Changes in 5.15.75
Revert "fs: check FMODE_LSEEK to control internal pipe splicing"
ALSA: oss: Fix potential deadlock at unregistration
ALSA: rawmidi: Drop register_mutex in snd_rawmidi_free()
ALSA: usb-audio: Fix potential memory leaks
ALSA: usb-audio: Fix NULL dererence at error path
ALSA: hda/realtek: remove ALC289_FIXUP_DUAL_SPK for Dell 5530
ALSA: hda/realtek: Correct pin configs for ASUS G533Z
ALSA: hda/realtek: Add quirk for ASUS GV601R laptop
ALSA: hda/realtek: Add Intel Reference SSID to support headset keys
mtd: rawnand: atmel: Unmap streaming DMA mappings
io_uring/net: don't update msg_name if not provided
hv_netvsc: Fix race between VF offering and VF association message from host
cifs: destage dirty pages before re-reading them for cache=none
cifs: Fix the error length of VALIDATE_NEGOTIATE_INFO message
iio: dac: ad5593r: Fix i2c read protocol requirements
iio: ltc2497: Fix reading conversion results
iio: adc: ad7923: fix channel readings for some variants
iio: pressure: dps310: Refactor startup procedure
iio: pressure: dps310: Reset chip after timeout
xhci: dbc: Fix memory leak in xhci_alloc_dbc()
usb: add quirks for Lenovo OneLink+ Dock
can: kvaser_usb: Fix use of uninitialized completion
can: kvaser_usb_leaf: Fix overread with an invalid command
can: kvaser_usb_leaf: Fix TX queue out of sync after restart
can: kvaser_usb_leaf: Fix CAN state after restart
mmc: sdhci-sprd: Fix minimum clock limit
i2c: designware: Fix handling of real but unexpected device interrupts
fs: dlm: fix race between test_bit() and queue_work()
fs: dlm: handle -EBUSY first in lock arg validation
HID: multitouch: Add memory barriers
quota: Check next/prev free block number after reading from quota file
platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure
ASoC: wcd9335: fix order of Slimbus unprepare/disable
ASoC: wcd934x: fix order of Slimbus unprepare/disable
hwmon: (gsc-hwmon) Call of_node_get() before of_find_xxx API
net: thunderbolt: Enable DMA paths only after rings are enabled
regulator: qcom_rpm: Fix circular deferral regression
arm64: topology: move store_cpu_topology() to shared code
riscv: topology: fix default topology reporting
RISC-V: Make port I/O string accessors actually work
parisc: fbdev/stifb: Align graphics memory size to 4MB
riscv: Allow PROT_WRITE-only mmap()
riscv: Make VM_WRITE imply VM_READ
riscv: always honor the CONFIG_CMDLINE_FORCE when parsing dtb
riscv: Pass -mno-relax only on lld < 15.0.0
UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
nvmem: core: Fix memleak in nvmem_register()
nvme-multipath: fix possible hang in live ns resize with ANA access
nvme-pci: set min_align_mask before calculating max_hw_sectors
Revert "drm/amdgpu: use dirty framebuffer helper"
dmaengine: mxs: use platform_driver_register
drm/virtio: Check whether transferred 2D BO is shmem
drm/virtio: Unlock reservations on virtio_gpu_object_shmem_init() error
drm/virtio: Use appropriate atomic state in virtio_gpu_plane_cleanup_fb()
drm/udl: Restore display mode on resume
arm64: errata: Add Cortex-A55 to the repeat tlbi list
mm/damon: validate if the pmd entry is present before accessing
mm/mmap: undo ->mmap() when arch_validate_flags() fails
xen/gntdev: Prevent leaking grants
xen/gntdev: Accommodate VMA splitting
PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridge
serial: 8250: Let drivers request full 16550A feature probing
serial: 8250: Request full 16550A feature probing for OxSemi PCIe devices
NFSD: Protect against send buffer overflow in NFSv3 READDIR
NFSD: Protect against send buffer overflow in NFSv2 READ
NFSD: Protect against send buffer overflow in NFSv3 READ
powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain
powerpc/boot: Explicitly disable usage of SPE instructions
slimbus: qcom-ngd: use correct error in message of pdr_add_lookup() failure
slimbus: qcom-ngd: cleanup in probe error path
scsi: qedf: Populate sysfs attributes for vport
gpio: rockchip: request GPIO mux to pinctrl when setting direction
pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback
fbdev: smscufx: Fix use-after-free in ufx_ops_open()
ksmbd: fix endless loop when encryption for response fails
ksmbd: Fix wrong return value and message length check in smb2_ioctl()
ksmbd: Fix user namespace mapping
fs: record I_DIRTY_TIME even if inode already has I_DIRTY_INODE
btrfs: fix race between quota enable and quota rescan ioctl
btrfs: set generation before calling btrfs_clean_tree_block in btrfs_init_new_buffer
f2fs: complete checkpoints during remount
f2fs: flush pending checkpoints when freezing super
f2fs: increase the limit for reserve_root
f2fs: fix to do sanity check on destination blkaddr during recovery
f2fs: fix to do sanity check on summary info
hardening: Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO
hardening: Remove Clang's enable flag for -ftrivial-auto-var-init=zero
jbd2: wake up journal waiters in FIFO order, not LIFO
jbd2: fix potential buffer head reference count leak
jbd2: fix potential use-after-free in jbd2_fc_wait_bufs
jbd2: add miss release buffer head in fc_do_one_pass()
ext4: avoid crash when inline data creation follows DIO write
ext4: fix null-ptr-deref in ext4_write_info
ext4: make ext4_lazyinit_thread freezable
ext4: fix check for block being out of directory size
ext4: don't increase iversion counter for ea_inodes
ext4: ext4_read_bh_lock() should submit IO if the buffer isn't uptodate
ext4: place buffer head allocation before handle start
ext4: fix dir corruption when ext4_dx_add_entry() fails
ext4: fix miss release buffer head in ext4_fc_write_inode
ext4: fix potential memory leak in ext4_fc_record_modified_inode()
