Merge a6527128fe ("net/sched: act_ipt: add sanity checks on table name and hook locations") into android13-5.15-lts

Steps on the way to 5.15.121

Resolves merge conflicts in:
	sound/core/jack.c

Change-Id: I814d63b0eaf28dba8918dd5385e12dfbcdb11dcd
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

arch/s390/kvm/diag.c

@@ -166,6 +166,7 @@ static int diag9c_forwarding_overrun(void)
 static int __diag_time_slice_end_directed(struct kvm_vcpu *vcpu)
 {
 	struct kvm_vcpu *tcpu;
+	int tcpu_cpu;
 	int tid;
 
 	tid = vcpu->run->s.regs.gprs[(vcpu->arch.sie_block->ipa & 0xf0) >> 4];
@@ -181,14 +182,15 @@ static int __diag_time_slice_end_directed(struct kvm_vcpu *vcpu)
 		goto no_yield;
 
 	/* target guest VCPU already running */
-	if (READ_ONCE(tcpu->cpu) >= 0) {
+	tcpu_cpu = READ_ONCE(tcpu->cpu);
+	if (tcpu_cpu >= 0) {
 		if (!diag9c_forwarding_hz || diag9c_forwarding_overrun())
 			goto no_yield;
 
 		/* target host CPU already running */
-		if (!vcpu_is_preempted(tcpu->cpu))
+		if (!vcpu_is_preempted(tcpu_cpu))
 			goto no_yield;
-		smp_yield_cpu(tcpu->cpu);
+		smp_yield_cpu(tcpu_cpu);
 		VCPU_EVENT(vcpu, 5,
 			   "diag time slice end directed to %d: yield forwarded",
 			   tid);

arch/s390/kvm/kvm-s390.c

@@ -2030,6 +2030,10 @@ static unsigned long kvm_s390_next_dirty_cmma(struct kvm_memslots *slots,
 		ms = slots->memslots + slotidx;
 		ofs = 0;
 	}
+
+	if (cur_gfn < ms->base_gfn)
+		ofs = 0;
+
 	ofs = find_next_bit(kvm_second_dirty_bitmap(ms), ms->npages, ofs);
 	while ((slotidx > 0) && (ofs >= ms->npages)) {
 		slotidx--;

arch/s390/kvm/vsie.c

@@ -169,7 +169,8 @@ static int setup_apcb00(struct kvm_vcpu *vcpu, unsigned long *apcb_s,
 			    sizeof(struct kvm_s390_apcb0)))
 		return -EFAULT;
 
-	bitmap_and(apcb_s, apcb_s, apcb_h, sizeof(struct kvm_s390_apcb0));
+	bitmap_and(apcb_s, apcb_s, apcb_h,
+		   BITS_PER_BYTE * sizeof(struct kvm_s390_apcb0));
 
 	return 0;
 }
@@ -191,7 +192,8 @@ static int setup_apcb11(struct kvm_vcpu *vcpu, unsigned long *apcb_s,
 			    sizeof(struct kvm_s390_apcb1)))
 		return -EFAULT;
 
-	bitmap_and(apcb_s, apcb_s, apcb_h, sizeof(struct kvm_s390_apcb1));
+	bitmap_and(apcb_s, apcb_s, apcb_h,
+		   BITS_PER_BYTE * sizeof(struct kvm_s390_apcb1));
 
 	return 0;
 }

arch/sh/kernel/cpu/sh2/probe.c

@@ -21,7 +21,7 @@ static int __init scan_cache(unsigned long node, const char *uname,
 	if (!of_flat_dt_is_compatible(node, "jcore,cache"))
 		return 0;
 
-	j2_ccr_base = (u32 __iomem *)of_flat_dt_translate_address(node);
+	j2_ccr_base = ioremap(of_flat_dt_translate_address(node), 4);
 
 	return 1;
 }

block/disk-events.c

@@ -307,6 +307,7 @@ bool disk_force_media_change(struct gendisk *disk, unsigned int events)
 	if (!(events & DISK_EVENT_MEDIA_CHANGE))
 		return false;
 
+	inc_diskseq(disk);
 	if (__invalidate_device(disk->part0, true))
 		pr_warn("VFS: busy inodes on changed media %s\n",
 			disk->disk_name);

block/partitions/amiga.c

@@ -11,10 +11,18 @@
 #define pr_fmt(fmt) fmt
 
 #include <linux/types.h>
+#include <linux/mm_types.h>
+#include <linux/overflow.h>
 #include <linux/affs_hardblocks.h>
 
 #include "check.h"
 
+/* magic offsets in partition DosEnvVec */
+#define NR_HD	3
+#define NR_SECT	5
+#define LO_CYL	9
+#define HI_CYL	10
+
 static __inline__ u32
 checksum_block(__be32 *m, int size)
 {
@@ -31,8 +39,12 @@ int amiga_partition(struct parsed_partitions *state)
 	unsigned char *data;
 	struct RigidDiskBlock *rdb;
 	struct PartitionBlock *pb;
-	int start_sect, nr_sects, blk, part, res = 0;
-	int blksize = 1;	/* Multiplier for disk block size */
+	u64 start_sect, nr_sects;
+	sector_t blk, end_sect;
+	u32 cylblk;		/* rdb_CylBlocks = nr_heads*sect_per_track */
+	u32 nr_hd, nr_sect, lo_cyl, hi_cyl;
+	int part, res = 0;
+	unsigned int blksize = 1;	/* Multiplier for disk block size */
 	int slot = 1;
 
 	for (blk = 0; ; blk++, put_dev_sector(sect)) {
@@ -40,7 +52,7 @@ int amiga_partition(struct parsed_partitions *state)
 			goto rdb_done;
 		data = read_part_sector(state, blk, &sect);
 		if (!data) {
-			pr_err("Dev %s: unable to read RDB block %d\n",
+			pr_err("Dev %s: unable to read RDB block %llu\n",
 			       state->disk->disk_name, blk);
 			res = -1;
 			goto rdb_done;
@@ -57,12 +69,12 @@ int amiga_partition(struct parsed_partitions *state)
 		*(__be32 *)(data+0xdc) = 0;
 		if (checksum_block((__be32 *)data,
 				be32_to_cpu(rdb->rdb_SummedLongs) & 0x7F)==0) {
-			pr_err("Trashed word at 0xd0 in block %d ignored in checksum calculation\n",
+			pr_err("Trashed word at 0xd0 in block %llu ignored in checksum calculation\n",
 			       blk);
 			break;
 		}
 
-		pr_err("Dev %s: RDB in block %d has bad checksum\n",
+		pr_err("Dev %s: RDB in block %llu has bad checksum\n",
 		       state->disk->disk_name, blk);
 	}
 
@@ -79,10 +91,15 @@ int amiga_partition(struct parsed_partitions *state)
 	blk = be32_to_cpu(rdb->rdb_PartitionList);
 	put_dev_sector(sect);
 	for (part = 1; blk>0 && part<=16; part++, put_dev_sector(sect)) {
-		blk *= blksize;	/* Read in terms partition table understands */
+		/* Read in terms partition table understands */
+		if (check_mul_overflow(blk, (sector_t) blksize, &blk)) {
+			pr_err("Dev %s: overflow calculating partition block %llu! Skipping partitions %u and beyond\n",
+				state->disk->disk_name, blk, part);
+			break;
+		}
 		data = read_part_sector(state, blk, &sect);
 		if (!data) {
-			pr_err("Dev %s: unable to read partition block %d\n",
+			pr_err("Dev %s: unable to read partition block %llu\n",
 			       state->disk->disk_name, blk);
 			res = -1;
 			goto rdb_done;
@@ -94,19 +111,70 @@ int amiga_partition(struct parsed_partitions *state)
 		if (checksum_block((__be32 *)pb, be32_to_cpu(pb->pb_SummedLongs) & 0x7F) != 0 )
 			continue;
 
