commit abce209d18fd26e865b2406cc68819289db973f9 upstream.
Using the serio subsystem now requires the code to be reachable:
x86_64-linux-ld: drivers/platform/x86/amd/pmc.o: in function `amd_pmc_suspend_handler':
pmc.c:(.text+0x86c): undefined reference to `serio_bus'
Add the usual dependency: as other users of serio use 'select'
rather than 'depends on', use the same here.
Fixes: 8e60615e8932 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230127093950.2368575-1-arnd@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e60615e8932167057b363c11a7835da7f007106 upstream.
By default when the system is configured for low power idle in the FADT
the keyboard is set up as a wake source. This matches the behavior that
Windows uses for Modern Standby as well.
It has been reported that a variety of AMD based designs there are
spurious wakeups are happening where two IRQ sources are active.
For example:
```
PM: Triggering wakeup from IRQ 9
PM: Triggering wakeup from IRQ 1
```
In these designs IRQ 9 is the ACPI SCI and IRQ 1 is the keyboard.
One way to trigger this problem is to suspend the laptop and then unplug
the AC adapter. The SOC will be in a hardware sleep state and plugging
in the AC adapter returns control to the kernel's s2idle loop.
Normally if just IRQ 9 was active the s2idle loop would advance any EC
transactions and no other IRQ being active would cause the s2idle loop
to put the SOC back into hardware sleep state.
When this bug occurred IRQ 1 is also active even if no keyboard activity
occurred. This causes the s2idle loop to break and the system to wake.
This is a platform firmware bug triggering IRQ1 without keyboard activity.
This occurs in Windows as well, but Windows will enter "SW DRIPS" and
then with no activity enters back into "HW DRIPS" (hardware sleep state).
This issue affects Renoir, Lucienne, Cezanne, and Barcelo platforms. It
does not happen on newer systems such as Mendocino or Rembrandt.
It's been fixed in newer platform firmware. To avoid triggering the bug
on older systems check the SMU F/W version and adjust the policy at suspend
time for s2idle wakeup from keyboard on these systems. A lot of thought
and experimentation has been given around the timing of disabling IRQ1,
and to make it work the "suspend" PM callback is restored.
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2115
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1951
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230120191519.15926-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[ This has been hand modified for missing dependency commits. ]
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1921#note_1770257
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40635cd32f0d83573a558dc30e9ba3469e769249 upstream.
The amd_pmc_get_smu_version() and amd_pmc_idlemask_read() functions are
used in the probe / suspend/resume code, so they are also used when
CONFIG_DEBUGFS is disabled, move them outside of the #ifdef CONFIG_DEBUGFS
block.
Note this purely moves the code to above the #ifdef CONFIG_DEBUGFS,
the code is completely unchanged.
Fixes: f6045de1f532 ("platform/x86: amd-pmc: Export Idlemask values based on the APU")
Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Cc: Sanket Goswami <Sanket.Goswami@amd.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4b7f8febd4d9b615fbec2a06bf352b9c3729b11 upstream.
The Lenovo Legion 5 15ARH05 needs ideapad-laptop to call SALS_FNLOCK_ON /
SALS_FNLOCK_OFF on Fn-lock state change to get the LED in the Fn key to
correctly reflect the Fn-lock state.
Add a DMI match for the Legion 5 15ARH05 to the set_fn_lock_led_list[]
table for this.
Fixes: 81a5603a0f50 ("platform/x86: ideapad-laptop: Fix interrupt storm on fn-lock toggle on some Yoga laptops")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221215154357.123876-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1af7fef0d9d3fa075bf4e850f705df1fe97d33ce upstream.
Use KE_VSW instead of KE_SW for the SW_CAMERA_LENS_COVER key_entry
and get the value of the switch from the status field when handling
SW_CAMERA_LENS_COVER events, instead of always reporting 0.
Also correctly set the initial SW_CAMERA_LENS_COVER value.
Fixes: 8af9fa37b8 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221221220724.119594-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae0fa0a3126a86c801c3220fcd8eefe03aa39f3e upstream.
It is possible that we (the host/kernel driver) receive command messages
that are not intended for us. Ignore those for now.