ext4: fix potential memory leak in ext4_fc_record_regions()
ext4: update 'state->fc_regions_size' after successful memory allocation
livepatch: fix race between fork and KLP transition
ftrace: Properly unset FTRACE_HASH_FL_MOD
ring-buffer: Allow splice to read previous partially read pages
ring-buffer: Have the shortest_full queue be the shortest not longest
ring-buffer: Check pending waiters when doing wake ups as well
ring-buffer: Add ring_buffer_wake_waiters()
ring-buffer: Fix race between reset page and reading page
tracing: Disable interrupt or preemption before acquiring arch_spinlock_t
tracing: Wake up ring buffer waiters on closing of the file
tracing: Wake up waiters when tracing is disabled
tracing: Add ioctl() to force ring buffer waiters to wake up
tracing: Move duplicate code of trace_kprobe/eprobe.c into header
tracing: Add "(fault)" name injection to kernel probes
tracing: Fix reading strings from synthetic events
thunderbolt: Explicitly enable lane adapter hotplug events at startup
efi: libstub: drop pointless get_memory_map() call
media: cedrus: Set the platform driver data earlier
media: cedrus: Fix endless loop in cedrus_h265_skip_bits()
blk-wbt: call rq_qos_add() after wb_normal is initialized
KVM: x86/emulator: Fix handing of POP SS to correctly set interruptibility
KVM: nVMX: Unconditionally purge queued/injected events on nested "exit"
KVM: nVMX: Don't propagate vmcs12's PERF_GLOBAL_CTRL settings to vmcs02
KVM: VMX: Drop bits 31:16 when shoving exception error code into VMCS
staging: greybus: audio_helper: remove unused and wrong debugfs usage
drm/nouveau/kms/nv140-: Disable interlacing
drm/nouveau: fix a use-after-free in nouveau_gem_prime_import_sg_table()
drm/i915: Fix watermark calculations for gen12+ RC CCS modifier
drm/i915: Fix watermark calculations for gen12+ MC CCS modifier
drm/i915: Fix watermark calculations for gen12+ CCS+CC modifier
drm/amd/display: Fix vblank refcount in vrr transition
smb3: must initialize two ACL struct fields to zero
selinux: use "grep -E" instead of "egrep"
ima: fix blocking of security.ima xattrs of unsupported algorithms
userfaultfd: open userfaultfds with O_RDONLY
ntfs3: rework xattr handlers and switch to POSIX ACL VFS helpers
thermal: cpufreq_cooling: Check the policy first in cpufreq_cooling_register()
sh: machvec: Use char[] for section boundaries
MIPS: SGI-IP27: Free some unused memory
MIPS: SGI-IP27: Fix platform-device leak in bridge_platform_create()
ARM: 9244/1: dump: Fix wrong pg_level in walk_pmd()
ARM: 9247/1: mm: set readonly for MT_MEMORY_RO with ARM_LPAE
objtool: Preserve special st_shndx indexes in elf_update_symbol
nfsd: Fix a memory leak in an error handling path
SUNRPC: Fix svcxdr_init_decode's end-of-buffer calculation
SUNRPC: Fix svcxdr_init_encode's buflen calculation
NFSD: Protect against send buffer overflow in NFSv2 READDIR
NFSD: Fix handling of oversized NFSv4 COMPOUND requests
wifi: rtlwifi: 8192de: correct checking of IQK reload
wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state()
leds: lm3601x: Don't use mutex after it was destroyed
bpf: Fix reference state management for synchronous callbacks
wifi: mac80211: allow bw change during channel switch in mesh
bpftool: Fix a wrong type cast in btf_dumper_int
spi: mt7621: Fix an error message in mt7621_spi_probe()
x86/resctrl: Fix to restore to original value when re-enabling hardware prefetch register
xsk: Fix backpressure mechanism on Tx
bpf: Disable preemption when increasing per-cpu map_locked
bpf: Propagate error from htab_lock_bucket() to userspace
bpf: Use this_cpu_{inc|dec|inc_return} for bpf_task_storage_busy
Bluetooth: btusb: mediatek: fix WMT failure during runtime suspend
wifi: rtl8xxxu: tighten bounds checking in rtl8xxxu_read_efuse()
wifi: rtw88: add missing destroy_workqueue() on error path in rtw_core_init()
selftests/xsk: Avoid use-after-free on ctx
spi: qup: add missing clk_disable_unprepare on error in spi_qup_resume()
spi: qup: add missing clk_disable_unprepare on error in spi_qup_pm_resume_runtime()
wifi: rtl8xxxu: Fix skb misuse in TX queue selection
spi: meson-spicc: do not rely on busy flag in pow2 clk ops
bpf: btf: fix truncated last_member_type_id in btf_struct_resolve
wifi: rtl8xxxu: gen2: Fix mistake in path B IQ calibration
wifi: rtl8xxxu: Remove copy-paste leftover in gen2_update_rate_mask
wifi: mt76: sdio: fix transmitting packet hangs
wifi: mt76: mt7615: add mt7615_mutex_acquire/release in mt7615_sta_set_decap_offload
wifi: mt76: mt7915: do not check state before configuring implicit beamform
Bluetooth: RFCOMM: Fix possible deadlock on socket shutdown/release
net: fs_enet: Fix wrong check in do_pd_setup
bpf: Ensure correct locking around vulnerable function find_vpid()
Bluetooth: hci_{ldisc,serdev}: check percpu_init_rwsem() failure
netfilter: conntrack: fix the gc rescheduling delay
netfilter: conntrack: revisit the gc initial rescheduling bias
wifi: ath11k: fix number of VHT beamformee spatial streams
x86/microcode/AMD: Track patch allocation size explicitly
x86/cpu: Include the header of init_ia32_feat_ctl()'s prototype
spi: dw: Fix PM disable depth imbalance in dw_spi_bt1_probe
spi/omap100k:Fix PM disable depth imbalance in omap1_spi100k_probe
skmsg: Schedule psock work if the cached skb exists on the psock
i2c: mlxbf: support lock mechanism
Bluetooth: hci_core: Fix not handling link timeouts propertly
xfrm: Reinject transport-mode packets through workqueue
netfilter: nft_fib: Fix for rpath check with VRF devices
spi: s3c64xx: Fix large transfers with DMA
wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM
vhost/vsock: Use kvmalloc/kvfree for larger packets.
