This CL increase SPC threshold for little core to 55, and for mid core
to 32. Tests show that in a loaded scenario, framedrop rate can reduce
to almost zero, while not impacting the power in the unloaded (baseline)
scenario.
Refer to ag/27032799 and ag/27078536
Bug: 342502377
Test: Build pass
Change-Id: I9c50b58483cb5262c3550cb45907cbe522eb4e5a
SPC threshold is too low for both Little and Mid cores. This CL increases this
threshold to 55 for Little Core and to 30 for Mid core.
Test results show lower framedrop rate in presence of background load,
without having a negative impact on the power.
Refer to ag/26943567 and ag/27018139
Bug: 342502377
Test: Build pass
Change-Id: I593b9ca4f85e844ebacdb8606147d51c9d8926da
CAMERA_STREAMING_HIGH:
CPUSkipMask to 0x80
MemFreq to 1539000
Enable CDPreferIdle
CDCpuset to 0-6
CAMERA_STREAMING_STANDARD:
CPUSkipMask to 0x80
TAPreferIdle to 0
Enable CDPreferIdle
CDCpuset to 0-6
Refer to ag/26718992, ag/26787527 and ag/26710529
Bug: 342502377
Test: Build pass
Change-Id: Id1ba596588bf51c3847c0c5a9f9d72adc8888f19
Add the "UclampMax_EfficientBase" value to the ADPF config in the
powerhint.json to specify efficient core scheduling in the static
case, and "UclampMax_EfficientOffset" for the dynamic case, for this
device.
Bug: 277285195
Test: manual
Change-Id: I858da8b21739d946f21c9cdda2277f34723836f3
powerhint: port changes from p23
- Add DISPLAY_CHANGE powerhint
- Add more boosts to LAUNCH_EXTEND
- Remove unused idle target residency settings
powerhint: port migration margin settings from p23
Bug: 316035859
powerhint: port dvfs_headroom settings from p23
Bug: 322000346
powerhint: revert dvfs_headroom settings for camera
Bug: 329905546
Change set preferred idle mask to top-app
Set default value to 0x7f to exclude big core for all priorities, but
restore high and mid to 0xff when app launch.
Bug: 248621289
Test: Boot to home
Bug: 330085013
Change-Id: Iab5c9534c0f59bc2cf6dff6e90b0b97fcfa8ebc1
This is part of an optimization that limits the length and prevelance of
this power hint. Strict, ultra-agression minimizes power and latency
versus always-on mid aggression.
Bug: 297964952
Change-Id: I57a0d63d1846619e32cb6c9b8ff924aa6722a964
This is part of an optimization that limits the length and prevelance of
this power hint. Strict, ultra-agression minimizes power and latency
versus always-on mid aggression.
Bug: 297964952
Change-Id: I57a0d63d1846619e32cb6c9b8ff924aa6722a964
powerhint: set cpd target residency to 10ms
Correct the powerhint and thermal config
thermal: optimize thermal policy for camera mode
powerhint: port powerhints from zuma and update with latest hardware
Bug: 318455627
Test: boot to home
Change-Id: I3da635fb9015a5f35a4238e0e38da385570c11c8
Vendor sched procfs path hierarchy gets updated in kernel.
Update the paths in powerhint json file to match the change.
Bug: 289151587
Test: Manual
Change-Id: I347d736284b61a272e275f5145d89499873545bd
