Merge tag 'ASB-2021-12-05_4.19-stable' of https://android.googlesource.com/kernel/common into lineage-21

https://source.android.com/security/bulletin/2021-12-01
CVE-2021-33909
CVE-2021-38204
CVE-2021-0961

* tag 'ASB-2021-12-05_4.19-stable' of https://android.googlesource.com/kernel/common:
  BACKPORT: arm64: vdso32: suppress error message for 'make mrproper'
  Linux 4.19.219
  tty: hvc: replace BUG_ON() with negative return value
  xen/netfront: don't trust the backend response data blindly
  xen/netfront: disentangle tx_skb_freelist
  xen/netfront: don't read data from request on the ring page
  xen/netfront: read response from backend only once
  xen/blkfront: don't trust the backend response data blindly
  xen/blkfront: don't take local copy of a request from the ring page
  xen/blkfront: read response from backend only once
  xen: sync include/xen/interface/io/ring.h with Xen's newest version
  fuse: release pipe buf after last use
  NFC: add NCI_UNREG flag to eliminate the race
  hugetlbfs: flush TLBs correctly after huge_pmd_unshare
  s390/mm: validate VMA in PGSTE manipulation functions
  tracing: Check pid filtering when creating events
  vhost/vsock: fix incorrect used length reported to the guest
  net: hns3: fix VF RSS failed problem after PF enable multi-TCs
  net/smc: Don't call clcsock shutdown twice when smc shutdown
  MIPS: use 3-level pgtable for 64KB page size on MIPS_VA_BITS_48
  tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows
  PM: hibernate: use correct mode for swsusp_close()
  net/smc: Ensure the active closing peer first closes clcsock
  ipv6: fix typos in __ip6_finish_output()
  drm/vc4: fix error code in vc4_create_object()
  scsi: mpt3sas: Fix kernel panic during drive powercycle test
  ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE
  NFSv42: Don't fail clone() unless the OP_CLONE operation failed
  firmware: arm_scmi: pm: Propagate return value to caller
  net: ieee802154: handle iftypes as u32
  ASoC: topology: Add missing rwsem around snd_ctl_remove() calls
  ASoC: qdsp6: q6routing: Conditionally reset FrontEnd Mixer
  ARM: dts: BCM5301X: Add interrupt properties to GPIO node
  ARM: dts: BCM5301X: Fix I2C controller interrupt
  netfilter: ipvs: Fix reuse connection if RS weight is 0
  arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function
  arm64: dts: marvell: armada-37xx: declare PCIe reset pin
  pinctrl: armada-37xx: Correct PWM pins definitions
  pinctrl: armada-37xx: add missing pin: PCIe1 Wakeup
  pinctrl: armada-37xx: Correct mpp definitions
  PCI: aardvark: Fix checking for link up via LTSSM state
  PCI: aardvark: Fix link training
  PCI: aardvark: Fix PCIe Max Payload Size setting
  PCI: aardvark: Configure PCIe resources from 'ranges' DT property
  PCI: aardvark: Update comment about disabling link training
  PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link()
  PCI: aardvark: Fix compilation on s390
  PCI: aardvark: Don't touch PCIe registers if no card connected
  PCI: aardvark: Indicate error in 'val' when config read fails
  PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros
  PCI: aardvark: Issue PERST via GPIO
  PCI: aardvark: Improve link training
  PCI: aardvark: Train link immediately after enabling training
  PCI: aardvark: Wait for endpoint to be ready before training link
  PCI: aardvark: Fix a leaked reference by adding missing of_node_put()
  proc/vmcore: fix clearing user buffer by properly using clear_user()
  xtensa: use CONFIG_USE_OF instead of CONFIG_OF
  tracing: Fix pid filtering when triggers are attached
  xen: detect uninitialized xenbus in xenbus_init
  xen: don't continue xenstore initialization in case of errors
  fuse: fix page stealing
  staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect()
  HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts
  media: cec: copy sequence field for the reply
  ALSA: ctxfi: Fix out-of-range access
  binder: fix test regression due to sender_euid change
  usb: hub: Fix locking issues with address0_mutex
  usb: hub: Fix usb enumeration issue due to address0 race
  usb: dwc2: hcd_queue: Fix use of floating point literal
  USB: serial: option: add Fibocom FM101-GL variants
  USB: serial: option: add Telit LE910S1 0x9200 composition
  Revert "net: sched: update default qdisc visibility after Tx queue cnt changes"
  Revert "serial: core: Fix initializing and restoring termios speed"
  ANDROID: GKI: disable CONFIG_FORTIFY_SOURCE
  Linux 4.19.218
  soc/tegra: pmc: Fix imbalanced clock disabling in error code path
  usb: max-3421: Use driver data instead of maintaining a list of bound devices
  ASoC: DAPM: Cover regression by kctl change notification fix
  RDMA/netlink: Add __maybe_unused to static inline in C file
  batman-adv: Don't always reallocate the fragmentation skb head
  batman-adv: Reserve needed_*room for fragments
  batman-adv: Consider fragmentation for needed_headroom
  batman-adv: mcast: fix duplicate mcast packets in BLA backbone from LAN
  perf/core: Avoid put_page() when GUP fails
  drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors
  drm/udl: fix control-message timeout
  cfg80211: call cfg80211_stop_ap when switch from P2P_GO type
  parisc/sticon: fix reverse colors
  btrfs: fix memory ordering between normal and ordered work functions
  udf: Fix crash after seekdir
  x86/hyperv: Fix NULL deref in set_hv_tscchange_cb() if Hyper-V setup fails
  mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag
  ipc: WARN if trying to remove ipc object which is absent
  hexagon: export raw I/O routines for modules
  tun: fix bonding active backup with arp monitoring
  perf/x86/intel/uncore: Fix IIO event constraints for Skylake Server
  perf/x86/intel/uncore: Fix filter_tid mask for CHA events on Skylake Server
  NFC: reorder the logic in nfc_{un,}register_device
  NFC: reorganize the functions in nci_request
  i40e: Fix display error code in dmesg
  i40e: Fix changing previously set num_queue_pairs for PFs
  i40e: Fix NULL ptr dereference on VSI filter sync
  i40e: Fix correct max_pkt_size on VF RX queue
  net: virtio_net_hdr_to_skb: count transport header in UFO
  platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()'
  mips: lantiq: add support for clk_get_parent()
  mips: bcm63xx: add support for clk_get_parent()
  MIPS: generic/yamon-dt: fix uninitialized variable error
  iavf: Fix for the false positive ASQ/ARQ errors while issuing VF reset
  iavf: check for null in iavf_fix_features
  net: bnx2x: fix variable dereferenced before check
  drm/nouveau: hdmigv100.c: fix corrupted HDMI Vendor InfoFrame
  sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
  mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set
  sh: define __BIG_ENDIAN for math-emu
  sh: fix kconfig unmet dependency warning for FRAME_POINTER
  f2fs: fix up f2fs_lookup tracepoints
  maple: fix wrong return value of maple_bus_init().
  sh: check return code of request_irq
  powerpc/dcr: Use cmplwi instead of 3-argument cmpli
  ALSA: gus: fix null pointer dereference on pointer block
  powerpc/5200: dts: fix memory node unit name
  scsi: target: Fix alua_tg_pt_gps_count tracking
  scsi: target: Fix ordered tag handling
  MIPS: sni: Fix the build
  tty: tty_buffer: Fix the softlockup issue in flush_to_ldisc
  ALSA: ISA: not for M68K
  usb: host: ohci-tmio: check return value after calling platform_get_resource()
  ARM: dts: omap: fix gpmc,mux-add-data type
  firmware_loader: fix pre-allocated buf built-in firmware use
  scsi: advansys: Fix kernel pointer leak
  ASoC: nau8824: Add DMI quirk mechanism for active-high jack-detect
  arm64: dts: freescale: fix arm,sp805 compatible string
  usb: typec: tipd: Remove WARN_ON in tps6598x_block_read
  usb: musb: tusb6010: check return value after calling platform_get_resource()
  arm64: dts: hisilicon: fix arm,sp805 compatible string
  scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq()
  arm64: zynqmp: Fix serial compatible string
  arm64: zynqmp: Do not duplicate flash partition label property
  erofs: fix unsafe pagevec reuse of hooked pclusters
  erofs: remove the occupied parameter from z_erofs_pagevec_enqueue()
  PCI: Add MSI masking quirk for Nvidia ION AHCI
  PCI/MSI: Deal with devices lying about their MSI mask capability
  PCI/MSI: Destroy sysfs before freeing entries
  parisc/entry: fix trace test in syscall exit path
  fortify: Explicitly disable Clang support
  ext4: fix lazy initialization next schedule time computation in more granular unit
  x86/cpu: Fix migration safety with X86_BUG_NULL_SEL
  fuse: truncate pagecache on atomic_o_trunc
  PCI: Add PCI_EXP_DEVCTL_PAYLOAD_* macros
  s390/tape: fix timer initialization in tape_std_assign()
  s390/cio: check the subchannel validity for dev_busid
  video: backlight: Drop maximum brightness override for brightness zero
  backlight: gpio-backlight: Correct initial power state handling
  mm, oom: do not trigger out_of_memory from the #PF
  mm, oom: pagefault_out_of_memory: don't force global OOM for dying tasks
  powerpc/bpf: Emit stf barrier instruction sequences for BPF_NOSPEC
  powerpc/security: Add a helper to query stf_barrier type
  powerpc/bpf: Fix BPF_SUB when imm == 0x80000000
  powerpc/bpf: Validate branch ranges
  powerpc/lib: Add helper to check if offset is within conditional branch range
  9p/net: fix missing error check in p9_check_errors
  f2fs: should use GFP_NOFS for directory inodes
  ARM: 9156/1: drop cc-option fallbacks for architecture selection
  ARM: 9155/1: fix early early_iounmap()
  USB: chipidea: fix interrupt deadlock
  cxgb4: fix eeprom len when diagnostics not implemented
  vsock: prevent unnecessary refcnt inc for nonblocking connect
  arm64: pgtable: make __pte_to_phys/__phys_to_pte_val inline functions
  nfc: pn533: Fix double free when pn533_fill_fragment_skbs() fails
  llc: fix out-of-bound array index in llc_sk_dev_hash()
  zram: off by one in read_block_state()
  mm/zsmalloc.c: close race window between zs_pool_dec_isolated() and zs_unregister_migration()
  bonding: Fix a use-after-free problem when bond_sysfs_slave_add() failed
  ACPI: PMIC: Fix intel_pmic_regs_handler() read accesses
  net: davinci_emac: Fix interrupt pacing disable
  xen-pciback: Fix return in pm_ctrl_init()
  i2c: xlr: Fix a resource leak in the error handling path of 'xlr_i2c_probe()'
  scsi: qla2xxx: Turn off target reset during issue_lip
  scsi: qla2xxx: Fix gnl list corruption
  ar7: fix kernel builds for compiler test
  watchdog: f71808e_wdt: fix inaccurate report in WDIOC_GETTIMEOUT
  m68k: set a default value for MEMORY_RESERVE
  dmaengine: dmaengine_desc_callback_valid(): Check for `callback_result`
  netfilter: nfnetlink_queue: fix OOB when mac header was cleared
  auxdisplay: ht16k33: Fix frame buffer device blanking
  auxdisplay: ht16k33: Connect backlight to fbdev
  auxdisplay: img-ascii-lcd: Fix lock-up when displaying empty string
  dmaengine: at_xdmac: fix AT_XDMAC_CC_PERID() macro
  mtd: spi-nor: hisi-sfc: Remove excessive clk_disable_unprepare()
  fs: orangefs: fix error return code of orangefs_revalidate_lookup()
  NFS: Fix deadlocks in nfs_scan_commit_list()
  PCI: aardvark: Don't spam about PIO Response Status
  drm/plane-helper: fix uninitialized variable reference
  pnfs/flexfiles: Fix misplaced barrier in nfs4_ff_layout_prepare_ds
  rpmsg: Fix rpmsg_create_ept return when RPMSG config is not defined
  apparmor: fix error check
  power: supply: bq27xxx: Fix kernel crash on IRQ handler register error
  mips: cm: Convert to bitfield API to fix out-of-bounds access
  serial: xilinx_uartps: Fix race condition causing stuck TX
  phy: qcom-qusb2: Fix a memory leak on probe
  ASoC: cs42l42: Defer probe if request_threaded_irq() returns EPROBE_DEFER
  ASoC: cs42l42: Correct some register default values
  RDMA/mlx4: Return missed an error if device doesn't support steering
  scsi: csiostor: Uninitialized data in csio_ln_vnp_read_cbfn()
  power: supply: rt5033_battery: Change voltage values to µV
  usb: gadget: hid: fix error code in do_config()
  serial: 8250_dw: Drop wrong use of ACPI_PTR()
  video: fbdev: chipsfb: use memset_io() instead of memset()
  memory: fsl_ifc: fix leak of irq and nand_irq in fsl_ifc_ctrl_probe
  soc/tegra: Fix an error handling path in tegra_powergate_power_up()
  arm: dts: omap3-gta04a4: accelerometer irq fix
  ALSA: hda: Reduce udelay() at SKL+ position reporting
  JFS: fix memleak in jfs_mount
  MIPS: loongson64: make CPU_LOONGSON64 depends on MIPS_FP_SUPPORT
  scsi: dc395: Fix error case unwinding
  ARM: dts: at91: tse850: the emac<->phy interface is rmii
  RDMA/bnxt_re: Fix query SRQ failure
  arm64: dts: rockchip: Fix GPU register width for RK3328
  ARM: s3c: irq-s3c24xx: Fix return value check for s3c24xx_init_intc()
  RDMA/rxe: Fix wrong port_cap_flags
  ibmvnic: Process crqs after enabling interrupts
  selftests/bpf: Fix fclose/pclose mismatch in test_progs
  crypto: pcrypt - Delay write to padata->info
  net: phylink: avoid mvneta warning when setting pause parameters
  net: amd-xgbe: Toggle PLL settings during rate change
  wcn36xx: add proper DMA memory barriers in rx path
  libertas: Fix possible memory leak in probe and disconnect
  libertas_tf: Fix possible memory leak in probe and disconnect
  KVM: s390: Fix handle_sske page fault handling
  samples/kretprobes: Fix return value if register_kretprobe() failed
  tcp: don't free a FIN sk_buff in tcp_remove_empty_skb()
  irq: mips: avoid nested irq_enter()
  s390/gmap: don't unconditionally call pte_unmap_unlock() in __gmap_zap()
  smackfs: use netlbl_cfg_cipsov4_del() for deleting cipso_v4_doi
  drm/msm: Fix potential NULL dereference in DPU SSPP
  clocksource/drivers/timer-ti-dm: Select TIMER_OF
  PM: hibernate: fix sparse warnings
  nvme-rdma: fix error code in nvme_rdma_setup_ctrl
  phy: micrel: ksz8041nl: do not use power down mode
  mwifiex: Send DELBA requests according to spec
  rsi: stop thread firstly in rsi_91x_init() error handling
  platform/x86: thinkpad_acpi: Fix bitwise vs. logical warning
  mmc: mxs-mmc: disable regulator on error and in the remove function
  net: stream: don't purge sk_error_queue in sk_stream_kill_queues()
  drm/msm: uninitialized variable in msm_gem_import()
  ath10k: fix max antenna gain unit
  hwmon: (pmbus/lm25066) Let compiler determine outer dimension of lm25066_coeff
