Files
kernel_xiaomi_raphael/techpack
UtsavBalar1231 4bb93d57cd Merge remote-tracking branch 'origin/auto-kernel' into auto-kernel-oss
* origin/auto-kernel:
  printk: filter out some spam
  dsp: q6afe: silence port id related logging
  drm: msm: silence FOD related logging
  compat: drop support for SUSE 15.1
  version: bump
  compat: backport ip_tunnel_parse_protocol and ip_tunnel_header_ops
  queueing: make use of ip_tunnel_parse_protocol
  device: implement header_ops->parse_protocol for AF_PACKET
  compat: SUSE 15.1 is the final SUSE we need to support
  compat: rhel 8.3 backported skb_reset_redirect
  receive: account for napi_gro_receive never returning GRO_DROP
  Fix compilation as part of upmerge from mainline
  version: bump
  ARM: dts: msm: Add support to enable/disable fastmap for each CB
  msm: ipa3: Add support to fastmap/geometry for each CB
  netns: workaround bad 5.2.y backport
  device: avoid circular netns references
  msm: camera: Do CSID reset during CSID release
  msm: vidc: Update VP9 minimum buffer count
  noise: do not assign initiation time in if condition
  ARM: dts: msm: Add rmtfs_sharedmem support for SDM429W
  ARM: dts: msm: enable pmic alarm thermal zone mitigation for Gen3 platform
  ARM: dts: msm: update gpu thermal zone threshold for auto Gen 3 platforms
  ARM: dts: msm: Remove low temperature monitor thermal zones for SA8195P
  soc: qcom: Remove WQ_MEM_RECLAIM from rmnet_ps_wq
  msm: camera: Remove frame id and timestamp checks for spurious SOF
  firmware: qcom: Reinitialize the ring buffer log pointer
  msm: sps: SPS driver changes for dummy BAM connect
  defconfig: trinket: Enable dm-snapshot
  usb: dwc3: Add boundary check while traversing the TRB ring buffer
  Kbuild: remove -fvisibility=hidden from cflags
  soc: qcom: hgsl: Update hfi command data structure
  ARM: dts: msm: add xo_clk for DP display on sm8150
  ARM: dts: msm: add link clk rcg entry on sm8150
  msm: camera: isp: Fix race condition b/w add and apply req
  Documentation: Add documentation for audio drivers
  char: virtio_fastrpc: Add profile mode support
  mhi: core: add mhi_device_get_sync_atomic() to wait until M0
  coresight-tmc: Add NULL check before using pointer 'etr_buf->ops'
  coresight: perf: Add NULL check before using pointer sink
  ARM: dts: msm: Enable Perst Based PCIe Enumeration for SA515M
  ARM: dts: msm: Add PCIe reset support for QCS405
  taskstats: extended taskstats2 with acct fields
  drm/msm/dsi-staging: disallow backlight update during panel mode switch
  ARM: dts: msm: Add STMMAC node for qcs405
  ipa3: Wait for IPA post init for 1000 msec before return
  ARM: dts: msm: Add restart driver to sdm429
  usb: pd: Use break instead of return after soft reset is done
  mtd: msm_qpic_nand: check for page_erased bit along with op_err
  ARM: dts: msm: Update display ram dump memory size
  clk: Add prepare lock in clk_populate_clock_opp_table
  msm: ep_pcie: Vote for pipe clk for early init case
  dma-buf: fill dmabuf->name in dma_buf_export
  disp: msm: dsi: Update mode population logic for POMS feature
  disp: msm: dsi: Fix the total number of modes calculation
  disp: msm: dsi: Add support to skip constant fps for command mode
  ARM: dts: msm: add override nodes for SA515M CDP board
  msm: ep_pcie: Update bit to read if the PHY is ready
  defconfig: sa2150p: Enable STMMAC driver
  net: stmmac: Fix type casting for tlmm addr
  compat: drop centos 8.1 support as 8.2 is now out
  net: stmmac: read descriptor count for IPA rx/tx from dt entry
  ARM: dts: msm: Add a flag to enable TSENS re-init
