umi: overlay-lineage: Enable screen-off UDFPS support

umi: Welcome Evolution X
umi: Spoof BuildFingerprint as Pixel Beta
2025-11-27 10:15:47 +00:00 · 2025-11-17 20:12:26 +00:00 · 2025-11-17 20:12:26 +00:00 · 2025-11-17 15:15:53 +00:00 · 2025-11-17 15:15:53 +00:00 · 2025-11-17 15:15:53 +00:00
40 changed files with 942 additions and 496 deletions
--- a/BoardConfig.mk
+++ b/BoardConfig.mk
@@ -12,19 +12,9 @@ DEVICE_PATH := device/xiaomi/umi
 # Display
 TARGET_SCREEN_DENSITY := 440

-# Init
-TARGET_INIT_VENDOR_LIB := //$(DEVICE_PATH):init_xiaomi_umi
-TARGET_RECOVERY_DEVICE_MODULES := init_xiaomi_umi
-
-# Kernel
-TARGET_KERNEL_CONFIG += vendor/xiaomi/umi.config
-
 # OTA assert
 TARGET_OTA_ASSERT_DEVICE := umi

-# PowerShare
-TARGET_POWERSHARE_PATH := /sys/devices/platform/soc/c440000.qcom,spmi/spmi-0/spmi0-02/c440000.qcom,spmi:qcom,pm8150b@2:qcom,qpnp-smb5/power_supply/wireless/reverse_chg_mode
-
 # Properties
 TARGET_VENDOR_PROP += $(DEVICE_PATH)/vendor.prop

--- a/configs/sensors/hals.conf
+++ b/configs/sensors/hals.conf
@@ -0,0 +1,4 @@
+sensors.elliptic.so
+sensors.ssc.so
+sensors.touch.so
+sensors.udfps.so
--- a/device.mk
+++ b/device.mk
@@ -4,9 +4,6 @@
 # SPDX-License-Identifier: Apache-2.0
 #

-# Fingerprint
-TARGET_HAS_UDFPS := true
-
 # Inherit from sm8250-common
 $(call inherit-product, device/xiaomi/sm8250-common/kona.mk)

@@ -18,10 +15,6 @@ PRODUCT_AAPT_PREF_CONFIG := xxhdpi
 PRODUCT_COPY_FILES += \
    $(call find-copy-subdir-files,*,$(LOCAL_PATH)/audio/,$(TARGET_COPY_OUT_VENDOR)/etc)

-# Boot animation
-TARGET_SCREEN_HEIGHT := 2340
-TARGET_SCREEN_WIDTH := 1080
-
 # Camera
 PRODUCT_PACKAGES += \
    libMegviiFacepp-0.5.2 \
@@ -32,16 +25,14 @@ PRODUCT_PACKAGES += \
 PRODUCT_COPY_FILES += \
    $(call find-copy-subdir-files,qdcm_calib_data_*.xml,$(LOCAL_PATH)/qdcm/,$(TARGET_COPY_OUT_VENDOR)/etc/)

+# Init
+$(call soong_config_set,xiaomi_kona,variant_lib,//$(LOCAL_PATH):libvariant_xiaomi_umi)
+
 # Overlays
 DEVICE_PACKAGE_OVERLAYS += \
    $(LOCAL_PATH)/overlay \
    $(LOCAL_PATH)/overlay-lineage

-PRODUCT_PACKAGES += \
-    xiaomi_umi_hwlevel_default_overlay \
-    xiaomi_umi_hwlevel_p01_overlay \
-    xiaomi_umi_hwlevel_p1_overlay
-
 # Permissions
 PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.hardware.sensor.barometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.barometer.xml
@@ -51,12 +42,18 @@ PRODUCT_SHIPPING_API_LEVEL := 29

 # PowerShare
 PRODUCT_PACKAGES += \
-    vendor.lineage.powershare@1.0-service.default
+    vendor.lineage.powershare-service.default
+
+$(call soong_config_set,lineage_powershare,powershare_path,/sys/class/power_supply/wireless/reverse_chg_mode)

 # Rootdir
 PRODUCT_PACKAGES += \
    init.device.rc

+# Sensors
+PRODUCT_COPY_FILES += \
+    $(LOCAL_PATH)/configs/sensors/hals.conf:$(TARGET_COPY_OUT_VENDOR)/etc/sensors/hals.conf
+
 # Soong namespaces
 PRODUCT_SOONG_NAMESPACES += \
    $(LOCAL_PATH)
--- a/evolution.dependencies
+++ b/evolution.dependencies
@@ -0,0 +1,37 @@
+[
+  {
+    "repository": "device_xiaomi_sm8250-common",
+    "target_path": "device/xiaomi/sm8250-common"
+  },
+  {
+    "repository": "SM8250-Development/vendor_xiaomi_sm8250-common",
+    "target_path": "vendor/xiaomi/sm8250-common",
+    "remote": "gitlab"
+  },
+  {
+    "repository": "SM8250-Development/vendor_xiaomi_umi",
+    "target_path": "vendor/xiaomi/umi",
+    "remote": "gitlab"
+  },
+  {
+    "repository": "SM8250-Development/kernel_xiaomi_sm8250",
+    "target_path": "kernel/xiaomi/sm8250",
+    "remote": "github-non-los"
+  },
+  {
+    "repository": "hardware_xiaomi",
+    "target_path": "hardware/xiaomi"
+  },
+  {
+    "repository": "Xiaomi-Development/device_xiaomi_camera",
+    "target_path": "device/xiaomi/camera",
+    "remote": "github-non-los",
+    "branch": "aosp-16"
+  },
+  { 
+    "repository": "xiaomi-development/vendor_xiaomi_camera",
+    "target_path": "vendor/xiaomi/camera",
+    "remote": "gitlab",
+    "branch": "aosp-16"
+  }
+]
--- a/extract-files.py
+++ b/extract-files.py
@@ -0,0 +1,75 @@
+#!/usr/bin/env -S PYTHONPATH=../../../tools/extract-utils python3
+#
+# SPDX-FileCopyrightText: 2024 The LineageOS Project
+# SPDX-License-Identifier: Apache-2.0
+#
+
+from extract_utils.fixups_blob import (
+    blob_fixup,
+    blob_fixups_user_type,
+)
+from extract_utils.fixups_lib import (
+    lib_fixups,
+)
+from extract_utils.main import (
+    ExtractUtils,
+    ExtractUtilsModule,
+)
+
+blob_fixups: blob_fixups_user_type = {
+    'vendor/etc/init/init.batterysecret.rc': blob_fixup()
+        .regex_replace('.*seclabel u:r:batterysecret:s0\n', ''),
+    'vendor/lib/libaudioroute_ext.so': blob_fixup()
+        .replace_needed('libaudioroute.so', 'libaudioroute-v34.so'),
+    'vendor/lib/hw/audio.primary.umi.so': blob_fixup()
+        .binary_regex_replace(
+            b'/vendor/lib/liba2dpoffload.so',
+            b'liba2dpoffload_umi.so\x00\x00\x00\x00\x00\x00\x00\x00',
+        )
+        .replace_needed('libaudioroute.so', 'libaudioroute-v34.so'),
+    'vendor/lib64/camera/components/com.mi.node.watermark.so': blob_fixup()
+        .add_needed('libpiex_shim.so'),
+    (
+        'vendor/lib64/libMIAIHDRhvx_interface.so',
+        'vendor/lib64/libarcsoft_hdrplus_hvx_stub.so',
+        'vendor/lib64/libarcsoft_super_night_raw.so',
+        'vendor/lib64/libmialgo_rfs.so',
+    ): blob_fixup()
+        .clear_symbol_version('remote_handle_close')
+        .clear_symbol_version('remote_handle_invoke')
+        .clear_symbol_version('remote_handle_open')
+        .clear_symbol_version('remote_register_buf')
+        .clear_symbol_version('remote_register_buf_attr'),
+    (
+        'vendor/lib64/libalAILDC.so',
+        'vendor/lib64/libalLDC.so',
+        'vendor/lib64/libalhLDC.so',
+    ): blob_fixup()
+        .clear_symbol_version('AHardwareBuffer_allocate')
+        .clear_symbol_version('AHardwareBuffer_describe')
+        .clear_symbol_version('AHardwareBuffer_lock')
+        .clear_symbol_version('AHardwareBuffer_release')
+        .clear_symbol_version('AHardwareBuffer_unlock'),
+    'vendor/lib64/vendor.qti.hardware.camera.postproc@1.0-service-impl.so': blob_fixup()
+        .binary_regex_replace(b'\x9A\x0A\x00\x94', b'\x1F\x20\x03\xD5'),
+}  # fmt: skip
+
+namespace_imports = [
+    'hardware/qcom-caf/common/libqti-perfd-client',
+    'hardware/xiaomi',
+    'vendor/qcom/opensource/display',
+    'vendor/xiaomi/sm8250-common',
+    'hardware/qcom-caf/sm8250',
+]
+
+module = ExtractUtilsModule(
+    'umi',
+    'xiaomi',
+    blob_fixups=blob_fixups,
+    lib_fixups=lib_fixups,
+    namespace_imports=namespace_imports,
+)
+
+if __name__ == '__main__':
+    utils = ExtractUtils.device(module)
+    utils.run()
--- a/extract-files.sh
+++ b/extract-files.sh
@@ -1,51 +0,0 @@
-#!/bin/bash
-#
-# SPDX-FileCopyrightText: 2016 The CyanogenMod Project
-# SPDX-FileCopyrightText: 2017-2024 The LineageOS Project
-# SPDX-License-Identifier: Apache-2.0
-#
-
-function blob_fixup() {
-    case "${1}" in
-        vendor/etc/init/init.batterysecret.rc)
-            [ "$2" = "" ] && return 0
-            sed -i "/seclabel u:r:batterysecret:s0/d" "${2}"
-            ;;
-        vendor/lib/hw/audio.primary.umi.so)
-            [ "$2" = "" ] && return 0
-            sed -i "s|/vendor/lib/liba2dpoffload\.so|liba2dpoffload_umi\.so\x00\x00\x00\x00\x00\x00\x00\x00|g" "${2}"
-            ;;
-        vendor/lib64/camera/components/com.mi.node.watermark.so)
-            [ "$2" = "" ] && return 0
-            grep -q "libpiex_shim.so" "${2}" || "${PATCHELF}" --add-needed "libpiex_shim.so" "${2}"
-            ;;
-        vendor/lib64/vendor.qti.hardware.camera.postproc@1.0-service-impl.so)
-            [ "$2" = "" ] && return 0
-            "${SIGSCAN}" -p "9A 0A 00 94" -P "1F 20 03 D5" -f "${2}"
-            ;;
-        *)
-            return 1
-            ;;
-    esac
-
-    return 0
-}
-
-function blob_fixup_dry() {
-    blob_fixup "$1" ""
-}
-
-# If we're being sourced by the common script that we called,
-# stop right here. No need to go down the rabbit hole.
-if [ "${BASH_SOURCE[0]}" != "${0}" ]; then
-    return
-fi
-
-set -e
-
-export DEVICE=umi
-export DEVICE_COMMON=sm8250-common
-export VENDOR=xiaomi
-export VENDOR_COMMON=${VENDOR}
-
-"./../../${VENDOR_COMMON}/${DEVICE_COMMON}/extract-files.sh" "$@"
--- a/libinit/Android.bp
+++ b/libinit/Android.bp
@@ -1,13 +1,12 @@
 //
-// Copyright (C) 2021 The LineageOS Project
+// Copyright (C) 2021-2025 The LineageOS Project
 //
 // SPDX-License-Identifier: Apache-2.0
 //

