Evolution-X-Tensor/device_google_zumapro
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
device_google_zumapro/device.mk
Robin Peng 4f5da1bfa9 Remove settings for old ArmNN HIDL backend 
Compile ArmNN shim over the support library.

Remove SELinux permissions and settings for the old HIDL backend.
The AIDL settings will be in the gs-common folder.

Test: build pass
Bug: 283724775
Bug: 292364331
Bug: 292443970
Change-Id: If7147eba78fbab93ea5c772582570caf0b868225
2023-07-24 08:28:28 +00:00

1145 lines
39 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2011 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
include device/google/gs-common/device.mk
include device/google/gs-common/gs_watchdogd/watchdog.mk
include device/google/gs-common/ramdump/ramdump.mk
include device/google/gs-common/soc/soc.mk
include device/google/gs-common/modem/modem.mk
include device/google/gs-common/aoc/aoc.mk
include device/google/gs-common/trusty/trusty.mk
include device/google/gs-common/pcie/pcie.mk
include device/google/gs-common/storage/storage.mk
include device/google/gs-common/thermal/thermal.mk
include device/google/gs-common/performance/perf.mk
include device/google/gs-common/pixel_metrics/pixel_metrics.mk
include device/google/gs-common/soc/freq.mk
include device/google/gs-common/gps/dump/log.mk
include device/google/gs-common/display/dump.mk
include device/google/gs-common/gxp/dump.mk
include device/google/gs-common/camera/dump.mk
include device/google/gs-common/radio/dump.mk
include device/google/gs-common/gear/dumpstate/aidl.mk
include device/google/gs-common/widevine/widevine.mk
include device/google/gs-common/sota_app/factoryota.mk
include device/google/gs-common/misc_writer/misc_writer.mk
include device/google/zumapro/dumpstate/item.mk
ifneq ($(BOARD_WITHOUT_RADIO),true)
include device/google/gs-common/gps/brcm/device_v2.mk
endif
# TODO(b/272725898): Needs to check with owner later
$(warning TARGET_BOARD_PLATFORM set to zuma on zumapro target)
TARGET_BOARD_PLATFORM := zuma
ALLOW_MISSING_DEPENDENCIES := true
AB_OTA_POSTINSTALL_CONFIG += \
RUN_POSTINSTALL_system=true \
POSTINSTALL_PATH_system=system/bin/otapreopt_script \
FILESYSTEM_TYPE_system=ext4 \
POSTINSTALL_OPTIONAL_system=true
# Set Vendor SPL to match platform
VENDOR_SECURITY_PATCH = $(PLATFORM_SECURITY_PATCH)
# Set boot SPL
BOOT_SECURITY_PATCH = $(PLATFORM_SECURITY_PATCH)
# TODO(b/207450311): Remove this flag once implemented
USE_PIXEL_GRALLOC := false
ifeq ($(USE_PIXEL_GRALLOC),true)
PRODUCT_SOONG_NAMESPACES += hardware/google/gchips/GrallocHAL
endif
# TODO(b/272725898): Needs to check with owner later
$(warning hardware/google/graphics/zuma set to zuma on zumapro target)
PRODUCT_SOONG_NAMESPACES += \
hardware/google/av \
hardware/google/gchips \
hardware/google/gchips/gralloc4 \
hardware/google/graphics/common \
hardware/google/graphics/zuma \
hardware/google/interfaces \
hardware/google/pixel \
device/google/zumapro \
device/google/zumapro/powerstats \
system/chre/host/hal_generic \
vendor/google/whitechapel/tools \
vendor/google/interfaces \
vendor/google_devices/common/proprietary/confirmatioui_hal \
vendor/google_nos/host/android \
vendor/google_nos/test/system-test-harness \
vendor/google/camera
LOCAL_KERNEL := $(TARGET_KERNEL_DIR)/Image.lz4
# Set the environment variable to switch the Keymint HAL service to Rust
TRUSTY_KEYMINT_IMPL := rust
# OEM Unlock reporting
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
ro.oem_unlock_supported=1
# Include vendor telephony soong namespace
PRODUCT_SOONG_NAMESPACES += \
vendor/samsung_slsi/telephony/$(BOARD_USES_SHARED_VENDOR_TELEPHONY)
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
#Set IKE logs to verbose for WFC
PRODUCT_PROPERTY_OVERRIDES += log.tag.IKE=VERBOSE
#Set Shannon IMS logs to debug
PRODUCT_PROPERTY_OVERRIDES += log.tag.SHANNON_IMS=DEBUG
#Set Shannon QNS logs to debug
PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS=DEBUG
PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS-ims=DEBUG
PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS-emergency=DEBUG
PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS-mms=DEBUG
PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS-xcap=DEBUG
PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS-HC=DEBUG
# Modem userdebug
include device/google/zumapro/modem/userdebug.mk
endif
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
# b/36703476: Set default log size to 1M
PRODUCT_PROPERTY_OVERRIDES += \
ro.logd.size=1M
# b/114766334: persist all logs by default rotating on 30 files of 1MiB
PRODUCT_PROPERTY_OVERRIDES += \
logd.logpersistd=logcatd \
logd.logpersistd.size=30
endif
# From system.property
PRODUCT_PROPERTY_OVERRIDES += \
ro.telephony.default_network=27 \
persist.vendor.ril.db_ecc.use.iccid_to_plmn=1 \
persist.vendor.ril.db_ecc.id.type=5
#rild.libpath=/system/lib64/libsec-ril.so \
#rild.libargs=-d /dev/umts_ipc0
# SIT-RIL Logging setting
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.ril.log_mask=3 \
