[ Upstream commit 3de88b95c4d436d78afc0266a0bed76c35ddeb62 ]
The estimated time was supposing the rate was expressed in mibit
(bit * 1024^2) but it is in mbit (bit * 1000^2).
This makes the threshold higher but in a more realistic way to avoid
false positives reported by CI instances.
Before this patch, the thresholds were at 7561/4005ms and now they are
at 7906/4178ms.
While at it, also fix a typo in the linked comment, spotted by Mat.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/310
Fixes: 1a418cb8e8 ("mptcp: simult flow self-tests")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6ab64b074f29b42ff272793806efc913f7cc742 ]
Currently the simult_flows.sh self-tests are not very stable,
especially when running on slow VMs.
The tests measure runtime for transfers on multiple subflows
and check that the time is near the theoretical maximum.
The current test infra introduces a bit of jitter in test
runtime, due to multiple explicit delays. Additionally the
runtime is measured by the shell script wrapper. On a slow
VM, the script overhead is measurable and subject to relevant
jitter.
One solution to make the test more stable would be adding more
slack to the expected time; that could possibly hide real
regressions. Instead move the measurement inside the command
doing the transfer, and drop most unneeded sleeps.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 3de88b95c4d4 ("selftests: mptcp: fix mibit vs mbit mix up")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 42fb6cddec3b306c9f6ef136b6438e0de1836431 upstream.
The mentioned test-case still use an hard-coded-len sleep to
wait for a relative large number of connection to be established.
On very slow VM and with debug build such timeout could be exceeded,
causing failures in our CI.
Address the issue polling for the expected condition several times,
up to an unreasonable high amount of time. On reasonably fast system
the self-tests will be faster then before, on very slow one we will
still catch the correct condition.
Fixes: df62f2ec3d ("selftests/mptcp: add diag interface tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 24720d7452df2dff2e539d9dff28904e25bb1c6d ]
This patch added the data checksum error mib counters check for the
script mptcp_connect.sh when the data checksum is enabled.
In do_transfer(), got the mib counters twice, before and after running
the mptcp_connect commands. The latter minus the former is the actual
number of the data checksum mib counter.
The output looks like this:
ns1 MPTCP -> ns2 (dead:beef:1::2:10007) MPTCP (duration 86ms) [ OK ]
ns1 MPTCP -> ns2 (10.0.2.1:10008 ) MPTCP (duration 66ms) [ FAIL ]
server got 1 data checksum error[s]
Fixes: 94d66ba1d8 ("selftests: mptcp: enable checksum in mptcp_connect.sh")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/255
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e35f885b357d47e04380a2056d1b2cc3e6f4f24b upstream.
Since commit 2843ff6f36 ("mptcp: remote addresses fullmesh"), an
MPTCP client can attempt creating multiple MPJ subflow simultaneusly.
In such scenario the server, when syncookies are enabled, could end-up
accepting incoming MPJ syn even above the configured subflow limit, as
the such limit can be enforced in a reliable way only after the subflow
creation. In case of syncookie, only after the 3rd ack reception.
As a consequence the related self-tests case sporadically fails, as it
verify that the server always accept the expected number of MPJ syn.
Address the issues relaxing the MPJ syn number constrain. Note that the
check on the accepted number of MPJ 3rd ack still remains intact.
Fixes: 2843ff6f36 ("mptcp: remote addresses fullmesh")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0cd33c5ffec12bd77a1c02db2469fac08f840939 upstream.
Instead of waiting for an arbitrary amount of time for the MPTCP
MP_CAPABLE handshake to complete, explicitly wait for the relevant
socket to enter into the established status.
Additionally let the data transfer application use the slowest
transfer mode available (-r), to cope with very slow host, or
high jitter caused by hosting VMs.
Fixes: df62f2ec3d ("selftests/mptcp: add diag interface tests")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/258
Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9846921dba4936d92f7608315b5d1e0a8ec3a538 upstream.
MPJ ipv6 selftests currently lack per link route to the server
net. Additionally, ipv6 subflows endpoints are created without any
interface specified. The end-result is that in ipv6 self-tests
subflows are created all on the same link, leading to expected delays
and sporadic self-tests failures.
Fix the issue by adding the missing setup bits.
Fixes: 523514ed0a ("selftests: mptcp: add ADD_ADDR IPv6 test cases")
Reported-and-tested-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7c909a98042ce403c8497c5d6ff94dd53bdd2131 ]
In listener_ns, we should pass srv_proto argument to mptcp_connect command,
not cl_proto.
Fixes: 7d1e6f1639 ("selftests: mptcp: add testcase for active-back")
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
'$cin' and '$sin' variables are local to a function: they are then not
available from the cleanup trap.
