kernel_xiaomi_raphael

Evolution-X-Devices/kernel_xiaomi_raphael
Files
UtsavBalar1231 27639feb73 Merge remote-tracking branch 'origin/LE.UM.4.2.1.r1.3' into LE.UM.4.2.1.r1-02600-QCS404.0
* origin/LE.UM.4.2.1.r1.3:
  techpack: allow building data-kernel module
  qcacld-3.0: Handle tx_power_level under radio stat
  Fix for display suspend resume crash
  regulator: cpr3-regulator: Add support for sdm660
  Revert "ARM: dts: msm: fix NFC device probe issue for sdm660"
  ARM: dts: msm: Update the PM660 GPIO definitions
  clk: qcom: Restore dsi pll clk names for sdm660
  smcinvoke : Add locking to shared variables
  ARM: decompressor: avoid speculative prefetch from protected regions
  msm: sps: Fix the SPS_DBG macro definitions
  power: qpnp-smb2: Force power-role to UFP by default
  input: touchscreen: add raydium touch driver
  ARM: dts: msm: enable xbl boot loading for IPA FW on sdxprairie
  ARM: dts: msm: remove qcom_seecom node for qcs404
  defconfig: sa8155: Enable preempt and rcu debugging configs
  mhi: cntrl: qcom: expand debug modes for new device bringup
  msm: pcie: add sa8195 pci device id support
  msm: npu: Add support to get firmware capabilities
  defconfig: sa2150p: remove cnss driver from build
  ARM: dts: msm: Add qcom_gadget node for SA515M
  ARM: dts: ipc: Change sound card name
  crypto: msm: make qcrypto and qcedev independent of DEBUG_FS
  msm: npu: Allow context switch after processing IPC message
  ARM: dts: msm: remove DP pinctrl from sa6155, sa8155 and sa8195p
  msm: mhi_dev: Fix maximum number of HW channels
  msm: mhi_dev: Remove MHI hardware channel to IPA GSI mapping
  ARM: dts: msm: remove 2nd DP and eDP from sa8195p
  ARM: DTS: msm: Update DP PLL string for SDM660
  clk: qcom: mdss: DP PLL changes for SDM660
  net: stmmac: handle dma fatal irq for IPA channels
  power: qpnp-fg-gen3: Silence an instance of -Wsizeof-array-div in clear_cycle_counter
  defconfig: qti-quin-gvm: Enable virtualized FastRPC on GVM
  driver: boot_marker: enable bootloader log mount
  defconfig: Minimal Kernel config for qcs610
  USB: configfs: Clear deactivation flag in configfs_composite_unbind()
  msm: vidc: Check image encode capabilities
  defconfig: atoll: Enable dm-snapshot
  msm: camera: isp: variable should be accessed only if match is found
  data-kernel: EMac: S2D phase 2 changes
  defconfig: enable rmnet_data driver for wearable target
  ARM: dts: msm: config primary tdm on auto platform
  mmc: sdhci-msm: Enable EMMC_BOOT_SELECT bit
  usb: dwc3-msm: Avoid access of gsi_reg for non-GSI targets
  defconfig: sa515m: Build CNSS2 driver as loadable module
  msm_bus: fix compilation when CONFIG_DEBUG_FS is disabled
  ARM: dts: msm: Add model specific configurations for SA6155 VMs
  cnss2: Add DOMAIN_ATTR_GEOMETRY attribute support
  msm:ipa:mhi: send qmi endp_desc notification to Q6
  msm: camera: isp: Fix IRQ delay handling logic
  msm: camera: isp: Change state of all CID resource to RESERVE on deinit
  net: stmmac: Enable CRC clipping bit
  drivers: thermal: Avoid multiple TSENS controller re-init simultaneously
  mhi: netdev: Open mhi channels based on state notifications from host
  clk: fix compilation when CONFIG_DEBUG_FS is disabled
  ARM: dts: msm: Add property iommu-geometry for CNSS
  Revert "binder: implement binderfs"
  msm: vidc_3x: correct ion flags for CP_CAMERA_ENCODE context bank
  ARM: dts: msm: Fix mistaken description for pcie1&3 on sa8195p
  defconfig: msm: veth: Add Veth configs
  mhi: fix compilation when CONFIG_DEBUG_FS is disabled
  debugfs: Fix !DEBUG_FS debugfs_create_automount
  ufs: fix compilation when CONFIG_DEBUG_FS is disabled
  tsens: fix compilation when CONFIG_DEBUG_FS is disabled
  gsi: fix compilation when CONFIG_DEBUG_FS is disabled
  msm: ipa: Fix compilation errors when DEBUG_FS is disabled
  hdcp_qseecom: Maintain repeater_flag appropriately
  ARM: dts: msm: support to enable CRC using DTS
