anierin/msm-5.15
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge keystone/android13-5.15-keystone-qcom-release.123 (13f7506) into msm-5.15

Browse Source 
* refs/heads/tmp-13f7506:
  UPSTREAM: regmap: Drop initial version of maximum transfer length fixes
  BACKPORT: xhci: Keep interrupt disabled in initialization until host is running.
  BACKPORT: f2fs: allocate node blocks for atomic write block replacement
  BACKPORT: f2fs: use cow inode data when updating atomic write
  BACKPORT: f2fs: fix to check return value of inc_valid_block_count()
  BACKPORT: f2fs: fix to check return value of f2fs_do_truncate_blocks()
  BACKPORT: f2fs: fix null pointer panic in tracepoint in __replace_atomic_write_block
  BACKPORT: f2fs: synchronize atomic write aborts
  BACKPORT: f2fs: fix to handle F2FS_IOC_START_ATOMIC_REPLACE in f2fs_compat_ioctl()
  BACKPORT: f2fs: fix to abort atomic write only during do_exist()
  BACKPORT: f2fs: clear atomic_write_task in f2fs_abort_atomic_write()
  BACKPORT: f2fs: introduce trace_f2fs_replace_atomic_write_block
  BACKPORT: f2fs: introduce F2FS_IOC_START_ATOMIC_REPLACE
  BACKPORT: f2fs: correct i_size change for atomic writes
  BACKPORT: f2fs: change to use atomic_t type form sbi.atomic_files
  BACKPORT: f2fs: clean up f2fs_abort_atomic_write()
  BACKPORT: f2fs: fix null-ptr-deref in f2fs_get_dnode_of_data
  BACKPORT: f2fs: revive F2FS_IOC_ABORT_VOLATILE_WRITE
  BACKPORT: f2fs: introduce sysfs atomic write statistics
  BACKPORT: f2fs: add a sysfs entry to show zone capacity
  BACKPORT: f2fs: replace F2FS_I(inode) and sbi by the local variable
  BACKPORT: f2fs: avoid unneeded error handling for revoke_entry_slab allocation
  BACKPORT: f2fs: kill volatile write support
  BACKPORT: f2fs: change the current atomic write way
  UPSTREAM: netfilter: xt_u32: validate user space input
  UPSTREAM: netfilter: nfnetlink_osf: avoid OOB read
  UPSTREAM: net/sched: Retire rsvp classifier
  UPSTREAM: ipv4: fix null-deref in ipv4_link_failure
  UPSTREAM: netfilter: nf_tables: disallow rule removal from chain binding
  FROMGIT: usb: typec: ucsi: Clear EVENT_PENDING bit if ucsi_send_command fails
  UPSTREAM: f2fs: fix deadlock in i_xattr_sem and inode page lock
  UPSTREAM: mmc:block:fix in_flight[issue_type] value error
  Android Common Kernel: Initial commit
  UPSTREAM: net: sched: sch_qfq: Fix UAF in qfq_dequeue()
  UPSTREAM: net/sched: sch_hfsc: Ensure inner classes have fsc curve
  UPSTREAM: tty: n_gsm: fix the UAF caused by race condition in gsm_cleanup_mux
  BACKPORT: mm: page_alloc: fix CMA and HIGHATOMIC landing on the wrong buddy list
  UPSTREAM: ARM: ptrace: Restore syscall skipping for tracers
  UPSTREAM: ARM: ptrace: Restore syscall restart tracing
  ANDROID: ABI: Update oplus symbol list
  ANDROID: vendor_hooks: Add hooks for oem percpu-rwsem optimaton
  ANDROID: Update abi_gki_aarch64_qcom for usb typec orientation
  ANDROID: GKI: Update symbol list for Amlogic
  ANDROID: vendor_hooks: add vendor hook in xhci_urb_suitable_for_idt()
  ANDROID: GKI: Update symbol list for mtk
  ANDROID: tools/resolve_btfids: Pass CFLAGS to libsubcmd build via EXTRA_CFLAGS
  ANDROID: libsubcmd: Hoist iterator variable declarations in parse_options_subcommand()
  ANDROID: enable CONFIG_USB_XHCI_PCI_RENESAS in gki_defconfig
  ANDROID: GKI: Update oplus symbol list
  ANDROID: vendor_hooks: Add hooks for adjusting alloc_flags
  ANDROID: uid_sys_stat: instead update_io_stats_uid_locked to update_io_stats_uid
  ANDROID: uid_sys_stat: split the global lock uid_lock to the fine-grained locks for each hlist in hash_table.
  ANDROID: GKI: Update symbol list for Amlogic
  Revert "Revert "8250: add support for ASIX devices with a FIFO bug""
  BACKPORT: mm/damon/ops-common: atomically test and clear young on ptes and pmds
  Linux 5.15.123
  Revert "drm/amd/display: edp do not add non-edid timings"
  nixge: fix mac address error handling again
  tracing/histograms: Return an error if we fail to add histogram to hist_vars list
  jbd2: recheck chechpointing non-dirty buffer
  net: phy: prevent stale pointer dereference in phy_init()
  tcp: annotate data-races around fastopenq.max_qlen
  tcp: annotate data-races around icsk->icsk_user_timeout
  tcp: annotate data-races around tp->notsent_lowat
  tcp: annotate data-races around rskq_defer_accept
  tcp: annotate data-races around tp->linger2
  tcp: annotate data-races around icsk->icsk_syn_retries
  tcp: annotate data-races around tp->keepalive_probes
  tcp: annotate data-races around tp->keepalive_intvl
  tcp: annotate data-races around tp->keepalive_time
  tcp: annotate data-races around tp->tcp_tx_delay
  netfilter: nf_tables: skip bound chain on rule flush
  netfilter: nf_tables: skip bound chain in netns release path
  netfilter: nft_set_pipapo: fix improper element removal
  netfilter: nf_tables: fix spurious set element insertion failure
  llc: Don't drop packet from non-root netns.
  fbdev: au1200fb: Fix missing IRQ check in au1200fb_drv_probe
  Revert "tcp: avoid the lookup process failing to get sk in ehash table"
  net:ipv6: check return value of pskb_trim()
  net: ipv4: Use kfree_sensitive instead of kfree
  tcp: annotate data-races around tcp_rsk(req)->ts_recent
  igc: Prevent garbled TX queue with XDP ZEROCOPY
  bpf: Fix subprog idx logic in check_max_stack_depth
  octeontx2-pf: Dont allocate BPIDs for LBK interfaces
  security: keys: Modify mismatched function name
  iavf: Fix out-of-bounds when setting channels on remove
  iavf: Fix use-after-free in free_netdev
  net: sched: cls_bpf: Undo tcf_bind_filter in case of an error
  net: ethernet: mtk_eth_soc: handle probe deferral
  ethernet: use of_get_ethdev_address()
  of: net: add a helper for loading netdev->dev_addr
  ethernet: use eth_hw_addr_set() instead of ether_addr_copy()
  bridge: Add extack warning when enabling STP in netns.
  net: ethernet: ti: cpsw_ale: Fix cpsw_ale_get_field()/cpsw_ale_set_field()
  pinctrl: amd: Use amd_pinconf_set() for all config options
  perf build: Fix library not found error when using CSLIBS
  fbdev: imxfb: warn about invalid left/right margin
  spi: bcm63xx: fix max prepend length
  FS: JFS: Check for read-only mounted filesystem in txBegin
  FS: JFS: Fix null-ptr-deref Read in txBegin
  MIPS: dec: prom: Address -Warray-bounds warning
  fs: jfs: Fix UBSAN: array-index-out-of-bounds in dbAllocDmapLev
  udf: Fix uninitialized array access for some pathnames
  quota: fix warning in dqgrab()
  quota: Properly disable quotas when add_dquot_ref() fails
  ALSA: emu10k1: roll up loops in DSP setup code for Audigy
  drm/radeon: Fix integer overflow in radeon_cs_parser_init
  ext4: correct inline offset when handling xattrs in inode body
  ASoC: codecs: wcd938x: fix soundwire initialisation race
  ASoC: codecs: wcd938x: fix codec initialisation race
  ASoC: codecs: wcd934x: fix resource leaks on component remove
  ASoC: codecs: wcd938x: fix missing mbhc init error handling
  ASoC: codecs: wcd938x: fix resource leaks on component remove
  ASoC: codecs: wcd-mbhc-v2: fix resource leaks on component remove
  ASoC: codecs: wcd938x: fix missing clsh ctrl error handling
  ASoC: fsl_sai: Disable bit clock with transmitter
  drm/amd/display: Keep PHY active for DP displays on DCN31
  drm/amd/display: Disable MPC split by default on special asic
  drm/client: Fix memory leak in drm_client_modeset_probe
  drm/client: Fix memory leak in drm_client_target_cloned
  selftests: tc: add ConnTrack procfs kconfig
  can: bcm: Fix UAF in bcm_proc_show()
  regmap: Account for register length in SMBus I/O limits
  regmap: Drop initial version of maximum transfer length fixes
  selftests: tc: add 'ct' action kconfig dep
  selftests: tc: set timeout to 15 minutes
  fuse: ioctl: translate ENOSYS in outarg
  btrfs: zoned: fix memory leak after finding block group with super blocks
  fuse: revalidate: don't invalidate if interrupted
  btrfs: fix warning when putting transaction with qgroups enabled after abort
  perf probe: Add test for regression introduced by switch to die_get_decl_file()
  keys: Fix linking a duplicate key to a keyring's assoc_array
  ALSA: hda/realtek: Enable Mute LED on HP Laptop 15s-eq2xxx
  ALSA: hda/realtek: Add quirk for Clevo NS70AU
  ALSA: hda/realtek - remove 3k pull low procedure
  Linux 5.15.122
  x86/cpu/amd: Add a Zenbleed fix
  x86/cpu/amd: Move the errata checking functionality up
  Linux 5.15.121
  drm/atomic: Fix potential use-after-free in nonblocking commits
  net/sched: sch_qfq: reintroduce lmax bound check for MTU
  MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled
  scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
  scsi: qla2xxx: Pointer may be dereferenced
  scsi: qla2xxx: Correct the index of array
  scsi: qla2xxx: Check valid rport returned by fc_bsg_to_rport()
  scsi: qla2xxx: Fix potential NULL pointer dereference
  scsi: qla2xxx: Fix buffer overrun
  scsi: qla2xxx: Avoid fcport pointer dereference
  scsi: qla2xxx: Array index may go out of bound
  scsi: qla2xxx: Wait for io return on terminate rport
  tracing/probes: Fix to update dynamic data counter if fetcharg uses it
  tracing/probes: Fix not to count error code to total length
  selftests: mptcp: depend on SYN_COOKIES
  selftests: mptcp: sockopt: return error if wrong mark
  tracing: Fix null pointer dereference in tracing_err_log_open()
  xtensa: ISS: fix call to split_if_spec
  ftrace: Fix possible warning on checking all pages used in ftrace_process_locs()
  ring-buffer: Fix deadloop issue on reading trace_pipe
  net: ena: fix shift-out-of-bounds in exponential backoff
  samples: ftrace: Save required argument registers in sample trampolines
  tracing: Fix memory leak of iter->temp when reading trace_pipe
  tracing/histograms: Add histograms to hist_vars if they have referenced variables
  s390/decompressor: fix misaligned symbol build error
  bus: ixp4xx: fix IXP4XX_EXP_T1_MASK
  Revert "8250: add support for ASIX devices with a FIFO bug"
  soundwire: qcom: fix storing port config out-of-bounds
  opp: Fix use-after-free in lazy_opp_tables after probe deferral
  meson saradc: fix clock divider mask length
  xhci: Show ZHAOXIN xHCI root hub speed correctly
  xhci: Fix TRB prefetch issue of ZHAOXIN hosts
  xhci: Fix resume issue of some ZHAOXIN hosts
  ceph: don't let check_caps skip sending responses for revoke msgs
  libceph: harden msgr2.1 frame segment length checks
  firmware: stratix10-svc: Fix a potential resource leak in svc_create_memory_pool()
  tty: serial: imx: fix rs485 rx after tx
  tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk
  tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error
  serial: atmel: don't enable IRQs prematurely
  drm/ttm: Don't leak a resource on swapout move error
  drm/amdgpu: avoid restore process run into dead loop.
  drm/amd/display: Correct `DMUB_FW_VERSION` macro
  drm/amdgpu: fix clearing mappings for BOs that are always valid in VM
  drm/rockchip: vop: Leave vblank enabled in self-refresh
  drm/atomic: Allow vblank-enabled + self-refresh "disable"
  fs: dlm: return positive pid value for F_GETLK
  dm init: add dm-mod.waitfor to wait for asynchronously probed block devices
  md/raid0: add discard support for the 'original' layout
  mfd: pm8008: Fix module autoloading
  misc: pci_endpoint_test: Re-init completion for every test
  misc: pci_endpoint_test: Free IRQs before removing the device
  PCI: rockchip: Set address alignment for endpoint mode
  PCI: rockchip: Use u32 variable to access 32-bit registers
  PCI: rockchip: Fix legacy IRQ generation for RK3399 PCIe endpoint core
  PCI: rockchip: Add poll and timeout to wait for PHY PLLs to be locked
  PCI: rockchip: Write PCI Device ID to correct register
  PCI: rockchip: Assert PCI Configuration Enable bit after probe
  PCI: qcom: Disable write access to read only registers for IP v2.3.3
  PCI: Add function 1 DMA alias quirk for Marvell 88SE9235
  PCI/PM: Avoid putting EloPOS E2/S2/H2 PCIe Ports in D3cold
  dm integrity: reduce vmalloc space footprint on 32-bit architectures
  hwrng: imx-rngc - fix the timeout for init and self check
  jfs: jfs_dmap: Validate db_l2nbperpage while mounting
  ext4: only update i_reserved_data_blocks on successful block allocation
  ext4: turn quotas off if mount failed after enabling quotas
  ext4: fix to check return value of freeze_bdev() in ext4_shutdown()
  ext4: fix wrong unit use in ext4_mb_new_blocks
  ext4: get block from bh in ext4_free_blocks for fast commit replay
  ext4: fix wrong unit use in ext4_mb_clear_bb
  ext4: Fix reusing stale buffer heads from last failed mounting
  MIPS: KVM: Fix NULL pointer dereference
  MIPS: Loongson: Fix cpu_probe_loongson() again
  erofs: fix compact 4B support for 16k block size
  arm64: errata: Add detection for TRBE overwrite in FILL mode
  powerpc/security: Fix Speculation_Store_Bypass reporting on Power10
  misc: fastrpc: Create fastrpc scalar with correct buffer count
  powerpc: Fail build if using recordmcount with binutils v2.37
  mm/damon/ops-common: atomically test and clear young on ptes and pmds
  net: bcmgenet: Ensure MDIO unregistration has clocks enabled
  mtd: rawnand: meson: fix unaligned DMA buffers handling
  tpm: tpm_vtpm_proxy: fix a race condition in /dev/vtpmx creation
  pinctrl: amd: Only use special debounce behavior for GPIO 0
  pinctrl: amd: Detect and mask spurious interrupts
  pinctrl: amd: Detect internal GPIO0 debounce handling
  pinctrl: amd: Fix mistake in handling clearing pins at startup
  f2fs: fix to avoid NULL pointer dereference f2fs_write_end_io()
  fs/ntfs3: Check fields while reading
  nvme-pci: fix DMA direction of unmapping integrity data
  nvme-pci: remove nvme_queue from nvme_iod
  net/sched: sch_qfq: account for stab overhead in qfq_enqueue
  net/sched: sch_qfq: refactor parsing of netlink parameters
  net/sched: make psched_mtu() RTNL-less safe
  netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write()
  riscv: mm: fix truncation warning on RV32
  net/sched: flower: Ensure both minimum and maximum ports are specified
  bpf: cpumap: Fix memory leak in cpu_map_update_elem
  octeontx2-pf: Add additional check for MCAM rules
  wifi: airo: avoid uninitialized warning in airo_get_rate()
  drm/i915: Fix one wrong caching mode enum usage
  erofs: fix fsdax unavailability for chunk-based regular files
  riscv, bpf: Fix inconsistent JIT image generation
  erofs: decouple basic mount options from fs_context
  erofs: avoid infinite loop in z_erofs_do_read_page() when reading beyond EOF
  bpf, riscv: Support riscv jit to provide bpf_line_info
  igc: Fix inserting of empty frame for launchtime
  igc: Fix launchtime before start of cycle
  kernel/trace: Fix cleanup logic of enable_trace_eprobe
  platform/x86: wmi: Break possible infinite loop when parsing GUID
  platform/x86: wmi: move variables
  platform/x86: wmi: use guid_t and guid_equal()
  platform/x86: wmi: remove unnecessary argument
  ipv6/addrconf: fix a potential refcount underflow for idev
  NTB: ntb_tool: Add check for devm_kcalloc
  NTB: ntb_transport: fix possible memory leak while device_register() fails
  ntb: intel: Fix error handling in intel_ntb_pci_driver_init()
  NTB: amd: Fix error handling in amd_ntb_pci_driver_init()
  ntb: idt: Fix error handling in idt_pci_driver_init()
  udp6: fix udp6_ehashfn() typo
  icmp6: Fix null-ptr-deref of ip6_null_entry->rt6i_idev in icmp6_dev().
  net: prevent skb corruption on frag list segmentation
  net: bgmac: postpone turning IRQs off to avoid SoC hangs
  ionic: remove WARN_ON to prevent panic_on_warn
  gve: Set default duplex configuration to full
  net/sched: cls_fw: Fix improper refcount update leads to use-after-free
  net: mvneta: fix txq_map in case of txq_number==1
  bpf: Fix max stack depth check for async callbacks
  scsi: qla2xxx: Fix error code in qla2x00_start_sp()
  igc: Handle PPS start time programming for past time values
  igc: set TP bit in 'supported' and 'advertising' fields of ethtool_link_ksettings
  net/mlx5e: Check for NOT_READY flag state after locking
  net/mlx5e: fix memory leak in mlx5e_ptp_open
  net/mlx5e: fix double free in mlx5e_destroy_flow_table
  igc: Remove delay during TX ring configuration
  drm/panel: simple: Add Powertip PH800480T013 drm_display_mode flags
  drm/bridge: ti-sn65dsi86: Fix auxiliary bus lifetime
  drm/panel: simple: Add connector_type for innolux_at043tn24
  ksmbd: validate session id and tree id in the compound request
  ksmbd: fix out-of-bound read in smb2_write
  ksmbd: validate command payload size
  ksmbd: use ksmbd_req_buf_next() in ksmbd_smb2_check_message()
  workqueue: clean up WORK_* constant types, clarify masking
  net: lan743x: Don't sleep in atomic context
  io_uring: add reschedule point to handle_tw_list()
  io_uring: Use io_schedule* in cqring wait
  block/partition: fix signedness issue for Amiga partitions
  tty: serial: fsl_lpuart: add earlycon for imx8ulp platform
  wireguard: netlink: send staged packets when setting initial private key
  wireguard: queueing: use saner cpu selection wrapping
  netfilter: nf_tables: prevent OOB access in nft_byteorder_eval
  netfilter: nf_tables: do not ignore genmask when looking up chain by id
  netfilter: conntrack: Avoid nf_ct_helper_hash uses after free
  netfilter: nf_tables: unbind non-anonymous set if rule construction fails
  fanotify: disallow mount/sb marks on kernel internal pseudo fs
  ovl: fix null pointer dereference in ovl_get_acl_rcu()
  fs: no need to check source
  leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on dev rename
  ARM: orion5x: fix d2net gpio initialization
  ARM: dts: qcom: ipq4019: fix broken NAND controller properties override
  ASoC: mediatek: mt8173: Fix snd_soc_component_initialize error path
  ASoC: mediatek: mt8173: Fix irq error path
  btrfs: do not BUG_ON() on tree mod log failure at __btrfs_cow_block()
  btrfs: fix extent buffer leak after tree mod log failure at split_node()
  btrfs: fix race when deleting quota root from the dirty cow roots list
  btrfs: reinsert BGs failed to reclaim
  btrfs: bail out reclaim process if filesystem is read-only
  btrfs: delete unused BGs while reclaiming BGs
  btrfs: add handling for RAID1C23/DUP to btrfs_reduce_alloc_profile
  fs: avoid empty option when generating legacy mount string
  jffs2: reduce stack usage in jffs2_build_xattr_subsystem()
  ipvs: increase ip_vs_conn_tab_bits range for 64BIT
  fs: Lock moved directories
  fs: Establish locking order for unrelated directories
  Revert "f2fs: fix potential corruption when moving a directory"
  ext4: Remove ext4 locking of moved directory
  shmem: use ramfs_kill_sb() for kill_sb method of ramfs-based tmpfs
  autofs: use flexible array in ioctl structure
  integrity: Fix possible multiple allocation in integrity_inode_get()
  um: Use HOST_DIR for mrproper
  bcache: Fix __bch_btree_node_alloc to make the failure behavior consistent
  bcache: Remove unnecessary NULL point check in node allocations
  bcache: fixup btree_cache_wait list damage
  mmc: sdhci: fix DMA configure compatibility issue when 64bit DMA mode is used.
  mmc: mmci: Set PROBE_PREFER_ASYNCHRONOUS
  mmc: core: disable TRIM on Micron MTFC4GACAJCN-1M
  mmc: core: disable TRIM on Kingston EMMC04G-M627
  io_uring: wait interruptibly for request completions on exit
  NFSD: add encoding of op_recall flag for write delegation
  i2c: qup: Add missing unwind goto in qup_i2c_probe()
  btrfs: do not BUG_ON() on tree mod log failure at balance_level()
  extcon: usbc-tusb320: Convert to i2c's .probe_new()
  i2c: xiic: Don't try to handle more interrupt events after error
  i2c: xiic: Defer xiic_wakeup() and __xiic_start_xfer() in xiic_process()
  apparmor: fix missing error check for rhashtable_insert_fast
  sh: dma: Fix DMA channel offset calculation
  s390/qeth: Fix vipa deletion
  octeontx-af: fix hardware timestamp configuration
  net: dsa: tag_sja1105: fix MAC DA patching from meta frames
  pptp: Fix fib lookup calls.
  riscv: move memblock_allow_resize() after linear mapping is ready
  net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX
  xsk: Honor SO_BINDTODEVICE on bind
  tcp: annotate data races in __tcp_oow_rate_limited()
  net: bridge: keep ports without IFF_UNICAST_FLT in BR_PROMISC mode
  powerpc: allow PPC_EARLY_DEBUG_CPM only when SERIAL_CPM=y
  ntfs: Fix panic about slab-out-of-bounds caused by ntfs_listxattr()
