94de3b405c8dee0ffc8de5c06b32fbf00fc4e8f9
48 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
a9422ed2f1 |
Merge 5.15.46 into android13-5.15-lts
Changes in 5.15.46
binfmt_flat: do not stop relocating GOT entries prematurely on riscv
parisc/stifb: Implement fb_is_primary_device()
parisc/stifb: Keep track of hardware path of graphics card
RISC-V: Mark IORESOURCE_EXCLUSIVE for reserved mem instead of IORESOURCE_BUSY
riscv: Initialize thread pointer before calling C functions
riscv: Fix irq_work when SMP is disabled
riscv: Wire up memfd_secret in UAPI header
riscv: Move alternative length validation into subsection
ALSA: hda/realtek - Add new type for ALC245
ALSA: hda/realtek: Enable 4-speaker output for Dell XPS 15 9520 laptop
ALSA: hda/realtek - Fix microphone noise on ASUS TUF B550M-PLUS
ALSA: usb-audio: Cancel pending work at closing a MIDI substream
USB: serial: pl2303: fix type detection for odd device
USB: serial: option: add Quectel BG95 modem
USB: new quirk for Dell Gen 2 devices
usb: isp1760: Fix out-of-bounds array access
usb: dwc3: gadget: Move null pinter check to proper place
usb: core: hcd: Add support for deferring roothub registration
fs/ntfs3: Update valid size if -EIOCBQUEUED
fs/ntfs3: Fix fiemap + fix shrink file size (to remove preallocated space)
fs/ntfs3: Keep preallocated only if option prealloc enabled
fs/ntfs3: Check new size for limits
fs/ntfs3: In function ntfs_set_acl_ex do not change inode->i_mode if called from function ntfs_init_acl
fs/ntfs3: Fix some memory leaks in an error handling path of 'log_replay()'
fs/ntfs3: Update i_ctime when xattr is added
fs/ntfs3: Restore ntfs_xattr_get_acl and ntfs_xattr_set_acl functions
cifs: fix potential double free during failed mount
cifs: when extending a file with falloc we should make files not-sparse
xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI
platform/x86: intel-hid: fix _DSM function index handling
x86/MCE/AMD: Fix memory leak when threshold_create_bank() fails
perf/x86/intel: Fix event constraints for ICL
x86/kexec: fix memory leak of elf header buffer
x86/sgx: Set active memcg prior to shmem allocation
ptrace/um: Replace PT_DTRACE with TIF_SINGLESTEP
ptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEP
ptrace: Reimplement PTRACE_KILL by always sending SIGKILL
btrfs: add "0x" prefix for unsupported optional features
btrfs: return correct error number for __extent_writepage_io()
btrfs: repair super block num_devices automatically
btrfs: fix the error handling for submit_extent_page() for btrfs_do_readpage()
iommu/vt-d: Add RPLS to quirk list to skip TE disabling
drm/vmwgfx: validate the screen formats
drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes
selftests/bpf: Fix vfs_link kprobe definition
selftests/bpf: Fix parsing of prog types in UAPI hdr for bpftool sync
mwifiex: add mutex lock for call in mwifiex_dfs_chan_sw_work_queue
b43legacy: Fix assigning negative value to unsigned variable
b43: Fix assigning negative value to unsigned variable
ipw2x00: Fix potential NULL dereference in libipw_xmit()
ipv6: fix locking issues with loops over idev->addr_list
fbcon: Consistently protect deferred_takeover with console_lock()
x86/platform/uv: Update TSC sync state for UV5
ACPICA: Avoid cache flush inside virtual machines
mac80211: minstrel_ht: fix where rate stats are stored (fixes debugfs output)
drm/komeda: return early if drm_universal_plane_init() fails.
drm/amd/display: Disabling Z10 on DCN31
rcu-tasks: Fix race in schedule and flush work
rcu: Make TASKS_RUDE_RCU select IRQ_WORK
sfc: ef10: Fix assigning negative value to unsigned variable
ALSA: jack: Access input_dev under mutex
rtw88: 8821c: fix debugfs rssi value
spi: spi-rspi: Remove setting {src,dst}_{addr,addr_width} based on DMA direction
tools/power turbostat: fix ICX DRAM power numbers
scsi: lpfc: Move cfg_log_verbose check before calling lpfc_dmp_dbg()
scsi: lpfc: Fix SCSI I/O completion and abort handler deadlock
scsi: lpfc: Fix call trace observed during I/O with CMF enabled
cpuidle: PSCI: Improve support for suspend-to-RAM for PSCI OSI mode
drm/amd/pm: fix double free in si_parse_power_table()
ASoC: rsnd: care default case on rsnd_ssiu_busif_err_status_clear()
ASoC: rsnd: care return value from rsnd_node_fixed_index()
ath9k: fix QCA9561 PA bias level
media: venus: hfi: avoid null dereference in deinit
media: pci: cx23885: Fix the error handling in cx23885_initdev()
media: cx25821: Fix the warning when removing the module
md/bitmap: don't set sb values if can't pass sanity check
mmc: jz4740: Apply DMA engine limits to maximum segment size
drivers: mmc: sdhci_am654: Add the quirk to set TESTCD bit
scsi: megaraid: Fix error check return value of register_chrdev()
drm/amdgpu/sdma: Fix incorrect calculations of the wptr of the doorbells
scsi: ufs: Use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()
scsi: lpfc: Fix resource leak in lpfc_sli4_send_seq_to_ulp()
ath11k: disable spectral scan during spectral deinit
ASoC: Intel: bytcr_rt5640: Add quirk for the HP Pro Tablet 408
drm/plane: Move range check for format_count earlier
drm/amd/pm: fix the compile warning
ath10k: skip ath10k_halt during suspend for driver state RESTARTING
arm64: compat: Do not treat syscall number as ESR_ELx for a bad syscall
drm: msm: fix error check return value of irq_of_parse_and_map()
scsi: target: tcmu: Fix possible data corruption
ipv6: Don't send rs packets to the interface of ARPHRD_TUNNEL
net/mlx5: fs, delete the FTE when there are no rules attached to it
ASoC: dapm: Don't fold register value changes into notifications
mlxsw: spectrum_dcb: Do not warn about priority changes
mlxsw: Treat LLDP packets as control
drm/amdgpu/psp: move PSP memory alloc from hw_init to sw_init
drm/amdgpu/ucode: Remove firmware load type check in amdgpu_ucode_free_bo
regulator: mt6315: Enforce regulator-compatible, not name
HID: bigben: fix slab-out-of-bounds Write in bigben_probe
of: Support more than one crash kernel regions for kexec -s
ASoC: tscs454: Add endianness flag in snd_soc_component_driver
scsi: lpfc: Alter FPIN stat accounting logic
net: remove two BUG() from skb_checksum_help()
s390/preempt: disable __preempt_count_add() optimization for PROFILE_ALL_BRANCHES
perf/amd/ibs: Cascade pmu init functions' return value
sched/core: Avoid obvious double update_rq_clock warning
spi: stm32-qspi: Fix wait_cmd timeout in APM mode
dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC
ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default
ipmi:ssif: Check for NULL msg when handling events and messages
ipmi: Fix pr_fmt to avoid compilation issues
rtlwifi: Use pr_warn instead of WARN_ONCE
mt76: mt7921: accept rx frames with non-standard VHT MCS10-11
mt76: fix encap offload ethernet type check
media: rga: fix possible memory leak in rga_probe
media: coda: limit frame interval enumeration to supported encoder frame sizes
media: hantro: HEVC: unconditionnaly set pps_{cb/cr}_qp_offset values
media: ccs-core.c: fix failure to call clk_disable_unprepare
media: imon: reorganize serialization
media: cec-adap.c: fix is_configuring state
usbnet: Run unregister_netdev() before unbind() again
openrisc: start CPU timer early in boot
nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags
ASoC: rt5645: Fix errorenous cleanup order
nbd: Fix hung on disconnect request if socket is closed before
drm/amd/pm: update smartshift powerboost calc for smu12
drm/amd/pm: update smartshift powerboost calc for smu13
net: phy: micrel: Allow probing without .driver_data
media: exynos4-is: Fix compile warning
media: hantro: Stop using H.264 parameter pic_num
ASoC: max98357a: remove dependency on GPIOLIB
ASoC: rt1015p: remove dependency on GPIOLIB
ACPI: CPPC: Assume no transition latency if no PCCT
nvme: set non-mdts limits in nvme_scan_work
can: mcp251xfd: silence clang's -Wunaligned-access warning
x86/microcode: Add explicit CPU vendor dependency
net: ipa: ignore endianness if there is no header
m68k: atari: Make Atari ROM port I/O write macros return void
rxrpc: Return an error to sendmsg if call failed
rxrpc, afs: Fix selection of abort codes
afs: Adjust ACK interpretation to try and cope with NAT
eth: tg3: silence the GCC 12 array-bounds warning
char: tpm: cr50_i2c: Suppress duplicated error message in .remove()
selftests/bpf: fix btf_dump/btf_dump due to recent clang change
gfs2: use i_lock spin_lock for inode qadata
scsi: target: tcmu: Avoid holding XArray lock when calling lock_page
IB/rdmavt: add missing locks in rvt_ruc_loopback
ARM: dts: ox820: align interrupt controller node name with dtschema
ARM: dts: socfpga: align interrupt controller node name with dtschema
ARM: dts: s5pv210: align DMA channels with dtschema
arm64: dts: qcom: msm8994: Fix the cont_splash_mem address
arm64: dts: qcom: msm8994: Fix BLSP[12]_DMA channels count
