Changes in 5.15.47
pcmcia: db1xxx_ss: restrict to MIPS_DB1XXX boards
staging: greybus: codecs: fix type confusion of list iterator variable
iio: adc: ad7124: Remove shift from scan_type
lkdtm/bugs: Check for the NULL pointer after calling kmalloc
lkdtm/bugs: Don't expect thread termination without CONFIG_UBSAN_TRAP
tty: goldfish: Use tty_port_destroy() to destroy port
tty: serial: owl: Fix missing clk_disable_unprepare() in owl_uart_probe
tty: n_tty: Restore EOF push handling behavior
serial: 8250_aspeed_vuart: Fix potential NULL dereference in aspeed_vuart_probe
tty: serial: fsl_lpuart: fix potential bug when using both of_alias_get_id and ida_simple_get
remoteproc: imx_rproc: Ignore create mem entry for resource table
usb: usbip: fix a refcount leak in stub_probe()
usb: usbip: add missing device lock on tweak configuration cmd
USB: storage: karma: fix rio_karma_init return
usb: musb: Fix missing of_node_put() in omap2430_probe
staging: fieldbus: Fix the error handling path in anybuss_host_common_probe()
pwm: lp3943: Fix duty calculation in case period was clamped
pwm: raspberrypi-poe: Fix endianness in firmware struct
rpmsg: qcom_smd: Fix irq_of_parse_and_map() return value
usb: dwc3: gadget: Replace list_for_each_entry_safe() if using giveback
usb: dwc3: pci: Fix pm_runtime_get_sync() error checking
misc: fastrpc: fix an incorrect NULL check on list iterator
firmware: stratix10-svc: fix a missing check on list iterator
usb: typec: mux: Check dev_set_name() return value
rpmsg: virtio: Fix possible double free in rpmsg_probe()
rpmsg: virtio: Fix possible double free in rpmsg_virtio_add_ctrl_dev()
rpmsg: virtio: Fix the unregistration of the device rpmsg_ctrl
iio: adc: stmpe-adc: Fix wait_for_completion_timeout return value check
iio: proximity: vl53l0x: Fix return value check of wait_for_completion_timeout
iio: adc: sc27xx: fix read big scale voltage not right
iio: adc: sc27xx: Fine tune the scale calibration values
rpmsg: qcom_smd: Fix returning 0 if irq_of_parse_and_map() fails
pvpanic: Fix typos in the comments
misc/pvpanic: Convert regular spinlock into trylock on panic path
phy: qcom-qmp: fix pipe-clock imbalance on power-on failure
power: supply: axp288_fuel_gauge: Drop BIOS version check from "T3 MRD" DMI quirk
serial: sifive: Report actual baud base rather than fixed 115200
export: fix string handling of namespace in EXPORT_SYMBOL_NS
soundwire: intel: prevent pm_runtime resume prior to system suspend
coresight: cpu-debug: Replace mutex with mutex_trylock on panic notifier
ksmbd: fix reference count leak in smb_check_perm_dacl()
extcon: ptn5150: Add queue work sync before driver release
soc: rockchip: Fix refcount leak in rockchip_grf_init
clocksource/drivers/riscv: Events are stopped during CPU suspend
ARM: dts: aspeed: ast2600-evb: Enable RX delay for MAC0/MAC1
rtc: mt6397: check return value after calling platform_get_resource()
rtc: ftrtc010: Use platform_get_irq() to get the interrupt
rtc: ftrtc010: Fix error handling in ftrtc010_rtc_probe
staging: r8188eu: add check for kzalloc
tty: n_gsm: Don't ignore write return value in gsmld_output()
tty: n_gsm: Fix packet data hex dump output
serial: meson: acquire port->lock in startup()
serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
serial: digicolor-usart: Don't allow CS5-6
serial: rda-uart: Don't allow CS5-6
serial: txx9: Don't allow CS5-6
serial: sh-sci: Don't allow CS5-6
serial: sifive: Sanitize CSIZE and c_iflag
serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
serial: stm32-usart: Correct CSIZE, bits, and parity
firmware: dmi-sysfs: Fix memory leak in dmi_sysfs_register_handle
bus: ti-sysc: Fix warnings for unbind for serial
driver: base: fix UAF when driver_attach failed
driver core: fix deadlock in __device_attach
watchdog: rti-wdt: Fix pm_runtime_get_sync() error checking
watchdog: ts4800_wdt: Fix refcount leak in ts4800_wdt_probe
blk-mq: don't touch ->tagset in blk_mq_get_sq_hctx
ASoC: fsl_sai: Fix FSL_SAI_xDR/xFR definition
clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value
s390/crypto: fix scatterwalk_unmap() callers in AES-GCM
net: sched: fixed barrier to prevent skbuff sticking in qdisc backlog
net: ethernet: mtk_eth_soc: out of bounds read in mtk_hwlro_get_fdir_entry()
