tegu: Remove userdebug/eng configuration
Change-Id: I3739e6e099681c667c80723f0f6e3197923ff762
This commit is contained in:
Michael Bestas
Michael Bestas
parent
08c2886f1b
commit
2433b69efb
14 changed files with 2 additions and 158605 deletions
|
|
@ -5,15 +5,8 @@
|
|||
PRODUCT_COPY_FILES += \
|
||||
device/google/tegu/location/ca.pem:vendor/etc/gnss/ca.pem
|
||||
|
||||
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
|
||||
PRODUCT_COPY_FILES += \
|
||||
device/google/tegu/location/gps.cfg:vendor/etc/gnss/gps.cfg
|
||||
PRODUCT_VENDOR_PROPERTIES += \
|
||||
vendor.gps.aol.enabled=true
|
||||
else
|
||||
PRODUCT_COPY_FILES += \
|
||||
device/google/tegu/location/gps_user.cfg:vendor/etc/gnss/gps.cfg
|
||||
endif
|
||||
PRODUCT_COPY_FILES += \
|
||||
device/google/tegu/location/gps_user.cfg:vendor/etc/gnss/gps.cfg
|
||||
|
||||
# include pixel gnss hal service
|
||||
-include vendor/google_devices/zumapro/proprietary/gps/pixel_gnss_hal.mk
|
||||
|
|
|
|||
296
location/gps.cfg
296
location/gps.cfg
|
|
@ -1,296 +0,0 @@
|
|||
############################################
|
||||
GlueLayer_ToolConfigSelection=3
|
||||
debug_console=0
|
||||
debug_enable=4
|
||||
mem_dump_to_node=1
|
||||
force_instant_logging=0
|
||||
user_ports_tcp_name=Autotest
|
||||
user_ports_tcp_port=7555
|
||||
debug_dir=/data/vendor/gps/logs
|
||||
############################################
|
||||
GlueLayer_IsGedKeyExist=1
|
||||
GlueLayer_EnableGnssCfgInterface=1
|
||||
GlueLayer_IsUseCustomGnssLib=1
|
||||
|
||||
uni_log_max_file_count=5
|
||||
uni_log_max_size_mb=20
|
||||
uni_log_total_max_size_mb=100
|
||||
|
||||
# to enable ism stream for GAAM
|
||||
ism_stream_enable=1
|
||||
caplay_port_tcp_port=@GNSS_ISM_CAPTURE_PLAYBACK
|
||||
|
||||
gnss_device_type=K041
|
||||
gnss_device_patch_address=0
|
||||
gnss_device_patch_file=/vendor/firmware/kepler.bin
|
||||
|
||||
# 1pps timemark output: 0: disable 1: enable
|
||||
ChipCfg_Timemark_Option=1
|
||||
|
||||
# Enable/Disable 1PPS Time Sync policy
|
||||
Is1PPSTimeSyncEnable=1
|
||||
|
||||
# send debug req on MCW oddity
|
||||
#Chip_Configuration_Io_Options=0x85
|
||||
|
||||
# Disable dynamic HSI
|
||||
Chip_Configuration_Dynamic_HSI=0
|
||||
|
||||
# Set UBSAN to operate on logging mode on FW
|
||||
# 0: disable 1: crash mode 2: logging mode
|
||||
Chip_Configuration_ubsan_opt=2
|
||||
|
||||
# borrow this field to force CP crash on GAL bad ISM
|
||||
#Chip_Configuration_WT1=1
|
||||
|
||||
# Chip_Configuration_TrackerDebugMode = 0x10
|
||||
GlueLayer_IsPlatformRefTimeEnable=1
|
||||
|
||||
# enables CHPP for SPI port
|
||||
# uncomment the *chpp* lines below (and comment gnss_device-data_port_kepslim_present above) to use SPI+CHPP
|
||||
# when using CHPP, make sure to enable the CHPP defines in build_settings.mak
|