  ARM: dts: msm: Add always-on flag for L12A on sa8195
  diag: dci: Synchronize dci mempool buffers alloc and free
  msm: vidc_3x: Add new video driver to support CMA buffers
  dt: sm8155: Change copyright year in DT file
  msm: vidc_3x: Add changes to read video CMA configuration information
  mm/memblock.c: fix bug in early_dyn_memhotplug
  ARM: dts: qcom: Include PM660 dtsi for SDA429
  ARM: msm: dts: Enable sdp check timer for sdm429
  char: virtio_fastrpc: Fix compile warning
  phy-msm-usb: Perform sdp_check for SDP charger as well
  msm: vidc_3x: populate sid list for each context bank
  qrtr: usb_dev: Fix kthread usage
  iommu: iommu-debug: Fix the return string
  ARM: dts: msm: Enable PDC support for VM targets
  fw-api: CL 10441255 - update fw common interface files
  fw-api: CL 10438420 - update fw common interface files
  fw-api: CL 10437857 - update fw common interface files
  fw-api: CL 10407957 - update fw common interface files
  fw-api: CL 10402317 - update fw common interface files
  fw-api: CL 10382552 - update fw common interface files
  fw-api: CL 10372014 - update fw common interface files
  fw-api: CL 10366568 - update fw common interface files
  fw-api: CL 10356226 - update fw common interface files
  msm: ipa: update check flags to handle CONFIG_DEBUG_FS
  arm64: defconfig: Add IPA configs
  Release 5.2.03.26T
  ARM: dts: msm: Add IPA device configuration for SA8155
  ARM: dts: msm: Fix cx_cdev label size for MDM9607
  clk: qcom: mdss: add dsi phy 12nm clock
  ARM: dts: msm: Add default thermal zone rules for MDM9607
  ARM: dts: msm: Add regulator cooling device for MDM9607
  usb: dwc3: gadget: Block GSI DB update after END transfer on all EPs
  qcacld-3.0: Delete older PMK of all APs which have the same PMK
  ARM: dts: msm: Add qcom_gadget node for sdxprairie
  msm: npu: Continue npu_probe() when !DEBUG_FS
  qcom: qpnp-fg-gen4: Continue fg_gen4_probe() when !DEBUG_FS
  diag: Check for valid PCIe device
  Release 5.2.03.26S
  qcacld-3.0: Disable BTM offload to fw if a peer doesn't support PMF
  init: Remove modem mounting from kernel
  ARM: dts: msm: Add eMMC, SD card support on sdm429w
  msm: adsprpc: Put upper limit on IOMMU mapping size
  ARM: dts: msm: Add QMI cooling devices for MDM9607
  soc: swr-mstr: Add delay between fifo writes to avoid overflow/underflow
  asoc: wcd937x: Update retry logic for SWR logical addr
  soc: qcom: Increase bootmarker read buffer
  qcacld-3.0: Don't send disassoc frame to fw in case of HO failure
  diag: Initialize local variables
  mhi: core: Read transfer length from an event properly
  msm: vidc_3x: Add CMA support for video hardware
  ARM: dts: msm: Enable RTB for sdmshrike
  soc: qcom: Remove redundant bootstats
  defconfig: Add required configs for USB
  kernel: sysctl: make drop_caches write-only
  ARM: dts: msm: enable POMS on TD4330 cmd panel for trinket
  ARM: dts: msm: enable POMS on TD4330 panel for trinket
  ARM: dts: msm: Add secure display ion heap for GVMs
  ARM: dts: msm: Add BLSP DTSI nodes on sdm429
  ARM: dts: msm: Add DTS to support eMMC
  defconfig: msm: Add defconfig files for SA2150P-NAND
  Release 5.2.03.26R
  ARM: dts: msm: Add ATEML touch support for atoll target
  input: touchscreen: Add support for kernel command line parsing
  ARM: dts: msm: Enable constant fps feature for atoll CPhy panel
  disp: msm: dsi: refine the logic for mode filling and calculation
  disp: msm: dsi: add panel mode restriction for DFPS and RFI
  drm: msm: dsi-staging: CPhy constant fps porch calculation
  qcacld-3.0: drop frames in the RX thread queue during peer unmap
  defconfig: sdm429w: Add support for DEBUGCC for SDM429W
  msm: mhi_dev: Avoid re-alloc of netdev interface
  defconfig: msm: Thermal Enabled on mdm9607 target
  msm: ais: Fix powerup sequence in cam driver
  defconfig: sdm429-bg: Enable CPR, MEM-ACC, Haptics configs
