Changes in 5.15.71
drm/amdgpu: Separate vf2pf work item init from virt data exchange
drm/amdgpu: make sure to init common IP before gmc
staging: r8188eu: Remove support for devices with 8188FU chipset (0bda:f179)
staging: r8188eu: Add Rosewill USB-N150 Nano to device tables
usb: dwc3: gadget: Avoid starting DWC3 gadget during UDC unbind
usb: dwc3: Issue core soft reset before enabling run/stop
usb: dwc3: gadget: Prevent repeat pullup()
usb: dwc3: gadget: Refactor pullup()
usb: dwc3: gadget: Don't modify GEVNTCOUNT in pullup()
usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop
usb: add quirks for Lenovo OneLink+ Dock
usb: gadget: udc-xilinx: replace memcpy with memcpy_toio
Revert "usb: add quirks for Lenovo OneLink+ Dock"
Revert "usb: gadget: udc-xilinx: replace memcpy with memcpy_toio"
drivers/base: Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES
USB: core: Fix RST error in hub.c
USB: serial: option: add Quectel BG95 0x0203 composition
USB: serial: option: add Quectel RM520N
Revert "ALSA: usb-audio: Split endpoint setups for hw_params and prepare"
ALSA: core: Fix double-free at snd_card_new()
ALSA: hda/tegra: set depop delay for tegra
ALSA: hda: add Intel 5 Series / 3400 PCI DID
ALSA: hda/realtek: Add quirk for Huawei WRT-WX9
ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5570 laptop
ALSA: hda/realtek: Re-arrange quirk table entries
ALSA: hda/realtek: Add pincfg for ASUS G513 HP jack
ALSA: hda/realtek: Add pincfg for ASUS G533Z HP jack
ALSA: hda/realtek: Add quirk for ASUS GA503R laptop
ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptop
iommu/vt-d: Check correct capability for sagaw determination
btrfs: fix hang during unmount when stopping block group reclaim worker
btrfs: fix hang during unmount when stopping a space reclaim worker
media: flexcop-usb: fix endpoint type check
usb: dwc3: core: leave default DMA if the controller does not support 64-bit DMA
thunderbolt: Add support for Intel Maple Ridge single port controller
efi: x86: Wipe setup_data on pure EFI boot
efi: libstub: check Shim mode using MokSBStateRT
wifi: mt76: fix reading current per-tid starting sequence number for aggregation
gpio: mockup: fix NULL pointer dereference when removing debugfs
gpio: mockup: Fix potential resource leakage when register a chip
gpiolib: cdev: Set lineevent_state::irq after IRQ register successfully
riscv: fix a nasty sigreturn bug...
kasan: call kasan_malloc() from __kmalloc_*track_caller()
can: flexcan: flexcan_mailbox_read() fix return value for drop = true
net: mana: Add rmb after checking owner bits
mm/slub: fix to return errno if kmalloc() fails
mm: slub: fix flush_cpu_slab()/__free_slab() invocations in task context.
KVM: x86: Inject #UD on emulated XSETBV if XSAVES isn't enabled
arm64: topology: fix possible overflow in amu_fie_setup()
vmlinux.lds.h: CFI: Reduce alignment of jump-table to function alignment
xfs: reorder iunlink remove operation in xfs_ifree
xfs: fix xfs_ifree() error handling to not leak perag ref
xfs: validate inode fork size against fork format
firmware: arm_scmi: Harden accesses to the reset domains
firmware: arm_scmi: Fix the asynchronous reset requests
arm64: dts: rockchip: Pull up wlan wake# on Gru-Bob
arm64: dts: rockchip: Fix typo in lisense text for PX30.Core
drm/mediatek: dsi: Add atomic {destroy,duplicate}_state, reset callbacks
arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHz
dmaengine: ti: k3-udma-private: Fix refcount leak bug in of_xudma_dev_get()
arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-puma
netfilter: nf_conntrack_sip: fix ct_sip_walk_headers
netfilter: nf_conntrack_irc: Tighten matching on DCC message
netfilter: nfnetlink_osf: fix possible bogus match in nf_osf_find()
ice: Don't double unplug aux on peer initiated reset
iavf: Fix cached head and tail value for iavf_get_tx_pending
ipvlan: Fix out-of-bound bugs caused by unset skb->mac_header
net: core: fix flow symmetric hash
net: phy: aquantia: wait for the suspend/resume operations to finish
scsi: qla2xxx: Fix memory leak in __qlt_24xx_handle_abts()
scsi: mpt3sas: Fix return value check of dma_get_required_mask()
net: bonding: Share lacpdu_mcast_addr definition
net: bonding: Unsync device addresses on ndo_stop
net: team: Unsync device addresses on ndo_stop
drm/panel: simple: Fix innolux_g121i1_l01 bus_format
MIPS: lantiq: export clk_get_io() for lantiq_wdt.ko
MIPS: Loongson32: Fix PHY-mode being left unspecified
um: fix default console kernel parameter
iavf: Fix bad page state
mlxbf_gige: clear MDIO gateway lock after read
iavf: Fix set max MTU size with port VLAN and jumbo frames
i40e: Fix VF set max MTU size
i40e: Fix set max_tx_rate when it is lower than 1 Mbps
sfc: fix TX channel offset when using legacy interrupts
sfc: fix null pointer dereference in efx_hard_start_xmit
drm/hisilicon/hibmc: Allow to be built if COMPILE_TEST is enabled
drm/hisilicon: Add depends on MMU
of: mdio: Add of_node_put() when breaking out of for_each_xx
net: ipa: properly limit modem routing table use
wireguard: ratelimiter: disable timings test by default
