rhode: Go Back super partition size to devices

Change-Id: I52b6a5e2bf986f42d240d47c2f3381fa1220c3a5
rhode: Build MotCamera4 from prebuilt source
2025-10-15 23:10:34 -03:00 · 2025-10-15 23:09:57 -03:00 · 2025-10-15 23:09:41 -03:00 · 2025-10-15 23:09:09 -03:00 · 2025-10-15 23:08:48 -03:00 · 2025-10-15 23:08:00 -03:00
31 changed files with 305 additions and 225 deletions
--- a/Android.bp
+++ b/Android.bp
@@ -1,5 +1,5 @@
 //
-// SPDX-FileCopyrightText: 2022-2024 The LineageOS Project
+// SPDX-FileCopyrightText: The LineageOS Project
 // SPDX-License-Identifier: Apache-2.0
 //

--- a/AndroidProducts.mk
+++ b/AndroidProducts.mk
@@ -1,5 +1,5 @@
 #
-# SPDX-FileCopyrightText: 2022 The LineageOS Project
+# SPDX-FileCopyrightText: The LineageOS Project
 # SPDX-License-Identifier: Apache-2.0
 #

--- a/BoardConfig.mk
+++ b/BoardConfig.mk
@@ -1,5 +1,5 @@
 #
-# SPDX-FileCopyrightText: 2022-2024 The LineageOS Project
+# SPDX-FileCopyrightText: The LineageOS Project
 # SPDX-License-Identifier: Apache-2.0
 #

@@ -26,6 +26,8 @@ BOARD_VENDOR_RAMDISK_KERNEL_MODULES_LOAD := $(strip $(shell cat $(DEVICE_PATH)/v
 BOOT_KERNEL_MODULES := $(BOARD_VENDOR_RAMDISK_KERNEL_MODULES_LOAD)

 # Partitions
+BOARD_SUPER_PARTITION_SIZE := 7583301632
+BOARD_MOTO_DYNAMIC_PARTITIONS_SIZE := 3787456512 # ( BOARD_SUPER_PARTITION_SIZE / 2 ) - 4MB 
 BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE := 100663296

 # Properties
--- a/README.md
+++ b/README.md
@@ -3,7 +3,7 @@ Device tree configuration for Motorola Moto G52

 ```

-SPDX-FileCopyrightText: 2022-2024 The LineageOS Project
+SPDX-FileCopyrightText: The LineageOS Project

 SPDX-License-Identifier: Apache-2.0

--- a/device.mk
+++ b/device.mk
@@ -1,5 +1,5 @@
 #
-# SPDX-FileCopyrightText: 2022-2024 The LineageOS Project
+# SPDX-FileCopyrightText: The LineageOS Project
 # SPDX-License-Identifier: Apache-2.0
 #

@@ -27,16 +27,26 @@ TARGET_SCREEN_WIDTH := 1080
 # Init
 PRODUCT_PACKAGES += \
    fstab.qcom \
-    init.oem.fingerprint2.sh \
-    init.mmi.overlay.rc
+    init.mmi.overlay.rc \
+    init.nfc.samsung.rc \
+    init.oem.fingerprint2.sh
+
+# Moto Camera 4
+TARGET_MOTCAMERA4 := rhode
+TARGET_USES_MOTCAMERA4 := true
+
+$(call inherit-product, vendor/motorola/MotCamera4-bengal/motcamera4.mk)

 # NFC
 PRODUCT_PACKAGES += \
-    android.hardware.nfc@1.2-service.samsung
+    android.hardware.nfc-service.samsung

 # Overlay
-DEVICE_PACKAGE_OVERLAYS += \
-    $(LOCAL_PATH)/overlay
+PRODUCT_PACKAGES += \
+    FrameworksResDevice \
+    SettingsResDevice \
+    SystemUIResDevice \
+    WifiResDevice

 # Permissions
 PRODUCT_COPY_FILES += \
--- a/evolution.dependencies
+++ b/evolution.dependencies
@@ -0,0 +1,13 @@
+[
+  {
+    "repository": "device_motorola_sm6225-common",
+    "target_path": "device/motorola/sm6225-common",
+    "remote": "evo-devices"
+  },
+  {
+    "repository": "Deivid-21s-Sources/proprietary_vendor_motorola_rhode",
+    "target_path": "vendor/motorola/rhode",
+    "remote": "github-non-los",
+    "branch": "lineage-22.2"
+  }
+]
--- a/extract-files.py
+++ b/extract-files.py
@@ -1,6 +1,6 @@
 #!/usr/bin/env -S PYTHONPATH=../../../tools/extract-utils python3
 #
-# SPDX-FileCopyrightText: 2024 The LineageOS Project
+# SPDX-FileCopyrightText: The LineageOS Project
 # SPDX-License-Identifier: Apache-2.0
 #

@@ -31,9 +31,6 @@ lib_fixups: lib_fixups_user_type = {
 }

 blob_fixups: blob_fixups_user_type = {
-    'vendor/etc/init/android.hardware.nfc@1.2-service.sec.rc': blob_fixup()
-        .regex_replace('sec', 'samsung')
-        .regex_replace('class hal', 'override\n    class hal'),
    (
        'vendor/lib64/camera/components/com.qti.node.gpu.so',
        'vendor/lib64/com.qti.feature2.gs.so',
@@ -42,6 +39,11 @@ blob_fixups: blob_fixups_user_type = {
        'vendor/lib64/hw/com.qti.chi.override.so',
    ): blob_fixup()