  hwmon: Fix possible memleak in __hwmon_device_register()
  memstick: jmb38x_ms: use appropriate free function in jmb38x_ms_alloc_host()
  memstick: avoid out-of-range warning
  mmc: sdhci-omap: Fix NULL pointer exception if regulator is not configured
  b43: fix a lower bounds test
  b43legacy: fix a lower bounds test
  hwrng: mtk - Force runtime pm ops for sleep ops
  crypto: qat - disregard spurious PFVF interrupts
  crypto: qat - detect PFVF collision after ACK
  media: dvb-frontends: mn88443x: Handle errors of clk_prepare_enable()
  ath9k: Fix potential interrupt storm on queue reset
  media: em28xx: Don't use ops->suspend if it is NULL
  cpuidle: Fix kobject memory leaks in error paths
  media: cx23885: Fix snd_card_free call on null card pointer
  media: si470x: Avoid card name truncation
  media: mtk-vpu: Fix a resource leak in the error handling path of 'mtk_vpu_probe()'
  media: dvb-usb: fix ununit-value in az6027_rc_query
  media: em28xx: add missing em28xx_close_extension
  drm/amdgpu: fix warning for overflow check
  net: dsa: rtl8366rb: Fix off-by-one bug
  cgroup: Make rebind_subsystems() disable v2 controllers all at once
  Bluetooth: fix init and cleanup of sco_conn.timeout_work
  parisc/kgdb: add kgdb_roundup() to make kgdb work with idle polling
  parisc/unwind: fix unwinder when CONFIG_64BIT is enabled
  task_stack: Fix end_of_stack() for architectures with upwards-growing stack
  parisc: fix warning in flush_tlb_all
  x86/hyperv: Protect set_hv_tscchange_cb() against getting preempted
  spi: bcm-qspi: Fix missing clk_disable_unprepare() on error in bcm_qspi_probe()
  ARM: 9136/1: ARMv7-M uses BE-8, not BE-32
  gre/sit: Don't generate link-local addr if addr_gen_mode is IN6_ADDR_GEN_MODE_NONE
  ARM: clang: Do not rely on lr register for stacktrace
  smackfs: use __GFP_NOFAIL for smk_cipso_doi()
  iwlwifi: mvm: disable RX-diversity in powersave
  PM: hibernate: Get block device exclusively in swsusp_check()
  mwl8k: Fix use-after-free in mwl8k_fw_state_machine()
  tracing/cfi: Fix cmp_entries_* functions signature mismatch
  workqueue: make sysfs of unbound kworker cpumask more clever
  lib/xz: Validate the value before assigning it to an enum variable
  lib/xz: Avoid overlapping memcpy() with invalid input with in-place decompression
  memstick: r592: Fix a UAF bug when removing the driver
  leaking_addresses: Always print a trailing newline
  ACPI: battery: Accept charges over the design capacity as full
  ath: dfs_pattern_detector: Fix possible null-pointer dereference in channel_detector_create()
  tracefs: Have tracefs directories not set OTH permission bits by default
  media: usb: dvd-usb: fix uninit-value bug in dibusb_read_eeprom_byte()
  ACPICA: Avoid evaluating methods too early during system resume
  media: rcar-csi2: Add checking to rcsi2_start_receiver()
  ia64: don't do IA64_CMPXCHG_DEBUG without CONFIG_PRINTK
  media: mceusb: return without resubmitting URB in case of -EPROTO error.
  media: s5p-mfc: Add checking to s5p_mfc_probe().
  media: s5p-mfc: fix possible null-pointer dereference in s5p_mfc_probe()
  media: uvcvideo: Return -EIO for control errors
  media: uvcvideo: Set capability in s_param
  media: netup_unidvb: handle interrupt properly according to the firmware
  media: mt9p031: Fix corrupted frame after restarting stream
  mwifiex: Properly initialize private structure on interface type changes
  mwifiex: Run SET_BSS_MODE when changing from P2P to STATION vif-type
  x86: Increase exception stack sizes
  smackfs: Fix use-after-free in netlbl_catmap_walk()
  net: sched: update default qdisc visibility after Tx queue cnt changes
  locking/lockdep: Avoid RCU-induced noinstr fail
  MIPS: lantiq: dma: reset correct number of channel
  MIPS: lantiq: dma: add small delay after reset
  platform/x86: wmi: do not fail if disabling fails
  Bluetooth: fix use-after-free error in lock_sock_nested()
  Bluetooth: sco: Fix lock_sock() blockage by memcpy_from_msg()
  drm: panel-orientation-quirks: Add quirk for KD Kurio Smart C15200 2-in-1
  USB: iowarrior: fix control-message timeouts
  USB: serial: keyspan: fix memleak on probe errors
  iio: dac: ad5446: Fix ad5622_write() return value
  pinctrl: core: fix possible memory leak in pinctrl_enable()
  quota: correct error number in free_dqentry()
  quota: check block number when reading the block in quota file
  PCI: aardvark: Read all 16-bits from PCIE_MSI_PAYLOAD_REG
  PCI: aardvark: Fix return value of MSI domain .alloc() method
  PCI: aardvark: Do not unmask unused interrupts
  PCI: aardvark: Do not clear status bits of masked interrupts
  xen/balloon: add late_initcall_sync() for initial ballooning done
  ALSA: mixer: fix deadlock in snd_mixer_oss_set_volume
  ALSA: mixer: oss: Fix racy access to slots
  serial: core: Fix initializing and restoring termios speed
  powerpc/85xx: Fix oops when mpc85xx_smp_guts_ids node cannot be found
  power: supply: max17042_battery: use VFSOC for capacity when no rsns
  power: supply: max17042_battery: Prevent int underflow in set_soc_threshold
  signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT
  signal: Remove the bogus sigkill_pending in ptrace_stop
  RDMA/qedr: Fix NULL deref for query_qp on the GSI QP
  rsi: Fix module dev_oper_mode parameter description
  rsi: fix rate mask set leading to P2P failure
  rsi: fix key enabled check causing unwanted encryption for vap_id > 0
  rsi: fix occasional initialisation failure with BT coex
  wcn36xx: handle connection loss indication
  libata: fix checking of DMA state
  mwifiex: Read a PCI register after writing the TX ring write pointer
  wcn36xx: Fix HT40 capability for 2Ghz band
  evm: mark evm_fixmode as __ro_after_init
  rtl8187: fix control-message timeouts
  PCI: Mark Atheros QCA6174 to avoid bus reset
  ath10k: fix division by zero in send path
  ath10k: fix control-message timeout
  ath6kl: fix control-message timeout
  ath6kl: fix division by zero in send path
  mwifiex: fix division by zero in fw download path
  EDAC/sb_edac: Fix top-of-high-memory value for Broadwell/Haswell
  regulator: dt-bindings: samsung,s5m8767: correct s5m8767,pmic-buck-default-dvs-idx property
  regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is disabled
  hwmon: (pmbus/lm25066) Add offset coefficients
  ia64: kprobes: Fix to pass correct trampoline address to the handler
  btrfs: call btrfs_check_rw_degradable only if there is a missing device
  btrfs: fix lost error handling when replaying directory deletes
  btrfs: clear MISSING device status bit in btrfs_close_one_device
  vmxnet3: do not stop tx queues after netif_device_detach()
  watchdog: Fix OMAP watchdog early handling
  spi: spl022: fix Microwire full duplex mode
  xen/netfront: stop tx queues during live migration
  bpf: Prevent increasing bpf_jit_limit above max
  drm: panel-orientation-quirks: Add quirk for Aya Neo 2021
  mmc: winbond: don't build on M68K
  hyperv/vmbus: include linux/bitops.h
  sfc: Don't use netif_info before net_device setup
  cavium: Fix return values of the probe function
  scsi: qla2xxx: Fix unmap of already freed sgl
  cavium: Return negative value when pci_alloc_irq_vectors() fails
  x86/irq: Ensure PI wakeup handler is unregistered before module unload
  x86/sme: Use #define USE_EARLY_PGTABLE_L5 in mem_encrypt_identity.c
  ALSA: timer: Unconditionally unlink slave instances, too
  ALSA: timer: Fix use-after-free problem
  ALSA: synth: missing check for possible NULL after the call to kstrdup
  ALSA: usb-audio: Add registration quirk for JBL Quantum 400
  ALSA: line6: fix control and interrupt message timeouts
  ALSA: 6fire: fix control and bulk message timeouts
  ALSA: ua101: fix division by zero at probe
  ALSA: hda/realtek: Add quirk for Clevo PC70HS
  media: ir-kbd-i2c: improve responsiveness of hauppauge zilog receivers
  media: ite-cir: IR receiver stop working after receive overflow
  crypto: s5p-sss - Add error handling in s5p_aes_probe()
  firmware/psci: fix application of sizeof to pointer
  tpm: Check for integer overflow in tpm2_map_response_body()
  parisc: Fix ptrace check on syscall return
  mmc: dw_mmc: Dont wait for DRTO on Write RSP error
  ocfs2: fix data corruption on truncate
  libata: fix read log timeout value
  Input: i8042 - Add quirk for Fujitsu Lifebook T725
  Input: elantench - fix misreporting trackpoint coordinates
  binder: use cred instead of task for selinux checks
  binder: use euid from cred instead of using task
  xhci: Fix USB 3.1 enumeration issues by increasing roothub power-on-good delay
  ANDROID: usb: gadget: f_accessory: Mitgate handling of non-existent USB request
  UPSTREAM: binder: use cred instead of task for getsecid
  FROMGIT: binder: fix test regression due to sender_euid change
  BACKPORT: binder: use cred instead of task for selinux checks
  UPSTREAM: binder: use euid from cred instead of using task
  ANDROID: setlocalversion: make KMI_GENERATION optional
  Linux 4.19.217
  rsi: fix control-message timeout
  staging: rtl8192u: fix control-message timeouts
  staging: r8712u: fix control-message timeout
  comedi: vmk80xx: fix bulk and interrupt message timeouts
  comedi: vmk80xx: fix bulk-buffer overflow
  comedi: vmk80xx: fix transfer-buffer overflows
  comedi: ni_usb6501: fix NULL-deref in command paths
  comedi: dt9812: fix DMA buffers on stack
  isofs: Fix out of bound access for corrupted isofs image
  printk/console: Allow to disable console output by using console="" or console=null
  usb-storage: Add compatibility quirk flags for iODD 2531/2541
  usb: musb: Balance list entry in musb_gadget_queue
  usb: gadget: Mark USB_FSL_QE broken on 64-bit
  usb: ehci: handshake CMD_RUN instead of STS_HALT
  Revert "x86/kvm: fix vcpu-id indexed array sizes"
  Linux 4.19.216
  ARM: 9120/1: Revert "amba: make use of -1 IRQs warn"
  arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed
  sfc: Fix reading non-legacy supported link modes
  IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields
  IB/qib: Use struct_size() helper
  media: firewire: firedtv-avc: fix a buffer overflow in avc_ca_pmt()
  scsi: core: Put LLD module refcnt after SCSI device is released
  UPSTREAM: security: selinux: allow per-file labeling for bpffs
  Linux 4.19.215
  sctp: add vtag check in sctp_sf_ootb
  sctp: add vtag check in sctp_sf_do_8_5_1_E_sa
  sctp: add vtag check in sctp_sf_violation
  sctp: fix the processing for COOKIE_ECHO chunk
  sctp: use init_tag from inithdr for ABORT chunk
  net: nxp: lpc_eth.c: avoid hang when bringing interface down
  net: ethernet: microchip: lan743x: Fix dma allocation failure by using dma_set_mask_and_coherent
  net: ethernet: microchip: lan743x: Fix driver crash when lan743x_pm_resume fails
  nios2: Make NIOS2_DTB_SOURCE_BOOL depend on !COMPILE_TEST
  net: Prevent infinite while loop in skb_tx_hash()
  net: batman-adv: fix error handling
  regmap: Fix possible double-free in regcache_rbtree_exit()
  arm64: dts: allwinner: h5: NanoPI Neo 2: Fix ethernet node
  RDMA/mlx5: Set user priority for DCT
  net: lan78xx: fix division by zero in send path
  mmc: sdhci-esdhc-imx: clear the buffer_read_ready to reset standard tuning circuit
  mmc: sdhci: Map more voltage level to SDHCI_POWER_330
  mmc: dw_mmc: exynos: fix the finding clock sample value
  mmc: cqhci: clear HALT state after CQE enable
  mmc: vub300: fix control-message timeouts
  ipv6: make exception cache less predictible
  ipv6: use siphash in rt6_exception_hash()
  ipv4: use siphash instead of Jenkins in fnhe_hashfun()
  Revert "net: mdiobus: Fix memory leak in __mdiobus_register"
  nfc: port100: fix using -ERRNO as command type mask
  ata: sata_mv: Fix the error handling of mv_chip_id()
  usbnet: fix error return code in usbnet_probe()
  usbnet: sanity check for maxpacket
  ARM: 8819/1: Remove '-p' from LDFLAGS
  arm64: Avoid premature usercopy failure
  powerpc/bpf: Fix BPF_MOD when imm == 1
  ARM: 9141/1: only warn about XIP address when not compile testing
  ARM: 9139/1: kprobes: fix arch_init_kprobes() prototype
  ARM: 9134/1: remove duplicate memcpy() definition
  ARM: 9133/1: mm: proc-macros: ensure *_tlb_fns are 4B aligned
  ANDROID: Incremental fs: Fix dentry get/put imbalance on vfs_mkdir() failure
  Linux 4.19.214
  ARM: 9122/1: select HAVE_FUTEX_CMPXCHG
  tracing: Have all levels of checks prevent recursion
  net: mdiobus: Fix memory leak in __mdiobus_register
  scsi: core: Fix shost->cmd_per_lun calculation in scsi_add_host_with_dma()
  ALSA: hda: avoid write to STATESTS if controller is in reset
  platform/x86: intel_scu_ipc: Update timeout value in comment
  isdn: mISDN: Fix sleeping function called from invalid context
  ARM: dts: spear3xx: Fix gmac node
  net: stmmac: add support for dwmac 3.40a
  btrfs: deal with errors when checking if a dir entry exists during log replay
  gcc-plugins/structleak: add makefile var for disabling structleak
  netfilter: Kconfig: use 'default y' instead of 'm' for bool config option
  isdn: cpai: check ctr->cnr to avoid array index out of bound
  nfc: nci: fix the UAF of rf_conn_info object
  mm, slub: fix mismatch between reconstructed freelist depth and cnt
  ASoC: DAPM: Fix missing kctl change notifications
  ALSA: hda/realtek: Add quirk for Clevo PC50HS
  ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset
  vfs: check fd has read access in kernel_read_file_from_fd()
  elfcore: correct reference to CONFIG_UML
  ocfs2: mount fails with buffer overflow in strlen
  ocfs2: fix data corruption after conversion from inline format
  can: peak_pci: peak_pci_remove(): fix UAF
  can: peak_usb: pcan_usb_fd_decode_status(): fix back to ERROR_ACTIVE state notification
  can: rcar_can: fix suspend/resume
  net: hns3: disable sriov before unload hclge layer
  net: hns3: add limit ets dwrr bandwidth cannot be 0
  NIOS2: irqflags: rename a redefined register name
  lan78xx: select CRC32
  netfilter: ipvs: make global sysctl readonly in non-init netns
  ASoC: wm8960: Fix clock configuration on slave mode
  dma-debug: fix sg checks in debug_dma_map_sg()
  NFSD: Keep existing listeners on portlist error
  xtensa: xtfpga: Try software restart before simulating CPU reset
  xtensa: xtfpga: use CONFIG_USE_OF instead of CONFIG_OF
  ARM: dts: at91: sama5d2_som1_ek: disable ISC node by default