net: ethernet: ti: am65-cpsw-nuss: Fix some refcount leaks
net: dsa: mv88e6xxx: Fix refcount leak in mv88e6xxx_mdios_register
modpost: fix removing numeric suffixes
jffs2: fix memory leak in jffs2_do_fill_super
ubi: fastmap: Fix high cpu usage of ubi_bgt by making sure wl_pool not empty
ubi: ubi_create_volume: Fix use-after-free when volume creation failed
selftests/bpf: fix selftest after random: Urandom_read tracepoint removal
selftests/bpf: fix stacktrace_build_id with missing kprobe/urandom_read
bpf: Fix probe read error in ___bpf_prog_run()
block: take destination bvec offsets into account in bio_copy_data_iter
riscv: read-only pages should not be writable
net/smc: fixes for converting from "struct smc_cdc_tx_pend **" to "struct smc_wr_tx_pend_priv *"
tcp: add accessors to read/set tp->snd_cwnd
nfp: only report pause frame configuration for physical device
sfc: fix considering that all channels have TX queues
sfc: fix wrong tx channel offset with efx_separate_tx_channels
block: make bioset_exit() fully resilient against being called twice
vdpa: Fix error logic in vdpa_nl_cmd_dev_get_doit
virtio: pci: Fix an error handling path in vp_modern_probe()
net/mlx5: Don't use already freed action pointer
net/mlx5e: TC NIC mode, fix tc chains miss table
net/mlx5: CT: Fix header-rewrite re-use for tupels
net/mlx5: correct ECE offset in query qp output
net/mlx5e: Update netdev features after changing XDP state
net: sched: add barrier to fix packet stuck problem for lockless qdisc
tcp: tcp_rtx_synack() can be called from process context
vdpa: ifcvf: set pci driver data in probe
octeontx2-af: fix error code in is_valid_offset()
s390/mcck: isolate SIE instruction when setting CIF_MCCK_GUEST flag
regulator: mt6315-regulator: fix invalid allowed mode
gpio: pca953x: use the correct register address to do regcache sync
afs: Fix infinite loop found by xfstest generic/676
scsi: sd: Fix potential NULL pointer dereference
tipc: check attribute length for bearer name
driver core: Fix wait_for_device_probe() & deferred_probe_timeout interaction
perf c2c: Fix sorting in percent_rmt_hitm_cmp()
dmaengine: idxd: set DMA_INTERRUPT cap bit
mips: cpc: Fix refcount leak in mips_cpc_default_phys_base
bootconfig: Make the bootconfig.o as a normal object file
tracing: Make tp_printk work on syscall tracepoints
tracing: Fix sleeping function called from invalid context on RT kernel
tracing: Avoid adding tracer option before update_tracer_options
iommu/arm-smmu: fix possible null-ptr-deref in arm_smmu_device_probe()
iommu/arm-smmu-v3: check return value after calling platform_get_resource()
f2fs: remove WARN_ON in f2fs_is_valid_blkaddr
i2c: cadence: Increase timeout per message if necessary
m68knommu: set ZERO_PAGE() to the allocated zeroed page
m68knommu: fix undefined reference to `_init_sp'
dmaengine: zynqmp_dma: In struct zynqmp_dma_chan fix desc_size data type
NFSv4: Don't hold the layoutget locks across multiple RPC calls
video: fbdev: hyperv_fb: Allow resolutions with size > 64 MB for Gen1
video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove()
RISC-V: use memcpy for kexec_file mode
m68knommu: fix undefined reference to `mach_get_rtc_pll'
f2fs: fix to tag gcing flag on page during file defragment
xprtrdma: treat all calls not a bcall when bc_serv is NULL
drm/bridge: sn65dsi83: Fix an error handling path in sn65dsi83_probe()
drm/bridge: ti-sn65dsi83: Handle dsi_lanes == 0 as invalid
netfilter: nat: really support inet nat without l3 address
netfilter: nf_tables: use kfree_rcu(ptr, rcu) to release hooks in clean_net path
netfilter: nf_tables: delete flowtable hooks via transaction list
powerpc/kasan: Force thread size increase with KASAN
SUNRPC: Trap RDMA segment overflows
netfilter: nf_tables: always initialize flowtable hook list in transaction
ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe
netfilter: nf_tables: release new hooks on unsupported flowtable flags
netfilter: nf_tables: memleak flow rule from commit path
netfilter: nf_tables: bail out early if hardware offload is not supported
xen: unexport __init-annotated xen_xlate_map_ballooned_pages()
stmmac: intel: Fix an error handling path in intel_eth_pci_probe()
af_unix: Fix a data-race in unix_dgram_peer_wake_me().