Instead, we need to use '$large' and '$small' that are not local and
defined just before setting the trap.
Without this patch, running this script in a loop might cause a:
write: No space left on device
issue.
Fixes: 1a418cb8e8 ("mptcp: simult flow self-tests")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch dealt with the MPTCP_PM_ADDR_FLAG_FULLMESH flag in add_addr()
and print_addr(), to set and print out the fullmesh flag.
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add more test-case for link failures scenario,
including recovery from link failure using only
backup subflows and bi-directional transfer.
Additionally explicitly check for stale count
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After patch "mptcp: fix syncookie process if mptcp can not_accept new
subflow", if subflow is limited, MP_JOIN SYN is dropped, and no SYN/ACK
will be replied.
So in case "multiple subflows limited by server", the expected SYN/ACK
number should be 1.
Fixes: 00587187ad ("selftests: mptcp: add test cases for mptcp join tests with syn cookies")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without this modification, we were often displaying this error messages:
FAIL: Could not even run loopback test
But $ret could have been set to a non 0 value in many different cases:
- net.mptcp.enabled=0 is not working as expected
- setsockopt(..., TCP_ULP, "mptcp", ...) is allowed
- ping between each netns are failing
- tests between ns1 as a receiver and ns>1 are failing
- other tests not involving ns1 as a receiver are failing
So not only for the loopback test.
Now a clearer message, including the time it took to run all tests, is
displayed.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh
scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added a new argument "-C" for the mptcp_join.sh script to set
the sysctl checksum_enabled to 1 in ns1 and ns2 to enable the data
checksum.
In chk_join_nr, check the counter of the mib for the data checksum.
Also added a new argument "-S" for the mptcp_join.sh script to start the
test cases that verify the checksum handshake:
* Sender and listener both have checksums off
* Sender and listener both have checksums on
* Sender checksums off, listener checksums on
* Sender checksums on, listener checksums off
The output looks like this:
01 checksum test 0 0 sum[ ok ] - csum [ ok ]
02 checksum test 1 1 sum[ ok ] - csum [ ok ]
03 checksum test 0 1 sum[ ok ] - csum [ ok ]
04 checksum test 1 0 sum[ ok ] - csum [ ok ]
05 no JOIN syn[ ok ] - synack[ ok ] - ack[ ok ]
sum[ ok ] - csum [ ok ]
06 single subflow, limited by client syn[ ok ] - synack[ ok ] - ack[ ok ]
sum[ ok ] - csum [ ok ]
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new argument "-C" for the mptcp_connect.sh script to
set the sysctl checksum_enabled to 1 in ns1, ns2, ns3 and ns4 to enable
the data checksum.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This extends the existing setsockopt test case to also check for cmsg
timestamps.
mptcp_connect will abort/fail if the setockopt was passed but the
timestamp cmsg isn't present after successful recvmsg().
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous commit noted that we can have fallback
scenario due to OoO (or packet drop). Update the self-tests
accordingly
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
LANG gives a weak default to each LC_* in case it is not explicitly
defined. LC_ALL, if set, overrides all other LC_* variables.
LANG < LC_CTYPE, LC_COLLATE, LC_MONETARY, LC_NUMERIC, ... < LC_ALL
This is why documentation such as [1] suggests to set LC_ALL in build
scripts to get the deterministic result.
LANG=C is not strong enough to override LC_* that may be set by end
users.
[1]: https://reproducible-builds.org/docs/locales/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Matthias Maennich <maennich@google.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> (mptcp)
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extend mptcp_connect tool with SO_MARK support (-M <value>) and
add a test case that checks that the packet mark gets copied to all
subflows.
This is done by only allowing packets with either skb->mark 1 or 2
via iptables.
DROP rule packet counter is checked; if its not zero, print an error
message and fail the test case.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new testcase for setting the net device name. In it,
pass the net device name to pm_nl_ctl to set the ifindex field of struct
mptcp_pm_addr_entry.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Very occasionally, MPTCP selftests fail. Yeah, I saw that at least once!
Here we provide more details in case of errors with mptcp_join.sh script
like it was done with mptcp_connect.sh, see
commit 767389c8dd ("selftests: mptcp: dump more info on errors")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
'mptcp_connect' already has a timeout for poll() but in some cases, it
is not enough.
With "timeout" tool, we will force the command to fail if it doesn't
finish on time. Thanks to that, the script will continue and display
details about the current state before marking the test as failed.
Displaying this state is very important to be able to understand the
issue. Best to have our CI reporting the issue than just "the test
hanged".
Note that in mptcp_connect.sh, we were using a long timeout to validate
the fact we cannot create a socket if a sysctl is set. We don't need
this timeout.