Change-Id: I29d109596ec63d8b26ae36edb5df0d163a4e51f6
Signed-off-by: bengris32 <bengris32@protonmail.ch>
This commit is contained in:
bengris32
2024-06-02 15:54:53 +01:00
501 changed files with 3946 additions and 1877 deletions

View File

@@ -5314,6 +5314,13 @@
with /sys/devices/system/xen_memory/xen_memory0/scrub_pages.
Default value controlled with CONFIG_XEN_SCRUB_PAGES_DEFAULT.
xen.balloon_boot_timeout= [XEN]
The time (in seconds) to wait before giving up to boot
in case initial ballooning fails to free enough memory.
Applies only when running as HVM or PVH guest and
started with less memory configured than allowed at
max. Default is 180.
xen.event_eoi_delay= [XEN]
How long to delay EOI handling in case of event
storms (jiffies). Default is 10.

View File

@@ -43,26 +43,26 @@ group emmc_nb
group pwm0
- pin 11 (GPIO1-11)
- functions pwm, gpio
- functions pwm, led, gpio
group pwm1
- pin 12
- functions pwm, gpio
- functions pwm, led, gpio
group pwm2
- pin 13
- functions pwm, gpio
- functions pwm, led, gpio
group pwm3
- pin 14
- functions pwm, gpio
- functions pwm, led, gpio
group pmic1
- pin 17
- pin 7
- functions pmic, gpio
group pmic0
- pin 16
- pin 6
- functions pmic, gpio
group i2c2
@@ -112,17 +112,25 @@ group usb2_drvvbus1
- functions drvbus, gpio
group sdio_sb
- pins 60-64
- pins 60-65
- functions sdio, gpio
group rgmii
- pins 42-55
- pins 42-53
- functions mii, gpio
group pcie1
- pins 39-40
- pins 39
- functions pcie, gpio
group pcie1_clkreq
- pins 40
- functions pcie, gpio
group smi
- pins 54-55
- functions smi, gpio
group ptp
- pins 56-58
- functions ptp, gpio

View File

@@ -13,6 +13,14 @@ common regulator binding documented in:
Required properties of the main device node (the parent!):
- s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
[1] If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
property is specified, then all the eight voltage values for the
's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
Optional properties of the main device node (the parent!):
- s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
units for buck2 when changing voltage using gpio dvs. Refer to [1] below
for additional information.
@@ -25,26 +33,13 @@ Required properties of the main device node (the parent!):
units for buck4 when changing voltage using gpio dvs. Refer to [1] below
for additional information.
- s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
[1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
property should specify atleast one voltage level (which would be a
safe operating voltage).
If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
property is specified, then all the eight voltage values for the
's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
Optional properties of the main device node (the parent!):
- s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
- s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
- s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
Additional properties required if either of the optional properties are used:
- s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
- s5m8767,pmic-buck-default-dvs-idx: Default voltage setting selected from
the possible 8 options selectable by the dvs gpios. The value of this
property should be between 0 and 7. If not specified or if out of range, the
default value of this property is set to 0.

View File

@@ -30,8 +30,7 @@ conn_reuse_mode - INTEGER
0: disable any special handling on port reuse. The new
connection will be delivered to the same real server that was
servicing the previous connection. This will effectively
disable expire_nodest_conn.
servicing the previous connection.
bit 1: enable rescheduling of new connections when it is safe.
That is, whenever expire_nodest_conn and for TCP sockets, when

View File

@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 4
PATCHLEVEL = 19
SUBLEVEL = 213
SUBLEVEL = 219
EXTRAVERSION =
NAME = "People's Front"

View File

@@ -138,8 +138,10 @@
#ifdef CONFIG_ARC_HAS_PAE40
#define PTE_BITS_NON_RWX_IN_PD1 (0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE)
#define MAX_POSSIBLE_PHYSMEM_BITS 40
#else
#define PTE_BITS_NON_RWX_IN_PD1 (PAGE_MASK | _PAGE_CACHEABLE)
#define MAX_POSSIBLE_PHYSMEM_BITS 32
#endif
/**************************************************************************

View File

@@ -73,6 +73,7 @@ config ARM
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) && (CC_IS_GCC || CLANG_VERSION >= 100000)
select HAVE_FUTEX_CMPXCHG if FUTEX
select HAVE_GCC_PLUGINS
select HAVE_GENERIC_DMA_COHERENT
select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))

View File

@@ -10,7 +10,7 @@
#
# Copyright (C) 1995-2001 by Russell King
LDFLAGS_vmlinux :=-p --no-undefined -X --pic-veneer
LDFLAGS_vmlinux := --no-undefined -X --pic-veneer
ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
LDFLAGS_vmlinux += --be8
KBUILD_LDFLAGS_MODULE += --be8
@@ -66,15 +66,15 @@ KBUILD_CFLAGS += $(call cc-option,-fno-ipa-sra)
# Note that GCC does not numerically define an architecture version
# macro, but instead defines a whole series of macros which makes
# testing for a specific architecture or later rather impossible.
arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m
arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -march=armv7-a
arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 -march=armv6
# Only override the compiler option if ARMv6. The ARMv6K extensions are
# always available in ARMv7
ifeq ($(CONFIG_CPU_32v6),y)
arch-$(CONFIG_CPU_32v6K) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
arch-$(CONFIG_CPU_32v6K) =-D__LINUX_ARM_ARCH__=6 -march=armv6k
endif
arch-$(CONFIG_CPU_32v5) =-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
arch-$(CONFIG_CPU_32v5) =-D__LINUX_ARM_ARCH__=5 -march=armv5te
arch-$(CONFIG_CPU_32v4T) =-D__LINUX_ARM_ARCH__=4 -march=armv4t
arch-$(CONFIG_CPU_32v4) =-D__LINUX_ARM_ARCH__=4 -march=armv4
arch-$(CONFIG_CPU_32v3) =-D__LINUX_ARM_ARCH__=3 -march=armv3
@@ -88,7 +88,7 @@ tune-$(CONFIG_CPU_ARM720T) =-mtune=arm7tdmi
tune-$(CONFIG_CPU_ARM740T) =-mtune=arm7tdmi
tune-$(CONFIG_CPU_ARM9TDMI) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM940T) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM946E) =$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
tune-$(CONFIG_CPU_ARM946E) =-mtune=arm9e
tune-$(CONFIG_CPU_ARM920T) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM922T) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM925T) =-mtune=arm9tdmi
@@ -96,11 +96,11 @@ tune-$(CONFIG_CPU_ARM926T) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_FA526) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_SA110) =-mtune=strongarm110
tune-$(CONFIG_CPU_SA1100) =-mtune=strongarm1100
tune-$(CONFIG_CPU_XSCALE) =$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
tune-$(CONFIG_CPU_XSC3) =$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
tune-$(CONFIG_CPU_FEROCEON) =$(call cc-option,-mtune=marvell-f,-mtune=xscale)
tune-$(CONFIG_CPU_V6) =$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
tune-$(CONFIG_CPU_V6K) =$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
tune-$(CONFIG_CPU_XSCALE) =-mtune=xscale
tune-$(CONFIG_CPU_XSC3) =-mtune=xscale
tune-$(CONFIG_CPU_FEROCEON) =-mtune=xscale
tune-$(CONFIG_CPU_V6) =-mtune=arm1136j-s
tune-$(CONFIG_CPU_V6K) =-mtune=arm1136j-s
# Evaluate tune cc-option calls now
tune-y := $(tune-y)