-		/* Tell Kernel about it */
+		/* RDB gives us more than enough rope to hang ourselves with,
+		 * many times over (2^128 bytes if all fields max out).
+		 * Some careful checks are in order, so check for potential
+		 * overflows.
+		 * We are multiplying four 32 bit numbers to one sector_t!
+		 */
+
+		nr_hd   = be32_to_cpu(pb->pb_Environment[NR_HD]);
+		nr_sect = be32_to_cpu(pb->pb_Environment[NR_SECT]);
+
+		/* CylBlocks is total number of blocks per cylinder */
+		if (check_mul_overflow(nr_hd, nr_sect, &cylblk)) {
+			pr_err("Dev %s: heads*sects %u overflows u32, skipping partition!\n",
+				state->disk->disk_name, cylblk);
+			continue;
+		}
+
+		/* check for consistency with RDB defined CylBlocks */
+		if (cylblk > be32_to_cpu(rdb->rdb_CylBlocks)) {
+			pr_warn("Dev %s: cylblk %u > rdb_CylBlocks %u!\n",
+				state->disk->disk_name, cylblk,
+				be32_to_cpu(rdb->rdb_CylBlocks));
+		}
+
+		/* RDB allows for variable logical block size -
+		 * normalize to 512 byte blocks and check result.
+		 */
+
+		if (check_mul_overflow(cylblk, blksize, &cylblk)) {
+			pr_err("Dev %s: partition %u bytes per cyl. overflows u32, skipping partition!\n",
+				state->disk->disk_name, part);
+			continue;
+		}
+
+		/* Calculate partition start and end. Limit of 32 bit on cylblk
+		 * guarantees no overflow occurs if LBD support is enabled.
+		 */
+
+		lo_cyl = be32_to_cpu(pb->pb_Environment[LO_CYL]);
+		start_sect = ((u64) lo_cyl * cylblk);
+
+		hi_cyl = be32_to_cpu(pb->pb_Environment[HI_CYL]);
+		nr_sects = (((u64) hi_cyl - lo_cyl + 1) * cylblk);
 
-		nr_sects = (be32_to_cpu(pb->pb_Environment[10]) + 1 -
-			    be32_to_cpu(pb->pb_Environment[9])) *
-			   be32_to_cpu(pb->pb_Environment[3]) *
-			   be32_to_cpu(pb->pb_Environment[5]) *
-			   blksize;
 		if (!nr_sects)
 			continue;
-		start_sect = be32_to_cpu(pb->pb_Environment[9]) *
-			     be32_to_cpu(pb->pb_Environment[3]) *
-			     be32_to_cpu(pb->pb_Environment[5]) *
-			     blksize;
+
+		/* Warn user if partition end overflows u32 (AmigaDOS limit) */
+
+		if ((start_sect + nr_sects) > UINT_MAX) {
+			pr_warn("Dev %s: partition %u (%llu-%llu) needs 64 bit device support!\n",
+				state->disk->disk_name, part,
+				start_sect, start_sect + nr_sects);
+		}
+
+		if (check_add_overflow(start_sect, nr_sects, &end_sect)) {
+			pr_err("Dev %s: partition %u (%llu-%llu) needs LBD device support, skipping partition!\n",
+				state->disk->disk_name, part,
+				start_sect, end_sect);
+			continue;
+		}
+
+		/* Tell Kernel about it */
+
 		put_partition(state,slot++,start_sect,nr_sects);
 		{
 			/* Be even more informative to aid mounting */

drivers/clk/qcom/camcc-sc7180.c

@@ -1493,12 +1493,21 @@ static struct clk_branch cam_cc_sys_tmr_clk = {
 	},
 };
 
+static struct gdsc titan_top_gdsc = {
+	.gdscr = 0xb134,
+	.pd = {
+		.name = "titan_top_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
 static struct gdsc bps_gdsc = {
 	.gdscr = 0x6004,
 	.pd = {
 		.name = "bps_gdsc",
 	},
 	.pwrsts = PWRSTS_OFF_ON,
+	.parent = &titan_top_gdsc.pd,
 	.flags = HW_CTRL,
 };
 
@@ -1508,6 +1517,7 @@ static struct gdsc ife_0_gdsc = {
 		.name = "ife_0_gdsc",
 	},
 	.pwrsts = PWRSTS_OFF_ON,
+	.parent = &titan_top_gdsc.pd,
 };
 
 static struct gdsc ife_1_gdsc = {
@@ -1516,6 +1526,7 @@ static struct gdsc ife_1_gdsc = {
 		.name = "ife_1_gdsc",
 	},
 	.pwrsts = PWRSTS_OFF_ON,
+	.parent = &titan_top_gdsc.pd,
 };
 
 static struct gdsc ipe_0_gdsc = {
@@ -1525,15 +1536,9 @@ static struct gdsc ipe_0_gdsc = {
 	},
 	.pwrsts = PWRSTS_OFF_ON,
 	.flags = HW_CTRL,
+	.parent = &titan_top_gdsc.pd,
 };
 
-static struct gdsc titan_top_gdsc = {
-	.gdscr = 0xb134,
-	.pd = {
-		.name = "titan_top_gdsc",
-	},
-	.pwrsts = PWRSTS_OFF_ON,
-};
 
 static struct clk_hw *cam_cc_sc7180_hws[] = {
 	[CAM_CC_PLL2_OUT_EARLY] = &cam_cc_pll2_out_early.hw,