persist.vendor.ril.log.base_dir=/data/vendor/radio/sit-ril \
persist.vendor.ril.log.chunk_size=5242880 \
persist.vendor.ril.log.num_file=3
# Enable reboot free DSDS
PRODUCT_PRODUCT_PROPERTIES += \
persist.radio.reboot_on_modem_change=false
# Configure DSDS by default
PRODUCT_PRODUCT_PROPERTIES += \
persist.radio.multisim.config=dsds
# Enable Early Camping
PRODUCT_PRODUCT_PROPERTIES += \
persist.vendor.ril.camp_on_earlier=1
# Enable SET_SCREEN_STATE request
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.ril.enable_set_screen_state=1
# Set the Bluetooth Class of Device
# Service Field: 0x5A -> 90
# Bit 14: LE audio
# Bit 17: Networking
# Bit 19: Capturing
# Bit 20: Object Transfer
# Bit 22: Telephony
# MAJOR_CLASS: 0x42 -> 66 (Phone)
# MINOR_CLASS: 0x0C -> 12 (Smart Phone)
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.device.class_of_device=90,66,12
# Set supported Bluetooth profiles to enabled
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.profile.asha.central.enabled=true \
bluetooth.profile.a2dp.source.enabled=true \
bluetooth.profile.avrcp.target.enabled=true \
bluetooth.profile.bap.broadcast.assist.enabled=true \
bluetooth.profile.bap.unicast.server.enabled=true \
bluetooth.profile.bas.client.enabled=true \
bluetooth.profile.csip.set_coordinator.enabled=true \
bluetooth.profile.gatt.enabled=true \
bluetooth.profile.hap.client.enabled=true \
bluetooth.profile.hfp.ag.enabled=true \
bluetooth.profile.hid.device.enabled=true \
bluetooth.profile.hid.host.enabled=true \
bluetooth.profile.map.server.enabled=true \
bluetooth.profile.mcp.server.enabled=true \
bluetooth.profile.opp.enabled=true \
bluetooth.profile.pan.nap.enabled=true \
bluetooth.profile.pan.panu.enabled=true \
bluetooth.profile.pbap.server.enabled=true \
bluetooth.profile.sap.server.enabled=true \
bluetooth.profile.tbs.server.enabled=true \
bluetooth.profile.vc.server.enabled=true
# Carrier configuration default location
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.radio.config.carrier_config_dir=/mnt/vendor/modem_img/images/default/confpack
PRODUCT_PROPERTY_OVERRIDES += \
telephony.active_modems.max_count=2
USE_LASSEN_OEMHOOK := true
# Use for GRIL
USES_LASSEN_MODEM := true
ifeq ($(USES_GOOGLE_DIALER_CARRIER_SETTINGS),true)
USE_GOOGLE_DIALER := true
USE_GOOGLE_CARRIER_SETTINGS := true
endif
# Audio client implementation for RIL
USES_GAUDIO := true
# ######################
# GRAPHICS - GPU (begin)
# Must match BOARD_USES_SWIFTSHADER in BoardConfig.mk
USE_SWIFTSHADER := false
# HWUI
TARGET_USES_VULKAN = true
PRODUCT_SOONG_NAMESPACES += \
vendor/arm/mali/valhall
$(call soong_config_set,pixel_mali,soc,$(TARGET_BOARD_PLATFORM))
$(call soong_config_set,arm_gralloc,soc,$(TARGET_BOARD_PLATFORM))
include device/google/gs-common/gpu/gpu.mk
PRODUCT_PACKAGES += \
csffw_image_prebuilt__firmware_prebuilt_ttux_mali_csffw.bin \
libGLES_mali \
vulkan.mali \
libOpenCL \
libgpudataproducer
ifeq ($(USE_SWIFTSHADER),true)
PRODUCT_PACKAGES += \
libEGL_angle \
libGLESv1_CM_angle \
libGLESv2_angle \
vulkan.pastel
PRODUCT_VENDOR_PROPERTIES += \
ro.hardware.egl=angle \
ro.hardware.vulkan=pastel
else
PRODUCT_VENDOR_PROPERTIES += \
ro.hardware.egl=mali \
ro.hardware.vulkan=mali
endif
# Mali Configuration Properties
# b/221255664 prevents setting PROTECTED_MAX_CORE_COUNT=2
PRODUCT_VENDOR_PROPERTIES += \
vendor.mali.protected_max_core_count=1 \
vendor.mali.protected_tls_max=67108864 \
vendor.mali.platform_agt_frequency_khz=24576
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.opengles.aep.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.opengles.aep.xml \
frameworks/native/data/etc/android.hardware.vulkan.version-1_3.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.version.xml \
frameworks/native/data/etc/android.hardware.vulkan.level-1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.level.xml \
frameworks/native/data/etc/android.hardware.vulkan.compute-0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.compute.xml \
frameworks/native/data/etc/android.software.vulkan.deqp.level-2021-03-01.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.vulkan.deqp.level.xml \
frameworks/native/data/etc/android.software.opengles.deqp.level-2021-03-01.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.opengles.deqp.level.xml
#endif
# Configure EGL blobcache
PRODUCT_VENDOR_PROPERTIES += \
ro.egl.blobcache.multifile=true \
ro.egl.blobcache.multifile_limit=33554432 \
PRODUCT_VENDOR_PROPERTIES += \
ro.opengles.version=196610 \
graphics.gpu.profiler.support=true \
debug.renderengine.backend=skiavkthreaded \
# GRAPHICS - GPU (end)
# ####################
# Device Manifest, Device Compatibility Matrix for Treble
DEVICE_MANIFEST_FILE := \
device/google/zumapro/manifest.xml
ifneq (,$(filter aosp_%,$(TARGET_PRODUCT)))
DEVICE_MANIFEST_FILE += \
device/google/zumapro/manifest_media_aosp.xml
PRODUCT_COPY_FILES += \