        .binary_regex_replace(b'camera.mot.is.coming.cts', b'vendor.camera.coming.cts'),
+    (
+        'vendor/lib64/camera/components/com.qti.node.dewarp.so',
+        'vendor/lib64/camera/components/com.vidhance.node.processing.so',
+    ): blob_fixup()
+        .replace_needed('libui.so', 'libui-v34.so'),
 }  # fmt: skip

 extract_fns: extract_fns_user_type = {
--- a/init/Android.bp
+++ b/init/Android.bp
@@ -1,5 +1,5 @@
 //
-// SPDX-FileCopyrightText: 2024 The LineageOS Project
+// SPDX-FileCopyrightText: The LineageOS Project
 // SPDX-License-Identifier: Apache-2.0
 //

@@ -16,6 +16,13 @@ prebuilt_etc {
    vendor: true,
 }

+prebuilt_etc {
+    name: "init.nfc.samsung.rc",
+    src: "init.nfc.samsung.rc",
+    sub_dir: "init",
+    vendor: true,
+}
+
 sh_binary {
    name: "init.oem.fingerprint2.sh",
    src: "init.oem.fingerprint2.sh",
--- a/init/fstab.qcom
+++ b/init/fstab.qcom
@@ -6,9 +6,13 @@
 # Currently we dont have e2fsck compiled. So fs check would failed.

 #<src>                                                 <mnt_point>               <type>  <mnt_flags and options>                            <fs_mgr_flags>
+system                                                  /system                  erofs   ro                                                   wait,slotselect,avb=vbmeta_system,avb_keys=/avb/q-gsi.avbpubkey:/avb/r-gsi.avbpubkey:/avb/s-gsi.avbpubkey,logical,first_stage_mount
 system                                                  /system                  ext4    ro                                                   wait,slotselect,avb=vbmeta_system,avb_keys=/avb/q-gsi.avbpubkey:/avb/r-gsi.avbpubkey:/avb/s-gsi.avbpubkey,logical,first_stage_mount
-system_ext                                              /system_ext              ext4    ro                                                   wait,slotselect,avb,logical,nofail,first_stage_mount
-product                                                 /product                 ext4    ro                                                   wait,slotselect,avb,logical,nofail,first_stage_mount
+system_ext                                              /system_ext              erofs   ro                                                   wait,slotselect,avb=vbmeta_system,logical,first_stage_mount
+system_ext                                              /system_ext              ext4    ro                                                   wait,slotselect,avb=vbmeta_system,logical,nofail,first_stage_mount
+product                                                 /product                 erofs   ro                                                   wait,slotselect,avb=vbmeta_system,logical,first_stage_mount
+product                                                 /product                 ext4    ro                                                   wait,slotselect,avb=vbmeta_system,logical,nofail,first_stage_mount
+vendor                                                  /vendor                  erofs   ro                                                   wait,slotselect,avb=vbmeta,logical,first_stage_mount
 vendor                                                  /vendor                  ext4    ro                                                   wait,slotselect,avb=vbmeta,logical,first_stage_mount
 /dev/block/by-name/metadata                             /metadata                ext4    noatime,nosuid,nodev,discard                         wait,formattable,first_stage_mount,check
 /dev/block/bootdevice/by-name/userdata                  /data                    f2fs    noatime,nosuid,nodev,discard,reserve_root=32768,resgid=1065,fsync_mode=nobarrier,inlinecrypt            latemount,wait,check,formattable,fileencryption=aes-256-xts:aes-256-cts:v2+inlinecrypt_optimized+wrappedkey_v0,metadata_encryption=aes-256-xts:wrappedkey_v0,keydirectory=/metadata/vold/metadata_encryption,quota,reservedsize=128M,sysfs_path=/sys/devices/platform/soc/4804000.ufshc,checkpoint=fs