drivers/clk/qcom/gcc-ipq6018.c

@@ -1654,7 +1654,7 @@ static struct clk_rcg2 sdcc1_apps_clk_src = {
 		.name = "sdcc1_apps_clk_src",
 		.parent_data = gcc_xo_gpll0_gpll2_gpll0_out_main_div2,
 		.num_parents = 4,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 
@@ -4517,24 +4517,24 @@ static const struct qcom_reset_map gcc_ipq6018_resets[] = {
 	[GCC_PCIE0_AHB_ARES] = { 0x75040, 5 },
 	[GCC_PCIE0_AXI_MASTER_STICKY_ARES] = { 0x75040, 6 },
 	[GCC_PCIE0_AXI_SLAVE_STICKY_ARES] = { 0x75040, 7 },
-	[GCC_PPE_FULL_RESET] = { 0x68014, 0 },
-	[GCC_UNIPHY0_SOFT_RESET] = { 0x56004, 0 },
+	[GCC_PPE_FULL_RESET] = { .reg = 0x68014, .bitmask = 0xf0000 },
+	[GCC_UNIPHY0_SOFT_RESET] = { .reg = 0x56004, .bitmask = 0x3ff2 },
 	[GCC_UNIPHY0_XPCS_RESET] = { 0x56004, 2 },
-	[GCC_UNIPHY1_SOFT_RESET] = { 0x56104, 0 },
+	[GCC_UNIPHY1_SOFT_RESET] = { .reg = 0x56104, .bitmask = 0x32 },
 	[GCC_UNIPHY1_XPCS_RESET] = { 0x56104, 2 },
-	[GCC_EDMA_HW_RESET] = { 0x68014, 0 },
-	[GCC_NSSPORT1_RESET] = { 0x68014, 0 },
-	[GCC_NSSPORT2_RESET] = { 0x68014, 0 },
-	[GCC_NSSPORT3_RESET] = { 0x68014, 0 },
-	[GCC_NSSPORT4_RESET] = { 0x68014, 0 },
-	[GCC_NSSPORT5_RESET] = { 0x68014, 0 },
-	[GCC_UNIPHY0_PORT1_ARES] = { 0x56004, 0 },
-	[GCC_UNIPHY0_PORT2_ARES] = { 0x56004, 0 },
-	[GCC_UNIPHY0_PORT3_ARES] = { 0x56004, 0 },
-	[GCC_UNIPHY0_PORT4_ARES] = { 0x56004, 0 },
-	[GCC_UNIPHY0_PORT5_ARES] = { 0x56004, 0 },
-	[GCC_UNIPHY0_PORT_4_5_RESET] = { 0x56004, 0 },
-	[GCC_UNIPHY0_PORT_4_RESET] = { 0x56004, 0 },
+	[GCC_EDMA_HW_RESET] = { .reg = 0x68014, .bitmask = 0x300000 },
+	[GCC_NSSPORT1_RESET] = { .reg = 0x68014, .bitmask = 0x1000003 },
+	[GCC_NSSPORT2_RESET] = { .reg = 0x68014, .bitmask = 0x200000c },
+	[GCC_NSSPORT3_RESET] = { .reg = 0x68014, .bitmask = 0x4000030 },
+	[GCC_NSSPORT4_RESET] = { .reg = 0x68014, .bitmask = 0x8000300 },
+	[GCC_NSSPORT5_RESET] = { .reg = 0x68014, .bitmask = 0x10000c00 },
+	[GCC_UNIPHY0_PORT1_ARES] = { .reg = 0x56004, .bitmask = 0x30 },
+	[GCC_UNIPHY0_PORT2_ARES] = { .reg = 0x56004, .bitmask = 0xc0 },
+	[GCC_UNIPHY0_PORT3_ARES] = { .reg = 0x56004, .bitmask = 0x300 },
+	[GCC_UNIPHY0_PORT4_ARES] = { .reg = 0x56004, .bitmask = 0xc00 },
+	[GCC_UNIPHY0_PORT5_ARES] = { .reg = 0x56004, .bitmask = 0x3000 },
+	[GCC_UNIPHY0_PORT_4_5_RESET] = { .reg = 0x56004, .bitmask = 0x3c02 },
+	[GCC_UNIPHY0_PORT_4_RESET] = { .reg = 0x56004, .bitmask = 0xc02 },
 	[GCC_LPASS_BCR] = {0x1F000, 0},
 	[GCC_UBI32_TBU_BCR] = {0x65000, 0},
 	[GCC_LPASS_TBU_BCR] = {0x6C000, 0},

drivers/clk/qcom/reset.c

@@ -13,8 +13,10 @@
 
 static int qcom_reset(struct reset_controller_dev *rcdev, unsigned long id)
 {
+	struct qcom_reset_controller *rst = to_qcom_reset_controller(rcdev);
+
 	rcdev->ops->assert(rcdev, id);
-	udelay(1);
+	udelay(rst->reset_map[id].udelay ?: 1); /* use 1 us as default */
 	rcdev->ops->deassert(rcdev, id);
 	return 0;
 }
@@ -28,7 +30,7 @@ qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
 
 	rst = to_qcom_reset_controller(rcdev);
 	map = &rst->reset_map[id];
-	mask = BIT(map->bit);
+	mask = map->bitmask ? map->bitmask : BIT(map->bit);
 
 	return regmap_update_bits(rst->regmap, map->reg, mask, mask);
 }
@@ -42,7 +44,7 @@ qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
 
 	rst = to_qcom_reset_controller(rcdev);
 	map = &rst->reset_map[id];
-	mask = BIT(map->bit);
+	mask = map->bitmask ? map->bitmask : BIT(map->bit);
 
 	return regmap_update_bits(rst->regmap, map->reg, mask, 0);
 }

drivers/clk/qcom/reset.h

@@ -11,6 +11,8 @@
 struct qcom_reset_map {
 	unsigned int reg;
 	u8 bit;
+	u8 udelay;
+	u32 bitmask;
 };
 
 struct regmap;

drivers/extcon/extcon.c

@@ -196,6 +196,14 @@ static const struct __extcon_info {
  * @attr_name:		"name" sysfs entry
  * @attr_state:		"state" sysfs entry
  * @attrs:		the array pointing to attr_name and attr_state for attr_g
+ * @usb_propval:	the array of USB connector properties
+ * @chg_propval:	the array of charger connector properties
+ * @jack_propval:	the array of jack connector properties
+ * @disp_propval:	the array of display connector properties
+ * @usb_bits:		the bit array of the USB connector property capabilities
+ * @chg_bits:		the bit array of the charger connector property capabilities
+ * @jack_bits:		the bit array of the jack connector property capabilities
+ * @disp_bits:		the bit array of the display connector property capabilities
  */
 struct extcon_cable {
 	struct extcon_dev *edev;

drivers/gpu/drm/i915/display/intel_psr.c

@@ -862,9 +862,9 @@ static bool _compute_psr2_wake_times(struct intel_dp *intel_dp,
 	}
 
 	io_wake_lines = intel_usecs_to_scanlines(
-		&crtc_state->uapi.adjusted_mode, io_wake_time);
+		&crtc_state->hw.adjusted_mode, io_wake_time);
 	fast_wake_lines = intel_usecs_to_scanlines(
-		&crtc_state->uapi.adjusted_mode, fast_wake_time);
+		&crtc_state->hw.adjusted_mode, fast_wake_time);
 
 	if (io_wake_lines > max_wake_lines ||
 	    fast_wake_lines > max_wake_lines)

drivers/hwtracing/coresight/coresight-core.c

@@ -1421,13 +1421,8 @@ static int coresight_remove_match(struct device *dev, void *data)
 		if (csdev->dev.fwnode == conn->child_fwnode) {
 			iterator->orphan = true;
 			coresight_remove_links(iterator, conn);
-			/*
-			 * Drop the reference to the handle for the remote
-			 * device acquired in parsing the connections from
-			 * platform data.
-			 */
-			fwnode_handle_put(conn->child_fwnode);
-			conn->child_fwnode = NULL;
+
+			conn->child_dev = NULL;
 			/* No need to continue */
 			break;
 		}

drivers/iio/accel/fxls8962af-core.c

@@ -486,8 +486,7 @@ static int fxls8962af_set_watermark(struct iio_dev *indio_dev, unsigned val)
 		.sign = 's', \
 		.realbits = 12, \
 		.storagebits = 16, \
-		.shift = 4, \
-		.endianness = IIO_BE, \
+		.endianness = IIO_LE, \
 	}, \
 }
 
@@ -656,9 +655,10 @@ static int fxls8962af_fifo_transfer(struct fxls8962af_data *data,
 	int total_length = samples * sample_length;
 	int ret;
 