  octeontx2-af: Add validation before accessing cgx and lmac
  octeontx2-af: Fix mapping for NIX block from CGX connection
  net/sched: act_ipt: add sanity checks on table name and hook locations
  f2fs: fix error path handling in truncate_dnode()
  mailbox: ti-msgmgr: Fill non-message tx data fields with 0x0
  spi: bcm-qspi: return error if neither hif_mspi nor mspi is available
  net: dsa: vsc73xx: fix MTU configuration
  ibmvnic: Do not reset dql stats on NON_FATAL err
  Add MODULE_FIRMWARE() for FIRMWARE_TG357766.
  sctp: fix potential deadlock on &net->sctp.addr_wq_lock
  media: cec: i2c: ch7322: also select REGMAP
  drm/i915/psr: Use hw.adjusted mode when calculating io/fast wake times
  rtc: st-lpc: Release some resources in st_rtc_probe() in case of error
  md/raid10: fix the condition to call bio_end_io_acct()
  pwm: mtk_disp: Fix the disable flow of disp_pwm
  pwm: ab8500: Fix error code in probe()
  pwm: sysfs: Do not apply state to already disabled PWMs
  pwm: imx-tpm: force 'real_period' to be zero in suspend
  phy: tegra: xusb: check return value of devm_kzalloc()
  mfd: stmpe: Only disable the regulators if they are enabled
  KVM: s390/diag: fix racy access of physical cpu number in diag 9c handler
  KVM: s390: vsie: fix the length of APCB bitmap
  mfd: stmfx: Nullify stmfx->vdd in case of error
  mfd: stmfx: Fix error path in stmfx_chip_init
  nvmem: rmem: Use NVMEM_DEVID_AUTO
  test_firmware: return ENOMEM instead of ENOSPC on failed memory allocation
  serial: 8250_omap: Use force_suspend and resume for system suspend
  Revert "usb: common: usb-conn-gpio: Set last role to unknown before initial detection"
  mfd: intel-lpss: Add missing check for platform_get_resource
  usb: dwc3-meson-g12a: Fix an error handling path in dwc3_meson_g12a_probe()
  usb: common: usb-conn-gpio: Set last role to unknown before initial detection
  usb: dwc3: qcom: Fix an error handling path in dwc3_qcom_probe()
  usb: dwc3: qcom: Release the correct resources in dwc3_qcom_remove()
  KVM: s390: fix KVM_S390_GET_CMMA_BITS for GFNs in memslot holes
  media: atomisp: gmin_platform: fix out_len in gmin_get_config_dsm_var()
  media: venus: helpers: Fix ALIGN() of non power of two
  mfd: rt5033: Drop rt5033-battery sub-device
  coresight: Fix loss of connection info when a module is unloaded
  kernfs: fix missing kernfs_idr_lock to remove an ID from the IDR
  serial: 8250: lock port for UART_IER access in omap8250_irq()
  serial: 8250: lock port for stop_rx() in omap8250_irq()
  usb: hide unused usbfs_notify_suspend/resume functions
  usb: phy: phy-tahvo: fix memory leak in tahvo_usb_probe()
  extcon: Fix kernel doc of property capability fields to avoid warnings
  extcon: Fix kernel doc of property fields to avoid warnings
  usb: gadget: u_serial: Add null pointer check in gserial_suspend
  usb: dwc3: qcom: Fix potential memory leak
  clk: qcom: ipq6018: fix networking resets
  clk: qcom: reset: support resetting multiple bits
  clk: qcom: reset: Allow specifying custom reset delay
  media: i2c: Correct format propagation for st-mipid02
  media: usb: siano: Fix warning due to null work_func_t function pointer
  media: videodev2.h: Fix struct v4l2_input tuner index comment
  media: usb: Check az6007_read() return value
  clk: qcom: gcc-ipq6018: Use floor ops for sdcc clocks
  clk: qcom: camcc-sc7180: Add parent dependency to all camera GDSCs
  serial: 8250: omap: Fix freeing of resources on failed register
  usb: dwc2: Fix some error handling paths
  usb: dwc2: platform: Improve error reporting for problems during .remove()
  sh: j2: Use ioremap() to translate device tree address into kernel memory
  w1: fix loop in w1_fini()
  w1: w1_therm: fix locking behavior in convert_t
  SUNRPC: Fix UAF in svc_tcp_listen_data_ready()
  block: increment diskseq on all media change events
  block: change all __u32 annotations to __be32 in affs_hardblocks.h
  block: add overflow checks for Amiga partition support
  block: fix signed int overflow in Amiga partition support
  ALSA: jack: Fix mutex call in snd_jack_report()
  ALSA: hda/realtek: Add quirk for Clevo NPx0SNx
  iio: accel: fxls8962af: fixup buffer scan element type
  iio: accel: fxls8962af: errata bug only applicable for FXLS8962AF
  iio: adc: ad7192: Fix internal/external clock selection
  iio: adc: ad7192: Fix null ad7192_state pointer access
  io_uring: ensure IOPOLL locks around deferred work
  phy: tegra: xusb: Clear the driver reference in usb-phy dev
  bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page
  usb: dwc3: gadget: Propagate core init errors to UDC during pullup
  ACPI: utils: Fix acpi_evaluate_dsm_typed() redefinition error
  USB: serial: option: add LARA-R6 01B PIDs
  ksmbd: avoid field overflow warning
  efi/libstub: Disable PCI DMA before grabbing the EFI memory map
  kbuild: Disable GCOV for *.mod.o
  hwrng: st - keep clock enabled while hwrng is registered
  dax/kmem: Pass valid argument to memory_group_register_static
  dax: Introduce alloc_dev_dax_id()
  dax: Fix dax_mapping_release() use after free
  SMB3: Do not send lease break acknowledgment if all file handles have been closed
  NFSv4.1: freeze the session table upon receiving NFS4ERR_BADSESSION
  crypto: qat - unmap buffers before free for RSA
  crypto: qat - unmap buffer before free for DH
  crypto: qat - Use helper to set reqsize
  crypto: kpp - Add helper to set reqsize
  crypto: qat - use reference to structure in dma_map_single()
  crypto: qat - replace get_current_node() with numa_node_id()
  crypto: qat - honor CRYPTO_TFM_REQ_MAY_SLEEP flag
  ARC: define ASM_NL and __ALIGN(_STR) outside #ifdef __ASSEMBLY__ guard
  modpost: fix off by one in is_executable_section()
  crypto: marvell/cesa - Fix type mismatch warning
  modpost: fix section mismatch message for R_ARM_{PC24,CALL,JUMP24}
  modpost: fix section mismatch message for R_ARM_ABS32
  crypto: nx - fix build warnings when DEBUG_FS is not enabled
  modpost: remove broken calculation of exception_table_entry size
  hwrng: virtio - Fix race on data_avail and actual data
  hwrng: virtio - always add a pending request
  hwrng: virtio - don't waste entropy
  hwrng: virtio - don't wait on cleanup
  hwrng: virtio - add an internal buffer
  powerpc/mm/dax: Fix the condition when checking if altmap vmemap can cross-boundary
  powerpc: update ppc_save_regs to save current r1 in pt_regs
  powerpc/book3s64/mm: Fix DirectMap stats in /proc/meminfo
  powerpc: simplify ppc_save_regs
  riscv: uprobes: Restore thread.bad_cause
  powerpc/powernv/sriov: perform null check on iov before dereferencing iov
  pinctrl: at91-pio4: check return value of devm_kasprintf()
  pinctrl: microchip-sgpio: check return value of devm_kasprintf()
  powerpc/64s: Fix VAS mm use after free
  perf dwarf-aux: Fix off-by-one in die_get_varname()
  perf script: Fix allocation of evsel->priv related to per-event dump files
  powerpc/signal32: Force inlining of __unsafe_save_user_regs() and save_tm_user_regs_unsafe()
  powerpc/interrupt: Don't read MSR from interrupt_exit_kernel_prepare()
  kcsan: Don't expect 64 bits atomic builtins from 32 bits architectures
  pinctrl: cherryview: Return correct value if pin in push-pull mode
  perf bench: Add missing setlocale() call to allow usage of %'d style formatting
  perf bench: Use unbuffered output when pipe/tee'ing to a file
  PCI: Add pci_clear_master() stub for non-CONFIG_PCI
  PCI: ftpci100: Release the clock resources
  PCI: pciehp: Cancel bringup sequence if card is not present
  scsi: 3w-xxxx: Add error handling for initialization failure in tw_probe()
  PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-free
  pinctrl: bcm2835: Handle gpiochip_add_pin_range() errors
  scsi: qedf: Fix NULL dereference in error handling
  PCI: vmd: Reset VMD config register between soft reboots
  PCI: cadence: Fix Gen2 Link Retraining process
  clk: Fix memory leak in devm_clk_notifier_register()
  ASoC: imx-audmix: check return value of devm_kasprintf()
  ovl: update of dentry revalidate flags after copy up
  drivers: meson: secure-pwrc: always enable DMA domain
  clk: ti: clkctrl: check return value of kasprintf()
  clk: keystone: sci-clk: check return value of kasprintf()
  clk: si5341: free unused memory on probe failure
  clk: si5341: check return value of {devm_}kasprintf()
  clk: si5341: return error if one synth clock registration fails
  clk: cdce925: check return value of kasprintf()
  clk: vc5: check memory returned by kasprintf()
  drm/msm/dpu: correct MERGE_3D length
  arm64: dts: mediatek: mt8192: Fix CPUs capacity-dmips-mhz
  arm64: dts: mediatek: Add cpufreq nodes for MT8192
  drm/msm/dp: Free resources after unregistering them
  drm/msm/dpu: do not enable color-management if DSPPs are not available
  ALSA: ac97: Fix possible NULL dereference in snd_ac97_mixer
  clk: tegra: tegra124-emc: Fix potential memory leak
  clk: imx: clk-imx8mp: improve error handling in imx8mp_clocks_probe()
  clk: clocking-wizard: Fix Oops in clk_wzrd_register_divider()
  clk: imx: clk-imx8mn: fix memory leak in imx8mn_clocks_probe
  arm64: dts: qcom: sm8250-edo: Panel framebuffer is 2.5k instead of 4k
  RDMA/bnxt_re: Avoid calling wake_up threads from spin_lock context
  RDMA/bnxt_re: wraparound mbox producer index
  drm/msm/a5xx: really check for A510 in a5xx_gpu_init
  amdgpu: validate offset_in_bo of drm_amdgpu_gem_va
  drm/radeon: fix possible division-by-zero errors
  drm/amd/display: Fix artifacting on eDP panels when engaging freesync video mode
  drm/amdkfd: Fix potential deallocation of previously deallocated memory.
  ARM: dts: BCM5301X: fix duplex-full => full-duplex
  hwmon: (pmbus/adm1275) Fix problems with temperature monitoring on ADM1272
  hwmon: (adm1275) Allow setting sample averaging
  hwmon: (gsc-hwmon) fix fan pwm temperature scaling
  ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx
  ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2
  arm64: dts: ti: k3-j7200: Fix physical address of pin
  fbdev: omapfb: lcd_mipid: Fix an error handling path in mipid_spi_probe()
  arm64: dts: renesas: ulcb-kf: Remove flow control for SCIF1
  ARM: dts: iwg20d-q7-common: Fix backlight pwm specifier
  RDMA/hns: Fix hns_roce_table_get return value
  IB/hfi1: Fix wrong mmu_node used for user SDMA packet after invalidate
  IB/hfi1: Use bitmap_zalloc() when applicable
  RDMA/irdma: avoid fortify-string warning in irdma_clr_wqes
  soc/fsl/qe: fix usb.c build errors
  ARM: dts: meson8: correct uart_B and uart_C clock references
  ASoC: es8316: Do not set rate constraints for unsupported MCLKs
  ASoC: es8316: Increment max value for ALC Capture Target Volume control
  memory: brcmstb_dpfe: fix testing array offset after use
  ARM: dts: stm32: Shorten the AV96 HDMI sound card name
  arm64: dts: mediatek: mt8183: Add mediatek,broken-save-restore-fw to kukui
  arm64: dts: qcom: apq8096: fix fixed regulator name property
  ARM: omap2: fix missing tick_broadcast() prototype
  ARM: ep93xx: fix missing-prototype warnings
  drm/panel: simple: fix active size for Ampire AM-480272H3TMQW-T01H
  arm64: dts: qcom: apq8016-sbc: Fix 1.8V power rail on LS expansion
  arm64: dts: qcom: apq8016-sbc: Fix regulator constraints
  arm64: dts: qcom: Drop unneeded extra device-specific includes
  arm64: dts: qcom: apq8016-sbc: fix mpps state names
  arm64: dts: qcom: apq8016-sbc: Clarify firmware-names
  arm64: dts: qcom: apq8016-sbc: Update modem and WiFi firmware path
  arm64: dts: qcom: db820c: Move blsp1_uart2 pin states to msm8996.dtsi
  ARM: dts: gta04: Move model property out of pinctrl node
  arm64: dts: qcom: sdm845: correct camss unit address
  drm/msm/dpu: Set DPU_DATA_HCTL_EN for in INTF_SC7180_MASK
  arm64: dts: qcom: sdm630: correct camss unit address
  drm/msm/disp/dpu: get timing engine status from intf status register
  arm64: dts: qcom: msm8996: correct camss unit address
  arm64: dts: qcom: msm8994: correct SPMI unit address
  arm64: dts: qcom: msm8916: correct camss unit address
  drm/msm/dsi: don't allow enabling 14nm VCO with unprogrammed rate
  RDMA/bnxt_re: Fix to remove an unnecessary log
  RDMA/bnxt_re: Remove a redundant check inside bnxt_re_update_gid
  RDMA/bnxt_re: Use unique names while registering interrupts
  RDMA/bnxt_re: Fix to remove unnecessary return labels
  RDMA/bnxt_re: Disable/kill tasklet only if it is enabled
  clk: imx: scu: use _safe list iterator to avoid a use after free
  arm64: dts: microchip: sparx5: do not use PSCI on reference boards
  bus: ti-sysc: Fix dispc quirk masking bool variables
  ARM: dts: stm32: Move ethernet MAC EEPROM from SoM to carrier boards
  drm/panel: sharp-ls043t1le01: adjust mode settings
  drm: sun4i_tcon: use devm_clk_get_enabled in `sun4i_tcon_init_clocks`
  Input: adxl34x - do not hardcode interrupt trigger type
  ARM: dts: meson8b: correct uart_B and uart_C clock references
  ARM: dts: BCM5301X: Drop "clock-names" from the SPI node
  drm/vram-helper: fix function names in vram helper doc
  drm/bridge: tc358768: fix THS_TRAILCNT computation
  drm/bridge: tc358768: fix TXTAGOCNT computation
  drm/bridge: tc358768: fix THS_ZEROCNT computation
  drm/bridge: tc358768: fix TCLK_TRAILCNT computation
  drm/bridge: tc358768: Add atomic_get_input_bus_fmts() implementation
  Input: drv260x - sleep between polling GO bit
  drm/bridge: tc358768: fix TCLK_ZEROCNT computation
  drm/amd/display: Explicitly specify update type per plane info change
  drm/bridge: tc358768: fix PLL target frequency
  radeon: avoid double free in ci_dpm_init()
  drm/bridge: tc358768: fix PLL parameters computation
  drm/amd/display: Add logging for display MALL refresh setting
  drm/bridge: tc358768: always enable HS video mode
  netlink: Add __sock_i_ino() for __netlink_diag_dump().
  ipvlan: Fix return value of ipvlan_queue_xmit()
  netfilter: nf_conntrack_sip: fix the ct_sip_parse_numerical_param() return value.
  netfilter: conntrack: dccp: copy entire header to stack buffer, not just basic one
  lib/ts_bm: reset initial match offset for every block of text
  net: nfc: Fix use-after-free caused by nfc_llcp_find_local
  nfc: llcp: simplify llcp_sock_connect() error paths
  sfc: fix crash when reading stats while NIC is resetting
  net: axienet: Move reset before 64-bit DMA detection
  gtp: Fix use-after-free in __gtp_encap_destroy().
  selftests: rtnetlink: remove netdevsim device after ipsec offload test
  bonding: do not assume skb mac_header is set
  netlink: do not hard code device address lenth in fdb dumps
  netlink: fix potential deadlock in netlink_set_err()
  wifi: ath9k: convert msecs to jiffies where needed
  net: stmmac: fix double serdes powerdown
  igc: Fix race condition in PTP tx code
  can: length: fix bitstuffing count
  bpf: Fix bpf socket lookup from tc/xdp to respect socket VRF bindings
  bpf: Call __bpf_sk_lookup()/__bpf_skc_lookup() directly via TC hookpoint
  bpf: Factor out socket lookup functions for the TC hookpoint.
  bpf: Omit superfluous address family check in __bpf_skc_lookup
  wifi: cfg80211: rewrite merging of inherited elements
  wifi: iwlwifi: pcie: fix NULL pointer dereference in iwl_pcie_irq_rx_msix_handler()
  rtnetlink: extend RTEXT_FILTER_SKIP_STATS to IFLA_VF_INFO
  wifi: iwlwifi: mvm: indicate HW decrypt for beacon protection
  iwlwifi: don't dump_stack() when we get an unexpected interrupt
  wifi: ath9k: Fix possible stall on ath9k_txq_list_has_key()
  wifi: iwlwifi: pull from TXQs with softirqs disabled
  memstick r592: make memstick_debug_get_tpc_name() static
  kexec: fix a memory leak in crash_shrink_memory()
  watchdog/perf: more properly prevent false positives with turbo modes
  watchdog/perf: define dummy watchdog_update_hrtimer_threshold() on correct config
  wifi: rsi: Do not set MMC_PM_KEEP_POWER in shutdown
  wifi: rsi: Do not configure WoWlan in shutdown hook if not enabled
  selftests/bpf: Fix check_mtu using wrong variable type
  wifi: ath9k: don't allow to overwrite ENDPOINT0 attributes
  wifi: ray_cs: Fix an error handling path in ray_probe()
  wifi: ray_cs: Drop useless status variable in parse_addr()
  wifi: ray_cs: Utilize strnlen() in parse_addr()
  wifi: wl3501_cs: Fix an error handling path in wl3501_probe()
  wl3501_cs: use eth_hw_addr_set()
  wifi: atmel: Fix an error handling path in atmel_probe()
  wifi: orinoco: Fix an error handling path in orinoco_cs_probe()
  wifi: orinoco: Fix an error handling path in spectrum_cs_probe()
  regulator: core: Streamline debugfs operations
  regulator: core: Fix more error checking for debugfs_create_dir()
  bpftool: JIT limited misreported as negative value on aarch64
  nfc: llcp: fix possible use of uninitialized variable in nfc_llcp_send_connect()
  spi: dw: Round of n_bytes to power of 2
  bpf: Don't EFAULT for {g,s}setsockopt with wrong optlen
  libbpf: fix offsetof() and container_of() to work with CO-RE
  sctp: add bpf_bypass_getsockopt proto callback
  wifi: mwifiex: Fix the size of a memory allocation in mwifiex_ret_802_11_scan()
  wifi: wilc1000: fix for absent RSN capabilities WFA testcase
  spi: spi-geni-qcom: Correct CS_TOGGLE bit in SPI_TRANS_CFG
  samples/bpf: Fix buffer overflow in tcp_basertt
  libbpf: btf_dump_type_data_check_overflow needs to consider BTF_MEMBER_BITFIELD_SIZE
  pstore/ram: Add check for kstrdup
  wifi: ath9k: avoid referencing uninit memory in ath9k_wmi_ctrl_rx
  ima: Fix build warnings
  wifi: ath9k: fix AR9003 mac hardware hang check register offset calculation
  evm: Fix build warnings
  igc: Enable and fix RX hash usage by netstack
  evm: Complete description of evm_inode_setattr()
  locking/atomic: arm: fix sync ops
  x86/mm: Fix __swp_entry_to_pte() for Xen PV guests
  perf/ibs: Fix interface via core pmu events
  kselftest: vDSO: Fix accumulation of uninitialized ret when CLOCK_REALTIME is undefined
  rcu/rcuscale: Stop kfree_scale_thread thread(s) after unloading rcuscale
  rcu/rcuscale: Move rcu_scale_*() after kfree_scale_cleanup()
  rcuscale: Move shutdown from wait_event() to wait_event_idle()
  rcuscale: Always log error message
  rcutorture: Correct name of use_softirq module parameter
  thermal/drivers/sun8i: Fix some error handling paths in sun8i_ths_probe()
  cpufreq: intel_pstate: Fix energy_performance_preference for passive
  ARM: 9303/1: kprobes: avoid missing-declaration warnings
  powercap: RAPL: Fix CONFIG_IOSF_MBI dependency
  perf/arm-cmn: Fix DTC reset
  PM: domains: fix integer overflow issues in genpd_parse_state()
  clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probe
  tracing/timer: Add missing hrtimer modes to decode_hrtimer_mode().
  posix-timers: Prevent RT livelock in itimer_delete()
  svcrdma: Prevent page release when nothing was received
  irqchip/jcore-aic: Fix missing allocation of IRQ descriptors
  md/raid10: fix io loss while replacement replace rdev
  md/raid10: fix null-ptr-deref of mreplace in raid10_sync_request
  md/raid10: fix wrong setting of max_corr_read_errors
  md/raid10: fix overflow of md/safe_mode_delay
  md/raid10: check slab-out-of-bounds in md_bitmap_get_counter
  blk-iocost: use spin_lock_irqsave in adjust_inuse_and_calc_cost
  x86/resctrl: Only show tasks' pid in current pid namespace
  fs: pipe: reveal missing function protoypes
  netfilter: nf_tables: drop map element references from preparation phase
  Revert "mptcp: fix possible divide by zero in recvmsg()"
  Linux 5.15.120
  nubus: Partially revert proc_create_single_data() conversion
  parisc: Delete redundant register definitions in <asm/assembly.h>
  drm/amdgpu: Validate VM ioctl flags.
  scripts/tags.sh: Resolve gtags empty index generation
  perf symbols: Symbol lookup with kcore can fail if multiple segments match stext
  Revert "thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe"
  HID: logitech-hidpp: add HIDPP_QUIRK_DELAYED_INIT for the T651.
  HID: wacom: Use ktime_t rather than int when dealing with timestamps
  bpf: ensure main program has an extable
  can: isotp: isotp_sendmsg(): fix return error fix on TX path
  x86/smp: Use dedicated cache-line for mwait_play_dead()
  x86/microcode/AMD: Load late on both threads too
  drm/amdgpu: Set vmbo destroy after pt bo is created
  mm, hwpoison: when copy-on-write hits poison, take page offline
  mm, hwpoison: try to recover from copy-on write faults
  mptcp: consolidate fallback and non fallback state machine
  mptcp: fix possible divide by zero in recvmsg()

