Evolution-X-Devices/kernel_oneplus_8750-devicetrees
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ARM: dts: msm: Add PMIC Overlay support for sm6150

Browse Source 
Add snapshot for
	pm6150.dtsi
	qg-batterydata-alium-3600mah.dtsi
	qg-batterydata-mlp356477-2800mah.dtsi
	sm6150-pmic-overlay.dtsi
	smb1390.dtsi

files from msm-5.4 branch commit
84b7709e955d ("ARM: dts: qcom: Removed bluetooth header file").

While at it, update the 'io-channels' property of pm6150_adc_tm and
pm6150l_adc_tm thermistor nodes in sm6150-pmic-overlay.dtsi,
Remove pm6150_revid node and its reference from pm6150.dtsi and
modify pm6150_adc_tm nodes to suit qcom-spmi-adc-tm5 thermal driver
in pm6150.dtsi and updated Power on node in pm6150.dtsi to use the
upstream driver.

Change-Id: Icc0a1d01447e2a316625ae975f99429500c3de04
Signed-off-by: Monish Chunara <quic_mchunara@quicinc.com>
This commit is contained in:
Monish Chunara
2025-03-20 18:26:56 +05:30
committed by Aryan Modi
parent fafb874fba
commit 953a631bcb
11 changed files with 3517 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