-	if (i2c_verify_client(dev))
+	if (i2c_verify_client(dev) &&
+	    data->chip_info->chip_id == FXLS8962AF_DEVICE_ID)
 		/*
-		 * Due to errata bug:
+		 * Due to errata bug (only applicable on fxls8962af):
 		 * E3: FIFO burst read operation error using I2C interface
 		 * We have to avoid burst reads on I2C..
 		 */

drivers/iio/adc/ad7192.c

@@ -327,7 +327,7 @@ static int ad7192_of_clock_select(struct ad7192_state *st)
 	clock_sel = AD7192_CLK_INT;
 
 	/* use internal clock */
-	if (st->mclk) {
+	if (!st->mclk) {
 		if (of_property_read_bool(np, "adi,int-clock-output-enable"))
 			clock_sel = AD7192_CLK_INT_CO;
 	} else {
@@ -340,9 +340,9 @@ static int ad7192_of_clock_select(struct ad7192_state *st)
 	return clock_sel;
 }
 
-static int ad7192_setup(struct ad7192_state *st, struct device_node *np)
+static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np)
 {
-	struct iio_dev *indio_dev = spi_get_drvdata(st->sd.spi);
+	struct ad7192_state *st = iio_priv(indio_dev);
 	bool rej60_en, refin2_en;
 	bool buf_en, bipolar, burnout_curr_en;
 	unsigned long long scale_uv;
@@ -1015,7 +1015,7 @@ static int ad7192_probe(struct spi_device *spi)
 		}
 	}
 
-	ret = ad7192_setup(st, spi->dev.of_node);
+	ret = ad7192_setup(indio_dev, spi->dev.of_node);
 	if (ret)
 		return ret;
 

drivers/md/raid10.c

@@ -297,7 +297,7 @@ static void raid_end_bio_io(struct r10bio *r10_bio)
 	if (!test_bit(R10BIO_Uptodate, &r10_bio->state))
 		bio->bi_status = BLK_STS_IOERR;
 
-	if (blk_queue_io_stat(bio->bi_bdev->bd_disk->queue))
+	if (r10_bio->start_time)
 		bio_end_io_acct(bio, r10_bio->start_time);
 	bio_endio(bio);
 	/*

drivers/media/cec/i2c/Kconfig

@@ -5,6 +5,7 @@
 config CEC_CH7322
 	tristate "Chrontel CH7322 CEC controller"
 	depends on I2C
+	select REGMAP
 	select REGMAP_I2C
 	select CEC_CORE
 	help

drivers/media/i2c/st-mipid02.c

@@ -710,8 +710,13 @@ static void mipid02_set_fmt_source(struct v4l2_subdev *sd,
 {
 	struct mipid02_dev *bridge = to_mipid02_dev(sd);
 
-	/* source pad mirror active sink pad */
+	/* source pad mirror sink pad */
+	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
 		format->format = bridge->fmt;
+	else
+		format->format = *v4l2_subdev_get_try_format(sd, sd_state,
+							     MIPID02_SINK_0);
+
 	/* but code may need to be converted */
 	format->format.code = serial_to_parallel_code(format->format.code);
 

drivers/media/platform/qcom/venus/helpers.c

@@ -981,8 +981,8 @@ static u32 get_framesize_raw_yuv420_tp10_ubwc(u32 width, u32 height)
 	u32 extradata = SZ_16K;
 	u32 size;
 
-	y_stride = ALIGN(ALIGN(width, 192) * 4 / 3, 256);
-	uv_stride = ALIGN(ALIGN(width, 192) * 4 / 3, 256);
+	y_stride = ALIGN(width * 4 / 3, 256);
+	uv_stride = ALIGN(width * 4 / 3, 256);
 	y_sclines = ALIGN(height, 16);
 	uv_sclines = ALIGN((height + 1) >> 1, 16);
 

drivers/media/usb/dvb-usb-v2/az6007.c

@@ -202,7 +202,8 @@ static int az6007_rc_query(struct dvb_usb_device *d)
 	unsigned code;
 	enum rc_proto proto;
 
-	az6007_read(d, AZ6007_READ_IR, 0, 0, st->data, 10);
+	if (az6007_read(d, AZ6007_READ_IR, 0, 0, st->data, 10) < 0)
+		return -EIO;
 
 	if (st->data[1] == 0x44)
 		return 0;

drivers/media/usb/siano/smsusb.c

@@ -179,6 +179,7 @@ static void smsusb_stop_streaming(struct smsusb_device_t *dev)
 
 	for (i = 0; i < MAX_URBS; i++) {
 		usb_kill_urb(&dev->surbs[i].urb);
+		if (dev->surbs[i].wq.func)
 			cancel_work_sync(&dev->surbs[i].wq);
 
 		if (dev->surbs[i].cb) {

drivers/mfd/intel-lpss-acpi.c

@@ -148,6 +148,9 @@ static int intel_lpss_acpi_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	info->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!info->mem)
+		return -ENODEV;
+
 	info->irq = platform_get_irq(pdev, 0);
 
 	ret = intel_lpss_probe(&pdev->dev, info);

drivers/mfd/rt5033.c

@@ -41,9 +41,6 @@ static const struct mfd_cell rt5033_devs[] = {
 	{
 		.name = "rt5033-charger",
 		.of_compatible = "richtek,rt5033-charger",
-	}, {
-		.name = "rt5033-battery",
-		.of_compatible = "richtek,rt5033-battery",
 	}, {
 		.name = "rt5033-led",
 		.of_compatible = "richtek,rt5033-led",

drivers/mfd/stmfx.c

@@ -330,9 +330,8 @@ static int stmfx_chip_init(struct i2c_client *client)
 	stmfx->vdd = devm_regulator_get_optional(&client->dev, "vdd");
 	ret = PTR_ERR_OR_ZERO(stmfx->vdd);
 	if (ret) {
-		if (ret == -ENODEV)
 		stmfx->vdd = NULL;
-		else
+		if (ret != -ENODEV)
 			return dev_err_probe(&client->dev, ret, "Failed to get VDD regulator\n");
 	}
 
@@ -387,7 +386,7 @@ static int stmfx_chip_init(struct i2c_client *client)
 
 err:
 	if (stmfx->vdd)
-		return regulator_disable(stmfx->vdd);
+		regulator_disable(stmfx->vdd);
 
 	return ret;
 }

drivers/mfd/stmpe.c

@@ -1498,9 +1498,9 @@ int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum)
 
 int stmpe_remove(struct stmpe *stmpe)
 {
-	if (!IS_ERR(stmpe->vio))
+	if (!IS_ERR(stmpe->vio) && regulator_is_enabled(stmpe->vio))
 		regulator_disable(stmpe->vio);
-	if (!IS_ERR(stmpe->vcc))
+	if (!IS_ERR(stmpe->vcc) && regulator_is_enabled(stmpe->vcc))
 		regulator_disable(stmpe->vcc);
 