device/google/zumapro/media_codecs_aosp_c2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_c2.xml
else
DEVICE_MANIFEST_FILE += \
device/google/zumapro/manifest_media.xml
PRODUCT_COPY_FILES += \
device/google/zumapro/media_codecs_bo_c2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_c2.xml \
device/google/zumapro/media_codecs_aosp_c2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_aosp_c2.xml
endif
DEVICE_MATRIX_FILE := \
device/google/zumapro/compatibility_matrix.xml
DEVICE_PACKAGE_OVERLAYS += device/google/zumapro/overlay
# This will be updated to 34 (Android U) for shipping
PRODUCT_SHIPPING_API_LEVEL := 33
# RKP VINTF
-include vendor/google_nos/host/android/hals/keymaster/aidl/strongbox/RemotelyProvisionedComponent-citadel.mk
# Enforce the Product interface
PRODUCT_PRODUCT_VNDK_VERSION := current
PRODUCT_ENFORCE_PRODUCT_PARTITION_INTERFACE := true
# Init files
PRODUCT_COPY_FILES += \
$(LOCAL_KERNEL):kernel \
device/google/zumapro/conf/init.zumapro.usb.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.zumapro.usb.rc \
device/google/zumapro/conf/ueventd.zumapro.rc:$(TARGET_COPY_OUT_VENDOR)/etc/ueventd.rc
PRODUCT_COPY_FILES += \
device/google/zumapro/conf/init.zumapro.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.zumapro.rc
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_COPY_FILES += \
device/google/zumapro/conf/init.debug.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.debug.rc
PRODUCT_COPY_FILES += \
device/google/zumapro/conf/init.freq.userdebug.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.freq.userdebug.rc
endif
# Recovery files
PRODUCT_COPY_FILES += \
device/google/zumapro/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.zumapro.rc \
device/google/zumapro/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.zuma.rc
# Fstab files
PRODUCT_PACKAGES += \
fstab.zuma \
fstab.zumapro \
fstab.zuma.vendor_ramdisk \
fstab.zumapro.vendor_ramdisk \
fstab.zuma-fips \
fstab.zumapro-fips \
fstab.zuma-fips.vendor_ramdisk \
fstab.zumapro-fips.vendor_ramdisk
PRODUCT_COPY_FILES += \
device/google/$(TARGET_BOARD_PLATFORM)/conf/fstab.persist:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.persist \
device/google/$(TARGET_BOARD_PLATFORM)/conf/fstab.modem:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.modem
include device/google/gs-common/insmod/insmod.mk
# Insmod config files
PRODUCT_COPY_FILES += \
$(call find-copy-subdir-files,init.insmod.*.cfg,$(TARGET_KERNEL_DIR),$(TARGET_COPY_OUT_VENDOR_DLKM)/etc)
# For creating dtbo image
PRODUCT_HOST_PACKAGES += \
mkdtimg
PRODUCT_PACKAGES += \
messaging
# Contexthub HAL
PRODUCT_PACKAGES += \
android.hardware.contexthub-service.generic
# CHRE tools
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += \
chre_power_test_client \
chre_test_client
endif
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.context_hub.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.context_hub.xml
## Enable the CHRE Daemon
CHRE_USF_DAEMON_ENABLED := true
PRODUCT_PACKAGES += \
chre \
preloaded_nanoapps.json
# Filesystem management tools
PRODUCT_PACKAGES += \
linker.vendor_ramdisk \
tune2fs.vendor_ramdisk \
resize2fs.vendor_ramdisk
# Userdata Checkpointing OTA GC
PRODUCT_PACKAGES += \
checkpoint_gc
# Vendor verbose logging default property
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.verbose_logging_enabled=true
else
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.verbose_logging_enabled=false
endif
# CP Logging properties
PRODUCT_PROPERTY_OVERRIDES += \
ro.vendor.sys.modem.logging.loc = /data/vendor/slog \
persist.vendor.sys.silentlog.tcp = "On" \
ro.vendor.cbd.modem_removable = "1" \
ro.vendor.cbd.modem_type = "s5100sit" \
persist.vendor.sys.modem.logging.br_num=5 \
persist.vendor.sys.modem.logging.enable=true
# Enable silent CP crash handling
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.ril.crash_handling_mode=1
else
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.ril.crash_handling_mode=2
endif
# Add support dual SIM mode
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.radio.multisim_switch_support=true
# RPMB TA
PRODUCT_PACKAGES += \
tlrpmb
# Touch firmware
#PRODUCT_COPY_FILES += \
device/google/zumapro/firmware/touch/s6sy761.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/s6sy761.fw
# Touch
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml
# Sensors
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.sensor.accelerometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.accelerometer.xml \
frameworks/native/data/etc/android.hardware.sensor.barometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.barometer.xml \
frameworks/native/data/etc/android.hardware.sensor.compass.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.compass.xml \
frameworks/native/data/etc/android.hardware.sensor.dynamic.head_tracker.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.dynamic.head_tracker.xml \
frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.gyroscope.xml \