wireguard: netlink: avoid variable-sized memcpy on sockaddr
net: enetc: move enetc_set_psfp() out of the common enetc_set_features()
net: enetc: deny offload of tc-based TSN features on VF interfaces
net/sched: taprio: avoid disabling offload when it was never enabled
net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs
netfilter: nf_tables: fix nft_counters_enabled underflow at nf_tables_addchain()
netfilter: nf_tables: fix percpu memory leak at nf_tables_addchain()
netfilter: ebtables: fix memory leak when blob is malformed
net: ravb: Fix PHY state warning splat during system resume
net: sh_eth: Fix PHY state warning splat during system resume
can: gs_usb: gs_can_open(): fix race dev->can.state condition
perf stat: Fix BPF program section name
perf jit: Include program header in ELF files
perf kcore_copy: Do not check /proc/modules is unchanged
perf tools: Honor namespace when synthesizing build-ids
drm/mediatek: dsi: Move mtk_dsi_stop() call back to mtk_dsi_poweroff()
net/smc: Stop the CLC flow if no link to map buffers on
bonding: fix NULL deref in bond_rr_gen_slave_id
net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD
net: sched: fix possible refcount leak in tc_new_tfilter()
bnxt: prevent skb UAF after handing over to PTP worker
selftests: forwarding: add shebang for sch_red.sh
KVM: x86/mmu: Fold rmap_recycle into rmap_add
serial: fsl_lpuart: Reset prior to registration
serial: Create uart_xmit_advance()
serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting
serial: tegra-tcu: Use uart_xmit_advance(), fixes icount.tx accounting
s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup
drm/amd/amdgpu: fixing read wrong pf2vf data in SRIOV
Drivers: hv: Never allocate anything besides framebuffer from framebuffer memory region
drm/gma500: Fix BUG: sleeping function called from invalid context errors
drm/amd/pm: disable BACO entry/exit completely on several sienna cichlid cards
drm/amdgpu: use dirty framebuffer helper
drm/amd/display: Limit user regamma to a valid value
drm/amd/display: Reduce number of arguments of dml31's CalculateWatermarksAndDRAMSpeedChangeSupport()
drm/amd/display: Reduce number of arguments of dml31's CalculateFlipSchedule()
drm/amd/display: Mark dml30's UseMinimumDCFCLK() as noinline for stack usage
drm/rockchip: Fix return type of cdn_dp_connector_mode_valid
fsdax: Fix infinite loop in dax_iomap_rw()
workqueue: don't skip lockdep work dependency in cancel_work_sync()
i2c: imx: If pm_runtime_get_sync() returned 1 device access is possible
i2c: mlxbf: incorrect base address passed during io write
i2c: mlxbf: prevent stack overflow in mlxbf_i2c_smbus_start_transaction()
i2c: mlxbf: Fix frequency calculation
drm/amdgpu: don't register a dirty callback for non-atomic
NFSv4: Fixes for nfs4_inode_return_delegation()
devdax: Fix soft-reservation memory description
ext4: make directory inode spreading reflect flexbg size
ext4: fix bug in extents parsing when eh_entries == 0 and eh_depth > 0
ext4: limit the number of retries after discarding preallocations blocks
ext4: make mballoc try target group first even with mb_optimize_scan
ext4: avoid unnecessary spreading of allocations among groups
ext4: use locality group preallocation for small closed files
Linux 5.15.71
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I51916c0ad287a15f0b132f3a87c5c704de31b632
Changes in 5.15.56
ALSA: hda - Add fixup for Dell Latitidue E5430
ALSA: hda/conexant: Apply quirk for another HP ProDesk 600 G3 model
ALSA: hda/realtek: Fix headset mic for Acer SF313-51
ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671
ALSA: hda/realtek: fix mute/micmute LEDs for HP machines
ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc221
ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop
xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue
fix race between exit_itimers() and /proc/pid/timers
mm: userfaultfd: fix UFFDIO_CONTINUE on fallocated shmem pages
mm: split huge PUD on wp_huge_pud fallback
tracing/histograms: Fix memory leak problem
net: sock: tracing: Fix sock_exceed_buf_limit not to dereference stale pointer
ip: fix dflt addr selection for connected nexthop
ARM: 9213/1: Print message about disabled Spectre workarounds only once
ARM: 9214/1: alignment: advance IT state after emulating Thumb instruction
wifi: mac80211: fix queue selection for mesh/OCB interfaces
cgroup: Use separate src/dst nodes when preloading css_sets for migration
btrfs: return -EAGAIN for NOWAIT dio reads/writes on compressed and inline extents
drm/panfrost: Put mapping instead of shmem obj on panfrost_mmu_map_fault_addr() error
drm/panfrost: Fix shrinker list corruption by madvise IOCTL
fs/remap: constrain dedupe of EOF blocks
nilfs2: fix incorrect masking of permission flags for symlinks
sh: convert nommu io{re,un}map() to static inline functions
Revert "evm: Fix memleak in init_desc"
xfs: only run COW extent recovery when there are no live extents
xfs: don't include bnobt blocks when reserving free block pool
xfs: run callbacks before waking waiters in xlog_state_shutdown_callbacks
xfs: drop async cache flushes from CIL commits.