  msm: v4l2loopback: to create V4L2 loopback devices
  msm:ipa:change IPA client mapping for mhi protocol
  sm8150: dt: sm8150-slpi-pinctrl: Typo mistake in gpio
  binder: implement binderfs
  msm: mhi_dev: Add proper check before accessing variable
  Revert "ARM: dts: msm: Add cmd mode panel support for SDM660 MTP"
  msm: veth_ipa: Introduce front end network driver
  net: stmmac: Ethtool half duplex not supported
  ARM: dts: msm: Add the CPR regulator node for SDM429w
  defconfig: sdmsteppe: Enable USB_VIDEO_CLASS
  Release 5.2.03.26Q
  defconfig: sdm429: Add MPROC defconfig for SDM429W
  ARM: dts: msm: add new HAB physical channels for DATA_NETWORK and HSI2S
  ARM: dts: qcom: Add MPROC device nodes for sdm429w
  qcacld-3.0: Avoid peer access after peer deletion
  PM / hibernate: Make passing hibernate offsets more friendly
  usb: dwc3-msm: Keep wakeup IRQs disabled for automotive platforms
  power: smb1398: Update the max-ilim current settings
  irqchip: qcom: pdc: Add a kernel config for pdc save/restore feature
  defconfig: msm: Enable PDC_VIRT on Quin GVM platform
  irqchip: qcom: pdc: Add support for pdc-virt
  clk: qcom: gcc-sdm429w: Update plls for SDM429W
  net: stmmac: Fixed ethool speed issue
  ARM: dts: msm: Add pcie1~3 support for sa8195 virtual machine
  clk: qcom: debugcc-sdm429w: Update debugcc Kconfig
  defconfig: sdm429: Enable BLSP, SLIMBUS driver defconfig
  ARM: dts: msm: Add SPS node for sdm429
  USB: phy: msm: Check for PHY reset handle also
  ARM: dts: msm: Add USB device nodes for sdm429
  clk: qcom: Add pcie1~3 virtio clocks for sa8195p
  uapi: add ADM_AUDPROC_PERSISTENT cal type
  ARM: dts: msm: Disable shared display on DP display sa8195
  Release 5.2.03.26P
  qcacld-3.0: Update OFDM and CCK flags for packet capture mode
  Release 5.2.03.26O
  qcacld-3.0: Copy peer and radio stats correctly
  qcacld-3.0: Handle LL stats for 2nd radio
  qcacld-3.0: Return LL stats resp in caller context
  diag: Save the correct task pointer while registering dci client
  qcacmn: Mark SRD channels conditionally passive
  ARM: dts: msm: Enable constant fps feature
  drm/msm/dsi-staging: Fix porch calculation issue for constant fps
  soc: qcom: hab: add some physical channels in HAB driver
  net: stmmac: Free IPA queue memory on netdev close
  power: smb1398: Fix SOC based SMB enable condition
  emac: emac RXC clock warning
  Release 5.2.03.26N
  ARM: dts: msm: EMAC phy hw reset delay timer
  driver: input: sensors: Increase the smi130 accel buffer samples size
  qcacld-3.0: Do not enable STA roaming if any NDI connection is active
  defconfig: sm8150: Enable dm-snapshot
  defconfig: sdmsteppe: Enable dm-snapshot
  net: stmmac: Set IOC for every TSO last desc
  fw-api: Define DEST_RING_CONSUMER_PREFET_TIMER macro for qca6750
  mhi: core: Fix out of bound channel id handling
  mhi: core: improve bandwidth switch events processing
  fw-api: CL 10334178 - update fw common interface files
  spi: spi-qcom-geni: Add error interrupt handling in spi driver
  ASoC: audio-ext-clk: Add pmi clk support for tasha
  ARM: dts: msm: Tasha snd node changes for sdm660
  fw-api: CL 10322687 - update fw common interface files
  fw-api: CL 10320987 - update fw common interface files
  Release 5.2.03.26M
  ARM: dts: msm: Disable shared display on DP display sa8155
  ARM: dts: msm: Disable shared display on DP display sa6155
  fw-api: CL 10317768 - update fw common interface files
  qcacld-3.0: Prevent RSO stop sent after vdev down
  fw-api: CL 10308469 - update fw common interface files
  Release 5.2.03.26L
  qcacld-3.0: Send PER config command before WMI_ROAM_SCAN_MODE command
  Release 5.2.03.26K
  qcacld-3.0: Lock all the entry of ch power info
  drivers: rmnet: shs: Add oom handler
  fw-api: CL 10295227 - update fw common interface files
  dsp: q6adm: Update the proper param_hdr for offset
  Revert "ASoC: Add Voice over pcie support"