--- a/init/init.nfc.samsung.rc
+++ b/init/init.nfc.samsung.rc
@@ -0,0 +1,9 @@
+on boot && property:ro.vendor.hw.nfc=samsung
+    start vendor.samsung_nfc_hal_service
+
+service vendor.samsung_nfc_hal_service /vendor/bin/hw/android.hardware.nfc-service.samsung
+    override
+    class hal
+    user nfc
+    group nfc
+    disabled
--- a/lineage.dependencies
+++ b/lineage.dependencies
@@ -1,6 +0,0 @@
-[
-  {
-    "repository": "android_device_motorola_sm6225-common",
-    "target_path": "device/motorola/sm6225-common"
-  }
-]
--- a/lineage_rhode.mk
+++ b/lineage_rhode.mk
@@ -1,5 +1,5 @@
 #
-# SPDX-FileCopyrightText: 2022-2024 The LineageOS Project
+# SPDX-FileCopyrightText: The LineageOS Project
 # SPDX-License-Identifier: Apache-2.0
 #

--- a/overlay/frameworks/base/packages/SystemUI/res/values/config.xml
+++ b/overlay/frameworks/base/packages/SystemUI/res/values/config.xml
@@ -1,50 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-/**
- * Copyright (c) 2009, The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-->
-
-<!-- These resources are around just to allow their values to be customized
-     for different hardware and product builds.  Do not translate. -->
-
-<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
-
-    <!-- Doze: does this device support STATE_DOZE?  -->
-    <bool name="doze_display_state_supported">true</bool>
-
-    <!-- A path similar to frameworks/base/core/res/res/values/config.xml
-      config_mainBuiltInDisplayCutout that describes a path larger than the exact path of a display
-      cutout. If present as well as config_enableDisplayCutoutProtection is set to true, then
-      SystemUI will draw this "protection path" instead of the display cutout path that is normally
-      used for anti-aliasing.
-
-      This path will only be drawn when the front-facing camera turns on, otherwise the main
-      DisplayCutout path will be rendered
-       -->
-    <string translatable="false" name="config_frontBuiltInDisplayCutoutProtection">
-        M 503,63
-        a 37,37 0 1 0 74,0
-        a 37,37 0 1 0 -74,0
-        Z
-    </string>
-
-    <!--  ID for the camera that needs extra protection -->
-    <string translatable="false" name="config_protectedCameraId">1</string>
-
-    <!--  Flag to turn on the rendering of the above path or not  -->
-    <bool name="config_enableDisplayCutoutProtection">true</bool>
-
-</resources>
--- a/overlay/frameworks/base/packages/SystemUI/res/values/dimens.xml
+++ b/overlay/frameworks/base/packages/SystemUI/res/values/dimens.xml
@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-/**
- * Copyright (c) 2009, The Android Open Source Project
- * Copyright (C) 2023, The LineageOS Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-->
-
-<resources>
-    <!-- Height of the status bar header bar when on Keyguard -->
-    <dimen name="status_bar_header_height_keyguard">@*android:dimen/status_bar_height</dimen>
-
-    <!-- Margin on the left side of the carrier text on Keyguard -->
-    <dimen name="keyguard_carrier_text_margin">4dp</dimen>
-
-    <!--  Total minimum padding to enforce to ensure that the dot can always show  -->
-    <dimen name="ongoing_appops_dot_min_padding">14dp</dimen>
-</resources>
--- a/proprietary-files.txt
+++ b/proprietary-files.txt
@@ -171,6 +171,7 @@ vendor/etc/qdcm_calib_data_mipi_mot_cmd_visionox_1080p_dsc_655.xml
 # Fingerprint
 vendor/bin/hw/android.hardware.biometrics.fingerprint@2.1-focalservice
 vendor/bin/hw/android.hardware.biometrics.fingerprint@2.1-service-ets
+vendor/bin/hw/egis_ident
 vendor/etc/init/android.hardware.biometrics.fingerprint@2.1-focalservice.rc
 vendor/etc/init/android.hardware.biometrics.fingerprint@2.1-service-ets2.rc
 vendor/etc/init/init.ets.rc