628
qcom/pm6150.dtsi Normal file
View File

@@ -0,0 +1,628 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/input/qcom,qpnp-power-on.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/iio/qti_power_supply_iio.h>
&spmi_bus {
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
qcom,pm6150@0 {
compatible = "qcom,spmi-pmic";
reg = <0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm6150_pon: pon@800 {
compatible = "qcom,pm8998-pon";
reg = <0x800>;
mode-bootloader = <0x2>;
mode-recovery = <0x1>;
pm6150_pwrkey: pwrkey {
compatible = "qcom,pm8941-pwrkey";
interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_POWER>;
};
pm6150_resin: resin {
compatible = "qcom,pm8941-resin";
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_VOLUMEUP>;
status = "okay";
};
};
pm6150_vadc: vadc@3100 {
compatible = "qcom,spmi-adc5";
reg = <0x3100>, <0x3700>;
reg-names = "adc5-usr-base", "adc5-cal-base";
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "eoc-int-en-set";
#io-channel-cells = <1>;
io-channel-ranges;
/* Channel nodes */
ref_gnd {
reg = <ADC5_REF_GND>;
label = "ref_gnd";
qcom,pre-scaling = <1 1>;
};
vref_1p25 {
reg = <ADC5_1P25VREF>;
label = "vref_1p25";
qcom,pre-scaling = <1 1>;
};
die_temp {
reg = <ADC5_DIE_TEMP>;
label = "die_temp";
qcom,pre-scaling = <1 1>;
};
vph_pwr {
reg = <ADC5_VPH_PWR>;
label = "vph_pwr";
qcom,pre-scaling = <1 3>;
};
vbat_sns {
reg = <ADC5_VBAT_SNS>;
label = "vbat_sns";
qcom,pre-scaling = <1 3>;
};
usb_in_i_uv {
reg = <ADC5_USB_IN_I>;
label = "usb_in_i_uv";
qcom,pre-scaling = <1 1>;
};
usb_in_v_div_16 {
reg = <ADC5_USB_IN_V_16>;
label = "usb_in_v_div_16";
qcom,pre-scaling = <1 16>;
};
chg_temp {
reg = <ADC5_CHG_TEMP>;
label = "chg_temp";
qcom,pre-scaling = <1 1>;
};
bat_therm {
reg = <ADC5_BAT_THERM_100K_PU>;
label = "bat_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
bat_therm_30k {
reg = <ADC5_BAT_THERM_30K_PU>;
label = "bat_therm_30k";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
bat_therm_400k {
reg = <ADC5_BAT_THERM_400K_PU>;
label = "bat_therm_400k";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
bat_id {
reg = <ADC5_BAT_ID_100K_PU>;
label = "bat_id";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
xo_therm {
reg = <ADC5_XO_THERM_100K_PU>;
label = "xo_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
chg_sbux {
reg = <ADC5_SBUx>;
label = "chg_sbux";
qcom,pre-scaling = <1 3>;
};
mid_chg_div6 {
reg = <ADC5_MID_CHG_DIV6>;
label = "chg_mid";
qcom,pre-scaling = <1 6>;
};
};
pm6150_adc_tm: adc_tm@3500 {
compatible = "qcom,spmi-adc-tm5";
reg = <0x3500>;
interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
#thermal-sensor-cells = <1>;
};
pm6150_charger: qcom,qpnp-smb5 {
compatible = "qcom,pm6150-smb5";
#address-cells = <1>;
#size-cells = <0>;
#cooling-cells = <2>;
qcom,chgr@1000 {
reg = <0x1000>;
interrupts =
<0x0 0x10 0x0 IRQ_TYPE_EDGE_RISING>,
<0x0 0x10 0x1 IRQ_TYPE_EDGE_RISING>,
<0x0 0x10 0x2 IRQ_TYPE_EDGE_RISING>,
<0x0 0x10 0x3 IRQ_TYPE_EDGE_RISING>,
<0x0 0x10 0x4 IRQ_TYPE_EDGE_RISING>,
<0x0 0x10 0x5 IRQ_TYPE_EDGE_RISING>,
<0x0 0x10 0x6 IRQ_TYPE_EDGE_RISING>,
<0x0 0x10 0x7 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "chgr-error",
"chg-state-change",
"step-chg-state-change",
"step-chg-soc-update-fail",
"step-chg-soc-update-req",
"fg-fvcal-qualified",
"vph-alarm",
"vph-drop-prechg";
};
qcom,dcdc@1100 {
reg = <0x1100>;
interrupts =
<0x0 0x11 0x0 IRQ_TYPE_EDGE_RISING>,
<0x0 0x11 0x1 IRQ_TYPE_EDGE_RISING>,
<0x0 0x11 0x2 IRQ_TYPE_EDGE_RISING>,
<0x0 0x11 0x3 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x11 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x11 0x5 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x11 0x6 IRQ_TYPE_EDGE_RISING>,
<0x0 0x11 0x7 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "otg-fail",
"otg-oc-disable-sw",
"otg-oc-hiccup",
"bsm-active",
"high-duty-cycle",
"input-current-limiting",
"concurrent-mode-disable",
"switcher-power-ok";
};
qcom,batif@1200 {
reg = <0x1200>;
interrupts =
<0x0 0x12 0x0 IRQ_TYPE_EDGE_RISING>,