bpf, arm64: Clear prog->jited_len along prog->jited
net: dsa: lantiq_gswip: Fix refcount leak in gswip_gphy_fw_list
net/mlx4_en: Fix wrong return value on ioctl EEPROM query failure
i40e: xsk: Move tmp desc array from driver to pool
xsk: Fix handling of invalid descriptors in XSK TX batching API
SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()
net: mdio: unexport __init-annotated mdio_bus_init()
net: xfrm: unexport __init-annotated xfrm4_protocol_init()
net: ipv6: unexport __init-annotated seg6_hmac_init()
net/mlx5: Lag, filter non compatible devices
net/mlx5: Fix mlx5_get_next_dev() peer device matching
net/mlx5: Rearm the FW tracer after each tracer event
net/mlx5: fs, fail conflicting actions
ip_gre: test csum_start instead of transport header
net: altera: Fix refcount leak in altera_tse_mdio_create
net: dsa: mv88e6xxx: use BMSR_ANEGCOMPLETE bit for filling an_complete
tcp: use alloc_large_system_hash() to allocate table_perturb
drm: imx: fix compiler warning with gcc-12
nfp: flower: restructure flow-key for gre+vlan combination
iov_iter: Fix iter_xarray_get_pages{,_alloc}()
iio: dummy: iio_simple_dummy: check the return value of kstrdup()
staging: rtl8712: fix a potential memory leak in r871xu_drv_init()
iio: st_sensors: Add a local lock for protecting odr
lkdtm/usercopy: Expand size of "out of frame" object
drivers: staging: rtl8723bs: Fix deadlock in rtw_surveydone_event_callback()
drivers: staging: rtl8192bs: Fix deadlock in rtw_joinbss_event_prehandle()
tty: synclink_gt: Fix null-pointer-dereference in slgt_clean()
tty: Fix a possible resource leak in icom_probe
thunderbolt: Use different lane for second DisplayPort tunnel
drivers: staging: rtl8192u: Fix deadlock in ieee80211_beacons_stop()
drivers: staging: rtl8192e: Fix deadlock in rtllib_beacons_stop()
USB: host: isp116x: check return value after calling platform_get_resource()
drivers: tty: serial: Fix deadlock in sa1100_set_termios()
drivers: usb: host: Fix deadlock in oxu_bus_suspend()
USB: hcd-pci: Fully suspend across freeze/thaw cycle
char: xillybus: fix a refcount leak in cleanup_dev()
sysrq: do not omit current cpu when showing backtrace of all active CPUs
usb: dwc2: gadget: don't reset gadget's driver->bus
soundwire: qcom: adjust autoenumeration timeout
misc: rtsx: set NULL intfdata when probe fails
extcon: Fix extcon_get_extcon_dev() error handling
extcon: Modify extcon device to be created after driver data is set
clocksource/drivers/sp804: Avoid error on multiple instances
staging: rtl8712: fix uninit-value in usb_read8() and friends
staging: rtl8712: fix uninit-value in r871xu_drv_init()
serial: msm_serial: disable interrupts in __msm_console_write()
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
watchdog: wdat_wdt: Stop watchdog when rebooting the system
md: protect md_unregister_thread from reentrancy
scsi: myrb: Fix up null pointer access on myrb_cleanup()
Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process"
ceph: allow ceph.dir.rctime xattr to be updatable
ceph: flush the mdlog for filesystem sync
drm/amd/display: Check if modulo is 0 before dividing.