@@ -189,8 +190,6 @@ vendor/usr/keylayout/uinput-egis.kl
 vendor/firmware/a630_sqe.fw

 # NFC (Samsung)
-vendor/etc/init/android.hardware.nfc@1.2-service.sec.rc
-vendor/etc/init/init.nfc.sec.rc
 vendor/etc/libnfc-sec-vendor.conf
 vendor/etc/sec_s3nrn4v_hwreg.bin
 vendor/etc/sec_s3nrn4v_swreg.bin
--- a/resource-overlay/device/Frameworks/Android.bp
+++ b/resource-overlay/device/Frameworks/Android.bp
@@ -0,0 +1,9 @@
+//
+// SPDX-FileCopyrightText: The LineageOS Project
+// SPDX-License-Identifier: Apache-2.0
+//
+
+runtime_resource_overlay {
+    name: "FrameworksResDevice",
+    vendor: true,
+}
--- a/resource-overlay/device/Frameworks/AndroidManifest.xml
+++ b/resource-overlay/device/Frameworks/AndroidManifest.xml
@@ -0,0 +1,11 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     SPDX-FileCopyrightText: The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<manifest xmlns:android="http://schemas.android.com/apk/res/android"
+          package="android.overlay.device">
+    <overlay android:targetPackage="android"
+             android:isStatic="true"
+             android:priority="300" />
+</manifest>
--- a/resource-overlay/device/Frameworks/res/values/config.xml
+++ b/resource-overlay/device/Frameworks/res/values/config.xml
@@ -1,26 +1,25 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!--
-/**
- * Copyright (c) 2009, The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
+     SPDX-FileCopyrightText: The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
 -->
+<resources>
+    <!-- Vibrator pattern for feedback about a long screen/key press -->
+    <integer-array name="config_longPressVibePattern">
+        <item>0</item>
+        <item>60</item>
+    </integer-array>

-<!-- These resources are around just to allow their values to be customized
-     for different hardware and product builds.  Do not translate. -->
+    <!-- Vibrator pattern for feedback about touching a virtual key -->
+    <integer-array name="config_virtualKeyVibePattern">
+        <item>0</item>
+        <item>50</item>
+    </integer-array>

-<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- Screen brightness used to dim the screen when the user activity
+         timeout expires.  May be less than the minimum allowed brightness setting
+         that can be set by the user. -->
+    <integer name="config_screenBrightnessDim">4</integer>

    <!-- Minimum allowable screen brightness to use in a very dark room.
         This value sets the floor for the darkest possible auto-brightness
@@ -31,63 +30,6 @@
         in darkness (although they may not be visible in a bright room). -->
    <integer name="config_screenBrightnessDark">2</integer>

-    <!-- Screen brightness used to dim the screen when the user activity
-         timeout expires.  May be less than the minimum allowed brightness setting
-         that can be set by the user. -->
-    <integer name="config_screenBrightnessDim">4</integer>
-
-    <!-- The default peak refresh rate for a given device. Change this value if you want to prevent
-         the framework from using higher refresh rates, even if display modes with higher refresh
-         rates are available from hardware composer. Only has an effect if the value is
-         non-zero. -->
-    <integer name="config_defaultPeakRefreshRate">90</integer>
-
-    <!-- Default refresh rate in the zone defined by brightness and ambient thresholds.
-         If non-positive, then the refresh rate is unchanged even if thresholds are configured. -->
-    <integer name="config_defaultRefreshRateInZone">90</integer>
-
-    <!-- The display uses different gamma curves for different refresh rates. It's hard for panel
-         vendors to tune the curves to have exact same brightness for different refresh rate. So
-         flicker could be observed at switch time. The issue is worse at the gamma lower end.