The whole story is a bit more complicated: It is possible to enable
debug output on SAM, which is sent via SSH command messages. By default
this output is sent to a debug connector, with its own target ID
(TID=0x03). It is possible to override the target of the debug output
and set it to the host/kernel driver. This, however, does not change the
original target ID of the message. Meaning, we receive messages with
TID=0x03 (debug) but expect to only receive messages with TID=0x00
(host).
The problem is that the different target ID also comes with a different
scope of request IDs. In particular, these do not follow the standard
event rules (i.e. do not fall into a set of small reserved values).
Therefore, current message handling interprets them as responses to
pending requests and tries to match them up via the request ID. However,
these debug output messages are not in fact responses, and therefore
this will at best fail to find the request and at worst pass on the
wrong data as response for a request.
Therefore ignore any command messages not intended for us (host) for
now. We can implement support for the debug messages once we have a
better understanding of them.
Note that this may also provide a bit more stability and avoid some
driver confusion in case any other targets want to talk to us in the
future, since we don't yet know what to do with those as well. A warning
for the dropped messages should suffice for now and also give us a
chance of discovering new targets if they come along without any
potential for bugs/instabilities.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221202223327.690880-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6dc485f9940df8105ea729cbeb7a7d18d409dde5 upstream.
Unlike keys where userspace only reacts to keypresses, userspace may act
on switches in both (0 and 1) of their positions.
For example if a SW_TABLET_MODE switch is registered then GNOME will not
automatically show the onscreen keyboard when a text field gets focus on
touchscreen devices when SW_TABLET_MODE reports 0 and when SW_TABLET_MODE
reports 1 libinput will block (filter out) builtin keyboard and touchpad
events.
So to avoid unwanted side-effects EV_SW type inputs should only be
registered if they are actually present, only register SW_CAMERA_LENS_COVER
if it is actually there.
Fixes: 8af9fa37b8 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221221220724.119594-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 727cc0147f5066e359aca65cc6cc5e6d64cc15d8 ]
The ACPI buffer memory (out.pointer) returned by wmi_evaluate_method()
is not freed after the call, so it leads to memory leak.
The method results in ACPI buffer is not used, so just pass NULL to
wmi_evaluate_method() which fixes the memory leak.
Fixes: 99b38b4acc ("platform/x86: add MXM WMI driver.")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20221129011101.2042315-1-liaoyu15@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a8aadcf0b459c1257b9477fd6402e1d5952ae07 ]
`cros_typec_get_switch_handles` allocates four pointers when obtaining
type-c switch handles. These pointers are all freed if failing to obtain
any of them; therefore, pointers in `port` become stale. The stale
pointers eventually cause use-after-free or double free in later code
paths. Zeroing out all pointer fields after freeing to eliminate these
stale pointers.
Fixes: f28adb41da ("platform/chrome: cros_ec_typec: Register Type C switches")
Fixes: 1a8912caba02 ("platform/chrome: cros_ec_typec: Get retimer handle")
Signed-off-by: Victor Ding <victording@chromium.org>
Acked-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20221207093924.v2.1.I1864b6a7ee98824118b93677868d22d3750f439b@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66fe238a9bcc158f75ddecf976d1ce7efe20f713 ]
Some of the return paths for the cros_typec_get_switch_handles()
aren't necessary. Clean up the return paths to only undo the handle
get's which succeeded.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20220711072333.2064341-9-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 9a8aadcf0b45 ("platform/chrome: cros_ec_typec: zero out stale pointers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a2d96623670155d94aca72c320c0ac27bdc6bd2 ]
The following WARNING message was given when rmmod cros_usbpd_notify:
Unexpected driver unregister!
WARNING: CPU: 0 PID: 253 at drivers/base/driver.c:270 driver_unregister+0x8a/0xb0
Modules linked in: cros_usbpd_notify(-)
CPU: 0 PID: 253 Comm: rmmod Not tainted 6.1.0-rc3 #24
...