eth: alx: take rtnl_lock on resume
mISDN: fix use-after-free bugs in l1oip timer handlers
sctp: handle the error returned from sctp_auth_asoc_init_active_key
tcp: fix tcp_cwnd_validate() to not forget is_cwnd_limited
spi: Ensure that sg_table won't be used after being freed
hwmon: (pmbus/mp2888) Fix sensors readouts for MPS Multi-phase mp2888 controller
net: rds: don't hold sock lock when cancelling work from rds_tcp_reset_callbacks()
bnx2x: fix potential memory leak in bnx2x_tpa_stop()
net: wwan: iosm: Call mutex_init before locking it
net/ieee802154: reject zero-sized raw_sendmsg()
once: add DO_ONCE_SLOW() for sleepable contexts
net: mvpp2: fix mvpp2 debugfs leak
drm: bridge: adv7511: fix CEC power down control register offset
drm: bridge: adv7511: unregister cec i2c device after cec adapter
drm/bridge: Avoid uninitialized variable warning
drm/mipi-dsi: Detach devices when removing the host
drm/virtio: Correct drm_gem_shmem_get_sg_table() error handling
drm/bridge: parade-ps8640: Fix regulator supply order
drm/dp_mst: fix drm_dp_dpcd_read return value checks
drm:pl111: Add of_node_put() when breaking out of for_each_available_child_of_node()
ASoC: mt6359: fix tests for platform_get_irq() failure
platform/chrome: fix double-free in chromeos_laptop_prepare()
platform/chrome: fix memory corruption in ioctl
ASoC: tas2764: Allow mono streams
ASoC: tas2764: Drop conflicting set_bias_level power setting
ASoC: tas2764: Fix mute/unmute
platform/x86: msi-laptop: Fix old-ec check for backlight registering
platform/x86: msi-laptop: Fix resource cleanup
platform/chrome: cros_ec_typec: Correct alt mode index
drm/amdgpu: add missing pci_disable_device() in amdgpu_pmops_runtime_resume()
drm/bridge: megachips: Fix a null pointer dereference bug
ASoC: rsnd: Add check for rsnd_mod_power_on
ALSA: hda: beep: Simplify keep-power-at-enable behavior
drm/bochs: fix blanking
drm/omap: dss: Fix refcount leak bugs
drm/amdgpu: Fix memory leak in hpd_rx_irq_create_workqueue()
mmc: au1xmmc: Fix an error handling path in au1xmmc_probe()
ASoC: eureka-tlv320: Hold reference returned from of_find_xxx API
drm/msm/dpu: index dpu_kms->hw_vbif using vbif_idx
drm/msm/dp: correct 1.62G link rate at dp_catalog_ctrl_config_msa()
drm/vmwgfx: Fix memory leak in vmw_mksstat_add_ioctl()
ASoC: codecs: tx-macro: fix kcontrol put
ASoC: da7219: Fix an error handling path in da7219_register_dai_clks()
ALSA: dmaengine: increment buffer pointer atomically
mmc: wmt-sdmmc: Fix an error handling path in wmt_mci_probe()
ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe
ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe
ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe
ASoC: mt6660: Fix PM disable depth imbalance in mt6660_i2c_probe
ALSA: hda/hdmi: Don't skip notification handling during PM operation
memory: pl353-smc: Fix refcount leak bug in pl353_smc_probe()
memory: of: Fix refcount leak bug in of_get_ddr_timings()
memory: of: Fix refcount leak bug in of_lpddr3_get_ddr_timings()
locks: fix TOCTOU race when granting write lease
soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe()
soc: qcom: smem_state: Add refcounting for the 'state->of_node'
ARM: dts: imx6qdl-kontron-samx6i: hook up DDC i2c bus
ARM: dts: turris-omnia: Fix mpp26 pin name and comment
ARM: dts: kirkwood: lsxl: fix serial line
ARM: dts: kirkwood: lsxl: remove first ethernet port
ia64: export memory_add_physaddr_to_nid to fix cxl build error
soc/tegra: fuse: Drop Kconfig dependency on TEGRA20_APB_DMA
arm64: dts: ti: k3-j7200: fix main pinmux range
ARM: dts: exynos: correct s5k6a3 reset polarity on Midas family
ARM: Drop CMDLINE_* dependency on ATAGS
ext4: don't run ext4lazyinit for read-only filesystems
arm64: ftrace: fix module PLTs with mcount
ARM: dts: exynos: fix polarity of VBUS GPIO of Origen
iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX
iio: adc: at91-sama5d2_adc: check return status for pressure and touch
iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq
iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resume
iio: inkern: only release the device node when done with it
iio: inkern: fix return value in devm_of_iio_channel_get_by_name()
iio: ABI: Fix wrong format of differential capacitance channel ABI.