-         In addition, human eyes are more sensitive to the flicker at darker environment.
-         To prevent flicker, we only support higher refresh rates if the display brightness is above
-         a threshold.
-         For example, no higher refresh rate if
-             display brightness <= disp0 && ambient brightness <= amb0
-             || display brightness <= disp1 && ambient brightness <= amb1 -->
-    <integer-array translatable="false" name="config_brightnessThresholdsOfPeakRefreshRate">
-        <item>72</item>
-    </integer-array>
-    <integer-array translatable="false" name="config_ambientThresholdsOfPeakRefreshRate">
-        <item>-1</item>
-    </integer-array>
-
-    <!-- Array of desired screen brightness in nits corresponding to the lux values
-         in the config_autoBrightnessLevels array. The display brightness is defined as the measured
-         brightness of an all-white image.
-
-         If this is defined then:
-            - config_autoBrightnessLcdBacklightValues should not be defined
-            - config_screenBrightnessNits must be defined
-            - config_screenBrightnessBacklight must be defined
-
-         This array should have size one greater than the size of the config_autoBrightnessLevels
-         array. The brightness values must be non-negative and non-decreasing. This must be
-         overridden in platform specific overlays -->
-    <integer-array name="config_autoBrightnessDisplayValuesNits">
-        <item>2</item>
-        <item>7</item>
-        <item>10</item>
-        <item>12</item>
-        <item>24</item>
-        <item>95</item>
-        <item>111</item>
-        <item>149</item>
-        <item>192</item>
-        <item>252</item>
-        <item>500</item>
-    </integer-array>
-
    <!-- Array of light sensor lux values to define our levels for auto backlight brightness support.
         The N entries of this array define N + 1 control points as follows:
         (1-based arrays)
@@ -121,6 +63,32 @@
        <item>5500</item>
    </integer-array>

+    <!-- Array of desired screen brightness in nits corresponding to the lux values
+         in the config_autoBrightnessLevels array. The display brightness is defined as the measured
+         brightness of an all-white image.
+
+         If this is defined then:
+            - config_autoBrightnessLcdBacklightValues should not be defined
+            - config_screenBrightnessNits must be defined
+            - config_screenBrightnessBacklight must be defined
+
+         This array should have size one greater than the size of the config_autoBrightnessLevels
+         array. The brightness values must be non-negative and non-decreasing. This must be
+         overridden in platform specific overlays -->
+    <array name="config_autoBrightnessDisplayValuesNits">
+        <item>2</item>
+        <item>7</item>
+        <item>10</item>
+        <item>12</item>
+        <item>24</item>
+        <item>95</item>
+        <item>111</item>
+        <item>149</item>
+        <item>192</item>
+        <item>252</item>
+        <item>500</item>
+    </array>
+
    <!-- An array describing the screen's backlight values corresponding to the brightness
         values in the config_screenBrightnessNits array.

@@ -147,7 +115,7 @@
         brightness modes but only the maximum brightness value obtainable in a sustainable manner.

         This array should be equal in size to config_screenBrightnessBacklight -->
-    <integer-array name="config_screenBrightnessNits">
+    <array name="config_screenBrightnessNits">
        <item>0</item>
        <item>2</item>
        <item>7</item>
@@ -160,7 +128,13 @@
        <item>192</item>
        <item>252</item>
        <item>500</item>
-    </integer-array>
+    </array>
+
+    <!-- MMS user agent string -->
+    <string name="config_mms_user_agent" translatable="false">motog52</string>
+
+    <!-- MMS user agent prolfile url -->
+    <string name="config_mms_user_agent_profile_url" translatable="false">http://uaprof.motorola.com/phoneconfig/motov1/Profile/motov1.rdf</string>

    <!-- The bounding path of the cutout region of the main built-in display.
