRODUCT_PRODUCT_PROPERTIES += \
ro.bluetooth.leaudio_offload.supported=true \
persist.bluetooth.leaudio_offload.disabled=false \
ro.bluetooth.leaudio_broadcast_switcher.supported=true
# Bluetooth LE Auido offload capabilities setting
PRODUCT_COPY_FILES += \
device/google/shusky/bluetooth/le_audio_codec_capabilities.xml:$(TARGET_COPY_OUT_VENDOR)/etc/le_audio_codec_capabilities.xml
# Keymaster HAL
#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service
# Gatekeeper HAL
#LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= android.hardware.gatekeeper@1.0-service.software
# Gatekeeper
# PRODUCT_PACKAGES += \
# android.hardware.gatekeeper@1.0-service.software
# Keymint replaces Keymaster
# PRODUCT_PACKAGES += \
# android.hardware.security.keymint-service
# Keymaster
#PRODUCT_PACKAGES += \
# android.hardware.keymaster@4.0-impl \
# android.hardware.keymaster@4.0-service
#PRODUCT_PACKAGES += android.hardware.keymaster@4.0-service.remote
#PRODUCT_PACKAGES += android.hardware.keymaster@4.1-service.remote
#LOCAL_KEYMASTER_PRODUCT_PACKAGE := android.hardware.keymaster@4.1-service
#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service
# PRODUCT_PROPERTY_OVERRIDES += \
# ro.hardware.keystore_desede=true \
# ro.hardware.keystore=software \
# ro.hardware.gatekeeper=software
# PowerStats HAL
PRODUCT_SOONG_NAMESPACES += \
device/google/shusky/powerstats/ripcurrent
# WiFi Overlay
PRODUCT_PACKAGES += \
WifiOverlay2023
# Trusty liboemcrypto.so
PRODUCT_SOONG_NAMESPACES += vendor/google_devices/shusky/prebuilts
# Location
PRODUCT_COPY_FILES += \
device/google/shusky/location/gps.cer:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.cer
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_COPY_FILES += \
device/google/shusky/location/lhd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
device/google/shusky/location/scd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf \
device/google/shusky/location/gps.xml:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
else
PRODUCT_COPY_FILES += \
device/google/shusky/location/lhd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
device/google/shusky/location/scd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf \
device/google/shusky/location/gps_user.xml:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
endif
# Set zram size
PRODUCT_VENDOR_PROPERTIES += \
vendor.zram.size=50p \
persist.device_config.configuration.disable_rescue_party=true
PRODUCT_VENDOR_PROPERTIES += \
persist.vendor.udfps.als_feed_forward_supported=true \
persist.vendor.udfps.lhbm_controlled_in_hal_supported=true
# Camera Vendor property
PRODUCT_VENDOR_PROPERTIES += \
persist.vendor.camera.front_720P_always_binning=true
# Vibrator HAL
ACTUATOR_MODEL := luxshare_ict_081545
PRODUCT_VENDOR_PROPERTIES += \
ro.vendor.vibrator.hal.chirp.enabled=0 \
ro.vendor.vibrator.hal.device.mass=0.222 \
ro.vendor.vibrator.hal.loc.coeff=2.8
# PKVM Memory Reclaim
PRODUCT_VENDOR_PROPERTIES += \
hypervisor.memory_reclaim.supported=1