View File

@@ -8,7 +8,7 @@
GCOV_PROFILE := n
LDFLAGS_bootp :=-p --no-undefined -X \
LDFLAGS_bootp := --no-undefined -X \
--defsym initrd_phys=$(INITRD_PHYS) \
--defsym params_phys=$(PARAMS_PHYS) -T
AFLAGS_initrd.o :=-DINITRD=\"$(INITRD)\"

View File

@@ -133,8 +133,6 @@ endif
ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
LDFLAGS_vmlinux += --be8
endif
# ?
LDFLAGS_vmlinux += -p
# Report unresolved symbol references
LDFLAGS_vmlinux += --no-undefined
# Delete all temporary local symbols

View File

@@ -46,7 +46,10 @@ extern int memcmp(const void *cs, const void *ct, size_t count);
#endif
#ifdef CONFIG_KERNEL_XZ
/* Prevent KASAN override of string helpers in decompressor */
#undef memmove
#define memmove memmove
#undef memcpy
#define memcpy memcpy
#include "../../../../lib/decompress_unxz.c"
#endif

View File

@@ -106,7 +106,6 @@
isc: isc@f0008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
status = "okay";
};
spi0: spi@f8000000 {

View File

@@ -269,7 +269,7 @@
&macb1 {
status = "okay";
phy-mode = "rgmii";
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;

View File

@@ -239,6 +239,8 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pcie0: pcie@12000 {
@@ -384,7 +386,7 @@
i2c0: i2c@18009000 {
compatible = "brcm,iproc-i2c";
reg = <0x18009000 0x50>;
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;

View File

@@ -29,7 +29,7 @@
compatible = "smsc,lan9221","smsc,lan9115";
bank-width = <2>;
gpmc,mux-add-data;
gpmc,mux-add-data = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <42>;
gpmc,cs-wr-off-ns = <36>;

View File

@@ -364,7 +364,7 @@
compatible = "bosch,bma180";
reg = <0x41>;
pinctrl-names = "default";
pintcrl-0 = <&bma180_pins>;
pinctrl-0 = <&bma180_pins>;
interrupt-parent = <&gpio4>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
};

View File

@@ -25,7 +25,7 @@
compatible = "smsc,lan9221","smsc,lan9115";
bank-width = <2>;
gpmc,mux-add-data;
gpmc,mux-add-data = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <42>;
gpmc,cs-wr-off-ns = <36>;

View File

@@ -53,7 +53,7 @@
};
gmac: eth@e0800000 {
compatible = "st,spear600-gmac";
compatible = "snps,dwmac-3.40a";
reg = <0xe0800000 0x8000>;
interrupts = <23 22>;
interrupt-names = "macirq", "eth_wake_irq";

View File

@@ -78,6 +78,8 @@
#define PTE_HWTABLE_OFF (PTE_HWTABLE_PTRS * sizeof(pte_t))
#define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u32))
#define MAX_POSSIBLE_PHYSMEM_BITS 32
/*
* PMD_SHIFT determines the size of the area a second-level page table can map
* PGDIR_SHIFT determines what a third-level page table entry can map

View File

@@ -37,6 +37,8 @@
#define PTE_HWTABLE_OFF (0)
#define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u64))
#define MAX_POSSIBLE_PHYSMEM_BITS 40
/*
* PGDIR_SHIFT determines the size a top-level page table entry can map.
*/

View File

@@ -280,6 +280,14 @@ tlb_remove_pmd_tlb_entry(struct mmu_gather *tlb, pmd_t *pmdp, unsigned long addr
tlb_add_flush(tlb, addr);
}
static inline void
tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address,
unsigned long size)
{
tlb_add_flush(tlb, address);
tlb_add_flush(tlb, address + size - PMD_SIZE);
}
#define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr)
#define pmd_free_tlb(tlb, pmdp, addr) __pmd_free_tlb(tlb, pmdp, addr)
#define pud_free_tlb(tlb, pudp, addr) pud_free((tlb)->mm, pudp)

View File

@@ -53,8 +53,7 @@ int notrace unwind_frame(struct stackframe *frame)
frame->sp = frame->fp;
frame->fp = *(unsigned long *)(fp);
frame->pc = frame->lr;
frame->lr = *(unsigned long *)(fp + 4);
frame->pc = *(unsigned long *)(fp + 4);
#else
/* check current frame pointer is within bounds */
if (fp < low + 12 || fp > high - 4)

View File

@@ -181,7 +181,7 @@ ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE,
ASSERT((_end - __bss_start) >= 12288, ".bss too small for CONFIG_XIP_DEFLATED_DATA")
#endif
#ifdef CONFIG_ARM_MPU
#if defined(CONFIG_ARM_MPU) && !defined(CONFIG_COMPILE_TEST)
/*
* Due to PMSAv7 restriction on base address and size we have to
* enforce minimal alignment restrictions. It was seen that weaker

View File

@@ -48,7 +48,7 @@ extern void __iomem *sdr_ctl_base_addr;
u32 socfpga_sdram_self_refresh(u32 sdr_base);
extern unsigned int socfpga_sdram_self_refresh_sz;
extern char secondary_trampoline, secondary_trampoline_end;
extern char secondary_trampoline[], secondary_trampoline_end[];
extern unsigned long socfpga_cpu1start_addr;

View File

@@ -31,14 +31,14 @@
static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
int trampoline_size = secondary_trampoline_end - secondary_trampoline;
if (socfpga_cpu1start_addr) {
/* This will put CPU #1 into reset. */
writel(RSTMGR_MPUMODRST_CPU1,
rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);
writel(__pa_symbol(secondary_startup),
sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff));
@@ -56,12 +56,12 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
static int socfpga_a10_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
int trampoline_size = secondary_trampoline_end - secondary_trampoline;
if (socfpga_cpu1start_addr) {
writel(RSTMGR_MPUMODRST_CPU1, rst_manager_base_addr +
SOCFPGA_A10_RSTMGR_MODMPURST);
memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);
writel(__pa_symbol(secondary_startup),
sys_manager_base_addr + (socfpga_cpu1start_addr & 0x00000fff));

View File

@@ -751,7 +751,7 @@ config CPU_BIG_ENDIAN
config CPU_ENDIAN_BE8
bool
depends on CPU_BIG_ENDIAN
default CPU_V6 || CPU_V6K || CPU_V7
default CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M
help
Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors.

View File

@@ -416,9 +416,9 @@ void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
FIXADDR_END);
BUG_ON(idx >= __end_of_fixed_addresses);
/* we only support device mappings until pgprot_kernel has been set */
/* We support only device mappings before pgprot_kernel is set. */
if (WARN_ON(pgprot_val(prot) != pgprot_val(FIXMAP_PAGE_IO) &&
pgprot_val(pgprot_kernel) == 0))
pgprot_val(prot) && pgprot_val(pgprot_kernel) == 0))
return;
if (pgprot_val(prot))

View File

@@ -342,6 +342,7 @@ ENTRY(\name\()_cache_fns)
.macro define_tlb_functions name:req, flags_up:req, flags_smp
.type \name\()_tlb_fns, #object
.align 2
ENTRY(\name\()_tlb_fns)
.long \name\()_flush_user_tlb_range
.long \name\()_flush_kern_tlb_range

View File

@@ -542,7 +542,7 @@ static struct undef_hook kprobes_arm_break_hook = {
#endif /* !CONFIG_THUMB2_KERNEL */
int __init arch_init_kprobes()
int __init arch_init_kprobes(void)
{
arm_probes_decode_init();
#ifdef CONFIG_THUMB2_KERNEL

View File

@@ -114,7 +114,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
status = "okay";
};

View File

@@ -584,56 +584,56 @@
};
cluster1_core0_watchdog: wdt@c000000 {
compatible = "arm,sp805-wdt", "arm,primecell";
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster1_core1_watchdog: wdt@c010000 {
compatible = "arm,sp805-wdt", "arm,primecell";
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster1_core2_watchdog: wdt@c020000 {
compatible = "arm,sp805-wdt", "arm,primecell";
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc020000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster1_core3_watchdog: wdt@c030000 {
compatible = "arm,sp805-wdt", "arm,primecell";
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc030000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster2_core0_watchdog: wdt@c100000 {
compatible = "arm,sp805-wdt", "arm,primecell";
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc100000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster2_core1_watchdog: wdt@c110000 {
compatible = "arm,sp805-wdt", "arm,primecell";
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc110000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster2_core2_watchdog: wdt@c120000 {
compatible = "arm,sp805-wdt", "arm,primecell";
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc120000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster2_core3_watchdog: wdt@c130000 {
compatible = "arm,sp805-wdt", "arm,primecell";
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc130000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";

View File

@@ -222,56 +222,56 @@
};
cluster1_core0_watchdog: wdt@c000000 {
compatible = "arm,sp805-wdt", "arm,primecell";
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster1_core1_watchdog: wdt@c010000 {
compatible = "arm,sp805-wdt", "arm,primecell";
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster2_core0_watchdog: wdt@c100000 {
compatible = "arm,sp805-wdt", "arm,primecell";
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc100000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster2_core1_watchdog: wdt@c110000 {
compatible = "arm,sp805-wdt", "arm,primecell";
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc110000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster3_core0_watchdog: wdt@c200000 {
compatible = "arm,sp805-wdt", "arm,primecell";
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc200000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster3_core1_watchdog: wdt@c210000 {
compatible = "arm,sp805-wdt", "arm,primecell";
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc210000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster4_core0_watchdog: wdt@c300000 {
compatible = "arm,sp805-wdt", "arm,primecell";
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc300000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster4_core1_watchdog: wdt@c310000 {
compatible = "arm,sp805-wdt", "arm,primecell";
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc310000 0x0 0x1000>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "apb_pclk", "wdog_clk";

View File

@@ -1062,7 +1062,7 @@
};
watchdog0: watchdog@e8a06000 {
compatible = "arm,sp805-wdt", "arm,primecell";
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xe8a06000 0x0 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_OSC32K>;
@@ -1070,7 +1070,7 @@
};
watchdog1: watchdog@e8a07000 {
compatible = "arm,sp805-wdt", "arm,primecell";
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xe8a07000 0x0 0x1000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_OSC32K>;

View File

@@ -830,7 +830,7 @@
};
watchdog0: watchdog@f8005000 {
compatible = "arm,sp805-wdt", "arm,primecell";
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xf8005000 0x0 0x1000>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ao_ctrl HI6220_WDT0_PCLK>;

View File

@@ -128,6 +128,9 @@
/* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
status = "okay";
};

View File

@@ -55,6 +55,9 @@
/* J9 */
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
status = "okay";
};

View File

@@ -254,6 +254,15 @@
function = "mii";
};
pcie_reset_pins: pcie-reset-pins {
groups = "pcie1";
function = "gpio";
};
pcie_clkreq_pins: pcie-clkreq-pins {
groups = "pcie1_clkreq";
function = "pcie";
};
};
eth0: ethernet@30000 {

View File

@@ -536,7 +536,7 @@
gpu: gpu@ff300000 {
compatible = "rockchip,rk3328-mali", "arm,mali-450";
reg = <0x0 0xff300000 0x0 0x40000>;
reg = <0x0 0xff300000 0x0 0x30000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,

View File

@@ -130,7 +130,7 @@
reg = <0>;
partition@0 {
label = "data";
label = "spi0-data";
reg = <0x0 0x100000>;
};
};
@@ -148,7 +148,7 @@
reg = <0>;
partition@0 {
label = "data";
label = "spi1-data";
reg = <0x0 0x84000>;
};
};

View File

@@ -574,7 +574,7 @@
};
uart0: serial@ff000000 {
compatible = "cdns,uart-r1p12", "xlnx,xuartps";
compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 21 4>;
@@ -583,7 +583,7 @@
};
uart1: serial@ff010000 {
compatible = "cdns,uart-r1p12", "xlnx,xuartps";
compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 22 4>;

View File

@@ -491,7 +491,6 @@ CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_FORTIFY_SOURCE=y
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH=""
CONFIG_SECURITY_SELINUX=y