Call Trace:
<TASK>
cros_usbpd_notify_exit+0x11/0x1e [cros_usbpd_notify]
__x64_sys_delete_module+0x3c7/0x570
? __ia32_sys_delete_module+0x570/0x570
? lock_is_held_type+0xe3/0x140
? syscall_enter_from_user_mode+0x17/0x50
? rcu_read_lock_sched_held+0xa0/0xd0
? syscall_enter_from_user_mode+0x1c/0x50
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f333fe9b1b7
The reason is that the cros_usbpd_notify_init() does not check the return
value of platform_driver_register(), and the cros_usbpd_notify can
install successfully even if platform_driver_register() failed.
Fix by checking the return value of platform_driver_register() and
unregister cros_usbpd_notify_plat_driver when it failed.
Fixes: ec2daf6e33 ("platform: chrome: Add cros-usbpd-notify driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20221117080823.77549-1-yuancan@huawei.com
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b9a1dcdb6a2c841899389bf2dd7a3e0e2aa0e99 ]
Previously, `huawei_wmi_input_setup()` returned the result of
logical or-ing the return values of two functions that return negative
errno-style error codes and one that returns `acpi_status`. If this
returned value was non-zero, then it was propagated from the platform
driver's probe function. That function should return a negative
errno-style error code, so the result of the logical or that
`huawei_wmi_input_setup()` returned was not appropriate.
Fix that by checking each function separately and returning the
error code unmodified.
Fixes: 1ac9abeb2e ("platform/x86: huawei-wmi: Move to platform driver")
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20221005150032.173198-2-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81a5603a0f50fd7cf17ff21d106052215eaf2028 ]
Commit 3ae86d2d47 ("platform/x86: ideapad-laptop: Fix Legion 5 Fn lock
LED") uses the WMI event-id for the fn-lock event on some Legion 5 laptops
to manually toggle the fn-lock LED because the EC does not do it itself.
However, the same WMI ID is also sent on some Yoga laptops. Here, setting
the fn-lock state is not valid behavior, and causes the EC to spam
interrupts until the laptop is rebooted.
Add a set_fn_lock_led_list[] DMI-id list and only enable the workaround to
manually set the LED on models on this list.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=212671
Cc: Meng Dong <whenov@gmail.com>
Signed-off-by: Arnav Rawat <arnavr3@illinois.edu>
Link: https://lore.kernel.org/r/12093851.O9o76ZdvQC@fedora
[hdegoede@redhat.com: Check DMI-id list only once and store the result]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e817b889c7d8c14e7005258e15fec62edafe03c ]
Like the Acer Switch 10 (SW5-012) and Acer Switch 10 (S1003) models
the Acer Switch V 10 (SW5-017) supports reporting SW_TABLET_MODE
through acer-wmi.
Add a DMI quirk for the SW5-017 setting force_caps to ACER_CAP_KBD_DOCK
(these devices have no other acer-wmi based functionality).
Cc: Rudolf Polzer <rpolzer@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221111111639.35730-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9a477f643eb3de71fbea5ae6103b800ceb8f547 ]
Currently, we check any received packet whether we have already seen it
previously, regardless of the packet type (sequenced / unsequenced). We
do this by checking the sequence number. This assumes that sequence
numbers are valid for both sequenced and unsequenced packets. However,
this assumption appears to be incorrect.
On some devices, the sequence number field of unsequenced packets (in
particular HID input events on the Surface Pro 9) is always zero. As a
result, the current retransmission check kicks in and discards all but
the first unsequenced packet, breaking (among other things) keyboard and
touchpad input.
Note that we have, so far, only seen packets being retransmitted in
sequenced communication. In particular, this happens when there is an
ACK timeout, causing the EC (or us) to re-send the packet waiting for an
ACK. Arguably, retransmission / duplication of unsequenced packets
should not be an issue as there is no logical condition (such as an ACK
timeout) to determine when a packet should be sent again.
Therefore, remove the retransmission check for unsequenced packets
entirely to resolve the issue.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221113185951.224759-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2dbfb3f33350e1e868d3d7ed4c176d8777150878 ]
The current logic in the Intel PMC driver will forcefully attach it
when detecting any CPU on the intel_pmc_core_platform_ids array,
even if the matching ACPI device is not present.
