Somehow it depends on multiple versions of the same AIDL interface.
Disable ELF checks and remove the older dependency for now.
Change-Id: Id57ab481b248d4c394597cbb8b15d5b839b0f911
Android 15.0.0 Release 20 (BP1A.250305.019)
# -----BEGIN PGP SIGNATURE-----
#
# iF0EABECAB0WIQRDQNE1cO+UXoOBCWTorT+BmrEOeAUCZ8eo7wAKCRDorT+BmrEO
# eN4YAJ9AUGcc2hDl+YufoLF5gYdwazAx1QCfbBMyXJ9iYYuAshuSUKkmG6GWUGw=
# =3s8S
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed Mar 5 03:29:19 2025 EET
# gpg: using DSA key 4340D13570EF945E83810964E8AD3F819AB10E78
# gpg: Good signature from "The Android Open Source Project <initial-contribution@android.com>" [ultimate]
# By Eileen Lai (2) and others
# Via Android Build Coastguard Worker (13) and others
* tag 'android-15.0.0_r20':
modem_svc: use modem_svc_sit version sepolicy
Disable Wifi BugReport for subsystem restart
Update ISODEP routing setting
[lynx] Define CAMERA_MULTICAM_BOOST
modem_svc: use shared_modem_platform to replace all modem_svc_sit
lynx: Pull init.insmod.*.cfg from vendor_dlkm
Move modem_svc_sit from gs201 to lynx
Remove vibrator HAL service
dumpstate: touch: Init using touch_predump
gps: set default SUPL SSL method to SSLv23
Change-Id: Ia80b4efb74ba65444f99827fa79b4559dc7c8991
Android 15.0.0 Release 6 (AP4A.241205.013)
# -----BEGIN PGP SIGNATURE-----
#
# iF0EABECAB0WIQRDQNE1cO+UXoOBCWTorT+BmrEOeAUCZ1IssQAKCRDorT+BmrEO
# ePuOAJ4uV4LeDXC0ruknaAcKgWbW+8gvSwCgkAIPnkb+WJx+Lfv+FFT0HJzmWnw=
# =ZyaA
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri Dec 6 00:44:01 2024 EET
# gpg: using DSA key 4340D13570EF945E83810964E8AD3F819AB10E78
# gpg: Good signature from "The Android Open Source Project <initial-contribution@android.com>" [marginal]
# gpg: initial-contribution@android.com: Verified 2483 signatures in the past
# 3 years. Encrypted 4 messages in the past 2 years.
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 4340 D135 70EF 945E 8381 0964 E8AD 3F81 9AB1 0E78
# By Wilson Sung (3) and others
# Via Android Build Coastguard Worker (8) and others
* tag 'android-15.0.0_r6':
sepolicy: Allow vendor_init to set vendor_bluetooth_prop
Add sepolicy for property persist.vendor.service.bdroid.
Update SELinux error
Update SELinux error
Add sepolicy for property persist.vendor.service.bdroid.
Update SELinux error
Change-Id: Ie4e2ed46b866f9775a7eea02db562fa3ff94569e
Android 15.0.0 Release 6 (AP4A.241205.013)
# -----BEGIN PGP SIGNATURE-----
#
# iF0EABECAB0WIQRDQNE1cO+UXoOBCWTorT+BmrEOeAUCZ1IssQAKCRDorT+BmrEO
# eP8+AJ4nsmxLYOmgrW3bZcjYxgNveSoW5gCbBAAVXf/tI5wFYAUBQKFs2HdD/cU=
# =qKeT
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri Dec 6 00:44:01 2024 EET
# gpg: using DSA key 4340D13570EF945E83810964E8AD3F819AB10E78
# gpg: Good signature from "The Android Open Source Project <initial-contribution@android.com>" [marginal]
# gpg: initial-contribution@android.com: Verified 2483 signatures in the past
# 3 years. Encrypted 4 messages in the past 2 years.
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 4340 D135 70EF 945E 8381 0964 E8AD 3F81 9AB1 0E78
# By Ankur Bakshi (3) and others
# Via Android Build Coastguard Worker (29) and others
* tag 'android-15.0.0_r6': (28 commits)
gps: set default SUPL SSL method to SSLv23
gps: Enable Beidou measurements only in the US for L10.