 cc_library_static {
-    name: "init_xiaomi_umi",
-    srcs: ["init_xiaomi_umi.cpp"],
-    whole_static_libs: ["//device/xiaomi/sm8250-common:libinit_xiaomi_kona"],
-    include_dirs: ["system/core/init"],
+    name: "libvariant_xiaomi_umi",
+    srcs: ["libvariant_xiaomi_umi.cpp"],
+    header_libs: ["//device/xiaomi/sm8250-common:libvariant_headers"],
    recovery_available: true,
 }
--- a/libinit/init_xiaomi_umi.cpp
+++ b/libinit/init_xiaomi_umi.cpp
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) 2021 The LineageOS Project
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
-#include <libinit_dalvik_heap.h>
-#include <libinit_variant.h>
-
-#include "vendor_init.h"
-
-static const variant_info_t umi_info = {
-    .hwc_value = "",
-    .sku_value = "",
-
-    .brand = "Xiaomi",
-    .device = "umi",
-    .marketname = "",
-    .model = "Mi 10",
-    .build_fingerprint = "Xiaomi/umi_global/umi:13/RKQ1.211001.001/V14.0.5.0.TJBMIXM:user/release-keys",
-
-    .nfc = true,
-};
-
-void vendor_load_properties() {
-    set_variant_props(umi_info);
-    set_dalvik_heap();
-}
--- a/libinit/libvariant_xiaomi_umi.cpp
+++ b/libinit/libvariant_xiaomi_umi.cpp
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2021-2025 The LineageOS Project
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include <libvariant.h>
+
+static const variant_info umi_info = {
+    .hwc_value = "",
+    .sku_value = "",
+
+    .brand = "Xiaomi",
+    .device = "umi",
+    .marketname = "",
+    .model = "Mi 10",
+    .build_fingerprint = "Xiaomi/umi_global/umi:13/TKQ1.221114.001/V816.0.3.0.TJBMIXM:user/release-keys",
+
+    .nfc = true,
+};
+
+const std::vector<variant_info> variants = {
+    umi_info,
+};
--- a/lineage.dependencies
+++ b/lineage.dependencies
@@ -1,6 +0,0 @@
-[
-  {
-    "repository": "android_device_xiaomi_sm8250-common",
-    "target_path": "device/xiaomi/sm8250-common"
-  }
-]
--- a/lineage_umi.mk
+++ b/lineage_umi.mk
@@ -14,6 +14,18 @@ $(call inherit-product, vendor/lineage/config/common_full_phone.mk)
 # Inherit from umi device
 $(call inherit-product, device/xiaomi/umi/device.mk)

+# Camera
+include device/xiaomi/camera/miuicamera.mk
+
+# Build Flags
+TARGET_SCREEN_HEIGHT          := 2340
+TARGET_SCREEN_WIDTH           := 1080
+TARGET_USES_MINI_GAPPS        := true
+TARGET_BUILD_DEVICE_AS_WEBCAM := true
+TARGET_HAS_UDFPS              := true
+TARGET_INCLUDE_ACCORD         := false
+BUILD_BCR                     := true
+
 PRODUCT_NAME := lineage_umi
 PRODUCT_DEVICE := umi
 PRODUCT_MANUFACTURER := Xiaomi
@@ -23,6 +35,4 @@ PRODUCT_MODEL := Mi 10
 PRODUCT_GMS_CLIENTID_BASE := android-xiaomi

 PRODUCT_BUILD_PROP_OVERRIDES += \
-    PRIVATE_BUILD_DESC="umi-user 13 RKQ1.211001.001 V14.0.5.0.TJBMIXM release-keys"
-
-BUILD_FINGERPRINT := Xiaomi/umi_global/umi:13/RKQ1.211001.001/V14.0.5.0.TJBMIXM:user/release-keys
+    BuildDesc="umi-user 13 TKQ1.221114.001 V816.0.3.0.TJBMIXM release-keys" \
--- a/overlay-lineage/frameworks/base/core/res/res/values/config.xml
+++ b/overlay-lineage/frameworks/base/core/res/res/values/config.xml
@@ -44,61 +44,22 @@
    <integer-array name="config_autoBrightnessLevels">
        <item>1</item>
        <item>2</item>
+        <item>3</item>
        <item>4</item>
-        <item>6</item>
        <item>8</item>
-        <item>10</item>
-        <item>15</item>
+        <item>12</item>
        <item>20</item>
-        <item>25</item>
-        <item>30</item>
-        <item>35</item>
-        <item>40</item>
-        <item>45</item>
-        <item>50</item>
+        <item>33</item>
        <item>55</item>
-        <item>60</item>
-        <item>65</item>
-        <item>70</item>
-        <item>75</item>
-        <item>80</item>
-        <item>85</item>
        <item>90</item>
-        <item>95</item>
-        <item>100</item>
-        <item>120</item>
-        <item>140</item>
-        <item>160</item>
-        <item>180</item>
-        <item>200</item>
-        <item>220</item>
-        <item>240</item>
-        <item>260</item>
-        <item>280</item>
-        <item>300</item>
-        <item>320</item>
-        <item>340</item>
-        <item>360</item>
-        <item>380</item>
-        <item>400</item>
-        <item>420</item>
-        <item>440</item>
-        <item>460</item>
-        <item>480</item>
-        <item>500</item>
-        <item>700</item>
-        <item>900</item>
-        <item>1100</item>
-        <item>1300</item>
-        <item>1500</item>
-        <item>1700</item>
-        <item>1900</item>
-        <item>2000</item>
-        <item>2500</item>
-        <item>3000</item>
-        <item>3500</item>
-        <item>4000</item>
-        <item>4500</item>
+        <item>148</item>
+        <item>245</item>
+        <item>403</item>
+        <item>665</item>
+        <item>1097</item>
+        <item>1808</item>
+        <item>2981</item>
+        <item>5000</item>
    </integer-array>