There's no checking in pmc_core_probe() to assert that the PMC device
is present, and hence on virtualized environments the PMC device
probes successfully, even if the underlying registers are not present.
Before commit 21ae435709 ("platform/x86: intel_pmc_core: Substitute PCI
with CPUID enumeration") the driver would check for the presence of a
specific PCI device, and that prevented the driver from attaching when
running virtualized.
Fix by only forcefully attaching the PMC device when not running
virtualized. Note that virtualized platforms can still get the device
to load if the appropriate ACPI device is present on the tables
provided to the VM.
Make an exception for the Xen initial domain, which does have full
hardware access, and hence can attach to the PMC if present.
Fixes: 21ae435709 ("platform/x86: intel_pmc_core: Substitute PCI with CPUID enumeration")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221110163145.80374-1-roger.pau@citrix.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1598bfa8e1faa932de42e1ee7628a1c4c4263f0a upstream.
After upgrading BIOS to U82 01.02.01 Rev.A, the console is flooded
strange char "^@" which printed out every second and makes login
nearly impossible. Also the below messages were shown both in console
and journal/dmesg every second:
usb 1-3: Device not responding to setup address.
usb 1-3: device not accepting address 4, error -71
usb 1-3: device descriptor read/all, error -71
usb usb1-port3: unable to enumerate USB device
Wifi is soft blocked by checking rfkill. When unblocked manually,
after few seconds it would be soft blocked again. So I was suspecting
something triggered rfkill to soft block wifi. At the end it was
fixed by removing hp_wmi module.
The root cause is the way hp-wmi driver handles command 1B on
post-2009 BIOS. In pre-2009 BIOS, command 1Bh return 0x4 to indicate
that BIOS no longer controls the power for the wireless devices.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216468
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221028155527.7724-1-jorge.lopez2@hp.com
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2a2565272a3628e45d61625e36ef17af7af4e3de ]
On a MSI S270 with Fedora 37 x86_64 / systemd-251.4 the module does not
properly autoload.
This is likely caused by issues with how systemd-udevd handles the single
quote char (') which is part of the sys_vendor / chassis_vendor strings
on this laptop. As a workaround remove the single quote char + everything
behind it from the sys_vendor + chassis_vendor matches. This fixes
the module not autoloading.
Link: https://github.com/systemd/systemd/issues/24715
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220917210407.647432-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8edd2752b0aa498b3a61f3caee8f79f7e0567fad ]
cros_ec_handle_event in the cros_ec driver can notify the PM of wake
events. When a device is suspended, cros_ec_handle_event will not check
MKBP events. Instead, received MKBP events are checked during resume by
cros_ec_report_events_during_suspend. But
cros_ec_report_events_during_suspend cannot notify the PM if received
events are wake events, causing wake events to not be reported if
received while the device is suspended.
Update cros_ec_report_events_during_suspend to notify the PM of wake
events during resume by calling pm_wakeup_event.
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220913204954.2931042-1-jthies@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83ac7a1c2ed5f17caa07cbbc84bad3c05dc3bf22 ]
Commit 2cc6c71779 ("msi-laptop: Port to new backlight interface
selection API") replaced this check:
if (!quirks->old_ec_model || acpi_video_backlight_support())
pr_info("Brightness ignored, ...");
else
do_register();
With:
if (quirks->old_ec_model ||
acpi_video_get_backlight_type() == acpi_backlight_vendor)
do_register();
But since the do_register() part was part of the else branch, the entire
condition should be inverted. So not only the 2 statements on either
side of the || should be inverted, but the || itself should be replaced
with a &&.
In practice this has likely not been an issue because the new-ec models
(old_ec_model==false) likely all support ACPI video backlight control,
making acpi_video_get_backlight_type() return acpi_backlight_video
turning the second part of the || also false when old_ec_model == false.