iio: magnetometer: yas530: Change data type of hard_offsets to signed
RDMA/mlx5: Don't compare mkey tags in DEVX indirect mkey
usb: common: debug: Check non-standard control requests
clk: meson: Hold reference returned by of_get_parent()
clk: oxnas: Hold reference returned by of_get_parent()
clk: qoriq: Hold reference returned by of_get_parent()
clk: berlin: Add of_node_put() for of_get_parent()
clk: sprd: Hold reference returned by of_get_parent()
clk: tegra: Fix refcount leak in tegra210_clock_init
clk: tegra: Fix refcount leak in tegra114_clock_init
clk: tegra20: Fix refcount leak in tegra20_clock_init
HSI: omap_ssi: Fix refcount leak in ssi_probe
HSI: omap_ssi_port: Fix dma_map_sg error check
media: exynos4-is: fimc-is: Add of_node_put() when breaking out of loop
tty: xilinx_uartps: Fix the ignore_status
media: meson: vdec: add missing clk_disable_unprepare on error in vdec_hevc_start()
media: uvcvideo: Fix memory leak in uvc_gpio_parse
media: uvcvideo: Use entity get_cur in uvc_ctrl_set
media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init
RDMA/rxe: Fix "kernel NULL pointer dereference" error
RDMA/rxe: Fix the error caused by qp->sk
misc: ocxl: fix possible refcount leak in afu_ioctl()
fpga: prevent integer overflow in dfl_feature_ioctl_set_irq()
dmaengine: hisilicon: Disable channels when unregister hisi_dma
dmaengine: hisilicon: Fix CQ head update
dmaengine: hisilicon: Add multi-thread support for a DMA channel
dyndbg: fix static_branch manipulation
dyndbg: fix module.dyndbg handling
dyndbg: let query-modname override actual module name
dyndbg: drop EXPORTed dynamic_debug_exec_queries
clk: qcom: sm6115: Select QCOM_GDSC
mtd: devices: docg3: check the return value of devm_ioremap() in the probe
phy: amlogic: phy-meson-axg-mipi-pcie-analog: Hold reference returned by of_get_parent()
phy: phy-mtk-tphy: fix the phy type setting issue
mtd: rawnand: intel: Read the chip-select line from the correct OF node
mtd: rawnand: intel: Remove undocumented compatible string
mtd: rawnand: fsl_elbc: Fix none ECC mode
RDMA/irdma: Align AE id codes to correct flush code and event
RDMA/srp: Fix srp_abort()
RDMA/siw: Always consume all skbuf data in sk_data_ready() upcall.
RDMA/siw: Fix QP destroy to wait for all references dropped.
ata: fix ata_id_sense_reporting_enabled() and ata_id_has_sense_reporting()
ata: fix ata_id_has_devslp()
ata: fix ata_id_has_ncq_autosense()
ata: fix ata_id_has_dipm()
mtd: rawnand: meson: fix bit map use in meson_nfc_ecc_correct()
md: Replace snprintf with scnprintf
md/raid5: Ensure stripe_fill happens on non-read IO with journal
md/raid5: Remove unnecessary bio_put() in raid5_read_one_chunk()
RDMA/cm: Use SLID in the work completion as the DLID in responder side
IB: Set IOVA/LENGTH on IB_MR in core/uverbs layers
xhci: Don't show warning for reinit on known broken suspend
usb: gadget: function: fix dangling pnp_string in f_printer.c
drivers: serial: jsm: fix some leaks in probe
serial: 8250: Toggle IER bits on only after irq has been set up
tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown
phy: qualcomm: call clk_disable_unprepare in the error handling
staging: vt6655: fix some erroneous memory clean-up loops
slimbus: qcom-ngd-ctrl: allow compile testing without QCOM_RPROC_COMMON
firmware: google: Test spinlock on panic path to avoid lockups
serial: 8250: Fix restoring termios speed after suspend
scsi: libsas: Fix use-after-free bug in smp_execute_task_sg()
scsi: iscsi: Rename iscsi_conn_queue_work()
scsi: iscsi: Add recv workqueue helpers
scsi: iscsi: Run recv path from workqueue
scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()
clk: qcom: apss-ipq6018: mark apcs_alias0_core_clk as critical
clk: qcom: gcc-sm6115: Override default Alpha PLL regs
RDMA/rxe: Fix resize_finish() in rxe_queue.c
fsi: core: Check error number after calling ida_simple_get
mfd: intel_soc_pmic: Fix an error handling path in intel_soc_pmic_i2c_probe()
mfd: fsl-imx25: Fix an error handling path in mx25_tsadc_setup_irq()
mfd: lp8788: Fix an error handling path in lp8788_probe()
mfd: lp8788: Fix an error handling path in lp8788_irq_init() and lp8788_irq_init()
mfd: fsl-imx25: Fix check for platform_get_irq() errors
mfd: sm501: Add check for platform_driver_register()
clk: mediatek: mt8183: mfgcfg: Propagate rate changes to parent
dmaengine: ioat: stop mod_timer from resurrecting deleted timer in __cleanup()
usb: mtu3: fix failed runtime suspend in host only mode
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
clk: vc5: Fix 5P49V6901 outputs disabling when enabling FOD
clk: baikal-t1: Fix invalid xGMAC PTP clock divider
clk: baikal-t1: Add shared xGMAC ref/ptp clocks internal parent
clk: baikal-t1: Add SATA internal ref clock buffer
clk: bcm2835: fix bcm2835_clock_rate_from_divisor declaration
clk: imx: scu: fix memleak on platform_device_add() fails
clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
clk: ast2600: BCLK comes from EPLL
mailbox: mpfs: fix handling of the reg property
mailbox: mpfs: account for mbox offsets while sending
mailbox: bcm-ferxrm-mailbox: Fix error check for dma_map_sg
powerpc/configs: Properly enable PAPR_SCM in pseries_defconfig
powerpc/math_emu/efp: Include module.h
powerpc/sysdev/fsl_msi: Add missing of_node_put()
powerpc/pci_dn: Add missing of_node_put()
powerpc/powernv: add missing of_node_put() in opal_export_attrs()
powerpc: Fix fallocate and fadvise64_64 compat parameter combination
x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition
powerpc/64s: Fix GENERIC_CPU build flags for PPC970 / G5
powerpc: Fix SPE Power ISA properties for e500v1 platforms
powerpc/kprobes: Fix null pointer reference in arch_prepare_kprobe()
powerpc/pseries/vas: Pass hw_cpu_id to node associativity HCALL
crypto: sahara - don't sleep when in softirq