View File

@@ -64,9 +64,15 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
* page table entry, taking care of 52-bit addresses.
*/
#ifdef CONFIG_ARM64_PA_BITS_52
#define __pte_to_phys(pte) \
((pte_val(pte) & PTE_ADDR_LOW) | ((pte_val(pte) & PTE_ADDR_HIGH) << 36))
#define __phys_to_pte_val(phys) (((phys) | ((phys) >> 36)) & PTE_ADDR_MASK)
static inline phys_addr_t __pte_to_phys(pte_t pte)
{
return (pte_val(pte) & PTE_ADDR_LOW) |
((pte_val(pte) & PTE_ADDR_HIGH) << 36);
}
static inline pteval_t __phys_to_pte_val(phys_addr_t phys)
{
return (phys | (phys >> 36)) & PTE_ADDR_MASK;
}
#else
#define __pte_to_phys(pte) (pte_val(pte) & PTE_ADDR_MASK)
#define __phys_to_pte_val(phys) (phys)

View File

@@ -40,7 +40,8 @@ cc32-as-instr = $(call try-run,\
# As a result we set our own flags here.
# KBUILD_CPPFLAGS and NOSTDINC_FLAGS from top-level Makefile
VDSO_CPPFLAGS := -D__KERNEL__ -nostdinc -isystem $(shell $(CC_COMPAT) -print-file-name=include)
VDSO_CPPFLAGS := -D__KERNEL__ -nostdinc
VDSO_CPPFLAGS += -isystem $(shell $(CC_COMPAT) -print-file-name=include 2>/dev/null)
VDSO_CPPFLAGS += $(LINUXINCLUDE)
# Common C and assembly flags

View File

@@ -39,7 +39,7 @@
.endm
.macro ldrh1 ptr, regB, val
uao_user_alternative 9998f, ldrh, ldtrh, \ptr, \regB, \val
uao_user_alternative 9997f, ldrh, ldtrh, \ptr, \regB, \val
.endm
.macro strh1 ptr, regB, val
@@ -47,7 +47,7 @@
.endm
.macro ldr1 ptr, regB, val
uao_user_alternative 9998f, ldr, ldtr, \ptr, \regB, \val
uao_user_alternative 9997f, ldr, ldtr, \ptr, \regB, \val
.endm
.macro str1 ptr, regB, val
@@ -55,7 +55,7 @@
.endm
.macro ldp1 ptr, regB, regC, val
uao_ldp 9998f, \ptr, \regB, \regC, \val
uao_ldp 9997f, \ptr, \regB, \regC, \val
.endm
.macro stp1 ptr, regB, regC, val
@@ -63,9 +63,11 @@
.endm
end .req x5
srcin .req x15
ENTRY(__arch_copy_from_user)
uaccess_enable_not_uao x3, x4, x5
add end, x0, x2
mov srcin, x1
#include "copy_template.S"
uaccess_disable_not_uao x3, x4
mov x0, #0 // Nothing to copy
@@ -74,6 +76,11 @@ ENDPROC(__arch_copy_from_user)
.section .fixup,"ax"
.align 2
9997: cmp dst, dstin
b.ne 9998f
// Before being absolutely sure we couldn't copy anything, try harder
USER(9998f, ldtrb tmp1w, [srcin])
strb tmp1w, [dst], #1
9998: sub x0, end, dst // bytes not copied
uaccess_disable_not_uao x3, x4
ret

View File

@@ -40,34 +40,36 @@
.endm
.macro ldrh1 ptr, regB, val
uao_user_alternative 9998f, ldrh, ldtrh, \ptr, \regB, \val
uao_user_alternative 9997f, ldrh, ldtrh, \ptr, \regB, \val
.endm
.macro strh1 ptr, regB, val
uao_user_alternative 9998f, strh, sttrh, \ptr, \regB, \val
uao_user_alternative 9997f, strh, sttrh, \ptr, \regB, \val
.endm
.macro ldr1 ptr, regB, val
uao_user_alternative 9998f, ldr, ldtr, \ptr, \regB, \val
uao_user_alternative 9997f, ldr, ldtr, \ptr, \regB, \val
.endm
.macro str1 ptr, regB, val
uao_user_alternative 9998f, str, sttr, \ptr, \regB, \val
uao_user_alternative 9997f, str, sttr, \ptr, \regB, \val
.endm
.macro ldp1 ptr, regB, regC, val
uao_ldp 9998f, \ptr, \regB, \regC, \val
uao_ldp 9997f, \ptr, \regB, \regC, \val
.endm
.macro stp1 ptr, regB, regC, val
uao_stp 9998f, \ptr, \regB, \regC, \val
uao_stp 9997f, \ptr, \regB, \regC, \val
.endm
end .req x5
srcin .req x15
ENTRY(__arch_copy_in_user)
uaccess_enable_not_uao x3, x4, x5
add end, x0, x2
mov srcin, x1
#include "copy_template.S"
uaccess_disable_not_uao x3, x4
mov x0, #0
@@ -76,6 +78,12 @@ ENDPROC(__arch_copy_in_user)
.section .fixup,"ax"
.align 2
9997: cmp dst, dstin
b.ne 9998f
// Before being absolutely sure we couldn't copy anything, try harder
USER(9998f, ldtrb tmp1w, [srcin])
USER(9998f, sttrb tmp1w, [dst])
add dst, dst, #1
9998: sub x0, end, dst // bytes not copied
uaccess_disable_not_uao x3, x4
ret

View File

@@ -42,7 +42,7 @@
.endm
.macro strh1 ptr, regB, val
uao_user_alternative 9998f, strh, sttrh, \ptr, \regB, \val
uao_user_alternative 9997f, strh, sttrh, \ptr, \regB, \val
.endm
.macro ldr1 ptr, regB, val
@@ -50,7 +50,7 @@
.endm
.macro str1 ptr, regB, val
uao_user_alternative 9998f, str, sttr, \ptr, \regB, \val
uao_user_alternative 9997f, str, sttr, \ptr, \regB, \val
.endm
.macro ldp1 ptr, regB, regC, val
@@ -58,13 +58,15 @@
.endm
.macro stp1 ptr, regB, regC, val
uao_stp 9998f, \ptr, \regB, \regC, \val
uao_stp 9997f, \ptr, \regB, \regC, \val
.endm
end .req x5
srcin .req x15
ENTRY(__arch_copy_to_user)
uaccess_enable_not_uao x3, x4, x5
add end, x0, x2
mov srcin, x1
#include "copy_template.S"
uaccess_disable_not_uao x3, x4
mov x0, #0
@@ -73,6 +75,12 @@ ENDPROC(__arch_copy_to_user)
.section .fixup,"ax"
.align 2
9997: cmp dst, dstin
b.ne 9998f
// Before being absolutely sure we couldn't copy anything, try harder
ldrb tmp1w, [srcin]
USER(9998f, sttrb tmp1w, [dst])
add dst, dst, #1
9998: sub x0, end, dst // bytes not copied
uaccess_disable_not_uao x3, x4
ret

View File

@@ -40,6 +40,7 @@ void __raw_readsw(const void __iomem *addr, void *data, int len)
*dst++ = *src;
}
EXPORT_SYMBOL(__raw_readsw);
/*
* __raw_writesw - read words a short at a time
@@ -60,6 +61,7 @@ void __raw_writesw(void __iomem *addr, const void *data, int len)
}
EXPORT_SYMBOL(__raw_writesw);
/* Pretty sure len is pre-adjusted for the length of the access already */
void __raw_readsl(const void __iomem *addr, void *data, int len)
@@ -75,6 +77,7 @@ void __raw_readsl(const void __iomem *addr, void *data, int len)
}
EXPORT_SYMBOL(__raw_readsl);
void __raw_writesl(void __iomem *addr, const void *data, int len)
{
@@ -89,3 +92,4 @@ void __raw_writesl(void __iomem *addr, const void *data, int len)
}
EXPORT_SYMBOL(__raw_writesl);

View File

@@ -39,7 +39,7 @@ config DISABLE_VHPT
config IA64_DEBUG_CMPXCHG
bool "Turn on compare-and-exchange bug checking (slow!)"
depends on DEBUG_KERNEL
depends on DEBUG_KERNEL && PRINTK
help
Selecting this option turns on bug checking for the IA-64
compare-and-exchange instructions. This is slow! Itaniums

View File

@@ -268,6 +268,16 @@ __tlb_remove_tlb_entry (struct mmu_gather *tlb, pte_t *ptep, unsigned long addre
tlb->end_addr = address + PAGE_SIZE;
}
static inline void
tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address,
unsigned long size)
{
if (tlb->start_addr > address)
tlb->start_addr = address;
if (tlb->end_addr < address + size)
tlb->end_addr = address + size;
}
#define tlb_migrate_finish(mm) platform_tlb_migrate_finish(mm)
#define tlb_start_vma(tlb, vma) do { } while (0)

View File

@@ -411,7 +411,8 @@ static void kretprobe_trampoline(void)
int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
{
regs->cr_iip = __kretprobe_trampoline_handler(regs, kretprobe_trampoline, NULL);
regs->cr_iip = __kretprobe_trampoline_handler(regs,
dereference_function_descriptor(kretprobe_trampoline), NULL);
/*
* By returning a non-zero value, we are telling
* kprobe_handler() that we don't want the post_handler
@@ -427,7 +428,7 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
ri->fp = NULL;
/* Replace the return addr with trampoline addr */
regs->b0 = ((struct fnptr *)kretprobe_trampoline)->ip;
regs->b0 = (unsigned long)dereference_function_descriptor(kretprobe_trampoline);
}
/* Check the instruction in the slot is break */
@@ -957,14 +958,14 @@ static struct kprobe trampoline_p = {
int __init arch_init_kprobes(void)
{
trampoline_p.addr =
(kprobe_opcode_t *)((struct fnptr *)kretprobe_trampoline)->ip;
dereference_function_descriptor(kretprobe_trampoline);
return register_kprobe(&trampoline_p);
}
int __kprobes arch_trampoline_kprobe(struct kprobe *p)
{
if (p->addr ==
(kprobe_opcode_t *)((struct fnptr *)kretprobe_trampoline)->ip)
dereference_function_descriptor(kretprobe_trampoline))
return 1;
return 0;

View File

@@ -185,6 +185,7 @@ config INIT_LCD
config MEMORY_RESERVE
int "Memory reservation (MiB)"
depends on (UCSIMM || UCDIMM)
default 0
help
Reserve certain memory regions on 68x328 based boards.

View File

@@ -287,6 +287,9 @@ config BCM63XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_HAS_EARLY_PRINTK
select SYS_HAS_CPU_BMIPS32_3300
select SYS_HAS_CPU_BMIPS4350
select SYS_HAS_CPU_BMIPS4380
select SWAP_IO_SPACE
select GPIOLIB
select HAVE_CLK
@@ -1377,6 +1380,7 @@ config CPU_LOONGSON3
select WEAK_REORDERING_BEYOND_LLSC
select MIPS_PGD_C0_CONTEXT
select MIPS_L1_CACHE_SHIFT_6
select MIPS_FP_SUPPORT
select GPIOLIB
select SWIOTLB
help
@@ -2989,7 +2993,7 @@ config HAVE_LATENCYTOP_SUPPORT
config PGTABLE_LEVELS
int
default 4 if PAGE_SIZE_4KB && MIPS_VA_BITS_48
default 3 if 64BIT && !PAGE_SIZE_64KB
default 3 if 64BIT && (!PAGE_SIZE_64KB || MIPS_VA_BITS_48)
default 2
config MIPS_AUTO_PFN_OFFSET

View File

@@ -381,6 +381,12 @@ void clk_disable(struct clk *clk)
EXPORT_SYMBOL(clk_disable);
struct clk *clk_get_parent(struct clk *clk)
{
return NULL;
}
EXPORT_SYMBOL(clk_get_parent);
unsigned long clk_get_rate(struct clk *clk)
{
if (!clk)

View File

@@ -79,7 +79,7 @@ static unsigned int __init gen_fdt_mem_array(
__init int yamon_dt_append_memory(void *fdt,
const struct yamon_mem_region *regions)
{
unsigned long phys_memsize, memsize;
unsigned long phys_memsize = 0, memsize;
__be32 mem_array[2 * MAX_MEM_ARRAY_ENTRIES];
unsigned int mem_entries;
int i, err, mem_off;