 	__stmpe_disable(stmpe, STMPE_BLOCK_ADC);

drivers/nvmem/rmem.c

@@ -71,6 +71,7 @@ static int rmem_probe(struct platform_device *pdev)
 	config.dev = dev;
 	config.priv = priv;
 	config.name = "rmem";
+	config.id = NVMEM_DEVID_AUTO;
 	config.size = mem->size;
 	config.reg_read = rmem_read;
 

drivers/phy/tegra/xusb.c

@@ -562,6 +562,7 @@ static void tegra_xusb_port_unregister(struct tegra_xusb_port *port)
 		usb_role_switch_unregister(port->usb_role_sw);
 		cancel_work_sync(&port->usb_phy_work);
 		usb_remove_phy(&port->usb_phy);
+		port->usb_phy.dev->driver = NULL;
 	}
 
 	if (port->ops->remove)
@@ -668,6 +669,9 @@ static int tegra_xusb_setup_usb_role_switch(struct tegra_xusb_port *port)
 	port->dev.driver = devm_kzalloc(&port->dev,
 					sizeof(struct device_driver),
 					GFP_KERNEL);
+	if (!port->dev.driver)
+		return -ENOMEM;
+
 	port->dev.driver->owner	 = THIS_MODULE;
 
 	port->usb_role_sw = usb_role_switch_register(&port->dev,

drivers/pwm/pwm-ab8500.c

@@ -96,7 +96,7 @@ static int ab8500_pwm_probe(struct platform_device *pdev)
 	int err;
 
 	if (pdev->id < 1 || pdev->id > 31)
-		return dev_err_probe(&pdev->dev, EINVAL, "Invalid device id %d\n", pdev->id);
+		return dev_err_probe(&pdev->dev, -EINVAL, "Invalid device id %d\n", pdev->id);
 
 	/*
 	 * Nothing to be done in probe, this is required to get the

drivers/pwm/pwm-imx-tpm.c

@@ -397,6 +397,13 @@ static int __maybe_unused pwm_imx_tpm_suspend(struct device *dev)
 	if (tpm->enable_count > 0)
 		return -EBUSY;
 
+	/*
+	 * Force 'real_period' to be zero to force period update code
+	 * can be executed after system resume back, since suspend causes
+	 * the period related registers to become their reset values.
+	 */
+	tpm->real_period = 0;
+
 	clk_disable_unprepare(tpm->clk);
 
 	return 0;

drivers/pwm/pwm-mtk-disp.c

@@ -79,14 +79,11 @@ static int mtk_disp_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	if (state->polarity != PWM_POLARITY_NORMAL)
 		return -EINVAL;
 
-	if (!state->enabled) {
-		mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
-					 0x0);
-
-		if (mdp->enabled) {
+	if (!state->enabled && mdp->enabled) {
+		mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN,
+					 mdp->data->enable_mask, 0x0);
 		clk_disable_unprepare(mdp->clk_mm);
 		clk_disable_unprepare(mdp->clk_main);
-		}
 
 		mdp->enabled = false;
 		return 0;

drivers/pwm/sysfs.c

@@ -424,6 +424,13 @@ static int pwm_class_resume_npwm(struct device *parent, unsigned int npwm)
 		if (!export)
 			continue;
 
+		/* If pwmchip was not enabled before suspend, do nothing. */
+		if (!export->suspend.enabled) {
+			/* release lock taken in pwm_class_get_state */
+			mutex_unlock(&export->lock);
+			continue;
+		}
+
 		state.enabled = export->suspend.enabled;
 		ret = pwm_class_apply_state(export, pwm, &state);
 		if (ret < 0)
@@ -448,7 +455,17 @@ static int __maybe_unused pwm_class_suspend(struct device *parent)
 		if (!export)
 			continue;
 
+		/*
+		 * If pwmchip was not enabled before suspend, save
+		 * state for resume time and do nothing else.
+		 */
 		export->suspend = state;
+		if (!state.enabled) {
+			/* release lock taken in pwm_class_get_state */
+			mutex_unlock(&export->lock);
+			continue;
+		}
+
 		state.enabled = false;
 		ret = pwm_class_apply_state(export, pwm, &state);
 		if (ret < 0) {

drivers/rtc/rtc-st-lpc.c

@@ -228,7 +228,7 @@ static int st_rtc_probe(struct platform_device *pdev)
 	enable_irq_wake(rtc->irq);
 	disable_irq(rtc->irq);
 
-	rtc->clk = clk_get(&pdev->dev, NULL);
+	rtc->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(rtc->clk)) {
 		dev_err(&pdev->dev, "Unable to request clock\n");
 		return PTR_ERR(rtc->clk);

drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c

@@ -1198,7 +1198,7 @@ static int gmin_get_config_dsm_var(struct device *dev,
 	dev_info(dev, "found _DSM entry for '%s': %s\n", var,
 		 cur->string.pointer);
 	strscpy(out, cur->string.pointer, *out_len);
-	*out_len = strlen(cur->string.pointer);
+	*out_len = strlen(out);
 
 	ACPI_FREE(obj);
 	return 0;

drivers/tty/serial/8250/8250_omap.c

@@ -653,6 +653,8 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id)
 	if ((lsr & UART_LSR_OE) && up->overrun_backoff_time_ms > 0) {
 		unsigned long delay;
 
+		/* Synchronize UART_IER access against the console. */
+		spin_lock(&port->lock);
 		up->ier = port->serial_in(port, UART_IER);
 		if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) {
 			port->ops->stop_rx(port);
@@ -662,6 +664,7 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id)
 			 */
 			cancel_delayed_work(&up->overrun_backoff);
 		}
+		spin_unlock(&port->lock);
 
 		delay = msecs_to_jiffies(up->overrun_backoff_time_ms);
 		schedule_delayed_work(&up->overrun_backoff, delay);
@@ -1469,7 +1472,9 @@ static int omap8250_probe(struct platform_device *pdev)
 err:
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_put_sync(&pdev->dev);
+	flush_work(&priv->qos_work);
 	pm_runtime_disable(&pdev->dev);
+	cpu_latency_qos_remove_request(&priv->pm_qos_request);
 	return ret;
 }
 
@@ -1516,25 +1521,35 @@ static int omap8250_suspend(struct device *dev)
 {
 	struct omap8250_priv *priv = dev_get_drvdata(dev);
 	struct uart_8250_port *up = serial8250_get_port(priv->line);
+	int err;
 
 	serial8250_suspend_port(priv->line);
 
-	pm_runtime_get_sync(dev);
+	err = pm_runtime_resume_and_get(dev);
+	if (err)
+		return err;
 	if (!device_may_wakeup(dev))
 		priv->wer = 0;
 	serial_out(up, UART_OMAP_WER, priv->wer);
-	pm_runtime_mark_last_busy(dev);
-	pm_runtime_put_autosuspend(dev);
-
+	err = pm_runtime_force_suspend(dev);
 	flush_work(&priv->qos_work);
-	return 0;
+
+	return err;
 }
 
 static int omap8250_resume(struct device *dev)
 {
 	struct omap8250_priv *priv = dev_get_drvdata(dev);
+	int err;
 
+	err = pm_runtime_force_resume(dev);
+	if (err)
+		return err;
 	serial8250_resume_port(priv->line);
+	/* Paired with pm_runtime_resume_and_get() in omap8250_suspend() */
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
 	return 0;
 }
 #else

drivers/usb/core/devio.c

@@ -735,6 +735,7 @@ static int driver_resume(struct usb_interface *intf)
 	return 0;
 }
 
