Change List :
1. Enable fast_switch control in mixer_paths.xml
2. Enable cca module in platform configuration
Files from the latest attachment on b/280032926
Bug: 280032926
Test: verified by ntkuo@
Change-Id: I4cc42dd8e136494ac2d56a5ded6990832554c48f
Since MMWAVE power rail will be removed for SUB6 only sku (device without MMWAVE module),
remove this from partial system power reference.
Bug: 280383031
Test: Build and boot on device, verify device can boot to home and
thermal can launch
Change-Id: I8d612d8aca7282890b40c16a26c3fe6230691c44
Signed-off-by: Peter (YM) <peterym@google.com>
Sync most of config from P23 except thermal settings.
Bug: 279363521
Test: Boot to home
Test: adb shell logcat -b all | grep libperf
Change-Id: I3eb7f878a15ab6398aad19de6b91bdde30326cbe
The camera has separated the tuning files for the project,
correct the target_device as needed.
Bug: 274885499
Test: build pass
Change-Id: Ib39d790434742055d511137020170f9ff280ef0e
Add antenna position info for the new NFC API
Update default routing settings and remove legacy settings
Bug: 278992487
Test: manual
Change-Id: I2777daa5a2aa5470af8b3568b925b49348d8b29f
Akita do not have 32-bit address limitation in hardware, so
we would like to empty zone DMA32 for better performance and simplify
memory management.
Bug: 263239622
Test: Run reboot test 300+ locally and no issues observed
Change-Id: Ief1fba0bb63d59fed8bb865e7f1b7fc3edc8be41
Signed-off-by: Jack Lee <liangjlee@google.com>
This is for early bringup usage, based on the previous generation
devices.
Bug: 268589207
Test: build on device and boot to home
adb shell lshal debug android.hardware.thermal@2.0::IThermal/default
Change-Id: I33601a4048396e9e6ff9b055627c938cf6b272b1
Signed-off-by: Peter (YM) <peterym@google.com>
Upstream has fixed relationship between uclamp_min and margin which
means uclamp_min value between 80-100% of capacity of the CPU is a valid
value and will not cause upmigration.
To keep the current hints in powerhint.json the same, we must update
uclamp_min to be capacity_orig_of(medium_cpu) + 1.
This change is dependent on uclamp vs fits margin in GKI, vendor
modules. And an improvement in sched_pixel to ignore the 25% boost if
the only reason to request the frequency is uclamp_min.
To cater for the later - we multiply each uclamp_min value with 1.25
- except ones that look intentionally set around capacity boundaries.
Bug: 261695590
Test: UiBench
Signed-off-by: Qais Yousef <qyousef@google.com>
Change-Id: I959d4236990668aa82773ff05102b9ed28c0c1f9
Change List :
Fortemedia:
1. Sync P23 20230324 setting including MCPS.dat
2. Modify handheld mode from 3MIC to 2MIC solution
Files from the latest attachment on b/275675790
Bug: 275675790
Test: verified by ntkuo@
Change-Id: I6b26640b3d1fc81e03f6c6979b12b9ff99d9da4c
there are only mic1 and mic3.
Bug: 273188371
Test: builds
Change-Id: Ic06aee33d1967816d6290663f49c0d73e175800f
Signed-off-by: Robert Lee <lerobert@google.com>
Change list:
1. proto speaker model for both top and bottom speakers
2. New firmaware update (v6.81)
Files from the latest attachment on b/274402819
Bug: 274398722
Bug: 274402819
Test: verified by lerobert@
Change-Id: Ib2aad3324d9f870ea68d24a0018acb285f588baf