         Must either be empty if there is no cutout region, or a string that is parsable by
@@ -213,8 +187,25 @@
         -->
    <bool name="config_fillMainBuiltInDisplayCutout">true</bool>

-    <!-- Indicates whether device has a power button fingerprint sensor. -->
-    <bool name="config_is_powerbutton_fps" translatable="false">true</bool>
+    <!-- The default peak refresh rate for a given device. Change this value if you want to prevent
+         the framework from using higher refresh rates, even if display modes with higher refresh
+         rates are available from hardware composer. Only has an effect if the value is
+         non-zero. -->
+    <integer name="config_defaultPeakRefreshRate">90</integer>
+
+    <!-- Low zone brightness thresholds in the range [0, 255] -->
+    <integer-array translatable="false" name="config_brightnessThresholdsOfPeakRefreshRate">
+        <item>72</item>
+    </integer-array>
+
+    <!-- Low zone lux thresholds -->
+    <integer-array translatable="false" name="config_ambientThresholdsOfPeakRefreshRate">
+        <item>-1</item>
+    </integer-array>
+
+    <!-- Default refresh rate in the zone defined by brightness and ambient thresholds.
+         If non-positive, then the refresh rate is unchanged even if thresholds are configured. -->
+    <integer name="config_defaultRefreshRateInZone">90</integer>

    <!-- An array of arrays of side fingerprint sensor properties relative to each display.
         Note: this value is temporary and is expected to be queried directly
@@ -230,15 +221,6 @@
        <item>200</item> <!--item>sensorRadius</item-->
    </array>

-    <!-- Vibrator pattern for feedback about a long screen/key press -->
-    <integer-array name="config_longPressVibePattern">
-        <item>0</item>
-        <item>60</item>
-    </integer-array>
-
-    <!-- Vibrator pattern for feedback about touching a virtual key -->
-    <integer-array name="config_virtualKeyVibePattern">
-        <item>0</item>
-        <item>50</item>
-    </integer-array>
+    <!-- Indicates whether device has a power button fingerprint sensor. -->
+    <bool name="config_is_powerbutton_fps" translatable="false">true</bool>
 </resources>
--- a/resource-overlay/device/Frameworks/res/values/dimens.xml
+++ b/resource-overlay/device/Frameworks/res/values/dimens.xml
@@ -1,33 +1,9 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!--
-/**
- * Copyright (c) 2009, The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
+     SPDX-FileCopyrightText: The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
 -->
-
-<!-- These resources are around just to allow their values to be customized
-     for different hardware and product builds.  Do not translate. -->
-
-<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
-
-    <!-- Default radius of the software rounded corners. -->
-    <dimen name="rounded_corner_radius">95.0px</dimen>
-
-    <!-- Default paddings for content around the corners. -->
-    <dimen name="rounded_corner_content_padding">14dp</dimen>
-
+<resources>
    <!-- The default height of the status bar used in {@link SystemBarUtils#getStatusBarHeight} to
         calculate the status bar height. -->
    <dimen name="status_bar_height_default">28dp</dimen>
@@ -41,4 +17,10 @@
         Do not read this dimen directly. Use {@link SystemBarUtils#getStatusBarHeight} instead.
         -->
    <dimen name="status_bar_height_landscape">28dp</dimen>
+
+    <!-- Default radius of the software rounded corners. -->
+    <dimen name="rounded_corner_radius">95.0px</dimen>
+
+    <!-- Default paddings for content around the corners. -->
+    <dimen name="rounded_corner_content_padding">14dp</dimen>
 </resources>
--- a/resource-overlay/device/Frameworks/res/xml/power_profile.xml
+++ b/resource-overlay/device/Frameworks/res/xml/power_profile.xml
@@ -1,8 +1,12 @@
 <?xml version="1.0" encoding="utf-8"?>
+<!--
+     SPDX-FileCopyrightText: The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
 <device name="Android">
    <item name="none">0</item>
-    <item name="screen.on">130.97</item>
-    <item name="screen.full">455.02</item>