    <!-- Array of desired screen brightness in nits corresponding to the lux values
@@ -115,66 +76,26 @@
         array. The brightness values must be non-negative and non-decreasing. This must be
         overridden in platform specific overlays -->
    <array name="config_autoBrightnessDisplayValuesNits">
-        <item>5</item>
-        <item>5</item>
-        <item>5</item>
-        <item>17</item>
-        <item>24</item>
-        <item>31</item>
-        <item>34</item>
-        <item>46</item>
-        <item>59</item>
-        <item>76</item>
-        <item>81</item>
-        <item>82</item>
-        <item>82</item>
-        <item>82</item>
-        <item>83</item>
-        <item>83</item>
-        <item>83</item>
-        <item>84</item>
-        <item>84</item>
-        <item>85</item>
-        <item>85</item>
-        <item>85</item>
-        <item>85</item>
-        <item>86</item>
-        <item>86</item>
-        <item>87</item>
-        <item>89</item>
-        <item>90</item>
-        <item>91</item>
-        <item>93</item>
-        <item>94</item>
-        <item>96</item>
-        <item>97</item>
-        <item>99</item>
-        <item>100</item>
-        <item>101</item>
-        <item>104</item>
-        <item>105</item>
-        <item>106</item>
-        <item>108</item>
-        <item>109</item>
-        <item>111</item>
-        <item>112</item>
-        <item>114</item>
-        <item>116</item>
-        <item>137</item>
-        <item>157</item>
-        <item>180</item>
-        <item>205</item>
-        <item>226</item>
-        <item>257</item>
-        <item>280</item>
-        <item>295</item>
-        <item>369</item>
-        <item>434</item>
-        <item>500</item>
-        <item>500</item>
-        <item>500</item>
+        <item>10.45935</item>   <!-- 0-1 -->
+        <item>29.25559</item>   <!-- 1-2 -->
+        <item>34.240692</item>  <!-- 2-3 -->
+        <item>37.514347</item>  <!-- 3-4 -->
+        <item>40.018696</item>  <!-- 4-8 -->
+        <item>46.885098</item>  <!-- 8-12 -->
+        <item>51.626434</item>  <!-- 12-20 -->
+        <item>58.610405</item>  <!-- 20-33 -->
+        <item>66.890915</item>  <!-- 33-55 -->
+        <item>77.61644</item>   <!-- 55-90 -->
+        <item>90.221886</item>  <!-- 90-148 -->
+        <item>105.80314</item>  <!-- 148-245 -->
+        <item>126.073845</item> <!-- 245-403 -->
+        <item>154.16931</item>  <!-- 403-665 -->
+        <item>191.83717</item>  <!-- 665-1097 -->
+        <item>240.74442</item>  <!-- 1097-1808 -->
+        <item>294.84857</item>  <!-- 1808-2981 -->
+        <item>348.05453</item>  <!-- 2981-5000 -->
+        <item>389.70</item>     <!-- 5000+ -->
    </array>
-
    <!-- An array of floats describing the screen brightness in nits corresponding to the backlight
         values in the config_screenBrightnessBacklight array.  On OLED displays these  values
         should be measured with an all white image while the display is in the fully on state.
@@ -183,74 +104,261 @@

         This array should be equal in size to config_screenBrightnessBacklight -->
    <array name="config_screenBrightnessNits">
-        <item>2.0482</item>
-        <item>2.7841</item>
-        <item>3.79505</item>
-        <item>4.4748</item>
-        <item>5.08</item>
-        <item>6.4233</item>
-        <item>8.0848</item>
-        <item>11.6607</item>
-        <item>13.2347</item>
-        <item>15.0676</item>
-        <item>16.8302</item>
-        <item>18.4261</item>
-        <item>20.3103</item>
-        <item>21.9042</item>
-        <item>23.5456</item>
-        <item>25.2137</item>
-        <item>27.1769</item>
-        <item>28.9571</item>
-        <item>30.5244</item>
-        <item>32.3535</item>
-        <item>34.0867</item>
-        <item>42.366</item>
-        <item>51.1309</item>
-        <item>59.52</item>
-        <item>67.744</item>
-        <item>75.9738</item>
-        <item>84.6332</item>
-        <item>94.1525</item>
-        <item>102.2207</item>
-        <item>110.4878</item>
-        <item>117.0405</item>
-        <item>124.3733</item>
-        <item>130.9928</item>
-        <item>140.4247</item>
-        <item>149.3156</item>
-        <item>157.1995</item>
-        <item>165.3651</item>
-        <item>173.2726</item>
-        <item>181.4272</item>
-        <item>189.1402</item>
-        <item>197.5334</item>
-        <item>205.6301</item>
-        <item>213.9381</item>
-        <item>222.2769</item>
-        <item>230.0891</item>
-        <item>238.6084</item>
-        <item>246.5399</item>
-        <item>255.6544</item>
-        <item>263.6221</item>
-        <item>271.9324</item>
-        <item>279.1449</item>
-        <item>288.5736</item>
-        <item>297.6628</item>
-        <item>306.1899</item>
-        <item>314.4511</item>
-        <item>322.1404</item>
-        <item>330.969</item>
-        <item>338.2251</item>
-        <item>346.2251</item>
-        <item>354.567</item>
-        <item>370.799</item>
-        <item>413.1738</item>
-        <item>415.6397</item>
-        <item>417.264</item>
-        <item>419.264</item>
-        <item>421.264</item>
-        <item>424.646</item>
-        <item>427.6287</item>
+        <item>2.2</item>
+        <item>3.7</item>
+        <item>5.34</item>
+        <item>6.98</item>
+        <item>8.63</item>
+        <item>10.27</item>
+        <item>11.91</item>
+        <item>13.55</item>
+        <item>15.2</item>
+        <item>16.84</item>
+        <item>18.48</item>
+        <item>20.12</item>
+        <item>21.76</item>
+        <item>23.41</item>
+        <item>25.05</item>
+        <item>26.69</item>
+        <item>28.33</item>
+        <item>29.98</item>
+        <item>31.62</item>
+        <item>33.26</item>
+        <item>34.9</item>
+        <item>36.54</item>
+        <item>38.19</item>
+        <item>39.83</item>
+        <item>41.47</item>
+        <item>43.11</item>
+        <item>44.76</item>
+        <item>46.4</item>
+        <item>48.04</item>
+        <item>49.68</item>
+        <item>51.32</item>
+        <item>52.97</item>
+        <item>54.61</item>
+        <item>56.25</item>
+        <item>57.89</item>
+        <item>59.54</item>
+        <item>61.18</item>
+        <item>62.82</item>
+        <item>64.46</item>
+        <item>66.1</item>
+        <item>67.75</item>
+        <item>69.39</item>
+        <item>71.03</item>
+        <item>72.67</item>
+        <item>74.32</item>
+        <item>75.96</item>
+        <item>77.6</item>
+        <item>79.24</item>
+        <item>80.88</item>
+        <item>82.53</item>
+        <item>84.17</item>
+        <item>85.81</item>
+        <item>87.45</item>
+        <item>89.1</item>
+        <item>90.74</item>
+        <item>92.38</item>
+        <item>94.02</item>
+        <item>95.66</item>
+        <item>97.31</item>
+        <item>98.95</item>
+        <item>100.59</item>
+        <item>102.23</item>
+        <item>103.88</item>
+        <item>105.52</item>
+        <item>107.16</item>
+        <item>108.8</item>
+        <item>110.44</item>
+        <item>112.09</item>
+        <item>113.73</item>
+        <item>115.37</item>
+        <item>117.01</item>
+        <item>118.66</item>
+        <item>120.3</item>
+        <item>121.94</item>
+        <item>123.58</item>
+        <item>125.22</item>
+        <item>126.87</item>
+        <item>128.51</item>
+        <item>130.15</item>
+        <item>131.79</item>
+        <item>133.44</item>
+        <item>135.08</item>
+        <item>136.72</item>
+        <item>138.36</item>
+        <item>140</item>
+        <item>142.06</item>
+        <item>143.7</item>
+        <item>145.34</item>
+        <item>146.98</item>
+        <item>148.63</item>
+        <item>150.27</item>
+        <item>151.91</item>
+        <item>153.55</item>
+        <item>155.2</item>
+        <item>156.84</item>
+        <item>158.48</item>
+        <item>160.12</item>
+        <item>161.76</item>
+        <item>163.41</item>
+        <item>165.05</item>
+        <item>166.69</item>
+        <item>168.33</item>
+        <item>169.98</item>
+        <item>171.62</item>
+        <item>173.26</item>
+        <item>174.9</item>
+        <item>176.54</item>
+        <item>178.19</item>
+        <item>179.83</item>
+        <item>181.47</item>
+        <item>183.11</item>
+        <item>184.76</item>
+        <item>186.4</item>
+        <item>188.04</item>
+        <item>189.68</item>
+        <item>191.32</item>
+        <item>192.97</item>
+        <item>194.61</item>
+        <item>196.25</item>
+        <item>197.89</item>
+        <item>199.54</item>
+        <item>201.18</item>
+        <item>202.82</item>
+        <item>204.46</item>
+        <item>206.1</item>
+        <item>207.75</item>
+        <item>209.39</item>
+        <item>211.03</item>
+        <item>212.67</item>
+        <item>214.32</item>
+        <item>215.96</item>
+        <item>217.6</item>
+        <item>219.24</item>
+        <item>220.88</item>
+        <item>222.53</item>
+        <item>224.17</item>
+        <item>225.81</item>
+        <item>227.45</item>
+        <item>229.1</item>
+        <item>230.74</item>
+        <item>232.38</item>
+        <item>234.02</item>
+        <item>235.66</item>
+        <item>237.31</item>
+        <item>238.95</item>
+        <item>240.59</item>
+        <item>242.23</item>
+        <item>243.88</item>
+        <item>245.52</item>
+        <item>247.16</item>
+        <item>248.8</item>
+        <item>250.44</item>
+        <item>252.09</item>
+        <item>253.73</item>
+        <item>255.37</item>
+        <item>257.01</item>
+        <item>258.66</item>
+        <item>260.3</item>
+        <item>261.94</item>
+        <item>263.58</item>
+        <item>265.22</item>
+        <item>266.87</item>
+        <item>268.51</item>
+        <item>270.15</item>
+        <item>271.79</item>
+        <item>273.44</item>
+        <item>275.08</item>
+        <item>276.72</item>
+        <item>278.36</item>
+        <item>280</item>
+        <item>282.06</item>
+        <item>283.7</item>
+        <item>285.34</item>
+        <item>286.98</item>
+        <item>288.63</item>
+        <item>290.27</item>
+        <item>291.91</item>
+        <item>293.55</item>
+        <item>295.2</item>
+        <item>296.84</item>
+        <item>298.48</item>
+        <item>300.12</item>
+        <item>301.76</item>
+        <item>303.41</item>
+        <item>305.05</item>
+        <item>306.69</item>
+        <item>308.33</item>
+        <item>309.98</item>
+        <item>311.62</item>
+        <item>313.26</item>
+        <item>314.9</item>
+        <item>316.54</item>
+        <item>318.19</item>
+        <item>319.83</item>
+        <item>321.47</item>
+        <item>323.11</item>
+        <item>324.76</item>
+        <item>326.4</item>
+        <item>328.04</item>
+        <item>329.68</item>
+        <item>331.32</item>
+        <item>332.97</item>
+        <item>334.61</item>
+        <item>336.25</item>
+        <item>337.89</item>
+        <item>339.54</item>
+        <item>341.18</item>
+        <item>342.82</item>
+        <item>344.46</item>
+        <item>346.1</item>
+        <item>347.75</item>
+        <item>349.39</item>
+        <item>351.03</item>
+        <item>352.67</item>
+        <item>354.32</item>
+        <item>355.96</item>
+        <item>357.6</item>
+        <item>359.24</item>
+        <item>360.88</item>
+        <item>362.53</item>
+        <item>364.17</item>
+        <item>365.81</item>
+        <item>367.45</item>
+        <item>369.1</item>
+        <item>370.74</item>
+        <item>372.38</item>
+        <item>374.02</item>
+        <item>375.66</item>
+        <item>377.31</item>
+        <item>378.95</item>
+        <item>380.59</item>
+        <item>382.23</item>
+        <item>383.88</item>
+        <item>385.52</item>
+        <item>387.16</item>
+        <item>388.8</item>
+        <item>390.44</item>
+        <item>392.09</item>
+        <item>393.73</item>
+        <item>395.37</item>
+        <item>397.01</item>
+        <item>398.66</item>
+        <item>400.3</item>
+        <item>401.94</item>
+        <item>403.58</item>
+        <item>405.22</item>
+        <item>406.87</item>
+        <item>408.51</item>
+        <item>410.15</item>
+        <item>411.79</item>
+        <item>413.44</item>
+        <item>415.08</item>
+        <item>416.72</item>
+        <item>418.36</item>
+        <item>420</item>
    </array>