Upstream-Build: ks_qcom-android13-5.15-keystone-qcom-release@11022424 TKQ2.231030.001
Change-Id: Id1a87e15498ba964e095d6133465f505487682a0
Signed-off-by: Sivasri Kumar, Vanka <quic_svanka@quicinc.com>
This commit is contained in:
Sivasri Kumar, Vanka
2023-11-02 15:32:49 +05:30
parent 4ddd003be1 13f75060c9
commit f13983fd7f
704 changed files with 10613 additions and 8963 deletions
Download Patch File Download Diff File Expand all files Collapse all files

30
Documentation/ABI/testing/sysfs-fs-f2fs
View File

@@ -580,3 +580,33 @@ Date: January 2022
Contact: "Jaegeuk Kim" <jaegeuk@kernel.org>
Description: Controls max # of node block writes to be used for roll forward
recovery. This can limit the roll forward recovery time.
What: /sys/fs/f2fs/<disk>/unusable_blocks_per_sec
Date: June 2022
Contact: "Jaegeuk Kim" <jaegeuk@kernel.org>
Description: Shows the number of unusable blocks in a section which was defined by
the zone capacity reported by underlying zoned device.
What: /sys/fs/f2fs/<disk>/current_atomic_write
Date: July 2022
Contact: "Daeho Jeong" <daehojeong@google.com>
Description: Show the total current atomic write block count, which is not committed yet.
This is a read-only entry.
What: /sys/fs/f2fs/<disk>/peak_atomic_write
Date: July 2022
Contact: "Daeho Jeong" <daehojeong@google.com>
Description: Show the peak value of total current atomic write block count after boot.
If you write "0" here, you can initialize to "0".
What: /sys/fs/f2fs/<disk>/committed_atomic_block
Date: July 2022
Contact: "Daeho Jeong" <daehojeong@google.com>
Description: Show the accumulated total committed atomic write block count after boot.
If you write "0" here, you can initialize to "0".
What: /sys/fs/f2fs/<disk>/revoked_atomic_block
Date: July 2022
Contact: "Daeho Jeong" <daehojeong@google.com>
Description: Show the accumulated total revoked atomic write block count after boot.
If you write "0" here, you can initialize to "0".

8
Documentation/admin-guide/device-mapper/dm-init.rst
View File

@@ -123,3 +123,11 @@ Other examples (per target):
0 1638400 verity 1 8:1 8:2 4096 4096 204800 1 sha256
fb1a5a0f00deb908d8b53cb270858975e76cf64105d412ce764225d53b8f3cfd
51934789604d1b92399c52e7cb149d1b3a1b74bbbcb103b2a0aaacbed5c08584
For setups using device-mapper on top of asynchronously probed block
devices (MMC, USB, ..), it may be necessary to tell dm-init to
explicitly wait for them to become available before setting up the
device-mapper tables. This can be done with the "dm-mod.waitfor="
module parameter, which takes a list of devices to wait for::
dm-mod.waitfor=<device1>[,..,<deviceN>]

2
Documentation/filesystems/autofs-mount-control.rst
View File

@@ -196,7 +196,7 @@ information and return operation results::
struct args_ismountpoint ismountpoint;
};
char path[0];
char path[];
};
The ioctlfd field is a mount point file descriptor of an autofs mount

2
Documentation/filesystems/autofs.rst
View File

@@ -467,7 +467,7 @@ Each ioctl is passed a pointer to an `autofs_dev_ioctl` structure::
struct args_ismountpoint ismountpoint;
};
char path[0];
char path[];
};
For the **OPEN_MOUNT** and **IS_MOUNTPOINT** commands, the target

26
Documentation/filesystems/directory-locking.rst
View File

@@ -22,12 +22,11 @@ exclusive.
3) object removal. Locking rules: caller locks parent, finds victim,
locks victim and calls the method. Locks are exclusive.
4) rename() that is _not_ cross-directory. Locking rules: caller locks
the parent and finds source and target. In case of exchange (with
RENAME_EXCHANGE in flags argument) lock both. In any case,
if the target already exists, lock it. If the source is a non-directory,
lock it. If we need to lock both, lock them in inode pointer order.
Then call the method. All locks are exclusive.
4) rename() that is _not_ cross-directory. Locking rules: caller locks the
parent and finds source and target. We lock both (provided they exist). If we
need to lock two inodes of different type (dir vs non-dir), we lock directory
first. If we need to lock two inodes of the same type, lock them in inode
pointer order. Then call the method. All locks are exclusive.
NB: we might get away with locking the source (and target in exchange
case) shared.
@@ -44,15 +43,17 @@ All locks are exclusive.
rules:
* lock the filesystem
* lock parents in "ancestors first" order.
* lock parents in "ancestors first" order. If one is not ancestor of
the other, lock them in inode pointer order.
* find source and target.
* if old parent is equal to or is a descendent of target
fail with -ENOTEMPTY
* if new parent is equal to or is a descendent of source
fail with -ELOOP
* If it's an exchange, lock both the source and the target.
* If the target exists, lock it. If the source is a non-directory,
lock it. If we need to lock both, do so in inode pointer order.
* Lock both the source and the target provided they exist. If we
need to lock two inodes of different type (dir vs non-dir), we lock
the directory first. If we need to lock two inodes of the same type,
lock them in inode pointer order.
* call the method.
All ->i_rwsem are taken exclusive. Again, we might get away with locking
@@ -66,8 +67,9 @@ If no directory is its own ancestor, the scheme above is deadlock-free.
Proof:
First of all, at any moment we have a partial ordering of the
objects - A < B iff A is an ancestor of B.
First of all, at any moment we have a linear ordering of the
objects - A < B iff (A is an ancestor of B) or (B is not an ancestor
of A and ptr(A) < ptr(B)).
That ordering can change. However, the following is true:

9
Documentation/networking/af_xdp.rst
View File

@@ -433,6 +433,15 @@ start N bytes into the buffer leaving the first N bytes for the
application to use. The final option is the flags field, but it will
be dealt with in separate sections for each UMEM flag.
SO_BINDTODEVICE setsockopt
--------------------------
This is a generic SOL_SOCKET option that can be used to tie AF_XDP
socket to a particular network interface. It is useful when a socket
is created by a privileged process and passed to a non-privileged one.
Once the option is set, kernel will refuse attempts to bind that socket
to a different interface. Updating the value requires CAP_NET_RAW.
XDP_STATISTICS getsockopt
-------------------------

2
Makefile
View File

@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 5
PATCHLEVEL = 15
SUBLEVEL = 119
SUBLEVEL = 123
EXTRAVERSION =
NAME = Trick or Treat

4
android/ACK_SHA
View File

@@ -1,2 +1,2 @@
965abef6ee9f04a9eacb708b5562affa92869f5b
android13-5.15-2023-09_r1
39606e3309fcaf2b26047f43a26ad93521a1fa40
android13-5.15-2023-10_r1

3869
android/abi_gki_aarch64.xml
View File

File diff suppressed because it is too large Load Diff

10
android/abi_gki_aarch64_amlogic
View File

@@ -162,6 +162,7 @@
clk_register
clk_register_composite
clk_round_rate
clk_set_max_rate
clk_set_min_rate
clk_set_parent
clk_set_rate
@@ -1023,6 +1024,7 @@
kill_block_super
kill_fasync
kill_pid
kimage_vaddr
kimage_voffset
__kmalloc
kmalloc_caches
@@ -1082,6 +1084,7 @@
led_trigger_unregister_simple
__list_add_valid
__list_del_entry_valid
list_sort
ll_rw_block
load_nls
load_nls_default
@@ -1902,6 +1905,7 @@
syscon_node_to_regmap
syscon_regmap_lookup_by_phandle
sysctl_sched_latency
sysfs_create_bin_file
sysfs_create_file_ns
sysfs_create_group
sysfs_create_link
@@ -1949,6 +1953,7 @@
__traceiter_android_rvh_check_preempt_tick
__traceiter_android_rvh_check_preempt_wakeup
__traceiter_android_rvh_do_sea
__traceiter_android_rvh_do_undefinstr
__traceiter_android_rvh_enqueue_task
__traceiter_android_rvh_gic_v3_set_affinity
__traceiter_android_rvh_iommu_setup_dma_ops
@@ -1972,6 +1977,8 @@
__traceiter_android_vh_mmc_sd_update_dataline_timing
__traceiter_android_vh_rmqueue
__traceiter_android_vh_sched_show_task
__traceiter_android_vh_set_module_permit_after_init
__traceiter_android_vh_xhci_urb_suitable_bypass
__traceiter_gpu_mem_total
__traceiter_irq_handler_entry
__traceiter_irq_handler_exit
@@ -1985,6 +1992,7 @@
__tracepoint_android_rvh_check_preempt_tick
__tracepoint_android_rvh_check_preempt_wakeup
__tracepoint_android_rvh_do_sea
__tracepoint_android_rvh_do_undefinstr
__tracepoint_android_rvh_enqueue_task
__tracepoint_android_rvh_gic_v3_set_affinity
__tracepoint_android_rvh_iommu_setup_dma_ops
@@ -2008,6 +2016,8 @@
__tracepoint_android_vh_mmc_sd_update_dataline_timing
__tracepoint_android_vh_rmqueue
__tracepoint_android_vh_sched_show_task
__tracepoint_android_vh_set_module_permit_after_init
__tracepoint_android_vh_xhci_urb_suitable_bypass
__tracepoint_gpu_mem_total
__tracepoint_irq_handler_entry
__tracepoint_irq_handler_exit

4
android/abi_gki_aarch64_mtk
View File

@@ -794,6 +794,7 @@
fwnode_property_read_string
fwnode_property_read_u32_array
fwnode_property_read_u64_array
fwnode_typec_mux_get
g_audio_cleanup
g_audio_setup
gcd
@@ -2191,10 +2192,13 @@
tty_unregister_ldisc
tty_write_room
typec_mux_get_drvdata
typec_mux_put
typec_mux_register
typec_mux_set
typec_mux_unregister
typec_partner_set_identity
typec_partner_set_pd_revision
typec_partner_set_svdm_version
typec_register_partner
typec_register_port
typec_set_data_role

4
android/abi_gki_aarch64_oplus
View File

@@ -434,6 +434,7 @@
__traceiter_android_vh_madvise_cold_or_pageout_abort
__traceiter_android_vh_mark_page_accessed
__traceiter_android_vh_mem_cgroup_alloc
__traceiter_android_vh_adjust_alloc_flags
__traceiter_android_vh_mem_cgroup_css_offline
__traceiter_android_vh_mem_cgroup_css_online
__traceiter_android_vh_mem_cgroup_free
@@ -453,6 +454,7 @@
__traceiter_android_vh_print_slabinfo_header
__traceiter_android_vh_record_mutex_lock_starttime
__traceiter_android_vh_record_pcpu_rwsem_starttime
__traceiter_android_vh_percpu_rwsem_wq_add
__traceiter_android_vh_record_rtmutex_lock_starttime
__traceiter_android_vh_record_rwsem_lock_starttime
__traceiter_android_vh_rmqueue
@@ -561,6 +563,7 @@
__tracepoint_android_vh_madvise_cold_or_pageout_abort
__tracepoint_android_vh_mark_page_accessed
__tracepoint_android_vh_mem_cgroup_alloc
__tracepoint_android_vh_adjust_alloc_flags
__tracepoint_android_vh_mem_cgroup_css_offline
__tracepoint_android_vh_mem_cgroup_css_online
__tracepoint_android_vh_mem_cgroup_free
@@ -580,6 +583,7 @@
__tracepoint_android_vh_print_slabinfo_header
__tracepoint_android_vh_record_mutex_lock_starttime
__tracepoint_android_vh_record_pcpu_rwsem_starttime
__tracepoint_android_vh_percpu_rwsem_wq_add
__tracepoint_android_vh_record_rtmutex_lock_starttime
__tracepoint_android_vh_record_rwsem_lock_starttime
__tracepoint_android_vh_rmqueue