Fixes: 2cc6c71779 ("msi-laptop: Port to new backlight interface selection API")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220825141336.208597-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ad4194d6a1e1d11b285989cd648ef695b4a93c0 ]
If chromeos_laptop_prepare_i2c_peripherals() fails after allocating memory
for 'cros_laptop->i2c_peripherals', this memory is freed at 'err_out' label
and nonzero value is returned. Then chromeos_laptop_destroy() is called,
resulting in double-free error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Fixes: 5020cd29d8 ("platform/chrome: chromeos_laptop - supply properties for ACPI devices")
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220813220843.2373004-1-subkhankulov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f74c7557ed0d321947e8bb4e9d47c1013f8b2227 upstream.
Some EC based devices (e.g. Fingerpint MCU) can jump to RO part of the
firmware (intentionally or due to device reboot). The RO part doesn't
change during the device lifecycle, so it won't support newer version
of EC_CMD_GET_NEXT_EVENT command.
Function cros_ec_query_all() is responsible for finding maximum
supported MKBP event version. It's usually called when the device is
running RW part of the firmware, so the command version can be
potentially higher than version supported by the RO.
The problem was fixed by updating maximum supported version when the
device returns EC_RES_INVALID_VERSION (mapped to -ENOPROTOOPT). That way
the kernel will use highest common version supported by RO and RW.
Fixes: 3300fdd630 ("platform/chrome: cros_ec: handle MKBP more events flag")
Cc: <stable@vger.kernel.org> # 5.10+
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220802154128.21175-1-pdk@semihalf.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c3b82d26bc85f5fc2fef5ec8cce17c89633a55a8 ]
2 keymap fixes for the Acer Aspire One AOD270 and the same hardware
rebranded as Packard Bell Dot SC:
1. The F2 key is marked with a big '?' symbol on the Packard Bell Dot SC,
this sends WMID_HOTKEY_EVENTs with a scancode of 0x27 add a mapping
for this.
2. Scancode 0x61 is KEY_SWITCHVIDEOMODE. Usually this is a duplicate
input event with the "Video Bus" input device events. But on these devices
the "Video Bus" does not send events for this key. Map 0x61 to KEY_UNKNOWN
instead of using KE_IGNORE so that udev/hwdb can override it on these devs.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220829163544.5288-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40ec787e1adf302c11668d4cc69838f4d584187d ]
The call to:
size = simple_write_to_buffer(cmdbuf, sizeof(cmdbuf), ppos, buf, size);
will succeed if at least one byte is written to the "cmdbuf" buffer.
The "*ppos" value controls which byte is written. Another problem is
that this code does not check for errors so it's possible for the entire
buffer to be uninitialized.
Inintialize the struct to zero to prevent reading uninitialized stack
data.
Debugfs is normally only writable by root so the impact of this bug is
very minimal.
Fixes: 6cca83d498 ("Platform: OLPC: move debugfs support from x86 EC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YthIKn+TfZSZMEcM@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74bb746407bf0d7c7d126c7731dbcd66d467619b ]
The last resume result exposing logic in cros_ec_sleep_event()
incorrectly requires S0ix support, which doesn't work on ARM based
systems where S0ix doesn't exist. That's because cros_ec_sleep_event()
only reports the last resume result when the EC indicates the last sleep
event was an S0ix resume. On ARM systems, the last sleep event is always
S3 resume, but the EC can still detect sleep hang events in case some
other part of the AP is blocking sleep.
Always expose the last resume result if the EC supports it so that this
works on all devices regardless of S0ix support. This fixes sleep hang
detection on ARM based chromebooks like Trogdor.
Cc: Rajat Jain <rajatja@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Fixes: 7235560ac7 ("platform/chrome: Add support for v1 of host sleep event")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220614075726.2729987-1-swboyd@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9918878676a5f9e99b98679f04b9e6c0f5426b0a ]
The driver core sets struct device->driver before calling out
to the bus' probe() method, this leaves a window where an ACPI
notify may happen on the WMI object before the driver's
probe() method has completed running, causing e.g. the
driver's notify() callback to get called with drvdata
not yet being set leading to a NULL pointer deref.
At a check for this to the WMI core, ensuring that the notify()
callback is not called before the driver is ready.
Fixes: 1686f54445 ("platform/x86: wmi: Incorporate acpi_install_notify_handler")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211128190031.405620-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