crypto: hisilicon/zip - fix mismatch in get/set sgl_sge_nr
hwrng: arm-smccc-trng - fix NO_ENTROPY handling
cgroup: Honor caller's cgroup NS when resolving path
hwrng: imx-rngc - Moving IRQ handler registering after imx_rngc_irq_mask_clear()
crypto: qat - fix default value of WDT timer
crypto: hisilicon/qm - fix missing put dfx access
cgroup/cpuset: Enable update_tasks_cpumask() on top_cpuset
iommu/omap: Fix buffer overflow in debugfs
crypto: akcipher - default implementation for setting a private key
crypto: ccp - Release dma channels before dmaengine unrgister
crypto: inside-secure - Change swab to swab32
crypto: qat - fix DMA transfer direction
cifs: return correct error in ->calc_signature()
iommu/iova: Fix module config properly
tracing: kprobe: Fix kprobe event gen test module on exit
tracing: kprobe: Make gen test module work in arm and riscv
tracing/osnoise: Fix possible recursive locking in stop_per_cpu_kthreads
kbuild: remove the target in signal traps when interrupted
kbuild: rpm-pkg: fix breakage when V=1 is used
crypto: marvell/octeontx - prevent integer overflows
crypto: cavium - prevent integer overflow loading firmware
thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_id
ACPI: APEI: do not add task_work to kernel thread to avoid memory leak
f2fs: fix race condition on setting FI_NO_EXTENT flag
f2fs: fix to account FS_CP_DATA_IO correctly
selftest: tpm2: Add Client.__del__() to close /dev/tpm* handle
fs: dlm: fix race in lowcomms
rcu: Avoid triggering strict-GP irq-work when RCU is idle
rcu: Back off upon fill_page_cache_func() allocation failure
rcu-tasks: Convert RCU_LOCKDEP_WARN() to WARN_ONCE()
ACPI: video: Add Toshiba Satellite/Portege Z830 quirk
ACPI: tables: FPDT: Don't call acpi_os_map_memory() on invalid phys address
cpufreq: intel_pstate: Add Tigerlake support in no-HWP mode
MIPS: BCM47XX: Cast memcmp() of function to (void *)
powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue
thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash
ARM: decompressor: Include .data.rel.ro.local
ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable
x86/entry: Work around Clang __bdos() bug
NFSD: Return nfserr_serverfault if splice_ok but buf->pages have data
NFSD: fix use-after-free on source server when doing inter-server copy
wifi: brcmfmac: fix invalid address access when enabling SCAN log level
bpftool: Clear errno after libcap's checks
ice: set tx_tstamps when creating new Tx rings via ethtool
net: ethernet: ti: davinci_mdio: Add workaround for errata i2329
openvswitch: Fix double reporting of drops in dropwatch
openvswitch: Fix overreporting of drops in dropwatch
tcp: annotate data-race around tcp_md5sig_pool_populated
x86/mce: Retrieve poison range from hardware
wifi: ath9k: avoid uninit memory read in ath9k_htc_rx_msg()
thunderbolt: Add back Intel Falcon Ridge end-to-end flow control workaround
xfrm: Update ipcomp_scratches with NULL when freed
iavf: Fix race between iavf_close and iavf_reset_task
wifi: brcmfmac: fix use-after-free bug in brcmf_netdev_start_xmit()
Bluetooth: btintel: Mark Intel controller to support LE_STATES quirk
regulator: core: Prevent integer underflow
wifi: mt76: mt7921: reset msta->airtime_ac while clearing up hw value
Bluetooth: L2CAP: initialize delayed works at l2cap_chan_create()
Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times
can: bcm: check the result of can_send() in bcm_can_tx()
wifi: rt2x00: don't run Rt5592 IQ calibration on MT7620
wifi: rt2x00: set correct TX_SW_CFG1 MAC register for MT7620
wifi: rt2x00: set VGC gain for both chains of MT7620
wifi: rt2x00: set SoC wmac clock register
wifi: rt2x00: correctly set BBP register 86 for MT7620
hwmon: (sht4x) do not overflow clamping operation on 32-bit platforms
net: If sock is dead don't access sock's sk_wq in sk_stream_wait_memory
Bluetooth: L2CAP: Fix user-after-free
r8152: Rate limit overflow messages
drm/nouveau/nouveau_bo: fix potential memory leak in nouveau_bo_alloc()
drm: Use size_t type for len variable in drm_copy_field()
drm: Prevent drm_copy_field() to attempt copying a NULL pointer
drm/komeda: Fix handling of atomic commits in the atomic_commit_tail hook
gpu: lontium-lt9611: Fix NULL pointer dereference in lt9611_connector_init()
drm/amd/display: fix overflow on MIN_I64 definition
udmabuf: Set ubuf->sg = NULL if the creation of sg table fails
drm: bridge: dw_hdmi: only trigger hotplug event on link change
ALSA: usb-audio: Register card at the last interface
drm/vc4: vec: Fix timings for VEC modes
drm: panel-orientation-quirks: Add quirk for Anbernic Win600
platform/chrome: cros_ec: Notify the PM of wake events during resume
platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading
ASoC: SOF: pci: Change DMI match info to support all Chrome platforms
drm/amdgpu: fix initial connector audio value
drm/meson: reorder driver deinit sequence to fix use-after-free bug
drm/meson: explicitly remove aggregate driver at module unload time
mmc: sdhci-msm: add compatible string check for sdm670
drm/dp: Don't rewrite link config when setting phy test pattern
drm/amd/display: Remove interface for periodic interrupt 1
ARM: dts: imx7d-sdb: config the max pressure for tsc2046
ARM: dts: imx6q: add missing properties for sram
ARM: dts: imx6dl: add missing properties for sram
ARM: dts: imx6qp: add missing properties for sram
ARM: dts: imx6sl: add missing properties for sram
ARM: dts: imx6sll: add missing properties for sram
ARM: dts: imx6sx: add missing properties for sram
kselftest/arm64: Fix validatation termination record after EXTRA_CONTEXT
arm64: dts: imx8mq-librem5: Add bq25895 as max17055's power supply
btrfs: dump extra info if one free space cache has more bitmaps than it should
btrfs: scrub: try to fix super block errors