frameworks/native/data/etc/android.hardware.sensor.hifi_sensors.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.hifi_sensors.xml \
frameworks/native/data/etc/android.hardware.sensor.light.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.light.xml\
frameworks/native/data/etc/android.hardware.sensor.proximity.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.proximity.xml \
frameworks/native/data/etc/android.hardware.sensor.stepcounter.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepcounter.xml \
frameworks/native/data/etc/android.hardware.sensor.stepdetector.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepdetector.xml
# Add sensor HAL AIDL product packages
PRODUCT_PACKAGES += android.hardware.sensors-service.multihal
# USB HAL
PRODUCT_PACKAGES += \
android.hardware.usb-service
PRODUCT_PACKAGES += \
android.hardware.usb.gadget-service
# MIDI feature
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.software.midi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.midi.xml
# default usb debug functions
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.usb.usbradio.config=dm
endif
# adpf 16ms update rate
PRODUCT_PRODUCT_PROPERTIES += \
vendor.powerhal.adpf.rate=16666666
PRODUCT_COPY_FILES += \
device/google/zumapro/task_profiles.json:$(TARGET_COPY_OUT_VENDOR)/etc/task_profiles.json
-include hardware/google/pixel/power-libperfmgr/aidl/device.mk
# IRQ rebalancing.
include hardware/google/pixel/rebalance_interrupts/rebalance_interrupts.mk
# PowerStats HAL
PRODUCT_PACKAGES += \
android.hardware.power.stats-service.pixel
#
# Audio HALs
#
# Audio Configurations
#USE_LEGACY_LOCAL_AUDIO_HAL := false
#USE_XML_AUDIO_POLICY_CONF := 1
# Enable AAudio MMAP/NOIRQ data path.
PRODUCT_PROPERTY_OVERRIDES += aaudio.mmap_policy=2
PRODUCT_PROPERTY_OVERRIDES += aaudio.mmap_exclusive_policy=2
PRODUCT_PROPERTY_OVERRIDES += aaudio.hw_burst_min_usec=2000
# Calliope firmware overwrite
#PRODUCT_COPY_FILES += \
device/google/zumapro/firmware/calliope_dram.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/calliope_dram.bin \
device/google/zumapro/firmware/calliope_sram.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/calliope_sram.bin \
device/google/zumapro/firmware/calliope_dram_2.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/calliope_dram_2.bin \
device/google/zumapro/firmware/calliope_sram_2.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/calliope_sram_2.bin \
device/google/zumapro/firmware/calliope2.dt:$(TARGET_COPY_OUT_VENDOR)/firmware/calliope2.dt \
# Cannot reference variables defined in BoardConfig.mk, uncomment this if
# BOARD_USE_OFFLOAD_AUDIO and BOARD_USE_OFFLOAD_EFFECT are true
## AudioEffectHAL library
#PRODUCT_PACKAGES += \
# libexynospostprocbundle
# Cannot reference variables defined in BoardConfig.mk, uncomment this if
# BOARD_USE_SOUNDTRIGGER_HAL is true
#PRODUCT_PACKAGES += \
# sound_trigger.primary.maran9820
# A-Box Service Daemon
#PRODUCT_PACKAGES += main_abox
# Libs
PRODUCT_PACKAGES += \
com.android.future.usb.accessory
PRODUCT_PACKAGES += \
android.hardware.graphics.mapper@4.0-impl \
android.hardware.graphics.allocator-V1-service
PRODUCT_PACKAGES += \
memtrack.$(TARGET_BOARD_PLATFORM) \
libion_exynos \
libion
PRODUCT_PACKAGES += \
libhwjpeg
# Video Editor
PRODUCT_PACKAGES += \
VideoEditorGoogle
# WideVine modules
include device/google/zumapro/widevine/device.mk
PRODUCT_PACKAGES += \
liboemcrypto \
RIPCURRENTPRO_PRODUCT := %ripcurrentpro
ifneq (,$(filter $(RIPCURRENTPRO_PRODUCT), $(TARGET_PRODUCT)))
LOCAL_TARGET_PRODUCT := ripcurrentpro
else
# WAR: continue defaulting to slider build on zumapro
LOCAL_TARGET_PRODUCT := slider
endif
include device/google/gs-common/camera/lyric.mk
# TODO(b/272725898): Needs to check with owner later
$(warning lyric set to zuma on zumapro target)
$(call soong_config_set,lyric,soc,zuma)
$(call soong_config_set,lyric,kernel_version,v515)
# lyric::tuning_product is set in device-specific makefiles,
# such as device/google/${DEVICE}/device-${DEVICE}.mk
# WiFi
PRODUCT_PACKAGES += \
android.hardware.wifi-service \
wificond \
libwpa_client
# Connectivity
PRODUCT_PACKAGES += \
ConnectivityOverlay
PRODUCT_PACKAGES_DEBUG += \
f2fs_io \
check_f2fs \
f2fs.fibmap \
dump.f2fs
# Storage health HAL
PRODUCT_PACKAGES += \
android.hardware.health.storage-service.default
# Battery Mitigation
include device/google/gs-common/battery_mitigation/bcl.mk
# storage pixelstats
-include hardware/google/pixel/pixelstats/device.mk
# Enable project quotas and casefolding for emulated storage without sdcardfs
$(call inherit-product, $(SRC_TARGET_DIR)/product/emulated_storage.mk)
$(call inherit-product, $(SRC_TARGET_DIR)/product/virtual_ab_ota/android_t_baseline.mk)
PRODUCT_VIRTUAL_AB_COMPRESSION_METHOD := gz
# Enforce generic ramdisk allow list
$(call inherit-product, $(SRC_TARGET_DIR)/product/generic_ramdisk.mk)
# Titan-M
ifeq (,$(filter true, $(BOARD_WITHOUT_DTLS)))