1
android/abi_gki_aarch64_qcom
View File

@@ -2498,6 +2498,7 @@
typec_set_pwr_opmode
typec_set_pwr_role
typec_unregister_partner
typec_get_orientation
uart_add_one_port
uart_get_baud_rate
uart_insert_char

8
arch/arc/include/asm/linkage.h
View File

@@ -8,6 +8,10 @@
#include <asm/dwarf.h>
#define ASM_NL ` /* use '`' to mark new line in macro */
#define __ALIGN .align 4
#define __ALIGN_STR __stringify(__ALIGN)
#ifdef __ASSEMBLY__
.macro ST2 e, o, off
@@ -28,10 +32,6 @@
#endif
.endm
#define ASM_NL ` /* use '`' to mark new line in macro */
#define __ALIGN .align 4
#define __ALIGN_STR __stringify(__ALIGN)
/* annotation for data we want in DCCM - if enabled in .config */
.macro ARCFP_DATA nm
#ifdef CONFIG_ARC_HAS_DCCM

2
arch/arm/boot/dts/bcm53015-meraki-mr26.dts
View File

@@ -128,7 +128,7 @@
fixed-link {
speed = <1000>;
duplex-full;
full-duplex;
};
};
};

2
arch/arm/boot/dts/bcm53016-meraki-mr32.dts
View File

@@ -212,7 +212,7 @@
fixed-link {
speed = <1000>;
duplex-full;
full-duplex;
};
};
};

1
arch/arm/boot/dts/bcm5301x.dtsi
View File

@@ -542,7 +542,6 @@
"spi_lr_session_done",
"spi_lr_overread";
clocks = <&iprocmed>;
clock-names = "iprocmed";
num-cs = <2>;
#address-cells = <1>;
#size-cells = <0>;

2
arch/arm/boot/dts/iwg20d-q7-common.dtsi
View File

@@ -49,7 +49,7 @@
lcd_backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm3 0 5000000 0>;
pwms = <&pwm3 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;

4
arch/arm/boot/dts/meson8.dtsi
View File

@@ -749,13 +749,13 @@
&uart_B {
compatible = "amlogic,meson8-uart";
clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
clock-names = "xtal", "pclk", "baud";
};
&uart_C {
compatible = "amlogic,meson8-uart";
clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
clock-names = "xtal", "pclk", "baud";
};

4
arch/arm/boot/dts/meson8b.dtsi
View File

@@ -737,13 +737,13 @@
&uart_B {
compatible = "amlogic,meson8b-uart";
clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
clock-names = "xtal", "pclk", "baud";
};
&uart_C {
compatible = "amlogic,meson8b-uart";
clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
clock-names = "xtal", "pclk", "baud";
};

4
arch/arm/boot/dts/omap3-gta04a5one.dts
View File

@@ -5,9 +5,11 @@
#include "omap3-gta04a5.dts"
&omap3_pmx_core {
/ {
model = "Goldelico GTA04A5/Letux 2804 with OneNAND";
};
&omap3_pmx_core {
gpmc_pins: pinmux_gpmc_pins {
pinctrl-single,pins = <

6
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
View File

@@ -11,9 +11,9 @@
dma@7984000 {
status = "okay";
};
};
};
qpic-nand@79b0000 {
&nand {
status = "okay";
};
};
};

6
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
View File

@@ -102,10 +102,10 @@
status = "okay";
perst-gpio = <&tlmm 38 0x1>;
};
};
};
qpic-nand@79b0000 {
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
};
};
};

6
arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
View File

@@ -65,11 +65,11 @@
dma@7984000 {
status = "okay";
};
};
};
qpic-nand@79b0000 {
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
};
};
};

11
arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
View File

@@ -137,10 +137,13 @@
sound {
compatible = "audio-graph-card";
routing =
"MIC_IN", "Capture",
"Capture", "Mic Bias",
"Playback", "HP_OUT";
widgets = "Headphone", "Headphone Jack",
"Line", "Line In Jack",
"Microphone", "Microphone Jack";
routing = "Headphone Jack", "HP_OUT",
"LINE_IN", "Line In Jack",
"MIC_IN", "Microphone Jack",
"Microphone Jack", "Mic Bias";
dais = <&sai2a_port &sai2b_port>;
status = "okay";
};

8
arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
View File

@@ -88,7 +88,7 @@
sound {
compatible = "audio-graph-card";
label = "STM32MP1-AV96-HDMI";
label = "STM32-AV96-HDMI";
dais = <&sai2a_port>;
status = "okay";
};
@@ -267,6 +267,12 @@
};
};
};
dh_mac_eeprom: eeprom@53 {
compatible = "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
};
};
&ltdc {

6
arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
View File

@@ -171,12 +171,6 @@
status = "disabled";
};
};
eeprom@53 {
compatible = "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
};
};
&iwdg2 {

2
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
View File

@@ -438,7 +438,7 @@
i2s2_port: port {
i2s2_endpoint: endpoint {
remote-endpoint = <&sii9022_tx_endpoint>;
format = "i2s";
dai-format = "i2s";
mclk-fs = <256>;
};
};

17
arch/arm/include/asm/assembler.h
View File

@@ -326,6 +326,23 @@
#endif
.endm
/*
* Raw SMP data memory barrier
*/
.macro __smp_dmb mode
#if __LINUX_ARM_ARCH__ >= 7
.ifeqs "\mode","arm"
dmb ish
.else
W(dmb) ish
.endif
#elif __LINUX_ARM_ARCH__ == 6
mcr p15, 0, r0, c7, c10, 5 @ dmb
#else
.error "Incompatible SMP platform"
#endif
.endm
#if defined(CONFIG_CPU_V7M)
/*
* setmode is used to assert to be in svc mode during boot. For v7-M

29
arch/arm/include/asm/sync_bitops.h
View File

@@ -14,14 +14,35 @@
* ops which are SMP safe even on a UP kernel.
*/
/*
* Unordered
*/
#define sync_set_bit(nr, p) _set_bit(nr, p)
#define sync_clear_bit(nr, p) _clear_bit(nr, p)
#define sync_change_bit(nr, p) _change_bit(nr, p)
#define sync_test_and_set_bit(nr, p) _test_and_set_bit(nr, p)
#define sync_test_and_clear_bit(nr, p) _test_and_clear_bit(nr, p)
#define sync_test_and_change_bit(nr, p) _test_and_change_bit(nr, p)
#define sync_test_bit(nr, addr) test_bit(nr, addr)
#define arch_sync_cmpxchg arch_cmpxchg
/*
* Fully ordered
*/
int _sync_test_and_set_bit(int nr, volatile unsigned long * p);
#define sync_test_and_set_bit(nr, p) _sync_test_and_set_bit(nr, p)
int _sync_test_and_clear_bit(int nr, volatile unsigned long * p);
#define sync_test_and_clear_bit(nr, p) _sync_test_and_clear_bit(nr, p)
int _sync_test_and_change_bit(int nr, volatile unsigned long * p);
#define sync_test_and_change_bit(nr, p) _sync_test_and_change_bit(nr, p)
#define arch_sync_cmpxchg(ptr, old, new) \
({ \
__typeof__(*(ptr)) __ret; \
__smp_mb__before_atomic(); \
__ret = arch_cmpxchg_relaxed((ptr), (old), (new)); \
__smp_mb__after_atomic(); \
__ret; \
})
#endif

3
arch/arm/include/asm/syscall.h
View File

@@ -25,6 +25,9 @@ static inline int syscall_get_nr(struct task_struct *task,
if (IS_ENABLED(CONFIG_AEABI) && !IS_ENABLED(CONFIG_OABI_COMPAT))
return task_thread_info(task)->abi_syscall;
if (task_thread_info(task)->abi_syscall == -1)
return -1;
return task_thread_info(task)->abi_syscall & __NR_SYSCALL_MASK;
}

1
arch/arm/kernel/entry-common.S
View File

@@ -101,6 +101,7 @@ slow_work_pending:
cmp r0, #0
beq no_work_pending
movlt scno, #(__NR_restart_syscall - __NR_SYSCALL_BASE)
str scno, [tsk, #TI_ABI_SYSCALL] @ make sure tracers see update
ldmia sp, {r0 - r6} @ have to reload r0 - r6
b local_restart @ ... and off we go
ENDPROC(ret_fast_syscall)

5
arch/arm/kernel/ptrace.c
View File

@@ -786,8 +786,9 @@ long arch_ptrace(struct task_struct *child, long request,
break;
case PTRACE_SET_SYSCALL:
task_thread_info(child)->abi_syscall = data &
__NR_SYSCALL_MASK;
if (data != -1)
data &= __NR_SYSCALL_MASK;
task_thread_info(child)->abi_syscall = data;
ret = 0;
break;

14
arch/arm/lib/bitops.h
View File

@@ -28,7 +28,7 @@ UNWIND( .fnend )
ENDPROC(\name )
.endm
.macro testop, name, instr, store
.macro __testop, name, instr, store, barrier
ENTRY( \name )
UNWIND( .fnstart )
ands ip, r1, #3
@@ -38,7 +38,7 @@ UNWIND( .fnstart )
mov r0, r0, lsr #5
add r1, r1, r0, lsl #2 @ Get word offset
mov r3, r2, lsl r3 @ create mask
smp_dmb
\barrier
#if __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP)
.arch_extension mp
ALT_SMP(W(pldw) [r1])
@@ -50,13 +50,21 @@ UNWIND( .fnstart )
strex ip, r2, [r1]
cmp ip, #0
bne 1b
smp_dmb
\barrier
cmp r0, #0
movne r0, #1
2: bx lr
UNWIND( .fnend )
ENDPROC(\name )
.endm
.macro testop, name, instr, store
__testop \name, \instr, \store, smp_dmb
.endm
.macro sync_testop, name, instr, store
__testop \name, \instr, \store, __smp_dmb
.endm
#else
.macro bitop, name, instr
ENTRY( \name )

4
arch/arm/lib/testchangebit.S
View File

@@ -10,3 +10,7 @@
.text
testop _test_and_change_bit, eor, str
#if __LINUX_ARM_ARCH__ >= 6
sync_testop _sync_test_and_change_bit, eor, str
#endif

4
arch/arm/lib/testclearbit.S
View File

@@ -10,3 +10,7 @@
.text
testop _test_and_clear_bit, bicne, strne
#if __LINUX_ARM_ARCH__ >= 6
sync_testop _sync_test_and_clear_bit, bicne, strne
#endif

4
arch/arm/lib/testsetbit.S
View File

@@ -10,3 +10,7 @@
.text
testop _test_and_set_bit, orreq, streq
#if __LINUX_ARM_ARCH__ >= 6
sync_testop _sync_test_and_set_bit, orreq, streq
#endif

3
arch/arm/mach-ep93xx/timer-ep93xx.c
View File

@@ -9,6 +9,7 @@
#include <linux/io.h>
#include <asm/mach/time.h>
#include "soc.h"
#include "platform.h"
/*************************************************************************
* Timer handling for EP93xx
@@ -60,7 +61,7 @@ static u64 notrace ep93xx_read_sched_clock(void)
return ret;
}
u64 ep93xx_clocksource_read(struct clocksource *c)
static u64 ep93xx_clocksource_read(struct clocksource *c)
{
u64 ret;

1
arch/arm/mach-omap2/board-generic.c
View File

@@ -13,6 +13,7 @@
#include <linux/of_platform.h>
#include <linux/irqdomain.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>

3
arch/arm/mach-orion5x/board-dt.c
View File

@@ -63,6 +63,9 @@ static void __init orion5x_dt_init(void)
if (of_machine_is_compatible("maxtor,shared-storage-2"))
mss2_init();
if (of_machine_is_compatible("lacie,d2-network"))
d2net_init();
of_platform_default_populate(NULL, orion5x_auxdata_lookup, NULL);
}

6
arch/arm/mach-orion5x/common.h
View File

@@ -75,6 +75,12 @@ extern void mss2_init(void);
static inline void mss2_init(void) {}
#endif
#ifdef CONFIG_MACH_D2NET_DT
void d2net_init(void);
#else
static inline void d2net_init(void) {}
#endif
/*****************************************************************************
* Helpers to access Orion registers
****************************************************************************/

2
arch/arm/probes/kprobes/checkers-common.c
View File

@@ -40,7 +40,7 @@ enum probes_insn checker_stack_use_imm_0xx(probes_opcode_t insn,
* Different from other insn uses imm8, the real addressing offset of
* STRD in T32 encoding should be imm8 * 4. See ARMARM description.
*/
enum probes_insn checker_stack_use_t32strd(probes_opcode_t insn,
static enum probes_insn checker_stack_use_t32strd(probes_opcode_t insn,
struct arch_probes_insn *asi,
const struct decode_header *h)
{

2
arch/arm/probes/kprobes/core.c
View File

@@ -233,7 +233,7 @@ singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb)
* kprobe, and that level is reserved for user kprobe handlers, so we can't
* risk encountering a new kprobe in an interrupt handler.
*/
void __kprobes kprobe_handler(struct pt_regs *regs)
static void __kprobes kprobe_handler(struct pt_regs *regs)
{
struct kprobe *p, *cur;
struct kprobe_ctlblk *kcb;

2
arch/arm/probes/kprobes/opt-arm.c
View File

@@ -145,8 +145,6 @@ __arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty)
}
}
extern void kprobe_handler(struct pt_regs *regs);
static void
optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs)
{

2
arch/arm/probes/kprobes/test-core.c
View File

@@ -720,7 +720,7 @@ static const char coverage_register_lookup[16] = {
[REG_TYPE_NOSPPCX] = COVERAGE_ANY_REG | COVERAGE_SP,
};
unsigned coverage_start_registers(const struct decode_header *h)
static unsigned coverage_start_registers(const struct decode_header *h)
{
unsigned regs = 0;
int i;

4
arch/arm/probes/kprobes/test-core.h
View File

@@ -454,3 +454,7 @@ void kprobe_thumb32_test_cases(void);
#else
void kprobe_arm_test_cases(void);
#endif
void __kprobes_test_case_start(void);
void __kprobes_test_case_end_16(void);
void __kprobes_test_case_end_32(void);

4
arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
View File

@@ -281,6 +281,10 @@
};
};
&gic {
mediatek,broken-save-restore-fw;
};
&gpu {
mali-supply = <&mt6358_vgpu_reg>;
sram-supply = <&mt6358_vsram_gpu_reg>;

22
arch/arm64/boot/dts/mediatek/mt8192.dtsi
View File

@@ -41,7 +41,8 @@
clock-frequency = <1701000000>;
cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
performance-domains = <&performance 0>;
capacity-dmips-mhz = <427>;
};
cpu1: cpu@100 {
@@ -52,7 +53,8 @@
clock-frequency = <1701000000>;
cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
performance-domains = <&performance 0>;
capacity-dmips-mhz = <427>;
};
cpu2: cpu@200 {
@@ -63,7 +65,8 @@
clock-frequency = <1701000000>;
cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
performance-domains = <&performance 0>;
capacity-dmips-mhz = <427>;
};
cpu3: cpu@300 {
@@ -74,7 +77,8 @@
clock-frequency = <1701000000>;
cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>;
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <530>;
performance-domains = <&performance 0>;
capacity-dmips-mhz = <427>;
};
cpu4: cpu@400 {
@@ -85,6 +89,7 @@
clock-frequency = <2171000000>;
cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
next-level-cache = <&l2_1>;
performance-domains = <&performance 1>;
capacity-dmips-mhz = <1024>;
};
@@ -96,6 +101,7 @@
clock-frequency = <2171000000>;
cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
next-level-cache = <&l2_1>;
performance-domains = <&performance 1>;
capacity-dmips-mhz = <1024>;
};
@@ -107,6 +113,7 @@
clock-frequency = <2171000000>;
cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
next-level-cache = <&l2_1>;
performance-domains = <&performance 1>;
capacity-dmips-mhz = <1024>;
};
@@ -118,6 +125,7 @@
clock-frequency = <2171000000>;
cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>;
next-level-cache = <&l2_1>;
performance-domains = <&performance 1>;
capacity-dmips-mhz = <1024>;
};
@@ -234,6 +242,12 @@
compatible = "simple-bus";
ranges;
performance: performance-controller@11bc10 {
compatible = "mediatek,cpufreq-hw";
reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
#performance-domain-cells = <1>;
};
gic: interrupt-controller@c000000 {
compatible = "arm,gic-v3";
#interrupt-cells = <4>;

2
arch/arm64/boot/dts/microchip/sparx5.dtsi
View File

@@ -61,7 +61,7 @@
interrupt-affinity = <&cpu0>, <&cpu1>;
};
psci {
psci: psci {
compatible = "arm,psci-0.2";
method = "smc";
};

12
arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
View File

@@ -6,6 +6,18 @@
/dts-v1/;
#include "sparx5.dtsi"
&psci {
status = "disabled";
};
&cpu0 {
enable-method = "spin-table";
};
&cpu1 {
enable-method = "spin-table";
};
&uart0 {
status = "okay";
};

