Remove the below power rails as they're going to be replaced with
different ones for better ODPM coverage.
- S8S_VDD_G3D_L2
- L9S_GNSS_CORE
Bug: 331556280
Test: Push config and verify thermal logs
Change-Id: I5a04e715bf49a6c4ee502eb82ca18795cff3eb9a
powerhint: port changes from p23
- Add DISPLAY_CHANGE powerhint
- Add more boosts to LAUNCH_EXTEND
- Remove unused idle target residency settings
powerhint: port migration margin settings from p23
Bug: 316035859
powerhint: port dvfs_headroom settings from p23
Bug: 322000346
powerhint: revert dvfs_headroom settings for camera
Bug: 329905546
Change set preferred idle mask to top-app
Set default value to 0x7f to exclude big core for all priorities, but
restore high and mid to 0xff when app launch.
Bug: 248621289
Test: Boot to home
Bug: 330085013
Change-Id: Iab5c9534c0f59bc2cf6dff6e90b0b97fcfa8ebc1
- File is from b/313341617#comment63
- New current limit setting range is from 0 ~ 36 (1.5A ~ 5.1A)
- Current limit value = 1.5A + index * 0.1A
Bug: 313341617
Test: manual test
Change-Id: I7203017bdc10f549312c42a307cff7548ef0d2c7
Signed-off-by: Robert Lee <lerobert@google.com>
Change back the digital volume from 47 to 55.
Bug: 313341617
Test: manual test
Change-Id: I274625317c3b256a7ac7bc9de4b8ce7f79fca59f
Signed-off-by: Robert Lee <lerobert@google.com>
note:
- Basically sync everyhing from caimito
- But keep builtin_mic setup for tegu.
- Sync waves_config.ini from caimito
- Sync volume curve from caimito
- Enable HAC and gain control.
Bug: 313341617
Test: builds pass
Change-Id: I2f891d943056c05762acdbffdd1b3b6da0c03c8d
Signed-off-by: Robert Lee <lerobert@google.com>
note:
- Enable HAC amp
- Fine-tune TI amp D gain for voice-hac and voice-handset mode
Test: Build pass and verified by acoustic team.
Bug: 330086792
Change-Id: Ie13aaedc072a0647b25685849fa78208b87473c5
ti_sp_tuning.bin is from PreModel.bin in b/313341617#comment54
Bug: 313341617
Test: manual
Change-Id: I63943a926e8bf1743cddad4adfbf52d8b2a8d2a4
Signed-off-by: Robert Lee <lerobert@google.com>
Update the package overlay order to apply device specific display
settings.
Bug: 316868583
Bug: 316356788
Test: smooth display is off after factory reset
Change-Id: Id8573ccdd451ae31ac8a0bb22abfa90232bb40c2
This is part of an optimization that limits the length and prevelance of
this power hint. Strict, ultra-agression minimizes power and latency
versus always-on mid aggression.
Bug: 297964952
Change-Id: I57a0d63d1846619e32cb6c9b8ff924aa6722a964
note:
1. Based on default ROM tuning adding 18kHz Low Pass filter.
2. It will help IMU performance.
Test: HW team verified.
Bug: 328730202
Change-Id: Iebc2ea2b66970ab9abe917997a173df4ca2cb08f
note:
Fortemedia tables for FM V6.4.1/V6.4.2:
Sync table version
Bug: 328323915
Test: HW team verified.
Change-Id: I0e72caba64a0a86cfb800b24961d9c121f67e40f
This is part of an optimization that limits the length and prevelance of
this power hint. Strict, ultra-agression minimizes power and latency
versus always-on mid aggression.
Bug: 297964952
Change-Id: I57a0d63d1846619e32cb6c9b8ff924aa6722a964