    <!-- An array describing the screen's backlight values corresponding to the brightness
@@ -258,7 +366,6 @@

         This array should be equal in size to config_screenBrightnessBacklight. -->
    <integer-array name="config_screenBrightnessBacklight">
-        <item>0</item>
        <item>1</item>
        <item>2</item>
        <item>3</item>
@@ -279,52 +386,240 @@
        <item>18</item>
        <item>19</item>
        <item>20</item>
+        <item>21</item>
+        <item>22</item>
+        <item>23</item>
+        <item>24</item>
        <item>25</item>
+        <item>26</item>
+        <item>27</item>
+        <item>28</item>
+        <item>29</item>
        <item>30</item>
+        <item>31</item>
+        <item>32</item>
+        <item>33</item>
+        <item>34</item>
        <item>35</item>
+        <item>36</item>
+        <item>37</item>
+        <item>38</item>
+        <item>39</item>
        <item>40</item>
+        <item>41</item>
+        <item>42</item>
+        <item>43</item>
+        <item>44</item>
        <item>45</item>
+        <item>46</item>
+        <item>47</item>
+        <item>48</item>
+        <item>49</item>
        <item>50</item>
+        <item>51</item>
+        <item>52</item>
+        <item>53</item>
+        <item>54</item>
        <item>55</item>
+        <item>56</item>
+        <item>57</item>
+        <item>58</item>
+        <item>59</item>
        <item>60</item>
+        <item>61</item>
+        <item>62</item>
+        <item>63</item>
+        <item>64</item>
        <item>65</item>
+        <item>66</item>
+        <item>67</item>
+        <item>68</item>
+        <item>69</item>
        <item>70</item>
+        <item>71</item>
+        <item>72</item>
+        <item>73</item>
+        <item>74</item>
        <item>75</item>
+        <item>76</item>
+        <item>77</item>
+        <item>78</item>
+        <item>79</item>
        <item>80</item>
+        <item>81</item>
+        <item>82</item>
+        <item>83</item>
+        <item>84</item>
        <item>85</item>
+        <item>86</item>
+        <item>87</item>
+        <item>88</item>
+        <item>89</item>
        <item>90</item>
+        <item>91</item>
+        <item>92</item>
+        <item>93</item>
+        <item>94</item>
        <item>95</item>
+        <item>96</item>
+        <item>97</item>
+        <item>98</item>
+        <item>99</item>
        <item>100</item>
+        <item>101</item>
+        <item>102</item>
+        <item>103</item>
+        <item>104</item>
        <item>105</item>
+        <item>106</item>
+        <item>107</item>
+        <item>108</item>
+        <item>109</item>
        <item>110</item>
+        <item>111</item>
+        <item>112</item>
+        <item>113</item>
+        <item>114</item>
        <item>115</item>
+        <item>116</item>
+        <item>117</item>
+        <item>118</item>
+        <item>119</item>
        <item>120</item>
+        <item>121</item>
+        <item>122</item>
+        <item>123</item>
+        <item>124</item>
        <item>125</item>
+        <item>126</item>
+        <item>127</item>
+        <item>128</item>
+        <item>129</item>
        <item>130</item>
+        <item>131</item>
+        <item>132</item>
+        <item>133</item>
+        <item>134</item>
        <item>135</item>
+        <item>136</item>
+        <item>137</item>
+        <item>138</item>
+        <item>139</item>
        <item>140</item>
+        <item>141</item>
+        <item>142</item>
+        <item>143</item>
+        <item>144</item>
        <item>145</item>
+        <item>146</item>
+        <item>147</item>
+        <item>148</item>
+        <item>149</item>
        <item>150</item>
+        <item>151</item>
+        <item>152</item>
+        <item>153</item>
+        <item>154</item>
        <item>155</item>
+        <item>156</item>
+        <item>157</item>
+        <item>158</item>
+        <item>159</item>
        <item>160</item>
+        <item>161</item>
+        <item>162</item>
+        <item>163</item>
+        <item>164</item>
        <item>165</item>
+        <item>166</item>
+        <item>167</item>
+        <item>168</item>
+        <item>169</item>
        <item>170</item>
+        <item>171</item>
+        <item>172</item>
+        <item>173</item>
        <item>174</item>
+        <item>175</item>
+        <item>176</item>
+        <item>177</item>
+        <item>178</item>
        <item>179</item>
+        <item>180</item>
+        <item>181</item>
+        <item>182</item>
+        <item>183</item>
        <item>184</item>
+        <item>185</item>
+        <item>186</item>
+        <item>187</item>
+        <item>188</item>
        <item>189</item>
+        <item>190</item>
+        <item>191</item>
+        <item>192</item>
+        <item>193</item>
        <item>194</item>
+        <item>195</item>
+        <item>196</item>
+        <item>197</item>
+        <item>198</item>
        <item>199</item>
+        <item>200</item>
+        <item>201</item>
+        <item>202</item>
+        <item>203</item>
        <item>204</item>
+        <item>205</item>
+        <item>206</item>
+        <item>207</item>
+        <item>208</item>
        <item>209</item>
+        <item>210</item>
+        <item>211</item>
+        <item>212</item>
+        <item>213</item>
        <item>214</item>
+        <item>215</item>
+        <item>216</item>
+        <item>217</item>
+        <item>218</item>
        <item>219</item>
+        <item>220</item>
+        <item>221</item>
+        <item>222</item>
+        <item>223</item>
        <item>224</item>
+        <item>225</item>
+        <item>226</item>
+        <item>227</item>
+        <item>228</item>
        <item>229</item>
+        <item>230</item>
+        <item>231</item>
+        <item>232</item>
+        <item>233</item>
        <item>234</item>
+        <item>235</item>
+        <item>236</item>
+        <item>237</item>
+        <item>238</item>
        <item>239</item>
+        <item>240</item>
+        <item>241</item>
+        <item>242</item>
+        <item>243</item>
        <item>244</item>
+        <item>245</item>
+        <item>246</item>
+        <item>247</item>
+        <item>248</item>
        <item>249</item>
+        <item>250</item>
+        <item>251</item>
+        <item>252</item>
+        <item>253</item>
+        <item>254</item>
        <item>255</item>
    </integer-array>