||||
chpp_betp_client=1
|
||||
chpp_log_level=2
|
||||
gnss_device_data_port_chpp_spi_device=/dev/gnss_ipc
|
||||
gnss_device_data_port_chpp_present=1
|
||||
|
||||
### Update for VTS ###
|
||||
GlueLayer_YearOfHW=2023
|
||||
scheduling_enabled=1
|
||||
|
||||
### temporarily disable precise time aiding ###
|
||||
Chip_Configuration_AidingConfiguration=0x00020046
|
||||
|
||||
# VDR End condition (meter, meter, sec, sec)
|
||||
ChipCfg_VDR_high_end_Distance = 200
|
||||
ChipCfg_VDR_low_end_Distance = 200
|
||||
ChipCfg_VDR_high_end_Time = 20
|
||||
ChipCfg_VDR_low_end_Time = 20
|
||||
|
||||
# set shared reference clock for freq aiding (0x20)
|
||||
# enable dcxo (0x04)
|
||||
Chip_Configuration_RefClkControl=0x24
|
||||
|
||||
### Override for DCXO Cnom/TuneValue
|
||||
#Chip_Configuration_DCXOtuneValue=3200
|
||||
|
||||
### DCXO Optional Parameters. #####
|
||||
# Can specify Crystal type, and/or over-ride T0-inflection point ####
|
||||
#
|
||||
# Optionally specify DXCO Crystal type, and operation mode
|
||||
# 8 bits. Lower 4 bits Crystal ID# (0-15)
|
||||
# Upper 4 bits Poly Configuration: (0/1)
|
||||
# Poly Configuration: 0: Use CP's poly, 1: Force use of default manufactures polynomial
|
||||
### Crystal Types:
|
||||
## 0 - Unknown/Default
|
||||
## 1 - Kyocera CT1612RB
|
||||
## 2 - NDK NX1612SD CS12311
|
||||
## 3 - NDK NX1612SD CS13950
|
||||
## 4 - NDK NX1612SD CS15298
|
||||
## 5 - KDS 7CG07680A10
|
||||
## 6- TXC 0W76870003
|
||||
## E.g. Use Kyocera, and ignore CP's polynomial: DCXO_CrystalType=0x11
|
||||
## E.g. Use KDS, and Use CP's polynomial: DCXO_CrystalType=0x05
|
||||
Chip_Configuration_DCXO_CrystalType=0x11
|
||||
|
||||
## Optionally specify DXCO Inflection point temperature, ####
|
||||
# This will override any default value or value in Crystal type ####
|
||||
# Value is degrees C x 100 E.g. 2855 = 28.55 deg C
|
||||
# Range should be 2000 to 3100
|
||||
#Chip_Configuration_DCXO_InflectionPoint=2855
|
||||
|
||||
# disable spam dog to avoid loss of position request
|
||||
spam_dog_ms=0
|
||||
# disable HW watchdog
|
||||
Chip_Configuration_WatchdogPeriod = 0
|
||||
|
||||
# GPS= 0x0001 GLO= 0x0002 GALILEO=0x0004 BEIDOU=0x0008 SBAS=0x0010 QZSS=0x0020
|
||||
# MEMS Static Detect=0x4000 MEMS Heading=0x2000
|
||||
### 2C48 L1 only MCW ###
|
||||
Chip_Configuration_GNSSConstConstraintDef=0x602F
|
||||
Chip_Configuration_RfMiscCtrl=0x80008001
|
||||
|
||||
# Certain constellation permission overriding LocTech config setting: only to possibly
|
||||
# disallow constellations allowed in LocTech, not vice versa. Note: GPS and GAL are
|
||||
# allowed in all markets so no such overriding.
|
||||
# 0: not to override (default), 1-disabled, 2- disabled if in US
|
||||
#gloUsedPolicy=2
|
||||
bdsUsedPolicy=2
|