+    <item name="screen.on.display0">130.97</item>
+    <item name="screen.full.display0">455.02</item>
    <item name="wifi.on">3.01</item>
    <item name="wifi.active">78.83</item>
    <item name="wifi.scan">78.45</item>
--- a/resource-overlay/device/Settings/Android.bp
+++ b/resource-overlay/device/Settings/Android.bp
@@ -0,0 +1,9 @@
+//
+// SPDX-FileCopyrightText: The LineageOS Project
+// SPDX-License-Identifier: Apache-2.0
+//
+
+runtime_resource_overlay {
+    name: "SettingsResDevice",
+    vendor: true,
+}
--- a/resource-overlay/device/Settings/AndroidManifest.xml
+++ b/resource-overlay/device/Settings/AndroidManifest.xml
@@ -0,0 +1,13 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     SPDX-FileCopyrightText: The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<manifest xmlns:android="http://schemas.android.com/apk/res/android"
+    package="com.android.settings.overlay.device">
+
+    <overlay
+        android:isStatic="true"
+        android:priority="500"
+        android:targetPackage="com.android.settings" />
+</manifest>
--- a/resource-overlay/device/Settings/res/values/config.xml
+++ b/resource-overlay/device/Settings/res/values/config.xml
@@ -0,0 +1,12 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     SPDX-FileCopyrightText: The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- Whether to show min refresh rate in display settings -->
+    <bool name="config_show_min_refresh_rate_switch">true</bool>
+
+    <!-- Whether to show peak refresh rate in display settings -->
+    <bool name="config_show_peak_refresh_rate_switch">true</bool>
+</resources>
--- a/resource-overlay/device/SystemUI/Android.bp
+++ b/resource-overlay/device/SystemUI/Android.bp
@@ -0,0 +1,9 @@
+//
+// SPDX-FileCopyrightText: The LineageOS Project
+// SPDX-License-Identifier: Apache-2.0
+//
+
+runtime_resource_overlay {
+    name: "SystemUIResDevice",
+    vendor: true,
+}
--- a/resource-overlay/device/SystemUI/AndroidManifest.xml
+++ b/resource-overlay/device/SystemUI/AndroidManifest.xml
@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     SPDX-FileCopyrightText: The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<manifest xmlns:android="http://schemas.android.com/apk/res/android"
+          package="com.android.systemui.overlay.device">
+    <overlay android:targetPackage="com.android.systemui"
+             android:isStatic="true" />
+</manifest>
--- a/resource-overlay/device/SystemUI/res/values/config.xml
+++ b/resource-overlay/device/SystemUI/res/values/config.xml
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     SPDX-FileCopyrightText: The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<resources>
+    <!-- Doze: does this device support STATE_DOZE?  -->
+    <bool name="doze_display_state_supported">true</bool>
+
+    <!-- A path similar to frameworks/base/core/res/res/values/config.xml
+      config_mainBuiltInDisplayCutout that describes a path larger than the exact path of a outer
+      display cutout. If present as well as config_enableDisplayCutoutProtection is set to true,
+      then SystemUI will draw this "protection path" instead of the display cutout path that is
+      normally used for anti-aliasing.
+
+      This path will only be drawn when the front-facing camera turns on, otherwise the main
+      DisplayCutout path will be rendered
+       -->
+    <string translatable="false" name="config_frontBuiltInDisplayCutoutProtection">
+        M 503,63
+        a 37,37 0 1 0 74,0
+        a 37,37 0 1 0 -74,0
+        Z
+    </string>
+
+    <!-- ID for the camera of outer display that needs extra protection -->
+    <string translatable="false" name="config_protectedCameraId">1</string>
+
+    <!--  Flag to turn on the rendering of the above path or not  -->
+    <bool name="config_enableDisplayCutoutProtection">true</bool>
+</resources>
--- a/resource-overlay/device/SystemUI/res/values/dimens.xml
+++ b/resource-overlay/device/SystemUI/res/values/dimens.xml
@@ -0,0 +1,15 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     SPDX-FileCopyrightText: The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<resources>