+#ifdef CONFIG_PM
 /* The following routines apply to the entire device, not interfaces */
 void usbfs_notify_suspend(struct usb_device *udev)
 {
@@ -753,6 +754,7 @@ void usbfs_notify_resume(struct usb_device *udev)
 	}
 	mutex_unlock(&usbfs_mutex);
 }
+#endif
 
 struct usb_driver usbfs_driver = {
 	.name =		"usbfs",

drivers/usb/dwc2/platform.c

@@ -205,6 +205,11 @@ int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
 	return ret;
 }
 
+static void dwc2_reset_control_assert(void *data)
+{
+	reset_control_assert(data);
+}
+
 static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
 {
 	int i, ret;
@@ -217,6 +222,10 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
 	}
 
 	reset_control_deassert(hsotg->reset);
+	ret = devm_add_action_or_reset(hsotg->dev, dwc2_reset_control_assert,
+				       hsotg->reset);
+	if (ret)
+		return ret;
 
 	hsotg->reset_ecc = devm_reset_control_get_optional(hsotg->dev, "dwc2-ecc");
 	if (IS_ERR(hsotg->reset_ecc)) {
@@ -226,6 +235,10 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
 	}
 
 	reset_control_deassert(hsotg->reset_ecc);
+	ret = devm_add_action_or_reset(hsotg->dev, dwc2_reset_control_assert,
+				       hsotg->reset_ecc);
+	if (ret)
+		return ret;
 
 	/*
 	 * Attempt to find a generic PHY, then look for an old style
@@ -352,10 +365,7 @@ static int dwc2_driver_remove(struct platform_device *dev)
 	if (hsotg->ll_hw_enabled)
 		dwc2_lowlevel_hw_disable(hsotg);
 
-	reset_control_assert(hsotg->reset);
-	reset_control_assert(hsotg->reset_ecc);
-
-	return ret;
+	return 0;
 }
 
 /**

drivers/usb/dwc3/dwc3-meson-g12a.c

@@ -805,7 +805,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 
 	ret = dwc3_meson_g12a_otg_init(pdev, priv);
 	if (ret)
-		goto err_phys_power;
+		goto err_plat_depopulate;
 
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
@@ -813,6 +813,9 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_plat_depopulate:
+	of_platform_depopulate(dev);
+
 err_phys_power:
 	for (i = 0 ; i < PHY_COUNT ; ++i)
 		phy_power_off(priv->phys[i]);

drivers/usb/dwc3/dwc3-qcom.c

@@ -727,6 +727,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 	struct device		*dev = &pdev->dev;
 	struct dwc3_qcom	*qcom;
 	struct resource		*res, *parent_res = NULL;
+	struct resource		local_res;
 	int			ret, i;
 	bool			ignore_pipe_clk;
 
@@ -777,9 +778,8 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 	if (np) {
 		parent_res = res;
 	} else {
-		parent_res = kmemdup(res, sizeof(struct resource), GFP_KERNEL);
-		if (!parent_res)
-			return -ENOMEM;
+		memcpy(&local_res, res, sizeof(struct resource));
+		parent_res = &local_res;
 
 		parent_res->start = res->start +
 			qcom->acpi_pdata->qscratch_base_offset;
@@ -791,9 +791,10 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 			if (IS_ERR_OR_NULL(qcom->urs_usb)) {
 				dev_err(dev, "failed to create URS USB platdev\n");
 				if (!qcom->urs_usb)
-					return -ENODEV;
+					ret = -ENODEV;
 				else
-					return PTR_ERR(qcom->urs_usb);
+					ret = PTR_ERR(qcom->urs_usb);
+				goto clk_disable;
 			}
 		}
 	}
@@ -873,11 +874,15 @@ reset_assert:
 static int dwc3_qcom_remove(struct platform_device *pdev)
 {
 	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
+	struct device_node *np = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
 	int i;
 
 	device_remove_software_node(&qcom->dwc3->dev);
-	of_platform_depopulate(dev);
+	if (np)
+		of_platform_depopulate(&pdev->dev);
+	else
+		platform_device_put(pdev);
 
 	for (i = qcom->num_clocks - 1; i >= 0; i--) {
 		clk_disable_unprepare(qcom->clks[i]);

drivers/usb/dwc3/gadget.c

@@ -2620,7 +2620,9 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 	ret = pm_runtime_get_sync(dwc->dev);
 	if (!ret || ret < 0) {
 		pm_runtime_put(dwc->dev);
-		return 0;
+		if (ret < 0)
+			pm_runtime_set_suspended(dwc->dev);
+		return ret;
 	}
 
 	if (dwc->pullups_connected == is_on) {

drivers/usb/phy/phy-tahvo.c

@@ -395,7 +395,7 @@ static int tahvo_usb_probe(struct platform_device *pdev)
 
 	tu->irq = ret = platform_get_irq(pdev, 0);
 	if (ret < 0)
-		return ret;
+		goto err_remove_phy;
 	ret = request_threaded_irq(tu->irq, NULL, tahvo_usb_vbus_interrupt,
 				   IRQF_ONESHOT,
 				   "tahvo-vbus", tu);

drivers/usb/serial/option.c

@@ -1151,6 +1151,10 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x90fa),
 	  .driver_info = RSVD(3) },
 	/* u-blox products */
+	{ USB_DEVICE(UBLOX_VENDOR_ID, 0x1311) },	/* u-blox LARA-R6 01B */
+	{ USB_DEVICE(UBLOX_VENDOR_ID, 0x1312),		/* u-blox LARA-R6 01B (RMNET) */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(UBLOX_VENDOR_ID, 0x1313, 0xff) },	/* u-blox LARA-R6 01B (ECM) */
 	{ USB_DEVICE(UBLOX_VENDOR_ID, 0x1341) },	/* u-blox LARA-L6 */
 	{ USB_DEVICE(UBLOX_VENDOR_ID, 0x1342),		/* u-blox LARA-L6 (RMNET) */
 	  .driver_info = RSVD(4) },

drivers/w1/slaves/w1_therm.c

@@ -1093,14 +1093,6 @@ static int convert_t(struct w1_slave *sl, struct therm_info *info)
 
 			w1_write_8(dev_master, W1_CONVERT_TEMP);
 
-			if (strong_pullup) { /*some device need pullup */
-				sleep_rem = msleep_interruptible(t_conv);
-				if (sleep_rem != 0) {
-					ret = -EINTR;
-					goto mt_unlock;
-				}
-				mutex_unlock(&dev_master->bus_mutex);
-			} else { /*no device need pullup */
 			if (SLAVE_FEATURES(sl) & W1_THERM_POLL_COMPLETION) {
 				ret = w1_poll_completion(dev_master, W1_POLL_CONVERT_TEMP);
 				if (ret) {
@@ -1108,8 +1100,14 @@ static int convert_t(struct w1_slave *sl, struct therm_info *info)
 					goto mt_unlock;
 				}
 				mutex_unlock(&dev_master->bus_mutex);
-				} else {
-					/* Fixed delay */
+			} else if (!strong_pullup) { /*no device need pullup */
+				sleep_rem = msleep_interruptible(t_conv);
+				if (sleep_rem != 0) {
+					ret = -EINTR;
+					goto mt_unlock;
+				}
+				mutex_unlock(&dev_master->bus_mutex);
+			} else { /*some device need pullup */
 				mutex_unlock(&dev_master->bus_mutex);
 				sleep_rem = msleep_interruptible(t_conv);
 				if (sleep_rem != 0) {
@@ -1117,7 +1115,6 @@ static int convert_t(struct w1_slave *sl, struct therm_info *info)
 					goto dec_refcnt;
 				}
 			}
-			}
 			ret = read_scratchpad(sl, info);
 