840
arch/arm64/boot/dts/qcom/apq8016-sbc.dts
View File

@@ -5,9 +5,847 @@
/dts-v1/;
#include "apq8016-sbc.dtsi"
#include "msm8916-pm8916.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
#include <dt-bindings/sound/apq8016-lpass.h>
/ {
model = "Qualcomm Technologies, Inc. APQ 8016 SBC";
compatible = "qcom,apq8016-sbc", "qcom,apq8016";
aliases {
serial0 = &blsp1_uart2;
serial1 = &blsp1_uart1;
usid0 = &pm8916_0;
i2c0 = &blsp_i2c2;
i2c1 = &blsp_i2c6;
i2c3 = &blsp_i2c4;
spi0 = &blsp_spi5;
spi1 = &blsp_spi3;
};
chosen {
stdout-path = "serial0";
};
camera_vdddo_1v8: camera-vdddo-1v8 {
compatible = "regulator-fixed";
regulator-name = "camera_vdddo";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
camera_vdda_2v8: camera-vdda-2v8 {
compatible = "regulator-fixed";
regulator-name = "camera_vdda";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
camera_vddd_1v5: camera-vddd-1v5 {
compatible = "regulator-fixed";
regulator-name = "camera_vddd";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
reserved-memory {
ramoops@bff00000 {
compatible = "ramoops";
reg = <0x0 0xbff00000 0x0 0x100000>;
record-size = <0x20000>;
console-size = <0x20000>;
ftrace-size = <0x20000>;
};
};
usb2513 {
compatible = "smsc,usb3503";
reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
initial-mode = <1>;
};
usb_id: usb-id {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb_id_default>;
};
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con: endpoint {
remote-endpoint = <&adv7533_out>;
};
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&msm_key_volp_n_default>;
button@0 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
};
};
leds {
pinctrl-names = "default";
pinctrl-0 = <&msmgpio_leds>,
<&pm8916_gpios_leds>,
<&pm8916_mpps_leds>;
compatible = "gpio-leds";
led@1 {
label = "apq8016-sbc:green:user1";
gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
led@2 {
label = "apq8016-sbc:green:user2";
gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led@3 {
label = "apq8016-sbc:green:user3";
gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc1";
default-state = "off";
};
led@4 {
label = "apq8016-sbc:green:user4";
gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none";
panic-indicator;
default-state = "off";
};
led@5 {
label = "apq8016-sbc:yellow:wlan";
gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tx";
default-state = "off";
};
led@6 {
label = "apq8016-sbc:blue:bt";
gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "bluetooth-power";
default-state = "off";
};
};
};
&blsp_dma {
status = "okay";
};
&blsp_i2c2 {
/* On Low speed expansion */
status = "okay";
label = "LS-I2C0";
};
&blsp_i2c4 {
/* On High speed expansion */
status = "okay";
label = "HS-I2C2";
adv_bridge: bridge@39 {
status = "okay";
compatible = "adi,adv7533";
reg = <0x39>;
interrupt-parent = <&msmgpio>;
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
adi,dsi-lanes = <4>;
clocks = <&rpmcc RPM_SMD_BB_CLK2>;
clock-names = "cec";
pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
avdd-supply = <&pm8916_l6>;
v1p2-supply = <&pm8916_l6>;
v3p3-supply = <&pm8916_l17>;
pinctrl-names = "default","sleep";
pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
#sound-dai-cells = <1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7533_in: endpoint {
remote-endpoint = <&dsi0_out>;
};
};
port@1 {
reg = <1>;
adv7533_out: endpoint {
remote-endpoint = <&hdmi_con>;
};
};
};
};
};
&blsp_i2c6 {
/* On Low speed expansion */
status = "okay";
label = "LS-I2C1";
};
&blsp_spi3 {
/* On High speed expansion */
status = "okay";
label = "HS-SPI1";
};
&blsp_spi5 {
/* On Low speed expansion */
status = "okay";
label = "LS-SPI0";
};
&blsp1_uart1 {
status = "okay";
label = "LS-UART0";
};
&blsp1_uart2 {
status = "okay";
label = "LS-UART1";
};
&camss {
status = "okay";
ports {
port@0 {
reg = <0>;
csiphy0_ep: endpoint {
clock-lanes = <1>;
data-lanes = <0 2>;
remote-endpoint = <&ov5640_ep>;
status = "okay";
};
};
};
};
&cci {
status = "okay";
};
&cci_i2c0 {
camera_rear@3b {
compatible = "ovti,ov5640";
reg = <0x3b>;
enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>;
reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&camera_rear_default>;
clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
clock-names = "xclk";
clock-frequency = <23880000>;
vdddo-supply = <&camera_vdddo_1v8>;
vdda-supply = <&camera_vdda_2v8>;
vddd-supply = <&camera_vddd_1v5>;
/* No camera mezzanine by default */
status = "disabled";
port {
ov5640_ep: endpoint {
clock-lanes = <1>;
data-lanes = <0 2>;
remote-endpoint = <&csiphy0_ep>;
};
};
};
};
&dsi0_out {
data-lanes = <0 1 2 3>;
remote-endpoint = <&adv7533_in>;
};
&lpass {
status = "okay";
};
&mdss {
status = "okay";
};
&mpss {
status = "okay";
firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn";
};
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
};
&pronto {
status = "okay";
firmware-name = "qcom/apq8016/wcnss.mbn";
};
&sdhc_1 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
&sdhc_2 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
};
&sound {
status = "okay";
pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
pinctrl-names = "default", "sleep";
qcom,model = "DB410c";
qcom,audio-routing =
"AMIC2", "MIC BIAS Internal2",
"AMIC3", "MIC BIAS External1";
external-dai-link@0 {
link-name = "ADV7533";
cpu {
sound-dai = <&lpass MI2S_QUATERNARY>;
};
codec {
sound-dai = <&adv_bridge 0>;
};
};
internal-codec-playback-dai-link@0 {
link-name = "WCD";
cpu {
sound-dai = <&lpass MI2S_PRIMARY>;
};
codec {
sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
};
};
internal-codec-capture-dai-link@0 {
link-name = "WCD-Capture";
cpu {
sound-dai = <&lpass MI2S_TERTIARY>;
};
codec {
sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
};
};
};
&usb {
status = "okay";
extcon = <&usb_id>, <&usb_id>;
pinctrl-names = "default", "device";
pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
};
&usb_hs_phy {
extcon = <&usb_id>;
};
&wcd_codec {
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
clock-names = "mclk";
qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
};
&wcnss_ctrl {
firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin";
};
/* Enable CoreSight */
&cti0 { status = "okay"; };
&cti1 { status = "okay"; };
&cti12 { status = "okay"; };
&cti13 { status = "okay"; };
&cti14 { status = "okay"; };
&cti15 { status = "okay"; };
&debug0 { status = "okay"; };
&debug1 { status = "okay"; };
&debug2 { status = "okay"; };
&debug3 { status = "okay"; };
&etf { status = "okay"; };
&etm0 { status = "okay"; };
&etm1 { status = "okay"; };
&etm2 { status = "okay"; };
&etm3 { status = "okay"; };
&etr { status = "okay"; };
&funnel0 { status = "okay"; };
&funnel1 { status = "okay"; };
&replicator { status = "okay"; };
&stm { status = "okay"; };
&tpiu { status = "okay"; };
&smd_rpm_regulators {
vdd_l1_l2_l3-supply = <&pm8916_s3>;
vdd_l4_l5_l6-supply = <&pm8916_s4>;
vdd_l7-supply = <&pm8916_s4>;
s3 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1350000>;
};
s4 {
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <2150000>;
regulator-always-on;
regulator-boot-on;
};
l1 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
l4 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
l5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l8 {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
};
l9 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
l10 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
l11 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
regulator-system-load = <200000>;
};
l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
l13 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
/*
* The 96Boards specification expects a 1.8V power rail on the low-speed
* expansion connector that is able to provide at least 0.18W / 100 mA.
* L15/L16 are connected in parallel to provide 55 mA each. A minimum load
* must be specified to ensure the regulators are not put in LPM where they
* would only provide 5 mA.
*/
l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-system-load = <50000>;
regulator-allow-set-load;
regulator-always-on;
};
l16 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-system-load = <50000>;
regulator-allow-set-load;
regulator-always-on;
};
l17 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
l18 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
};
/*
* 2mA drive strength is not enough when connecting multiple
* I2C devices with different pull up resistors.
*/
&i2c2_default {
drive-strength = <16>;
};
&i2c4_default {
drive-strength = <16>;
};
&i2c6_default {
drive-strength = <16>;
};
/*
* GPIO name legend: proper name = the GPIO line is used as GPIO
* NC = not connected (pin out but not routed from the chip to
* anything the board)
* "[PER]" = pin is muxed for [peripheral] (not GPIO)
* LSEC = Low Speed External Connector
* HSEC = High Speed External Connector
*
* Line names are taken from the schematic "DragonBoard410c"
* dated monday, august 31, 2015. Page 5 in particular.
*
* For the lines routed to the external connectors the
* lines are named after the 96Boards CE Specification 1.0,
* Appendix "Expansion Connector Signal Description".
*
* When the 96Board naming of a line and the schematic name of
* the same line are in conflict, the 96Board specification
* takes precedence, which means that the external UART on the
* LSEC is named UART0 while the schematic and SoC names this
* UART3. This is only for the informational lines i.e. "[FOO]",
* the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
* ones actually used for GPIO.
*/
&msmgpio {
gpio-line-names =
"[UART0_TX]", /* GPIO_0, LSEC pin 5 */
"[UART0_RX]", /* GPIO_1, LSEC pin 7 */
"[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */
"[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */
"[UART1_TX]", /* GPIO_4, LSEC pin 11 */
"[UART1_RX]", /* GPIO_5, LSEC pin 13 */
"[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */
"[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
"[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */
"[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
"[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */
"[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */
"GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
"GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */
"[I2C3_SDA]", /* HSEC pin 38 */
"[I2C3_SCL]", /* HSEC pin 36 */
"[SPI0_MOSI]", /* LSEC pin 14 */
"[SPI0_MISO]", /* LSEC pin 10 */
"[SPI0_CS_N]", /* LSEC pin 12 */
"[SPI0_CLK]", /* LSEC pin 8 */
"HDMI_HPD_N", /* GPIO 20 */
"USR_LED_1_CTRL",
"[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */
"[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */
"GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */
"GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */
"[CSI0_MCLK]", /* HSEC pin 15 */
"[CSI1_MCLK]", /* HSEC pin 17 */
"GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */
"[I2C2_SDA]", /* HSEC pin 34 */
"[I2C2_SCL]", /* HSEC pin 32 */
"DSI2HDMI_INT_N",
"DSI_SW_SEL_APQ",
"GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */
"GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */
"GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */
"GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */
"FORCED_USB_BOOT",
"SD_CARD_DET_N",
"[WCSS_BT_SSBI]",
"[WCSS_WLAN_DATA_2]", /* GPIO 40 */
"[WCSS_WLAN_DATA_1]",
"[WCSS_WLAN_DATA_0]",
"[WCSS_WLAN_SET]",
"[WCSS_WLAN_CLK]",
"[WCSS_FM_SSBI]",
"[WCSS_FM_SDI]",
"[WCSS_BT_DAT_CTL]",
"[WCSS_BT_DAT_STB]",
"NC",
"NC", /* GPIO 50 */
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC", /* GPIO 60 */
"NC",
"NC",
"[CDC_PDM0_CLK]",
"[CDC_PDM0_SYNC]",
"[CDC_PDM0_TX0]",
"[CDC_PDM0_RX0]",
"[CDC_PDM0_RX1]",
"[CDC_PDM0_RX2]",
"GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */
"NC", /* GPIO 70 */
"NC",
"NC",
"NC",
"NC", /* GPIO 74 */
"NC",
"NC",
"NC",
"NC",
"NC",
"BOOT_CONFIG_0", /* GPIO 80 */
"BOOT_CONFIG_1",
"BOOT_CONFIG_2",
"BOOT_CONFIG_3",
"NC",
"NC",
"BOOT_CONFIG_5",
"NC",
"NC",
"NC",
"NC", /* GPIO 90 */
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC", /* GPIO 100 */
"NC",
"NC",
"NC",
"SSBI_GPS",
"NC",
"NC",
"KEY_VOLP_N",
"NC",
"NC",
"[LS_EXP_MI2S_WS]", /* GPIO 110 */
"NC",
"NC",
"[LS_EXP_MI2S_SCK]",
"[LS_EXP_MI2S_DATA0]",
"GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */
"NC",
"[DSI2HDMI_MI2S_WS]",
"[DSI2HDMI_MI2S_SCK]",
"[DSI2HDMI_MI2S_DATA0]",
"USR_LED_2_CTRL", /* GPIO 120 */
"SB_HS_ID";
msmgpio_leds: msmgpio-leds {
pins = "gpio21", "gpio120";
function = "gpio";
output-low;
};
usb_id_default: usb-id-default {
pins = "gpio121";
function = "gpio";
drive-strength = <8>;
input-enable;
bias-pull-up;
};
adv7533_int_active: adv533-int-active {
pins = "gpio31";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
adv7533_int_suspend: adv7533-int-suspend {
pins = "gpio31";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
adv7533_switch_active: adv7533-switch-active {
pins = "gpio32";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
adv7533_switch_suspend: adv7533-switch-suspend {
pins = "gpio32";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
msm_key_volp_n_default: msm-key-volp-n-default {
pins = "gpio107";
function = "gpio";
drive-strength = <8>;
input-enable;
bias-pull-up;
};
};
&pm8916_gpios {
gpio-line-names =
"USR_LED_3_CTRL",
"USR_LED_4_CTRL",
"USB_HUB_RESET_N_PM",
"USB_SW_SEL_PM";
usb_hub_reset_pm: usb-hub-reset-pm {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
input-disable;
output-high;
};
usb_hub_reset_pm_device: usb-hub-reset-pm-device {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
usb_sw_sel_pm: usb-sw-sel-pm {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <PM8916_GPIO_VPH>;
input-disable;
output-high;
};
usb_sw_sel_pm_device: usb-sw-sel-pm-device {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <PM8916_GPIO_VPH>;
input-disable;
output-low;
};
pm8916_gpios_leds: pm8916-gpios-leds {
pins = "gpio1", "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
};
&pm8916_mpps {
gpio-line-names =
"VDD_PX_BIAS",
"WLAN_LED_CTRL",
"BT_LED_CTRL",
"GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
pinctrl-names = "default";
pinctrl-0 = <&ls_exp_gpio_f>;
ls_exp_gpio_f: pm8916-mpp4-state {
pins = "mpp4";
function = "digital";
output-low;
power-source = <PM8916_MPP_L5>; // 1.8V
};
pm8916_mpps_leds: pm8916-mpps-state {
pins = "mpp2", "mpp3";
function = "digital";
output-low;
};
};