@@ -390,16 +685,16 @@

    <!-- Default screen brightness setting.
         Must be in the range specified by minimum and maximum. -->
-    <integer name="config_screenBrightnessSettingDefault">1072</integer>
+    <integer name="config_screenBrightnessSettingDefault">128</integer>

    <!-- Minimum screen brightness setting allowed by the power manager.
         The user is forbidden from setting the brightness below this level. -->
-    <integer name="config_screenBrightnessSettingMinimum">12</integer>
+    <integer name="config_screenBrightnessSettingMinimum">2</integer>

-    <integer name="config_screenBrightnessForVrSettingDefault">1376</integer>
-    <integer name="config_screenBrightnessForVrSettingMaximum">4095</integer>
-    <integer name="config_screenBrightnessForVrSettingMinimum">1264</integer>
-    <integer name="config_screenBrightnessSettingMaximum">4095</integer>
+    <integer name="config_screenBrightnessForVrSettingDefault">7</integer>
+    <integer name="config_screenBrightnessForVrSettingMaximum">7</integer>
+    <integer name="config_screenBrightnessForVrSettingMinimum">6</integer>
+    <integer name="config_screenBrightnessSettingMaximum">255</integer>

    <!-- Stability requirements in milliseconds for accepting a new brightness level.  This is used
         for debouncing the light sensor.  Different constants are used to debounce the light sensor
@@ -445,6 +740,12 @@
    <!-- How long it takes for the HW to start illuminating after the illumination is requested. -->
    <integer name="config_udfps_illumination_transition_ms">0</integer>

+    <!-- Type of the udfps long press sensor. Empty if long press is not supported. -->
+    <string name="config_dozeUdfpsLongPressSensorType" translatable="false">org.lineageos.sensor.udfps</string>
+
+    <!-- Whether to enable fp unlock when screen turns off on udfps devices -->
+    <bool name="config_screen_off_udfps_enabled">true</bool>
+
    <!-- The bounding path of the cutout region of the main built-in display.
         Must either be empty if there is no cutout region, or a string that is parsable by
         {@link android.util.PathParser}.
--- a/overlay-lineage/frameworks/base/core/res/res/values/dimens.xml
+++ b/overlay-lineage/frameworks/base/core/res/res/values/dimens.xml
--- a/overlay-lineage/frameworks/base/core/res/res/values/evolution_config.xml
+++ b/overlay-lineage/frameworks/base/core/res/res/values/evolution_config.xml
@@ -0,0 +1,41 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/**
+ * Copyright (c) 2009, The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+-->
+
+<!-- These resources are around just to allow their values to be customized
+     for different hardware and product builds.  Do not translate. -->
+
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- Whether devices suports in-display fingerprint when screen is off -->
+    <bool name="config_supportScreenOffUdfps">true</bool>
+
+    <!-- Pocket Lock -->
+    <bool name="config_pocketModeSupported">true</bool>
+
+    <!-- Path to fast charging status file to detect whether an oem fast charger is active -->
+    <string name="config_oemFastChargerStatusPath" translatable="false">/sys/class/power_supply/bms/fastcharge_mode</string>
+
+    <!-- Expected value from fast charging status file  -->
+    <string name="config_oemFastChargerStatusValue" translatable="false">1</string>
+
+    <!-- Defines the sysfs attribute path used by the device to enable/disable DC dimming. -->
+    <string name="config_deviceDcDimmingSysfsNode">/sys/devices/platform/soc/soc:qcom,dsi-display-primary/dimlayer_exposure</string>
+
+    <!-- Defines the value used by the device sysfs node to enable DC dimming -->
+    <string name="config_deviceDcDimmingEnableValue">1</string>
+</resources>
--- a/overlay-lineage/frameworks/base/core/res/res/values/strings.xml
+++ b/overlay-lineage/frameworks/base/core/res/res/values/strings.xml
@@ -1,7 +1,7 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!--
 /*
-** Copyright 2020, The LineageOS Project
+** Copyright 2017, The Android Open Source Project
 **
 ** Licensed under the Apache License, Version 2.0 (the "License");
 ** you may not use this file except in compliance with the License.
@@ -18,8 +18,8 @@
 -->

 <!-- These resources are around just to allow their values to be customized
-     for different hardware and product builds. -->
-<resources>
-    <!-- The radius of the enrollment progress bar, in dp -->
-    <integer name="config_udfpsEnrollProgressBar" translatable="false">104</integer>
+     for different hardware and product builds.  Do not translate. -->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- Do not translate. Default access point SSID used for tethering -->
+    <string name="wifi_tether_configure_ssid_default" translatable="false">Xiaomi Mi 10</string>
 </resources>
--- a/overlay-lineage/frameworks/base/core/res/res/xml/power_profile.xml
+++ b/overlay-lineage/frameworks/base/core/res/res/xml/power_profile.xml
--- a/overlay-lineage/frameworks/base/packages/SystemUI/res/values/config.xml
+++ b/overlay-lineage/frameworks/base/packages/SystemUI/res/values/config.xml
@@ -20,6 +20,34 @@
 <!-- These resources are around just to allow their values to be customized
     for different hardware and product builds. -->
 <resources>
-    <!-- Color of the UDFPS pressed view -->
-    <color name="config_udfpsColor">#ffffff</color>
+    <!-- Doze: does this device support STATE_DOZE?  -->
+    <bool name="doze_display_state_supported">true</bool>
+
+    <!-- Doze: check proximity sensor before pulsing? -->
+    <bool name="doze_proximity_check_before_pulse">false</bool>
+
+    <!-- Should we vibrate on an icon animation of the shelf. This should only be active if the
+     vibrator is capable of subtle vibrations -->
+    <bool name="config_vibrateOnIconAnimation">true</bool>
+
+    <!-- Default rounded corner curve (a Bezier). Must match (the curved path in) rounded.xml.
+         Note that while rounded.xml includes the entire path (including the horizontal and vertical
+         corner edges), this pulls out just the curve.
+     -->
+    <string name="config_rounded_mask" translatable="false">M 118.88 0.00 C 92.62 0.73 65.04 3.19 41.99 16.95 C 25.47 26.58 13.97 43.17 8.22 61.18 C 2.11 79.38 0.60 98.71 0.00 118.88</string>
+
+    <!-- Respect drawable/rounded.xml intrinsic size for multiple radius corner path customization -->
+    <bool name="config_roundedCornerMultipleRadius">true</bool>
+
+    <!--  Allow CornerHandleView and PathSpecCornerPathRenderer to decouple from corner-radius -->
+    <dimen name="config_rounded_mask_size">130px</dimen>
+    <dimen name="config_rounded_mask_size_top">120px</dimen>
+    <dimen name="config_rounded_mask_size_bottom">130px</dimen>
+
+    <!-- Location on the screen of the center of the physical power button. -->
+    <!-- <dimen name="physical_power_button_center_screen_location_y">900px</dimen> -->
+
+    <!-- Location on the screen of the center of the fingerprint sensor. -->
+    <!-- <dimen name="physical_fingerprint_sensor_center_screen_location_y">2006.5px</dimen> -->
+
 </resources>
--- a/overlay-lineage/frameworks/base/packages/SystemUI/res/values/dimens.xml
+++ b/overlay-lineage/frameworks/base/packages/SystemUI/res/values/dimens.xml
@@ -33,4 +33,7 @@

    <!-- Margin on the right side of the system icon group on Keyguard. -->
    <dimen name="system_icons_keyguard_padding_end">@dimen/status_bar_padding_end</dimen>
+
+    <!-- Recognizing fingerprint animation -->
+    <dimen name="udfps_animation_offset">4dp</dimen>
 </resources>
--- a/overlay-lineage/frameworks/base/packages/SystemUI/res/values/evolution_config.xml
+++ b/overlay-lineage/frameworks/base/packages/SystemUI/res/values/evolution_config.xml
@@ -0,0 +1,14 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2019-2024 The Evolution X Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<resources>
+
+    <!-- Udfps vendor code -->
+    <integer name="config_udfpsVendorCode">22</integer>
+
+    <!-- Update battery info every second when device is charging -->
+    <bool name="config_alternateFastchargeInfoUpdate">true</bool>
+
+</resources>
--- a/overlay-lineage/frameworks/base/packages/SystemUI/res/values/lineage_config.xml
+++ b/overlay-lineage/frameworks/base/packages/SystemUI/res/values/lineage_config.xml
@@ -0,0 +1,32 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2009, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<!-- These resources are around just to allow their values to be customized
+     for different hardware and product builds. -->
+<resources>
+    <!-- Color of the UDFPS pressed view -->
+    <color name="config_udfpsColor">#00ff00</color>
+
+    <!-- Whether usage of the proximity sensor during doze is supported -->
+    <bool name="doze_proximity_sensor_supported">false</bool>
+
+    <!-- If not zero, limits the internal screen recorder's framerate to the set value. -->
+    <integer name="config_screenRecorderMaxFramerate">60</integer>
+
+</resources>
--- a/overlay-lineage/packages/apps/Settings/res/values/config.xml
+++ b/overlay-lineage/packages/apps/Settings/res/values/config.xml
@@ -1,21 +1,44 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!-- Copyright (C) 2007 The Android Open Source Project
-
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
     You may obtain a copy of the License at
-
          http://www.apache.org/licenses/LICENSE-2.0
-
     Unless required by applicable law or agreed to in writing, software
     distributed under the License is distributed on an "AS IS" BASIS,
     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
     See the License for the specific language governing permissions and
     limitations under the License.
 -->
+<resources>
+    <!-- The number of vibration intensity levels supported by the device.
+         Note that this should correspond to the ability to vary the vibration amplitude, with
+         enough dynamic range to have at least as many distinct intensity levels as defined here.
+         Supported values are 1, 2, 3. If '1', the settings app will use a toggle for the settings,
+         otherwise a slider. If '3', the settings app maps intensities directly to the levels
+         supported by the Vibrator HAL APIs. If '2', then the levels will be mapped to
+         VIBRATION_INTENSITY_LOW and VIBRATION_INTENSITY_HIGH, which gives the most range for
+         scaling vibrations. The medium intensity will be skipped.
+         The default intensity values are configured at
+         frameworks/base/core/res/res/values/config.xml's config_default[type]VibrationIntensity.
+         Make sure that each default intensity value is consistent with the supported levels set
+         here. If this settings supports only 2 levels, for example, then the default intensity
+         should be either LOW (1) or HIGH (3).
+    -->
+    <integer name="config_vibration_supported_intensity_levels">3</integer>