reset: Fix devm bulk optional exclusive control getter
ARM: dts: imx6qdl-ts7970: Fix ngpio typo and count
spi: amd: Limit max transfer and message size
ARM: 9209/1: Spectre-BHB: avoid pr_info() every time a CPU comes out of idle
ARM: 9210/1: Mark the FDT_FIXED sections as shareable
net/mlx5e: kTLS, Fix build time constant test in TX
net/mlx5e: kTLS, Fix build time constant test in RX
net/mlx5e: Fix enabling sriov while tc nic rules are offloaded
net/mlx5e: Fix capability check for updating vnic env counters
net/mlx5e: Ring the TX doorbell on DMA errors
drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector()
ima: Fix a potential integer overflow in ima_appraise_measurement
ASoC: sgtl5000: Fix noise on shutdown/remove
ASoC: tas2764: Add post reset delays
ASoC: tas2764: Fix and extend FSYNC polarity handling
ASoC: tas2764: Correct playback volume range
ASoC: tas2764: Fix amp gain register offset & default
ASoC: Intel: Skylake: Correct the ssp rate discovery in skl_get_ssp_clks()
ASoC: Intel: Skylake: Correct the handling of fmt_config flexible array
net: stmmac: dwc-qos: Disable split header for Tegra194
net: ethernet: ti: am65-cpsw: Fix devlink port register sequence
sysctl: Fix data races in proc_dointvec().
sysctl: Fix data races in proc_douintvec().
sysctl: Fix data races in proc_dointvec_minmax().
sysctl: Fix data races in proc_douintvec_minmax().
sysctl: Fix data races in proc_doulongvec_minmax().
sysctl: Fix data races in proc_dointvec_jiffies().
tcp: Fix a data-race around sysctl_tcp_max_orphans.
inetpeer: Fix data-races around sysctl.
net: Fix data-races around sysctl_mem.
cipso: Fix data-races around sysctl.
icmp: Fix data-races around sysctl.
ipv4: Fix a data-race around sysctl_fib_sync_mem.
ARM: dts: at91: sama5d2: Fix typo in i2s1 node
ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi Zero
arm64: dts: broadcom: bcm4908: Fix timer node for BCM4906 SoC
arm64: dts: broadcom: bcm4908: Fix cpu node for smp boot
netfilter: nf_log: incorrect offset to network header
netfilter: nf_tables: replace BUG_ON by element length check
drm/i915/gvt: IS_ERR() vs NULL bug in intel_gvt_update_reg_whitelist()
xen/gntdev: Ignore failure to unmap INVALID_GRANT_HANDLE
lockd: set fl_owner when unlocking files
lockd: fix nlm_close_files
tracing: Fix sleeping while atomic in kdb ftdump
drm/i915/selftests: fix a couple IS_ERR() vs NULL tests
drm/i915/dg2: Add Wa_22011100796
drm/i915/gt: Serialize GRDOM access between multiple engine resets
drm/i915/gt: Serialize TLB invalidates with GT resets
drm/i915/uc: correctly track uc_fw init failure
drm/i915: Require the vm mutex for i915_vma_bind()
bnxt_en: Fix bnxt_reinit_after_abort() code path
bnxt_en: Fix bnxt_refclk_read()
sysctl: Fix data-races in proc_dou8vec_minmax().
sysctl: Fix data-races in proc_dointvec_ms_jiffies().
icmp: Fix data-races around sysctl_icmp_echo_enable_probe.
icmp: Fix a data-race around sysctl_icmp_ignore_bogus_error_responses.
icmp: Fix a data-race around sysctl_icmp_errors_use_inbound_ifaddr.
icmp: Fix a data-race around sysctl_icmp_ratelimit.
icmp: Fix a data-race around sysctl_icmp_ratemask.
raw: Fix a data-race around sysctl_raw_l3mdev_accept.
tcp: Fix a data-race around sysctl_tcp_ecn_fallback.
ipv4: Fix data-races around sysctl_ip_dynaddr.
nexthop: Fix data-races around nexthop_compat_mode.
net: ftgmac100: Hold reference returned by of_get_child_by_name()
net: stmmac: fix leaks in probe
ima: force signature verification when CONFIG_KEXEC_SIG is configured
ima: Fix potential memory leak in ima_init_crypto()
drm/amd/display: Only use depth 36 bpp linebuffers on DCN display engines.