826
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
View File

@@ -1,826 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*/
#include "msm8916-pm8916.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
#include <dt-bindings/sound/apq8016-lpass.h>
/ {
aliases {
serial0 = &blsp1_uart2;
serial1 = &blsp1_uart1;
usid0 = &pm8916_0;
i2c0 = &blsp_i2c2;
i2c1 = &blsp_i2c6;
i2c3 = &blsp_i2c4;
spi0 = &blsp_spi5;
spi1 = &blsp_spi3;
};
chosen {
stdout-path = "serial0";
};
camera_vdddo_1v8: camera-vdddo-1v8 {
compatible = "regulator-fixed";
regulator-name = "camera_vdddo";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
camera_vdda_2v8: camera-vdda-2v8 {
compatible = "regulator-fixed";
regulator-name = "camera_vdda";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
camera_vddd_1v5: camera-vddd-1v5 {
compatible = "regulator-fixed";
regulator-name = "camera_vddd";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
reserved-memory {
ramoops@bff00000 {
compatible = "ramoops";
reg = <0x0 0xbff00000 0x0 0x100000>;
record-size = <0x20000>;
console-size = <0x20000>;
ftrace-size = <0x20000>;
};
};
usb2513 {
compatible = "smsc,usb3503";
reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
initial-mode = <1>;
};
usb_id: usb-id {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb_id_default>;
};
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con: endpoint {
remote-endpoint = <&adv7533_out>;
};
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&msm_key_volp_n_default>;
button@0 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
};
};
leds {
pinctrl-names = "default";
pinctrl-0 = <&msmgpio_leds>,
<&pm8916_gpios_leds>,
<&pm8916_mpps_leds>;
compatible = "gpio-leds";
led@1 {
label = "apq8016-sbc:green:user1";
gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
led@2 {
label = "apq8016-sbc:green:user2";
gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led@3 {
label = "apq8016-sbc:green:user3";
gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc1";
default-state = "off";
};
led@4 {
label = "apq8016-sbc:green:user4";
gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none";
panic-indicator;
default-state = "off";
};
led@5 {
label = "apq8016-sbc:yellow:wlan";
gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tx";
default-state = "off";
};
led@6 {
label = "apq8016-sbc:blue:bt";
gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "bluetooth-power";
default-state = "off";
};
};
};
&blsp_dma {
status = "okay";
};
&blsp_i2c2 {
/* On Low speed expansion */
status = "okay";
label = "LS-I2C0";
};
&blsp_i2c4 {
/* On High speed expansion */
status = "okay";
label = "HS-I2C2";
adv_bridge: bridge@39 {
status = "okay";
compatible = "adi,adv7533";
reg = <0x39>;
interrupt-parent = <&msmgpio>;
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
adi,dsi-lanes = <4>;
clocks = <&rpmcc RPM_SMD_BB_CLK2>;
clock-names = "cec";
pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
avdd-supply = <&pm8916_l6>;
v1p2-supply = <&pm8916_l6>;
v3p3-supply = <&pm8916_l17>;
pinctrl-names = "default","sleep";
pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
#sound-dai-cells = <1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7533_in: endpoint {
remote-endpoint = <&dsi0_out>;
};
};
port@1 {
reg = <1>;
adv7533_out: endpoint {
remote-endpoint = <&hdmi_con>;
};
};
};
};
};
&blsp_i2c6 {
/* On Low speed expansion */
status = "okay";
label = "LS-I2C1";
};
&blsp_spi3 {
/* On High speed expansion */
status = "okay";
label = "HS-SPI1";
};
&blsp_spi5 {
/* On Low speed expansion */
status = "okay";
label = "LS-SPI0";
};
&blsp1_uart1 {
status = "okay";
label = "LS-UART0";
};
&blsp1_uart2 {
status = "okay";
label = "LS-UART1";
};
&camss {
status = "okay";
ports {
port@0 {
reg = <0>;
csiphy0_ep: endpoint {
clock-lanes = <1>;
data-lanes = <0 2>;
remote-endpoint = <&ov5640_ep>;
status = "okay";
};
};
};
};
&cci {
status = "okay";
};
&cci_i2c0 {
camera_rear@3b {
compatible = "ovti,ov5640";
reg = <0x3b>;
enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>;
reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&camera_rear_default>;
clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
clock-names = "xclk";
clock-frequency = <23880000>;
vdddo-supply = <&camera_vdddo_1v8>;
vdda-supply = <&camera_vdda_2v8>;
vddd-supply = <&camera_vddd_1v5>;
/* No camera mezzanine by default */
status = "disabled";
port {
ov5640_ep: endpoint {
clock-lanes = <1>;
data-lanes = <0 2>;
remote-endpoint = <&csiphy0_ep>;
};
};
};
};
&dsi0_out {
data-lanes = <0 1 2 3>;
remote-endpoint = <&adv7533_in>;
};
&lpass {
status = "okay";
};
&mdss {
status = "okay";
};
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
};
&pronto {
status = "okay";
};
&sdhc_1 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
&sdhc_2 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
};
&sound {
status = "okay";
pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
pinctrl-names = "default", "sleep";
qcom,model = "DB410c";
qcom,audio-routing =
"AMIC2", "MIC BIAS Internal2",
"AMIC3", "MIC BIAS External1";
external-dai-link@0 {
link-name = "ADV7533";
cpu {
sound-dai = <&lpass MI2S_QUATERNARY>;
};
codec {
sound-dai = <&adv_bridge 0>;
};
};
internal-codec-playback-dai-link@0 {
link-name = "WCD";
cpu {
sound-dai = <&lpass MI2S_PRIMARY>;
};
codec {
sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
};
};
internal-codec-capture-dai-link@0 {
link-name = "WCD-Capture";
cpu {
sound-dai = <&lpass MI2S_TERTIARY>;
};
codec {
sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
};
};
};
&usb {
status = "okay";
extcon = <&usb_id>, <&usb_id>;
pinctrl-names = "default", "device";
pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
};
&usb_hs_phy {
extcon = <&usb_id>;
};
&wcd_codec {
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
clock-names = "mclk";
qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
};
/* Enable CoreSight */
&cti0 { status = "okay"; };
&cti1 { status = "okay"; };
&cti12 { status = "okay"; };
&cti13 { status = "okay"; };
&cti14 { status = "okay"; };
&cti15 { status = "okay"; };
&debug0 { status = "okay"; };
&debug1 { status = "okay"; };
&debug2 { status = "okay"; };
&debug3 { status = "okay"; };
&etf { status = "okay"; };
&etm0 { status = "okay"; };
&etm1 { status = "okay"; };
&etm2 { status = "okay"; };
&etm3 { status = "okay"; };
&etr { status = "okay"; };
&funnel0 { status = "okay"; };
&funnel1 { status = "okay"; };
&replicator { status = "okay"; };
&stm { status = "okay"; };
&tpiu { status = "okay"; };
&smd_rpm_regulators {
vdd_l1_l2_l3-supply = <&pm8916_s3>;
vdd_l4_l5_l6-supply = <&pm8916_s4>;
vdd_l7-supply = <&pm8916_s4>;
s3 {
regulator-min-microvolt = <375000>;
regulator-max-microvolt = <1562000>;
};
s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
l1 {
regulator-min-microvolt = <375000>;
regulator-max-microvolt = <1525000>;
};
l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
l4 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l5 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l7 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l8 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l9 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l10 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l11 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
regulator-allow-set-load;
regulator-system-load = <200000>;
};
l12 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l13 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l14 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
/**
* 1.8v required on LS expansion
* for mezzanine boards
*/
l15 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
regulator-always-on;
};
l16 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
l17 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
l18 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
};
};
/*
* 2mA drive strength is not enough when connecting multiple
* I2C devices with different pull up resistors.
*/
&i2c2_default {
drive-strength = <16>;
};
&i2c4_default {
drive-strength = <16>;
};
&i2c6_default {
drive-strength = <16>;
};
/*
* GPIO name legend: proper name = the GPIO line is used as GPIO
* NC = not connected (pin out but not routed from the chip to
* anything the board)
* "[PER]" = pin is muxed for [peripheral] (not GPIO)
* LSEC = Low Speed External Connector
* HSEC = High Speed External Connector
*
* Line names are taken from the schematic "DragonBoard410c"
* dated monday, august 31, 2015. Page 5 in particular.
*
* For the lines routed to the external connectors the
* lines are named after the 96Boards CE Specification 1.0,
* Appendix "Expansion Connector Signal Description".
*
* When the 96Board naming of a line and the schematic name of
* the same line are in conflict, the 96Board specification
* takes precedence, which means that the external UART on the
* LSEC is named UART0 while the schematic and SoC names this
* UART3. This is only for the informational lines i.e. "[FOO]",
* the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
* ones actually used for GPIO.
*/
&msmgpio {
gpio-line-names =
"[UART0_TX]", /* GPIO_0, LSEC pin 5 */
"[UART0_RX]", /* GPIO_1, LSEC pin 7 */
"[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */
"[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */
"[UART1_TX]", /* GPIO_4, LSEC pin 11 */
"[UART1_RX]", /* GPIO_5, LSEC pin 13 */
"[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */
"[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
"[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */
"[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
"[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */
"[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */
"GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
"GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */
"[I2C3_SDA]", /* HSEC pin 38 */
"[I2C3_SCL]", /* HSEC pin 36 */
"[SPI0_MOSI]", /* LSEC pin 14 */
"[SPI0_MISO]", /* LSEC pin 10 */
"[SPI0_CS_N]", /* LSEC pin 12 */
"[SPI0_CLK]", /* LSEC pin 8 */
"HDMI_HPD_N", /* GPIO 20 */
"USR_LED_1_CTRL",
"[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */
"[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */
"GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */
"GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */
"[CSI0_MCLK]", /* HSEC pin 15 */
"[CSI1_MCLK]", /* HSEC pin 17 */
"GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */
"[I2C2_SDA]", /* HSEC pin 34 */
"[I2C2_SCL]", /* HSEC pin 32 */
"DSI2HDMI_INT_N",
"DSI_SW_SEL_APQ",
"GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */
"GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */
"GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */
"GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */
"FORCED_USB_BOOT",
"SD_CARD_DET_N",
"[WCSS_BT_SSBI]",
"[WCSS_WLAN_DATA_2]", /* GPIO 40 */
"[WCSS_WLAN_DATA_1]",
"[WCSS_WLAN_DATA_0]",
"[WCSS_WLAN_SET]",
"[WCSS_WLAN_CLK]",
"[WCSS_FM_SSBI]",
"[WCSS_FM_SDI]",
"[WCSS_BT_DAT_CTL]",
"[WCSS_BT_DAT_STB]",
"NC",
"NC", /* GPIO 50 */
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC", /* GPIO 60 */
"NC",
"NC",
"[CDC_PDM0_CLK]",
"[CDC_PDM0_SYNC]",
"[CDC_PDM0_TX0]",
"[CDC_PDM0_RX0]",
"[CDC_PDM0_RX1]",
"[CDC_PDM0_RX2]",
"GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */
"NC", /* GPIO 70 */
"NC",
"NC",
"NC",
"NC", /* GPIO 74 */
"NC",
"NC",
"NC",
"NC",
"NC",
"BOOT_CONFIG_0", /* GPIO 80 */
"BOOT_CONFIG_1",
"BOOT_CONFIG_2",
"BOOT_CONFIG_3",
"NC",
"NC",
"BOOT_CONFIG_5",
"NC",
"NC",
"NC",
"NC", /* GPIO 90 */
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC", /* GPIO 100 */
"NC",
"NC",
"NC",
"SSBI_GPS",
"NC",
"NC",
"KEY_VOLP_N",
"NC",
"NC",
"[LS_EXP_MI2S_WS]", /* GPIO 110 */
"NC",
"NC",
"[LS_EXP_MI2S_SCK]",
"[LS_EXP_MI2S_DATA0]",
"GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */
"NC",
"[DSI2HDMI_MI2S_WS]",
"[DSI2HDMI_MI2S_SCK]",
"[DSI2HDMI_MI2S_DATA0]",
"USR_LED_2_CTRL", /* GPIO 120 */
"SB_HS_ID";
msmgpio_leds: msmgpio-leds {
pins = "gpio21", "gpio120";
function = "gpio";
output-low;
};
usb_id_default: usb-id-default {
pins = "gpio121";
function = "gpio";
drive-strength = <8>;
input-enable;
bias-pull-up;
};
adv7533_int_active: adv533-int-active {
pins = "gpio31";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
adv7533_int_suspend: adv7533-int-suspend {
pins = "gpio31";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
adv7533_switch_active: adv7533-switch-active {
pins = "gpio32";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
adv7533_switch_suspend: adv7533-switch-suspend {
pins = "gpio32";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
msm_key_volp_n_default: msm-key-volp-n-default {
pins = "gpio107";
function = "gpio";
drive-strength = <8>;
input-enable;
bias-pull-up;
};
};
&pm8916_gpios {
gpio-line-names =
"USR_LED_3_CTRL",
"USR_LED_4_CTRL",
"USB_HUB_RESET_N_PM",
"USB_SW_SEL_PM";
usb_hub_reset_pm: usb-hub-reset-pm {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
input-disable;
output-high;
};
usb_hub_reset_pm_device: usb-hub-reset-pm-device {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
usb_sw_sel_pm: usb-sw-sel-pm {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <PM8916_GPIO_VPH>;
input-disable;
output-high;
};
usb_sw_sel_pm_device: usb-sw-sel-pm-device {
pins = "gpio4";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <PM8916_GPIO_VPH>;
input-disable;
output-low;
};
pm8916_gpios_leds: pm8916-gpios-leds {
pins = "gpio1", "gpio2";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
};
};
&pm8916_mpps {
gpio-line-names =
"VDD_PX_BIAS",
"WLAN_LED_CTRL",
"BT_LED_CTRL",
"GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
pinctrl-names = "default";
pinctrl-0 = <&ls_exp_gpio_f>;
ls_exp_gpio_f: pm8916-mpp4 {
pins = "mpp4";
function = "digital";
output-low;
power-source = <PM8916_MPP_L5>; // 1.8V
};
pm8916_mpps_leds: pm8916-mpps-leds {
pins = "mpp2", "mpp3";
function = "digital";
output-low;
};
};

1070
arch/arm64/boot/dts/qcom/apq8096-db820c.dts
View File

File diff suppressed because it is too large Load Diff

1105
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
View File

File diff suppressed because it is too large Load Diff

4
arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
View File

@@ -26,7 +26,7 @@
v1p05: v1p05-regulator {
compatible = "regulator-fixed";
reglator-name = "v1p05";
regulator-name = "v1p05";
regulator-always-on;
regulator-boot-on;
@@ -38,7 +38,7 @@
v12_poe: v12-poe-regulator {
compatible = "regulator-fixed";
reglator-name = "v12_poe";
regulator-name = "v12_poe";
regulator-always-on;
regulator-boot-on;

15
arch/arm64/boot/dts/qcom/msm8916-mtp.dts
View File

@@ -5,9 +5,22 @@
/dts-v1/;
#include "msm8916-mtp.dtsi"
#include "msm8916-pm8916.dtsi"
/ {
model = "Qualcomm Technologies, Inc. MSM 8916 MTP";
compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916";
aliases {
serial0 = &blsp1_uart2;
usid0 = &pm8916_0;
};
chosen {
stdout-path = "serial0";
};
};
&blsp1_uart2 {
status = "okay";
};

21
arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
View File

@@ -1,21 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
*/
#include "msm8916-pm8916.dtsi"
/ {
aliases {
serial0 = &blsp1_uart2;
usid0 = &pm8916_0;
};
chosen {
stdout-path = "serial0";
};
};
&blsp1_uart2 {
status = "okay";
};

4
arch/arm64/boot/dts/qcom/msm8916.dtsi
View File

@@ -1064,7 +1064,7 @@
};
};
camss: camss@1b00000 {
camss: camss@1b0ac00 {
compatible = "qcom,msm8916-camss";
reg = <0x01b0ac00 0x200>,
<0x01b00030 0x4>,
@@ -1771,7 +1771,7 @@
label = "pronto";
wcnss {
wcnss_ctrl: wcnss {
compatible = "qcom,wcnss";
qcom,smd-channels = "WCNSS_CTRL";

2
arch/arm64/boot/dts/qcom/msm8994.dtsi
View File

@@ -725,7 +725,7 @@
reg = <0xfc4ab000 0x4>;
};
spmi_bus: spmi@fc4c0000 {
spmi_bus: spmi@fc4cf000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0xfc4cf000 0x1000>,
<0xfc4cb000 0x1000>,

24
arch/arm64/boot/dts/qcom/msm8996-mtp.dts
View File

@@ -5,9 +5,31 @@
/dts-v1/;
#include "msm8996-mtp.dtsi"
#include "msm8996.dtsi"
/ {
model = "Qualcomm Technologies, Inc. MSM 8996 MTP";
compatible = "qcom,msm8996-mtp";
aliases {
serial0 = &blsp2_uart2;
};
chosen {
stdout-path = "serial0";
};
soc {
serial@75b0000 {
status = "okay";
};
};
};
&hdmi {
status = "okay";
};
&hdmi_phy {
status = "okay";
};

30
arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi
View File

@@ -1,30 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
*/
#include "msm8996.dtsi"
/ {
aliases {
serial0 = &blsp2_uart2;
};
chosen {
stdout-path = "serial0";
};
soc {
serial@75b0000 {
status = "okay";
};
};
};
&hdmi {
status = "okay";
};
&hdmi_phy {
status = "okay";
};

19
arch/arm64/boot/dts/qcom/msm8996.dtsi
View File

@@ -1228,6 +1228,20 @@
};
};
blsp1_uart2_default: blsp1-uart2-default {
pins = "gpio41", "gpio42", "gpio43", "gpio44";
function = "blsp_uart2";
drive-strength = <16>;
bias-disable;
};
blsp1_uart2_sleep: blsp1-uart2-sleep {
pins = "gpio41", "gpio42", "gpio43", "gpio44";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c3_default: blsp1-i2c2-default {
pins = "gpio47", "gpio48";
function = "blsp_i2c3";
@@ -1771,7 +1785,7 @@
};
};
camss: camss@a00000 {
camss: camss@a34000 {
compatible = "qcom,msm8996-camss";
reg = <0x00a34000 0x1000>,
<0x00a00030 0x4>,
@@ -2724,6 +2738,9 @@
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_uart2_default>;
pinctrl-1 = <&blsp1_uart2_sleep>;
dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
dma-names = "tx", "rx";
status = "disabled";

2
arch/arm64/boot/dts/qcom/sdm630.dtsi
View File

@@ -1834,7 +1834,7 @@
};
};
camss: camss@ca00000 {
camss: camss@ca00020 {
compatible = "qcom,sdm660-camss";
reg = <0x0c824000 0x1000>,
<0x0ca00120 0x4>,

2
arch/arm64/boot/dts/qcom/sdm845.dtsi
View File

@@ -3921,7 +3921,7 @@
#reset-cells = <1>;
};
camss: camss@a00000 {
camss: camss@acb3000 {
compatible = "qcom,sdm845-camss";
reg = <0 0xacb3000 0 0x1000>,

7
arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
View File

@@ -26,9 +26,10 @@
framebuffer: framebuffer@9c000000 {
compatible = "simple-framebuffer";
reg = <0 0x9c000000 0 0x2300000>;
width = <1644>;
height = <3840>;
stride = <(1644 * 4)>;
/* pdx203 BL initializes in 2.5k mode, not 4k */
width = <1096>;
height = <2560>;
stride = <(1096 * 4)>;
format = "a8r8g8b8";
/*
* That's a lot of clocks, but it's necessary due

3
arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
View File

@@ -270,7 +270,7 @@
};
scif1_pins: scif1 {
groups = "scif1_data_b", "scif1_ctrl";
groups = "scif1_data_b";
function = "scif1";
};
@@ -330,7 +330,6 @@
&scif1 {
pinctrl-0 = <&scif1_pins>;
pinctrl-names = "default";
uart-has-rtscts;
status = "okay";
};

28
arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
View File

@@ -80,25 +80,25 @@
&wkup_pmx2 {
mcu_cpsw_pins_default: mcu-cpsw-pins-default {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
J721E_WKUP_IOPAD(0x006c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
J721E_WKUP_IOPAD(0x0074, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
J721E_WKUP_IOPAD(0x0078, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
J721E_WKUP_IOPAD(0x007c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
J721E_WKUP_IOPAD(0x0080, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
J721E_WKUP_IOPAD(0x0004, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
J721E_WKUP_IOPAD(0x0008, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
J721E_WKUP_IOPAD(0x000c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
J721E_WKUP_IOPAD(0x0010, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
J721E_WKUP_IOPAD(0x0014, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
J721E_WKUP_IOPAD(0x002c, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
J721E_WKUP_IOPAD(0x0018, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
>;
};
mcu_mdio_pins_default: mcu-mdio1-pins-default {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
J721E_WKUP_IOPAD(0x0098, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
J721E_WKUP_IOPAD(0x0034, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
J721E_WKUP_IOPAD(0x0030, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
>;
};
};

1
arch/arm64/configs/gki_defconfig
View File

@@ -489,6 +489,7 @@ CONFIG_USB_HIDDEV=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_OTG=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI_RENESAS=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_HCD_PLATFORM=y

2
arch/mips/include/asm/dec/prom.h
View File

@@ -70,7 +70,7 @@ static inline bool prom_is_rex(u32 magic)
*/
typedef struct {
int pagesize;
unsigned char bitmap[0];
unsigned char bitmap[];
} memmap;

6
arch/mips/include/asm/kvm_host.h
View File

@@ -318,7 +318,7 @@ struct kvm_vcpu_arch {
unsigned int aux_inuse;
/* COP0 State */
struct mips_coproc *cop0;
struct mips_coproc cop0;
/* Resume PC after MMIO completion */
unsigned long io_pc;
@@ -699,7 +699,7 @@ static inline bool kvm_mips_guest_can_have_fpu(struct kvm_vcpu_arch *vcpu)
static inline bool kvm_mips_guest_has_fpu(struct kvm_vcpu_arch *vcpu)
{
return kvm_mips_guest_can_have_fpu(vcpu) &&
kvm_read_c0_guest_config1(vcpu->cop0) & MIPS_CONF1_FP;
kvm_read_c0_guest_config1(&vcpu->cop0) & MIPS_CONF1_FP;
}
static inline bool kvm_mips_guest_can_have_msa(struct kvm_vcpu_arch *vcpu)
@@ -711,7 +711,7 @@ static inline bool kvm_mips_guest_can_have_msa(struct kvm_vcpu_arch *vcpu)
static inline bool kvm_mips_guest_has_msa(struct kvm_vcpu_arch *vcpu)
{
return kvm_mips_guest_can_have_msa(vcpu) &&
kvm_read_c0_guest_config3(vcpu->cop0) & MIPS_CONF3_MSA;
kvm_read_c0_guest_config3(&vcpu->cop0) & MIPS_CONF3_MSA;
}
struct kvm_mips_callbacks {

9
arch/mips/kernel/cpu-probe.c
View File

@@ -1734,7 +1734,10 @@ static inline void decode_cpucfg(struct cpuinfo_mips *c)
static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
{
c->cputype = CPU_LOONGSON64;
/* All Loongson processors covered here define ExcCode 16 as GSExc. */
decode_configs(c);
c->options |= MIPS_CPU_GSEXCEX;
switch (c->processor_id & PRID_IMP_MASK) {
@@ -1744,7 +1747,6 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
case PRID_REV_LOONGSON2K_R1_1:
case PRID_REV_LOONGSON2K_R1_2:
case PRID_REV_LOONGSON2K_R1_3:
c->cputype = CPU_LOONGSON64;
__cpu_name[cpu] = "Loongson-2K";
set_elf_platform(cpu, "gs264e");
set_isa(c, MIPS_CPU_ISA_M64R2);
@@ -1757,14 +1759,12 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
switch (c->processor_id & PRID_REV_MASK) {
case PRID_REV_LOONGSON3A_R2_0:
case PRID_REV_LOONGSON3A_R2_1:
c->cputype = CPU_LOONGSON64;
__cpu_name[cpu] = "ICT Loongson-3";
set_elf_platform(cpu, "loongson3a");
set_isa(c, MIPS_CPU_ISA_M64R2);
break;
case PRID_REV_LOONGSON3A_R3_0:
case PRID_REV_LOONGSON3A_R3_1:
c->cputype = CPU_LOONGSON64;
__cpu_name[cpu] = "ICT Loongson-3";
set_elf_platform(cpu, "loongson3a");
set_isa(c, MIPS_CPU_ISA_M64R2);
@@ -1784,7 +1784,6 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
c->ases &= ~MIPS_ASE_VZ; /* VZ of Loongson-3A2000/3000 is incomplete */
break;
case PRID_IMP_LOONGSON_64G:
c->cputype = CPU_LOONGSON64;
__cpu_name[cpu] = "ICT Loongson-3";
set_elf_platform(cpu, "loongson3a");
set_isa(c, MIPS_CPU_ISA_M64R2);
@@ -1794,8 +1793,6 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
panic("Unknown Loongson Processor ID!");
break;
}
decode_configs(c);
}
#else
static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu) { }