PM / devfreq: rk3399_dmc: Disable edev on remove()
crypto: ccree - use fine grained DMA mapping dir
soc: ti: ti_sci_pm_domains: Check for null return of devm_kcalloc
fs: jfs: fix possible NULL pointer dereference in dbFree()
arm64: dts: qcom: sdm845-xiaomi-beryllium: fix typo in panel's vddio-supply property
ALSA: usb-audio: Add quirk bits for enabling/disabling generic implicit fb
ALSA: usb-audio: Move generic implicit fb quirk entries into quirks.c
ARM: OMAP1: clock: Fix UART rate reporting algorithm
powerpc/fadump: Fix fadump to work with a different endian capture kernel
fat: add ratelimit to fat*_ent_bread()
pinctrl: renesas: rzn1: Fix possible null-ptr-deref in sh_pfc_map_resources()
ARM: versatile: Add missing of_node_put in dcscb_init
ARM: dts: exynos: add atmel,24c128 fallback to Samsung EEPROM
ARM: hisi: Add missing of_node_put after of_find_compatible_node
cpufreq: Avoid unnecessary frequency updates due to mismatch
powerpc/rtas: Keep MSR[RI] set when calling RTAS
PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()
KVM: PPC: Book3S HV Nested: L2 LPCR should inherit L1 LPES setting
alpha: fix alloc_zeroed_user_highpage_movable()
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
powerpc/powernv/vas: Assign real address to rx_fifo in vas_rx_win_attr
powerpc/xics: fix refcount leak in icp_opal_init()
powerpc/powernv: fix missing of_node_put in uv_init()
macintosh/via-pmu: Fix build failure when CONFIG_INPUT is disabled
powerpc/iommu: Add missing of_node_put in iommu_init_early_dart
smb3: check for null tcon
RDMA/hfi1: Prevent panic when SDMA is disabled
Input: gpio-keys - cancel delayed work only in case of GPIO
drm: fix EDID struct for old ARM OABI format
drm/bridge_connector: enable HPD by default if supported
dt-bindings: display: sitronix, st7735r: Fix backlight in example
drm/vmwgfx: Fix an invalid read
ath11k: acquire ab->base_lock in unassign when finding the peer by addr
drm: bridge: it66121: Fix the register page length
ath9k: fix ar9003_get_eepmisc
drm/edid: fix invalid EDID extension block filtering
drm/bridge: adv7511: clean up CEC adapter when probe fails
drm: bridge: icn6211: Fix register layout
drm: bridge: icn6211: Fix HFP_HSW_HBP_HI and HFP_MIN handling
mtd: spinand: gigadevice: fix Quad IO for GD5F1GQ5UExxG
spi: qcom-qspi: Add minItems to interconnect-names
ASoC: mediatek: Fix error handling in mt8173_max98090_dev_probe
ASoC: mediatek: Fix missing of_node_put in mt2701_wm8960_machine_probe
x86/delay: Fix the wrong asm constraint in delay_loop()
drm/vc4: hvs: Fix frame count register readout
drm/mediatek: Fix mtk_cec_mask()
drm/vc4: hvs: Reset muxes at probe time
drm/vc4: txp: Don't set TXP_VSTART_AT_EOF
drm/vc4: txp: Force alpha to be 0xff if it's disabled
libbpf: Don't error out on CO-RE relos for overriden weak subprogs
x86/PCI: Fix ALi M1487 (IBC) PIRQ router link value interpretation
mptcp: reset the packet scheduler on PRIO change
nl80211: show SSID for P2P_GO interfaces
drm/komeda: Fix an undefined behavior bug in komeda_plane_add()
drm: mali-dp: potential dereference of null pointer
spi: spi-ti-qspi: Fix return value handling of wait_for_completion_timeout
scftorture: Fix distribution of short handler delays
net: dsa: mt7530: 1G can also support 1000BASE-X link mode
ixp4xx_eth: fix error check return value of platform_get_irq()
NFC: NULL out the dev->rfkill to prevent UAF
efi: Add missing prototype for efi_capsule_setup_info
device property: Check fwnode->secondary when finding properties
device property: Allow error pointer to be passed to fwnode APIs
target: remove an incorrect unmap zeroes data deduction
drbd: fix duplicate array initializer
EDAC/dmc520: Don't print an error for each unconfigured interrupt line
mtd: rawnand: denali: Use managed device resources
HID: hid-led: fix maximum brightness for Dream Cheeky
HID: elan: Fix potential double free in elan_input_configured
drm/bridge: Fix error handling in analogix_dp_probe
regulator: da9121: Fix uninit-value in da9121_assign_chip_model()
drm/mediatek: dpi: Use mt8183 output formats for mt8192
signal: Deliver SIGTRAP on perf event asynchronously if blocked
sched/fair: Fix cfs_rq_clock_pelt() for throttled cfs_rq
sched/psi: report zeroes for CPU full at the system level
spi: img-spfi: Fix pm_runtime_get_sync() error checking
cpufreq: Fix possible race in cpufreq online error path
printk: use atomic updates for klogd work
printk: add missing memory barrier to wake_up_klogd()
printk: wake waiters for safe and NMI contexts
ath9k_htc: fix potential out of bounds access with invalid rxstatus->rs_keyix
media: i2c: max9286: Use dev_err_probe() helper
media: i2c: max9286: Use "maxim,gpio-poc" property
media: i2c: max9286: fix kernel oops when removing module
media: hantro: Empty encoder capture buffers by default
drm/panel: simple: Add missing bus flags for Innolux G070Y2-L01
ALSA: pcm: Check for null pointer of pointer substream before dereferencing it
mtdblock: warn if opened on NAND
inotify: show inotify mask flags in proc fdinfo
fsnotify: fix wrong lockdep annotations
spi: rockchip: Stop spi slave dma receiver when cs inactive
spi: rockchip: Preset cs-high and clk polarity in setup progress
spi: rockchip: fix missing error on unsupported SPI_CS_HIGH
of: overlay: do not break notify on NOTIFY_{OK|STOP}
selftests/damon: add damon to selftests root Makefile
drm/msm/dp: Modify prototype of encoder based API
drm/msm/hdmi: switch to drm_bridge_connector
drm/msm/dpu: adjust display_v_end for eDP and DP
scsi: iscsi: Fix harmless double shift bug
scsi: ufs: qcom: Fix ufs_qcom_resume()
scsi: ufs: core: Exclude UECxx from SFR dump list
drm/v3d: Fix null pointer dereference of pointer perfmon
selftests/resctrl: Fix null pointer dereference on open failed
libbpf: Fix logic for finding matching program for CO-RE relocation
mtd: spi-nor: core: Check written SR value in spi_nor_write_16bit_sr_and_check()
x86/pm: Fix false positive kmemleak report in msr_build_context()
mtd: rawnand: cadence: fix possible null-ptr-deref in cadence_nand_dt_probe()
mtd: rawnand: intel: fix possible null-ptr-deref in ebu_nand_probe()
x86/speculation: Add missing prototype for unpriv_ebpf_notify()
ASoC: rk3328: fix disabling mclk on pclk probe failure
perf tools: Add missing headers needed by util/data.h
drm/msm/disp/dpu1: set vbif hw config to NULL to avoid use after memory free during pm runtime resume
drm/msm/dp: stop event kernel thread when DP unbind
drm/msm/dp: fix error check return value of irq_of_parse_and_map()
drm/msm/dp: reset DP controller before transmit phy test pattern
drm/msm/dp: do not stop transmitting phy test pattern during DP phy compliance test
drm/msm/dsi: fix error checks and return values for DSI xmit functions
drm/msm/hdmi: check return value after calling platform_get_resource_byname()
drm/msm/hdmi: fix error check return value of irq_of_parse_and_map()
drm/msm: add missing include to msm_drv.c
drm/panel: panel-simple: Fix proper bpc for AM-1280800N3TZQW-T00H
kunit: fix debugfs code to use enum kunit_status, not bool
drm/rockchip: vop: fix possible null-ptr-deref in vop_bind()
spi: cadence-quadspi: fix Direct Access Mode disable for SoCFPGA
perf tools: Use Python devtools for version autodetection rather than runtime
virtio_blk: fix the discard_granularity and discard_alignment queue limits
nl80211: don't hold RTNL in color change request
x86: Fix return value of __setup handlers
irqchip/exiu: Fix acknowledgment of edge triggered interrupts
irqchip/aspeed-i2c-ic: Fix irq_of_parse_and_map() return value
irqchip/aspeed-scu-ic: Fix irq_of_parse_and_map() return value
x86/mm: Cleanup the control_va_addr_alignment() __setup handler
arm64: fix types in copy_highpage()
regulator: core: Fix enable_count imbalance with EXCLUSIVE_GET
drm/msm/dsi: fix address for second DSI PHY on SDM660
drm/msm/dp: fix event thread stuck in wait_event after kthread_stop()
drm/msm/mdp5: Return error code in mdp5_pipe_release when deadlock is detected
drm/msm/mdp5: Return error code in mdp5_mixer_release when deadlock is detected
drm/msm: return an error pointer in msm_gem_prime_get_sg_table()
media: uvcvideo: Fix missing check to determine if element is found in list
arm64: stackleak: fix current_top_of_stack()
iomap: iomap_write_failed fix
spi: spi-fsl-qspi: check return value after calling platform_get_resource_byname()
Revert "cpufreq: Fix possible race in cpufreq online error path"
regulator: qcom_smd: Fix up PM8950 regulator configuration
samples: bpf: Don't fail for a missing VMLINUX_BTF when VMLINUX_H is provided
perf/amd/ibs: Use interrupt regs ip for stack unwinding
ath11k: Don't check arvif->is_started before sending management frames
wilc1000: fix crash observed in AP mode with cfg80211_register_netdevice()
HID: amd_sfh: Modify the bus name
HID: amd_sfh: Modify the hid name
