8761b1683b
Provide config control to allow SUPL re-aiding interval applied to cross-session scenario also Bug: 326870338 Test: b/350387620 atest CtsLocationGnssTestCases atest VtsHalGnssTargetTest Change-Id: I985e4c7eac1a755f0f88f16c989cd1a42b01ff11
278 lines
7.2 KiB
INI
278 lines
7.2 KiB
INI
############################################
|
|
GlueLayer_ToolConfigSelection=3
|
|
debug_console=0
|
|
debug_enable=4
|
|
mem_dump_to_node=1
|
|
force_instant_logging=0
|
|
user_ports_tcp_name=Autotest
|
|
user_ports_tcp_port=7555
|
|
debug_dir=/data/vendor/gps/logs
|
|
############################################
|
|
GlueLayer_IsGedKeyExist=1
|
|
GlueLayer_EnableGnssCfgInterface=1
|
|
GlueLayer_IsUseCustomGnssLib=1
|
|
|
|
uni_log_max_file_count=5
|
|
uni_log_max_size_mb=20
|
|
uni_log_total_max_size_mb=100
|
|
|
|
# to enable ism stream for GAAM
|
|
ism_stream_enable=1
|
|
caplay_port_tcp_port=@GNSS_ISM_CAPTURE_PLAYBACK
|
|
|
|
gnss_device_type=K041
|
|
gnss_device_patch_address=0
|
|
gnss_device_patch_file=/vendor/firmware/kepler.bin
|
|
|
|
# Enable/Disable 1PPS Time Sync policy
|
|
Is1PPSTimeSyncEnable=1
|
|
|
|
# send debug req on MCW oddity
|
|
#Chip_Configuration_Io_Options=0x85
|
|
|
|
# Disable dynamic HSI
|
|
Chip_Configuration_Dynamic_HSI=0
|
|
|
|
# Set UBSAN to operate on logging mode on FW
|
|
Chip_Configuration_ubsan_opt=1
|
|
|
|
# borrow this field to force CP crash on GAL bad ISM
|
|
#Chip_Configuration_WT1=1
|
|
|
|
# Chip_Configuration_TrackerDebugMode = 0x10
|
|
GlueLayer_IsPlatformRefTimeEnable=1
|
|
|
|
# enables CHPP for SPI port
|
|
# uncomment the *chpp* lines below (and comment gnss_device-data_port_kepslim_present above) to use SPI+CHPP
|
|
# when using CHPP, make sure to enable the CHPP defines in build_settings.mak
|
|
chpp_betp_client=1
|
|
chpp_log_level=2
|
|
gnss_device_data_port_chpp_spi_device=/dev/gnss_ipc
|
|
gnss_device_data_port_chpp_present=1
|
|
|
|
### Update for VTS ###
|
|
GlueLayer_YearOfHW=2023
|
|
scheduling_enabled=1
|
|
|
|
### temporarily disable precise time aiding ###
|
|
Chip_Configuration_AidingConfiguration=0x00020046
|
|
|
|
# VDR End condition (meter, meter, sec, sec)
|
|
ChipCfg_VDR_high_end_Distance = 200
|
|
ChipCfg_VDR_low_end_Distance = 200
|
|
ChipCfg_VDR_high_end_Time = 20
|
|
ChipCfg_VDR_low_end_Time = 20
|
|
|
|
# set shared reference clock for freq aiding (0x20)
|
|
# enable dcxo (0x04)
|
|
Chip_Configuration_RefClkControl=0x24
|
|
|
|
### Override for DCXO Cnom/TuneValue
|
|
#Chip_Configuration_DCXOtuneValue=3200
|
|
|
|
### DCXO Optional Parameters. #####
|
|
# Can specify Crystal type, and/or over-ride T0-inflection point ####
|
|
#
|
|
# Optionally specify DXCO Crystal type, and operation mode
|
|
# 8 bits. Lower 4 bits Crystal ID# (0-15)
|
|
# Upper 4 bits Poly Configuration: (0/1)
|
|
# Poly Configuration: 0: Use CP's poly, 1: Force use of default manufactures polynomial
|
|
### Crystal Types:
|