+    <!-- Height of the status bar header bar when on Keyguard -->
+    <dimen name="status_bar_header_height_keyguard">@*android:dimen/status_bar_height</dimen>
+
+    <!-- Margin on the left side of the carrier text on Keyguard -->
+    <dimen name="keyguard_carrier_text_margin">4dp</dimen>
+
+    <!--  Total minimum padding to enforce to ensure that the dot can always show  -->
+    <dimen name="ongoing_appops_dot_min_padding">14dp</dimen>
+</resources>
--- a/resource-overlay/device/Wifi/Android.bp
+++ b/resource-overlay/device/Wifi/Android.bp
@@ -0,0 +1,9 @@
+//
+// SPDX-FileCopyrightText: The LineageOS Project
+// SPDX-License-Identifier: Apache-2.0
+//
+
+runtime_resource_overlay {
+    name: "WifiResDevice",
+    vendor: true,
+}
--- a/resource-overlay/device/Wifi/AndroidManifest.xml
+++ b/resource-overlay/device/Wifi/AndroidManifest.xml
@@ -0,0 +1,11 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     SPDX-FileCopyrightText: The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<manifest xmlns:android="http://schemas.android.com/apk/res/android"
+          package="com.android.wifi.resources.overlay.device">
+    <overlay android:targetPackage="com.android.wifi.resources"
+             android:isStatic="true"
+             android:priority="800" />
+</manifest>
--- a/resource-overlay/device/Wifi/res/values/config.xml
+++ b/resource-overlay/device/Wifi/res/values/config.xml
@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     SPDX-FileCopyrightText: The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<resources>
+    <!-- Do not translate. Default access point SSID used for tethering -->
+    <string name="wifi_tether_configure_ssid_default" translatable="false">moto g52</string>
+</resources>
--- a/setup-makefiles.py
+++ b/setup-makefiles.py
@@ -1 +1,5 @@
 #!./extract-files.py --regenerate_makefiles
+#
+# SPDX-FileCopyrightText: The LineageOS Project
+# SPDX-License-Identifier: Apache-2.0
+#
Author	SHA1	Message	Date
Deivid21	25d6dabecf	rhode: Go Back super partition size to devices Change-Id: I52b6a5e2bf986f42d240d47c2f3381fa1220c3a5	2025-10-15 23:10:34 -03:00
Deivid21	393d0f65ec	rhode: Build MotCamera4 from prebuilt source Change-Id: I2c44c0ea5c69aa63fa4e01effe4290b782c6d299 Signed-off-by: Deivid21 <david.parra.ignacio@gmail.com>	2025-10-15 23:09:57 -03:00
Deivid21	623b4b361e	rhode: init: Add Erofs filesystem type mount point Change-Id: I0bd2f193de4608b0d6899f1f2ad467bb5f33cc1c	2025-10-15 23:09:41 -03:00
Deivid21	900dd381d1	rhode: Adjustments for Evolution X Change-Id: Ifac6ab7e5feff0f93f6f3d1aa2d6f504c8fdcc23	2025-10-15 23:09:09 -03:00
Michael Bestas	b8c02f76a7	rhode: overlay: Enable min & peak refresh rate toggle in Settings Change-Id: Ia3e1a5ef92b666747cf1d8e362e88a09b21c2444	2025-10-15 23:08:48 -03:00
Michael Bestas	b8723cf800	rhode: Switch to AIDL samsung NFC HAL Change-Id: I968b959d19306b667de2839526e3f0fa80887b71	2025-10-15 23:08:00 -03:00
Deivid21	32dca8b728	rhode: Patch vidhance components with libui-v34 * EIS was broken, which caused hard crashes when switching to video mode in camera. Change-Id: If7d3b4417208fbb51466992aece7ec9b82a1cd41	2025-10-15 23:07:30 -03:00
Deivid21	948ea9135e	rhode: Add missing fingerprint binary Change-Id: I1dcba562ee6981292c41593c415d2010af4b4edb	2025-10-15 23:06:31 -03:00
Georg Veichtlbauer	64e8c48934	rhode: overlay: Update deprecated screen power items * screen.on -> screen.on.display0 * screen.full -> screen.full.display0 AOSP frameworks/base: 8ac63071a4e6da7e0740f5eb6c6753218efcfd3a Change-Id: Iad50e6cb63368e2d71e6fa1dbb6997c0f95d321e	2025-10-11 01:08:22 +03:00
Deivid21	6c0d52dced	rhode: overlay: Add wifi overlay and MMS UA profile Change-Id: Ida9a7044d13feb96b310c3d6f88fb801ba5df98d	2025-10-11 01:07:55 +03:00
Michael Bestas	f7aa02a893	rhode: Add missing copyright headers * And drop copyright years. Change-Id: I9992f279c6ca0090f5a98541a405e1e34be3378f	2025-10-11 00:26:52 +03:00
Michael Bestas	f8df0f8aa6	rhode: overlay: Convert overlays to Android.bp Also run everything through beautify_rro.py Change-Id: I3e24f2c505822ffd07eed32be6867288a11730ce	2025-10-11 00:26:29 +03:00