ASoC: fsl: Use dev_err_probe() helper
ASoC: fsl: Fix refcount leak in imx_sgtl5000_probe
ASoC: imx-hdmi: Fix refcount leak in imx_hdmi_probe
ASoC: mxs-saif: Fix refcount leak in mxs_saif_probe
regulator: pfuze100: Fix refcount leak in pfuze_parse_regulators_dt
dma-direct: factor out a helper for DMA_ATTR_NO_KERNEL_MAPPING allocations
dma-direct: don't fail on highmem CMA pages in dma_direct_alloc_pages
ASoC: samsung: Use dev_err_probe() helper
ASoC: samsung: Fix refcount leak in aries_audio_probe
block: Fix the bio.bi_opf comment
kselftest/cgroup: fix test_stress.sh to use OUTPUT dir
scripts/faddr2line: Fix overlapping text section failures
media: aspeed: Fix an error handling path in aspeed_video_probe()
media: exynos4-is: Fix PM disable depth imbalance in fimc_is_probe
mt76: mt7921: Fix the error handling path of mt7921_pci_probe()
mt76: do not attempt to reorder received 802.3 packets without agg session
media: st-delta: Fix PM disable depth imbalance in delta_probe
media: atmel: atmel-isc: Fix PM disable depth imbalance in atmel_isc_probe
media: i2c: rdacm2x: properly set subdev entity function
media: exynos4-is: Change clk_disable to clk_disable_unprepare
media: pvrusb2: fix array-index-out-of-bounds in pvr2_i2c_core_init
media: vsp1: Fix offset calculation for plane cropping
media: atmel: atmel-sama5d2-isc: fix wrong mask in YUYV format check
media: hantro: HEVC: Fix tile info buffer value computation
Bluetooth: fix dangling sco_conn and use-after-free in sco_sock_timeout
Bluetooth: use hdev lock in activate_scan for hci_is_adv_monitoring
Bluetooth: use hdev lock for accept_list and reject_list in conn req
nvme: set dma alignment to dword
m68k: math-emu: Fix dependencies of math emulation support
sctp: read sk->sk_bound_dev_if once in sctp_rcv()
net: hinic: add missing destroy_workqueue in hinic_pf_to_mgmt_init
ASoC: ti: j721e-evm: Fix refcount leak in j721e_soc_probe_*
kselftest/arm64: bti: force static linking
media: ov7670: remove ov7670_power_off from ov7670_remove
media: i2c: ov5648: fix wrong pointer passed to IS_ERR() and PTR_ERR()
media: staging: media: rkvdec: Make use of the helper function devm_platform_ioremap_resource()
media: rkvdec: h264: Fix dpb_valid implementation
media: rkvdec: h264: Fix bit depth wrap in pps packet
regulator: scmi: Fix refcount leak in scmi_regulator_probe
ext4: reject the 'commit' option on ext2 filesystems
drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init
drm: msm: fix possible memory leak in mdp5_crtc_cursor_set()
x86/sev: Annotate stack change in the #VC handler
drm/msm: don't free the IRQ if it was not requested
selftests/bpf: Add missed ima_setup.sh in Makefile
drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path
drm/i915: Fix CFI violation with show_dynamic_id()
thermal/drivers/bcm2711: Don't clamp temperature at zero
thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe
thermal/core: Fix memory leak in __thermal_cooling_device_register()
thermal/drivers/imx_sc_thermal: Fix refcount leak in imx_sc_thermal_probe
bfq: Relax waker detection for shared queues
bfq: Allow current waker to defend against a tentative one
ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition()
PM: domains: Fix initialization of genpd's next_wakeup
net: macb: Fix PTP one step sync support
NFC: hci: fix sleep in atomic context bugs in nfc_hci_hcp_message_tx
ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv()
net: stmmac: selftests: Use kcalloc() instead of kzalloc()
net: stmmac: fix out-of-bounds access in a selftest
hv_netvsc: Fix potential dereference of NULL pointer
hwmon: (pmbus) Check PEC support before reading other registers
rxrpc: Fix listen() setting the bar too high for the prealloc rings
rxrpc: Don't try to resend the request if we're receiving the reply
rxrpc: Fix overlapping ACK accounting
rxrpc: Don't let ack.previousPacket regress
rxrpc: Fix decision on when to generate an IDLE ACK
net: huawei: hinic: Use devm_kcalloc() instead of devm_kzalloc()
hinic: Avoid some over memory allocation
net: dsa: restrict SMSC_LAN9303_I2C kconfig
net/smc: postpone sk_refcnt increment in connect()
dma-direct: factor out dma_set_{de,en}crypted helpers
dma-direct: don't call dma_set_decrypted for remapped allocations
dma-direct: always leak memory that can't be re-encrypted
dma-direct: don't over-decrypt memory
arm64: dts: rockchip: Move drive-impedance-ohm to emmc phy on rk3399
arm64: dts: mt8192: Fix nor_flash status disable typo
PCI/ACPI: Allow D3 only if Root Port can signal and wake from D3
memory: samsung: exynos5422-dmc: Avoid some over memory allocation
ARM: dts: BCM5301X: update CRU block description
ARM: dts: BCM5301X: Update pin controller node name
ARM: dts: suniv: F1C100: fix watchdog compatible
soc: qcom: smp2p: Fix missing of_node_put() in smp2p_parse_ipc
soc: qcom: smsm: Fix missing of_node_put() in smsm_parse_ipc
PCI: cadence: Fix find_first_zero_bit() limit
PCI: rockchip: Fix find_first_zero_bit() limit
PCI: mediatek: Fix refcount leak in mtk_pcie_subsys_powerup()
PCI: dwc: Fix setting error return on MSI DMA mapping failure
ARM: dts: ci4x10: Adapt to changes in imx6qdl.dtsi regarding fec clocks
soc: qcom: llcc: Add MODULE_DEVICE_TABLE()
KVM: nVMX: Leave most VM-Exit info fields unmodified on failed VM-Entry
KVM: nVMX: Clear IDT vectoring on nested VM-Exit for double/triple fault
crypto: qat - set CIPHER capability for QAT GEN2
crypto: qat - set COMPRESSION capability for QAT GEN2
crypto: qat - set CIPHER capability for DH895XCC
crypto: qat - set COMPRESSION capability for DH895XCC
platform/chrome: cros_ec: fix error handling in cros_ec_register()
ARM: dts: imx6dl-colibri: Fix I2C pinmuxing
platform/chrome: Re-introduce cros_ec_cmd_xfer and use it for ioctls
can: xilinx_can: mark bit timing constants as const
ARM: dts: stm32: Fix PHY post-reset delay on Avenger96
ARM: dts: bcm2835-rpi-zero-w: Fix GPIO line name for Wifi/BT
ARM: dts: bcm2837-rpi-cm3-io3: Fix GPIO line names for SMPS I2C
ARM: dts: bcm2837-rpi-3-b-plus: Fix GPIO line name of power LED
ARM: dts: bcm2835-rpi-b: Fix GPIO line names
misc: ocxl: fix possible double free in ocxl_file_register_afu
crypto: marvell/cesa - ECB does not IV
gpiolib: of: Introduce hook for missing gpio-ranges
pinctrl: bcm2835: implement hook for missing gpio-ranges
arm: mediatek: select arch timer for mt7629
pinctrl/rockchip: support deferring other gpio params
pinctrl: mediatek: mt8195: enable driver on mtk platforms
arm64: dts: qcom: qrb5165-rb5: Fix can-clock node name
Drivers: hv: vmbus: Fix handling of messages with transaction ID of zero
powerpc/fadump: fix PT_LOAD segment for boot memory area
mfd: ipaq-micro: Fix error check return value of platform_get_irq()
scsi: fcoe: Fix Wstringop-overflow warnings in fcoe_wwn_from_mac()
soc: bcm: Check for NULL return of devm_kzalloc()
arm64: dts: ti: k3-am64-mcu: remove incorrect UART base clock rates
ASoC: sh: rz-ssi: Check return value of pm_runtime_resume_and_get()
ASoC: sh: rz-ssi: Propagate error codes returned from platform_get_irq_byname()
ASoC: sh: rz-ssi: Release the DMA channels in rz_ssi_probe() error path
firmware: arm_scmi: Fix list protocols enumeration in the base protocol
nvdimm: Fix firmware activation deadlock scenarios
nvdimm: Allow overwrite in the presence of disabled dimms
pinctrl: mvebu: Fix irq_of_parse_and_map() return value
drivers/base/node.c: fix compaction sysfs file leak
dax: fix cache flush on PMD-mapped pages
drivers/base/memory: fix an unlikely reference counting issue in __add_memory_block()
firmware: arm_ffa: Fix uuid parameter to ffa_partition_probe
firmware: arm_ffa: Remove incorrect assignment of driver_data
list: introduce list_is_head() helper and re-use it in list.h
list: fix a data-race around ep->rdllist
drm/msm/dpu: fix error check return value of irq_of_parse_and_map()
powerpc/8xx: export 'cpm_setbrg' for modules
pinctrl: renesas: r8a779a0: Fix GPIO function on I2C-capable pins
pinctrl: renesas: core: Fix possible null-ptr-deref in sh_pfc_map_resources()
powerpc/idle: Fix return value of __setup() handler
powerpc/4xx/cpm: Fix return value of __setup() handler
RDMA/hns: Add the detection for CMDQ status in the device initialization process
arm64: dts: marvell: espressobin-ultra: fix SPI-NOR config
arm64: dts: marvell: espressobin-ultra: enable front USB3 port
ASoC: atmel-pdmic: Remove endianness flag on pdmic component
ASoC: atmel-classd: Remove endianness flag on class d component
proc: fix dentry/inode overinstantiating under /proc/${pid}/net
ipc/mqueue: use get_tree_nodev() in mqueue_get_tree()
PCI: imx6: Fix PERST# start-up sequence
tty: fix deadlock caused by calling printk() under tty_port->lock
crypto: sun8i-ss - rework handling of IV
crypto: sun8i-ss - handle zero sized sg
crypto: cryptd - Protect per-CPU resource by disabling BH.