  msm: mdss: add support to handle LP_RX_TO/BTA_TO errors for DSI 12nm PHY
  msm: mdss: perform DSI PHY s/w reset for 12nm PHY during unblank
  msm: mdss: update the MDSS DSI ULPS exit sequence
  msm: mdss: add support to program of HSTX drivers for DSI 12nm PHY
  msm: mdss: update DSI ULPS entry/exit sequence
  fw-api: CL 10270542 - update fw common interface files
  qcom: spmi-wled: Wait for OVPs before disable module
  ion: msm: Restrict VMID_CP_CAMERA_ENCODE to read only
  msm: vidc_3x: correct ion flags for CP_CAMERA_ENCODE context bank
  fw-api: CL 10262355 - update fw common interface files
  msm: vidc_3x: Add new video driver to support CMA buffers
  msm: vidc_3x: Add changes to read video CMA configuration information
  msm: vidc_3x: populate sid list for each context bank
  msm: vidc_3x: Add CMA support for video hardware
  drivers: net: can:Threshold update for time offset
  smcinvoke: Add suspend resume support
  SMCInvoke: Process requests for active clients
  msm: mdss: add support for DSI 12nm PHY in DSI driver
  drivers: rmnet: shs: add segmentation levels for slow start flows
  msm: vidc: Fix DCVS enablement
  vidc_3x: Fix qbuf error in gralloc buffers encoding
  data-kernel: EMAC: Change defualt value for phy reset delays.
  ARM: dts: msm: EMAC phy hw reset delay timer
  ARM: dts: msm: Disable minidump-id for Modem on SDM660
  autoconf: Enable legacy avtimer for sdm660
  diag: Add protection while accessing diag client map
  Revert "drivers: usb: gadget: Change gbam setup usage in rmnet function"
  ARM: dts: msm: EMAC phy hw reset delay timer
  ARM: dts: msm: EMAC phy hw reset delay timer
  data-kernel: EMAC: read phy hw reset delay time from dtsi
  bolero: tx-macro: Fix audio distortion during amic record
  va-macro: Add autosuspend after pm_runtime_get_sync
  qcacmn: Update the mc timer state after its deleted
  qcacld-3.0: Fix while condition in rrm_fill_beacon_ies()
  asoc: codecs: avoid crash after diconnecting DP cable
  mhi: core: move certain logs to controller log buffer
  mhi: cntrl: qcom: move certain logs to controller log buffer
  mhi: cntrl: qcom: reduce timesync and bootlogger log buffer size
  mhi: cntrl: qcom: add support for controller ipc logs
  cnss2: add support for controller IPC logs
  mhi: core: add log buffer for controller bootup and shutdown
  audio-kernel: Rename hw vote rsc to digital cdc rsc mgr
  msm: ipa2: Add change to fix ipa padding
  ARM: dts: msm: Update ADC_TM compatible field for PM660
  bindings: thermal: Add compatible field for PMIC4 ADC_TM
  thermal: adc_tm: Update support for PMIC4 ADC_TM
  asoc: add new path for in call recording
  audio-kernel: Synchronize hw vote and unvote requests
  asoc: sm8150: add proxy ports for call screening in machine driver
  ARM: dts: msm: Removing quiet-therm-step node
  vidc_3x: Query Entropy property only for H264 format
  asoc: add code change for pseudo playback and capture BE DAIs.
  ASoC: Add Voice over pcie support
  defconfig: arm64: msm: Enable USB RMNET & RNDIS using IPA over BAM2BAM
  usb: gadget: f_qc_rndis: Add RNDIS support using IPA over BAM2BAM
  fbdev: msm: fix merge errors in DP
  Revert "defconfig: arm64: msm: Enable USB RMNET & RNDIS using IPA over BAM2BAM"
  ARM: dts: msm: Add rpm-smd irq number for SDM660
  ARM: dts: msm: Update msm_ext_disp string
  autoconf: Enable leagay avtimer for sdm660
  defconfig: arm64: msm: Enable USB RMNET & RNDIS using IPA over BAM2BAM
  msm: ipa: Add low-level IPA client support
  Fixing compilation failures
  uapi/media: Fix buffer size issue for NV12_UBWC.
  soc: qcom: boot_stats: Add display boot KPI
  pfk: Fixed ICE slot number for bare metal
  clk: qcom: parents need enable during set rate for SDM660
  HID: core: add usage_page_preceding flag for hid_concatenate_usage_page().
  vidc_3x: Fix HFR recording issue.
  fbdev: msm: Use dynamic allocation for SID variable.
  Revert "fbdev: msm: disable sec display".