drm/radeon: fix a possible null pointer dereference
drm/amd/pm: Fix missing thermal throttler status
um: line: Use separate IRQs per line
modpost: fix undefined behavior of is_arm_mapping_symbol()
x86/cpu: Elide KCSAN for cpu_has() and friends
jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds
nbd: call genl_unregister_family() first in nbd_cleanup()
nbd: fix race between nbd_alloc_config() and module removal
nbd: fix io hung while disconnecting device
s390/gmap: voluntarily schedule during key setting
cifs: version operations for smb20 unneeded when legacy support disabled
drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate
nodemask: Fix return values to be unsigned
vringh: Fix loop descriptors check in the indirect cases
scripts/gdb: change kernel config dumping method
ALSA: usb-audio: Skip generic sync EP parse for secondary EP
ALSA: usb-audio: Set up (implicit) sync for Saffire 6
ALSA: hda/conexant - Fix loopback issue with CX20632
ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo Yoga DuetITL 2021
ALSA: hda/realtek: Add quirk for HP Dev One
cifs: return errors during session setup during reconnects
cifs: fix reconnect on smb3 mount types
KEYS: trusted: tpm2: Fix migratable logic
ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files
mmc: block: Fix CQE recovery reset success
net: phy: dp83867: retrigger SGMII AN when link change
net: openvswitch: fix misuse of the cached connection on tuple changes
writeback: Fix inode->i_io_list not be protected by inode->i_lock error
nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION
nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling
nfc: st21nfca: fix incorrect sizing calculations in EVT_TRANSACTION
ixgbe: fix bcast packets Rx on VF after promisc removal
ixgbe: fix unexpected VLAN Rx in promisc mode on VF
Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag
vduse: Fix NULL pointer dereference on sysfs access
powerpc: Don't select HAVE_IRQ_EXIT_ON_IRQ_STACK
drm/bridge: analogix_dp: Support PSR-exit to disable transition
drm/atomic: Force bridge self-refresh-exit on CRTC switch
drm/amdgpu: update VCN codec support for Yellow Carp
powerpc/32: Fix overread/overwrite of thread_struct via ptrace
powerpc/mm: Switch obsolete dssall to .long
drm/ast: Create threshold values for AST2600
random: avoid checking crng_ready() twice in random_init()
random: mark bootloader randomness code as __init
random: account for arch randomness in bits
md/raid0: Ignore RAID0 layout if the second zone has only one device
net/sched: act_police: more accurate MTU policing
PCI: qcom: Fix pipe clock imbalance
zonefs: fix handling of explicit_open option on mount
iov_iter: fix build issue due to possible type mis-match
dmaengine: idxd: add missing callback function to support DMA_INTERRUPT
tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd
xsk: Fix possible crash when multiple sockets are created
Linux 5.15.47
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I4f53567cd8a0a13927a16f41a2be8bc0db21ce5b
Steps on the way to 5.15-rc1
Resolves merge conflicts in:
drivers/misc/Makefile
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I102636df13eb6320bb7ad739cbb4b82084fe078e
- Add the hook to provide additional information
of sysrq crash.
Bug: 170234110
Signed-off-by: Sangmoon Kim <sangmoon.kim@samsung.com>
Change-Id: Ib8f14eaa639b2ef959e911d611515868ff9f193d
(cherry picked from commit 32b242337266a3b8e170b0ddc4bec478d5cf1f94)
We can also thaw non-block file systems. Remove the CONFIG_BLOCK in
sysrq.c after making the prototype available unconditionally.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Many embedded boards have a disconnected TTL level serial which can
generate some garbage that can lead to spurious false sysrq detects.
Currently, sysrq can be either completely disabled for serial console
or always disabled (with CONFIG_MAGIC_SYSRQ_SERIAL), since
commit 732dbf3a61 ("serial: do not accept sysrq characters via serial port")
At Arista, we have such boards that can generate BREAK and random
garbage. While disabling sysrq for serial console would solve
the problem with spurious false sysrq triggers, it's also desirable
to have a way to enable sysrq back.
Having the way to enable sysrq was beneficial to debug lockups with
a manual investigation in field and on the other side preventing false
sysrq detections.
As a preparation to add sysrq_toggle_support() call into uart,
remove a private copy of sysrq_enabled from sysctl - it should reflect
the actual status of sysrq.
Furthermore, the private copy isn't correct already in case
sysrq_always_enabled is true. So, remove __sysrq_enabled and use a
getter-helper sysrq_mask() to check sysrq_key_op enabled status.
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20200302175135.269397-2-dima@arista.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysrq_toggle_support() can be called in parallel, in return calling
input_(un)register_handler(), which fortunately is safe to call
in parallel and regardless of registered/unregistered status of
sysrq_handler.
Remove sysrq_handler_registered as it doesn't have any function there
and may confuse reader about possible race.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20191213000657.931618-2-dima@arista.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When kernel panic happens, it will first print the panic call stack,
then the ending msg like:
[ 35.743249] ---[ end Kernel panic - not syncing: Fatal exception
[ 35.749975] ------------[ cut here ]------------
The above message are very useful for debugging.