||||
sbasUsedPolicy=2
|
||||
qzssUsedPolicy=2
|
||||
navicUsedPolicy=2
|
||||
|
||||
# DVS: 0 = Disabled (default), 1 = Enabled
|
||||
# DFS: 0 = Disabled (default), 1 = Enabled
|
||||
Chip_Configuration_FeatureCfg_DVS = 1
|
||||
Chip_Configuration_FeatureCfg_DFS = 1
|
||||
# MTPL: 0 = Disabled, 1 = Enabled (default)
|
||||
Chip_Configuration_FeatureCfg_MTPL=1
|
||||
|
||||
# This is a bitfield that will disable incoming interrupts for mailboxes
|
||||
# AP = 0x1
|
||||
# APM = 0x2
|
||||
# CP = 0x4
|
||||
# CHUB = 0x8
|
||||
# The CHUB on the neus continually triggers a bit so this is to prevent
|
||||
# it from continually waking the gnss.
|
||||
mailboxDisabled=0x0
|
||||
|
||||
### Specify RFIC ID for K40 ###
|
||||
# 55200001 = S5520 EVT1
|
||||
gnss_rfic_chip_id=55200001
|
||||
|
||||
# Uncomment to Disable SUPL
|
||||
#Aiding_AidingType=0
|
||||
# Uncomment to Disable SUPL (Ignore Android Framework Requests to Enable SUPL)
|
||||
#GlueLayer_EnableFwConfiguration=0
|
||||
|
||||
#Uncomment to disable SGEE
|
||||
#Sif_OperationMode=0
|
||||
|
||||
# Enables RTC time aiding from Host
|
||||
# 1 - enable, 0 - disable (default)
|
||||
UseRtcForAiding=1
|
||||
|
||||
# Min number of prior fixes needed for RTC time aiding
|
||||
rtc_min_num_of_fixes=10
|
||||
|
||||
# increase rtc uncertainty from Host to hedge against bad fixes
|
||||
additional_rtc_uncertainty_ms=10
|
||||
|
||||
# debug output time interval for LAL metrics logging (0 means disable)
|
||||
lal_metrics_interval_ms=0
|
||||
|
||||
# set to 1 for FW SGEE download - Requires Android FW to be properly configured
|
||||
Sif_UseFwXtraInterface=1
|
||||
|
||||
# Low power configurations
|
||||
# ACT C/No loss limit: 0dB to 15dB (0 = ACT is disabled by default) 3dB = 50% Duty Cycle, 6dB = 25% Duty Cycle, 9dB = 12.5% Duty Cycle
|
||||
Chip_Configuration_FeatureCfg_ACT = 5
|
||||
|
||||
ChipCfg_DspMemdumpEnable=1
|
||||
|
||||
Agnss_IsGloAidingEnable=1
|
||||
Agnss_IsGalAidingEnable=1
|
||||
Agnss_IsBdsAidingEnable=1
|
||||
Agnss_SuplUseCpNi=1
|
||||
Agnss_SuplAidIntvlCrossSess=1
|
||||
SETCaps_IsOtdoa=1
|
||||
SETCaps_IsLpp=1
|
||||
SETCaps_SuplUT1=20
|
||||
PosReq_Supl2Params_SuplNiUdpPort=7275
|
||||
GlueLayer_LPPCpBitmask=0xFF
|
||||
GlueLayer_IsCpLteNeighborCellEnable=1
|
||||
GlueLayer_isReqDBHFromFwRefLoc=1
|
||||
GlueLayer_isReqUBPFromPressureSensor=1
|
||||
GlueLayer_IsRilCIDReqEnable=0
|
||||
GlueLayer_IsMemsEnable=1
|
||||
GlueLayer_MeasCorrCap=7
|
||||
Chip_Configuration_mems_data_Configuration=5
|
||||
Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1
|
||||
CP_LocTech_PrimaryConst=0
|
||||
CP_LocTech_Constraints=1
|
||||
CP_LocTech_Requirements=0
|
||||
UP_LocTech_PrimaryConst=0
|
||||
UP_LocTech_Constraints=1
|
||||
UP_LocTech_Requirements=0
|
||||