 			/* If enabled, check for conversion success */

drivers/w1/w1.c

@@ -1263,10 +1263,10 @@ err_out_exit_init:
 
 static void __exit w1_fini(void)
 {
-	struct w1_master *dev;
+	struct w1_master *dev, *n;
 
 	/* Set netlink removal messages and some cleanup */
-	list_for_each_entry(dev, &w1_masters, w1_master_entry)
+	list_for_each_entry_safe(dev, n, &w1_masters, w1_master_entry)
 		__w1_remove_master_device(dev);
 
 	w1_fini_netlink();

fs/kernfs/dir.c

@@ -637,7 +637,9 @@ static struct kernfs_node *__kernfs_new_node(struct kernfs_root *root,
 	return kn;
 
  err_out3:
+	spin_lock(&kernfs_idr_lock);
 	idr_remove(&root->ino_idr, (u32)kernfs_ino(kn));
+	spin_unlock(&kernfs_idr_lock);
  err_out2:
 	kmem_cache_free(kernfs_node_cache, kn);
  err_out1:

include/uapi/linux/affs_hardblocks.h

@@ -7,42 +7,42 @@
 /* Just the needed definitions for the RDB of an Amiga HD. */
 
 struct RigidDiskBlock {
-	__u32	rdb_ID;
+	__be32	rdb_ID;
 	__be32	rdb_SummedLongs;
-	__s32	rdb_ChkSum;
-	__u32	rdb_HostID;
+	__be32	rdb_ChkSum;
+	__be32	rdb_HostID;
 	__be32	rdb_BlockBytes;
-	__u32	rdb_Flags;
-	__u32	rdb_BadBlockList;
+	__be32	rdb_Flags;
+	__be32	rdb_BadBlockList;
 	__be32	rdb_PartitionList;
-	__u32	rdb_FileSysHeaderList;
-	__u32	rdb_DriveInit;
-	__u32	rdb_Reserved1[6];
-	__u32	rdb_Cylinders;
-	__u32	rdb_Sectors;
-	__u32	rdb_Heads;
-	__u32	rdb_Interleave;
-	__u32	rdb_Park;
-	__u32	rdb_Reserved2[3];
-	__u32	rdb_WritePreComp;
-	__u32	rdb_ReducedWrite;
-	__u32	rdb_StepRate;
-	__u32	rdb_Reserved3[5];
-	__u32	rdb_RDBBlocksLo;
-	__u32	rdb_RDBBlocksHi;
-	__u32	rdb_LoCylinder;
-	__u32	rdb_HiCylinder;
-	__u32	rdb_CylBlocks;
-	__u32	rdb_AutoParkSeconds;
-	__u32	rdb_HighRDSKBlock;
-	__u32	rdb_Reserved4;
+	__be32	rdb_FileSysHeaderList;
+	__be32	rdb_DriveInit;
+	__be32	rdb_Reserved1[6];
+	__be32	rdb_Cylinders;
+	__be32	rdb_Sectors;
+	__be32	rdb_Heads;
+	__be32	rdb_Interleave;
+	__be32	rdb_Park;
+	__be32	rdb_Reserved2[3];
+	__be32	rdb_WritePreComp;
+	__be32	rdb_ReducedWrite;
+	__be32	rdb_StepRate;
+	__be32	rdb_Reserved3[5];
+	__be32	rdb_RDBBlocksLo;
+	__be32	rdb_RDBBlocksHi;
+	__be32	rdb_LoCylinder;
+	__be32	rdb_HiCylinder;
+	__be32	rdb_CylBlocks;
+	__be32	rdb_AutoParkSeconds;
+	__be32	rdb_HighRDSKBlock;
+	__be32	rdb_Reserved4;
 	char	rdb_DiskVendor[8];
 	char	rdb_DiskProduct[16];
 	char	rdb_DiskRevision[4];
 	char	rdb_ControllerVendor[8];
 	char	rdb_ControllerProduct[16];
 	char	rdb_ControllerRevision[4];
-	__u32	rdb_Reserved5[10];
+	__be32	rdb_Reserved5[10];
 };
 
 #define	IDNAME_RIGIDDISK	0x5244534B	/* "RDSK" */
@@ -50,16 +50,16 @@ struct RigidDiskBlock {
 struct PartitionBlock {
 	__be32	pb_ID;
 	__be32	pb_SummedLongs;
-	__s32	pb_ChkSum;
-	__u32	pb_HostID;
+	__be32	pb_ChkSum;
+	__be32	pb_HostID;
 	__be32	pb_Next;
-	__u32	pb_Flags;
-	__u32	pb_Reserved1[2];
-	__u32	pb_DevFlags;
+	__be32	pb_Flags;
+	__be32	pb_Reserved1[2];
+	__be32	pb_DevFlags;
 	__u8	pb_DriveName[32];
-	__u32	pb_Reserved2[15];
+	__be32	pb_Reserved2[15];
 	__be32	pb_Environment[17];
-	__u32	pb_EReserved[15];
+	__be32	pb_EReserved[15];
 };
 
 #define	IDNAME_PARTITION	0x50415254	/* "PART" */

include/uapi/linux/videodev2.h

@@ -1652,7 +1652,7 @@ struct v4l2_input {
 	__u8	     name[32];		/*  Label */
 	__u32	     type;		/*  Type of input */
 	__u32	     audioset;		/*  Associated audios (bitfield) */
-	__u32        tuner;             /*  enum v4l2_tuner_type */
+	__u32        tuner;             /*  Tuner index */
 	v4l2_std_id  std;
 	__u32	     status;
 	__u32	     capabilities;

lib/test_firmware.c

@@ -183,7 +183,7 @@ static int __kstrncpy(char **dst, const char *name, size_t count, gfp_t gfp)
 {
 	*dst = kstrndup(name, count, gfp);
 	if (!*dst)
-		return -ENOSPC;
+		return -ENOMEM;
 	return count;
 }
 
@@ -606,7 +606,7 @@ static ssize_t trigger_request_store(struct device *dev,
 
 	name = kstrndup(buf, count, GFP_KERNEL);
 	if (!name)
-		return -ENOSPC;
+		return -ENOMEM;
 
 	pr_info("loading '%s'\n", name);
 
@@ -654,7 +654,7 @@ static ssize_t trigger_request_platform_store(struct device *dev,
 
 	name = kstrndup(buf, count, GFP_KERNEL);
 	if (!name)
-		return -ENOSPC;
+		return -ENOMEM;
 
 	pr_info("inserting test platform fw '%s'\n", name);
 	efi_embedded_fw.name = name;
@@ -707,7 +707,7 @@ static ssize_t trigger_async_request_store(struct device *dev,
 
 	name = kstrndup(buf, count, GFP_KERNEL);
 	if (!name)
-		return -ENOSPC;
+		return -ENOMEM;
 
 	pr_info("loading '%s'\n", name);
 