ARM: dts: at91: sama7g5: remove interrupt-parent from gic node
hugetlbfs: fix hugetlbfs_statfs() locking
Input: sparcspkr - fix refcount leak in bbc_beep_probe
PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits
PCI: microchip: Fix potential race in interrupt handling
hwrng: omap3-rom - fix using wrong clk_disable() in omap_rom_rng_runtime_resume()
powerpc/64: Only WARN if __pa()/__va() called with bad addresses
powerpc/perf: Fix the threshold compare group constraint for power10
powerpc/perf: Fix the threshold compare group constraint for power9
macintosh: via-pmu and via-cuda need RTC_LIB
powerpc/xive: Add some error handling code to 'xive_spapr_init()'
powerpc/xive: Fix refcount leak in xive_spapr_init
powerpc/fsl_rio: Fix refcount leak in fsl_rio_setup
mfd: davinci_voicecodec: Fix possible null-ptr-deref davinci_vc_probe()
nfsd: destroy percpu stats counters after reply cache shutdown
mailbox: forward the hrtimer if not queued and under a lock
RDMA/hfi1: Prevent use of lock before it is initialized
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
Input: stmfts - do not leave device disabled in stmfts_input_open
OPP: call of_node_put() on error path in _bandwidth_supported()
f2fs: support fault injection for dquot_initialize()
f2fs: fix to do sanity check on inline_dots inode
f2fs: fix dereference of stale list iterator after loop body
iommu/amd: Enable swiotlb in all cases
iommu/mediatek: Fix 2 HW sharing pgtable issue
iommu/mediatek: Add list_del in mtk_iommu_remove
iommu/mediatek: Remove clk_disable in mtk_iommu_remove
iommu/mediatek: Add mutex for m4u_group and m4u_dom in data
i2c: at91: use dma safe buffers
cpufreq: mediatek: Use module_init and add module_exit
cpufreq: mediatek: Unregister platform device on exit
iommu/arm-smmu-v3-sva: Fix mm use-after-free
MIPS: Loongson: Use hwmon_device_register_with_groups() to register hwmon
iommu/mediatek: Fix NULL pointer dereference when printing dev_name
i2c: at91: Initialize dma_buf in at91_twi_xfer()
dmaengine: idxd: Fix the error handling path in idxd_cdev_register()
NFS: Do not report EINTR/ERESTARTSYS as mapping errors
NFS: fsync() should report filesystem errors over EINTR/ERESTARTSYS
NFS: Don't report ENOSPC write errors twice
NFS: Do not report flush errors in nfs_write_end()
NFS: Don't report errors from nfs_pageio_complete() more than once
NFSv4/pNFS: Do not fail I/O when we fail to allocate the pNFS layout
NFS: Further fixes to the writeback error handling
video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup
dmaengine: stm32-mdma: remove GISR1 register
dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler()
iommu/amd: Increase timeout waiting for GA log enablement
i2c: npcm: Fix timeout calculation
i2c: npcm: Correct register access width
i2c: npcm: Handle spurious interrupts
i2c: rcar: fix PM ref counts in probe error paths
perf build: Fix btf__load_from_kernel_by_id() feature check
perf c2c: Use stdio interface if slang is not supported
perf jevents: Fix event syntax error caused by ExtSel
video: fbdev: vesafb: Fix a use-after-free due early fb_info cleanup
NFS: Always initialise fattr->label in nfs_fattr_alloc()
NFS: Create a new nfs_alloc_fattr_with_label() function
NFS: Convert GFP_NOFS to GFP_KERNEL
NFSv4.1 mark qualified async operations as MOVEABLE tasks
f2fs: fix to avoid f2fs_bug_on() in dec_valid_node_count()
f2fs: fix to do sanity check on block address in f2fs_do_zero_range()
f2fs: fix to clear dirty inode in f2fs_evict_inode()
f2fs: fix deadloop in foreground GC
f2fs: don't need inode lock for system hidden quota
f2fs: fix to do sanity check on total_data_blocks
f2fs: don't use casefolded comparison for "." and ".."
f2fs: fix fallocate to use file_modified to update permissions consistently
f2fs: fix to do sanity check for inline inode
objtool: Fix objtool regression on x32 systems
objtool: Fix symbol creation
wifi: mac80211: fix use-after-free in chanctx code
iwlwifi: mvm: fix assert 1F04 upon reconfig
fs-writeback: writeback_sb_inodes:Recalculate 'wrote' according skipped pages
efi: Do not import certificates from UEFI Secure Boot for T2 Macs
bfq: Avoid false marking of bic as stably merged
bfq: Avoid merging queues with different parents
bfq: Split shared queues on move between cgroups
bfq: Update cgroup information before merging bio
bfq: Drop pointless unlock-lock pair
bfq: Remove pointless bfq_init_rq() calls
bfq: Track whether bfq_group is still online
bfq: Get rid of __bio_blkcg() usage
bfq: Make sure bfqg for which we are queueing requests is online
ext4: mark group as trimmed only if it was fully scanned
ext4: fix use-after-free in ext4_rename_dir_prepare
ext4: fix race condition between ext4_write and ext4_convert_inline_data
ext4: fix warning in ext4_handle_inode_extension
ext4: fix bug_on in ext4_writepages
ext4: filter out EXT4_FC_REPLAY from on-disk superblock field s_state
ext4: fix bug_on in __es_tree_search
ext4: verify dir block before splitting it
ext4: avoid cycles in directory h-tree
ACPI: property: Release subnode properties with data nodes
tty: goldfish: Introduce gf_ioread32()/gf_iowrite32()
tracing: Fix potential double free in create_var_ref()
tracing: Initialize integer variable to prevent garbage return value
drm/amdgpu: add beige goby PCI ID
PCI/PM: Fix bridge_d3_blacklist[] Elo i2 overwrite of Gigabyte X299
PCI: qcom: Fix runtime PM imbalance on probe errors
PCI: qcom: Fix unbalanced PHY init on probe errors
staging: r8188eu: prevent ->Ssid overflow in rtw_wx_set_scan()
mm, compaction: fast_find_migrateblock() should return pfn in the target zone
s390/perf: obtain sie_block from the right address
s390/stp: clock_delta should be signed
dlm: fix plock invalid read
dlm: uninitialized variable on error in dlm_listen_for_all()
dlm: fix missing lkb refcount handling
ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock
scsi: dc395x: Fix a missing check on list iterator
scsi: ufs: qcom: Add a readl() to make sure ref_clk gets enabled
landlock: Add clang-format exceptions
landlock: Format with clang-format
selftests/landlock: Add clang-format exceptions
selftests/landlock: Normalize array assignment
selftests/landlock: Format with clang-format
samples/landlock: Add clang-format exceptions
samples/landlock: Format with clang-format
landlock: Fix landlock_add_rule(2) documentation
selftests/landlock: Make tests build with old libc
selftests/landlock: Extend tests for minimal valid attribute size
selftests/landlock: Add tests for unknown access rights
selftests/landlock: Extend access right tests to directories
selftests/landlock: Fully test file rename with "remove" access
selftests/landlock: Add tests for O_PATH
landlock: Change landlock_add_rule(2) argument check ordering
landlock: Change landlock_restrict_self(2) check ordering
selftests/landlock: Test landlock_create_ruleset(2) argument check ordering
landlock: Define access_mask_t to enforce a consistent access mask size
landlock: Reduce the maximum number of layers to 16
landlock: Create find_rule() from unmask_layers()
landlock: Fix same-layer rule unions
drm/amdgpu/cs: make commands with 0 chunks illegal behaviour.