<0x0 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x12 0x3 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x12 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x12 0x5 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x12 0x6 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x12 0x7 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "bat-temp",
"bat-ov",
"bat-low",
"bat-therm-or-id-missing",
"bat-terminal-missing",
"buck-oc",
"vph-ov";
};
qcom,usb@1300 {
reg = <0x1300>;
interrupts =
<0x0 0x13 0x0 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x13 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x13 0x2 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x13 0x3 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x13 0x5 IRQ_TYPE_EDGE_RISING>,
<0x0 0x13 0x6 IRQ_TYPE_EDGE_RISING>,
<0x0 0x13 0x7 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "usbin-collapse",
"usbin-vashdn",
"usbin-uv",
"usbin-ov",
"usbin-plugin",
"usbin-revi-change",
"usbin-src-change",
"usbin-icl-change";
};
qcom,dc@1400 {
reg = <0x1400>;
interrupts =
<0x0 0x14 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x14 0x2 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x14 0x3 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x14 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x14 0x5 IRQ_TYPE_EDGE_RISING>,
<0x0 0x14 0x6 IRQ_TYPE_EDGE_RISING>,
<0x0 0x14 0x7 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "dcin-vashdn",
"dcin-uv",
"dcin-ov",
"dcin-plugin",
"dcin-revi",
"dcin-pon",
"dcin-en";
};
qcom,typec@1500 {
reg = <0x1500>;
interrupts =
<0x0 0x15 0x0 IRQ_TYPE_EDGE_RISING>,
<0x0 0x15 0x1 IRQ_TYPE_EDGE_RISING>,
<0x0 0x15 0x2 IRQ_TYPE_EDGE_RISING>,
<0x0 0x15 0x3 IRQ_TYPE_EDGE_RISING>,
<0x0 0x15 0x4 IRQ_TYPE_EDGE_RISING>,
<0x0 0x15 0x5 IRQ_TYPE_EDGE_RISING>,
<0x0 0x15 0x6 IRQ_TYPE_EDGE_RISING>,
<0x0 0x15 0x7 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "typec-or-rid-detect-change",
"typec-vpd-detect",
"typec-cc-state-change",
"typec-vconn-oc",
"typec-vbus-change",
"typec-attach-detach",
"typec-legacy-cable-detect",
"typec-try-snk-src-detect";
};
qcom,misc@1600 {
reg = <0x1600>;
interrupts =
<0x0 0x16 0x0 IRQ_TYPE_EDGE_RISING>,
<0x0 0x16 0x1 IRQ_TYPE_EDGE_RISING>,
<0x0 0x16 0x2 IRQ_TYPE_EDGE_RISING>,
<0x0 0x16 0x3 IRQ_TYPE_EDGE_RISING>,
<0x0 0x16 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x16 0x5 IRQ_TYPE_EDGE_RISING>,
<0x0 0x16 0x6 IRQ_TYPE_EDGE_RISING>,
<0x0 0x16 0x7 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog-snarl",
"wdog-bark",
"aicl-fail",
"aicl-done",
"smb-en",
"imp-trigger",
"temp-change",
"temp-change-smb";
};
qcom,sdam@b100 {
reg = <0xb100>;
interrupts =
<0x0 0xb1 0x1 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "sdam-sts";
};
smb5_vbus: qcom,smb5-vbus {
regulator-name = "smb5-vbus";
};
smb5_vconn: qcom,smb5-vconn {
regulator-name = "smb5-vconn";
};
};
pm6150_pdphy: qcom,usb-pdphy@1700 {
compatible = "qcom,qpnp-pdphy";
reg = <0x1700 0x100>;
vdd-pdphy-supply = <&pm6150_l17>;
vbus-supply = <&smb5_vbus>;
vconn-supply = <&smb5_vconn>;
interrupts = <0x0 0x17 0x0 IRQ_TYPE_EDGE_RISING>,
<0x0 0x17 0x1 IRQ_TYPE_EDGE_RISING>,
<0x0 0x17 0x2 IRQ_TYPE_EDGE_RISING>,
<0x0 0x17 0x3 IRQ_TYPE_EDGE_RISING>,
<0x0 0x17 0x4 IRQ_TYPE_EDGE_RISING>,
<0x0 0x17 0x5 IRQ_TYPE_EDGE_RISING>,
<0x0 0x17 0x6 IRQ_TYPE_EDGE_RISING>,
<0x0 0x17 0x7 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "sig-tx",
"sig-rx",
"msg-tx",
"msg-rx",
"msg-tx-failed",
"msg-tx-discarded",
"msg-rx-discarded",
"fr-swap";
qcom,default-sink-caps = <5000 3000>, /* 5V @ 3A */
<9000 3000>, /* 9V @ 3A */
<12000 2250>; /* 12V @ 2.25A */
};
pm6150_qg: qpnp,qg {
compatible = "qcom,pm6150-qg";
depends-on-supply = <&pm6150_vadc>;
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
qcom,vbatt-cutoff-mv = <3200>;
qcom,vbatt-low-mv = <3300>;
qcom,vbatt-low-cold-mv = <3700>;
qcom,vbatt-empty-mv = <3000>;
qcom,vbatt-empty-cold-mv = <3000>;
qcom,s3-entry-fifo-length = <2>;
io-channels = <&pm6150_vadc ADC5_BAT_THERM_100K_PU>,