@@ -752,7 +752,7 @@ static ssize_t trigger_custom_fallback_store(struct device *dev,
 
 	name = kstrndup(buf, count, GFP_KERNEL);
 	if (!name)
-		return -ENOSPC;
+		return -ENOMEM;
 
 	pr_info("loading '%s' using custom fallback mechanism\n", name);
 
@@ -803,7 +803,7 @@ static int test_fw_run_batch_request(void *data)
 
 		test_buf = kzalloc(TEST_FIRMWARE_BUF_SIZE, GFP_KERNEL);
 		if (!test_buf)
-			return -ENOSPC;
+			return -ENOMEM;
 
 		if (test_fw_config->partial)
 			req->rc = request_partial_firmware_into_buf

net/sched/act_ipt.c

@@ -50,7 +50,7 @@ static int ipt_init_target(struct net *net, struct xt_entry_target *t,
 	par.entryinfo = &e;
 	par.target    = target;
 	par.targinfo  = t->data;
-	par.hook_mask = hook;
+	par.hook_mask = 1 << hook;
 	par.family    = NFPROTO_IPV4;
 
 	ret = xt_check_target(&par, t->u.target_size - sizeof(*t), 0, false);
@@ -87,7 +87,8 @@ static void tcf_ipt_release(struct tc_action *a)
 
 static const struct nla_policy ipt_policy[TCA_IPT_MAX + 1] = {
 	[TCA_IPT_TABLE]	= { .type = NLA_STRING, .len = IFNAMSIZ },
-	[TCA_IPT_HOOK]	= { .type = NLA_U32 },
+	[TCA_IPT_HOOK]	= NLA_POLICY_RANGE(NLA_U32, NF_INET_PRE_ROUTING,
+					   NF_INET_NUMHOOKS),
 	[TCA_IPT_INDEX]	= { .type = NLA_U32 },
 	[TCA_IPT_TARG]	= { .len = sizeof(struct xt_entry_target) },
 };
@@ -160,15 +161,27 @@ static int __tcf_ipt_init(struct net *net, unsigned int id, struct nlattr *nla,
 			return -EEXIST;
 		}
 	}
-	hook = nla_get_u32(tb[TCA_IPT_HOOK]);
 
-	err = -ENOMEM;
-	tname = kmalloc(IFNAMSIZ, GFP_KERNEL);
+	err = -EINVAL;
+	hook = nla_get_u32(tb[TCA_IPT_HOOK]);
+	switch (hook) {
+	case NF_INET_PRE_ROUTING:
+		break;
+	case NF_INET_POST_ROUTING:
+		break;
+	default:
+		goto err1;
+	}
+
+	if (tb[TCA_IPT_TABLE]) {
+		/* mangle only for now */
+		if (nla_strcmp(tb[TCA_IPT_TABLE], "mangle"))
+			goto err1;
+	}
+
+	tname = kstrdup("mangle", GFP_KERNEL);
 	if (unlikely(!tname))
 		goto err1;
-	if (tb[TCA_IPT_TABLE] == NULL ||
-	    nla_strscpy(tname, tb[TCA_IPT_TABLE], IFNAMSIZ) >= IFNAMSIZ)
-		strcpy(tname, "mangle");
 
 	t = kmemdup(td, td->u.target_size, GFP_KERNEL);
 	if (unlikely(!t))

net/sctp/socket.c

@@ -362,9 +362,9 @@ static void sctp_auto_asconf_init(struct sctp_sock *sp)
 	struct net *net = sock_net(&sp->inet.sk);
 
 	if (net->sctp.default_auto_asconf) {
-		spin_lock(&net->sctp.addr_wq_lock);
+		spin_lock_bh(&net->sctp.addr_wq_lock);
 		list_add_tail(&sp->auto_asconf_list, &net->sctp.auto_asconf_splist);
-		spin_unlock(&net->sctp.addr_wq_lock);
+		spin_unlock_bh(&net->sctp.addr_wq_lock);
 		sp->do_auto_asconf = 1;
 	}
 }

net/sunrpc/svcsock.c

@@ -685,12 +685,6 @@ static void svc_tcp_listen_data_ready(struct sock *sk)
 {
 	struct svc_sock	*svsk = (struct svc_sock *)sk->sk_user_data;
 
-	if (svsk) {
-		/* Refer to svc_setup_socket() for details. */
-		rmb();
-		svsk->sk_odata(sk);
-	}
-
 	/*
 	 * This callback may called twice when a new connection
 	 * is established as a child socket inherits everything
@@ -699,14 +693,19 @@ static void svc_tcp_listen_data_ready(struct sock *sk)
 	 *    when one of child sockets become ESTABLISHED.
 	 * 2) data_ready method of the child socket may be called
 	 *    when it receives data before the socket is accepted.
-	 * In case of 2, we should ignore it silently.
+	 * In case of 2, we should ignore it silently and DO NOT
+	 * dereference svsk.
 	 */
-	if (sk->sk_state == TCP_LISTEN) {
+	if (sk->sk_state != TCP_LISTEN)
+		return;
+
 	if (svsk) {
+		/* Refer to svc_setup_socket() for details. */
+		rmb();
+		svsk->sk_odata(sk);
 		set_bit(XPT_CONN, &svsk->sk_xprt.xpt_flags);
 		svc_xprt_enqueue(&svsk->sk_xprt);
 	}
-	}
 }
 
 /*

sound/core/jack.c

@@ -638,6 +638,7 @@ void snd_jack_report(struct snd_jack *jack, int status)
 	struct snd_jack_kctl *jack_kctl;
 	unsigned int mask_bits = 0;
 #ifdef CONFIG_SND_JACK_INPUT_DEV
+	struct input_dev *idev;
 	int i;
 #endif
 
@@ -654,14 +655,15 @@ void snd_jack_report(struct snd_jack *jack, int status)
 					     status & jack_kctl->mask_bits);
 
 #ifdef CONFIG_SND_JACK_INPUT_DEV
-	if (!jack->input_dev)
+	idev = input_get_device(jack->input_dev);
+	if (!idev)
 		return;
 
 	for (i = 0; i < ARRAY_SIZE(jack->key); i++) {
 		int testbit = ((SND_JACK_BTN_0 >> i) & ~mask_bits);
 
 		if (jack->type & testbit)
-			input_report_key(jack->input_dev, jack->key[i],
+			input_report_key(idev, jack->key[i],
 					 status & testbit);
 	}
 
@@ -669,12 +671,13 @@ void snd_jack_report(struct snd_jack *jack, int status)
 		int testbit = ((1 << i) & ~mask_bits);
 
 		if (jack->type & testbit)
-			input_report_switch(jack->input_dev,
+			input_report_switch(idev,
 					    jack_switch_types[i],
 					    status & testbit);
 	}
 
-	input_sync(jack->input_dev);
+	input_sync(idev);
+	input_put_device(idev);
 #endif /* CONFIG_SND_JACK_INPUT_DEV */
 }
 EXPORT_SYMBOL(snd_jack_report);

sound/pci/hda/patch_realtek.c

@@ -9242,6 +9242,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1558, 0x971d, "Clevo N970T[CDF]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0xa500, "Clevo NL5[03]RU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0xa600, "Clevo NL50NU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0xa650, "Clevo NP[567]0SN[CD]", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0xa671, "Clevo NP70SN[CDE]", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0xb018, "Clevo NP50D[BE]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0xb019, "Clevo NH77D[BE]Q", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),