include device/google/gs-common/dauntless/gsc.mk
endif
PRODUCT_PACKAGES_DEBUG += \
WvInstallKeybox
# Copy Camera HFD Setfiles
#PRODUCT_COPY_FILES += \
device/google/zumapro/firmware/camera/libhfd/default_configuration.hfd.cfg.json:$(TARGET_COPY_OUT_VENDOR)/firmware/default_configuration.hfd.cfg.json \
device/google/zumapro/firmware/camera/libhfd/pp_cfg.json:$(TARGET_COPY_OUT_VENDOR)/firmware/pp_cfg.json \
device/google/zumapro/firmware/camera/libhfd/tracker_cfg.json:$(TARGET_COPY_OUT_VENDOR)/firmware/tracker_cfg.json \
device/google/zumapro/firmware/camera/libhfd/WithLightFixNoBN.SDNNmodel:$(TARGET_COPY_OUT_VENDOR)/firmware/WithLightFixNoBN.SDNNmodel
# WiFi
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.wifi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.xml \
frameworks/native/data/etc/android.hardware.wifi.direct.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.direct.xml \
frameworks/native/data/etc/android.hardware.wifi.aware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.aware.xml \
frameworks/native/data/etc/android.hardware.wifi.passpoint.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.passpoint.xml \
frameworks/native/data/etc/android.hardware.wifi.rtt.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.rtt.xml
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.usb.host.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.host.xml \
frameworks/native/data/etc/android.hardware.usb.accessory.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.accessory.xml
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.flash-autofocus.xml \
frameworks/native/data/etc/android.hardware.camera.front.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.front.xml \
frameworks/native/data/etc/android.hardware.camera.concurrent.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.concurrent.xml \
frameworks/native/data/etc/android.hardware.camera.full.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.full.xml\
frameworks/native/data/etc/android.hardware.camera.raw.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.raw.xml\
#PRODUCT_COPY_FILES += \
frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml \
frameworks/native/data/etc/android.hardware.wifi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.xml \
frameworks/native/data/etc/android.hardware.wifi.direct.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.direct.xml \
frameworks/native/data/etc/android.hardware.wifi.passpoint.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.passpoint.xml \
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.audio.low_latency.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.low_latency.xml \
frameworks/native/data/etc/android.hardware.audio.pro.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.pro.xml \
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.software.ipsec_tunnels.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.ipsec_tunnels.xml \
PRODUCT_PROPERTY_OVERRIDES += \
debug.slsi_platform=1 \
debug.hwc.winupdate=1
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += displaycolor_service
endif
PRODUCT_PROPERTY_OVERRIDES += \
debug.sf.disable_backpressure=0 \
debug.sf.enable_gl_backpressure=1 \
debug.sf.enable_sdr_dimming=1
# Camera
PRODUCT_PROPERTY_OVERRIDES += \
vendor.camera.multicam.enable_p23_multicam=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.use_phase_offsets_as_durations=1
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.late.sf.duration=10500000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.late.app.duration=16600000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.early.sf.duration=16600000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.early.app.duration=16600000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.earlyGl.sf.duration=16600000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.earlyGl.app.duration=16600000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.frame_rate_multiple_threshold=120
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.enable_layer_caching=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.set_idle_timer_ms?=80
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.set_touch_timer_ms=200
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.set_display_power_timer_ms=1000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.use_content_detection_for_refresh_rate=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.max_frame_buffer_acquired_buffers=3
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.supports_background_blur=1
PRODUCT_SYSTEM_PROPERTIES += ro.launcher.blur.appLaunch=0
# Must align with HAL types Dataspace
# The data space of wide color gamut composition preference is Dataspace::DISPLAY_P3
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.wcg_composition_dataspace=143261696