<&pm6150_vadc ADC5_BAT_ID_100K_PU>,
<&pm6150_charger PSY_IIO_INPUT_CURRENT_LIMITED>,
<&pm6150_charger PSY_IIO_RECHARGE_SOC>,
<&pm6150_charger PSY_IIO_FORCE_RECHARGE>,
<&pm6150_charger PSY_IIO_CHARGE_DONE>;
io-channel-names = "batt-therm",
"batt-id",
"input_current_limited",
"recharge_soc",
"force_recharge",
"charge_done";
qcom,qgauge@4800 {
status = "okay";
reg = <0x4800>;
interrupts =
<0x0 0x48 0x0 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x48 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x48 0x2 IRQ_TYPE_EDGE_RISING>,
<0x0 0x48 0x3 IRQ_TYPE_EDGE_RISING>,
<0x0 0x48 0x4 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "qg-batt-missing",
"qg-vbat-low",
"qg-vbat-empty",
"qg-fifo-done",
"qg-good-ocv";
};
qcom,qg-sdam@b600 {
status = "okay";
reg = <0xb600>;
};
};
pm6150_bcl: bcl@1d00 {
compatible = "qcom,bcl-v5";
reg = <0x1d00>;
interrupts = <0x0 0x1d 0x0 IRQ_TYPE_NONE>,
<0x0 0x1d 0x1 IRQ_TYPE_NONE>,
<0x0 0x1d 0x2 IRQ_TYPE_NONE>;
interrupt-names = "bcl-lvl0",
"bcl-lvl1",
"bcl-lvl2";
#thermal-sensor-cells = <1>;
};
bcl_soc:bcl-soc {
compatible = "qcom,msm-bcl-soc";
#thermal-sensor-cells = <0>;
};
pm6150_tz: qcom,temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>;
interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
#thermal-sensor-cells = <0>;
qcom,temperature-threshold-set = <1>;
};
pm6150_clkdiv: clock-controller@5b00 {
compatible = "qcom,spmi-clkdiv";
reg = <0x5b00>;
#clock-cells = <1>;
qcom,num-clkdivs = <1>;
clock-output-names = "pm6150_div_clk1";
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
};
pm6150_gpios: pinctrl@c000 {
compatible = "qcom,pm6150-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pm6150_rtc: qcom,pm6150_rtc {
compatible = "qcom,pm8941-rtc";
reg = <0x6000>, <0x6100>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
};
};
qcom,pm6150@1 {
compatible ="qcom,spmi-pmic";
reg = <1 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm6150_vib: qcom,vibrator@5300 {
compatible = "qcom,qpnp-vibrator-ldo";
reg = <0x5300>;
qcom,vib-ldo-volt-uv = <3000000>;
qcom,disable-overdrive;
};
};
};
&thermal_zones {
pm6150_temp_alarm: pm6150-tz {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm6150_tz>;
trips {
pm6150_trip0: trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
pm6150_trip1: trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "passive";
};
trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "passive";
};
};
};
pm6150-ibat-lvl0 {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm6150_bcl 0>;
trips {
ibat_lvl0:ibat-lvl0 {
temperature = <5500>;
hysteresis = <200>;
type = "passive";
};
};
};
pm6150-ibat-lvl1 {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm6150_bcl 1>;
trips {
ibat_lvl1:ibat-lvl1 {
temperature = <6000>;
hysteresis = <200>;
type = "passive";
};
};
};
vbat {
polling-delay-passive = <0>;
polling-delay = <0>;
trips {
vbat_lvl0: vbat-lvl0 {
thermal-sensors = <&pm6150_bcl 2>;
temperature = <3000>;
hysteresis = <200>;
type = "passive";
};
vbat_lvl1:vbat-lvl1 {
thermal-sensors = <&pm6150_bcl 3>;
temperature = <2800>;
hysteresis = <200>;
type = "passive";
};
vbat_lvl2:vbat-lvl2 {
thermal-sensors = <&pm6150_bcl 4>;
temperature = <2600>;
hysteresis = <200>;
type = "passive";
};
};
};
pm6150-bcl-lvl0 {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-sensors = <&pm6150_bcl 5>;
trips {
bcl_lvl0: bcl-lvl0 {
temperature = <1>;
hysteresis = <1>;
type = "passive";
};
};
};
pm6150-bcl-lvl1 {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-sensors = <&pm6150_bcl 6>;
trips {
bcl_lvl1: bcl-lvl1 {
temperature = <1>;
hysteresis = <1>;
type = "passive";
};
};
};
pm6150-bcl-lvl2 {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-sensors = <&pm6150_bcl 7>;
trips {
bcl_lvl2: bcl-lvl2 {
temperature = <1>;
hysteresis = <1>;
type = "passive";
};
};
};
socd {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-sensors = <&bcl_soc>;
trips {
socd_trip:socd-trip {
temperature = <90>;
hysteresis = <0>;
type = "passive";
};
};
};
};