  ARM: dts: msm: modified interrupt interrupt type for smmu
  arm64: defconfig: Add IPA realted configs
  msm: ipa: Add Kconfig changes of IPA2 driver
  ARM: dts: msm: Add compatible rmnet version for ipa2
  msm: ipa2: Add changes compatible to kernel-4.14
  msm: ipa: Add support of IPA2 driver
  msm: Disable CSID virtualization and fix SID switching for SDM660
  defconfig: msm: Enable coresight replicator, qpdi for SDM660
  coresight: add qpdi driver support in upstream implementation
  ARM: dts: msm: coresight support for SDM660
  coresight: replicator: Add CoreSight Replicator driver
  msm: vidc: Re-calculate buffer requirement
  fbdev: msm: disable sec display
  ARM: dts: msm: fix NFC device probe issue for sdm660
  msm: fbdev: dp: Add dp intf to codec ops
  ARM: dts: msm: Add default thermal zone rules for SDM660
  media: v4l2-ctrls: Add missing entry in header_mode
  msm: vidc: Fix v4l2 format warnings
  ARM: dts: msm: Update WLED configuration for sdm660
  qcacld-3.0: Possible OOB write in rrm_process_radio_measurement_request
  fixing compilation issue
  msm: vidc_3x: Add partial cache operations support
  Revert "msm: vidc_3x: Add partial cache operations support"
  defconfig: msm: Disable CONFIG_BUILD_ARM64_APPENDED_DTB_IMAGE flag
  ARM: dts: msm: Add LPM residency for sdm660
  fbdev: msm: Remove CPU sync in dma buf unmap path
  ARM: dts: msm: Add panel changes for SDM660 QRD
  defconfig: msm: Enable DP Panel config
  msm: fbdev: dp: enable audio support over DP
  ARM: dts: msm: Update supply name for vdd cx-mx wlan rail
  mdss: fbdev: Fix fence timeout error check
  ARM: dts: msm: Add energy costs for SDM660
  ARM: dts: msm: Specify WLED configuration for sdm660 MTP
  ARM: dts: msm: Enable subsystem watchdog
  ARM: dts: msm: Enable WDSP SVA for SDM660
  ARM: dts: msm: Add TSENS in thermal_zone for SDM660
  ARM: dts: msm: Remove thermal sensor_info nodes
  defconfig: msm: Enable Thermal configs for SDM660
  ARM: dts: msm: add bcl_sensors thermal zones
  ARM: dts: msm: enable LMH DCVS driver for sdm660
  drivers: thermal: lmh_dcvs: Add support to enable legacy hardware feature
  ARM: dts: msm: add gpio_key VOL_UP button on SDM660
  ARM: dts: msm: Fix slave id for pm660l_gpio
  soc: qcom: dcc: DCC driver for SDM660
  msm: vidc_3x: Assign and pass hal buffer type to smem
  msm: vidc_3x: Add partial cache operations support
  Revert "msm: vidc_3x: disable smem_cache_operations for encoder"
  defconfig: msm: Enable DP Panel config
  msm: bus: removing warning
  clk: qcom: mdss: DSI and DP PLL changes for SDM660
  clk : qcom : Update mdss byte and pxl clk names
  fbdev: changes to enable recovery ui
  fbdev: msm: Add snapshot of mdss driver
  msm: fbdev: dp: update fbdev dp driver
  msm: fbdev: Add snapshot of DP driver
  ARM: DTS: msm: Enable 14nm DP PLL clk
  Revert "msm: mdss: dsi: Add support dual roi partial update"
  Revert "msm: mdss: add multiple partial update support"
  Revert "msm: mdss: add additional LM checks for dest scalar validation"
  Revert "fbdev: changes to enable recovery ui"
  Revert "fbdev: changes to enable recovery ui"
  usb: gadget: uvc: Update frame size as per frame type
  clk: remove workaround changes for SDM660
  ARM: dts: msm: Add dtbo support for sdm660 & sda660
  defconfig: sdm : Add configs for SDM660
  ARM: dts: msm: Add audio support for SDM660
  Revert "regulator: core: TEMP change register string size"
  ARM: dts: msm: Add cmd mode panel support for SDM660 MTP
  msm: vidc_3x: disable smem_cache_operations for encoder
  defconfig: msm: Enable CPR and FG related configs for SDM660
  drivers: irqchip: qcom: Add mpm pin data for sdm660
  defconfig: sdm : Add configs for SDM660
  ARM: dts: msm: Add MPM interrupt controller for sdm660..
  ARM: dts: msm: add support for frequency scaling for SDM660.