-<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- Whether to show a preference item for mobile plan -->
+    <bool name="config_show_mobile_plan">false</bool>

-    <!-- Whether to show min refresh rate in display settings -->
-    <bool name="config_show_min_refresh_rate_switch">true</bool>
+    <!-- Whether to show the Preference for Adaptive connectivity -->
+    <bool name="config_show_adaptive_connectivity">false</bool>
+
+    <!-- Whether memory from app_info_settings is available or not. -->
+    <bool name="config_show_app_info_settings_memory">true</bool>
+
+    <!-- The radius of the enrollment progress bar, in dp -->
+    <integer name="config_udfpsEnrollProgressBar" translatable="false">104</integer>
+
+    <!-- Whether to display Cloned Apps page in Settings (Settings > Apps > Cloned Apps).-->
+    <bool name="config_cloned_apps_page_enabled">true</bool>
 </resources>
--- a/overlay-lineage/packages/apps/Settings/res/values/dimens.xml
+++ b/overlay-lineage/packages/apps/Settings/res/values/dimens.xml
@@ -0,0 +1,16 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2009 The Android Open Source Project
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+          http://www.apache.org/licenses/LICENSE-2.0
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<resources>
+    <item name="fingerprint_sensor_location_fraction_y" type="fraction">78%</item>
+</resources>
--- a/overlay-lineage/packages/apps/Settings/res/values/evolution_strings.xml
+++ b/overlay-lineage/packages/apps/Settings/res/values/evolution_strings.xml
@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2019-2021 The Evolution X Project
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+          http://www.apache.org/licenses/LICENSE-2.0
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+
+    <!-- About device screen, build maintainer -->
+    <string name="build_maintainer_summary">TechPanelGM</string>
+    <string name="build_maintainer_donate_url">https://buymeacoffee.com/techpanelgm</string>
+
+</resources>
+
--- a/overlay-lineage/packages/apps/Settings/res/values/lineage_config.xml
+++ b/overlay-lineage/packages/apps/Settings/res/values/lineage_config.xml
@@ -0,0 +1,67 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2020-2024 The LineageOS Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<resources>
+    <!-- Indicates whether device has a front facing fingerprint sensor (not udfps). -->
+    <bool name="config_is_front_facing_fps" translatable="false">false</bool>
+
+    <!-- Indicates whether device has a side mounted fingerprint sensor,
+         but a dedicated one, i.e. not embedded in the power button. -->
+    <bool name="config_is_side_fps" translatable="false">false</bool>
+
+    <string-array name="config_ignored_backup_transports" translatable="false">
+        <item>com.android.localtransport/.LocalTransport</item>
+    </string-array>
+
+    <!-- Whether to show advanced display rotation settings -->
+    <bool name="config_show_advanced_rotation_settings">true</bool>
+
+    <!-- Show battery information -->
+    <bool name="config_show_battery_info" translatable="false">true</bool>
+
+    <!-- Show battery cycle count -->
+    <bool name="config_show_battery_cycle_count" translatable="false">true</bool>
+
+    <!-- Show battery Design Capacity -->
+    <bool name="config_show_battery_design_capacity">true</bool>
+
+    <!-- Show battery Maximum Capacity -->
+    <bool name="config_show_battery_maximum_capacity">true</bool>
+
+    <!-- Whether to show peak refresh rate in display settings -->
+    <bool name="config_show_peak_refresh_rate_switch">false</bool>
+
+    <!-- Whether to show min refresh rate in display settings -->
+    <bool name="config_show_min_refresh_rate_switch">true</bool>
+
+    <!-- Max network scan search time in seconds -->
+    <integer name="config_network_scan_helper_max_search_time_sec">300</integer>
+
+    <!-- Whether to show custom screen resolution settings -->
+    <bool name="config_show_custom_screen_resolution_switch">false</bool>
+
+    <!-- Whether to show double tap ambient settings -->
+    <bool name="config_supports_double_tap_ambient" translatable="false">false</bool>
+
+    <!-- Whether to show volume steps settings -->
+    <bool name="config_supports_volume_steps" translatable="false">true</bool>
+
+    <!-- Whether to show vendor security patch level -->
+    <bool name="config_show_vendor_patch_level" translatable="false">true</bool>
+    
+    <!-- Battery Info: mAh -->
+    <integer name="config_battery_divider" translatable="false">1000</integer>
+</resources>
--- a/proprietary-files.txt
+++ b/proprietary-files.txt
@@ -1,4 +1,4 @@
-# Unpinned blobs from umi-user 13 RKQ1.211001.001 V14.0.5.0.TJBMIXM release-keys
+# Unpinned blobs from umi-user 13 TKQ1.221114.001 V816.0.3.0.TJBMIXM release-keys

 # ACDB
 vendor/etc/acdbdata/Tutu/Tutu_Bluetooth_cal.acdb
@@ -131,14 +131,14 @@ vendor/lib64/com.qti.feature2.softispsupernight.so
 vendor/lib64/com.qti.feature2.sr.so
 vendor/lib64/com.qti.feature2.stub.so
 vendor/lib64/com.qti.feature2.swmf.so
-vendor/lib64/libMIAIHDRhvx_interface.so;DISABLE_CHECKELF
+vendor/lib64/libMIAIHDRhvx_interface.so
 vendor/lib64/libSNPE.so
-vendor/lib64/libalAILDC.so;DISABLE_CHECKELF
-vendor/lib64/libalLDC.so;DISABLE_CHECKELF
-vendor/lib64/libalhLDC.so;DISABLE_CHECKELF
+vendor/lib64/libalAILDC.so
+vendor/lib64/libalCFR.so
+vendor/lib64/libalLDC.so
+vendor/lib64/libalhLDC.so
 vendor/lib64/libarcdualcamsat.so
 vendor/lib64/libarcmulticamsat.so
-vendor/lib64/libarcsat.so
 vendor/lib64/libarcsoft_beautyshot.so
 vendor/lib64/libarcsoft_bodyslim.so
 vendor/lib64/libarcsoft_distortion_correction.so
@@ -147,12 +147,12 @@ vendor/lib64/libarcsoft_dualcam_refocus_front.so
 vendor/lib64/libarcsoft_dualcam_refocus_rear_t.so
 vendor/lib64/libarcsoft_dualcam_refocus_rear_w.so
 vendor/lib64/libarcsoft_hdr_detection.so
-vendor/lib64/libarcsoft_hdrplus_hvx_stub.so;DISABLE_CHECKELF
+vendor/lib64/libarcsoft_hdrplus_hvx_stub.so
 vendor/lib64/libarcsoft_high_dynamic_range.so
 vendor/lib64/libarcsoft_portrait_lighting.so
 vendor/lib64/libarcsoft_portrait_lighting_c.so
 vendor/lib64/libarcsoft_preview_deflicker.so
-vendor/lib64/libarcsoft_super_night_raw.so;DISABLE_CHECKELF
+vendor/lib64/libarcsoft_super_night_raw.so
 vendor/lib64/libarcsoft_superportrait.so
 vendor/lib64/libc++_shared.so
 vendor/lib64/libcamera_dirty.so
@@ -171,11 +171,15 @@ vendor/lib64/libdualcam_video_optical_zoom.so
 vendor/lib64/libflaw.so
 vendor/lib64/libfocus.so
 vendor/lib64/libft2vendor.so
+vendor/lib64/libHalSuperSensorServer.so
 vendor/lib64/libhta.so
 vendor/lib64/libipebpsstriping.so
+vendor/lib64/libmiai_deblur.so
+vendor/lib64/libmialgoengine.so
+vendor/lib64/libmialgo_ie_capture.so
 vendor/lib64/libmialgo_ie_preview.so
 vendor/lib64/libmialgo_image_colourkeeping.so
-vendor/lib64/libmialgo_rfs.so;DISABLE_CHECKELF
+vendor/lib64/libmialgo_rfs.so
 vendor/lib64/libmialgo_sd.so
 vendor/lib64/libmialgo_utils.so
 vendor/lib64/libmialgo_video_colourkeeping.so
@@ -190,6 +194,7 @@ vendor/lib64/libmulticam_video_optical_zoom.so
 vendor/lib64/libnpu.so
 vendor/lib64/libofflinelog.so
 vendor/lib64/libos.so
+vendor/lib64/librelight_only.so
 vendor/lib64/libremosaic_wrapper.so
 vendor/lib64/libremosaichvx_stub.so
 vendor/lib64/libremosaiclib.so
@@ -201,6 +206,8 @@ vendor/lib64/libsnpe_dsp_domains_v2_system.so
 vendor/lib64/libsns_registry_skel.so
 vendor/lib64/libst_soft_isp_calc_exposure_shared.so
 vendor/lib64/libst_soft_isp_shared.so
+vendor/lib64/libSuperSensor.so
+vendor/lib64/libSuperSensorCPU.so
 vendor/lib64/libsymphony-cpu.so
 vendor/lib64/libsynx.so
 vendor/lib64/libthreadutils.so
@@ -373,8 +380,8 @@ vendor/lib64/hw/fingerprint.goodix_fod.so:vendor/lib64/hw/fingerprint.goodix_fod
 vendor/lib64/libgf_hal.so