68
qcom/pm6150l.dtsi
View File

@@ -1,6 +1,6 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
* Copyright (c) 2024, 2025 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/clock/qcom,rpmcc.h>
@@ -128,6 +128,38 @@
#pwm-cells = <2>;
};
pm6150l_lcdb: qcom,lcdb@ec00 {
compatible = "qcom,lcdb-pm6150l";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xec00>;
interrupts = <0x5 0xec 0x1 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "sc-irq";
qcom,voltage-step-ramp;
status = "disabled";
lcdb_ldo_vreg: ldo {
label = "ldo";
regulator-name = "lcdb_ldo";
regulator-min-microvolt = <4000000>;
regulator-max-microvolt = <6000000>;
};
lcdb_ncp_vreg: ncp {
label = "ncp";
regulator-name = "lcdb_ncp";
regulator-min-microvolt = <4000000>;
regulator-max-microvolt = <6000000>;
};
lcdb_bst_vreg: bst {
label = "bst";
regulator-name = "lcdb_bst";
regulator-min-microvolt = <4700000>;
regulator-max-microvolt = <6275000>;
};
};
flash_led: qcom,leds@d300 {
compatible = "qcom,pm6150l-flash-led-v2";
status = "disabled";
@@ -246,6 +278,36 @@
};
};
pm6150l_wled: qcom,wled@d800 {
compatible = "qcom,pm6150l-spmi-wled";
reg = <0xd800>, <0xd900>;
reg-names = "wled-ctrl-base", "wled-sink-base";
label = "backlight";
interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
<0x5 0xd8 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x5 0xd8 0x5 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "ovp-irq", "pre-flash-irq",
"flash-irq";
qcom,auto-calibration;
status = "disabled";
wled_flash: qcom,wled-flash {
label = "flash";
qcom,default-led-trigger = "wled_flash";
};
wled_torch: qcom,wled-torch {
label = "torch";
qcom,default-led-trigger = "wled_torch";
qcom,wled-torch-timer = <1200>;
};
wled_switch: qcom,wled-switch {
label = "switch";
qcom,default-led-trigger = "wled_switch";
};
};
pm6150l_lpg: qcom,pwms@b100 {
compatible = "qcom,pwm-lpg";
reg = <0xb100>, <0xb000>;
@@ -351,7 +413,6 @@
pm6150l_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm6150l_tz>;
trips {
@@ -378,7 +439,6 @@
pm6150l-bcl-lvl0 {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm6150l_bcl 5>;
trips {
@@ -393,7 +453,6 @@
pm6150l-bcl-lvl1 {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm6150l_bcl 6>;
trips {
@@ -408,7 +467,6 @@
pm6150l-bcl-lvl2 {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm6150l_bcl 7>;
trips {