drm/nouveau/subdev/bus: Ratelimit logging for fault errors
drm/etnaviv: check for reaped mapping in etnaviv_iommu_unmap_gem
drm/nouveau/clk: Fix an incorrect NULL check on list iterator
drm/nouveau/kms/nv50-: atom: fix an incorrect NULL check on list iterator
drm/bridge: analogix_dp: Grab runtime PM reference for DP-AUX
drm/i915/dsi: fix VBT send packet port selection for ICL+
md: fix an incorrect NULL check in does_sb_need_changing
md: fix an incorrect NULL check in md_reload_sb
mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write
mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N
media: coda: Fix reported H264 profile
media: coda: Add more H264 levels for CODA960
ima: remove the IMA_TEMPLATE Kconfig option
Kconfig: Add option for asm goto w/ tied outputs to workaround clang-13 bug
RDMA/hfi1: Fix potential integer multiplication overflow errors
mmc: core: Allows to override the timeout value for ioctl() path
csky: patch_text: Fixup last cpu should be master
irqchip/armada-370-xp: Do not touch Performance Counter Overflow on A375, A38x, A39x
irqchip: irq-xtensa-mx: fix initial IRQ affinity
thermal: devfreq_cooling: use local ops instead of global ops
cfg80211: declare MODULE_FIRMWARE for regulatory.db
mac80211: upgrade passive scan to active scan on DFS channels after beacon rx
um: Use asm-generic/dma-mapping.h
um: chan_user: Fix winch_tramp() return value
um: Fix out-of-bounds read in LDT setup
kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add]
ftrace: Clean up hash direct_functions on register failures
ksmbd: fix outstanding credits related bugs
iommu/msm: Fix an incorrect NULL check on list iterator
iommu/dma: Fix iova map result check bug
Revert "mm/cma.c: remove redundant cma_mutex lock"
mm/page_alloc: always attempt to allocate at least one page during bulk allocation
nodemask.h: fix compilation error with GCC12
hugetlb: fix huge_pmd_unshare address update
mm/memremap: fix missing call to untrack_pfn() in pagemap_range()
xtensa/simdisk: fix proc_read_simdisk()
rtl818x: Prevent using not initialized queues
ASoC: rt5514: Fix event generation for "DSP Voice Wake Up" control
carl9170: tx: fix an incorrect use of list iterator
stm: ltdc: fix two incorrect NULL checks on list iterator
bcache: improve multithreaded bch_btree_check()
bcache: improve multithreaded bch_sectors_dirty_init()
bcache: remove incremental dirty sector counting for bch_sectors_dirty_init()
bcache: avoid journal no-space deadlock by reserving 1 journal bucket
serial: pch: don't overwrite xmit->buf[0] by x_char
tilcdc: tilcdc_external: fix an incorrect NULL check on list iterator
gma500: fix an incorrect NULL check on list iterator
arm64: dts: qcom: ipq8074: fix the sleep clock frequency
arm64: tegra: Add missing DFLL reset on Tegra210
clk: tegra: Add missing reset deassertion
phy: qcom-qmp: fix struct clk leak on probe errors
ARM: dts: s5pv210: Remove spi-cs-high on panel in Aries
ARM: pxa: maybe fix gpio lookup tables
SMB3: EBADF/EIO errors in rename/open caused by race condition in smb2_compound_op
docs/conf.py: Cope with removal of language=None in Sphinx 5.0.0
dt-bindings: gpio: altera: correct interrupt-cells
vdpasim: allow to enable a vq repeatedly
blk-iolatency: Fix inflight count imbalances and IO hangs on offline
coresight: core: Fix coresight device probe failure issue
phy: qcom-qmp: fix reset-controller leak on probe errors
net: ipa: fix page free in ipa_endpoint_trans_release()
net: ipa: fix page free in ipa_endpoint_replenish_one()
kseltest/cgroup: Make test_stress.sh work if run interactively
list: test: Add a test for list_is_head()
Revert "random: use static branch for crng_ready()"
staging: r8188eu: delete rtw_wx_read/write32()
RDMA/hns: Remove the num_cqc_timer variable
RDMA/rxe: Generate a completion for unsupported/invalid opcode
MIPS: IP27: Remove incorrect `cpu_has_fpu' override
MIPS: IP30: Remove incorrect `cpu_has_fpu' override
ext4: only allow test_dummy_encryption when supported
interconnect: qcom: sc7180: Drop IP0 interconnects
interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate
fs: add two trivial lookup helpers
exportfs: support idmapped mounts
fs/ntfs3: Fix invalid free in log_replay
md: Don't set mddev private to NULL in raid0 pers->free
md: fix double free of io_acct_set bioset
md: bcache: check the return value of kzalloc() in detached_dev_do_request()
pinctrl/rockchip: support setting input-enable param
block: fix bio_clone_blkg_association() to associate with proper blkcg_gq
Linux 5.15.46
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Id50a95d816e662c0cba3d09dbfd561f386d7a52e
|
||
|
|
b89d56cc81 |
ANDROID: GKI: add some padding to some driver core structures
These structures are fundamental to implementing fw_devlink and sync_state(). Since they are still evolving, add some padding in case we need to backport any important bug fixes. struct device_link struct class struct fwnode_handle struct fwnode_link Bug: 183615740 Signed-off-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: Id9daf7cf9ae5d94fb0134144f8220a241ccbaef8 |
||
|
|
c16539ef98 |
device property: Allow error pointer to be passed to fwnode APIs
[ Upstream commit 002752af7b89b74c64fe6bec8c5fde3d3a7810d8 ]
Some of the fwnode APIs might return an error pointer instead of NULL
or valid fwnode handle. The result of such API call may be considered
optional and hence the test for it is usually done in a form of
fwnode = fwnode_find_reference(...);
if (IS_ERR(fwnode))
...error handling...
Nevertheless the resulting fwnode may have bumped the reference count
and hence caller of the above API is obliged to call fwnode_handle_put().
Since fwnode may be not valid either as NULL or error pointer the check
has to be performed there. This approach uglifies the code and adds
a point of making a mistake, i.e. forgetting about error point case.
To prevent this, allow an error pointer to be passed to the fwnode APIs.
Fixes:
|
||
|
|
5501765a02 |
driver core: fw_devlink: Add support for FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD
If a parent device is also a supplier to a child device, fw_devlink=on by
design delays the probe() of the child device until the probe() of the
parent finishes successfully.
However, some drivers of such parent devices (where parent is also a
supplier) expect the child device to finish probing successfully as soon as
they are added using device_add() and before the probe() of the parent
device has completed successfully. One example of such a case is discussed
in the link mentioned below.
Add a flag to make fw_devlink=on not enforce these supplier-consumer
relationships, so these drivers can continue working.
Link: https://lore.kernel.org/netdev/CAGETcx_uj0V4DChME-gy5HGKTYnxLBX=TH2rag29f_p=UcG+Tg@mail.gmail.com/
Fixes:
|
||
|
|
28ec344bb8 |
usb: typec: tcpm: Don't block probing of consumers of "connector" nodes
fw_devlink expects DT device nodes with "compatible" property to have
struct devices created for them. Since the connector node might not be
populated as a device, mark it as such so that fw_devlink knows not to
wait on this fwnode being populated as a struct device.
Without this patch, USB functionality can be broken on some boards.
Fixes:
|
||
|
|
7ac1161c27 |
Merge tag 'driver-core-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core / debugfs update from Greg KH:
"Here is the "big" driver core and debugfs update for 5.12-rc1
This set of driver core patches caused a bunch of problems in
linux-next for the past few weeks, when Saravana tried to set
fw_devlink=on as the default functionality. This caused a number of
systems to stop booting, and lots of bugs were fixed in this area for
almost all of the reported systems, but this option is not ready to be
turned on just yet for the default operation based on this testing, so
I've reverted that change at the very end so we don't have to worry
about regressions in 5.12
We will try to turn this on for 5.13 if testing goes better over the
next few months.