drm/amd/pm: Prevent divide by zero
sfc: fix use after free when disabling sriov
ceph: switch netfs read ops to use rreq->inode instead of rreq->mapping->host
seg6: fix skb checksum evaluation in SRH encapsulation/insertion
seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors
seg6: bpf: fix skb checksum in bpf_push_seg6_encap()
sfc: fix kernel panic when creating VF
net: atlantic: remove deep parameter on suspend/resume functions
net: atlantic: remove aq_nic_deinit() when resume
KVM: x86: Fully initialize 'struct kvm_lapic_irq' in kvm_pv_kick_cpu_op()
net/tls: Check for errors in tls_device_init
ACPI: video: Fix acpi_video_handles_brightness_key_presses()
mm: sysctl: fix missing numa_stat when !CONFIG_HUGETLB_PAGE
btrfs: rename btrfs_bio to btrfs_io_context
btrfs: zoned: fix a leaked bioc in read_zone_info
ksmbd: use SOCK_NONBLOCK type for kernel_accept()
powerpc/xive/spapr: correct bitmap allocation size
vdpa/mlx5: Initialize CVQ vringh only once
vduse: Tie vduse mgmtdev and its device
virtio_mmio: Add missing PM calls to freeze/restore
virtio_mmio: Restore guest page size on resume
netfilter: br_netfilter: do not skip all hooks with 0 priority
scsi: hisi_sas: Limit max hw sectors for v3 HW
cpufreq: pmac32-cpufreq: Fix refcount leak bug
platform/x86: hp-wmi: Ignore Sanitization Mode event
firmware: sysfb: Make sysfb_create_simplefb() return a pdev pointer
firmware: sysfb: Add sysfb_disable() helper function
fbdev: Disable sysfb device registration when removing conflicting FBs
net: tipc: fix possible refcount leak in tipc_sk_create()
NFC: nxp-nci: don't print header length mismatch on i2c error
nvme-tcp: always fail a request when sending it failed
nvme: fix regression when disconnect a recovering ctrl
net: sfp: fix memory leak in sfp_probe()
ASoC: ops: Fix off by one in range control validation
pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux()
ASoC: Realtek/Maxim SoundWire codecs: disable pm_runtime on remove
ASoC: rt711-sdca-sdw: fix calibrate mutex initialization
ASoC: Intel: sof_sdw: handle errors on card registration
ASoC: rt711: fix calibrate mutex initialization
ASoC: rt7*-sdw: harden jack_detect_handler
ASoC: codecs: rt700/rt711/rt711-sdca: initialize workqueues in probe
ASoC: SOF: Intel: hda-loader: Clarify the cl_dsp_init() flow
ASoC: wcd938x: Fix event generation for some controls
ASoC: Intel: bytcr_wm5102: Fix GPIO related probe-ordering problem
ASoC: wm5110: Fix DRE control
ASoC: rt711-sdca: fix kernel NULL pointer dereference when IO error
ASoC: dapm: Initialise kcontrol data for mux/demux controls
ASoC: cs47l15: Fix event generation for low power mux control
ASoC: madera: Fix event generation for OUT1 demux
ASoC: madera: Fix event generation for rate controls
irqchip: or1k-pic: Undefine mask_ack for level triggered hardware
x86: Clear .brk area at early boot
soc: ixp4xx/npe: Fix unused match warning
ARM: dts: stm32: use the correct clock source for CEC on stm32mp151
Revert "can: xilinx_can: Limit CANFD brp to 2"
ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devices
ALSA: usb-audio: Add quirk for Fiero SC-01
ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)
nvme-pci: phison e16 has bogus namespace ids
signal handling: don't use BUG_ON() for debugging
USB: serial: ftdi_sio: add Belimo device ids
usb: typec: add missing uevent when partner support PD
usb: dwc3: gadget: Fix event pending check
tty: serial: samsung_tty: set dma burst_size to 1
vt: fix memory overlapping when deleting chars in the buffer
serial: 8250: fix return error code in serial8250_request_std_resource()
serial: stm32: Clear prev values before setting RTS delays
serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle
serial: 8250: Fix PM usage_count for console handover
x86/pat: Fix x86_has_pat_wp()
drm/aperture: Run fbdev removal before internal helpers
Linux 5.15.56
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ib44efbedc8fea205005bd3ec2806ebb8cb19710d
commit f9b11229b79c0fb2100b5bb4628a101b1d37fbf6 upstream.
When console is enabled, univ8250_console_setup() calls
serial8250_console_setup() before .dev is set to uart_port. Therefore,
it will not call pm_runtime_get_sync(). Later, when the actual driver
is going to take over univ8250_console_exit() is called. As .dev is
already set, serial8250_console_exit() makes pm_runtime_put_sync() call
with usage count being zero triggering PM usage count warning
(extra debug for univ8250_console_setup(), univ8250_console_exit(), and
serial8250_register_ports()):
[ 0.068987] univ8250_console_setup ttyS0 nodev
[ 0.499670] printk: console [ttyS0] enabled
[ 0.717955] printk: console [ttyS0] printing thread started
[ 1.960163] serial8250_register_ports assigned dev for ttyS0
[ 1.976830] printk: console [ttyS0] disabled
[ 1.976888] printk: console [ttyS0] printing thread stopped
[ 1.977073] univ8250_console_exit ttyS0 usage:0
[ 1.977075] serial8250 serial8250: Runtime PM usage count underflow!
[ 1.977429] dw-apb-uart.6: ttyS0 at MMIO 0x4010006000 (irq = 33, base_baud = 115200) is a 16550A
[ 1.977812] univ8250_console_setup ttyS0 usage:2
[ 1.978167] printk: console [ttyS0] printing thread started
[ 1.978203] printk: console [ttyS0] enabled
To fix the issue, call pm_runtime_get_sync() in
serial8250_register_ports() as soon as .dev is set for an uart_port
if it has console enabled.
This problem became apparent only recently because 82586a721595 ("PM:
runtime: Avoid device usage count underflows") added the warning
printout. I confirmed this problem also occurs with v5.18 (w/o the
warning printout, obviously).
Fixes: bedb404e91 ("serial: 8250_port: Don't use power management for kernel console")
Cc: stable <stable@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/b4f428e9-491f-daf2-2232-819928dc276e@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a lot of different structures that need to have a "frozen" abi
for the next 5+ years. Add padding to a lot of them in order to be able
to handle any future changes that might be needed due to LTS and
security fixes that might come up.
It's a best guess, based on what has happened in the past from the
5.10.0..5.10.110 release (1 1/2 years). Yes, past changes do not mean
that future changes will also be needed in the same area, but that is a
hint that those areas are both well maintained and looked after, and
there have been previous problems found in them.
Also the list of structures that are being required based on OEM usage
in the android/ symbol lists were consulted as that's a larger list than
what has been changed in the past.
Hopefully we caught everything we need to worry about, only time will
tell...
Bug: 151154716
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I880bbcda0628a7459988eeb49d18655522697664
[ Upstream commit f58c252e30cf74f68b0054293adc03b5923b9f0e ]
When 8250 UART is using DMA, x_char (XON/XOFF) is never sent
to the wire. After this change, x_char is injected correctly.