|
## 0 - Unknown/Default
|
|
## 1 - Kyocera CT1612RB
|
|
## 2 - NDK NX1612SD CS12311
|
|
## 3 - NDK NX1612SD CS13950
|
|
## 4 - NDK NX1612SD CS15298
|
|
## 5 - KDS 7CG07680A10
|
|
## 6- TXC 0W76870003
|
|
## E.g. Use Kyocera, and ignore CP's polynomial: DCXO_CrystalType=0x11
|
|
## E.g. Use KDS, and Use CP's polynomial: DCXO_CrystalType=0x05
|
|
Chip_Configuration_DCXO_CrystalType=0x11
|
|
|
|
## Optionally specify DXCO Inflection point temperature, ####
|
|
# This will override any default value or value in Crystal type ####
|
|
# Value is degrees C x 100 E.g. 2855 = 28.55 deg C
|
|
# Range should be 2000 to 3100
|
|
#Chip_Configuration_DCXO_InflectionPoint=2855
|
|
|
|
# disable spam dog to avoid loss of position request
|
|
spam_dog_ms=0
|
|
# disable HW watchdog
|
|
Chip_Configuration_WatchdogPeriod = 0
|
|
|
|
# GPS= 0x0001 GLO= 0x0002 GALILEO=0x0004 BEIDOU=0x0008 SBAS=0x0010 QZSS=0x0020
|
|
# MEMS Static Detect=0x4000 MEMS Heading=0x2000
|
|
### 2C48 L1 only MCW ###
|
|
Chip_Configuration_GNSSConstConstraintDef=0x602F
|
|
Chip_Configuration_RfMiscCtrl=0x80008001
|
|
|
|
# Disable BDS in the U.S.
|
|
bdsUsedInUSPolicy=2
|
|
sbasUsedInUSPolicy=2
|
|
qzssUsedInUSPolicy=2
|
|
navicUsedInUSPolicy=2
|
|
|
|
# DVS: 0 = Disabled (default), 1 = Enabled
|
|
# DFS: 0 = Disabled (default), 1 = Enabled
|
|
Chip_Configuration_FeatureCfg_DVS = 1
|
|
Chip_Configuration_FeatureCfg_DFS = 1
|
|
# MTPL: 0 = Disabled, 1 = Enabled (default)
|
|
Chip_Configuration_FeatureCfg_MTPL=0
|
|
|
|
# This is a bitfield that will disable incoming interrupts for mailboxes
|
|
# AP = 0x1
|
|
# APM = 0x2
|
|
# CP = 0x4
|
|
# CHUB = 0x8
|
|
# The CHUB on the neus continually triggers a bit so this is to prevent
|
|
# it from continually waking the gnss.
|
|
mailboxDisabled=0x0
|
|
|
|
### Specify RFIC ID for K40 ###
|
|
# 55200001 = S5520 EVT1
|
|
gnss_rfic_chip_id=55200001
|
|
|
|
# Uncomment to Disable SUPL
|
|
#Aiding_AidingType=0
|
|
# Uncomment to Disable SUPL (Ignore Android Framework Requests to Enable SUPL)
|
|
#GlueLayer_EnableFwConfiguration=0
|
|
|
|
#Uncomment to disable SGEE
|
|
#Sif_OperationMode=0
|
|
|
|
# Enables RTC time aiding from Host
|
|
# 1 - enable, 0 - disable (default)
|
|
UseRtcForAiding=1
|
|
|
|
# Min number of prior fixes needed for RTC time aiding
|
|
rtc_min_num_of_fixes=10
|
|
|
|
# increase rtc uncertainty from Host to hedge against bad fixes
|
|
additional_rtc_uncertainty_ms=10
|
|
|
|
# set to 1 for FW SGEE download - Requires Android FW to be properly configured
|
|
Sif_UseFwXtraInterface=1
|
|
|
|
# Low power configurations
|
|
# ACT C/No loss limit: 0dB to 15dB (0 = ACT is disabled by default) 3dB = 50% Duty Cycle, 6dB = 25% Duty Cycle, 9dB = 12.5% Duty Cycle
|
|
Chip_Configuration_FeatureCfg_ACT = 5
|
|
|
|
ChipCfg_DspMemdumpEnable=1
|
|
|
|
Agnss_IsGloAidingEnable=0
|
|
Agnss_SuplUseCpNi=1
|
|
Agnss_SuplAidIntvlCrossSess=1
|
|
SETCaps_IsOtdoa=1
|
|