btrfs: don't print information about space cache or tree every remount
ARM: 9242/1: kasan: Only map modules if CONFIG_KASAN_VMALLOC=n
clk: zynqmp: Fix stack-out-of-bounds in strncpy`
media: cx88: Fix a null-ptr-deref bug in buffer_prepare()
media: platform: fix some double free in meson-ge2d and mtk-jpeg and s5p-mfc
clk: zynqmp: pll: rectify rate rounding in zynqmp_pll_round_rate
usb: host: xhci-plat: suspend and resume clocks
usb: host: xhci-plat: suspend/resume clks for brcm
dmaengine: ti: k3-udma: Reset UDMA_CHAN_RT byte counters to prevent overflow
scsi: 3w-9xxx: Avoid disabling device if failing to enable it
nbd: Fix hung when signal interrupts nbd_start_device_ioctl()
iommu/arm-smmu-v3: Make default domain type of HiSilicon PTT device to identity
power: supply: adp5061: fix out-of-bounds read in adp5061_get_chg_type()
staging: vt6655: fix potential memory leak
blk-throttle: prevent overflow while calculating wait time
ata: libahci_platform: Sanity check the DT child nodes number
bcache: fix set_at_max_writeback_rate() for multiple attached devices
soundwire: cadence: Don't overwrite msg->buf during write commands
soundwire: intel: fix error handling on dai registration issues
HID: roccat: Fix use-after-free in roccat_read()
eventfd: guard wake_up in eventfd fs calls as well
md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d
usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()
usb: musb: Fix musb_gadget.c rxstate overflow bug
arm64: dts: imx8mp: Add snps,gfladj-refclk-lpm-sel quirk to USB nodes
usb: dwc3: core: Enable GUCTL1 bit 10 for fixing termination error after resume bug
Revert "usb: storage: Add quirk for Samsung Fit flash"
staging: rtl8723bs: fix potential memory leak in rtw_init_drv_sw()
staging: rtl8723bs: fix a potential memory leak in rtw_init_cmd_priv()
scsi: tracing: Fix compile error in trace_array calls when TRACING is disabled
ext2: Use kvmalloc() for group descriptor array
nvme: copy firmware_rev on each init
nvmet-tcp: add bounds check on Transfer Tag
usb: idmouse: fix an uninit-value in idmouse_open
clk: bcm2835: Make peripheral PLLC critical
clk: bcm2835: Round UART input clock up
perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
io_uring/af_unix: defer registered files gc to io_uring release
io_uring: correct pinned_vm accounting
io_uring/rw: fix short rw error handling
io_uring/rw: fix error'ed retry return values
io_uring/rw: fix unexpected link breakage
mm: hugetlb: fix UAF in hugetlb_handle_userfault
net: ieee802154: return -EINVAL for unknown addr type
ALSA: usb-audio: Fix last interface check for registration
blk-wbt: fix that 'rwb->wc' is always set to 1 in wbt_init()
net: ethernet: ti: davinci_mdio: fix build for mdio bitbang uses
Revert "net/ieee802154: reject zero-sized raw_sendmsg()"
net/ieee802154: don't warn zero-sized raw_sendmsg()
drm/amd/display: Fix build breakage with CONFIG_DEBUG_FS=n
Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5
Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5
ext4: continue to expand file system when the target size doesn't reach
thermal: intel_powerclamp: Use first online CPU as control_cpu
gcov: support GCC 12.1 and newer compilers
io-wq: Fix memory leak in worker creation
Linux 5.15.75
Change-Id: I5a3ef9688fb31003940d7e1828f863b9d50f1da9
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Currently the VBUS/ID detection interrupts are disabled during system
suspend. So the USB cable connect/disconnect event can't wakeup the
system from low power mode. To allow this, we keep these interrupts
enabled and configure them as wakeup capable. This behavior can be
controlled through device wakeup source policy by the user space.
This was tested and verified on a target.
(cherry picked from commit 7afe69ad9221a77dc782b81f49cd7f99987740ed https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/ usb-next)
Bug: 234808630
Link: https://lore.kernel.org/r/1653634146-12215-1-git-send-email-quic_prashk@quicinc.com
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change-Id: I8767f91aa78805984856334821072e0c7986eea0
(cherry picked from commit 564ba930506ef0035eaecfbae96849512ef7eeb1)
commit 0a907ee9d95e3ac35eb023d71f29eae0aaa52d1b upstream.
of_node_put should always be called on device nodes gotten from
of_get_*. Additionally, it should only be called after there are no
remaining users. To address the first issue, call of_node_put if later
steps in ulpi_register fail. To address the latter, call put_device if
device_register fails, which will call ulpi_dev_release if necessary.
Fixes: ef6a7bcfb0 ("usb: ulpi: Support device discovery via DT")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20220127190004.1446909-3-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e3dd4a6246945bf84ea6f478365d116e661554c upstream.
Commit 7495af930835 ("ARM: multi_v7_defconfig: Enable drivers for
DragonBoard 410c") enables the CONFIG_PHY_QCOM_USB_HS for the ARM
multi_v7_defconfig. Enabling this Kconfig is causing the kernel to crash
on the Tegra20 Ventana platform in the ulpi_match() function.
The Qualcomm USB HS PHY driver that is enabled by CONFIG_PHY_QCOM_USB_HS,
registers a ulpi_driver but this driver does not provide an 'id_table',
so when ulpi_match() is called on the Tegra20 Ventana platform, it
crashes when attempting to deference the id_table pointer which is not
valid. The Qualcomm USB HS PHY driver uses device-tree for matching the
ULPI driver with the device and so fix this crash by using device-tree
for matching if the id_table is not valid.
Fixes: ef6a7bcfb0 ("usb: ulpi: Support device discovery via DT")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20220117150039.44058-1-jonathanh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt patches for 5.15-rc1.