Create uart_xchar_out() helper for sending the x_char out and
accounting related to it. It seems that almost every driver
does these same steps with x_char. Except for 8250, however,
almost all currently lack .serial_out so they cannot immediately
take advantage of this new helper.
The downside of this patch is that it might reintroduce
the problems some devices faced with mixed DMA/non-DMA transfer
which caused revert f967fc8f16 (Revert "serial: 8250_dma:
don't bother DMA with small transfers"). However, the impact
should be limited to cases with XON/XOFF (that didn't work
with DMA capable devices to begin with so this problem is not
very likely to cause a major issue, if any at all).
Fixes: 9ee4b83e51 ("serial: 8250: Add support for dmaengine")
Reported-by: Gilles Buloz <gilles.buloz@kontron.com>
Tested-by: Gilles Buloz <gilles.buloz@kontron.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220314091432.4288-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The 8250 handle_irq callback is not just called from the interrupt
handler but also from a timer callback when polling (e.g. for ports
without an interrupt line). Consequently the callback must explicitly
disable interrupts to avoid a potential deadlock with another interrupt
in polled mode.
Add back an irqrestore-version of the sysrq port-unlock helper and use
it in the 8250 callbacks that need it.
Fixes: 75f4e830fa ("serial: do not restore interrupt state in sysrq helper")
Cc: stable@vger.kernel.org # 5.13
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210714080427.28164-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Group the flow flags under a single struct called flow. The new struct
contains 'stopped' and 'tco_stopped' bools which used to be bits in a
bitfield. The struct also contains the lock protecting them to
potentially share the same cache line.
Note that commit c545b66c69 (tty: Serialize tcflow() with other tty
flow control changes) added a padding to the original bitfield. It was
for the bitfield to occupy a whole 64b word to avoid interferring stores
on Alpha (cannot we evaporate this arch with weird implications to C
code yet?). But it doesn't work as expected as the padding
(tty_struct::unused) is aligned to a 8B boundary too and occupies some
bytes from the next word.
So make it reliable by:
1) setting __aligned of the struct -- that aligns the start, and
2) making 'unsigned long unused[0]' as the last member of the struct --
pads the end.
This is also the perfect time to start the documentation of tty_struct
where all this lives. So we start by documenting what these bools
actually serve for. And why we do all the alignment dances. Only the few
up-to-date information from the Theodore's comment made it into this new
Kerneldoc comment.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: "Maciej W. Rozycki" <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/20210505091928.22010-13-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The uart_unlock_and_check_sysrq() helper can be used to defer processing
of sysrq until the interrupt handler has released the port lock and is
about to return.
Since commit 81e2073c17 ("genirq: Disable interrupts for force
threaded handlers") interrupt handlers that are not explicitly requested
as threaded are always called with interrupts disabled and there is no
need to save the interrupt state when taking the port lock.
Instead of adding another sysrq helper for when the interrupt state has
not needlessly been saved, drop the state parameter from
uart_unlock_and_check_sysrq() and update its callers to no longer
explicitly disable interrupts in their interrupt handlers.
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210416140557.25177-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using the array-of-pointers trick to avoid having gcc mess up
the earlycon array stride, specify type alignment when declaring entries
to prevent gcc from increasing alignment.
This is essentially an alternative (one-line) fix to the problem
addressed by commit dd709e72cb ("earlycon: Use a pointer table to fix
__earlycon_table stride").
gcc can increase the alignment of larger objects with static extent as
an optimisation, but this can be suppressed by using the aligned
attribute when declaring variables.
Note that we have been relying on this behaviour for kernel parameters
for 16 years and it indeed hasn't changed since the introduction of the
aligned attribute in gcc-3.1.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20201123102319.8090-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the port-lock initialisation regression introduced by commit
a3cb39d258 ("serial: core: Allow detach and attach serial device for
console") by making sure that the lock is again initialised during
console setup.
The console may be registered before the serial controller has been
probed in which case the port lock needs to be initialised during
console setup by a call to uart_set_options(). The console-detach
changes introduced a regression in several drivers by effectively
removing that initialisation by not initialising the lock when the port
is used as a console (which is always the case during console setup).
Add back the early lock initialisation and instead use a new
console-reinit flag to handle the case where a console is being
re-attached through sysfs.
The question whether the console-detach interface should have been added
in the first place is left for another discussion.
Note that the console-enabled check in uart_set_options() is not
redundant because of kgdboc, which can end up reinitialising an already
enabled console (see commit 42b6a1baa3 ("serial_core: Don't
re-initialize a previously initialized spinlock.")).
Fixes: a3cb39d258 ("serial: core: Allow detach and attach serial device for console")
Cc: stable <stable@vger.kernel.org> # 5.7
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200909143101.15389-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 8e20fc3917 ("serial_core: Move sysrq functions from header
file") converted the inline sysrq helpers to exported functions which
are now called for every received character, interrupt and break signal
also on systems without CONFIG_MAGIC_SYSRQ_SERIAL instead of being
optimised away by the compiler.
Inlining these helpers again also avoids the function call overhead when
CONFIG_MAGIC_SYSRQ_SERIAL is enabled (e.g. when the port is not used as
a console).
Fixes: 8e20fc3917 ("serial_core: Move sysrq functions from header file")
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20200610152232.16925-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit e8759ad17d ("serial: uapi: Add support for bus termination")
introduced the ability to enable rs485 bus termination from user space.