  Temporary commit : resolve build error.
  thermal: adc_tm: adc_init for sdm660
  ARM: dts: msm: add pmic support for SDM660
  ARM: dts: msm: Update GPU bw table for SDM660
  fbdev: changes to enable recovery ui
  iio: adc: Add DRAX_TEMP channel support
  ARM: dts: msm: Add device tree for SDM660
  ASoC: sdm660: Fix compilation issue of sdm660 drivers
  clk: qcom: Add snapshot of sdm660 clocks
  msm: vidc: remove additional checks in response_handler.
  vidc: Remove firmware_cb context bank.
  defconfig: vidc: Enable video drivers for sdm660.
  msm: vidc_3x: ION Upgrade changes for video.
  Revert "msm: vidc_3x: Add snapshot of video driver"
  Revert "msm: vidc_3x: ION Upgrade changes for video"
  Revert "vidc: Remove firmware_cb context bank"
  ARM: dts: msm: rename codec name
  mm-camera_v2: Check proper VFE h/w versions
  msm: kgsl: Change default pagetable creation sequence
  msm: kgsl: Remove workaround for GPU aperture programming
  ASoC: msm: Add support for WCD interrupt config via LPI TLMM
  Revert "ARM: dts: msm: Enable global pagetable for gpu on SDM660"
  msm: sde: Fixes to enable rotator for SDM660
  vidc: Remove firmware_cb context bank
  defconfig: msm: Enable PMIC related configs for SDM660
  defconfig: sdm : Update perf configs for SDM660
  msm: mdss: add additional LM checks for dest scalar validation
  msm: mdss: add multiple partial update support
  Audio-kernel: voice: TEMP enable voice call
  msm: mdss: dsi: Add support dual roi partial update
  Revert "vidc: Temporary change to remove secure context bank"
  Revert "BACKPORT: perf_event: Add support for LSM and SELinux checks"
  Linux 4.14.163
  perf/x86/intel/bts: Fix the use of page_private()
  xen/blkback: Avoid unmapping unmapped grant pages
  s390/smp: fix physical to logical CPU map for SMT
  net: add annotations on hh->hh_len lockless accesses
  arm64: dts: meson: odroid-c2: Disable usb_otg bus to avoid power failed warning
  ath9k_htc: Discard undersized packets
  ath9k_htc: Modify byte order for an error message
  rxrpc: Fix possible NULL pointer access in ICMP handling
  selftests: rtnetlink: add addresses with fixed life time
  powerpc/pseries/hvconsole: Fix stack overread via udbg
  drm/mst: Fix MST sideband up-reply failure handling
  scsi: qedf: Do not retry ELS request if qedf_alloc_cmd fails
  fix compat handling of FICLONERANGE, FIDEDUPERANGE and FS_IOC_FIEMAP
  tty: serial: msm_serial: Fix lockup for sysrq and oops
  dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix typo in example
  media: usb: fix memory leak in af9005_identify_state
  regulator: ab8500: Remove AB8505 USB regulator
  media: flexcop-usb: ensure -EIO is returned on error condition
  Bluetooth: Fix memory leak in hci_connect_le_scan
  Bluetooth: delete a stray unlock
  Bluetooth: btusb: fix PM leak in error case of setup
  platform/x86: pmc_atom: Add Siemens CONNECT X300 to critclk_systems DMI table
  xfs: don't check for AG deadlock for realtime files in bunmapi
  scsi: qla2xxx: Drop superfluous INIT_WORK of del_work
  nfsd4: fix up replay_matches_cache()
  PM / devfreq: Check NULL governor in available_governors_show
  arm64: Revert support for execute-only user mappings
  ftrace: Avoid potential division by zero in function profiler
  exit: panic before exit_mm() on global init exit
  ALSA: firewire-motu: Correct a typo in the clock proc string
  ALSA: cs4236: fix error return comparison of an unsigned integer
  tracing: Have the histogram compare functions convert to u64 first
  tracing: Fix lock inversion in trace_event_enable_tgid_record()
  gpiolib: fix up emulated open drain outputs
  ata: ahci_brcm: Fix AHCI resources management
  ata: ahci_brcm: Allow optional reset controller to be used
  ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys()
  compat_ioctl: block: handle BLKREPORTZONE/BLKRESETZONE
  compat_ioctl: block: handle Persistent Reservations
  dmaengine: Fix access to uninitialized dma_slave_caps
  locks: print unsigned ino in /proc/locks
  pstore/ram: Write new dumps to start of recycled zones
  memcg: account security cred as well to kmemcg
  mm/zsmalloc.c: fix the migrated zspage statistics.