# Display
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.has_wide_color_display=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.has_HDR_display=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.use_color_management=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.protected_contents=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.display_update_imminent_timeout_ms=50
# force to blend in P3 mode
PRODUCT_PROPERTY_OVERRIDES += \
persist.sys.sf.native_mode=2 \
persist.sys.sf.color_mode=9
PRODUCT_COPY_FILES += \
device/google/zumapro/display/display_colordata_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_cal0.pb
# limit DPP downscale ratio
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.hwc.dpp.downscale=2
# Cannot reference variables defined in BoardConfig.mk, uncomment this if
# BOARD_USES_EXYNOS_DSS_FEATURE is true
## set the dss enable status setup
#PRODUCT_PROPERTY_OVERRIDES += \
# ro.exynos.dss=1
# Cannot reference variables defined in BoardConfig.mk, uncomment this if
# BOARD_USES_EXYNOS_AFBC_FEATURE is true
# set the dss enable status setup
PRODUCT_PROPERTY_OVERRIDES += \
ro.vendor.ddk.set.afbc=1
PRODUCT_CHARACTERISTICS := nosdcard
# WIFI COEX
PRODUCT_COPY_FILES += \
device/google/zumapro/wifi/coex_table.xml:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/coex_table.xml
PRODUCT_PACKAGES += hostapd
PRODUCT_PACKAGES += wpa_supplicant
PRODUCT_PACKAGES += wpa_supplicant.conf
WIFI_PRIV_CMD_UPDATE_MBO_CELL_STATUS := enabled
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += wpa_cli
PRODUCT_PACKAGES += hostapd_cli
endif
####################################
## VIDEO
####################################
# Video
PRODUCT_SOONG_NAMESPACES += vendor/google/media/bigwave
$(call soong_config_set,bigw,soc,$(TARGET_BOARD_PLATFORM))
PRODUCT_PACKAGES += \
google.hardware.media.c2@2.0-service \
libgc2_bw_store \
libgc2_bw_base \
libgc2_bw_av1_dec \
libgc2_bw_av1_enc \
libbw_av1dec \
libbw_av1enc \
libgc2_bw_cwl \
libgc2_bw_log \
libgc2_bw_utils
# 1. Codec 2.0
# for settings used by different C2 hal
include device/google/gs-common/mediacodec/common/mediacodec_common.mk
# for Exynos C2 Hal
include device/google/gs-common/mediacodec/samsung/mediacodec_samsung.mk
PRODUCT_COPY_FILES += \
device/google/zumapro/media_codecs_performance_c2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_performance_c2.xml \
PRODUCT_PROPERTY_OVERRIDES += \
debug.stagefright.c2-poolmask=458752 \
debug.c2.use_dmabufheaps=1 \
media.c2.dmabuf.padding=512 \
debug.stagefright.ccodec_delayed_params=1 \
ro.vendor.gpu.dataspace=1
# Create input surface on the framework side
PRODUCT_PROPERTY_OVERRIDES += \
debug.stagefright.c2inputsurface=-1 \
# 2. OpenMAX IL
PRODUCT_COPY_FILES += \
device/google/zumapro/media_codecs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs.xml \
device/google/zumapro/media_codecs_performance.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_performance.xml
####################################
# Telephony
#PRODUCT_COPY_FILES += \
frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_telephony.xml
# CBD (CP booting deamon)
CBD_USE_V2 := true
CBD_PROTOCOL_SIT := true
# setup dalvik vm configs.
$(call inherit-product, frameworks/native/build/phone-xhdpi-6144-dalvik-heap.mk)
PRODUCT_TAGS += dalvik.gc.type-precise
# Exynos OpenVX framework
PRODUCT_PACKAGES += \
libexynosvision
ifeq ($(TARGET_USES_CL_KERNEL),true)
PRODUCT_PACKAGES += \
libopenvx-opencl
endif
# Trusty (KM, GK, Storage)
$(call inherit-product, system/core/trusty/trusty-storage.mk)
$(call inherit-product, system/core/trusty/trusty-base.mk)
# Trusty unit test tool
PRODUCT_PACKAGES_DEBUG += \
trusty-ut-ctrl \
tipc-test \
trusty_stats_test \
#include device/google/gs101/confirmationui/confirmationui.mk
# Trusty Metrics Daemon
PRODUCT_SOONG_NAMESPACES += \
vendor/google/trusty/common
PRODUCT_PACKAGES += \
trusty_metricsd
# TODO(b/272725898): Needs to check with owner later
$(warning displaycolor_platform set to zuma on zumapro target)
$(call soong_config_set,google_displaycolor,displaycolor_platform,zuma)
PRODUCT_PACKAGES += \
android.hardware.composer.hwc3-service.pixel \
libdisplaycolor
# Storage: for factory reset protection feature
PRODUCT_PROPERTY_OVERRIDES += \
ro.frp.pst=/dev/block/by-name/frp
# System props to enable Bluetooth Quality Report (BQR) feature
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.bqr.event_mask?=262174 \
persist.bluetooth.bqr.min_interval_ms=500
else
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.bqr.event_mask?=30 \
persist.bluetooth.bqr.min_interval_ms=500
endif
#VNDK
PRODUCT_PACKAGES += \
vndk-libs
PRODUCT_ENFORCE_RRO_TARGETS := \
framework-res
# Dynamic Partitions
PRODUCT_USE_DYNAMIC_PARTITIONS := true
# Use FUSE passthrough
PRODUCT_PRODUCT_PROPERTIES += \
persist.sys.fuse.passthrough.enable=true
# Use /product/etc/fstab.postinstall to mount system_other
PRODUCT_PRODUCT_PROPERTIES += \
ro.postinstall.fstab.prefix=/product
PRODUCT_COPY_FILES += \
device/google/zumapro/conf/fstab.postinstall:$(TARGET_COPY_OUT_PRODUCT)/etc/fstab.postinstall