 # HotwordEnrollment
-product/priv-app/HotwordEnrollmentOKGoogleHEXAGON_WIDEBAND/HotwordEnrollmentOKGoogleHEXAGON_WIDEBAND.apk
-product/priv-app/HotwordEnrollmentXGoogleHEXAGON_WIDEBAND/HotwordEnrollmentXGoogleHEXAGON_WIDEBAND.apk
+product/priv-app/HotwordEnrollmentOKGoogleHEXAGON_WIDEBAND/HotwordEnrollmentOKGoogleHEXAGON_WIDEBAND.apk
+product/priv-app/HotwordEnrollmentXGoogleHEXAGON_WIDEBAND/HotwordEnrollmentXGoogleHEXAGON_WIDEBAND.apk
 system_ext/etc/permissions/com.android.hotwordenrollment.common.util.xml
 system_ext/framework/com.android.hotwordenrollment.common.util.jar

@@ -408,7 +415,6 @@ vendor/etc/init/init.vendor.sensors.rc
 vendor/etc/init/vendor.qti.hardware.sensorscalibrate@1.0-service.rc
 vendor/etc/init/vendor.sensors.qti.rc
 vendor/etc/init/vendor.sensors.sscrpcd.rc
-vendor/etc/sensors/hals.conf
 vendor/lib64/hw/vendor.qti.hardware.sensorscalibrate@1.0-impl.so
 vendor/lib64/libnotifyaudiohal.so
 vendor/lib64/libsensorcal.so
--- a/rootdir/etc/init.device.rc
+++ b/rootdir/etc/init.device.rc
@@ -1,3 +1,10 @@
 # PowerShare
 on boot
-    chown system system /sys/devices/platform/soc/c440000.qcom,spmi/spmi-0/spmi0-02/c440000.qcom,spmi:qcom,pm8150b@2:qcom,qpnp-smb5/power_supply/wireless/reverse_chg_mode
+    chown system system /sys/class/power_supply/wireless/reverse_chg_mode
+
+# UDFPS
+on property:ro.boot.hwlevel=P0.1
+    setprop persist.vendor.fingerprint.sensor_location 549|1925|99
+
+on property:ro.boot.hwlevel=P1
+    setprop persist.vendor.fingerprint.sensor_location 549|1925|99
--- a/rro_overlays/xiaomi_umi_hwlevel_default_overlay/Android.bp
+++ b/rro_overlays/xiaomi_umi_hwlevel_default_overlay/Android.bp
@@ -1,5 +0,0 @@
-runtime_resource_overlay {
-    name: "xiaomi_umi_hwlevel_default_overlay",
-    sdk_version: "current",
-    vendor: true
-}
--- a/rro_overlays/xiaomi_umi_hwlevel_default_overlay/AndroidManifest.xml
+++ b/rro_overlays/xiaomi_umi_hwlevel_default_overlay/AndroidManifest.xml
@@ -1,10 +0,0 @@
-<manifest xmlns:android="http://schemas.android.com/apk/res/android"
-    package="org.xiaomi_sm8250.umi.overlay.hwlevel_default"
-    android:versionCode="1"
-    android:versionName="1.0">
-    <application android:hasCode="false" />
-    <overlay
-      android:targetPackage="android"
-      android:isStatic="true"
-      android:priority="1"/>
-</manifest>
--- a/rro_overlays/xiaomi_umi_hwlevel_default_overlay/res/values/config.xml
+++ b/rro_overlays/xiaomi_umi_hwlevel_default_overlay/res/values/config.xml
@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-    Copyright (C) 2017 The LineageOS Project
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-->
-
-<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
-    <!-- The properties of a UDFPS sensor in pixels, in the order listed below: -->
-    <integer-array name="config_udfps_sensor_props" translatable="false" >
-      <!--
-        <item>sensorLocationX</item>
-        <item>sensorLocationY</item>
-        <item>sensorRadius</item>
-      -->
-        <item>540</item>
-        <item>1907</item>
-        <item>99</item>
-    </integer-array>
-</resources>
--- a/rro_overlays/xiaomi_umi_hwlevel_p01_overlay/Android.bp
+++ b/rro_overlays/xiaomi_umi_hwlevel_p01_overlay/Android.bp
@@ -1,5 +0,0 @@
-runtime_resource_overlay {
-    name: "xiaomi_umi_hwlevel_p01_overlay",
-    sdk_version: "current",
-    vendor: true
-}
--- a/rro_overlays/xiaomi_umi_hwlevel_p01_overlay/AndroidManifest.xml
+++ b/rro_overlays/xiaomi_umi_hwlevel_p01_overlay/AndroidManifest.xml
@@ -1,12 +0,0 @@
-<manifest xmlns:android="http://schemas.android.com/apk/res/android"
-    package="org.xiaomi_sm8250.umi.overlay.hwlevel_p01"
-    android:versionCode="1"
-    android:versionName="1.0">
-    <application android:hasCode="false" />
-    <overlay
-      android:requiredSystemPropertyName="ro.boot.hwlevel"
-      android:requiredSystemPropertyValue="P0.1"
-      android:targetPackage="android"
-      android:isStatic="true"
-      android:priority="2"/>
-</manifest>
--- a/rro_overlays/xiaomi_umi_hwlevel_p01_overlay/res/values/config.xml
+++ b/rro_overlays/xiaomi_umi_hwlevel_p01_overlay/res/values/config.xml
@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-    Copyright (C) 2017 The LineageOS Project
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-->
-
-<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
-    <!-- The properties of a UDFPS sensor in pixels, in the order listed below: -->
-    <integer-array name="config_udfps_sensor_props" translatable="false" >
-      <!--
-        <item>sensorLocationX</item>
-        <item>sensorLocationY</item>
-        <item>sensorRadius</item>
-      -->
-        <item>549</item>
-        <item>1925</item>
-        <item>99</item>
-    </integer-array>
-</resources>
--- a/rro_overlays/xiaomi_umi_hwlevel_p1_overlay/Android.bp
+++ b/rro_overlays/xiaomi_umi_hwlevel_p1_overlay/Android.bp
@@ -1,5 +0,0 @@
-runtime_resource_overlay {
-    name: "xiaomi_umi_hwlevel_p1_overlay",
-    sdk_version: "current",
-    vendor: true
-}
--- a/rro_overlays/xiaomi_umi_hwlevel_p1_overlay/AndroidManifest.xml
+++ b/rro_overlays/xiaomi_umi_hwlevel_p1_overlay/AndroidManifest.xml
@@ -1,12 +0,0 @@
-<manifest xmlns:android="http://schemas.android.com/apk/res/android"
-    package="org.xiaomi_sm8250.umi.overlay.hwlevel_p1"
-    android:versionCode="1"
-    android:versionName="1.0">
-    <application android:hasCode="false" />
-    <overlay
-      android:requiredSystemPropertyName="ro.boot.hwlevel"
-      android:requiredSystemPropertyValue="P1"
-      android:targetPackage="android"
-      android:isStatic="true"
-      android:priority="2"/>
-</manifest>
--- a/rro_overlays/xiaomi_umi_hwlevel_p1_overlay/res/values/config.xml
+++ b/rro_overlays/xiaomi_umi_hwlevel_p1_overlay/res/values/config.xml
@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-    Copyright (C) 2017 The LineageOS Project
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-->
-
-<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
-    <!-- The properties of a UDFPS sensor in pixels, in the order listed below: -->
-    <integer-array name="config_udfps_sensor_props" translatable="false" >
-      <!--
-        <item>sensorLocationX</item>
-        <item>sensorLocationY</item>
-        <item>sensorRadius</item>
-      -->
-        <item>549</item>
-        <item>1925</item>
-        <item>99</item>
-    </integer-array>
-</resources>
--- a/sepolicy/vendor/system_server.te
+++ b/sepolicy/vendor/system_server.te
@@ -1 +0,0 @@