But if system is configured to not reboot on panic, say the
"panic_timeout" parameter equals 0, it will likely print out many noisy
message like WARN() call stack for each and every CPU except the panic
one, messages like below:
WARNING: CPU: 1 PID: 280 at kernel/sched/core.c:1198 set_task_cpu+0x183/0x190
Call Trace:
<IRQ>
try_to_wake_up
default_wake_function
autoremove_wake_function
__wake_up_common
__wake_up_common_lock
__wake_up
wake_up_klogd_work_func
irq_work_run_list
irq_work_tick
update_process_times
tick_sched_timer
__hrtimer_run_queues
hrtimer_interrupt
smp_apic_timer_interrupt
apic_timer_interrupt
For people working in console mode, the screen will first show the panic
call stack, but immediately overridden by these noisy extra messages,
which makes debugging much more difficult, as the original context gets
lost on screen.
Also these noisy messages will confuse some users, as I have seen many bug
reporters posted the noisy message into bugzilla, instead of the real
panic call stack and context.
Adding a flag "suppress_printk" which gets set in panic() to avoid those
noisy messages, without changing current kernel behavior that both panic
blinking and sysrq magic key can work as is, suggested by Petr Mladek.
To verify this, make sure kernel is not configured to reboot on panic and
in console
# echo c > /proc/sysrq-trigger
to see if console only prints out the panic call stack.
Link: http://lkml.kernel.org/r/1551430186-24169-1-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Systems which don't provide arch_trigger_cpumask_backtrace() will
invoke showacpu() from a smp_call_function() function which is invoked
with disabled interrupts even on -RT systems.
The function acquires the show_lock lock which only purpose is to
ensure that the CPUs don't print simultaneously. Otherwise the
output would clash and it would be hard to tell the output from CPUx
apart from CPUy.
On -RT the spin_lock() can not be acquired from this context. A
raw_spin_lock() is required. It will introduce the system's latency
by performing the sysrq request and other CPUs will block on the lock
until the request is done. This is okay because the user asked for a
backtrace of all active CPUs and under "normal circumstances in
production" this path should not be triggered.
Signed-off-by: Julien Grall <julien.grall@arm.com>
[bigeasy@linuxtronix.de: commit description]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 97f5f0cd8c ("Input: implement SysRq as a separate input
handler") added pr_fmt() definition. It caused a duplicated message
prefix in the sysrq header messages, for example:
[ 177.053931] sysrq: SysRq : Show backtrace of all active CPUs
[ 742.864776] sysrq: SysRq : HELP : loglevel(0-9) reboot(b) crash(c)
Fixes: 97f5f0cd8c ("Input: implement SysRq as a separate input handler")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysrq header line is printed with an increased loglevel
to provide users some positive feedback.
The original loglevel is not restored when the sysrq operation
is disabled. This bug was introduced in 2.6.12 (pre-git-history)
by the commit ("Allow admin to enable only some of the Magic-Sysrq
functions").
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysrq_do_reset() is called in softirq context, so it cannot call
sync() directly. Instead, call orderly_reboot(), which creates a work
item to run /sbin/reboot, or do emergency_sync and restart if the
command fails.
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysrq_handle_crash() currently forces a crash by dereferencing a
NULL pointer, which is undefined behavior in C. Just call panic()
instead, which is simpler and doesn't depend on compiler specific
handling of the undefined behavior.
Remove the comment on why the RCU lock needs to be released, it isn't
accurate anymore since the crash now isn't handled by the page fault
handler (for reference: the comment was added by commit 984cf355ae
("sysrq: Fix warning in sysrq generated crash.")). Releasing the lock
is still good practice though.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.
bl_idle_init() doesn't do that, so fix it.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that send_signal always delivers SEND_SIG_PRIV signals to a pid
namespace init it is no longer necessary to use SEND_SIG_FORCED when
calling do_send_sig_info to ensure that pid namespace inits are
signaled and possibly killed. Using SEND_SIG_PRIV is sufficient.
So use SEND_SIG_PRIV so that userspace when it receives a SIGTERM can
tell that the kernel sent the signal and not some random userspace
application.
Fixes: b82c32872d ("sysrq: use SEND_SIG_FORCED instead of force_sig()")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This passes the information we already have at the call sight into
do_send_sig_info. Ultimately allowing for better handling of signals
sent to a group of processes during fork.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Using this helper allows us to avoid the in-kernel calls to the
sys_sync() syscall. The ksys_ prefix denotes that this function
is meant as a drop-in replacement for the syscall. In particular, it
uses the same calling convention as sys_sync().
This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Pull tty/serial updates from Greg KH:
"Here is the big tty/serial driver pull request for 4.15-rc1.
Lots of serial driver updates in here, some small vt cleanups, and a
raft of SPDX and license boilerplate cleanups, messing up the diffstat
a bit.