22
arch/mips/kvm/emulate.c
View File

@@ -312,7 +312,7 @@ int kvm_get_badinstrp(u32 *opc, struct kvm_vcpu *vcpu, u32 *out)
*/
int kvm_mips_count_disabled(struct kvm_vcpu *vcpu)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
return (vcpu->arch.count_ctl & KVM_REG_MIPS_COUNT_CTL_DC) ||
(kvm_read_c0_guest_cause(cop0) & CAUSEF_DC);
@@ -384,7 +384,7 @@ static inline ktime_t kvm_mips_count_time(struct kvm_vcpu *vcpu)
*/
static u32 kvm_mips_read_count_running(struct kvm_vcpu *vcpu, ktime_t now)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
ktime_t expires, threshold;
u32 count, compare;
int running;
@@ -444,7 +444,7 @@ static u32 kvm_mips_read_count_running(struct kvm_vcpu *vcpu, ktime_t now)
*/
u32 kvm_mips_read_count(struct kvm_vcpu *vcpu)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
/* If count disabled just read static copy of count */
if (kvm_mips_count_disabled(vcpu))
@@ -502,7 +502,7 @@ ktime_t kvm_mips_freeze_hrtimer(struct kvm_vcpu *vcpu, u32 *count)
static void kvm_mips_resume_hrtimer(struct kvm_vcpu *vcpu,
ktime_t now, u32 count)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
u32 compare;
u64 delta;
ktime_t expire;
@@ -603,7 +603,7 @@ resume:
*/
void kvm_mips_write_count(struct kvm_vcpu *vcpu, u32 count)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
ktime_t now;
/* Calculate bias */
@@ -649,7 +649,7 @@ void kvm_mips_init_count(struct kvm_vcpu *vcpu, unsigned long count_hz)
*/
int kvm_mips_set_count_hz(struct kvm_vcpu *vcpu, s64 count_hz)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
int dc;
ktime_t now;
u32 count;
@@ -696,7 +696,7 @@ int kvm_mips_set_count_hz(struct kvm_vcpu *vcpu, s64 count_hz)
*/
void kvm_mips_write_compare(struct kvm_vcpu *vcpu, u32 compare, bool ack)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
int dc;
u32 old_compare = kvm_read_c0_guest_compare(cop0);
s32 delta = compare - old_compare;
@@ -779,7 +779,7 @@ void kvm_mips_write_compare(struct kvm_vcpu *vcpu, u32 compare, bool ack)
*/
static ktime_t kvm_mips_count_disable(struct kvm_vcpu *vcpu)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
u32 count;
ktime_t now;
@@ -806,7 +806,7 @@ static ktime_t kvm_mips_count_disable(struct kvm_vcpu *vcpu)
*/
void kvm_mips_count_disable_cause(struct kvm_vcpu *vcpu)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
kvm_set_c0_guest_cause(cop0, CAUSEF_DC);
if (!(vcpu->arch.count_ctl & KVM_REG_MIPS_COUNT_CTL_DC))
@@ -826,7 +826,7 @@ void kvm_mips_count_disable_cause(struct kvm_vcpu *vcpu)
*/
void kvm_mips_count_enable_cause(struct kvm_vcpu *vcpu)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
u32 count;
kvm_clear_c0_guest_cause(cop0, CAUSEF_DC);
@@ -852,7 +852,7 @@ void kvm_mips_count_enable_cause(struct kvm_vcpu *vcpu)
*/
int kvm_mips_set_count_ctl(struct kvm_vcpu *vcpu, s64 count_ctl)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
s64 changed = count_ctl ^ vcpu->arch.count_ctl;
s64 delta;
ktime_t expire, now;

16
arch/mips/kvm/mips.c
View File

@@ -652,7 +652,7 @@ static int kvm_mips_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices)
static int kvm_mips_get_reg(struct kvm_vcpu *vcpu,
const struct kvm_one_reg *reg)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
struct mips_fpu_struct *fpu = &vcpu->arch.fpu;
int ret;
s64 v;
@@ -764,7 +764,7 @@ static int kvm_mips_get_reg(struct kvm_vcpu *vcpu,
static int kvm_mips_set_reg(struct kvm_vcpu *vcpu,
const struct kvm_one_reg *reg)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
struct mips_fpu_struct *fpu = &vcpu->arch.fpu;
s64 v;
s64 vs[2];
@@ -1104,7 +1104,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
{
return kvm_mips_pending_timer(vcpu) ||
kvm_read_c0_guest_cause(vcpu->arch.cop0) & C_TI;
kvm_read_c0_guest_cause(&vcpu->arch.cop0) & C_TI;
}
int kvm_arch_vcpu_dump_regs(struct kvm_vcpu *vcpu)
@@ -1128,7 +1128,7 @@ int kvm_arch_vcpu_dump_regs(struct kvm_vcpu *vcpu)
kvm_debug("\thi: 0x%08lx\n", vcpu->arch.hi);
kvm_debug("\tlo: 0x%08lx\n", vcpu->arch.lo);
cop0 = vcpu->arch.cop0;
cop0 = &vcpu->arch.cop0;
kvm_debug("\tStatus: 0x%08x, Cause: 0x%08x\n",
kvm_read_c0_guest_status(cop0),
kvm_read_c0_guest_cause(cop0));
@@ -1250,7 +1250,7 @@ int kvm_mips_handle_exit(struct kvm_vcpu *vcpu)
case EXCCODE_TLBS:
kvm_debug("TLB ST fault: cause %#x, status %#x, PC: %p, BadVaddr: %#lx\n",
cause, kvm_read_c0_guest_status(vcpu->arch.cop0), opc,
cause, kvm_read_c0_guest_status(&vcpu->arch.cop0), opc,
badvaddr);
++vcpu->stat.tlbmiss_st_exits;
@@ -1322,7 +1322,7 @@ int kvm_mips_handle_exit(struct kvm_vcpu *vcpu)
kvm_get_badinstr(opc, vcpu, &inst);
kvm_err("Exception Code: %d, not yet handled, @ PC: %p, inst: 0x%08x BadVaddr: %#lx Status: %#x\n",
exccode, opc, inst, badvaddr,
kvm_read_c0_guest_status(vcpu->arch.cop0));
kvm_read_c0_guest_status(&vcpu->arch.cop0));
kvm_arch_vcpu_dump_regs(vcpu);
run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
ret = RESUME_HOST;
@@ -1384,7 +1384,7 @@ int kvm_mips_handle_exit(struct kvm_vcpu *vcpu)
/* Enable FPU for guest and restore context */
void kvm_own_fpu(struct kvm_vcpu *vcpu)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
unsigned int sr, cfg5;
preempt_disable();
@@ -1428,7 +1428,7 @@ void kvm_own_fpu(struct kvm_vcpu *vcpu)
/* Enable MSA for guest and restore context */
void kvm_own_msa(struct kvm_vcpu *vcpu)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
unsigned int sr, cfg5;
preempt_disable();

4
arch/mips/kvm/stats.c
View File

@@ -54,9 +54,9 @@ void kvm_mips_dump_stats(struct kvm_vcpu *vcpu)
kvm_info("\nKVM VCPU[%d] COP0 Access Profile:\n", vcpu->vcpu_id);
for (i = 0; i < N_MIPS_COPROC_REGS; i++) {
for (j = 0; j < N_MIPS_COPROC_SEL; j++) {
if (vcpu->arch.cop0->stat[i][j])
if (vcpu->arch.cop0.stat[i][j])
kvm_info("%s[%d]: %lu\n", kvm_cop0_str[i], j,
vcpu->arch.cop0->stat[i][j]);
vcpu->arch.cop0.stat[i][j]);
}
}
#endif

8
arch/mips/kvm/trace.h
View File

@@ -322,11 +322,11 @@ TRACE_EVENT_FN(kvm_guest_mode_change,
),
TP_fast_assign(
__entry->epc = kvm_read_c0_guest_epc(vcpu->arch.cop0);
__entry->epc = kvm_read_c0_guest_epc(&vcpu->arch.cop0);
__entry->pc = vcpu->arch.pc;
__entry->badvaddr = kvm_read_c0_guest_badvaddr(vcpu->arch.cop0);
__entry->status = kvm_read_c0_guest_status(vcpu->arch.cop0);
__entry->cause = kvm_read_c0_guest_cause(vcpu->arch.cop0);
__entry->badvaddr = kvm_read_c0_guest_badvaddr(&vcpu->arch.cop0);
__entry->status = kvm_read_c0_guest_status(&vcpu->arch.cop0);
__entry->cause = kvm_read_c0_guest_cause(&vcpu->arch.cop0);
),
TP_printk("EPC: 0x%08lx PC: 0x%08lx Status: 0x%08x Cause: 0x%08x BadVAddr: 0x%08lx",

20
arch/mips/kvm/vz.c
View File

@@ -422,7 +422,7 @@ static void _kvm_vz_restore_htimer(struct kvm_vcpu *vcpu,
*/
static void kvm_vz_restore_timer(struct kvm_vcpu *vcpu)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
u32 cause, compare;
compare = kvm_read_sw_gc0_compare(cop0);
@@ -517,7 +517,7 @@ static void _kvm_vz_save_htimer(struct kvm_vcpu *vcpu,
*/
static void kvm_vz_save_timer(struct kvm_vcpu *vcpu)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
u32 gctl0, compare, cause;
gctl0 = read_c0_guestctl0();
@@ -863,7 +863,7 @@ static unsigned long mips_process_maar(unsigned int op, unsigned long val)
static void kvm_write_maari(struct kvm_vcpu *vcpu, unsigned long val)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
val &= MIPS_MAARI_INDEX;
if (val == MIPS_MAARI_INDEX)
@@ -876,7 +876,7 @@ static enum emulation_result kvm_vz_gpsi_cop0(union mips_instruction inst,
u32 *opc, u32 cause,
struct kvm_vcpu *vcpu)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
enum emulation_result er = EMULATE_DONE;
u32 rt, rd, sel;
unsigned long curr_pc;
@@ -1905,7 +1905,7 @@ static int kvm_vz_get_one_reg(struct kvm_vcpu *vcpu,
const struct kvm_one_reg *reg,
s64 *v)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
unsigned int idx;
switch (reg->id) {
@@ -2075,7 +2075,7 @@ static int kvm_vz_get_one_reg(struct kvm_vcpu *vcpu,
case KVM_REG_MIPS_CP0_MAARI:
if (!cpu_guest_has_maar || cpu_guest_has_dyn_maar)
return -EINVAL;
*v = kvm_read_sw_gc0_maari(vcpu->arch.cop0);
*v = kvm_read_sw_gc0_maari(&vcpu->arch.cop0);
break;
#ifdef CONFIG_64BIT
case KVM_REG_MIPS_CP0_XCONTEXT:
@@ -2129,7 +2129,7 @@ static int kvm_vz_set_one_reg(struct kvm_vcpu *vcpu,
const struct kvm_one_reg *reg,
s64 v)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
unsigned int idx;
int ret = 0;
unsigned int cur, change;
@@ -2556,7 +2556,7 @@ static void kvm_vz_vcpu_load_tlb(struct kvm_vcpu *vcpu, int cpu)
static int kvm_vz_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
bool migrated, all;
/*
@@ -2698,7 +2698,7 @@ static int kvm_vz_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
static int kvm_vz_vcpu_put(struct kvm_vcpu *vcpu, int cpu)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
if (current->flags & PF_VCPU)
kvm_vz_vcpu_save_wired(vcpu);
@@ -3070,7 +3070,7 @@ static void kvm_vz_vcpu_uninit(struct kvm_vcpu *vcpu)
static int kvm_vz_vcpu_setup(struct kvm_vcpu *vcpu)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
struct mips_coproc *cop0 = &vcpu->arch.cop0;
unsigned long count_hz = 100*1000*1000; /* default to 100 MHz */
/*

4
arch/parisc/include/asm/assembly.h
View File

@@ -72,10 +72,6 @@
#include <asm/asmregs.h>
sp = 30
gp = 27
ipsw = 22
/*
* We provide two versions of each macro to convert from physical
* to virtual and vice versa. The "_r1" versions take one argument

2
arch/powerpc/Kconfig.debug
View File

@@ -240,7 +240,7 @@ config PPC_EARLY_DEBUG_40x
config PPC_EARLY_DEBUG_CPM
bool "Early serial debugging for Freescale CPM-based serial ports"
depends on SERIAL_CPM
depends on SERIAL_CPM=y
help
Select this to enable early debugging for Freescale chips
using a CPM-based serial port. This assumes that the bootwrapper

8
arch/powerpc/Makefile
View File

@@ -444,3 +444,11 @@ checkbin:
echo -n '*** Please use a different binutils version.' ; \
false ; \
fi
@if test "x${CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT}" = "xy" -a \
"x${CONFIG_LD_IS_BFD}" = "xy" -a \
"${CONFIG_LD_VERSION}" = "23700" ; then \
echo -n '*** binutils 2.37 drops unused section symbols, which recordmcount ' ; \
echo 'is unable to handle.' ; \
echo '*** Please use a different binutils version.' ; \
false ; \
fi

3
arch/powerpc/kernel/interrupt.c
View File

@@ -531,7 +531,6 @@ void preempt_schedule_irq(void);
notrace unsigned long interrupt_exit_kernel_prepare(struct pt_regs *regs)
{
unsigned long flags;
unsigned long ret = 0;
unsigned long kuap;
bool stack_store = current_thread_info()->flags &
@@ -548,7 +547,7 @@ notrace unsigned long interrupt_exit_kernel_prepare(struct pt_regs *regs)
kuap = kuap_get_and_assert_locked();
local_irq_save(flags);
local_irq_disable();
if (!arch_irq_disabled_regs(regs)) {
/* Returning to a kernel context with local irqs enabled. */

61
arch/powerpc/kernel/ppc_save_regs.S
View File

@@ -21,60 +21,33 @@
* different ABIs, though).
*/
_GLOBAL(ppc_save_regs)
PPC_STL r0,0*SZL(r3)
/* This allows stack frame accessor macros and offsets to be used */
subi r3,r3,STACK_FRAME_OVERHEAD
PPC_STL r0,GPR0(r3)
#ifdef CONFIG_PPC32
stmw r2, 2*SZL(r3)
stmw r2,GPR2(r3)
#else
PPC_STL r2,2*SZL(r3)
PPC_STL r3,3*SZL(r3)
PPC_STL r4,4*SZL(r3)
PPC_STL r5,5*SZL(r3)
PPC_STL r6,6*SZL(r3)
PPC_STL r7,7*SZL(r3)
PPC_STL r8,8*SZL(r3)
PPC_STL r9,9*SZL(r3)
PPC_STL r10,10*SZL(r3)
PPC_STL r11,11*SZL(r3)
PPC_STL r12,12*SZL(r3)
PPC_STL r13,13*SZL(r3)
PPC_STL r14,14*SZL(r3)
PPC_STL r15,15*SZL(r3)
PPC_STL r16,16*SZL(r3)
PPC_STL r17,17*SZL(r3)
PPC_STL r18,18*SZL(r3)
PPC_STL r19,19*SZL(r3)
PPC_STL r20,20*SZL(r3)
PPC_STL r21,21*SZL(r3)
PPC_STL r22,22*SZL(r3)
PPC_STL r23,23*SZL(r3)
PPC_STL r24,24*SZL(r3)
PPC_STL r25,25*SZL(r3)
PPC_STL r26,26*SZL(r3)
PPC_STL r27,27*SZL(r3)
PPC_STL r28,28*SZL(r3)
PPC_STL r29,29*SZL(r3)
PPC_STL r30,30*SZL(r3)
PPC_STL r31,31*SZL(r3)
SAVE_GPRS(2, 31, r3)
lbz r0,PACAIRQSOFTMASK(r13)
PPC_STL r0,SOFTE-STACK_FRAME_OVERHEAD(r3)
PPC_STL r0,SOFTE(r3)
#endif
/* go up one stack frame for SP */
PPC_LL r4,0(r1)
PPC_STL r4,1*SZL(r3)
/* store current SP */
PPC_STL r1,GPR1(r3)
/* get caller's LR */
PPC_LL r4,0(r1)
PPC_LL r0,LRSAVE(r4)
PPC_STL r0,_LINK-STACK_FRAME_OVERHEAD(r3)
PPC_STL r0,_LINK(r3)
mflr r0
PPC_STL r0,_NIP-STACK_FRAME_OVERHEAD(r3)
PPC_STL r0,_NIP(r3)
mfmsr r0
PPC_STL r0,_MSR-STACK_FRAME_OVERHEAD(r3)
PPC_STL r0,_MSR(r3)
mfctr r0
PPC_STL r0,_CTR-STACK_FRAME_OVERHEAD(r3)
PPC_STL r0,_CTR(r3)
mfxer r0
PPC_STL r0,_XER-STACK_FRAME_OVERHEAD(r3)
PPC_STL r0,_XER(r3)
mfcr r0
PPC_STL r0,_CCR-STACK_FRAME_OVERHEAD(r3)
PPC_STL r0,_CCR(r3)
li r0,0
PPC_STL r0,_TRAP-STACK_FRAME_OVERHEAD(r3)
PPC_STL r0,ORIG_GPR3-STACK_FRAME_OVERHEAD(r3)
PPC_STL r0,_TRAP(r3)
PPC_STL r0,ORIG_GPR3(r3)
blr