SETCaps_IsLpp=1
|
|
SETCaps_SuplUT1=20
|
|
PosReq_Supl2Params_SuplNiUdpPort=7275
|
|
GlueLayer_LPPCpBitmask=0xFF
|
|
GlueLayer_IsCpLteNeighborCellEnable=1
|
|
GlueLayer_isReqDBHFromFwRefLoc=1
|
|
GlueLayer_isReqUBPFromPressureSensor=1
|
|
GlueLayer_IsRilCIDReqEnable=0
|
|
GlueLayer_IsMemsEnable=1
|
|
GlueLayer_MeasCorrCap=7
|
|
Chip_Configuration_mems_data_Configuration=5
|
|
Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1
|
|
CP_LocTech_PrimaryConst=0
|
|
CP_LocTech_Constraints=1
|
|
CP_LocTech_Requirements=0
|
|
UP_LocTech_PrimaryConst=0
|
|
UP_LocTech_Constraints=1
|
|
UP_LocTech_Requirements=0
|
|
SpotLogger_Allowed=0
|
|
|
|
RfPathLossDb_Ap=3800
|
|
RfPathLossDb_Cp=3800
|
|
NmeaBitmask=0x010003fff
|
|
|
|
# force engine to use entire response time for emergency session; default 0
|
|
IsUseEntireRespTime911=1
|
|
# force engine to engage high accuracy if entire response time used; default 0
|
|
isForceHighAccuracyMode=1
|
|
|
|
# 0: Use calibrated Accel data 1: Use uncalibrated Accel data
|
|
isUseUncalAccel=1
|
|
|
|
GNSS_CARRIER_CONFIG_BEGIN
|
|
# DEFAULT
|
|
GNSS_CARRIER_ID=0
|
|
ENABLE_CAPS_OTDOA=1
|
|
ENABLE_2G_CP_CAPS_MSA=1
|
|
ENABLE_2G_CP_CAPS_MSB=1
|
|
ENABLE_3G_CP_CAPS_MSA=1
|
|
ENABLE_3G_CP_CAPS_MSB=1
|
|
ENABLE_4G_CP_CAPS_MSA=1
|
|
ENABLE_4G_CP_CAPS_MSB=1
|
|
ENABLE_5G_CP_CAPS_MSA=1
|
|
ENABLE_5G_CP_CAPS_MSB=1
|
|
ENABLE_2G_UP_CAPS_MSA=1
|
|
ENABLE_2G_UP_CAPS_MSB=1
|
|
ENABLE_3G_UP_CAPS_MSA=1
|
|
ENABLE_3G_UP_CAPS_MSB=1
|
|
ENABLE_4G_UP_CAPS_MSA=1
|
|
ENABLE_4G_UP_CAPS_MSB=1
|
|
ENABLE_5G_UP_CAPS_MSA=0
|
|
ENABLE_5G_UP_CAPS_MSB=0
|
|
SUPL_SSL_METHOD=TLSv1_1
|
|
SUPL_HMAC_HASH=SHA256
|
|
SUPL_UT2_SEC=20
|
|
SUPL_UT3_SEC=20
|
|
ENABLE_LPP_CP=1
|
|
ENABLE_LPP_UP=0
|
|
ENABLE_LPPE_CP=3
|
|
ENABLE_LPPE_UP=0
|
|
ENABLE_NLP_IN_LPPE=1
|
|
ENABLE_NLP_IN_AGNSS=0
|
|
ENABLE_LPP_HA_GAD_SHAPE=0
|
|
USE_EMER_PDN_FOR_EMER_SUPL=1
|
|
# ATT
|
|
GNSS_CARRIER_ID=1
|
|
# TMO
|
|
GNSS_CARRIER_ID=2
|
|
ENABLE_3G_CP_CAPS_MSA=0
|
|
ENABLE_4G_CP_CAPS_MSA=0
|
|
ENABLE_NLP_IN_LPPE=0
|
|
ENABLE_NLP_IN_AGNSS=1
|
|
ENABLE_LPP_HA_GAD_SHAPE=1
|
|
# VZW
|
|
GNSS_CARRIER_ID=3
|
|
ENABLE_LPP_UP=1
|
|
ENABLE_LPPE_UP=3
|
|
SUPL_UT2_SEC=10
|
|
SUPL_UT3_SEC=30
|
|
SUPL_SSL_METHOD=TLSv1_2
|
|
# AIRTEL
|
|
GNSS_CARRIER_ID=4
|
|
# RAKUTEN
|
|
GNSS_CARRIER_ID=5
|
|
ENABLE_LPP_UP=1
|
|
ENABLE_LPPE_UP=3
|
|
# KDDI
|
|
GNSS_CARRIER_ID=6
|
|
ENABLE_LPP_CP=0
|
|
ENABLE_LPP_UP=1
|
|
ENABLE_LPPE_CP=0
|
|
ENABLE_LPPE_UP=3
|
|
ENABLE_2G_UP_CAPS_MSA=0
|
|
ENABLE_3G_UP_CAPS_MSA=0
|
|
ENABLE_4G_UP_CAPS_MSA=0
|
|
# SBM
|
|
GNSS_CARRIER_ID=7
|
|
ENABLE_LPP_CP=0
|
|
ENABLE_LPPE_CP=0
|
|
ENABLE_5G_CP_CAPS_MSA=0
|
|
ENABLE_5G_CP_CAPS_MSB=0
|
|
USE_EMER_PDN_FOR_EMER_SUPL=0
|
|
# DOCOMO
|
|
GNSS_CARRIER_ID=8
|
|
# LAB
|
|
GNSS_CARRIER_ID=9
|
|
ENABLE_LPP_UP=1
|
|
ENABLE_LPPE_UP=3
|
|
# TELUS
|
|
GNSS_CARRIER_ID=10
|
|
ENABLE_5G_CP_CAPS_MSA=0
|
|
ENABLE_5G_CP_CAPS_MSB=0
|
|
GNSS_CARRIER_CONFIG_END
|