244
qcom/qcs610-iot.dtsi
View File

@@ -3,7 +3,11 @@
* Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/qcom,gcc-sm6150.h>
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/iio/qti_power_supply_iio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Qualcomm Technologies, Inc. QCS610 IOT";
@@ -11,6 +15,246 @@
qcom,board-id = <32 0>;
};
&pm6150l_gpios {
key_vol_up {
key_vol_up_default: key_vol_up_default {
pins = "gpio2";
function = "normal";
input-enable;
bias-pull-up;
power-source = <0>;
};
};
irled {
irled_pwm: irled_pwm_default {
pins = "gpio6";
function = "func1";
qcom,drive-strength = <2>;
power-source = <0>;
bias-disable;
output-low;
};
};
cam_sensor_dvdd {
cam_sensor_dvdd_default: cam_sensor_dvdd_default {
pins = "gpio3";
function = "normal";
output-low;
power-source = <0>;
};
};
cam_sensor_1_vana {
cam_sensor_1_vana_default: cam_sensor_1_vana_default {
pins = "gpio8";
function = "normal";
output-low;
power-source = <0>;
};
};
cam_sensor_0_vana {
cam_sensor_0_vana_default: cam_sensor_0_vana_default {
pins = "gpio9";
function = "normal";
output-low;
power-source = <0>;
};
};
cam_sensor_1_2_vana {
cam_sensor_1_2_vana_default: cam_sensor_1_2_vana_default {
pins = "gpio4";
function = "normal";
output-low;
power-source = <0>;
};
};
};
&soc {
gpio_keys {
compatible = "gpio-keys";
label = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&key_vol_up_default>;
vol_up {
label = "volume_up";
gpios = <&pm6150l_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEUP>;
linux,can-disable;
debounce-interval = <15>;
gpio-key,wakeup;
};
};
mtp_batterydata: qcom,battery-data {
qcom,batt-id-range-pct = <15>;
#include "qg-batterydata-alium-3600mah.dtsi"
#include "qg-batterydata-mlp356477-2800mah.dtsi"
};
};
&flash_led {
status = "ok";
};
&pm6150l_wled {
qcom,string-cfg= <1>;
qcom,leds-per-string = <7>;
status = "ok";
qcom,cabc-sel = <0>;
qcom,fs-current-limit = <20000>;
default-brightness = <2000>;
};
&pm6150l_lcdb {
status = "ok";
};
&pm6150l_pwm_1 {
status = "okay";
};
&pm6150_pdphy {
#io-channel-cells = <1>;
io-channels = <&pm6150_charger PSY_IIO_PD_ACTIVE>,
<&pm6150_charger PSY_IIO_TYPEC_CC_ORIENTATION>,
<&pm6150_charger PSY_IIO_CONNECTOR_TYPE>,
<&pm6150_charger PSY_IIO_TYPEC_POWER_ROLE>,
<&pm6150_charger PSY_IIO_PD_USB_SUSPEND_SUPPORTED>,
<&pm6150_charger PSY_IIO_TYPEC_SRC_RP>,
<&pm6150_charger PSY_IIO_PD_IN_HARD_RESET>,
<&pm6150_charger PSY_IIO_PD_CURRENT_MAX>,
<&pm6150_charger PSY_IIO_PR_SWAP>,
<&pm6150_charger PSY_IIO_PD_VOLTAGE_MIN>,
<&pm6150_charger PSY_IIO_PD_VOLTAGE_MAX>,
<&pm6150_charger PSY_IIO_USB_REAL_TYPE>,
<&pm6150_charger PSY_IIO_TYPEC_MODE>,
<&pm6150_charger PSY_IIO_PE_START>;
io-channel-names = "pd_active",
"typec_cc_orientation",
"connector_type",
"typec_power_role",
"pd_usb_suspend_supported",
"typec_src_rp",
"pd_in_hard_reset",
"pr_current_max",
"pr_swap",
"pd_voltage_min",
"pd_voltage_max",
"real_type",
"typec_mode",
"pe_start";
};
&pm6150_qg {
io-channels = <&pm6150_vadc ADC5_BAT_THERM_100K_PU>,
<&pm6150_vadc ADC5_BAT_ID_100K_PU>,
<&pm6150_charger PSY_IIO_INPUT_CURRENT_LIMITED>,
<&pm6150_charger PSY_IIO_RECHARGE_SOC>,
<&pm6150_charger PSY_IIO_FORCE_RECHARGE>,
<&pm6150_charger PSY_IIO_CHARGE_DONE>,
<&smb1390_charger PSY_IIO_CP_ENABLE>;
io-channel-names = "batt-therm",
"batt-id",
"input_current_limited",
"recharge_soc",
"force_recharge",
"charge_done",
"cp_charging_enabled";
qcom,battery-data = <&mtp_batterydata>;
qcom,qg-iterm-ma = <100>;
qcom,hold-soc-while-full;
qcom,linearize-soc;
qcom,cl-feedback-on;
};
&pm6150_charger {
depends-on-supply = <&pm6150_vadc>;
#io-channel-cells = <1>;
io-channels = <&pm6150_vadc ADC5_USB_IN_V_16>,
<&pm6150_vadc ADC5_USB_IN_I>,
<&pm6150_vadc ADC5_CHG_TEMP>,
<&pm6150_vadc ADC5_DIE_TEMP>,
<&pm6150_vadc ADC5_AMUX_THM4_100K_PU>,
<&pm6150_vadc ADC5_SBUx>,
<&pm6150_vadc ADC5_VPH_PWR>,
<&pm6150_qg PSY_IIO_CHARGE_FULL>,
<&pm6150_qg PSY_IIO_CHARGE_FULL_DESIGN>,
<&pm6150_qg PSY_IIO_RESISTANCE_ID>,
<&pm6150_qg PSY_IIO_VOLTAGE_NOW>,
<&pm6150_qg PSY_IIO_TEMP>,
<&pm6150_qg PSY_IIO_CAPACITY>,
<&pm6150_qg PSY_IIO_VOLTAGE_OCV>,
<&pm6150_qg PSY_IIO_VOLTAGE_AVG>,
<&pm6150_qg PSY_IIO_DEBUG_BATTERY>,
<&pm6150_qg PSY_IIO_REAL_CAPACITY>,
<&pm6150_qg PSY_IIO_CC_SOC>,
<&pm6150_qg PSY_IIO_CURRENT_NOW>,
<&pm6150_qg PSY_IIO_VOLTAGE_MAX>,
<&pm6150_qg PSY_IIO_CHARGE_COUNTER>,
<&pm6150_qg PSY_IIO_CYCLE_COUNT>,
<&pm6150_qg PSY_IIO_TIME_TO_FULL_NOW>,
<&smb1390_charger PSY_IIO_PARALLEL_MODE>,
<&smb1390_charger PSY_IIO_PARALLEL_OUTPUT_MODE>,
<&smb1390_charger PSY_IIO_MIN_ICL>,
<&smb1390_charger PSY_IIO_CP_SWITCHER_EN>,
<&smb1390_charger PSY_IIO_CP_ENABLE>,
<&smb1390_charger PSY_IIO_CP_ILIM>,
<&smb1390_charger PSY_IIO_CP_DIE_TEMP>;
io-channel-names = "usb_in_voltage",
"usb_in_current",
"chg_temp",
"die_temp",
"conn_temp",
"sbux_res",
"vph_voltage",
"charge_full",
"charge_full_design",
"resistance_id",
"voltage_now",
"temp",
"capacity",
"voltage_ocv",
"voltage_avg",
"debug_battery",
"real_capacity",
"cc_soc",
"current_now",
"voltage_max",
"charge_counter",
"cycle_count",
"time_to_full_now",
"cp_parallel_mode",
"cp_parallel_output_mode",
"cp_min_icl",
"cp_switcher_en",
"cp_enable",
"cp_ilim",
"cp_die_temp";
qcom,battery-data = <&mtp_batterydata>;
qcom,auto-recharge-soc = <98>;
qcom,step-charging-enable;
qcom,sw-jeita-enable;
qcom,fcc-stepping-enable;
qcom,suspend-input-on-debug-batt;
qcom,sec-charger-config = <0>;
qcom,thermal-mitigation = <4200000 3500000 3000000
2500000 2000000 1500000 1000000 500000>;
dpdm-supply = <&qusb_phy0>;
qcom,charger-temp-max = <800>;
qcom,smb-temp-max = <800>;
};
&qupv3_se0_2uart {
status = "ok";
};