SpotLogger_Allowed=0
|
||||
|
||||
RfPathLossDb_Ap=3800
|
||||
RfPathLossDb_Cp=3800
|
||||
NmeaBitmask=0x010003fff
|
||||
|
||||
# force engine to use entire response time for emergency session; default 0
|
||||
IsUseEntireRespTime911=1
|
||||
# force engine to engage high accuracy if entire response time used; default 0
|
||||
isForceHighAccuracyMode=1
|
||||
|
||||
# 0: Use calibrated Accel data 1: Use uncalibrated Accel data
|
||||
isUseUncalAccel=1
|
||||
|
||||
GNSS_CARRIER_CONFIG_BEGIN
|
||||
# DEFAULT
|
||||
GNSS_CARRIER_ID=0
|
||||
ENABLE_CAPS_OTDOA=1
|
||||
ENABLE_2G_CP_CAPS_MSA=1
|
||||
ENABLE_2G_CP_CAPS_MSB=1
|
||||
ENABLE_3G_CP_CAPS_MSA=1
|
||||
ENABLE_3G_CP_CAPS_MSB=1
|
||||
ENABLE_4G_CP_CAPS_MSA=1
|
||||
ENABLE_4G_CP_CAPS_MSB=1
|
||||
ENABLE_5G_CP_CAPS_MSA=1
|
||||
ENABLE_5G_CP_CAPS_MSB=1
|
||||
ENABLE_2G_UP_CAPS_MSA=1
|
||||
ENABLE_2G_UP_CAPS_MSB=1
|
||||
ENABLE_3G_UP_CAPS_MSA=1
|
||||
ENABLE_3G_UP_CAPS_MSB=1
|
||||
ENABLE_4G_UP_CAPS_MSA=1
|
||||
ENABLE_4G_UP_CAPS_MSB=1
|
||||
ENABLE_5G_UP_CAPS_MSA=0
|
||||
ENABLE_5G_UP_CAPS_MSB=0
|
||||
SUPL_SSL_METHOD=TLSv1_1
|
||||
SUPL_HMAC_HASH=SHA256
|
||||
SUPL_UT2_SEC=20
|
||||
SUPL_UT3_SEC=20
|
||||
ENABLE_LPP_CP=1
|
||||
ENABLE_LPP_UP=0
|
||||
ENABLE_LPPE_CP=3
|
||||
ENABLE_LPPE_UP=0
|
||||
ENABLE_NLP_ALONG_WITH_UBP=0
|
||||
ENABLE_NLP_IN_LPPE=1
|
||||
ENABLE_NLP_IN_AGNSS=0
|
||||
ENABLE_LPP_HA_GAD_SHAPE=0
|
||||
USE_EMER_PDN_FOR_EMER_SUPL=1
|
||||
CP_LOCTECH_CONSTRAINTS=1
|
||||
UP_LOCTECH_CONSTRAINTS=1
|
||||
# ATT
|
||||
GNSS_CARRIER_ID=1
|
||||
CP_LOCTECH_CONSTRAINTS=5
|
||||
# TMO
|
||||
GNSS_CARRIER_ID=2
|
||||
ENABLE_3G_CP_CAPS_MSA=0
|
||||
ENABLE_4G_CP_CAPS_MSA=0
|
||||
ENABLE_NLP_IN_LPPE=0
|
||||
ENABLE_NLP_IN_AGNSS=1
|
||||
ENABLE_LPP_HA_GAD_SHAPE=1
|
||||
# VZW
|
||||
GNSS_CARRIER_ID=3
|
||||
ENABLE_LPP_UP=1
|
||||
ENABLE_LPPE_UP=3
|
||||
SUPL_UT2_SEC=10
|
||||
SUPL_UT3_SEC=30
|
||||
SUPL_SSL_METHOD=TLSv1_2
|
||||
# AIRTEL
|
||||
GNSS_CARRIER_ID=4
|
||||
# RAKUTEN
|
||||
GNSS_CARRIER_ID=5
|
||||
ENABLE_LPP_UP=1
|
||||
ENABLE_LPPE_UP=3
|
||||
# KDDI
|
||||
GNSS_CARRIER_ID=6
|
||||
ENABLE_CAPS_OTDOA=0
|
||||
ENABLE_LPP_CP=0
|
||||
ENABLE_LPP_UP=1
|
||||
ENABLE_LPPE_CP=0
|
||||
ENABLE_LPPE_UP=3
|
||||
ENABLE_2G_UP_CAPS_MSA=0
|
||||
ENABLE_3G_UP_CAPS_MSA=0
|
||||
ENABLE_4G_UP_CAPS_MSA=0
|
||||
# SBM
|
||||
GNSS_CARRIER_ID=7
|
||||
ENABLE_LPP_CP=0
|
||||
ENABLE_LPPE_CP=0
|
||||
ENABLE_5G_CP_CAPS_MSA=0
|
||||
ENABLE_5G_CP_CAPS_MSB=0
|
||||
USE_EMER_PDN_FOR_EMER_SUPL=0
|
||||
# DOCOMO
|
||||
GNSS_CARRIER_ID=8
|
||||
# LAB
|
||||
GNSS_CARRIER_ID=9
|
||||
ENABLE_LPP_UP=1
|
||||
ENABLE_LPPE_UP=3
|
||||
# TELUS
|
||||
GNSS_CARRIER_ID=10
|
||||
ENABLE_5G_CP_CAPS_MSA=0
|
||||
ENABLE_5G_CP_CAPS_MSB=0
|
||||
GNSS_CARRIER_CONFIG_END
|
||||
Loading…
Add table
Add a link
Reference in a new issue