So far the feature is only used by a single driver, 8250_exar.c, using a
hardcoded GPIO pin specific to Siemens IOT2040 products.
Provide for a more generic solution by allowing specification of an
rs485 bus termination GPIO pin in the device tree: Amend the serial
core to retrieve the GPIO from the device tree (or ACPI table) and amend
the default ->rs485_config() callback for 8250 drivers to change the
GPIO on request from user space.
Perhaps 8250_exar.c can be converted to the generic approach in a
follow-up patch.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/94c6c800d1ca9fa04766dd1d43a8272c5ad4bedd.1589811297.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We're about to amend uart_get_rs485_mode() to support a GPIO pin for
rs485 bus termination. Retrieving the GPIO descriptor may fail, so
allow uart_get_rs485_mode() to return an errno and change all callers
to check for failure.
The GPIO descriptor is going to be stored in struct uart_port. Pass
that struct to uart_get_rs485_mode() in lieu of a struct device and
struct serial_rs485, both of which are directly accessible from struct
uart_port.
A few drivers call uart_get_rs485_mode() before setting the struct
device pointer in struct uart_port. Shuffle those calls around where
necessary.
[Heiko Stuebner did the ar933x_uart.c portion, hence his Signed-off-by.]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/271e814af4b0db3bffbbb74abf2b46b75add4516.1589285873.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor uart_unlock_and_check_sysrq() to:
- explicitly show that we release a port lock which makes
static analyzers happy:
CHECK drivers/tty/serial/serial_core.c
.../serial_core.c:3290:17: warning: context imbalance in 'uart_unlock_and_check_sysrq' - unexpected unlock
- use flags instead of irqflags to avoid confusion with IRQ flags
- provide one return point
- be more compact
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20200310174337.74109-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many embedded boards have a disconnected TTL level serial which can
generate some garbage that can lead to spurious false sysrq detects.
Currently, sysrq can be either completely disabled for serial console
or always disabled (with CONFIG_MAGIC_SYSRQ_SERIAL), since
commit 732dbf3a61 ("serial: do not accept sysrq characters via serial port")
At Arista, we have such boards that can generate BREAK and random
garbage. While disabling sysrq for serial console would solve
the problem with spurious false sysrq triggers, it's also desirable
to have a way to enable sysrq back.
As a measure of balance between on and off options, add
MAGIC_SYSRQ_SERIAL_SEQUENCE which is a string sequence that can enable
sysrq if it follows BREAK on a serial line. The longer the string - the
less likely it may be in the garbage.
Having the way to enable sysrq was beneficial to debug lockups with
a manual investigation in field and on the other side preventing false
sysrq detections.
Based-on-patch-by: Vasiliy Khoruzhick <vasilykh@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20200302175135.269397-3-dima@arista.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It should remove the align-padding before @name.
[yes, there's a "hole" in the structure now, but that's fine, no one
cares. If they do care, the whole thing should be restructured using
pahole to find a better ordering. Removing this field is good as some
drivers have been known to abuse it for other things when they shouldn't
have been doing that. -- gregkh]
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20200114171912.261787-4-dima@arista.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SUPPORT_SYSRQ is messy: every .c source should define it before
including "serial_core.h" if sysrq is supported or struct uart_port will
differ in sizes. Also this prevents moving to serial_core.c functions:
uart_handle_sysrq_char(), uart_prepare_sysrq_char(),
uart_unlock_and_check_sysrq().
It doesn't save many bytes in the structure, and a better way to reduce
it's size would be making rs485 and iso7816 pointers.
Introduce `has_sysrq` member to be used by serial line drivers further.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20191213000657.931618-4-dima@arista.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At the current place members those follow are:
: upf_t flags;
: upstat_t status;
: int hw_stopped;
: unsigned int mctrl;
: unsigned int timeout;
: unsigned int type;
: const struct uart_ops *ops;
Together, they give (*ops) 8-byte align on 64-bit platforms.
And `sysrq_ch` introduces 4-byte padding.
On the other side, above:
: struct device *dev;
: unsigned char hub6;
: unsigned char suspended;
: unsigned char unused[2];
: const char *name;
Adds another 4-byte padding.
Moving sysrq members just before `hub6` allows to save 8 bytes
per-uart_port on 64-bit platforms:
On my gcc, x86_64 sizeof(struct uart_port) goes from 528 to 520.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20191213000657.931618-3-dima@arista.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The converted files are focused at the Kernel internal API,
so, this is a good candidate for the kernel API set of books.
The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the static inline function uart_handle_break() in serial_core.h we
dereference port->cons. That gives an error unless console.h is also
included.
This error hasn't shown up till now because everyone who has defined
SUPPORT_SYSRQ has also included console.h, but it's a bit ugly to make
this requirement. Let's make the include explicit.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Right now serial drivers process sysrq keys deep in their character
receiving code. This means that they've already grabbed their
port->lock spinlock. This can end up getting in the way if we've go
to do serial stuff (especially kgdb) in response to the sysrq.
Serial drivers have various hacks in them to handle this. Looking at
'8250_port.c' you can see that the console_write() skips locking if
we're in the sysrq handler. Looking at 'msm_serial.c' you can see
that the port lock is dropped around uart_handle_sysrq_char().