4
qcom/qcs610-ipc.dtsi
View File

@@ -10,3 +10,7 @@
compatible = "qcom,qcs610-iot", "qcom,qcs610", "qcom,iot";
qcom,board-id = <32 1>;
};
&pm6150_charger {
qcom,batteryless-platform;
};

210
qcom/qcs610-opk.dtsi
View File

@@ -7,6 +7,7 @@
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/clock/qcom,gcc-sm6150.h>
#include <dt-bindings/iio/qti_power_supply_iio.h>
/ {
model = "Qualcomm Technologies, Inc. QCS610 IOT";
@@ -18,6 +19,215 @@
qcom,gpios-reserved = <6 7 8 9>;
};
&pm6150l_gpios {
key_vol_up {
key_vol_up_default: key_vol_up_default {
pins = "gpio2";
function = "normal";
input-enable;
bias-pull-up;
power-source = <0>;
};
};
irled {
irled_pwm: irled_pwm_default {
pins = "gpio6";
function = "func1";
qcom,drive-strength = <2>;
power-source = <0>;
bias-disable;
output-low;
};
};
cam_sensor_dvdd {
cam_sensor_dvdd_default: cam_sensor_dvdd_default {
pins = "gpio3";
function = "normal";
output-low;
power-source = <0>;
};
};
cam_sensor_1_vana {
cam_sensor_1_vana_default: cam_sensor_1_vana_default {
pins = "gpio8";
function = "normal";
output-low;
power-source = <0>;
};
};
cam_sensor_0_vana {
cam_sensor_0_vana_default: cam_sensor_0_vana_default {
pins = "gpio9";
function = "normal";
output-low;
power-source = <0>;
};
};
cam_sensor_1_2_vana {
cam_sensor_1_2_vana_default: cam_sensor_1_2_vana_default {
pins = "gpio4";
function = "normal";
output-low;
power-source = <0>;
};
};
};
&soc {
gpio_keys {
compatible = "gpio-keys";
label = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&key_vol_up_default>;
vol_up {
label = "volume_up";
gpios = <&pm6150l_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEUP>;
linux,can-disable;
debounce-interval = <15>;
gpio-key,wakeup;
};
};
mtp_batterydata: qcom,battery-data {
qcom,batt-id-range-pct = <15>;
#include "qg-batterydata-alium-3600mah.dtsi"
#include "qg-batterydata-mlp356477-2800mah.dtsi"
};
};
&flash_led {
status = "ok";
};
&pm6150l_wled {
qcom,string-cfg= <1>;
qcom,leds-per-string = <7>;
status = "ok";
qcom,cabc-sel = <0>;
qcom,fs-current-limit = <20000>;
default-brightness = <2000>;
};
&pm6150l_lcdb {
status = "ok";
};
&pm6150l_pwm_1 {
status = "okay";
};
&pm6150_qg {
qcom,battery-data = <&mtp_batterydata>;
qcom,qg-iterm-ma = <100>;
qcom,hold-soc-while-full;
qcom,linearize-soc;
qcom,cl-feedback-on;
};
&pm6150_pdphy {
#io-channel-cells = <1>;
io-channels = <&pm6150_charger PSY_IIO_PD_ACTIVE>,
<&pm6150_charger PSY_IIO_TYPEC_CC_ORIENTATION>,
<&pm6150_charger PSY_IIO_CONNECTOR_TYPE>,
<&pm6150_charger PSY_IIO_TYPEC_POWER_ROLE>,
<&pm6150_charger PSY_IIO_PD_USB_SUSPEND_SUPPORTED>,
<&pm6150_charger PSY_IIO_TYPEC_SRC_RP>,
<&pm6150_charger PSY_IIO_PD_IN_HARD_RESET>,
<&pm6150_charger PSY_IIO_PD_CURRENT_MAX>,
<&pm6150_charger PSY_IIO_PR_SWAP>,
<&pm6150_charger PSY_IIO_PD_VOLTAGE_MIN>,
<&pm6150_charger PSY_IIO_PD_VOLTAGE_MAX>,
<&pm6150_charger PSY_IIO_USB_REAL_TYPE>,
<&pm6150_charger PSY_IIO_TYPEC_MODE>,
<&pm6150_charger PSY_IIO_PE_START>;
io-channel-names = "pd_active",
"typec_cc_orientation",
"connector_type",
"typec_power_role",
"pd_usb_suspend_supported",
"typec_src_rp",
"pd_in_hard_reset",
"pr_current_max",
"pr_swap",
"pd_voltage_min",
"pd_voltage_max",
"real_type",
"typec_mode",
"pe_start";
};
&pm6150_charger {
depends-on-supply = <&pm6150_vadc>;
#io-channel-cells = <1>;
io-channels = <&pm6150_vadc ADC5_USB_IN_V_16>,
<&pm6150_vadc ADC5_USB_IN_I>,
<&pm6150_vadc ADC5_CHG_TEMP>,
<&pm6150_vadc ADC5_DIE_TEMP>,
<&pm6150_vadc ADC5_AMUX_THM4_100K_PU>,
<&pm6150_vadc ADC5_SBUx>,
<&pm6150_vadc ADC5_VPH_PWR>,
<&pm6150_qg PSY_IIO_CHARGE_FULL>,
<&pm6150_qg PSY_IIO_CHARGE_FULL_DESIGN>,
<&pm6150_qg PSY_IIO_RESISTANCE_ID>,
<&pm6150_qg PSY_IIO_VOLTAGE_NOW>,
<&pm6150_qg PSY_IIO_TEMP>,
<&pm6150_qg PSY_IIO_CAPACITY>,
<&pm6150_qg PSY_IIO_VOLTAGE_OCV>,
<&pm6150_qg PSY_IIO_VOLTAGE_AVG>,
<&pm6150_qg PSY_IIO_DEBUG_BATTERY>,
<&pm6150_qg PSY_IIO_REAL_CAPACITY>,
<&pm6150_qg PSY_IIO_CC_SOC>,
<&pm6150_qg PSY_IIO_CURRENT_NOW>,
<&pm6150_qg PSY_IIO_VOLTAGE_MAX>,
<&pm6150_qg PSY_IIO_CHARGE_COUNTER>,
<&pm6150_qg PSY_IIO_CYCLE_COUNT>,
<&pm6150_qg PSY_IIO_TIME_TO_FULL_NOW>;
io-channel-names = "usb_in_voltage",
"usb_in_current",
"chg_temp",
"die_temp",
"conn_temp",
"sbux_res",
"vph_voltage",
"charge_full",
"charge_full_design",
"resistance_id",
"voltage_now",
"temp",
"capacity",
"voltage_ocv",
"voltage_avg",
"debug_battery",
"real_capacity",
"cc_soc",
"current_now",
"voltage_max",
"charge_counter",
"cycle_count",
"time_to_full_now";
qcom,battery-data = <&mtp_batterydata>;
qcom,auto-recharge-soc = <98>;
qcom,step-charging-enable;
qcom,sw-jeita-enable;
qcom,fcc-stepping-enable;
qcom,suspend-input-on-debug-batt;
qcom,sec-charger-config = <0>;
qcom,thermal-mitigation = <4200000 3500000 3000000
2500000 2000000 1500000 1000000 500000>;
dpdm-supply = <&qusb_phy0>;
qcom,charger-temp-max = <800>;
qcom,smb-temp-max = <800>;
};
&L16A {
regulator-max-microvolt = <3304000>;
};

22
qcom/qcs610.dtsi
View File

@@ -4,6 +4,7 @@
*/
#include "sm6150.dtsi"
#include "sm6150-pmic-overlay.dtsi"
/ {
model = "Qualcomm Technologies, Inc. QCS610";
@@ -26,3 +27,24 @@
status = "ok";
};
};
&qupv3_se3_i2c {
status = "ok";
#include "smb1390.dtsi"
};
&smb1390 {
/delete-property/ interrupts;
interrupts = <0x0 0xc2 0x0 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&smb_stat_default>;
status = "ok";
};
&smb1390_charger {
/delete-property/ compatible;
compatible = "qcom,smb1390-charger-psy";
io-channels = <&pm6150_vadc ADC5_AMUX_THM3>;
io-channel-names = "cp_die_temp";
status = "ok";
};