  media: cec: avoid decrementing transmit_queue_sz if it is 0
  media: cec: CEC 2.0-only bcast messages were ignored
  media: pulse8-cec: fix lost cec_transmit_attempt_done() call
  MIPS: Avoid VDSO ABI breakage due to global register variable
  drm/sun4i: hdmi: Remove duplicate cleanup calls
  ALSA: ice1724: Fix sleep-in-atomic in Infrasonic Quartet support code
  drm: limit to INT_MAX in create_blob ioctl
  taskstats: fix data-race
  xfs: fix mount failure crash on invalid iclog memory access
  PM / hibernate: memory_bm_find_bit(): Tighten node optimisation
  xen/balloon: fix ballooned page accounting without hotplug enabled
  xen-blkback: prevent premature module unload
  IB/mlx4: Follow mirror sequence of device add during device removal
  s390/cpum_sf: Avoid SBD overflow condition in irq handler
  s390/cpum_sf: Adjust sampling interval to avoid hitting sample limits
  md: raid1: check rdev before reference in raid1_sync_request func
  net: make socket read/write_iter() honor IOCB_NOWAIT
  usb: gadget: fix wrong endpoint desc
  drm/nouveau: Move the declaration of struct nouveau_conn_atom up a bit
  scsi: libsas: stop discovering if oob mode is disconnected
  scsi: iscsi: qla4xxx: fix double free in probe
  scsi: qla2xxx: Don't call qlt_async_event twice
  scsi: lpfc: Fix memory leak on lpfc_bsg_write_ebuf_set func
  rxe: correctly calculate iCRC for unaligned payloads
  RDMA/cma: add missed unregister_pernet_subsys in init failure
  PM / devfreq: Don't fail devfreq_dev_release if not in list
  iio: adc: max9611: Fix too short conversion time delay
  nvme_fc: add module to ops template to allow module references
  UPSTREAM: selinux: sidtab reverse lookup hash table
  UPSTREAM: selinux: avoid atomic_t usage in sidtab
  UPSTREAM: selinux: check sidtab limit before adding a new entry
  UPSTREAM: selinux: fix context string corruption in convert_context()
  BACKPORT: selinux: overhaul sidtab to fix bug and improve performance
  UPSTREAM: selinux: refactor mls_context_to_sid() and make it stricter
  UPSTREAM: selinux: Cleanup printk logging in services
  UPSTREAM: scsi: ilog2: create truly constant version for sparse
  BACKPORT: selinux: use separate table for initial SID lookup
  UPSTREAM: selinux: make "selinux_policycap_names[]" const char *
  UPSTREAM: selinux: refactor sidtab conversion
  BACKPORT: selinux: wrap AVC state
  UPSTREAM: selinux: wrap selinuxfs state
  UPSTREAM: selinux: rename the {is,set}_enforcing() functions
  BACKPORT: selinux: wrap global selinux state
  UPSTREAM: selinux: Use kmem_cache for hashtab_node
  BACKPORT: perf_event: Add support for LSM and SELinux checks
  audio-kernel: dsp: TEMP Enable bluetooth
  ARM: dts: msm: Update lpi offset for SDM660
  ASoC: sdm660_cdc: Update mbhc reg struct for IN2P_CLAMP_STATE
  vidc: Temporary change to remove secure context bank
  UPSTREAM: binder: Add binder_proc logging to binderfs
  UPSTREAM: binder: Make transaction_log available in binderfs
  UPSTREAM: binder: Add stats, state and transactions files
  UPSTREAM: binder: add a mount option to show global stats
  UPSTREAM: binder: Validate the default binderfs device names.
  UPSTREAM: binder: Add default binder devices through binderfs when configured
  UPSTREAM: binder: fix CONFIG_ANDROID_BINDER_DEVICES
  UPSTREAM: android: binder: use kstrdup instead of open-coding it
  UPSTREAM: binderfs: remove separate device_initcall()
  BACKPORT: binderfs: respect limit on binder control creation
  UPSTREAM: binderfs: switch from d_add() to d_instantiate()
  UPSTREAM: binderfs: drop lock in binderfs_binder_ctl_create
  UPSTREAM: binderfs: kill_litter_super() before cleanup
  UPSTREAM: binderfs: rework binderfs_binder_device_create()
  UPSTREAM: binderfs: rework binderfs_fill_super()
  UPSTREAM: binderfs: prevent renaming the control dentry
  UPSTREAM: binderfs: remove outdated comment
  UPSTREAM: binderfs: fix error return code in binderfs_fill_super()
  UPSTREAM: binderfs: handle !CONFIG_IPC_NS builds
  BACKPORT: binderfs: reserve devices for initial mount
  UPSTREAM: binderfs: rename header to binderfs.h
  BACKPORT: binderfs: implement "max" mount option
  UPSTREAM: binderfs: make each binderfs mount a new instance
  UPSTREAM: binderfs: remove wrong kern_mount() call
  BACKPORT: binder: implement binderfs
  UPSTREAM: binder: remove BINDER_DEBUG_ENTRY()
  UPSTREAM: seq_file: Introduce DEFINE_SHOW_ATTRIBUTE() helper macro
  Revert "msm: camera_v2: CPP AXI reset at close".
  msm: camera: dtsi: arm camera gpio config for sdm660.