Other than the fixes caused by the fw_devlink testing in here, there's
not much more:
- debugfs fixes for invalid input into debugfs_lookup()
- kerneldoc cleanups
- warn message if platform drivers return an error on their remove
callback (a futile effort, but good to catch).
All of these have been in linux-next for a while now, and the
regressions have gone away with the revert of the fw_devlink change"
* tag 'driver-core-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
Revert "driver core: Set fw_devlink=on by default"
of: property: fw_devlink: Ignore interrupts property for some configs
debugfs: do not attempt to create a new file before the filesystem is initalized
debugfs: be more robust at handling improper input in debugfs_lookup()
driver core: auxiliary bus: Fix calling stage for auxiliary bus init
of: irq: Fix the return value for of_irq_parse_one() stub
of: irq: make a stub for of_irq_parse_one()
clk: Mark fwnodes when their clock provider is added/removed
PM: domains: Mark fwnodes when their powerdomain is added/removed
irqdomain: Mark fwnodes when their irqdomain is added/removed
driver core: fw_devlink: Handle suppliers that don't use driver core
of: property: Add fw_devlink support for optional properties
driver core: Add fw_devlink.strict kernel param
of: property: Don't add links to absent suppliers
driver core: fw_devlink: Detect supplier devices that will never be added
driver core: platform: Emit a warning if a remove callback returned non-zero
of: property: Fix fw_devlink handling of interrupts/interrupts-extended
gpiolib: Don't probe gpio_device if it's not the primary device
device.h: Remove bogus "the" in kerneldoc
gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default
...
|
||
|
|
74c782cff7 |
driver core: fw_devlink: Handle suppliers that don't use driver core
Device links only work between devices that use the driver core to match and bind a driver to a device. So, add an API for frameworks to let the driver core know that a fwnode has been initialized by a driver without using the driver core. Then use this information to make sure that fw_devlink doesn't make the consumers wait indefinitely on suppliers that'll never bind to a driver. Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210205222644.2357303-6-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
19d0f5f6bf |
driver core: Add fw_devlink.strict kernel param
This param allows forcing all dependencies to be treated as mandatory. This will be useful for boards in which all optional dependencies like IOMMUs and DMAs need to be treated as mandatory dependencies. Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210205222644.2357303-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
9528e0d9c1 |
driver core: fw_devlink: Detect supplier devices that will never be added
During the initial parsing of firmware by fw_devlink, fw_devlink might
infer that some supplier firmware nodes would get populated as devices.
But the inference is not always correct. This patch tries to logically
detect and fix such mistakes as boot progresses or more devices probe.
fw_devlink makes a fundamental assumption that once a device binds to a
driver, it will populate (i.e: add as struct devices) all the child
firmware nodes that could be populated as devices (if they aren't
populated already).
So, whenever a device probes, we check all its child firmware nodes. If
a child firmware node has a corresponding device populated, we don't
modify the child node or its descendants. However, if a child firmware
node has not been populated as a device, we delete all the fwnode links
where the child node or its descendants are suppliers. This ensures that
no other device is blocked on a firmware node that will never be
populated as a device. We also mark such fwnodes as NOT_DEVICE, so that
no new fwnode links are created with these nodes as suppliers.
Fixes:
|
||
|
|
529b56a854 |
media: device property: Define format macros for ports and endpoints
OF, ACPI and software_nodes all implement graphs including nodes for ports and endpoints. These are all intended to be named with a common schema, as "port@n" and "endpoint@n" where n is an unsigned int representing the index of the node. To ensure commonality across the subsystems, provide a set of macros to define the format. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
||
|
|
2d09e6eb4a |
driver core: Delete pointless parameter in fwnode_operations.add_links
The struct device input to add_links() is not used for anything. So delete it. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201121020232.908850-18-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
c2c724c868 |
driver core: Add fw_devlink_parse_fwtree()
This function is a wrapper around fwnode_operations.add_links(). This function parses each node in a fwnode tree and create fwnode links for each of those nodes. The information for creating the fwnode links (the supplier and consumer fwnode) is obtained by parsing the properties in each of the fwnodes. This function also ensures that no fwnode is parsed more than once by marking the fwnodes as parsed. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201121020232.908850-13-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
04f63c213b |
driver core: Redefine the meaning of fwnode_operations.add_links()
Change the meaning of fwnode_operations.add_links() to just create fwnode links by parsing the properties of a given fwnode. This patch doesn't actually make any code changes. To keeps things more digestable, the actual functional changes come in later patches in this series. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201121020232.908850-12-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
7b337cb3eb |
driver core: Add fwnode link support
Add support for creating supplier-consumer links between fwnodes. It is intended for internal use the driver core and generic firmware support code (eg. Device Tree, ACPI), so it is simple by design and the API provided is limited. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201121020232.908850-9-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
01bb86b380 |
driver core: Add fwnode_init()
There are multiple locations in the kernel where a struct fwnode_handle is initialized. Add fwnode_init() so that we have one way of initializing a fwnode_handle. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201121020232.908850-8-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
c84b90909e |
Revert "driver core: fw_devlink: Add support for batching fwnode parsing"
This reverts commit
|
||
|
|
716a7a2596 |
driver core: fw_devlink: Add support for batching fwnode parsing
The amount of time spent parsing fwnodes of devices can become really high if the devices are added in an non-ideal order. Worst case can be O(N^2) when N devices are added. But this can be optimized to O(N) by adding all the devices and then parsing all their fwnodes in one batch. This commit adds fw_devlink_pause() and fw_devlink_resume() to allow doing this. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20200515053500.215929-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
8375e74f2b |
driver core: Add fw_devlink kernel commandline option
fwnode_operations.add_links allows creating device links from information provided by firmware. fwnode_operations.add_links is currently implemented only by OF/devicetree code and a specific case of efi. However, there's nothing preventing ACPI or other firmware types from implementing it. The OF implementation is currently controlled by a kernel commandline parameter called of_devlink. Since this feature is generic isn't limited to OF, add a generic fw_devlink kernel commandline parameter to control this feature across firmware types. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20200222014038.180923-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
9a3d7fd275 |
Merge tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH: "Here is the "big" set of driver core patches for 5.5-rc1 There's a few minor cleanups and fixes in here, but the majority of the patches in here fall into two buckets: - debugfs api cleanups and fixes - driver core device link support for boot dependancy issues The debugfs api cleanups are working to slowly refactor the debugfs apis so that it is even harder to use incorrectly. That work has been happening for the past few kernel releases and will continue over time, it's a long-term project/goal The driver core device link support missed 5.4 by just a bit, so it's been sitting and baking for many months now. It's from Saravana Kannan to help resolve the problems that DT-based systems have at boot time with dependancy graphs and kernel modules. Turns out that no one has actually tried to build a generic arm64 kernel with loads of modules and have it "just work" for a variety of platforms (like a distro kernel). The big problem turned out to be a lack of dependency information between different areas of DT entries, and the work here resolves that problem and now allows devices to boot properly, and quicker than a monolith kernel. All of these patches have been in linux-next for a long time with no reported issues" * tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (68 commits) tracing: Remove unnecessary DEBUG_FS dependency of: property: Add device link support for interrupt-parent, dmas and -gpio(s) debugfs: Fix !DEBUG_FS debugfs_create_automount of: property: Add device link support for "iommu-map" of: property: Fix the semantics of of_is_ancestor_of() i2c: of: Populate fwnode in of_i2c_get_board_info() drivers: base: Fix Kconfig indentation firmware_loader: Fix labels with comma for builtin firmware driver core: Allow device link operations inside sync_state() driver core: platform: Declare ret variable only once cpu-topology: declare parse_acpi_topology in <linux/arch_topology.h> crypto: hisilicon: no need to check return value of debugfs_create functions driver core: platform: use the correct callback type for bus_find_device firmware_class: make firmware caching configurable driver core: Clarify documentation for fwnode_operations.add_links() mailbox: tegra: Fix superfluous IRQ error message net: caif: Fix debugfs on 64-bit platforms mac80211: Use debugfs_create_xul() helper media: c8sectpfe: no need to check return value of debugfs_create functions of: property: Add device link support for iommus, mboxes and io-channels ... |
||
|
|
bee3bbe616 |
driver core: Clarify documentation for fwnode_operations.add_links()
The wording was a bit ambiguous. So update it to make it clear. Signed-off-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20191113023559.62295-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
03324507e6 |
driver core: Allow fwnode_operations.add_links to differentiate errors
When add_links() still has suppliers that it needs to link to in the future, this patch allows it to differentiate between suppliers that are needed for probing vs suppliers that are needed for sync_state() correctness. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20191028220027.251605-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
92df01e360 |
driver: core: Improve documentation for fwnode_operations.add_links()
The add_links() ops shouldn't return on the first failed device link add. It needs to continue trying to add device links to other suppliers that are available. The documentation didn't explain WHY this behavior is necessary. So, update the documentation with an example that explains why this is necessary. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20191011191521.179614-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
8ed61d3605 |
device property: Fix the description of struct fwnode_operations
Adding description for the device_is_available member which was missing, and fixing the description of the member property_read_int_array. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
e7e242bccb |
device property: Add a function to obtain a node's prefix
The prefix is used for printing purpose before a node, and it also works as a separator between two nodes. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> (for OF) Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
bc0500c1e4 |
device property: Add fwnode_get_name for returning the name of a node
The fwnode framework did not have means to obtain the name of a node. Add that now, in form of the fwnode_get_name() function and a corresponding get_name fwnode op. OF and ACPI support is included. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> (for OF) Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
e2ae9bcc4a |
driver core: Add support for linking devices during device addition
The firmware corresponding to a device (dev.fwnode) might be able to provide functional dependency information between a device and its supplier and consumer devices. Tracking this functional dependency allows optimizing device probe order and informing a supplier when all its consumers have probed (and thereby actively managing their resources). The existing device links feature allows tracking and using supplier-consumer relationships. So, this patch adds the add_links() fwnode callback to allow firmware to create device links for each device as the device is added. However, when consumer devices are added, they might not have a supplier device to link to despite needing mandatory resources/functionality from one or more suppliers. A waiting_for_suppliers list is created to track such consumers and retry linking them when new devices get added. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
372a67c0c5 |
driver core: Add fwnode_to_dev() to look up device from fwnode
It's often useful to look up a device that corresponds to a fwnode. So add an API to do that irrespective of the bus on which the device has been added to. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20190904211126.47518-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
149f3b8784 |
device property: Remove duplicate test for NULL
There is no need to check twice for a NULL in fwnode_call_bool_op(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
d2912cb15b |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
977d5ad39f |
ACPI: Convert ACPI reference args to generic fwnode reference args
Convert all users of struct acpi_reference_args to more generic
fwnode_reference_args. This will
1) avoid an ACPI specific references to device nodes with integer
arguments as well as
2) allow making references to nodes other than device nodes in ACPI.