In diag.sh, we want to send signals to mptcp_connect instances that have
been started in the netns. But we cannot send this signal to 'timeout'
otherwise that will stop the timeout and messages telling us SIGUSR1 has
been received will be printed. Instead of trying to find the right PID
and storing them in an array, we can simply use the output of
'ip netns pids' which is all the PIDs we want to send signal to.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/160
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added the testcases for removing the id 0 subflow and the id 0
address.
In do_transfer, use the removing addresses number '9' for deleting the id
0 address.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the id 0 address, different MPTCP connections could be using
different IP addresses for id 0.
This patch added an extra argument IP address for del_addr when
using id 0.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IDs are supposed to be between 0 and 255.
In pm_nl_ctl, for both the 'add' and 'get' instruction, the ID is casted
in a u_int8_t. So if we give 256, we will delete ID 0. Obviously, the
goal is not to delete this ID by giving 256.
We could modify pm_nl_ctl and stop if the ID is negative or higher than
255 but probably better not to increase the number of lines for such
things in this tool which is only used in selftests. Instead, we use it
within the limits.
This modification also means that we will no longer add a new ID for the
2nd entry. That's why we removed an expected entry from the dump and
introduced with
commit dc8eb10e95 ("selftests: mptcp: add testcases for setting the address ID").
So now we delete ID 9 like before and we add entries for IDs 10 to 255
that are deleted just after.
Note that this could be seen as a fix but it was not really an issue so
far: we were simply playing with ID 0/1 once again. With the following
commit ("selftests: mptcp: add addr argument for del_addr"), it will be
different because ID 0 is going to required an address. We don't want
errors when trying to delete ID 0 without the address argument.
Acked-and-tested-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added the timeout testcases for multi addresses, valid and
invalid.
These testcases need to transmit 8 ADD_ADDRs, so add a new speed level
'least' to set 10 to mptcp_connect to slow down the transmitting process.
The original speed level 'slow' still uses 50.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some testcases, we need to slow down the transmitting process. This
patch added a new argument named cfg_do_w for cfg_remove to allow the
caller to pass an argument to cfg_remove.
In do_rnd_write, use this cfg_do_w to control the transmitting speed.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The join self tests previously used the '-c' command line option to
enable creation of pcap files for the tests that run, but the change to
allow running a subset of the join tests made overlapping use of that
option.
Restore the capture functionality with '-c' and move the syncookie test
option to '-k'.
Fixes: 1002b89f23 ("selftests: mptcp: add command line arguments for mptcp_join.sh")
Acked-and-tested-by: Geliang Tang <geliangtang@gmail.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The removing testcases can only delete the addresses from id 1, this
patch added the support for deleting the addresses from any id that user
set.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some of the removing testcases used two zeros as arguments for chk_rm_nr
like this: chk_rm_nr 0 0. This doesn't mean that no RM_ADDR has been sent.
It only means that RM_ADDR had been sent in the opposite direction that
chk_rm_nr is checking.
This patch added a new argument invert for chk_rm_nr to allow it can
check the RM_ADDR from the opposite direction.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Info from received MPCapable SYN were printed instead of the ones from
received MPCapable 3rd ACK.
Fixes: fed61c4b58 ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even if that may sound completely unlikely, the mptcp implementation
is not perfect, yet.
When the self-tests report an error we usually need more information
of what the scripts currently report. iproute allow provides
some additional goodies since a few releases, let's dump them.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the mptcp_join script is becoming too big, this patch splits it
into several smaller chunks, each of them has been defined in a function
as a individual test group for several related testcases.
Using bash getopts function to parse command line arguments, and invoke
each function to do the individual test group.
Here are all the arguments:
-f subflows_tests
-s signal_address_tests
-l link_failure_tests
-t add_addr_timeout_tests
-r remove_tests
-a add_tests
-6 ipv6_tests
-4 v4mapped_tests
-b backup_tests
-p add_addr_ports_tests
-c syncookies_tests
-h help
Run mptcp_join.sh with no argument will execute all testcases.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds testcases for ADD_ADDR with port and the related MIB
counters check in chk_add_nr. The output looks like this:
24 signal address with port syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ] - pt [ ok ]
syn[ ok ] - synack[ ok ] - ack[ ok ]
syn[ ok ] - ack [ ok ]
25 subflow and signal with port syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ] - pt [ ok ]
syn[ ok ] - synack[ ok ] - ack[ ok ]
syn[ ok ] - ack [ ok ]
26 remove single address with port syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ] - pt [ ok ]
syn[ ok ] - synack[ ok ] - ack[ ok ]
syn[ ok ] - ack [ ok ]
rm [ ok ] - sf [ ok ]
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