# fastbootd
PRODUCT_PACKAGES += \
android.hardware.fastboot@1.1-impl.pixel \
fastbootd
#google iwlan
PRODUCT_PACKAGES += \
Iwlan
#Iwlan test app for userdebug/eng builds
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += \
IwlanTestApp
endif
PRODUCT_PACKAGES += \
whitelist \
libstagefright_hdcp \
libskia_opt
#PRODUCT_PACKAGES += \
mfc_fw.bin \
calliope_sram.bin \
calliope_dram.bin \
calliope_iva.bin \
vts.bin
# This will be called only if IMSService is building with source code for dev branches.
$(call inherit-product-if-exists, vendor/samsung_slsi/telephony/$(BOARD_USES_SHARED_VENDOR_TELEPHONY)/shannon-ims/device-vendor.mk)
PRODUCT_PACKAGES += ShannonIms
#RCS Test Messaging App
PRODUCT_PACKAGES_DEBUG += \
TestRcsApp
PRODUCT_PACKAGES += ShannonRcs
ifeq (,$(filter aosp_% factory_%,$(TARGET_PRODUCT)))
#ImsMediaAoc library
FEATURE_TYPE := oem_audio
SOONG_CONFIG_NAMESPACES += audio_lib
SOONG_CONFIG_audio_lib += \
audio_type
SOONG_CONFIG_audio_lib_audio_type := $(FEATURE_TYPE)
endif
# ImsMedia
PRODUCT_PACKAGES += \
ImsMediaService \
libimsmedia
# Boot Control HAL
PRODUCT_PACKAGES += \
android.hardware.boot@1.2-impl-zumapro \
android.hardware.boot@1.2-service-zumapro
# Exynos RIL and telephony
# Multi SIM(DSDS)
SIM_COUNT := 2
SUPPORT_MULTI_SIM := true
# Support NR
SUPPORT_NR := true
# Support 5G on both stacks
SUPPORT_NR_DS := true
# Using IRadio 2.1
USE_RADIO_HAL_2_1 := true
#$(call inherit-product, vendor/google_devices/telephony/common/device-vendor.mk)
#$(call inherit-product, vendor/google_devices/zumapro/proprietary/device-vendor.mk)
ifneq ($(BOARD_WITHOUT_RADIO),true)
$(call inherit-product-if-exists, vendor/samsung_slsi/telephony/$(BOARD_USES_SHARED_VENDOR_TELEPHONY)/common/device-vendor.mk)
endif
$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit_only.mk)
#$(call inherit-product, hardware/google_devices/exynos5/exynos5.mk)
#$(call inherit-product-if-exists, hardware/google_devices/zumapro/zumapro.mk)
#$(call inherit-product-if-exists, vendor/google_devices/common/exynos-vendor.mk)
#$(call inherit-product-if-exists, hardware/broadcom/wlan/bcmdhd/firmware/bcm4375/device-bcm.mk)
include device/google/gs-common/sensors/sensors.mk
PRODUCT_COPY_FILES += \
device/google/zumapro/default-permissions.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/default-permissions/default-permissions.xml \
device/google/zumapro/component-overrides.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sysconfig/component-overrides.xml \
frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml \
ifneq ($(BOARD_WITHOUT_RADIO),true)
# modem_svc_sit daemon
PRODUCT_PACKAGES += modem_svc_sit
# modem_ml_svc_sit daemon
PRODUCT_PACKAGES += modem_ml_svc_sit
# modem ML models configs
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_COPY_FILES += \
device/google/zumapro/modem_ml/modem_ml_models_userdebug.conf:$(TARGET_COPY_OUT_VENDOR)/etc/modem_ml_models.conf
else
PRODUCT_COPY_FILES += \
device/google/zumapro/modem_ml/modem_ml_models_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/modem_ml_models.conf
endif
# modem logging binary/configs
PRODUCT_PACKAGES += modem_logging_control
# modem logging configs
PRODUCT_COPY_FILES += \
device/google/zumapro/radio/config/logging.conf:$(TARGET_COPY_OUT_VENDOR)/etc/modem/logging.conf \
device/google/zumapro/radio/config/default.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/modem/default.cfg \
device/google/zumapro/radio/config/default.nprf:$(TARGET_COPY_OUT_VENDOR)/etc/modem/default.nprf \
device/google/zumapro/radio/config/default_metrics.xml:$(TARGET_COPY_OUT_VENDOR)/etc/modem/default_metrics.xml
endif
# ARM NN files
ARMNN_COMPUTE_CL_ENABLE := 1
# Vibrator Diag
PRODUCT_PACKAGES_DEBUG += \
diag-vibrator \
diag-vibrator-cs40l25a \
diag-vibrator-drv2624 \
$(NULL)
PRODUCT_PACKAGES += \
android.hardware.health-service.zumapro \
android.hardware.health-service.zumapro_recovery \
# Audio
# Audio HAL Server & Default Implementations
include device/google/gs-common/audio/hidl_zuma.mk
## AoC soong
PRODUCT_SOONG_NAMESPACES += \
vendor/google/whitechapel/aoc
$(call soong_config_set,aoc,target_soc,$(TARGET_BOARD_PLATFORM))
$(call soong_config_set,aoc,target_product,$(TARGET_PRODUCT))