As a by-product, convert the fwnode interger arguments to u64. The
arguments were 64-bit integers on ACPI but the fwnode arguments were
just 32-bit.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|
|
67dcc26d20 |
device property: Constify device_get_match_data()
Constify device_get_match_data() as OF and ACPI variants return constant value. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
b283f15761 |
device property: Introduce a common API to fetch device match data
There is an OF/ACPI function to obtain the driver data. We want to hide OF/ACPI details from the device drivers and abstract following the device family of functions. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> |
||
|
|
cf89a31ca5 |
device property: Make fwnode_handle_get() return the fwnode
The fwnode_handle_get() function is used to obtain a reference to an fwnode. A common usage pattern for the OF equivalent of the function is: mynode = of_node_get(node); Similarly make fwnode_handle_get() return the fwnode to which the reference was obtained. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
3e3119d308 |
device property: Introduce fwnode_property_get_reference_args
The new fwnode_property_get_reference_args() interface amends the fwnode property API with the functionality of both of_parse_phandle_with_args() and __acpi_node_get_property_reference(). The semantics is slightly different: the cells property is ignored on ACPI as the number of arguments can be explicitly obtained from the firmware interface. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
37ba983cfb |
device property: Constify fwnode property API
Make fwnode arguments to the fwnode property API const. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
db3e50f323 |
device property: Get rid of struct fwnode_handle type field
Instead of relying on the struct fwnode_handle type field, define fwnode_operations structs for all separate types of fwnodes. To find out the type, compare to the ops field to relevant ops structs. This change has two benefits: 1. it avoids adding the type field to each and every instance of struct fwnode_handle, thus saving memory and 2. makes the ops field the single factor that defines both the types of the fwnode as well as defines the implementation of its operations, decreasing the possibility of bugs when developing code dealing with fwnode internals. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
e8158b486d |
device property: Introduce fwnode_call_bool_op() for ops that return bool
fwnode_call_int_op() isn't suitable for calling ops that return bool since it effectively causes the result returned to the user to be true when an op hasn't been defined or the fwnode is NULL. Address this by introducing fwnode_call_bool_op() for calling ops that return bool. Fixes: |
||
|
|
2294b3af05 |
device property: Introduce fwnode_device_is_available()
Add fwnode_device_is_available() to tell whether the device corresponding to a certain fwnode_handle is available for use. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
3b27d00e7b |
device property: Move fwnode graph ops to firmware specific locations
Move firmware specific implementations of the fwnode graph operations to firmware specific locations. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
3708184afc |
device property: Move FW type specific functionality to FW specific files
The device and fwnode property API supports Devicetree, ACPI and pset
properties. The implementation of this functionality for each firmware
type was embedded in the fwnode property core. Move it out to firmware
type specific locations, making it easier to maintain.
Depends-on: ("of: Move OF property and graph API from base.c to property.c")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|
|
2bd5452d46 |
device property: Add support for fwnode endpoints
Similar to OF endpoints, endpoint type nodes can be also supported on ACPI. In order to make it possible for drivers to ignore the matter, add a type for fwnode_endpoint and a function to parse them. On ACPI, find the child node index instead of relying on the "endpoint" property. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
027b25b264 |
ACPI: Add FWNODE_ACPI_STATIC fwnode type
On systems booting with a device tree, every struct device is associated with a struct device_node, that provides its DT firmware representation. The device node can be used in generic kernel contexts (eg IRQ translation, IOMMU streamid mapping), to retrieve the properties associated with the device and carry out kernel operations accordingly. Owing to the 1:1 relationship between the device and its device_node, the device_node can also be used as a look-up token for the device (eg looking up a device through its device_node), to retrieve the device in kernel paths where the device_node is available. On systems booting with ACPI, the same abstraction provided by the device_node is required to provide look-up functionality. The struct acpi_device, that represents firmware objects in the ACPI namespace already includes a struct fwnode_handle of type FWNODE_ACPI as their member; the same abstraction is missing though for devices that are instantiated out of static ACPI tables entries (eg ARM SMMU devices). Add a new fwnode_handle type to associate devices created out of static ACPI table entries to the respective firmware components and create a simple ACPI core layer interface to dynamically allocate and free the corresponding firmware nodes so that kernel subsystems can use it to instantiate the nodes and associate them with the respective devices. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Tomasz Nowicki <tn@semihalf.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Tomasz Nowicki <tn@semihalf.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
|
0d51ce9ca1 |
Merge tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"Quite a new features are included this time.
First off, the Collaborative Processor Performance Control interface
(version 2) defined by ACPI will now be supported on ARM64 along with
a cpufreq frontend for CPU performance scaling.
Second, ACPI gets a new infrastructure for the early probing of IRQ
chips and clock sources (along the lines of the existing similar
mechanism for DT).
Next, the ACPI core and the generic device properties API will now
support a recently introduced hierarchical properties extension of the
_DSD (Device Specific Data) ACPI device configuration object. If the
ACPI platform firmware uses that extension to organize device
properties in a hierarchical way, the kernel will automatically handle
it and make those properties available to device drivers via the
generic device properties API.
It also will be possible to build the ACPICA's AML interpreter
debugger into the kernel now and use that to diagnose AML-related
problems more efficiently. In the future, this should make it
possible to single-step AML execution and do similar things.
Interesting stuff, although somewhat experimental at this point.
Finally, the PM core gets a new mechanism that can be used by device
drivers to distinguish between suspend-to-RAM (based on platform
firmware support) and suspend-to-idle (or other variants of system
suspend the platform firmware is not involved in) and possibly
optimize their device suspend/resume handling accordingly.
In addition to that, some existing features are re-organized quite
substantially.
First, the ACPI-based handling of PCI host bridges on x86 and ia64 is
unified and the common code goes into the ACPI core (so as to reduce
code duplication and eliminate non-essential differences between the
two architectures in that area).
Second, the Operating Performance Points (OPP) framework is
reorganized to make the code easier to find and follow.
Next, the cpufreq core's sysfs interface is reorganized to get rid of
the "primary CPU" concept for configurations in which the same
performance scaling settings are shared between multiple CPUs.
Finally, some interfaces that aren't necessary any more are dropped
from the generic power domains framework.
On top of the above we have some minor extensions, cleanups and bug
fixes in multiple places, as usual.
Specifics:
- ACPICA update to upstream revision 20150930 (Bob Moore, Lv Zheng).
The most significant change is to allow the AML debugger to be
built into the kernel. On top of that there is an update related
to the NFIT table (the ACPI persistent memory interface) and a few
fixes and cleanups.
- ACPI CPPC2 (Collaborative Processor Performance Control v2) support
along with a cpufreq frontend (Ashwin Chaugule).
This can only be enabled on ARM64 at this point.
- New ACPI infrastructure for the early probing of IRQ chips and
clock sources (Marc Zyngier).