1040
qcom/qg-batterydata-alium-3600mah.dtsi Normal file
View File

File diff suppressed because it is too large Load Diff

1037
qcom/qg-batterydata-mlp356477-2800mah.dtsi Normal file
View File

File diff suppressed because it is too large Load Diff

189
qcom/sm6150-pmic-overlay.dtsi Normal file
View File

@@ -0,0 +1,189 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include "pm6150.dtsi"
#include "pm6150l.dtsi"
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
&pm6150_vadc {
sdm_therm {
reg = <ADC5_AMUX_THM2_100K_PU>;
label = "sdm_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
smb1390_therm {
reg = <ADC5_AMUX_THM3>;
label = "smb1390_therm";
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
conn_therm {
reg = <ADC5_AMUX_THM4_100K_PU>;
label = "conn_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
};
&pm6150_adc_tm {
/* Channel nodes */
xo_therm {
reg = <0>;
io-channels = <&pm6150_vadc ADC5_XO_THERM_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
sdm_therm {
reg = <1>;
io-channels = <&pm6150_vadc ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
conn_therm {
reg = <2>;
io-channels = <&pm6150_vadc ADC5_AMUX_THM4_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
&pm6150l_4 {
qcom,power-on@800 {
status = "disabled";
};
};
&pm6150l_vadc {
emmc_ufs_therm {
reg = <ADC5_AMUX_THM1_100K_PU>;
label = "emmc_ufs_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
rf_pa0_therm {
reg = <ADC5_AMUX_THM2_100K_PU>;
label = "rf_pa0_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
rf_pa1_therm {
reg = <ADC5_AMUX_THM3_100K_PU>;
label = "rf_pa1_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
camera_flash_therm {
reg = <ADC5_GPIO1_100K_PU>;
label = "camera_flash_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
quiet_therm {
reg = <ADC5_GPIO4_100K_PU>;
label = "quiet_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
};
&pm6150l_adc_tm {
/* Channel nodes */
emmc_ufs_therm {
reg = <0>;
io-channels = <&pm6150l_vadc ADC5_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
rf_pa0_therm {
reg = <1>;
io-channels = <&pm6150l_vadc ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
camera_flash_therm {
reg = <2>;
io-channels = <&pm6150l_vadc ADC5_GPIO1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
quiet_therm {
reg = <3>;
io-channels = <&pm6150l_vadc ADC5_GPIO4_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
&spmi_bus {
qcom,pm6150@0 {
pm6150_clkdiv: clock-controller@5b00 {
compatible = "qcom,spmi-clkdiv";
reg = <0x5b00>;
#clock-cells = <1>;
qcom,num-clkdivs = <1>;
clock-output-names = "pm6150_div_clk1";
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
assigned-clocks = <&pm6150_clkdiv 1>;
assigned-clock-rates = <19200000>;
};
};
qcom,pm6150l@4 {
pm6150l_clkdiv: clock-controller@5b00 {
compatible = "qcom,spmi-clkdiv";
reg = <0x5b00>;
#clock-cells = <1>;
qcom,num-clkdivs = <1>;
clock-output-names = "pm6150l_div_clk1";
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
};
};
};
&pm6150_gpios {
wcd934x_mclk {
wcd934x_mclk_default: wcd934x_mclk_default {
pins = "gpio8";
function = "func1";
qcom,drive-strength = <2>;
power-source = <0>;
bias-disable;
output-low;
};
};
smb_stat {
smb_stat_default: smb_stat_default {
pins = "gpio3";
function = "normal";
input-enable;
bias-pull-up;
qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;
power-source = <0>;
};
};
};

19
qcom/sm6150.dtsi
View File

@@ -522,6 +522,25 @@
msm_gpu: qcom,kgsl-3d0@5000000 { };
spmi_bus: qcom,spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0xc440000 0x1100>,
<0xc600000 0x2000000>,
<0xe600000 0x100000>,
<0xe700000 0xa0000>,
<0xc40a000 0x26000>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "periph_irq";
interrupt-controller;
#interrupt-cells = <4>;
#address-cells = <2>;
#size-cells = <0>;
cell-index = <0>;
qcom,channel = <0>;
qcom,ee = <0>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <1 1 0xf08>,

61
qcom/smb1390.dtsi Normal file
View File

@@ -0,0 +1,61 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/interrupt-controller/irq.h>
smb1390: qcom,smb1390@10 {
compatible = "qcom,i2c-pmic";
reg = <0x10>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&spmi_bus>;
interrupts = <0x2 0xC5 0x0 IRQ_TYPE_LEVEL_LOW>;
interrupt_names = "smb1390";
interrupt-controller;
#interrupt-cells = <3>;
qcom,periph-map = <0x10>;
status = "disabled";
smb1390_charger: qcom,charge_pump {
compatible = "qcom,smb1390-charger-psy";
#io-channel-cells = <1>;
interrupt-parent = <&smb1390>;
status = "disabled";
qcom,core {
interrupts = <0x10 0x0 IRQ_TYPE_EDGE_BOTH>,
<0x10 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x10 0x2 IRQ_TYPE_EDGE_BOTH>,
<0x10 0x3 IRQ_TYPE_EDGE_BOTH>,
<0x10 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x10 0x5 IRQ_TYPE_EDGE_RISING>,
<0x10 0x6 IRQ_TYPE_EDGE_RISING>,
<0x10 0x7 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "switcher-off-window",
"switcher-off-fault",
"tsd-fault",
"irev-fault",
"vph-ov-hard",
"vph-ov-soft",
"ilim",
"temp-alarm";
};
};
};
smb1390_slave: qcom,smb1390_slave@18 {
compatible = "qcom,i2c-pmic";
reg = <0x18>;
#address-cells = <1>;
#size-cells = <0>;
qcom,periph-map = <0x10>;
status = "disabled";
smb1390_slave_charger: qcom,charge_pump_slave {
compatible = "qcom,smb1390-slave";
#io-channel-cells = <1>;
status = "disabled";
};
};