  ARM: dts: msm: Correct the spi pinctrl active node name
  ARM: dts: msm: update to memory map v1 for QCS610 and QCS410
  drm/msm/dsi-staging: Set transfer time to zero as per mode of timing node
  sched: Fix out of bounds issue in for_each_cluster macro
  wcnss: Include header file for show_stack()
  Revert "ARM: dts: msm: Move pil region of ipa fws for SA8155 VM "
  input: qpnp-power-on: Add a property to force hard-reset offset
  clk: qcom: mdss: Improve logging for 10nm dsi pll
  version: bump
  ARM: dts: msm: Enable STM coresight node for sdmshrike
  ARM: dts: msm: Enable ddr coresight nodes for sdmshrike
  ARM: dts: msm: Enable hwevents coresight nodes for sdmshrike
  ARM: dts: msm: Add coresight nodes for sdmshrike
  drm: msm: dsi-staging: Fix dsi-te-using-wd during POMS
  coresight: etx4x: sysfs: fix spinlock unlock issue
  ARM: dts: msm: Add smp2p based shutdown-ack
  ARM: dts: msm: update board-id for different linux variants
  drm/msm/shd: fix null pointer dereferenced
  drm/msm/sde: fix potential array index out of bounds
  block, bfq: fix use-after-free in bfq_idle_slice_timer_body
  net: stmmac: Fix reading IOMACRO por values
  mtd: msm_qpic_nand: Add a check to read an ONFI parameter page
  arm: dts: msm: set descriptor count to 512 for IPA channel
  ARM: dts: msm: Retain the copyright year
  usb: gadget: notify suspend clear to usb phy in udc
  defconfig: Increase command line size to 2048 for SDM429 BG
  arm: Make COMMAND_LINE_SIZE a kernel config option
  ARM: dts: msm: Remove low temperature monitor thermal zones for SA8155
  mhi: cntrl: qcom: Add EDL image to the firmware table
  drm: Check for lessee in DROP_MASTER ioctl
  compat: remove stale suse support
  ARM: dts: msm: Fix register offset to read PHY status
  ARM: dts: msm: Correct pinctrl console UART setting
  usb: f_cdev: USB remote wake up feature implementation for DUN
  compat: bionic-hwe-5.0/disco kernel backported skb_reset_redirect and ipv6 flow
  qemu: mark per_cpu_load_addr as static for gcc-10
  qemu: work around broken centos8 kernel
  compat: ubuntu appears to have backported ipv6_dst_lookup_flow
  qemu: patch in UTS_UBUNTU_RELEASE_ABI for Ubuntu detection
  qemu: support fetching kernels for arbitrary URLs
  ARM: dts: msm: Allow PM suspend irrespective of host RT state on SA8195
  msm: ais: Fix power up sequence of cci
  ARM: dts: msm: update UBWC highest bank bit for sdmshrike display
  ARM: dts: msm: update macro tile mode for sdmshrike display
  drivers: gnss: Suspend, resume handling for GNSS driver
  gnss: sirf: KPI marker for GNSS driver
  Revert "ARM: dts: qcom: Added metadata partition for UDC"
  arm64: dts: qcom: Drive strength reduction for GNSS UART GPIOs
  msm: ipa: fix ipa_disable_apps_wan_cons_deaggr declaration
  ARM: dts: msm: Added sdmshrike-pm
  defconfig: sa8155: Enable Android Low memory killer
  defconfig: sdmshrike: Enable Android Lowmemory killer
  iommu: arm-smmu: Make restore of smmu-context runtime detectable
  ARM: dts: msm: Add qfprom node for SA8195p
  defconfig: sdmshrike: Enable QFPROM driver for sdmshrike
  defconfig: Enable debug clock controller for sdmshrike
  ARM: dts: msm: Add the clock_debugcc node on sdmshrike
  clk: qcom: Add debug clock controller for sdmshrike
  ARM: dts: msm: fix missing header in display dtsi
  Add sdmshrike for supported platform
  Revert "msm: defconfig: Disable IPA for sm6150 auto"
  Revert "clk: qcom: update pll configs for all clock controllers"
  usb: config: Fix incorrect use of keywords

Signed-off-by: UtsavBalar1231 <utsavbalar1231@gmail.com>
2020-07-14 10:32:08 +05:30
..