Nothing major, with no realy functional changes except better hardware
support for some platforms.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (110 commits)
tty: ehv_bytechan: fix spelling mistake
tty: serial: meson: allow baud-rates lower than 9600
serial: 8250_fintek: Fix crash with baud rate B0
serial: 8250_fintek: Disable delays for ports != 0
serial: 8250_fintek: Return -EINVAL on invalid configuration
tty: Remove redundant license text
tty: serdev: Remove redundant license text
tty: hvc: Remove redundant license text
tty: serial: Remove redundant license text
tty: add SPDX identifiers to all remaining files in drivers/tty/
tty: serial: jsm: remove redundant pointer ts
tty: serial: jsm: add space before the open parenthesis '('
tty: serial: jsm: fix coding style
tty: serial: jsm: delete space between function name and '('
tty: serial: jsm: add blank line after declarations
tty: serial: jsm: change the type of local variable
tty: serial: imx: remove dead code imx_dma_rxint
tty: serial: imx: disable ageing timer interrupt if dma in use
serial: 8250: fix potential deadlock in rs485-mode
serial: m32r_sio: Drop redundant .data assignment
...
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When kernel configuration SMP,PREEMPT and DEBUG_PREEMPT are enabled,
echo 1 >/proc/sys/kernel/sysrq
echo p >/proc/sysrq-trigger
kernel will print call trace as below:
sysrq: SysRq : Show Regs
BUG: using __this_cpu_read() in preemptible [00000000] code: sh/435
caller is __this_cpu_preempt_check+0x18/0x20
Call trace:
[<ffffff8008088e80>] dump_backtrace+0x0/0x1d0
[<ffffff8008089074>] show_stack+0x24/0x30
[<ffffff8008447970>] dump_stack+0x90/0xb0
[<ffffff8008463950>] check_preemption_disabled+0x100/0x108
[<ffffff8008463998>] __this_cpu_preempt_check+0x18/0x20
[<ffffff80084c9194>] sysrq_handle_showregs+0x1c/0x40
[<ffffff80084c9c7c>] __handle_sysrq+0x12c/0x1a0
[<ffffff80084ca140>] write_sysrq_trigger+0x60/0x70
[<ffffff8008251e00>] proc_reg_write+0x90/0xd0
[<ffffff80081f1788>] __vfs_write+0x48/0x90
[<ffffff80081f241c>] vfs_write+0xa4/0x190
[<ffffff80081f3354>] SyS_write+0x54/0xb0
[<ffffff80080833f0>] el0_svc_naked+0x24/0x28
This can be seen on a common board like an r-pi3.
This happens because when echo p >/proc/sysrq-trigger,
get_irq_regs() is called outside of IRQ context,
if preemption is enabled in this situation,kernel will
print the call trace. Since many prior discussions on
the mailing lists have made it clear that get_irq_regs
either just returns NULL or stale data when used outside
of IRQ context,we simply avoid calling it outside of
IRQ context.
Signed-off-by: Jibin Xu <jibin.xu@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuo has reported that sysrq triggered OOM killer will print a
misleading information when no tasks are selected:
sysrq: SysRq : Manual OOM execution
Out of memory: Kill process 4468 ((agetty)) score 0 or sacrifice child
Killed process 4468 ((agetty)) total-vm:43704kB, anon-rss:1760kB, file-rss:0kB, shmem-rss:0kB
sysrq: SysRq : Manual OOM execution
Out of memory: Kill process 4469 (systemd-cgroups) score 0 or sacrifice child
Killed process 4469 (systemd-cgroups) total-vm:10704kB, anon-rss:120kB, file-rss:0kB, shmem-rss:0kB
sysrq: SysRq : Manual OOM execution
sysrq: OOM request ignored because killer is disabled
sysrq: SysRq : Manual OOM execution
sysrq: OOM request ignored because killer is disabled
sysrq: SysRq : Manual OOM execution
sysrq: OOM request ignored because killer is disabled
The real reason is that there are no eligible tasks for the OOM killer
to select but since commit 7c5f64f844 ("mm: oom: deduplicate victim
selection code for memcg and global oom") the semantic of out_of_memory
has changed without updating moom_callback.
This patch updates moom_callback to tell that no task was eligible which
is the case for both oom killer disabled and no eligible tasks. In
order to help distinguish first case from the second add printk to both
oom_killer_{enable,disable}. This information is useful on its own
because it might help debugging potential memory allocation failures.