  UPSTREAM: exit: panic before exit_mm() on global init exit
  soc: qcom: Add support for SDA660 into socinfo driver
  defconfig: sdm : Add configs for SDM660
  ARM: dts: msm: Add dts for SDA660.
  ANDROID: cpufreq_interactive: remove unused variable
  ARM: dts: msm: add pmic support for SDM660
  defconfig: sdm660: Enable camera driver support
  audio-kernel: Pull in latest code changes from 4.0 branch
  msm: mdss: Remove validate layer logs
  regulator: core: TEMP change register string size
  defconfig : msm: Enable snd config on SDM660
  ARM: dts: msm: Snd node changes for sdm660
  Revert "ARM: dts: msm: Audio changes for SDM660"
  asoc: fix NULL pointer de-reference in asoc drivers.
  asoc: msm-pcm: Add mutex lock to protect prvt data
  msm: vidc_3x: ION Upgrade changes for video
  msm: vidc_3x: Add snapshot of video driver
  ARM: dts: msm: Enable icnss interrupts and configs
  dts: Add restrict-access to adsp_mem
  ARM: dts: msm: update DT entries for fastRPC on SDM660
  Merge multi rect traffic changes into kernel.lnx.4.14.r22-rel
  fbdev: msm: Add backlight class support for FB driver
  ARM: dts: msm: Audio changes for SDM660
  Adding perf defconfig for SDM660.
  ARM: SDM: bringup changes for SDM660
  ARM: dts: msm: Enable global pagetable for gpu on SDM660
  power: qpnp-smb2: Use chg_param.smb_version in place of smb_version.
  ARM: dts: msm: SMP2P changes for sdm660
  soc: qcom: Force sequential boot for MSA modem
  Workaround: These are work around which need to de addressed
  soc: qcom: add snapshot of MBA based modem PIL
  defconfig : Enable QCOM_COMMAND_DB and QCOM_SECURE_BUFFER
  ARM: dts: msm: Add regulator property for SMMU nodes
  msm: kgsl: Add CX peak freq for Adreno512
  defconfig : Enable KGSL
  ARM: dts: msm: Enable WLED backlight
  defconfig : msm: Enable backlight configs
  msm: mdss: fix qseed3 op_mode register programming
  msm: mdss: Skip setting up Qseed3 for non-vig pipes
  msm: mdss: Change IOMMU map sequence during splash cleanup
  msm: mdss: share MDP smmu device mappings with other mdss clients
  msm: mdss: Add support for secure camera
  msm: mdss: Enable secure display and camera feature for msmcobalt
  Revert "power: qpnp-smb2: Use chg_param.smb_version in place of smb_version"
  msm: mdss: Initialize mdss v3 pp driver ops for msmfalcon
  Revert "soc: qcom: Remove legacy scm_call API support"
  msm: mdss: Add mdss capabilities for msmfalcon
  ARM: dts: msm: Add dt entry regulator-hw-type
  msm/sde/rotator: Add sdm660 MDP rev for rotator
  dtsi: dtsi changes
  defconfig: msm: Add sdm660_defconfig
  ARM: SDM: bringup changes for SDM660
  clk: qcom: Add snapshot of sdm660 clocks
  regulator: add snapshot of cpr3-regulator and dependent drivers
  mdss: 660.14 wA
  backlight: qcom-spmi-wled: Add compatible string for SDM660
  fbdev: msm: Do SMMU attach before buffer map
  msm: mdss: Separate PP programming to advanced and deferred modes
  msm: mdss: Add PA dither support for msmcobalt
  qcacld-3.0: Possible OOB write in rrm_process_radio_measurement_request
  Initial target definition for sdm660 on 4.14
  autoconf: new config files for sdm660
  qcacld-3.0: Fix buffer overflow in HTT MSG handling
  qcacld-3.0: set same IPA bandwidth for both cons and prod pipes
  iommu: arm-smmu: Fix dev_err formatting errors
  qcacmn: Fix incorrect ref counter of vdev
  qcacld-3.0: Dont create the session from add virt interface
  qcacmn: Fix ref leak of vdev if scan is rejected

Signed-off-by: UtsavBalar1231 <utsavbalar1231@gmail.com>
2020-06-07 09:59:18 +05:30