View File

@@ -15,6 +15,7 @@
#ifndef __MIPS_ASM_MIPS_CM_H__
#define __MIPS_ASM_MIPS_CM_H__
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/errno.h>
@@ -157,8 +158,8 @@ GCR_ACCESSOR_RO(32, 0x030, rev)
#define CM_GCR_REV_MINOR GENMASK(7, 0)
#define CM_ENCODE_REV(major, minor) \
(((major) << __ffs(CM_GCR_REV_MAJOR)) | \
((minor) << __ffs(CM_GCR_REV_MINOR)))
(FIELD_PREP(CM_GCR_REV_MAJOR, major) | \
FIELD_PREP(CM_GCR_REV_MINOR, minor))
#define CM_REV_CM2 CM_ENCODE_REV(6, 0)
#define CM_REV_CM2_5 CM_ENCODE_REV(7, 0)
@@ -366,10 +367,10 @@ static inline int mips_cm_revision(void)
static inline unsigned int mips_cm_max_vp_width(void)
{
extern int smp_num_siblings;
uint32_t cfg;
if (mips_cm_revision() >= CM_REV_CM3)
return read_gcr_sys_config2() & CM_GCR_SYS_CONFIG2_MAXVPW;
return FIELD_GET(CM_GCR_SYS_CONFIG2_MAXVPW,
read_gcr_sys_config2());
if (mips_cm_present()) {
/*
@@ -377,8 +378,7 @@ static inline unsigned int mips_cm_max_vp_width(void)
* number of VP(E)s, and if that ever changes then this will
* need revisiting.
*/
cfg = read_gcr_cl_config() & CM_GCR_Cx_CONFIG_PVPE;
return (cfg >> __ffs(CM_GCR_Cx_CONFIG_PVPE)) + 1;
return FIELD_GET(CM_GCR_Cx_CONFIG_PVPE, read_gcr_cl_config()) + 1;
}
if (IS_ENABLED(CONFIG_SMP))

View File

@@ -111,6 +111,7 @@ static inline void pmd_clear(pmd_t *pmdp)
#if defined(CONFIG_XPA)
#define MAX_POSSIBLE_PHYSMEM_BITS 40
#define pte_pfn(x) (((unsigned long)((x).pte_high >> _PFN_SHIFT)) | (unsigned long)((x).pte_low << _PAGE_PRESENT_SHIFT))
static inline pte_t
pfn_pte(unsigned long pfn, pgprot_t prot)
@@ -126,6 +127,7 @@ pfn_pte(unsigned long pfn, pgprot_t prot)
#elif defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
#define MAX_POSSIBLE_PHYSMEM_BITS 36
#define pte_pfn(x) ((unsigned long)((x).pte_high >> 6))
static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
@@ -140,6 +142,7 @@ static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
#else
#define MAX_POSSIBLE_PHYSMEM_BITS 32
#ifdef CONFIG_CPU_VR41XX
#define pte_pfn(x) ((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
#define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))

View File

@@ -183,8 +183,7 @@ static void mips_cm_probe_l2sync(void)
phys_addr_t addr;
/* L2-only sync was introduced with CM major revision 6 */
major_rev = (read_gcr_rev() & CM_GCR_REV_MAJOR) >>
__ffs(CM_GCR_REV_MAJOR);
major_rev = FIELD_GET(CM_GCR_REV_MAJOR, read_gcr_rev());
if (major_rev < 6)
return;
@@ -267,13 +266,13 @@ void mips_cm_lock_other(unsigned int cluster, unsigned int core,
preempt_disable();
if (cm_rev >= CM_REV_CM3) {
val = core << __ffs(CM3_GCR_Cx_OTHER_CORE);
val |= vp << __ffs(CM3_GCR_Cx_OTHER_VP);
val = FIELD_PREP(CM3_GCR_Cx_OTHER_CORE, core) |
FIELD_PREP(CM3_GCR_Cx_OTHER_VP, vp);
if (cm_rev >= CM_REV_CM3_5) {
val |= CM_GCR_Cx_OTHER_CLUSTER_EN;
val |= cluster << __ffs(CM_GCR_Cx_OTHER_CLUSTER);
val |= block << __ffs(CM_GCR_Cx_OTHER_BLOCK);
val |= FIELD_PREP(CM_GCR_Cx_OTHER_CLUSTER, cluster);
val |= FIELD_PREP(CM_GCR_Cx_OTHER_BLOCK, block);
} else {
WARN_ON(cluster != 0);
WARN_ON(block != CM_GCR_Cx_OTHER_BLOCK_LOCAL);
@@ -303,7 +302,7 @@ void mips_cm_lock_other(unsigned int cluster, unsigned int core,
spin_lock_irqsave(&per_cpu(cm_core_lock, curr_core),
per_cpu(cm_core_lock_flags, curr_core));
val = core << __ffs(CM_GCR_Cx_OTHER_CORENUM);
val = FIELD_PREP(CM_GCR_Cx_OTHER_CORENUM, core);
}
write_gcr_cl_other(val);
@@ -347,8 +346,8 @@ void mips_cm_error_report(void)
cm_other = read_gcr_error_mult();
if (revision < CM_REV_CM3) { /* CM2 */
cause = cm_error >> __ffs(CM_GCR_ERROR_CAUSE_ERRTYPE);
ocause = cm_other >> __ffs(CM_GCR_ERROR_MULT_ERR2ND);
cause = FIELD_GET(CM_GCR_ERROR_CAUSE_ERRTYPE, cm_error);
ocause = FIELD_GET(CM_GCR_ERROR_MULT_ERR2ND, cm_other);
if (!cause)
return;
@@ -390,8 +389,8 @@ void mips_cm_error_report(void)
ulong core_id_bits, vp_id_bits, cmd_bits, cmd_group_bits;
ulong cm3_cca_bits, mcp_bits, cm3_tr_bits, sched_bit;
cause = cm_error >> __ffs64(CM3_GCR_ERROR_CAUSE_ERRTYPE);
ocause = cm_other >> __ffs(CM_GCR_ERROR_MULT_ERR2ND);
cause = FIELD_GET(CM3_GCR_ERROR_CAUSE_ERRTYPE, cm_error);
ocause = FIELD_GET(CM_GCR_ERROR_MULT_ERR2ND, cm_other);
if (!cause)
return;

View File

@@ -29,8 +29,8 @@
#define EX2(a,b) \
9: a,##b; \
.section __ex_table,"a"; \
PTR 9b,bad_stack; \
PTR 9b+4,bad_stack; \
PTR 9b,fault; \
PTR 9b+4,fault; \
.previous
.set mips1

View File

@@ -235,12 +235,3 @@ SYSCALL_DEFINE3(cachectl, char *, addr, int, nbytes, int, op)
{
return -ENOSYS;
}
/*
* If we ever come here the user sp is bad. Zap the process right away.
* Due to the bad stack signaling wouldn't work.
*/
asmlinkage void bad_stack(void)
{
do_exit(SIGSEGV);
}

View File

@@ -160,6 +160,12 @@ void clk_deactivate(struct clk *clk)
}
EXPORT_SYMBOL(clk_deactivate);
struct clk *clk_get_parent(struct clk *clk)
{
return NULL;
}
EXPORT_SYMBOL(clk_get_parent);
static inline u32 get_counter_resolution(void)
{
u32 res;

View File

@@ -22,6 +22,7 @@
#include <linux/export.h>
#include <linux/spinlock.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <lantiq_soc.h>
@@ -40,6 +41,7 @@
#define LTQ_DMA_PCTRL 0x44
#define LTQ_DMA_IRNEN 0xf4
#define DMA_ID_CHNR GENMASK(26, 20) /* channel number */
#define DMA_DESCPT BIT(3) /* descriptor complete irq */
#define DMA_TX BIT(8) /* TX channel direction */
#define DMA_CHAN_ON BIT(0) /* channel on / off bit */
@@ -50,7 +52,6 @@
#define DMA_POLL BIT(31) /* turn on channel polling */
#define DMA_CLK_DIV4 BIT(6) /* polling clock divider */
#define DMA_2W_BURST BIT(1) /* 2 word burst length */
#define DMA_MAX_CHANNEL 20 /* the soc has 20 channels */
#define DMA_ETOP_ENDIANNESS (0xf << 8) /* endianness swap etop channels */
#define DMA_WEIGHT (BIT(17) | BIT(16)) /* default channel wheight */
@@ -217,7 +218,7 @@ ltq_dma_init(struct platform_device *pdev)
{
struct clk *clk;
struct resource *res;
unsigned id;
unsigned int id, nchannels;
int i;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -233,21 +234,24 @@ ltq_dma_init(struct platform_device *pdev)
clk_enable(clk);
ltq_dma_w32_mask(0, DMA_RESET, LTQ_DMA_CTRL);
usleep_range(1, 10);
/* disable all interrupts */
ltq_dma_w32(0, LTQ_DMA_IRNEN);
/* reset/configure each channel */
for (i = 0; i < DMA_MAX_CHANNEL; i++) {
id = ltq_dma_r32(LTQ_DMA_ID);
nchannels = ((id & DMA_ID_CHNR) >> 20);
for (i = 0; i < nchannels; i++) {
ltq_dma_w32(i, LTQ_DMA_CS);
ltq_dma_w32(DMA_CHAN_RST, LTQ_DMA_CCTRL);
ltq_dma_w32(DMA_POLL | DMA_CLK_DIV4, LTQ_DMA_CPOLL);
ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL);
}
id = ltq_dma_r32(LTQ_DMA_ID);
dev_info(&pdev->dev,
"Init done - hw rev: %X, ports: %d, channels: %d\n",
id & 0x1f, (id >> 16) & 0xf, id >> 20);
id & 0x1f, (id >> 16) & 0xf, nchannels);
return 0;
}

View File

@@ -18,14 +18,14 @@ static int a20r_set_periodic(struct clock_event_device *evt)
{
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0x34;
wmb();
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV;
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV & 0xff;
wmb();
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV >> 8;
wmb();
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0xb4;
wmb();
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV;
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV & 0xff;
wmb();
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV >> 8;
wmb();

View File

@@ -22,7 +22,7 @@
static inline unsigned long arch_local_save_flags(void)
{
return RDCTL(CTL_STATUS);
return RDCTL(CTL_FSTATUS);
}
/*
@@ -31,7 +31,7 @@ static inline unsigned long arch_local_save_flags(void)
*/
static inline void arch_local_irq_restore(unsigned long flags)
{
WRCTL(CTL_STATUS, flags);
WRCTL(CTL_FSTATUS, flags);
}
static inline void arch_local_irq_disable(void)

View File

@@ -24,7 +24,7 @@
#endif
/* control register numbers */
#define CTL_STATUS 0
#define CTL_FSTATUS 0
#define CTL_ESTATUS 1
#define CTL_BSTATUS 2
#define CTL_IENABLE 3

View File

@@ -37,6 +37,7 @@ config NIOS2_DTB_PHYS_ADDR
config NIOS2_DTB_SOURCE_BOOL
bool "Compile and link device tree into kernel image"
depends on !COMPILE_TEST
default n
help
This allows you to specify a dts (device tree source) file

View File

@@ -1851,8 +1851,8 @@ syscall_restore:
LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1
/* Are we being ptraced? */
ldw TASK_FLAGS(%r1),%r19
ldi _TIF_SYSCALL_TRACE_MASK,%r2
LDREG TI_FLAGS-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r19
ldi _TIF_SINGLESTEP|_TIF_BLOCKSTEP,%r2
and,COND(=) %r19,%r2,%r0
b,n syscall_restore_rfi

View File

@@ -32,6 +32,7 @@
#include <linux/bitops.h>
#include <linux/ftrace.h>
#include <linux/cpu.h>
#include <linux/kgdb.h>
#include <linux/atomic.h>
#include <asm/current.h>
@@ -74,7 +75,10 @@ enum ipi_message_type {
IPI_CALL_FUNC,
IPI_CPU_START,
IPI_CPU_STOP,
IPI_CPU_TEST
IPI_CPU_TEST,
#ifdef CONFIG_KGDB
IPI_ENTER_KGDB,
#endif
};
@@ -170,7 +174,12 @@ ipi_interrupt(int irq, void *dev_id)
case IPI_CPU_TEST:
smp_debug(100, KERN_DEBUG "CPU%d is alive!\n", this_cpu);
break;
#ifdef CONFIG_KGDB
case IPI_ENTER_KGDB:
smp_debug(100, KERN_DEBUG "CPU%d ENTER_KGDB\n", this_cpu);
kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs());
break;
#endif
default:
printk(KERN_CRIT "Unknown IPI num on CPU%d: %lu\n",
this_cpu, which);
@@ -226,6 +235,12 @@ send_IPI_allbutself(enum ipi_message_type op)
}
}
#ifdef CONFIG_KGDB
void kgdb_roundup_cpus(void)
{
send_IPI_allbutself(IPI_ENTER_KGDB);
}
#endif
inline void
smp_send_stop(void) { send_IPI_allbutself(IPI_CPU_STOP); }