Symlink current prebuilt folder to android root
Update product id for lynx
lynx: add etm modules in userdebug/eng builds
Delete mapper4 manifest
gps: Re-enable GLO & QZSS in US
gps: add CpEarlyFixGuardTimeSec to prevent earlyfix response delay
thermal: read thermistor temp from sysfs
thermal:remove unused state2power value
Update lynx SVN to 46
thermal: Remove bcl related tzones
update OWNERS to include Android.bp
lynx: Add build_flags based properties for SMR/EMR build
haptics: Update output distortion gain
Adpf:lynx: switch to multitier heuristic boost.
Update lynx SVN to 45
Update antenna position coordinates
audio: Phase in L10 fortemedia tuning tables
lynx: Use build_flags for SVN
...
Conflicts:
device-lynx.mk
lynx/BoardConfig.mk
Change-Id: I50549219de5d81d0ada093bebdf0a9238d51840a
For solving sepolicy conflicts for different AP version, modem_svc_sit will support devices from gs101 to zuma_pro.
Bug: 372400955
Change-Id: I9e371028b1848b4ddbefa924f91dc84949817df1
Flag: NONE local testing only
Flag: EXEMPT gated by overlay
Bug: 373594936
Test: Manuel test, trigger SSR and won't create bugreport automatically
Change-Id: I35b73b9287463456d6a3376afb76fd2c3ce3115f
These overlays seem to be left over from barbet. With these values
adjusted, the padding on left and right sides of the status bar is
more symmetrical and the landscape top padding is correct.
Co-authored-by: Michael Bestas <mkbestas@lineageos.org>
Change-Id: I10c3f495b7627200b05a24f5b259f789e62ada13
Makes touch work in recovery
goodix_brl_touch requires goog_touch_interface symbols too
Co-authored-by: Nicholas Lim <nicknitewolf@lineageos.org>
Co-authored-by: LuK1337 <priv.luk@gmail.com>
Change-Id: Iaa5a158af827732b13ab79b60bed2f319ce56391
https://github.com/kormax/osaifu-keitai-google-pixel/
Test 1 & 2 on a Global SKU Google Pixel 6a (bluejay):
- Observe that Osaifu-Keitai doesn't function WITHOUT this change.
- Observe that Osaifu-Keitai functions normally WITH this change.
Test 3 & 4 on a Japanese SKU Google Pixel Fold (felix):
- Observe that Osaifu-Keitai functions normally WITHOUT this change.
- Observe that Osaifu-Keitai continues to function normally WITH this change.
Change-Id: I9faac2e130714a41e6922b62d2019dae0d615a3b
Signed-off-by: AnierinB <anierin@evolution-x.org>
So that the mm conversion is less than 1.
Also update missing config auth_ripple_alpha_in_duration
which should have been migrated to be 0 since the device
supports UDFPS.
Test: manual
Bug: 237311757
Change-Id: Ia0ba3145250ea16e58803651d77471f9c701b444
Resolve issues with VoWiFi (Wi-Fi Calling) for Pixel 7 series, which
now uses a different proprietary package for its qualified networks
service.
Issue: calyxos#1324
Change-Id: Ie2984ff22cf786eb82a536bfb1d9ffaff15ae079
Trying to add more than 4 fingerprints per user causes the Udfps
overlay to not appear and shows the following message in logs:
`E Biometrics/EnrollClient: Reached enrollment limit`.
Change-Id: I26707d5b50b28d032b117e22ba703c5fc0dfe3a2
lynx has peak refresh rate higher than
60 Hz, so allow users to toggle high-refresh rate like on stock.
Change-Id: I7fcbb905b61575de8c5e9d9a935463932551fb6a