Fixes: 7c5f64f844 ("mm: oom: deduplicate victim selection code for memcg and global oom")
Link: http://lkml.kernel.org/r/20170404134705.6361-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit d6580a9f15 ("kexec: sysrq: simplify sysrq-c handler"),
the sysrq handler for the 'c' key has been sysrq_crash_op. Debugging
code in the ibm_emac driver also tries to register a handler for the 'c'
key, but this has no effect because register_sysrq_key() doesn't replace
existing handlers. Since evidently no one has cared enough to fix this
in the last 8 years, and it's very rare for drivers to register sysrq
handlers (for good reason), just remove the dead code.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are going to split <linux/sched/task.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/task.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/debug.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
show_mem() allows to filter out node specific data which is irrelevant
to the allocation request via SHOW_MEM_FILTER_NODES. The filtering is
done in skip_free_areas_node which skips all nodes which are not in the
mems_allowed of the current process. This works most of the time as
expected because the nodemask shouldn't be outside of the allocating
task but there are some exceptions. E.g. memory hotplug might want to
request allocations from outside of the allowed nodes (see
new_node_page).
Get rid of this hardcoded behavior and push the allocation mask down the
show_mem path and use it instead of cpuset_current_mems_allowed. NULL
nodemask is interpreted as cpuset_current_mems_allowed.
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170117091543.25850-5-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The sysrq input handler should be attached to the input device which has
a left alt key.
On 32-bit kernels, some input devices which has a left alt key cannot
attach sysrq handler. Because the keybit bitmap in struct input_device_id
for sysrq is not correctly initialized. KEY_LEFTALT is 56 which is
greater than BITS_PER_LONG on 32-bit kernels.
I found this problem when using a matrix keypad device which defines
a KEY_LEFTALT (56) but doesn't have a KEY_O (24 == 56%32).
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 984d74a720 ("sysrq: rcu-ify __handle_sysrq") replaced
spin_lock_irqsave() calls with rcu_read_lock() calls in sysrq. Since
rcu_read_lock() does not disable preemption, faulthandler_disabled() in
__do_page_fault() in x86/fault.c returns false. When the code later calls
might_sleep() in the pagefault handler, we get the following warning:
BUG: sleeping function called from invalid context at ../arch/x86/mm/fault.c:1187
in_atomic(): 0, irqs_disabled(): 0, pid: 4706, name: bash
Preemption disabled at:[<ffffffff81484339>] printk+0x48/0x4a
To fix this, we release the RCU read lock before we crash.
Tested this patch on linux 3.18 by booting off one of our boards.
Fixes: 984d74a720 ("sysrq: rcu-ify __handle_sysrq")
Signed-off-by: Ani Sinha <ani@arista.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The Kconfig currently controlling compilation of this code is:
config.debug:config MAGIC_SYSRQ
bool "Magic SysRq key"
...meaning that it currently is not being built as a module by anyone.
Lets remove the traces of modularity we can so that when reading the
driver there is less doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
We don't delete the module.h include since other parts of the file are
using content from there.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The force_kill member of struct oom_control isn't needed if an order of -1
is used instead. This is the same as order == -1 in struct
compact_control which requires full memory compaction.
This patch introduces no functional change.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are essential elements to an oom context that are passed around to
multiple functions.
Organize these elements into a new struct, struct oom_control, that
specifies the context for an oom condition.
This patch introduces no functional change.
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull module updates from Rusty Russell:
"Main excitement here is Peter Zijlstra's lockless rbtree optimization
to speed module address lookup. He found some abusers of the module
lock doing that too.
A little bit of parameter work here too; including Dan Streetman's
breaking up the big param mutex so writing a parameter can load
another module (yeah, really). Unfortunately that broke the usual
suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were
appended too"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits)
modules: only use mod->param_lock if CONFIG_MODULES
param: fix module param locks when !CONFIG_SYSFS.
rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE()
module: add per-module param_lock
module: make perm const
params: suppress unused variable error, warn once just in case code changes.
modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'.
kernel/module.c: avoid ifdefs for sig_enforce declaration
kernel/workqueue.c: remove ifdefs over wq_power_efficient
kernel/params.c: export param_ops_bool_enable_only
kernel/params.c: generalize bool_enable_only
kernel/module.c: use generic module param operaters for sig_enforce
kernel/params: constify struct kernel_param_ops uses
sysfs: tightened sysfs permission checks
module: Rework module_addr_{min,max}
module: Use __module_address() for module_address_lookup()
module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING
module: Optimize __module_address() using a latched RB-tree
rbtree: Implement generic latch_tree
seqlock: Introduce raw_read_seqcount_latch()
...