Nothing huge in here, just lots of constant forward progress on a
number of different drivers and hardware support:
- more USB 4/Thunderbolt support added
- dwc3 driver updates and additions
- usb gadget fixes and addtions for new types
- udc gadget driver updates
- host controller updates
- removal of obsolete drivers
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits)
usb: isp1760: otg control register access
usb: isp1760: use the right irq status bit
usb: isp1760: write to status and address register
usb: isp1760: fix qtd fill length
usb: isp1760: fix memory pool initialization
usb: typec: tcpm: Fix spelling mistake "atleast" -> "at least"
usb: dwc2: Fix spelling mistake "was't" -> "wasn't"
usb: renesas_usbhs: Fix spelling mistake "faile" -> "failed"
usb: host: xhci-rcar: Don't reload firmware after the completion
usb: xhci-mtk: allow bandwidth table rollover
usb: mtu3: fix random remote wakeup
usb: mtu3: return successful suspend status
usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint
usb: xhci-mtk: modify the SOF/ITP interval for mt8195
usb: xhci-mtk: add a member of num_esit
usb: xhci-mtk: check boundary before check tt
usb: xhci-mtk: update fs bus bandwidth by bw_budget_table
usb: xhci-mtk: fix issue of out-of-bounds array access
usb: xhci-mtk: support option to disable usb2 ports
usb: xhci-mtk: fix use-after-free of mtk->hcd
...
The HNP work can be re-scheduled while it's still in-fly. This results in
re-initialization of the busy work, resetting the hrtimer's list node of
the work and crashing kernel with null dereference within kernel/timer
once work's timer is expired. It's very easy to trigger this problem by
re-plugging USB cable quickly. Initialize HNP work only once to fix this
trouble.
Unable to handle kernel NULL pointer dereference at virtual address 00000126)
...
PC is at __run_timers.part.0+0x150/0x228
LR is at __next_timer_interrupt+0x51/0x9c
...
(__run_timers.part.0) from [<c0187a2b>] (run_timer_softirq+0x2f/0x50)
(run_timer_softirq) from [<c01013ad>] (__do_softirq+0xd5/0x2f0)
(__do_softirq) from [<c012589b>] (irq_exit+0xab/0xb8)
(irq_exit) from [<c0170341>] (handle_domain_irq+0x45/0x60)
(handle_domain_irq) from [<c04c4a43>] (gic_handle_irq+0x6b/0x7c)
(gic_handle_irq) from [<c0100b65>] (__irq_svc+0x65/0xac)
Cc: stable@vger.kernel.org
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210717182134.30262-6-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Register a power supply charger, whose online state depends on whether
the USB role is set to device or not.
This is useful when the USB role is the only way to know if the device
is charging from USB. The API is the standard power supply charger API,
you get a /sys/class/power_supply/xxx/online node which tells you the
state of the charger.
The sole purpose of this is to give userspace applications a way to
know whether or not the charger is plugged.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200727170413.23131-1-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719160910.60018-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firstly, demote function header to standard comment block as
they are not suitable for kerneldoc. Then provide description
for ulpi_register_driver()'s argument 'module'. Finally rename
description for ulpi_unregister_interface()'s 'ulpi' arg.
Fixes the following W=1 warnings:
drivers/usb/common/ulpi.c:23: warning: Function parameter or member 'ulpi' not described in 'ulpi_read'
drivers/usb/common/ulpi.c:23: warning: Function parameter or member 'addr' not described in 'ulpi_read'
drivers/usb/common/ulpi.c:150: warning: Function parameter or member 'module' not described in '__ulpi_register_driver'
drivers/usb/common/ulpi.c:299: warning: Function parameter or member 'ulpi' not described in 'ulpi_unregister_interface'
drivers/usb/common/ulpi.c:299: warning: Excess function parameter 'intrf' description in 'ulpi_unregister_interface'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-8-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
File headers and simple comments are not kerneldoc worthy.
Fixes the following W=1 warnings:
drivers/usb/common/debug.c:15: warning: Function parameter or member 'bRequestType' not described in 'usb_decode_get_status'
drivers/usb/common/debug.c:15: warning: Function parameter or member 'wIndex' not described in 'usb_decode_get_status'
drivers/usb/common/debug.c:15: warning: Function parameter or member 'wLength' not described in 'usb_decode_get_status'
drivers/usb/common/debug.c:15: warning: Function parameter or member 'str' not described in 'usb_decode_get_status'
drivers/usb/common/debug.c:15: warning: Function parameter or member 'size' not described in 'usb_decode_get_status'
drivers/usb/common/debug.c:216: warning: Function parameter or member 'str' not described in 'usb_decode_ctrl'
drivers/usb/common/debug.c:216: warning: Function parameter or member 'size' not described in 'usb_decode_ctrl'
drivers/usb/common/debug.c:216: warning: Function parameter or member 'bRequestType' not described in 'usb_decode_ctrl'
drivers/usb/common/debug.c:216: warning: Function parameter or member 'bRequest' not described in 'usb_decode_ctrl'
drivers/usb/common/debug.c:216: warning: Function parameter or member 'wValue' not described in 'usb_decode_ctrl'
drivers/usb/common/debug.c:216: warning: Function parameter or member 'wIndex' not described in 'usb_decode_ctrl'
drivers/usb/common/debug.c:216: warning: Function parameter or member 'wLength' not described in 'usb_decode_ctrl'
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch moves switch responsible for decoding descriptor type
outside snprintf. It improves code readability a little.
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Patch adds usb_decode_test_mode and usb_decode_device_feature functions,
which allow to make more readable and simplify the
usb_decode_set_clear_feature function.
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Patch moves some decoding functions from driver/usb/dwc3/debug.h driver
to driver/usb/common/debug.c file. These moved functions include:
dwc3_decode_get_status
dwc3_decode_set_clear_feature
dwc3_decode_set_address
dwc3_decode_get_set_descriptor
dwc3_decode_get_configuration
dwc3_decode_set_configuration
dwc3_decode_get_intf
dwc3_decode_set_intf
dwc3_decode_synch_frame
dwc3_decode_set_sel
dwc3_decode_set_isoch_delay
dwc3_decode_ctrl
These functions are used also in inroduced cdns3 driver.