View File

@@ -21,6 +21,8 @@
#include <asm/ptrace.h>
#include <asm/unwind.h>
#include <asm/switch_to.h>
#include <asm/sections.h>
/* #define DEBUG 1 */
#ifdef DEBUG
@@ -203,6 +205,11 @@ int __init unwind_init(void)
return 0;
}
static bool pc_is_kernel_fn(unsigned long pc, void *fn)
{
return (unsigned long)dereference_kernel_function_descriptor(fn) == pc;
}
static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int frame_size)
{
/*
@@ -221,7 +228,7 @@ static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int
extern void * const _call_on_stack;
#endif /* CONFIG_IRQSTACKS */
if (pc == (unsigned long) &handle_interruption) {
if (pc_is_kernel_fn(pc, handle_interruption)) {
struct pt_regs *regs = (struct pt_regs *)(info->sp - frame_size - PT_SZ_ALGN);
dbg("Unwinding through handle_interruption()\n");
info->prev_sp = regs->gr[30];
@@ -229,13 +236,13 @@ static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int
return 1;
}
if (pc == (unsigned long) &ret_from_kernel_thread ||
pc == (unsigned long) &syscall_exit) {
if (pc_is_kernel_fn(pc, ret_from_kernel_thread) ||
pc_is_kernel_fn(pc, syscall_exit)) {
info->prev_sp = info->prev_ip = 0;
return 1;
}
if (pc == (unsigned long) &intr_return) {
if (pc_is_kernel_fn(pc, intr_return)) {
struct pt_regs *regs;
dbg("Found intr_return()\n");
@@ -246,20 +253,20 @@ static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int
return 1;
}
if (pc == (unsigned long) &_switch_to_ret) {
if (pc_is_kernel_fn(pc, _switch_to) ||
pc_is_kernel_fn(pc, _switch_to_ret)) {
info->prev_sp = info->sp - CALLEE_SAVE_FRAME_SIZE;
info->prev_ip = *(unsigned long *)(info->prev_sp - RP_OFFSET);
return 1;
}
#ifdef CONFIG_IRQSTACKS
if (pc == (unsigned long) &_call_on_stack) {
if (pc_is_kernel_fn(pc, _call_on_stack)) {
info->prev_sp = *(unsigned long *)(info->sp - FRAME_SIZE - REG_SZ);
info->prev_ip = *(unsigned long *)(info->sp - FRAME_SIZE - RP_OFFSET);
return 1;
}
#endif
return 0;
}

View File

@@ -887,9 +887,9 @@ void flush_tlb_all(void)
{
int do_recycle;
__inc_irq_stat(irq_tlb_count);
do_recycle = 0;
spin_lock(&sid_lock);
__inc_irq_stat(irq_tlb_count);
if (dirty_space_ids > RECYCLE_THRESHOLD) {
BUG_ON(recycle_inuse); /* FIXME: Use a semaphore/wait queue here */
get_dirty_sids(&recycle_ndirty,recycle_dirty_array);
@@ -908,8 +908,8 @@ void flush_tlb_all(void)
#else
void flush_tlb_all(void)
{
__inc_irq_stat(irq_tlb_count);
spin_lock(&sid_lock);
__inc_irq_stat(irq_tlb_count);
flush_tlb_all_local(NULL);
recycle_sids();
spin_unlock(&sid_lock);

View File

@@ -39,7 +39,7 @@
};
};
memory {
memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>; // 128MB
};

View File

@@ -20,7 +20,7 @@
model = "intercontrol,digsy-mtc";
compatible = "intercontrol,digsy-mtc";
memory {
memory@0 {
reg = <0x00000000 0x02000000>; // 32MB
};

View File

@@ -36,7 +36,7 @@
};
};
memory {
memory@0 {
device_type = "memory";
reg = <0x00000000 0x04000000>; // 64MB
};

View File

@@ -35,7 +35,7 @@
led4 { gpios = <&gpio_simple 2 1>; };
};
memory {
memory@0 {
reg = <0x00000000 0x10000000>; // 256MB
};

View File

@@ -36,7 +36,7 @@
};
};
memory {
memory@0 {
reg = <0x00000000 0x08000000>; // 128MB RAM
};

View File

@@ -37,7 +37,7 @@
};
};
memory: memory {
memory: memory@0 {
device_type = "memory";
reg = <0x00000000 0x04000000>; // 64MB
};

View File

@@ -16,7 +16,7 @@
model = "ifm,o2d";
compatible = "ifm,o2d";
memory {
memory@0 {
reg = <0x00000000 0x08000000>; // 128MB
};

View File

@@ -23,7 +23,7 @@
model = "ifm,o2d";
compatible = "ifm,o2d";
memory {
memory@0 {
reg = <0x00000000 0x04000000>; // 64MB
};

View File

@@ -16,7 +16,7 @@
model = "ifm,o2dnt2";
compatible = "ifm,o2d";
memory {
memory@0 {
reg = <0x00000000 0x08000000>; // 128MB
};

View File

@@ -16,7 +16,7 @@
model = "ifm,o3dnt";
compatible = "ifm,o2d";
memory {
memory@0 {
reg = <0x00000000 0x04000000>; // 64MB
};

View File

@@ -26,7 +26,7 @@
model = "phytec,pcm032";
compatible = "phytec,pcm032";
memory {
memory@0 {
reg = <0x00000000 0x08000000>; // 128MB
};

View File

@@ -36,7 +36,7 @@
};
};
memory {
memory@0 {
device_type = "memory";
reg = <0x00000000 0x04000000>; // 64MB
};

View File

@@ -26,6 +26,7 @@
#define BRANCH_ABSOLUTE 0x2
bool is_offset_in_branch_range(long offset);
bool is_offset_in_cond_branch_range(long offset);
unsigned int create_branch(const unsigned int *addr,
unsigned long target, int flags);
unsigned int create_cond_branch(const unsigned int *addr,

View File

@@ -110,8 +110,10 @@ static inline bool pte_user(pte_t pte)
*/
#if defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
#define PTE_RPN_MASK (~((1ULL<<PTE_RPN_SHIFT)-1))
#define MAX_POSSIBLE_PHYSMEM_BITS 36
#else
#define PTE_RPN_MASK (~((1UL<<PTE_RPN_SHIFT)-1))
#define MAX_POSSIBLE_PHYSMEM_BITS 32
#endif
/* _PAGE_CHG_MASK masks of bits that are to be preserved across

View File

@@ -39,6 +39,11 @@ static inline bool security_ftr_enabled(unsigned long feature)
return !!(powerpc_security_features & feature);
}
#ifdef CONFIG_PPC_BOOK3S_64
enum stf_barrier_type stf_barrier_type_get(void);
#else
static inline enum stf_barrier_type stf_barrier_type_get(void) { return STF_BARRIER_NONE; }
#endif
// Features indicating support for Spectre/Meltdown mitigations

View File

@@ -248,6 +248,11 @@ static int __init handle_no_stf_barrier(char *p)
early_param("no_stf_barrier", handle_no_stf_barrier);
enum stf_barrier_type stf_barrier_type_get(void)
{
return stf_enabled_flush_types;
}
/* This is the generic flag used by other architectures */
static int __init handle_ssbd(char *p)
{

View File

@@ -243,6 +243,11 @@ bool is_offset_in_branch_range(long offset)
return (offset >= -0x2000000 && offset <= 0x1fffffc && !(offset & 0x3));
}
bool is_offset_in_cond_branch_range(long offset)
{
return offset >= -0x8000 && offset <= 0x7fff && !(offset & 0x3);
}
/*
* Helper to check if a given instruction is a conditional branch
* Derived from the conditional checks in analyse_instr()
@@ -296,7 +301,7 @@ unsigned int create_cond_branch(const unsigned int *addr,
offset = offset - (unsigned long)addr;
/* Check we can represent the target in the instruction format */
if (offset < -0x8000 || offset > 0x7FFF || offset & 0x3)
if (!is_offset_in_cond_branch_range(offset))
return 0;
/* Mask out the flags and target, so they don't step on each other. */

View File

@@ -15,6 +15,7 @@
#ifndef __ASSEMBLY__
#include <asm/types.h>
#include <asm/code-patching.h>
#ifdef PPC64_ELF_ABI_v1
#define FUNCTION_DESCR_SIZE 24
@@ -176,13 +177,26 @@
#define PPC_NEG(d, a) EMIT(PPC_INST_NEG | ___PPC_RT(d) | ___PPC_RA(a))
/* Long jump; (unconditional 'branch') */
#define PPC_JMP(dest) EMIT(PPC_INST_BRANCH | \
(((dest) - (ctx->idx * 4)) & 0x03fffffc))
#define PPC_JMP(dest) \
do { \
long offset = (long)(dest) - (ctx->idx * 4); \
if (!is_offset_in_branch_range(offset)) { \
pr_err_ratelimited("Branch offset 0x%lx (@%u) out of range\n", offset, ctx->idx); \
return -ERANGE; \
} \
EMIT(PPC_INST_BRANCH | (offset & 0x03fffffc)); \
} while (0)
/* "cond" here covers BO:BI fields. */
#define PPC_BCC_SHORT(cond, dest) EMIT(PPC_INST_BRANCH_COND | \
(((cond) & 0x3ff) << 16) | \
(((dest) - (ctx->idx * 4)) & \
0xfffc))
#define PPC_BCC_SHORT(cond, dest) \
do { \
long offset = (long)(dest) - (ctx->idx * 4); \
if (!is_offset_in_cond_branch_range(offset)) { \
pr_err_ratelimited("Conditional branch offset 0x%lx (@%u) out of range\n", offset, ctx->idx); \
return -ERANGE; \
} \
EMIT(PPC_INST_BRANCH_COND | (((cond) & 0x3ff) << 16) | (offset & 0xfffc)); \
} while (0)
/* Sign-extended 32-bit immediate load */
#define PPC_LI32(d, i) do { \
if ((int)(uintptr_t)(i) >= -32768 && \
@@ -221,11 +235,6 @@
#define PPC_FUNC_ADDR(d,i) do { PPC_LI32(d, i); } while(0)
#endif
static inline bool is_nearbranch(int offset)
{
return (offset < 32768) && (offset >= -32768);
}
/*
* The fly in the ointment of code size changing from pass to pass is
* avoided by padding the short branch case with a NOP. If code size differs
@@ -234,7 +243,7 @@ static inline bool is_nearbranch(int offset)
* state.
*/
#define PPC_BCC(cond, dest) do { \
if (is_nearbranch((dest) - (ctx->idx * 4))) { \
if (is_offset_in_cond_branch_range((long)(dest) - (ctx->idx * 4))) { \
PPC_BCC_SHORT(cond, dest); \
PPC_NOP(); \
} else { \

View File

@@ -20,18 +20,18 @@
* with our redzone usage.
*
* [ prev sp ] <-------------
* [ nv gpr save area ] 6*8 |
* [ nv gpr save area ] 5*8 |
* [ tail_call_cnt ] 8 |
* [ local_tmp_var ] 8 |
* [ local_tmp_var ] 16 |
* fp (r31) --> [ ebpf stack space ] upto 512 |
* [ frame header ] 32/112 |
* sp (r1) ---> [ stack pointer ] --------------
*/
/* for gpr non volatile registers BPG_REG_6 to 10 */
#define BPF_PPC_STACK_SAVE (6*8)
#define BPF_PPC_STACK_SAVE (5*8)
/* for bpf JIT code internal usage */
#define BPF_PPC_STACK_LOCALS 16
#define BPF_PPC_STACK_LOCALS 24
/* stack frame excluding BPF stack, ensure this is quadword aligned */
#define BPF_PPC_STACKFRAME (STACK_FRAME_MIN_SIZE + \
BPF_PPC_STACK_LOCALS + BPF_PPC_STACK_SAVE)