29
arch/powerpc/kernel/security.c
View File

@@ -363,26 +363,27 @@ ssize_t cpu_show_spec_store_bypass(struct device *dev, struct device_attribute *
static int ssb_prctl_get(struct task_struct *task)
{
if (stf_enabled_flush_types == STF_BARRIER_NONE)
/*
* We don't have an explicit signal from firmware that we're
* vulnerable or not, we only have certain CPU revisions that
* are known to be vulnerable.
*
* We assume that if we're on another CPU, where the barrier is
* NONE, then we are not vulnerable.
* The STF_BARRIER feature is on by default, so if it's off that means
* firmware has explicitly said the CPU is not vulnerable via either
* the hypercall or device tree.
*/
if (!security_ftr_enabled(SEC_FTR_STF_BARRIER))
return PR_SPEC_NOT_AFFECTED;
else
/*
* If we do have a barrier type then we are vulnerable. The
* barrier is not a global or per-process mitigation, so the
* only value we can report here is PR_SPEC_ENABLE, which
* appears as "vulnerable" in /proc.
* If the system's CPU has no known barrier (see setup_stf_barrier())
* then assume that the CPU is not vulnerable.
*/
if (stf_enabled_flush_types == STF_BARRIER_NONE)
return PR_SPEC_NOT_AFFECTED;
/*
* Otherwise the CPU is vulnerable. The barrier is not a global or
* per-process mitigation, so the only value that can be reported here
* is PR_SPEC_ENABLE, which appears as "vulnerable" in /proc.
*/
return PR_SPEC_ENABLE;
return -EINVAL;
}
int arch_prctl_spec_ctrl_get(struct task_struct *task, unsigned long which)

9
arch/powerpc/kernel/signal_32.c
View File

@@ -258,7 +258,8 @@ static void prepare_save_user_regs(int ctx_has_vsx_region)
#endif
}
static int __unsafe_save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
static __always_inline int
__unsafe_save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
struct mcontext __user *tm_frame, int ctx_has_vsx_region)
{
unsigned long msr = regs->msr;
@@ -358,7 +359,8 @@ static void prepare_save_tm_user_regs(void)
current->thread.ckvrsave = mfspr(SPRN_VRSAVE);
}
static int save_tm_user_regs_unsafe(struct pt_regs *regs, struct mcontext __user *frame,
static __always_inline int
save_tm_user_regs_unsafe(struct pt_regs *regs, struct mcontext __user *frame,
struct mcontext __user *tm_frame, unsigned long msr)
{
/* Save both sets of general registers */
@@ -438,7 +440,8 @@ failed:
#else
static void prepare_save_tm_user_regs(void) { }
static int save_tm_user_regs_unsafe(struct pt_regs *regs, struct mcontext __user *frame,
static __always_inline int
save_tm_user_regs_unsafe(struct pt_regs *regs, struct mcontext __user *frame,
struct mcontext __user *tm_frame, unsigned long msr)
{
return 0;

34
arch/powerpc/mm/book3s64/radix_pgtable.c
View File

@@ -764,9 +764,9 @@ static void free_pud_table(pud_t *pud_start, p4d_t *p4d)
}
static void remove_pte_table(pte_t *pte_start, unsigned long addr,
unsigned long end)
unsigned long end, bool direct)
{
unsigned long next;
unsigned long next, pages = 0;
pte_t *pte;
pte = pte_start + pte_index(addr);
@@ -788,13 +788,16 @@ static void remove_pte_table(pte_t *pte_start, unsigned long addr,
}
pte_clear(&init_mm, addr, pte);
pages++;
}
if (direct)
update_page_count(mmu_virtual_psize, -pages);
}
static void __meminit remove_pmd_table(pmd_t *pmd_start, unsigned long addr,
unsigned long end)
unsigned long end, bool direct)
{
unsigned long next;
unsigned long next, pages = 0;
pte_t *pte_base;
pmd_t *pmd;
@@ -812,19 +815,22 @@ static void __meminit remove_pmd_table(pmd_t *pmd_start, unsigned long addr,
continue;
}
pte_clear(&init_mm, addr, (pte_t *)pmd);
pages++;
continue;
}
pte_base = (pte_t *)pmd_page_vaddr(*pmd);
remove_pte_table(pte_base, addr, next);
remove_pte_table(pte_base, addr, next, direct);
free_pte_table(pte_base, pmd);
}
if (direct)
update_page_count(MMU_PAGE_2M, -pages);
}
static void __meminit remove_pud_table(pud_t *pud_start, unsigned long addr,
unsigned long end)
unsigned long end, bool direct)
{
unsigned long next;
unsigned long next, pages = 0;
pmd_t *pmd_base;
pud_t *pud;
@@ -842,16 +848,20 @@ static void __meminit remove_pud_table(pud_t *pud_start, unsigned long addr,
continue;
}
pte_clear(&init_mm, addr, (pte_t *)pud);
pages++;
continue;
}
pmd_base = pud_pgtable(*pud);
remove_pmd_table(pmd_base, addr, next);
remove_pmd_table(pmd_base, addr, next, direct);
free_pmd_table(pmd_base, pud);
}
if (direct)
update_page_count(MMU_PAGE_1G, -pages);
}
static void __meminit remove_pagetable(unsigned long start, unsigned long end)
static void __meminit remove_pagetable(unsigned long start, unsigned long end,
bool direct)
{
unsigned long addr, next;
pud_t *pud_base;
@@ -880,7 +890,7 @@ static void __meminit remove_pagetable(unsigned long start, unsigned long end)
}
pud_base = p4d_pgtable(*p4d);
remove_pud_table(pud_base, addr, next);
remove_pud_table(pud_base, addr, next, direct);
free_pud_table(pud_base, p4d);
}
@@ -903,7 +913,7 @@ int __meminit radix__create_section_mapping(unsigned long start,
int __meminit radix__remove_section_mapping(unsigned long start, unsigned long end)
{
remove_pagetable(start, end);
remove_pagetable(start, end, true);
return 0;
}
#endif /* CONFIG_MEMORY_HOTPLUG */
@@ -939,7 +949,7 @@ int __meminit radix__vmemmap_create_mapping(unsigned long start,
#ifdef CONFIG_MEMORY_HOTPLUG
void __meminit radix__vmemmap_remove_mapping(unsigned long start, unsigned long page_size)
{
remove_pagetable(start, start + page_size);
remove_pagetable(start, start + page_size, false);
}
#endif
#endif

2
arch/powerpc/mm/init_64.c
View File

@@ -188,7 +188,7 @@ static bool altmap_cross_boundary(struct vmem_altmap *altmap, unsigned long star
unsigned long nr_pfn = page_size / sizeof(struct page);
unsigned long start_pfn = page_to_pfn((struct page *)start);
if ((start_pfn + nr_pfn) > altmap->end_pfn)
if ((start_pfn + nr_pfn - 1) > altmap->end_pfn)
return true;
if (start_pfn < altmap->base_pfn)

6
arch/powerpc/platforms/powernv/pci-sriov.c
View File

@@ -600,12 +600,12 @@ static void pnv_pci_sriov_disable(struct pci_dev *pdev)
struct pnv_iov_data *iov;
iov = pnv_iov_get(pdev);
num_vfs = iov->num_vfs;
base_pe = iov->vf_pe_arr[0].pe_number;
if (WARN_ON(!iov))
return;
num_vfs = iov->num_vfs;
base_pe = iov->vf_pe_arr[0].pe_number;
/* Release VF PEs */
pnv_ioda_release_vf_PE(pdev);

2
arch/powerpc/platforms/powernv/vas-window.c
View File

@@ -1310,8 +1310,8 @@ int vas_win_close(struct vas_window *vwin)
/* if send window, drop reference to matching receive window */
if (window->tx_win) {
if (window->user_win) {
put_vas_user_win_ref(&vwin->task_ref);
mm_context_remove_vas_window(vwin->task_ref.mm);
put_vas_user_win_ref(&vwin->task_ref);
}
put_rx_win(window->rxwin);
}

2
arch/powerpc/platforms/pseries/vas.c
View File

@@ -441,8 +441,8 @@ static int vas_deallocate_window(struct vas_window *vwin)
atomic_dec(&caps->used_lpar_creds);
mutex_unlock(&vas_pseries_mutex);
put_vas_user_win_ref(&vwin->task_ref);
mm_context_remove_vas_window(vwin->task_ref.mm);
put_vas_user_win_ref(&vwin->task_ref);
kfree(win);
return 0;

2
arch/riscv/kernel/probes/uprobes.c
View File

@@ -67,6 +67,7 @@ int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
struct uprobe_task *utask = current->utask;
WARN_ON_ONCE(current->thread.bad_cause != UPROBE_TRAP_NR);
current->thread.bad_cause = utask->autask.saved_cause;
instruction_pointer_set(regs, utask->vaddr + auprobe->insn_size);
@@ -102,6 +103,7 @@ void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
{
struct uprobe_task *utask = current->utask;
current->thread.bad_cause = utask->autask.saved_cause;
/*
* Task has received a fatal signal, so reset back to probbed
* address.

6
arch/riscv/mm/init.c
View File

@@ -235,7 +235,6 @@ static void __init setup_bootmem(void)
dma_contiguous_reserve(dma32_phys_limit);
if (IS_ENABLED(CONFIG_64BIT))
hugetlb_cma_reserve(PUD_SHIFT - PAGE_SHIFT);
memblock_allow_resize();
}
#ifdef CONFIG_MMU
@@ -844,7 +843,7 @@ static void __init reserve_crashkernel(void)
*/
crash_base = memblock_phys_alloc_range(crash_size, PMD_SIZE,
search_start,
min(search_end, (unsigned long) SZ_4G));
min(search_end, (unsigned long)(SZ_4G - 1)));
if (crash_base == 0) {
/* Try again without restricting region to 32bit addressible memory */
crash_base = memblock_phys_alloc_range(crash_size, PMD_SIZE,
@@ -868,6 +867,9 @@ void __init paging_init(void)
{
setup_bootmem();
setup_vm_final();
/* Depend on that Linear Mapping is ready */
memblock_allow_resize();
}
void __init misc_mem_init(void)

5
arch/riscv/net/bpf_jit.h
View File

@@ -69,6 +69,7 @@ struct rv_jit_context {
struct bpf_prog *prog;
u16 *insns; /* RV insns */
int ninsns;
int prologue_len;
int epilogue_offset;
int *offset; /* BPF to RV */
unsigned long flags;
@@ -214,8 +215,8 @@ static inline int rv_offset(int insn, int off, struct rv_jit_context *ctx)
int from, to;
off++; /* BPF branch is from PC+1, RV is from PC */
from = (insn > 0) ? ctx->offset[insn - 1] : 0;
to = (insn + off > 0) ? ctx->offset[insn + off - 1] : 0;
from = (insn > 0) ? ctx->offset[insn - 1] : ctx->prologue_len;
to = (insn + off > 0) ? ctx->offset[insn + off - 1] : ctx->prologue_len;
return ninsns_rvoff(to - from);
}

15
arch/riscv/net/bpf_jit_core.c
View File

@@ -83,6 +83,12 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
prog = orig_prog;
goto out_offset;
}
if (build_body(ctx, extra_pass, NULL)) {
prog = orig_prog;
goto out_offset;
}
for (i = 0; i < prog->len; i++) {
prev_ninsns += 32;
ctx->offset[i] = prev_ninsns;
@@ -91,11 +97,15 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
for (i = 0; i < NR_JIT_ITERATIONS; i++) {
pass++;
ctx->ninsns = 0;
bpf_jit_build_prologue(ctx);
ctx->prologue_len = ctx->ninsns;
if (build_body(ctx, extra_pass, ctx->offset)) {
prog = orig_prog;
goto out_offset;
}
bpf_jit_build_prologue(ctx);
ctx->epilogue_offset = ctx->ninsns;
bpf_jit_build_epilogue(ctx);
@@ -154,6 +164,9 @@ skip_init_ctx:
if (!prog->is_func || extra_pass) {
bpf_jit_binary_lock_ro(jit_data->header);
for (i = 0; i < prog->len; i++)
ctx->offset[i] = ninsns_rvoff(ctx->offset[i]);
bpf_prog_fill_jited_linfo(prog, ctx->offset);
out_offset:
kfree(ctx->offset);
kfree(jit_data);

1
arch/s390/Makefile
View File

@@ -29,6 +29,7 @@ KBUILD_CFLAGS_DECOMPRESSOR += -fno-delete-null-pointer-checks -msoft-float -mbac
KBUILD_CFLAGS_DECOMPRESSOR += -fno-asynchronous-unwind-tables
KBUILD_CFLAGS_DECOMPRESSOR += -ffreestanding
KBUILD_CFLAGS_DECOMPRESSOR += -fno-stack-protector
KBUILD_CFLAGS_DECOMPRESSOR += -fPIE
KBUILD_CFLAGS_DECOMPRESSOR += $(call cc-disable-warning, address-of-packed-member)
KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_DEBUG_INFO),-g)
KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_DEBUG_INFO_DWARF4), $(call cc-option, -gdwarf-4,))

8
arch/s390/kvm/diag.c
View File

@@ -166,6 +166,7 @@ static int diag9c_forwarding_overrun(void)
static int __diag_time_slice_end_directed(struct kvm_vcpu *vcpu)
{
struct kvm_vcpu *tcpu;
int tcpu_cpu;
int tid;
tid = vcpu->run->s.regs.gprs[(vcpu->arch.sie_block->ipa & 0xf0) >> 4];
@@ -181,14 +182,15 @@ static int __diag_time_slice_end_directed(struct kvm_vcpu *vcpu)
goto no_yield;
/* target guest VCPU already running */
if (READ_ONCE(tcpu->cpu) >= 0) {
tcpu_cpu = READ_ONCE(tcpu->cpu);
if (tcpu_cpu >= 0) {
if (!diag9c_forwarding_hz || diag9c_forwarding_overrun())
goto no_yield;
/* target host CPU already running */
if (!vcpu_is_preempted(tcpu->cpu))
if (!vcpu_is_preempted(tcpu_cpu))
goto no_yield;
smp_yield_cpu(tcpu->cpu);
smp_yield_cpu(tcpu_cpu);
VCPU_EVENT(vcpu, 5,
"diag time slice end directed to %d: yield forwarded",
tid);

4
arch/s390/kvm/kvm-s390.c
View File

@@ -2030,6 +2030,10 @@ static unsigned long kvm_s390_next_dirty_cmma(struct kvm_memslots *slots,
ms = slots->memslots + slotidx;
ofs = 0;
}
if (cur_gfn < ms->base_gfn)
ofs = 0;
ofs = find_next_bit(kvm_second_dirty_bitmap(ms), ms->npages, ofs);
while ((slotidx > 0) && (ofs >= ms->npages)) {
slotidx--;

6
arch/s390/kvm/vsie.c
View File

@@ -169,7 +169,8 @@ static int setup_apcb00(struct kvm_vcpu *vcpu, unsigned long *apcb_s,
sizeof(struct kvm_s390_apcb0)))
return -EFAULT;
bitmap_and(apcb_s, apcb_s, apcb_h, sizeof(struct kvm_s390_apcb0));
bitmap_and(apcb_s, apcb_s, apcb_h,
BITS_PER_BYTE * sizeof(struct kvm_s390_apcb0));
return 0;
}
@@ -191,7 +192,8 @@ static int setup_apcb11(struct kvm_vcpu *vcpu, unsigned long *apcb_s,
sizeof(struct kvm_s390_apcb1)))
return -EFAULT;
bitmap_and(apcb_s, apcb_s, apcb_h, sizeof(struct kvm_s390_apcb1));
bitmap_and(apcb_s, apcb_s, apcb_h,
BITS_PER_BYTE * sizeof(struct kvm_s390_apcb1));
return 0;
}

37
arch/sh/drivers/dma/dma-sh.c
View File

@@ -18,6 +18,18 @@
#include <cpu/dma-register.h>
#include <cpu/dma.h>
/*
* Some of the SoCs feature two DMAC modules. In such a case, the channels are
* distributed equally among them.
*/
#ifdef SH_DMAC_BASE1
#define SH_DMAC_NR_MD_CH (CONFIG_NR_ONCHIP_DMA_CHANNELS / 2)
#else
#define SH_DMAC_NR_MD_CH CONFIG_NR_ONCHIP_DMA_CHANNELS
#endif
#define SH_DMAC_CH_SZ 0x10
/*
* Define the default configuration for dual address memory-memory transfer.
* The 0x400 value represents auto-request, external->external.
@@ -29,7 +41,7 @@ static unsigned long dma_find_base(unsigned int chan)
unsigned long base = SH_DMAC_BASE0;
#ifdef SH_DMAC_BASE1
if (chan >= 6)
if (chan >= SH_DMAC_NR_MD_CH)
base = SH_DMAC_BASE1;
#endif
@@ -40,13 +52,13 @@ static unsigned long dma_base_addr(unsigned int chan)
{
unsigned long base = dma_find_base(chan);
/* Normalize offset calculation */
if (chan >= 9)
chan -= 6;
if (chan >= 4)
base += 0x10;
chan = (chan % SH_DMAC_NR_MD_CH) * SH_DMAC_CH_SZ;
return base + (chan * 0x10);
/* DMAOR is placed inside the channel register space. Step over it. */
if (chan >= DMAOR)
base += SH_DMAC_CH_SZ;
return base + chan;
}
#ifdef CONFIG_SH_DMA_IRQ_MULTI
@@ -250,12 +262,11 @@ static int sh_dmac_get_dma_residue(struct dma_channel *chan)
#define NR_DMAOR 1
#endif
/*
* DMAOR bases are broken out amongst channel groups. DMAOR0 manages
* channels 0 - 5, DMAOR1 6 - 11 (optional).
*/
#define dmaor_read_reg(n) __raw_readw(dma_find_base((n)*6))
#define dmaor_write_reg(n, data) __raw_writew(data, dma_find_base(n)*6)
#define dmaor_read_reg(n) __raw_readw(dma_find_base((n) * \
SH_DMAC_NR_MD_CH) + DMAOR)
#define dmaor_write_reg(n, data) __raw_writew(data, \
dma_find_base((n) * \
SH_DMAC_NR_MD_CH) + DMAOR)
static inline int dmaor_reset(int no)
{

2
arch/sh/kernel/cpu/sh2/probe.c
View File

@@ -21,7 +21,7 @@ static int __init scan_cache(unsigned long node, const char *uname,
if (!of_flat_dt_is_compatible(node, "jcore,cache"))
return 0;
j2_ccr_base = (u32 __iomem *)of_flat_dt_translate_address(node);
j2_ccr_base = ioremap(of_flat_dt_translate_address(node), 4);
return 1;
}

2
arch/um/Makefile
View File

@@ -148,7 +148,7 @@ export LDFLAGS_vmlinux := $(LDFLAGS_EXECSTACK)
# When cleaning we don't include .config, so we don't include
# TT or skas makefiles and don't clean skas_ptregs.h.
CLEAN_FILES += linux x.i gmon.out
MRPROPER_FILES += arch/$(SUBARCH)/include/generated
MRPROPER_FILES += $(HOST_DIR)/include/generated
archclean:
@find . \( -name '*.bb' -o -name '*.bbg' -o -name '*.da' \

1
arch/x86/configs/gki_defconfig
View File

@@ -448,6 +448,7 @@ CONFIG_HID_WIIMOTE=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI_RENESAS=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_HCD_PLATFORM=y

Some files were not shown because too many files have changed in this diff Show More