- Support for a new hierarchical properties extension of the ACPI
_DSD (Device Specific Data) device configuration object allowing
the kernel to handle hierarchical properties (provided by the
platform firmware this way) automatically and make them available
to device drivers via the generic device properties interface
(Rafael Wysocki).
- Generic device properties API extension to obtain an index of
certain string value in an array of strings, along the lines of
of_property_match_string(), but working for all of the supported
firmware node types, and support for the "dma-names" device
property based on it (Mika Westerberg).
- ACPI core fix to parse the MADT (Multiple APIC Description Table)
entries in the order expected by platform firmware (and mandated by
the specification) to avoid confusion on systems with more than 255
logical CPUs (Lukasz Anaczkowski).
- Consolidation of the ACPI-based handling of PCI host bridges on x86
and ia64 (Jiang Liu).
- ACPI core fixes to ensure that the correct IRQ number is used to
represent the SCI (System Control Interrupt) in the cases when it
has been re-mapped (Chen Yu).
- New ACPI backlight quirk for Lenovo IdeaPad S405 (Hans de Goede).
- ACPI EC driver fixes (Lv Zheng).
- Assorted ACPI fixes and cleanups (Dan Carpenter, Insu Yun, Jiri
Kosina, Rami Rosen, Rasmus Villemoes).
- New mechanism in the PM core allowing drivers to check if the
platform firmware is going to be involved in the upcoming system
suspend or if it has been involved in the suspend the system is
resuming from at the moment (Rafael Wysocki).
This should allow drivers to optimize their suspend/resume handling
in some cases and the changes include a couple of users of it (the
i8042 input driver, PCI PM).
- PCI PM fix to prevent runtime-suspended devices with PME enabled
from being resumed during system suspend even if they aren't
configured to wake up the system from sleep (Rafael Wysocki).
- New mechanism to report the number of a wakeup IRQ that woke up the
system from sleep last time (Alexandra Yates).
- Removal of unused interfaces from the generic power domains
framework and fixes related to latency measurements in that code
(Ulf Hansson, Daniel Lezcano).
- cpufreq core sysfs interface rework to make it handle CPUs that
share performance scaling settings (represented by a common cpufreq
policy object) more symmetrically (Viresh Kumar).
This should help to simplify the CPU offline/online handling among
other things.
- cpufreq core fixes and cleanups (Viresh Kumar).
- intel_pstate fixes related to the Turbo Activation Ratio (TAR)
mechanism on client platforms which causes the turbo P-states range
to vary depending on platform firmware settings (Srinivas
Pandruvada).
- intel_pstate sysfs interface fix (Prarit Bhargava).
- Assorted cpufreq driver (imx, tegra20, powernv, integrator) fixes
and cleanups (Bai Ping, Bartlomiej Zolnierkiewicz, Shilpasri G
Bhat, Luis de Bethencourt).
- cpuidle mvebu driver cleanups (Russell King).
- OPP (Operating Performance Points) framework code reorganization to
make it more maintainable (Viresh Kumar).
- Intel Broxton support for the RAPL (Running Average Power Limits)
power capping driver (Amy Wiles).
- Assorted power management code fixes and cleanups (Dan Carpenter,
Geert Uytterhoeven, Geliang Tang, Luis de Bethencourt, Rasmus
Villemoes)"
* tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (108 commits)
cpufreq: postfix policy directory with the first CPU in related_cpus
cpufreq: create cpu/cpufreq/policyX directories
cpufreq: remove cpufreq_sysfs_{create|remove}_file()
cpufreq: create cpu/cpufreq at boot time
cpufreq: Use cpumask_copy instead of cpumask_or to copy a mask
cpufreq: ondemand: Drop unnecessary locks from update_sampling_rate()
PM / Domains: Merge measurements for PM QoS device latencies
PM / Domains: Don't measure ->start|stop() latency in system PM callbacks
PM / clk: Fix broken build due to non-matching code and header #ifdefs
ACPI / Documentation: add copy_dsdt to ACPI format options
ACPI / sysfs: correctly check failing memory allocation
ACPI / video: Add a quirk to force native backlight on Lenovo IdeaPad S405
ACPI / CPPC: Fix potential memory leak
ACPI / CPPC: signedness bug in register_pcc_channel()
ACPI / PAD: power_saving_thread() is not freezable
ACPI / PM: Fix incorrect wakeup IRQ setting during suspend-to-idle
ACPI: Using correct irq when waiting for events
ACPI: Use correct IRQ when uninstalling ACPI interrupt handler
cpuidle: mvebu: disable the bind/unbind attributes and use builtin_platform_driver
cpuidle: mvebu: clean up multiple platform drivers
...
|
||
|
|
b145dcc45a |
irqdomain: Add a fwnode_handle allocator
In order to be able to reference an irqdomain from ACPI, we need to be able to create an identifier, which is usually a struct device_node. This device node does't really fit the ACPI infrastructure, so we cunningly allocate a new structure containing a fwnode_handle, and return that. This structure doesn't really point to a device (interrupt controllers are not "real" devices in Linux), but as we cannot really deny that they exist, we create them with a new fwnode_type (FWNODE_IRQCHIP). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-9-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
||
|
|
445b0eb058 |
ACPI / property: Add support for data-only subnodes
In some cases, the information expressed via device properties is hierarchical by nature. For example, the properties of a composite device consisting of multiple semi-dependent components may need to be represented in the form of a tree of property data sets corresponding to specific components of the device. Unfortunately, using ACPI device objects for this purpose turns out to be problematic, mostly due to the assumption made by some operating systems (that platform firmware generally needs to work with) that each device object in the ACPI namespace represents a device requiring a separate driver. That assumption leads to complications which reportedly are impractically difficult to overcome and a different approach is needed for the sake of interoperability. The approach implemented here is based on extending _DSD via pointers (links) to additional ACPI objects returning data packages formatted in accordance with the _DSD formatting rules defined by Section 6.2.5 of ACPI 6. Those additional objects are referred to as data-only subnodes of the device object containing the _DSD pointing to them. The links to them need to be located in a separate section of the _DSD data package following UUID dbb8e3e6-5886-4ba6-8795-1319f52a966b referred to as the Hierarchical Data Extension UUID as defined in [1]. Each of them is represented by a package of two strings. The first string in that package (the key) is regarded as the name of the data-only subnode pointed to by the link. The second string in it (the target) is expected to hold the ACPI namespace path (possibly utilizing the usual ACPI namespace search rules) of an ACPI object evaluating to a data package extending the _DSD. The device properties initialization code follows those links, creates a struct acpi_data_node object for each of them to store the data returned by the ACPI object pointed to by it and processes those data recursively (which may lead to the creation of more struct acpi_data_node objects if the returned data package contains the Hierarchical Data Extension UUID section with more links in it). All of the struct acpi_data_node objects are present until the the ACPI device object containing the _DSD with links to them is deleted and they are deleted along with that object. [1]: http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.pdf Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
||
|
|
16ba08d5c9 |
device property: Introduce firmware node type for platform data
Introduce data structures and code allowing "built-in" properties to be associated with devices in such a way that they will be used by the device_property_* API if no proper firmware node (neither DT nor ACPI) is present for the given device. Each property is to be represented by a property_entry structure. An array of property_entry structures (terminated with a null entry) can be pointed to by the properties field of struct property_set that can be added as a firmware node to a struct device using device_add_property_set(). That will cause the device_property_* API to use that property_set as the source of properties if the given device does not have a DT node or an ACPI companion device object associated with it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
|
97badf873a |
device property: Make it possible to use secondary firmware nodes
Add a secondary pointer to struct fwnode_handle so as to make it
possible for a device to have two firmware nodes associated with
it at the same time, for example, an ACPI node and a node with
a set of properties provided by platform initialization code.
In the future that will allow device property lookup to fall back
from the primary firmware node to the secondary one if the given
property is not present there to make it easier to provide defaults
for device properties used by device drivers.
Introduce two helper routines, set_primary_fwnode() and
set_secondary_fwnode() allowing callers to add a primary/secondary
firmware node to the given device in such a way that
(1) If there's only one firmware node for that device, it will be
pointed to by the device's firmware node pointer.
(2) If both the primary and secondary firmware nodes are present,
the primary one will be pointed to by the device's firmware
node pointer, while the secondary one will be pointed to by the
primary node's secondary pointer.
(3) If one of these nodes is removed (by calling one of the new
nelpers with NULL as the second argument), the other one will
be preserved.
Make ACPI use set_primary_fwnode() for attaching its firmware nodes
to devices.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
|
ce793486e2 |
driver core / ACPI: Represent ACPI companions using fwnode_handle
Now that we have struct fwnode_handle, we can use that to point to ACPI companions from struct device objects instead of pointing to struct acpi_device directly. There are two benefits from that. First, the somewhat ugly and hackish struct acpi_dev_node can be dropped and, second, the same struct fwnode_handle pointer can be used in the future to point to other (non-ACPI) firmware device node types. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Grant Likely <grant.likely@linaro.org> |