View File

@@ -19,6 +19,7 @@
#include <linux/if_vlan.h>
#include <asm/kprobes.h>
#include <linux/bpf.h>
#include <asm/security_features.h>
#include "bpf_jit64.h"
@@ -60,9 +61,9 @@ static inline bool bpf_has_stack_frame(struct codegen_context *ctx)
* [ prev sp ] <-------------
* [ ... ] |
* sp (r1) ---> [ stack pointer ] --------------
* [ nv gpr save area ] 6*8
* [ nv gpr save area ] 5*8
* [ tail_call_cnt ] 8
* [ local_tmp_var ] 8
* [ local_tmp_var ] 16
* [ unused red zone ] 208 bytes protected
*/
static int bpf_jit_stack_local(struct codegen_context *ctx)
@@ -70,12 +71,12 @@ static int bpf_jit_stack_local(struct codegen_context *ctx)
if (bpf_has_stack_frame(ctx))
return STACK_FRAME_MIN_SIZE + ctx->stack_size;
else
return -(BPF_PPC_STACK_SAVE + 16);
return -(BPF_PPC_STACK_SAVE + 24);
}
static int bpf_jit_stack_tailcallcnt(struct codegen_context *ctx)
{
return bpf_jit_stack_local(ctx) + 8;
return bpf_jit_stack_local(ctx) + 16;
}
static int bpf_jit_stack_offsetof(struct codegen_context *ctx, int reg)
@@ -202,7 +203,7 @@ static void bpf_jit_emit_func_call(u32 *image, struct codegen_context *ctx, u64
PPC_BLRL();
}
static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32 out)
static int bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32 out)
{
/*
* By now, the eBPF program has already setup parameters in r3, r4 and r5
@@ -263,17 +264,42 @@ static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32
bpf_jit_emit_common_epilogue(image, ctx);
PPC_BCTR();
/* out: */
return 0;
}
/*
* We spill into the redzone always, even if the bpf program has its own stackframe.
* Offsets hardcoded based on BPF_PPC_STACK_SAVE -- see bpf_jit_stack_local()
*/
void bpf_stf_barrier(void);
asm (
" .global bpf_stf_barrier ;"
" bpf_stf_barrier: ;"
" std 21,-64(1) ;"
" std 22,-56(1) ;"
" sync ;"
" ld 21,-64(1) ;"
" ld 22,-56(1) ;"
" ori 31,31,0 ;"
" .rept 14 ;"
" b 1f ;"
" 1: ;"
" .endr ;"
" blr ;"
);
/* Assemble the body code between the prologue & epilogue */
static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
struct codegen_context *ctx,
u32 *addrs, bool extra_pass)
{
enum stf_barrier_type stf_barrier = stf_barrier_type_get();
const struct bpf_insn *insn = fp->insnsi;
int flen = fp->len;
int i;
int i, ret;
/* Start of epilogue code - will only be valid 2nd pass onwards */
u32 exit_addr = addrs[flen];
@@ -324,18 +350,25 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
PPC_SUB(dst_reg, dst_reg, src_reg);
goto bpf_alu32_trunc;
case BPF_ALU | BPF_ADD | BPF_K: /* (u32) dst += (u32) imm */
case BPF_ALU | BPF_SUB | BPF_K: /* (u32) dst -= (u32) imm */
case BPF_ALU64 | BPF_ADD | BPF_K: /* dst += imm */
if (!imm) {
goto bpf_alu32_trunc;
} else if (imm >= -32768 && imm < 32768) {
PPC_ADDI(dst_reg, dst_reg, IMM_L(imm));
} else {
PPC_LI32(b2p[TMP_REG_1], imm);
PPC_ADD(dst_reg, dst_reg, b2p[TMP_REG_1]);
}
goto bpf_alu32_trunc;
case BPF_ALU | BPF_SUB | BPF_K: /* (u32) dst -= (u32) imm */
case BPF_ALU64 | BPF_SUB | BPF_K: /* dst -= imm */
if (BPF_OP(code) == BPF_SUB)
imm = -imm;
if (imm) {
if (imm >= -32768 && imm < 32768)
PPC_ADDI(dst_reg, dst_reg, IMM_L(imm));
else {
PPC_LI32(b2p[TMP_REG_1], imm);
PPC_ADD(dst_reg, dst_reg, b2p[TMP_REG_1]);
}
if (!imm) {
goto bpf_alu32_trunc;
} else if (imm > -32768 && imm <= 32768) {
PPC_ADDI(dst_reg, dst_reg, IMM_L(-imm));
} else {
PPC_LI32(b2p[TMP_REG_1], imm);
PPC_SUB(dst_reg, dst_reg, b2p[TMP_REG_1]);
}
goto bpf_alu32_trunc;
case BPF_ALU | BPF_MUL | BPF_X: /* (u32) dst *= (u32) src */
@@ -385,8 +418,14 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
case BPF_ALU64 | BPF_DIV | BPF_K: /* dst /= imm */
if (imm == 0)
return -EINVAL;
else if (imm == 1)
goto bpf_alu32_trunc;
if (imm == 1) {
if (BPF_OP(code) == BPF_DIV) {
goto bpf_alu32_trunc;
} else {
PPC_LI(dst_reg, 0);
break;
}
}
PPC_LI32(b2p[TMP_REG_1], imm);
switch (BPF_CLASS(code)) {
@@ -600,6 +639,30 @@ emit_clear:
* BPF_ST NOSPEC (speculation barrier)
*/
case BPF_ST | BPF_NOSPEC:
if (!security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) ||
(!security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR) &&
(!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) || !cpu_has_feature(CPU_FTR_HVMODE))))
break;
switch (stf_barrier) {
case STF_BARRIER_EIEIO:
EMIT(0x7c0006ac | 0x02000000);
break;
case STF_BARRIER_SYNC_ORI:
EMIT(PPC_INST_SYNC);
PPC_LD(b2p[TMP_REG_1], 13, 0);
PPC_ORI(31, 31, 0);
break;
case STF_BARRIER_FALLBACK:
EMIT(PPC_INST_MFLR | ___PPC_RT(b2p[TMP_REG_1]));
PPC_LI64(12, dereference_kernel_function_descriptor(bpf_stf_barrier));
PPC_MTCTR(12);
EMIT(PPC_INST_BCTR | 0x1);
PPC_MTLR(b2p[TMP_REG_1]);
break;
case STF_BARRIER_NONE:
break;
}
break;
/*
@@ -857,7 +920,9 @@ cond_branch:
*/
case BPF_JMP | BPF_TAIL_CALL:
ctx->seen |= SEEN_TAILCALL;
bpf_jit_emit_tail_call(image, ctx, addrs[i + 1]);
ret = bpf_jit_emit_tail_call(image, ctx, addrs[i + 1]);
if (ret < 0)
return ret;
break;
default:

View File

@@ -98,9 +98,8 @@ int __init mpc85xx_setup_pmc(void)
pr_err("Could not map guts node address\n");
return -ENOMEM;
}
qoriq_pm_ops = &mpc85xx_pm_ops;
}
qoriq_pm_ops = &mpc85xx_pm_ops;
return 0;
}

View File

@@ -15,7 +15,7 @@
#include <asm/export.h>
#define DCR_ACCESS_PROLOG(table) \
cmpli cr0,r3,1024; \
cmplwi cr0,r3,1024; \
rlwinm r3,r3,4,18,27; \
lis r5,table@h; \
ori r5,r5,table@l; \

View File

@@ -22,4 +22,6 @@
#define PGDIR_SIZE (_AC(1, UL) << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE - 1))
#define MAX_POSSIBLE_PHYSMEM_BITS 34
#endif /* _ASM_RISCV_PGTABLE_32_H */

View File

@@ -116,6 +116,20 @@ static inline void tlb_remove_page_size(struct mmu_gather *tlb,
return tlb_remove_page(tlb, page);
}
static inline void tlb_flush_pmd_range(struct mmu_gather *tlb,
unsigned long address, unsigned long size)
{
/*
* the range might exceed the original range that was provided to
* tlb_gather_mmu(), so we need to update it despite the fact it is
* usually not updated.
*/
if (tlb->start > address)
tlb->start = address;
if (tlb->end < address + size)
tlb->end = address + size;
}
/*
* pte_free_tlb frees a pte table and clears the CRSTE for the
* page table from the tlb.
@@ -177,6 +191,8 @@ static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud,
#define tlb_remove_tlb_entry(tlb, ptep, addr) do { } while (0)
#define tlb_remove_pmd_tlb_entry(tlb, pmdp, addr) do { } while (0)
#define tlb_migrate_finish(mm) do { } while (0)
#define tlb_flush_pmd_range(tlb, addr, sz) do { } while (0)
#define tlb_remove_huge_tlb_entry(h, tlb, ptep, address) \
tlb_remove_tlb_entry(tlb, ptep, address)

View File

@@ -397,6 +397,8 @@ static int handle_sske(struct kvm_vcpu *vcpu)
up_read(&current->mm->mmap_sem);
if (rc == -EFAULT)
return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
if (rc == -EAGAIN)
continue;
if (rc < 0)
return rc;
start += PAGE_SIZE;

View File

@@ -684,9 +684,10 @@ void __gmap_zap(struct gmap *gmap, unsigned long gaddr)
vmaddr |= gaddr & ~PMD_MASK;
/* Get pointer to the page table entry */
ptep = get_locked_pte(gmap->mm, vmaddr, &ptl);
if (likely(ptep))
if (likely(ptep)) {
ptep_zap_unused(gmap->mm, vmaddr, ptep, 0);
pte_unmap_unlock(ptep, ptl);
pte_unmap_unlock(ptep, ptl);
}
}
}
EXPORT_SYMBOL_GPL(__gmap_zap);

View File

@@ -970,6 +970,7 @@ EXPORT_SYMBOL(get_guest_storage_key);
int pgste_perform_essa(struct mm_struct *mm, unsigned long hva, int orc,
unsigned long *oldpte, unsigned long *oldpgste)
{
struct vm_area_struct *vma;
unsigned long pgstev;
spinlock_t *ptl;
pgste_t pgste;
@@ -979,6 +980,10 @@ int pgste_perform_essa(struct mm_struct *mm, unsigned long hva, int orc,
WARN_ON_ONCE(orc > ESSA_MAX);
if (unlikely(orc > ESSA_MAX))
return -EINVAL;
vma = find_vma(mm, hva);
if (!vma || hva < vma->vm_start || is_vm_hugetlb_page(vma))
return -EFAULT;
ptep = get_locked_pte(mm, hva, &ptl);
if (unlikely(!ptep))
return -EFAULT;
@@ -1071,10 +1076,14 @@ EXPORT_SYMBOL(pgste_perform_essa);
int set_pgste_bits(struct mm_struct *mm, unsigned long hva,
unsigned long bits, unsigned long value)
{
struct vm_area_struct *vma;
spinlock_t *ptl;
pgste_t new;
pte_t *ptep;
vma = find_vma(mm, hva);
if (!vma || hva < vma->vm_start || is_vm_hugetlb_page(vma))
return -EFAULT;
ptep = get_locked_pte(mm, hva, &ptl);
if (unlikely(!ptep))
return -EFAULT;
@@ -1099,9 +1108,13 @@ EXPORT_SYMBOL(set_pgste_bits);
*/
int get_pgste(struct mm_struct *mm, unsigned long hva, unsigned long *pgstep)
{
struct vm_area_struct *vma;
spinlock_t *ptl;
pte_t *ptep;
vma = find_vma(mm, hva);
if (!vma || hva < vma->vm_start || is_vm_hugetlb_page(vma))
return -EFAULT;
ptep = get_locked_pte(mm, hva, &ptl);
if (unlikely(!ptep))
return -EFAULT;

View File

@@ -58,6 +58,7 @@ config DUMP_CODE
config DWARF_UNWINDER
bool "Enable the DWARF unwinder for stacktraces"
depends on DEBUG_KERNEL
select FRAME_POINTER
depends on SUPERH32
default n

View File

@@ -25,6 +25,14 @@
#ifndef _SFP_MACHINE_H
#define _SFP_MACHINE_H
#ifdef __BIG_ENDIAN__
#define __BYTE_ORDER __BIG_ENDIAN
#define __LITTLE_ENDIAN 0
#else
#define __BYTE_ORDER __LITTLE_ENDIAN
#define __BIG_ENDIAN 0
#endif
#define _FP_W_TYPE_SIZE 32
#define _FP_W_TYPE unsigned long
#define _FP_WS_TYPE signed long

View File

@@ -127,6 +127,16 @@ static inline void tlb_remove_page_size(struct mmu_gather *tlb,
return tlb_remove_page(tlb, page);
}
static inline void
tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address,
unsigned long size)
{
if (tlb->start > address)
tlb->start = address;
if (tlb->end < address + size)
tlb->end = address + size;
}
#define tlb_remove_check_page_size_change tlb_remove_check_page_size_change
static inline void tlb_remove_check_page_size_change(struct mmu_gather *tlb,
unsigned int page_size)

View File

@@ -76,8 +76,9 @@ static void shx3_prepare_cpus(unsigned int max_cpus)
BUILD_BUG_ON(SMP_MSG_NR >= 8);
for (i = 0; i < SMP_MSG_NR; i++)
request_irq(104 + i, ipi_interrupt_handler,
IRQF_PERCPU, "IPI", (void *)(long)i);
if (request_irq(104 + i, ipi_interrupt_handler,
IRQF_PERCPU, "IPI", (void *)(long)i))
pr_err("Failed to request irq %d\n", i);
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);

Some files were not shown because too many files have changed in this diff Show More