It turns out that these hacks aren't exactly perfect. If you have
lockdep turned on and use something like the 8250_port hack you'll get
a splat that looks like:
WARNING: possible circular locking dependency detected
[...] is trying to acquire lock:
... (console_owner){-.-.}, at: console_unlock+0x2e0/0x5e4
but task is already holding lock:
... (&port_lock_key){-.-.}, at: serial8250_handle_irq+0x30/0xe4
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&port_lock_key){-.-.}:
_raw_spin_lock_irqsave+0x58/0x70
serial8250_console_write+0xa8/0x250
univ8250_console_write+0x40/0x4c
console_unlock+0x528/0x5e4
register_console+0x2c4/0x3b0
uart_add_one_port+0x350/0x478
serial8250_register_8250_port+0x350/0x3a8
dw8250_probe+0x67c/0x754
platform_drv_probe+0x58/0xa4
really_probe+0x150/0x294
driver_probe_device+0xac/0xe8
__driver_attach+0x98/0xd0
bus_for_each_dev+0x84/0xc8
driver_attach+0x2c/0x34
bus_add_driver+0xf0/0x1ec
driver_register+0xb4/0x100
__platform_driver_register+0x60/0x6c
dw8250_platform_driver_init+0x20/0x28
...
-> #0 (console_owner){-.-.}:
lock_acquire+0x1e8/0x214
console_unlock+0x35c/0x5e4
vprintk_emit+0x230/0x274
vprintk_default+0x7c/0x84
vprintk_func+0x190/0x1bc
printk+0x80/0xa0
__handle_sysrq+0x104/0x21c
handle_sysrq+0x30/0x3c
serial8250_read_char+0x15c/0x18c
serial8250_rx_chars+0x34/0x74
serial8250_handle_irq+0x9c/0xe4
dw8250_handle_irq+0x98/0xcc
serial8250_interrupt+0x50/0xe8
...
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&port_lock_key);
lock(console_owner);
lock(&port_lock_key);
lock(console_owner);
*** DEADLOCK ***
The hack used in 'msm_serial.c' doesn't cause the above splats but it
seems a bit ugly to unlock / lock our spinlock deep in our irq
handler.
It seems like we could defer processing the sysrq until the end of the
interrupt handler right after we've unlocked the port. With this
scheme if a whole batch of sysrq characters comes in one irq then we
won't handle them all, but that seems like it should be a fine
compromise.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit c550f01c81.
Turns out the samsung tty driver is mucking around in the "unused" port
fields and this patch breaks that code :(
So we need to fix that driver up before this can be accepted.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the ISO7816 ioctl and associated accessors and data structure.
Drivers can then use this common implementation to handle ISO7816
(smart cards).
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[ludovic.desroches@microchip.com: squash and rebase, removal of gpios, checkpatch fixes]
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a "pps_4wire" file to serial ports in sysfs in case the kernel is
configured with CONFIG_PPS_CLIENT_LDISC. Writing 1 to the file enables
the use of CTS instead of DCD for PPS signal input. This is necessary
in case a serial port is not completely wired.
Though this affects PPS processing the patch is against the serial core
as the source of the serial port PPS event dispatching has to be
modified. Furthermore it should be possible to modify the source of
serial port PPS event dispatching before changing the line discipline.
Signed-off-by: Andreas Steinmetz <ast@domdv.de>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Tested-by: Steve Sakoman <steve@sakoman.com>
Tested-by: Eric Gallimore <egallimore@ucsd.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As part of bringup I ended up wanting to call an earlycon driver by a
name that was exactly 16-bytes big, specifically "qcom_geni_serial".
Unfortunately, when I tried this I found that things compiled just
fine. They just didn't work.
Specifically the compiler felt perfectly justified in initting the
".name" field of "struct earlycon_id" with the full 16-bytes and just
skipping the '\0'. Needless to say, that behavior didn't seem ideal,
but I guess someone must have allowed it for a reason.
One way to fix this is to shorten the name field to 15 bytes and then
add an extra byte after that nobody touches. This should always be
initted to 0 and we're golden.
There are, of course, other ways to fix this too. We could audit all
the users of the "name" field and make them stop at both null
termination or at 16 bytes. We could also just make the name field
much bigger so that we're not likely to run into this. ...but both
seem like we'll just hit the bug again.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change adds a flag to indicate that a UART is has an external means
of synchronising its FIFO, without needing CTSRTS or XON/XOFF.
This allows us to use the throttle/unthrottle callbacks, without having
to claim other methods of flow control.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Tested-by: Eddie James <eajames@linux.vnet.ibm.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 99492c39f3 ("earlycon: Fix __earlycon_table stride") tried to fix
__earlycon_table stride by forcing the earlycon_id struct alignment to 32
and asking the linker to 32-byte align the __earlycon_table symbol. This
fix was based on commit 07fca0e57f ("tracing: Properly align linker
defined symbols") which tried a similar fix for the tracing subsystem.
However, this fix doesn't quite work because there is no guarantee that
gcc will place structures packed into an array format. In fact, gcc 4.9
chooses to 64-byte align these structs by inserting additional padding
between the entries because it has no clue that they are supposed to be in
an array. If we are unlucky, the linker will assign symbol
"__earlycon_table" to a 32-byte aligned address which does not correspond
to the 64-byte aligned contents of section "__earlycon_table".
To address this same problem, the fix to the tracing system was
subsequently re-implemented using a more robust table of pointers approach
by commits:
3d56e331b6 ("tracing: Replace syscall_meta_data struct array with pointer array")
6549864629 ("tracepoints: Fix section alignment using pointer array")
e4a9ea5ee7 ("tracing: Replace trace_event struct array with pointer array")
Let's use this same "array of pointers to structs" approach for
EARLYCON_TABLE.
Fixes: 99492c39f3 ("earlycon: Fix __earlycon_table stride")
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Suggested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Re-use the object-like macro EARLYCON_USED_OR_UNUSED to mark
`earlycon_acpi_spcr_enable` as maybe_unused.