Pull MIPS updates from Ralf Baechle:
- Improvements to the tlb_dump code
- KVM fixes
- Add support for appended DTB
- Minor improvements to the R12000 support
- Minor improvements to the R12000 support
- Various platform improvments for BCM47xx
- The usual pile of minor cleanups
- A number of BPF fixes and improvments
- Some improvments to the support for R3000 and DECstations
- Some improvments to the ATH79 platform support
- A major patchset for the JZ4740 SOC adding support for the CI20 platform
- Add support for the Pistachio SOC
- Minor BMIPS/BCM63xx platform support improvments.
- Avoid "SYNC 0" as memory barrier when unlocking spinlocks
- Add support for the XWR-1750 board.
- Paul's __cpuinit/__cpuinitdata cleanups.
- New Malta CPU board support large memory so enable ZONE_DMA32.
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits)
MIPS: spinlock: Adjust arch_spin_lock back-off time
MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA
MIPS: BCM47xx: Simplify handling SPROM revisions
MIPS: Cobalt Don't use module_init in non-modular MTD registration.
MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/
MIPS: use for_each_sg()
MIPS: BCM47xx: Don't select BCMA_HOST_PCI
MIPS: BCM47xx: Add helper variable for storing NVRAM length
MIPS: IRQ/IP27: Move IRQ allocation API to platform code.
MIPS: Replace smp_mb with release barrier function in unlocks.
MIPS: i8259: DT support
MIPS: Malta: Basic DT plumbing
MIPS: include errno.h for ENODEV in mips-cm.h
MIPS: Define GCR_GIC_STATUS register fields
MIPS: BPF: Introduce BPF ASM helpers
MIPS: BPF: Use BPF register names to describe the ABI
MIPS: BPF: Move register definition to the BPF header
MIPS: net: BPF: Replace RSIZE with SZREG
MIPS: BPF: Free up some callee-saved registers
MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers
...
Merge first patchbomb from Andrew Morton:
- a few misc things
- ocfs2 udpates
- kernel/watchdog.c feature work (took ages to get right)
- most of MM. A few tricky bits are held up and probably won't make 4.2.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (91 commits)
mm: kmemleak_alloc_percpu() should follow the gfp from per_alloc()
mm, thp: respect MPOL_PREFERRED policy with non-local node
tmpfs: truncate prealloc blocks past i_size
mm/memory hotplug: print the last vmemmap region at the end of hot add memory
mm/mmap.c: optimization of do_mmap_pgoff function
mm: kmemleak: optimise kmemleak_lock acquiring during kmemleak_scan
mm: kmemleak: avoid deadlock on the kmemleak object insertion error path
mm: kmemleak: do not acquire scan_mutex in kmemleak_do_cleanup()
mm: kmemleak: fix delete_object_*() race when called on the same memory block
mm: kmemleak: allow safe memory scanning during kmemleak disabling
memcg: convert mem_cgroup->under_oom from atomic_t to int
memcg: remove unused mem_cgroup->oom_wakeups
frontswap: allow multiple backends
x86, mirror: x86 enabling - find mirrored memory ranges
mm/memblock: allocate boot time data structures from mirrored memory
mm/memblock: add extra "flags" to memblock to allow selection of memory based on attribute
mm: do not ignore mapping_gfp_mask in page cache allocation paths
mm/cma.c: fix typos in comments
mm/oom_kill.c: print points as unsigned int
mm/hugetlb: handle races in alloc_huge_page and hugetlb_reserve_pages
...
Pull input subsystem updates from Dmitry Torokhov:
"Thanks to Samuel Thibault input device (keyboard) LEDs are no longer
hardwired within the input core but use LED subsystem and so allow use
of different triggers; Hans de Goede did a large update for the ALPS
touchpad driver; we have new TI drv2665 haptics driver and DA9063
OnKey driver, and host of other drivers got various fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (55 commits)
Input: pixcir_i2c_ts - fix receive error
MAINTAINERS: remove non existent input mt git tree
Input: improve usage of gpiod API
tty/vt/keyboard: define LED triggers for VT keyboard lock states
tty/vt/keyboard: define LED triggers for VT LED states
Input: export LEDs as class devices in sysfs
Input: cyttsp4 - use swap() in cyttsp4_get_touch()
Input: goodix - do not explicitly set evbits in input device
Input: goodix - export id and version read from device
Input: goodix - fix variable length array warning
Input: goodix - fix alignment issues
Input: add OnKey driver for DA9063 MFD part
Input: elan_i2c - add product IDs FW names
Input: elan_i2c - add support for multi IC type and iap format
Input: focaltech - report finger width to userspace
tty: remove platform_sysrq_reset_seq
Input: synaptics_i2c - use proper boolean values
Input: psmouse - use true instead of 1 for boolean values
Input: cyapa - fix a few typos in comments
Input: stmpe-ts - enforce device tree only mode
...