#
## Audio properties
PRODUCT_PROPERTY_OVERRIDES += \
ro.config.vc_call_vol_steps=7 \
ro.config.media_vol_steps=25 \
ro.audio.monitorRotation = true \
ro.audio.offload_wakelock=false
# vndservicemanager and vndservice no longer included in API 30+, however needed by vendor code.
# See b/148807371 for reference
PRODUCT_PACKAGES += vndservicemanager
PRODUCT_PACKAGES += vndservice
## TinyTools, debug tool and cs35l41 speaker calibration tool for Audio
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += \
tinyplay \
tinycap \
tinymix \
tinypcminfo \
tinyhostless \
cplay \
aoc_hal \
aoc_tuning_inft \
mahal_test \
ma_aoc_tuning_test \
crus_sp_cal
endif
PRODUCT_PACKAGES += \
google.hardware.media.c2@1.0-service \
libgc2_store \
libgc2_base \
libgc2_av1_dec \
libbo_av1 \
libgc2_cwl \
libgc2_utils
## Start packet router
include device/google/gs101/telephony/pktrouter.mk
# Thermal HAL
include hardware/google/pixel/thermal/device.mk
PRODUCT_PROPERTY_OVERRIDES += persist.vendor.enable.thermal.genl=true
# EdgeTPU
include device/google/gs-common/edgetpu/edgetpu.mk
# Config variables for TPU chip on device.
$(call soong_config_set,edgetpu_config,chip,rio)
# TPU firmware
PRODUCT_PACKAGES += edgetpu-rio.fw
# Connectivity Thermal Power Manager
PRODUCT_PACKAGES += \
ConnectivityThermalPowerManager
# A/B support
PRODUCT_PACKAGES += \
otapreopt_script \
cppreopts.sh \
update_engine \
update_engine_sideload \
update_verifier
# pKVM
$(call inherit-product, packages/modules/Virtualization/apex/product_packages.mk)
PRODUCT_BUILD_PVMFW_IMAGE := true
# Enable to build standalone vendor_kernel_boot image.
PRODUCT_BUILD_VENDOR_KERNEL_BOOT_IMAGE := true
# Enable watchdog timeout loop breaker.
PRODUCT_PROPERTY_OVERRIDES += \
framework_watchdog.fatal_window.second=600 \
framework_watchdog.fatal_count=3
# Enable zygote critical window.
PRODUCT_PROPERTY_OVERRIDES += \
zygote.critical_window.minute=10
# Suspend properties
PRODUCT_PROPERTY_OVERRIDES += \
suspend.short_suspend_threshold_millis=5000
# Enable Incremental on the device
PRODUCT_PROPERTY_OVERRIDES += \
ro.incremental.enable=true
# Project
include hardware/google/pixel/common/pixel-common-device.mk
# Pixel Logger
ifneq ($(BOARD_WITHOUT_RADIO),true)
include hardware/google/pixel/PixelLogger/PixelLogger.mk
else
BOARD_SEPOLICY_DIRS += hardware/google/pixel-sepolicy/logger_app
endif
# sscoredump
include hardware/google/pixel/sscoredump/device.mk
# RadioExt Version
USES_RADIOEXT_V1_6 = true
# Wifi ext
include hardware/google/pixel/wifi_ext/device.mk
# Battery Stats Viewer
PRODUCT_PACKAGES_DEBUG += BatteryStatsViewer
# Install product specific framework compatibility matrix
# (TODO: b/169535506) This includes the FCM for system_ext and product partition.
# It must be split into the FCM of each partition.
DEVICE_PRODUCT_COMPATIBILITY_MATRIX_FILE += device/google/zumapro/device_framework_matrix_product.xml
# Keymint configuration
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.software.device_id_attestation.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.device_id_attestation.xml \
frameworks/native/data/etc/android.hardware.device_unique_attestation.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.device_unique_attestation.xml
# Call deleteAllKeys if vold detects a factory reset
PRODUCT_VENDOR_PROPERTIES += ro.crypto.metadata_init_delete_all_keys.enabled?=true
# Use HCTR2 for filenames encryption on adoptable storage.
PRODUCT_PROPERTY_OVERRIDES += \
ro.crypto.volume.options=aes-256-xts:aes-256-hctr2
# Hardware Info Collection
include hardware/google/pixel/HardwareInfo/HardwareInfo.mk
# UFS: the script is used to select the corresponding firmware to run FFU.
PRODUCT_PACKAGES_DEBUG += ufs_firmware_update.sh
# RIL extension service
ifeq (,$(filter aosp_% factory_%,$(TARGET_PRODUCT)))
include device/google/gs-common/pixel_ril/ril.mk
endif
# Touch service
include hardware/google/pixel/input/twoshay.mk
Reference in a new issue View git blame Copy permalink