Fix the following warning (treated as error in W=1)
CC arch/powerpc/kernel/setup-common.o
In file included from ./include/linux/serial_8250.h:14:0,
from arch/powerpc/kernel/setup-common.c:33:
./include/linux/serial_core.h:382:19: error: ‘earlycon_acpi_spcr_enable’ defined but not used [-Werror=unused-const-variable=]
static const bool earlycon_acpi_spcr_enable;
^~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull more ACPI updates from Rafael Wysocki:
"These are mostly fixes and cleanups, a few new quirks, a couple of
updates related to the handling of ACPI tables and ACPICA copyrights
refreshment.
Specifics:
- Update the ACPICA kernel code to upstream revision 20180105
including:
* Assorted fixes (Jung-uk Kim)
* Support for X32 ABI compilation (Anuj Mittal)
* Update of ACPICA copyrights to 2018 (Bob Moore)
- Prepare for future modifications to avoid executing the _STA
control method too early (Hans de Goede)
- Make the processor performance control library code ignore _PPC
notifications if they cannot be handled and fix up the C1 idle
state definition when it is used as a fallback state (Chen Yu,
Yazen Ghannam)
- Make it possible to use the SPCR table on x86 and to replace the
original IORT table with a new one from initrd (Prarit Bhargava,
Shunyong Yang)
- Add battery-related quirks for Asus UX360UA and UX410UAK and add
quirks for table parsing on Dell XPS 9570 and Precision M5530 (Kai
Heng Feng)
- Address static checker warnings in the CPPC code (Gustavo Silva)
- Avoid printing a raw pointer to the kernel log in the smart battery
driver (Greg Kroah-Hartman)"
* tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: sbshc: remove raw pointer from printk() message
ACPI: SPCR: Make SPCR available to x86
ACPI / CPPC: Use 64-bit arithmetic instead of 32-bit
ACPI / tables: Add IORT to injectable table list
ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530
ACPICA: Update version to 20180105
ACPICA: All acpica: Update copyrights to 2018
ACPI / processor: Set default C1 idle state description
ACPI / battery: Add quirk for Asus UX360UA and UX410UAK
ACPI: processor_perflib: Do not send _PPC change notification if not ready
ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs
ACPI / bus: Do not call _STA on battery devices with unmet dependencies
PCI: acpiphp_ibm: prepare for acpi_get_object_info() no longer returning status
ACPI: export acpi_bus_get_status_handle()
ACPICA: Add a missing pair of parentheses
ACPICA: Prefer ACPI_TO_POINTER() over ACPI_ADD_PTR()
ACPICA: Avoid NULL pointer arithmetic
ACPICA: Linux: add support for X32 ABI compilation
ACPI / video: Use true for boolean value
SPCR is currently only enabled or ARM64 and x86 can use SPCR to setup
an early console.
General fixes include updating Documentation & Kconfig (for x86),
updating comments, and changing parse_spcr() to acpi_parse_spcr(),
and earlycon_init_is_deferred to earlycon_acpi_spcr_enable to be
more descriptive.
On x86, many systems have a valid SPCR table but the table version is
not 2 so the table version check must be a warning.
On ARM64 when the kernel parameter earlycon is used both the early console
and console are enabled. On x86, only the earlycon should be enabled by
by default. Modify acpi_parse_spcr() to allow options for initializing
the early console and console separately.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mark Salter <msalter@redhat.com>
Tested-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The pointed string is never modified from within uart_parse_options, so
it should be marked as const in the function prototype.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit ef838a81dd ("serial: Add common rs485 device tree parsing
function") consolidated retrieval of rs485 OF properties in a common
helper function but did not #ifdef it to CONFIG_OF. The function is
therefore included on ACPI platforms as well even though it's not used.
On the other hand ACPI platforms with rs485 do exist (e.g. Siemens
IOT2040) and they may leverage _DSD to store rs485 properties. Likewise,
UART platform devices instantiated from an MFD should be able to specify
rs485 properties. In fact, the tty subsystem maintainer had asked for
a "generic" function during review of commit ef838a81dd:
https://marc.info/?l=linux-serial&m=150143441725194&w=4
Thus, instead of constraining the helper to OF platforms, make it
platform-agnostic by converting it to device_property_*() functions
and renaming it accordingly.
In imx.c, move the invocation of uart_get_rs485_mode() from
serial_imx_probe_dt() to serial_imx_probe() so that it also gets called
for non-OF devices.
In omap-serial.c, move its invocation further up within
serial_omap_probe_rs485() so that the RTS polarity can be overridden
with the driver-specific "rs485-rts-active-high" property once we
introduce a generic "rs485-rts-active-low" property.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Richard Genoud <richard.genoud@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several drivers have the same device tree parsing code. Create
a common helper function for it.
This patch bases on work done by Sascha Hauer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to duplicate a flag which IRQ core takes care of.
Replace custom flag by IRQ core API that retrieves its state.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
First 16 bits in the flags field are user-visible except
UPF_NO_TXEN_TEST. To keep it clean we introduce internal quirks and move
UPF_NO_TXEN_TEST to them. Rename the constant to UPQ_NO_TXEN_TEST to
distinguish with port flags. Users are converted accordingly.
The quirks field might be extended later to hold the additional ones.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The probing of THRE irq behaviour assumes the other end will be reading
bytes out of the buffer in order to probe the port at driver init. In
some cases the other end cannot be relied upon to read these bytes, so
provide a flag for them to skip this step.
Bit 19 was chosen as the flags are a int and the top bits are taken.
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