-get_prop(system_server, bootloader_prop)
--- a/sepolicy/vendor/zygote.te
+++ b/sepolicy/vendor/zygote.te
@@ -1 +0,0 @@
-get_prop(zygote, bootloader_prop)
--- a/setup-makefiles.py
+++ b/setup-makefiles.py
@@ -0,0 +1 @@
+#!./extract-files.py --regenerate_makefiles
--- a/setup-makefiles.sh
+++ b/setup-makefiles.sh
@@ -1,29 +0,0 @@
-#!/bin/bash
-#
-# SPDX-FileCopyrightText: 2016 The CyanogenMod Project
-# SPDX-FileCopyrightText: 2017-2024 The LineageOS Project
-# SPDX-License-Identifier: Apache-2.0
-#
-
-function vendor_imports() {
-    cat <<EOF >>"$1"
-		"hardware/qcom-caf/common/libqti-perfd-client",
-		"hardware/xiaomi",
-		"vendor/qcom/opensource/display",
-EOF
-}
-
-# If we're being sourced by the common script that we called,
-# stop right here. No need to go down the rabbit hole.
-if [ "${BASH_SOURCE[0]}" != "${0}" ]; then
-    return
-fi
-
-set -e
-
-export DEVICE=umi
-export DEVICE_COMMON=sm8250-common
-export VENDOR=xiaomi
-export VENDOR_COMMON=${VENDOR}
-
-"./../../${VENDOR_COMMON}/${DEVICE_COMMON}/setup-makefiles.sh" "$@"
--- a/vendor.prop
+++ b/vendor.prop
@@ -33,3 +33,8 @@ ro.hardware.audio.primary=umi
 # Display
 ro.surface_flinger.set_touch_timer_ms=200
 vendor.display.defer_fps_frame_count=2
+
+# Fingerprint
+persist.vendor.fingerprint.sensor_location=540|1907|99
+persist.vendor.fingerprint.type=udfps_optical
+persist.vendor.fingerprint.udfps.control_illumination=true
Author	SHA1	Message	Date
TechPanelGM	cfe430317c	umi: overlay-lineage: Enable screen-off UDFPS support	2025-11-27 10:15:47 +00:00
TechPanelGM	5c903beffe	umi: Welcome Evolution X	2025-11-17 20:12:26 +00:00
TechPanelGM	df8a25e71e	umi: Spoof BuildFingerprint as Pixel Beta * It is necessary to pass integrity with the built-in Keybox Importer, as our stock fingerprint is not Valid	2025-11-17 20:12:26 +00:00
TechPanelGM	80bd1711b6	umi: Add namespace for missing module needed by libmialgoengine.so Module "libmialgoengine" is defined in namespace "vendor/xiaomi/umi" which can read these 6 namespaces: ["vendor/xiaomi/umi" "hardware/qcom-caf/common/libqti-perfd-client" "hardware/xiaomi" "vendor/qcom/opensource/display" "vendor/xiaomi/sm8250-common" "."] Module "libgrallocutils" can be found in these namespaces: ["hardware/qcom-caf/msm8996" "hardware/qcom-caf/msm8998" "hardware/qcom-caf/sdm845" "hardware/qcom-caf/sm8150" "hardware/qcom-caf/s m8250" "hardware/qcom-caf/sm8350" "hardware/qcom-caf/sm8450" "hardware/qcom-caf/sm8550" "hardware/qcom-caf/sm8650" "hardware/qcom-caf/sm8750" "hardware/qcom/sdm845" "hardware/qcom/sm7250/dis play" "hardware/qcom/sm8150/display"]	2025-11-17 15:15:53 +00:00
TechPanelGM	d65a74d215	umi: Move/Add missing files for MiuiCamera - Move common files to MiuiCamera Package - vendor/lib64/libarcsat.so is a common file and already included in device/xiaomi/camera	2025-11-17 15:15:53 +00:00
TechPanelGM	8be10dc365	umi: Add MiuiCamera Package	2025-11-17 15:15:53 +00:00
TechPanelGM	f619f5fa22	umi: Move buildflags > lineage_umi.mk	2025-11-17 15:15:53 +00:00
TechPanelGM	b8bb50c373	umi: Drop specific kernel config	2025-11-17 15:15:53 +00:00
TechPanelGM	5dd086e59f	umi: Inherit Overlay Configuration from UDC tree	2025-11-17 15:15:53 +00:00
TechPanelGM	c6a9457327	umi: switch to device extract only	2025-11-17 15:15:53 +00:00
TechPanelGM	600c0fb4c6	umi: Update fingerprints to V816.0.3.0.TJBMIXM Global	2025-11-17 15:15:53 +00:00
johnmart19	98b1cfb987	umi: Patch audio library for VNDK 34 VNDK 36 crashing: Revision: '0' ABI: 'arm' Timestamp: 2025-06-19 09:37:19.685329738+0300 Process uptime: 0s Cmdline: /vendor/bin/hw/android.hardware.audio.service pid: 1093, tid: 1180, name: HwBinder:1093_2 >>> /vendor/bin/hw/android.hardware.audio.service <<< uid: 1041 signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr 0x00000040 Cause: null pointer dereference r0 00000000 r1 f3cc0730 r2 00000003 r3 00000003 r4 f418f780 r5 00000024 r6 00000001 r7 00000000 r8 f3aacbf4 r9 f3f8600c r10 f418f780 r11 f418f780 ip f2166a38 sp f27ff4f8 lr f216409f pc f2133588 Requires Evolution-X/hardware_lineage_compat@51c1ec2 to work	2025-11-17 15:15:53 +00:00
Demon000	afe8ea17c8	umi: Support UDFPS on AoD	2025-11-17 15:15:48 +00:00
Sebastiano Barezzi	d823fe125a	umi: Move to the new libinit implementation Change-Id: I4207a94ff62f0c515c91e186f0ace348c6db7b1d	2025-10-28 02:15:25 +01:00
Yumi Yukimura	88f247c37c	[TMP] let's unbreak our device-specific libinit for now Change-Id: Id9963f67f226126a3102b6bfd1080221acac1b03	2025-08-13 13:17:39 +08:00
Flicker372	0c0af3ae2e	umi: Use simpler powershare path * Fix SystemUI crash * Soong function can't accept "," Co-authored-by: Alcatraz323 <alcatraz32323@gmail.com> Change-Id: I16f9ec2094575b63f77556f6a12d69428bb29e37	2025-07-14 02:41:36 +08:00
Bruno Martins	4e271e6089	umi: Set vendor init lib via soong config Change-Id: I8f7e6b987bee58dbf09ca9ad7cfd5a7e99e19c3b	2025-05-10 18:34:48 +00:00
Yumi Yukimura	6ce87e3969	umi: Drop `TARGET_RECOVERY_DEVICE_MODULES` * It's deprecated on 15 QPR2 * Building a library as module doesn't get it executed? and libinit still does its job in recovery mode without migrating this Change-Id: I7be000356fe7d7bd099615d334892d1686bece0e	2025-05-10 18:34:48 +00:00
Michael Bestas	337cd451ff	umi: Migrate powershare to soong_config_set Change-Id: I2489e8d95d968556a854d7b8314f098d37c382b7	2025-05-01 11:18:31 +01:00
Bruno Martins	cda320a0f4	umi: Switch to PowerShare AIDL Change-Id: I97400638493a3b9d5a3b87fa6831c9affc7c3def	2025-04-26 14:54:31 +01:00
LuK1337	e49c657396	umi: Enable elfchecks for camera libs Reference: I23190f0b83c9e28aa2624a7575544b0eaf5c83c8 Change-Id: I18b0b07bf3a435dd449106653e3ca458b4f07b69	2025-04-04 22:00:11 +02:00
LuK1337	2209102dcf	umi: Switch to py extract utils Change-Id: Ia13b728464495ff208ca1a706847b11af5c93ae8	2025-04-04 21:27:46 +02:00
Michael Bestas	bf7cbe860e	umi: Automatically add apk/jar/vintf fragments to PRODUCT_PACKAGES Change-Id: Iaa9d66b0bbdc55f046ee1347cbf83c7eecebb35e	2025-04-03 02:01:52 +02:00
basamaryan	7eb3817a89	umi: Move to Xiaomi fingerprint AIDL Change-Id: I68dba7184034fd37454c7d32a065f041cb611625	2025-01-23 23:36:04 +01:00
Beverly	1850e177bc	umi: overlay: Update pixel pitch Bug: 319894241 Flag: ACONFIG com.android.systemui.device_entry_udfps_refactor DEVELOPMENT Test: manual Change-Id: Iaa9576cb95ebe73043b7030b2b176f67bc90e3a1	2025-01-23 23:36:03 +01:00
LuK1337	0cc9f00781	umi: Adjust override prop key names Change-Id: I436bbf425023dbe54cf3e2c35f50a5575511bc38	2025-01-16 00:18:56 +01:00
				`@@ -0,0 +1 @@`
				`#!./extract-files.py --regenerate_makefiles`