All functions prefixes were changed from dwc3 to usb.
Also, function's parameters has been extended according to the name
of fields in standard SETUP packet.
Additionally, patch adds usb_decode_ctrl function to
include/linux/usb/ch9.h file.
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
The USB gadget subsystem wants to use the USB debugfs root directory, so
move it to the common "core" USB code so that it is properly initialized
and removed as needed.
In order to properly do this, we need to load the common code before the
usb core code, when everything is linked into the kernel, so reorder the
link order of the code.
Also as the usb common code has the possibility of the led trigger logic
to be merged into it, handle the build option properly by only having
one module init/exit function and have the common code initialize the
led trigger if needed.
Reported-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Tested-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some places, the code prints a human-readable USB endpoint
transfer type (e.g. "bulk"). This involves a switch statement
sometimes wrapped around in ({ ... }) block leading to code
repetition.
To make this scenario easier, here introduces usb_ep_type_string()
function, which returns a human-readable name of provided
endpoint type.
It also changes a few places switch was used to use this
new function.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are cases where multiple device tree nodes point to the
same phy node by means of the "phys" property, but we should
only consider those nodes that are marked as available rather
than just any node.
Fixes: 98bfb39466 ("usb: of: add an api to get dr_mode by the phy node")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
That makes the USB role switch support option visible and
selectable for the user. The class driver is also moved to
drivers/usb/roles/ directory.
This will fix an issue that we have with the Intel USB role
switch driver on systems that don't have USB Type-C connectors:
Intel USB role switch driver depends on the USB role switch
class as it should, but since there was no way for the user
to enable the USB role switch class, there was also no way
to select that driver. USB Type-C drivers select the USB
role switch class which makes the Intel USB role switch
driver available and therefore hides the problem.
So in practice Intel USB role switch driver was depending on
USB Type-C drivers.
Fixes: f6fb9ec02b ("usb: roles: Add Intel xHCI USB role switch driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since renesas_usb3 udc driver calls usb_of_get_companion_dev()
which is on usb/core/of.c, build error like below happens if we
disable CONFIG_USB because the usb/core/ needs CONFIG_USB:
ERROR: "usb_of_get_companion_dev" [drivers/usb/gadget/udc/renesas_usb3.ko] undefined!
According to the usb/gadget/Kconfig, "NOTE: Gadget support
** DOES NOT ** depend on host-side CONFIG_USB !!".
So, to fix the issue, this patch changes the usb_of_get_companion_dev()
place from usb/core/of.c to usb/common/common.c to be called by both
host and gadget.
Reported-by: John Garry <john.garry@huawei.com>
Fixes: 39facfa01c ("usb: gadget: udc: renesas_usb3: Add register of usb role switch")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB role switch is a device that can be used to choose the
data role for USB connector. With dual-role capable USB
controllers, the controller itself will be the switch, but
on some platforms the USB host and device controllers are
separate IPs and there is a mux between them and the
connector. On those platforms the mux driver will need to
register the switch.
With USB Type-C connectors, the host-to-device relationship
is negotiated over the Configuration Channel (CC). That
means the USB Type-C drivers need to be in control of the
role switch. The class provides a simple API for the USB
Type-C drivers for the control.
For other types of USB connectors (mainly microAB) the class
provides user space control via sysfs attribute file that
can be used to request role swapping from the switch.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix bus-node lookup during registration, which ended up searching the whole
device tree depth-first starting at the parent (or grand parent) rather
than just matching on its children.
To make things worse, the parent (or grand-parent) node could end being
prematurely freed as well.
Fixes: ef6a7bcfb0 ("usb: ulpi: Support device discovery via DT")
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Reported-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: stable <stable@vger.kernel.org> # 4.10
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull USB/PHY updates from Greg KH:
"Here is the big set of USB and PHY driver updates for 4.15-rc1.
There is the usual amount of gadget and xhci driver updates, along
with phy and chipidea enhancements. There's also a lot of SPDX tags
and license boilerplate cleanups as well, which provide some churn in
the diffstat.
Other major thing is the typec code that moved out of staging and into
the "real" part of the drivers/usb/ tree, which was nice to see
happen.
All of these have been in linux-next with no reported issues for a
while"
* tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
usb: gadget: f_fs: Fix use-after-free in ffs_free_inst
USB: usbfs: compute urb->actual_length for isochronous
usb: core: message: remember to reset 'ret' to 0 when necessary
USB: typec: Remove remaining redundant license text
USB: typec: add SPDX identifiers to some files
USB: renesas_usbhs: rcar?.h: add SPDX tags
USB: chipidea: ci_hdrc_tegra.c: add SPDX line
USB: host: xhci-debugfs: add SPDX lines
USB: add SPDX identifiers to all remaining Makefiles
usb: host: isp1362-hcd: remove a couple of redundant assignments
USB: adutux: remove redundant variable minor
usb: core: add a new usb_get_ptm_status() helper
usb: core: add a 'type' parameter to usb_get_status()
usb: core: introduce a new usb_get_std_status() helper
usb: core: rename usb_get_status() 'type' argument to 'recip'
usb: core: add Status Type definitions
USB: gadget: Remove redundant license text
USB: gadget: function: Remove redundant license text
USB: gadget: udc: Remove redundant license text
USB: gadget: legacy: Remove redundant license text
...
Now that the SPDX tag is in all USB files, that identifies the license
in a specific and legally-defined manner. So the extra GPL text wording
can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Peter Chen <Peter.Chen@nxp.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the drivers/usb/ and include/linux/usb* files with the correct
SPDX license identifier based on the license text in the file itself.
The SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use more compact of_property_read_bool() calls for the boolean properties
instead of of_find_property() calls in of_usb_host_tpl_support() and
of_usb_update_otg_caps().
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
